Add input device support to the hotkey subdriver.
Hot keys that have a valid keycode mapping are reported through the input
layer if the input device is open. Otherwise, they will be reported as
ACPI events, as they were before.
Scan codes are reported (using EV_MSC MSC_SCAN events) along with EV_KEY
KEY_UNKNOWN events.
For backwards compatibility purposes, hot keys that used to be reported
through ACPI events are not mapped to anything meaningful by default.
Userspace is supposed to remap them if it wants to use the input device for
hot key reporting.
This patch is based on a patch by Richard Hughes <hughsient@gmail.com>.
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Cc: Richard Hughes <hughsient@gmail.com>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Register an input device to send input events to userspace.
This patch is based on a patch by Richard Hughes <hughsient@gmail.com>.
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Cc: Richard Hughes <hughsient@gmail.com>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Len Brown <len.brown@intel.com>
The change in the size of the hotkey mask, the hability to report the keys
that use the higher bits, and the addition of the hotkey_radio_sw attribute
are important enough features to warrant increasing the minor field of the
sysfs interface version.
Also, document a bit better how and when the thinkpad-acpi sysfs interface
version will be updated.
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
Some ThinkPad models, notably the T60 and X60, have a slider switch to
enable and disable the radios. The switch has the capability of
force-disabling the radios in hardware on most models, and it is supposed
to affect all radios (WLAN, WWAN, BlueTooth).
Export the switch state as a sysfs attribute, on ThinkPads where it is
available.
Thanks to Henning Schild for asking for this feature, and for tracking down
the EC register that holds the radio switch state.
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Cc: Henning Schild <henning@wh9.tu-dresden.de>
Signed-off-by: Len Brown <len.brown@intel.com>
The firmware knows how many hot keys it supports, so export this
information in a sysfs attribute.
And the driver knows which keys are always handled by the firmware in all
known ThinkPad models too, so export this information as well in a sysfs
attribute. Unless you know which events need to be handled in a passive
way, do *not* enable hotkeys that are always handled by the firmware.
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
Revise ACPI HKEY functionality to better interface with the firmware, and
enable up to 32 regular hotkeys, instead of just 16 of them. Ouch.
This takes care of most keys one used to have to do CMOS NVRAM polling on,
and should drop the need for tpb, thinkpad-keys, and other such 5Hz NVRAM
polling power vampires on most modern ThinkPads ;-)
And, just to add insult to injury, this was sort of working since forever
through the procfs interface, but nobody noticed or tried an echo
0xffffffff > /proc/acpi/ibm/hotkey and told me it would generate weird
events. ARGH!
Thanks to Richard Hughes for kicking off the work that ended up with this
discovery, and to Matthew Garret for calling my attention to the fact that
newer ThinkPads were indeed generating ACPI GPEs when such hot keys were
pressed.
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Cc: Richard Hughes <hughsient@gmail.com>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Signed-off-by: Len Brown <len.brown@intel.com>
Add DMI-based aliases to allow module autoloading on select thinkpads.
The aliases will do nothing unless the dmi-based-module-autoloading.patch
patch from Lennart Poettering <mzxreary@0pointer.de> is applied. Lennart's
patch has been accepted by greghk and will be merged eventually.
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Cc: Lennart Poettering <mzxreary@0pointer.de>
Signed-off-by: Len Brown <len.brown@intel.com>
The initial version of the thinkpad-acpi sysfs interface (not yet released
in any stable mainline kernel) made liberal use of named sysfs groups, in
order to get the attributes more organized.
This proved to be a really bad design decision. Maybe if attribute groups
were as flexible as a real directory, and if binary attributes were not
second-class citizens, the idea of subdirs and named groups would not have
been so bad.
This patch makes all the thinkpad-acpi sysfs groups anonymous (thus
removing the subdirs), adds the former group names as a prefix (so that
hotkey/enable becomes hotkey_enable for example), and updates the
documentation.
These changes will make the thinkpad-acpi sysfs ABI a lot easier to
maintain.
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
Add support to sysfs to the wan and bluetooth subdrivers.
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
The dock sub-driver has split-personality (two subdrivers), and it was
doing some unoptimal things on init because of that. Fix it so that the
second half of it will only init when necessary, and only if the first half
initialized sucessfully in the first place.
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
Some issues with the dock subdriver proved that a slightly improved
debugging setup for ACPI notifiers and handler helpers would be useful.
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
Currently, all fan control operations return ENXIO if unsupported
operations are requested, but return EINVAL if invalid fan modes are
requested on a given ThinkPad.
This is not strictly correct for sysfs, so map ENXIO to EINVAL in the sysfs
attribute store handlers, as we do benefit from the ENXIO in other parts of
the driver code.
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
The fan control watchdog was being called in one place even when the fan
control operation had failed. Fix it.
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
Do not enable/rearm the fan control safety watchdog if we would not be able
to do anything to the fan anyway.
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
Len Brown considers that an active by default fan control interface in
laptops may be too close to giving users enough rope. There is a good
chance he is quite correct on this, especially if someone decides to use
that interface in applets and users are not aware of its risks.
This patch adds a master switch to thinkpad-acpi that enables or disables
the entire fan-control feature as a module parameter: "fan_control". It
defaults to disabled. Set it to non-zero to enable fan control.
Also, the patch removes the expermiental status from fan control, since it
is stable enough to not be called experimental, and the master switch makes
it safe enough to do so.
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
Update the brightness sysfs interface (done through the backlight class) to
be in line with the rest of the thinkpad-acpi driver.
This renames the incorrect, un-obvious, and clash-prone name of "ibm" for
the backlight device to a much more fitting and descriptive
"thinkpad_screen". This is something I wanted to do for quite a while...
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
Add sysfs attributes to send ThinkPad CMOS commands.
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
The Linux ThinkPad community is not positive that all ThinkPads that do
HFSP EC fan control do implement full-speed and auto modes, some of the
earlier ones supporting HFSP might not.
If the EC ignores the AUTO or FULL-SPEED bits, it will pay attention to the
lower three bits that set the fan level. And as thinkpad-acpi was leaving
these set to zero, it would stop(!) the fan, which is Not A Good Thing.
So, as a safety net, we now make sure to also set the fan level part of the
HFSP register to speed 7 for full-speed, and a minimum of speed 4 for auto
mode.
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
Export sysfs attributes to monitor and control the internal thinkpad fan
(some thinkpads have more than one fan, but thinkpad-acpi doesn't support
the second fan yet). The sysfs interface follows the hwmon design guide
for fan devices.
Also, fix some stray "thermal" files in the fan procfs description that
have been there forever, and officially support "full-speed" as the name
for the PWM-disabled state of the fan controller to keep it in line with
the hwmon interface. It is much better a name for that mode than the
unobvious "disengaged" anyway. Change the procfs interface to also accept
full-speed as a fan level, but still report it as disengaged for backwards
compatibility.
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
Export thinkpad thermal sensors to sysfs, following the hwmon
specification for thermal monitoring sensors.
ThinkPad thermal monitoring is done by the EC. Sensors can show up or
disappear at runtime when they are inside hotswappable hardware, such as
batteries. Sensors that are not available return -ENXIO when accessed.
Up to 16 thermal sensors are supported on new firmware (but nobody has
reported a ThinkPad with more than 12 sensors so far), and 8 sensors are
supported on older firmware. Thermal sensor mapping is model-specific.
Precision varies, it is 1 degree Celcius on new ThinkPads, but higher on
some older models.
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
Add proper mutex locking to some data structures access subject to races
due to concurrent access of driver functions on the hotkey and fan
subdrivers.
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
Add infrastructure to deal with sysfs attributes and grouping, and helpers
for common sysfs parsing. Switch driver attributes to use them.
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
Add the sysfs attributes for the platform driver.
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
Register thinkpad-acpi platform driver and platform device for the device
model. Also register the platform device with the hwmon class.
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
Improve some of the fan watchdog error messages to be a little more
helpful.
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
Clean-up the thermal subdriver for sysfs conversion. Make thermal_get_*
reentrancy-safe while at it, and add the missing thermal_read_mode variable
to the header file.
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
Some ThinkPad CMOS commands subdriver cleanups, and also rename/promote
cmos_eval to a ACPI helper function, as it is used by many other
subdrivers.
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
Cleanup video subdriver for sysfs conversion, and properly check
result status of acpi_evalf.
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
Prepare bluetooth and wan driver code to be more easily hooked into sysfs
helpers, by separating the procfs logic from the device attribute handling.
These changes also remove the entries from procfs on notebooks without the
bluetooth/wan hardware installed.
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
Prepare the thinkpad-acpi driver for the conversion to the device
model, by renaming variables and doing other glue work that shall
make the later patches much cleaner.
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
Use a bitfield to hold boolean module-wide flags, to conserve some memory.
It is easy and it is clean, so we do it just for the heck of it even if it
saves very little space.
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
Save some memory by using bitfields to hold boolean flags for the
subdrivers.
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
Improve the detection of ThinkPads, so as to reduce the chances of false
positives.
Since this could potentially add false negatives on the very old models,
add a module parameter to force the detection of a thinkpad.
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
Move the .init method from ibms struct to another struct, and use a list
head to control which subdrivers have been activated.
This allows us to have the subdriver init methods marked __init, saving
quite a lot of .text size, and even a bit of .data size as some data can
now be made __initdata.
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
Add debug messages to the subdriver initialization and exit code.
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
Move most of the probing code to its own function, and most of the
subdriver-specific init code into subdriver init functions.
This allows us to not define pci_handle unless the dock subdriver is
enabled, as well.
This patch causes a minor userland interface change: if a subdriver doesn't
detect a capability, /proc entries for it are not created anymore (as
opposed to a /proc entry that just returned "unsupported").
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
Add a debug mode parameter and verbose debug mode Kconfig option.
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
Update some stuff in the in-code text describing the ThinkPad fan
firmware. This patch has no code changes.
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
Rename all IBMACPI_ constants, now that we are not called ibm-acpi anymore.
Driver-specific constants are now prefixed TPACPI_, ThinkPad firmware
specific ones are now prefixed TP_CMOS_, TP_ACPI_, or TP_EC_.
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
Rename module init and exit functions, now that we are not called ibm-acpi
anymore.
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
Rename a stray use of ibm-acpi on a comment, no functional changes.
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
Rename register_ibmacpi_subdriver to register_tpacpi_subdriver, as
we are not called ibmacpi anymore.
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
Cleanup documentation, driver strings and other misc stuff, now that the
driver is named "thinkpad-acpi".
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
Add a ibm_acpi module alias for userpace, so that modprobe ibm_acpi will
still load the correct driver. This alias can be removed in the future,
probably two years from now if nothing warrants removing it sooner.
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
Since ibm-acpi was renamed to thinkpad-acpi, rename and update its Kconfig
entries and Kconfig-related symbols accordingly.
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
Rename the ibm-acpi driver to thinkpad-acpi. ThinkPads are not even made
by IBM anymore, so it is high time to rename the driver...
The name thinkpad-acpi was used sometime ago by a thinkpad-specific hotkey
driver by Erik Rigtorp, around the 2.6.8-2.6.10 time frame. The driver
apparently never got merged into mainline (it did make some trips through
-mm). ibm-acpi was merged soon after, making its debut in 2.6.10.
The reuse of the thinkpad-acpi name shouldn't be a problem as far as user
confusion goes, as Erik's thinkpad-acpi apparently didn't get widespread
use in the Linux ThinkPad community and most hits for thinkpad-acpi in
google point to ibm-acpi anyway.
Erik, if you read this, please consider the reuse of the thinkpad-acpi name
as a compliment to your effort to make ThinkPads more useful to all of us.
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
