Merge support for the Platform Firmware Runtime Update and Telemetry
interface based on ACPI.
The interface provided here allows updating certain pieces of the
platform firmware without restarting the system and collecting
platform firmware telemetry data.
This also includes a utility for accesing the new interface from user
space.
* acpi-pfrut:
ACPI: pfr_telemetry: Fix info leak in pfrt_log_ioctl()
ACPI: pfr_update: Fix return value check in pfru_write()
ACPI: tools: Introduce utility for firmware updates/telemetry
ACPI: Introduce Platform Firmware Runtime Telemetry driver
ACPI: Introduce Platform Firmware Runtime Update device driver
efi: Introduce EFI_FIRMWARE_MANAGEMENT_CAPSULE_HEADER and corresponding structures
Introduce the pfr_update driver which can be used for Platform Firmware
Runtime code injection and driver update [1].
The user is expected to provide the EFI capsule, and pass it to the
driver by writing the capsule to a device special file. The capsule
is transferred by the driver to the platform firmware with the help
of an ACPI _DSM method under the special ACPI Platform Firmware
Runtime Update device (INTC1080), and the actual firmware update is
carried out by the low-level Management Mode code in the platform
firmware.
This change allows certain pieces of the platform firmware to be
updated on the fly while the system is running (runtime) without the
need to restart it, which is key in the cases when the system needs to
be available 100% of the time and it cannot afford the downtime related
to restarting it, or when the work carried out by the system is
particularly important, so it cannot be interrupted, and it is not
practical to wait until it is complete.
Link: https://uefi.org/sites/default/files/resources/Intel_MM_OS_Interface_Spec_Rev100.pdf # [1]
Tested-by: Hongyu Ning <hongyu.ning@intel.com>
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Without timeout reports, it is impossible to decode many protocols since
it is not known when the transmission ends. timeout reports are sent by
default, but can be turned off. There is no reason to turn them off, and
I cannot find any software which does this, so we can safely remove it.
This makes the ioctl LIRC_SET_REC_TIMEOUT_REPORTS a no-op.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The beginning part of the "existing HSV/HSL formats" table (line 7742)
reads:
.. raw:: latex
\begingroup
\tiny
\setlength{\tabcolsep}{2pt}
However, the ending part (line 7834) reads:
.. raw:: latex
\normalsize
Fix the imbalance by replacing the \normalsize with \endgroup.
Note:
Actually, the imbalance is harmless and just results in an
informative message near the bottom of userspace-api.log:
(\end occurred inside a group at level 1)
### semi simple group (level 1) entered at line 70696 (\begingroup)
### bottom level
Link: https://lore.kernel.org/linux-media/b3eeec4d-1a34-0a1a-3097-1ddea3b5f1c8@gmail.com
Signed-off-by: Akira Yokosawa <akiyks@gmail.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
V4L2_PIX_FMT_HM12 was redefined to V4L2_PIX_FMT_NV12_16L16, so use the
new name in libv4l-introduction.rst.
This fixes this warning:
libv4l-introduction.rst:27: WARNING: undefined label: v4l2-pix-fmt-hm12
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
CAPTURE buffers might be read by the hardware after they are dequeued,
which goes against the general idea that userspace has full control over
dequeued buffers. Explain why and document the restrictions that this
implies for userspace.
Signed-off-by: Alexandre Courbot <acourbot@chromium.org>
Acked-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Add the VP9 stateless decoder controls plus the documentation that goes
with it.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Co-developed-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Adrian Ratiu <adrian.ratiu@collabora.com>
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Co-developed-by: Daniel Almeida <daniel.almeida@collabora.com>
Signed-off-by: Daniel Almeida <daniel.almeida@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Improve the documentation for CEC_RECEIVE/TRANSMIT w.r.t. the
sequence and tx/rx_status fields.
Also remove a duplicate tx_status description.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Fix example code which has missing or double backslash typo.
Signed-off-by: Kwang Son <dev.kwang.son@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Add V4L2_COLORFX_SET_RGB color effects control, V4L2_CID_COLORFX_RGB
for RGB color setting.
with two mirror changes:
- change 0xFFFFFF to 0xffffff
- fix comments 2^24 to 2^24 - 1
[hverkuil: dropped spaces around + with V4L2_CID_BASE for consistency]
Signed-off-by: Dillon Min <dillon.minfei@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Here is the big set of char and misc and other tiny driver subsystem
updates for 5.16-rc1.
Loads of things in here, all of which have been in linux-next for a
while with no reported problems (except for one called out below.)
Included are:
- habanana labs driver updates, including dma_buf usage,
reviewed and acked by the dma_buf maintainers
- iio driver update (going through this tree not staging as they
really do not belong going through that tree anymore)
- counter driver updates
- hwmon driver updates that the counter drivers needed, acked by
the hwmon maintainer
- xillybus driver updates
- binder driver updates
- extcon driver updates
- dma_buf module namespaces added (will cause a build error in
arm64 for allmodconfig, but that change is on its way through
the drm tree)
- lkdtm driver updates
- pvpanic driver updates
- phy driver updates
- virt acrn and nitr_enclaves driver updates
- smaller char and misc driver updates
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYYPX2A8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymUUgCbB4EKysgLuXYdjUalZDx+vvZO4k0AniS14O4k
F+2dVSZ5WX6wumUzCaA6
=bXQM
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
"Here is the big set of char and misc and other tiny driver subsystem
updates for 5.16-rc1.
Loads of things in here, all of which have been in linux-next for a
while with no reported problems (except for one called out below.)
Included are:
- habanana labs driver updates, including dma_buf usage, reviewed and
acked by the dma_buf maintainers
- iio driver update (going through this tree not staging as they
really do not belong going through that tree anymore)
- counter driver updates
- hwmon driver updates that the counter drivers needed, acked by the
hwmon maintainer
- xillybus driver updates
- binder driver updates
- extcon driver updates
- dma_buf module namespaces added (will cause a build error in arm64
for allmodconfig, but that change is on its way through the drm
tree)
- lkdtm driver updates
- pvpanic driver updates
- phy driver updates
- virt acrn and nitr_enclaves driver updates
- smaller char and misc driver updates"
* tag 'char-misc-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (386 commits)
comedi: dt9812: fix DMA buffers on stack
comedi: ni_usb6501: fix NULL-deref in command paths
arm64: errata: Enable TRBE workaround for write to out-of-range address
arm64: errata: Enable workaround for TRBE overwrite in FILL mode
coresight: trbe: Work around write to out of range
coresight: trbe: Make sure we have enough space
coresight: trbe: Add a helper to determine the minimum buffer size
coresight: trbe: Workaround TRBE errata overwrite in FILL mode
coresight: trbe: Add infrastructure for Errata handling
coresight: trbe: Allow driver to choose a different alignment
coresight: trbe: Decouple buffer base from the hardware base
coresight: trbe: Add a helper to pad a given buffer area
coresight: trbe: Add a helper to calculate the trace generated
coresight: trbe: Defer the probe on offline CPUs
coresight: trbe: Fix incorrect access of the sink specific data
coresight: etm4x: Add ETM PID for Kryo-5XX
coresight: trbe: Prohibit trace before disabling TRBE
coresight: trbe: End the AUX handle on truncation
coresight: trbe: Do not truncate buffer on IRQ
coresight: trbe: Fix handling of spurious interrupts
...
-----BEGIN PGP SIGNATURE-----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=eLup
-----END PGP SIGNATURE-----
Merge tag 'media/v5.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- New driver for SK Hynix Hi-846 8M pixel camera
- New driver for the ov13b10 camera
- New driver for Renesas R-Car ISP
- mtk-vcodec gained support for version 2 of decoder firmware ABI
- The legacy sir_ir driver got removed
- videobuf2: the vb2_mem_ops kAPI had some improvements
- lots of cleanups, fixes and new features at device drivers
* tag 'media/v5.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (328 commits)
media: venus: core: Add sdm660 DT compatible and resource struct
media: dt-bindings: media: venus: Add sdm660 dt schema
media: venus: vdec: decoded picture buffer handling during reconfig sequence
media: venus: Handle fatal errors during encoding and decoding
media: venus: helpers: Add helper to mark fatal vb2 error
media: venus: hfi: Check for sys error on session hfi functions
media: venus: Make sys_error flag an atomic bitops
media: venus: venc: Use pmruntime autosuspend
media: allegro: write vui parameters for HEVC
media: allegro: nal-hevc: implement generator for vui
media: allegro: write correct colorspace into SPS
media: allegro: extract nal value lookup functions to header
media: allegro: correctly scale the bit rate in SPS
media: allegro: remove external QP table
media: allegro: fix row and column in response message
media: allegro: add control to disable encoder buffer
media: allegro: add encoder buffer support
media: allegro: add pm_runtime support
media: allegro: lookup VCU settings
media: allegro: fix module removal if initialization failed
...
- Move futex code into kernel/futex/ and split up the kitchen sink into
seperate files to make integration of sys_futex_waitv() simpler.
- Add a new sys_futex_waitv() syscall which allows to wait on multiple
futexes. The main use case is emulating Windows' WaitForMultipleObjects
which allows Wine to improve the performance of Windows Games. Also
native Linux games can benefit from this interface as this is a common
wait pattern for this kind of applications.
- Add context to ww_mutex_trylock() to provide a path for i915 to rework
their eviction code step by step without making lockdep upset until the
final steps of rework are completed. It's also useful for regulator and
TTM to avoid dropping locks in the non contended path.
- Lockdep and might_sleep() cleanups and improvements
- A few improvements for the RT substitutions.
- The usual small improvements and cleanups.
-----BEGIN PGP SIGNATURE-----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=RZ4x
-----END PGP SIGNATURE-----
Merge tag 'locking-core-2021-10-31' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Thomas Gleixner:
- Move futex code into kernel/futex/ and split up the kitchen sink into
seperate files to make integration of sys_futex_waitv() simpler.
- Add a new sys_futex_waitv() syscall which allows to wait on multiple
futexes.
The main use case is emulating Windows' WaitForMultipleObjects which
allows Wine to improve the performance of Windows Games. Also native
Linux games can benefit from this interface as this is a common wait
pattern for this kind of applications.
- Add context to ww_mutex_trylock() to provide a path for i915 to
rework their eviction code step by step without making lockdep upset
until the final steps of rework are completed. It's also useful for
regulator and TTM to avoid dropping locks in the non contended path.
- Lockdep and might_sleep() cleanups and improvements
- A few improvements for the RT substitutions.
- The usual small improvements and cleanups.
* tag 'locking-core-2021-10-31' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (44 commits)
locking: Remove spin_lock_flags() etc
locking/rwsem: Fix comments about reader optimistic lock stealing conditions
locking: Remove rcu_read_{,un}lock() for preempt_{dis,en}able()
locking/rwsem: Disable preemption for spinning region
docs: futex: Fix kernel-doc references
futex: Fix PREEMPT_RT build
futex2: Documentation: Document sys_futex_waitv() uAPI
selftests: futex: Test sys_futex_waitv() wouldblock
selftests: futex: Test sys_futex_waitv() timeout
selftests: futex: Add sys_futex_waitv() test
futex,arm: Wire up sys_futex_waitv()
futex,x86: Wire up sys_futex_waitv()
futex: Implement sys_futex_waitv()
futex: Simplify double_lock_hb()
futex: Split out wait/wake
futex: Split out requeue
futex: Rename mark_wake_futex()
futex: Rename: match_futex()
futex: Rename: hb_waiter_{inc,dec,pending}()
futex: Split out PI futex
...
-----BEGIN PGP SIGNATURE-----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=NmI1
-----END PGP SIGNATURE-----
Merge tag 'for-5.16/cdrom-2021-10-29' of git://git.kernel.dk/linux-block
Pull CDROM updates from Jens Axboe:
"On behalf of Phillip, here are the CDROM updates for the 5.16-rc1
merge window:
- Add ioctl for improved media change detection (Lukas)
- Reformat some documentation (Phillip)
- Redundant variable removal (luo)"
* tag 'for-5.16/cdrom-2021-10-29' of git://git.kernel.dk/linux-block:
cdrom: Remove redundant variable and its assignment
cdrom: docs: reformat table in Documentation/userspace-api/ioctl/cdrom.rst
drivers/cdrom: improved ioctl for media change detection
Add PTP_CLK_MAGIC to the userspace-api/ioctl/ioctl-number.rst
documentation file.
Fixes: d94ba80ebb ("ptp: Added a brand new class driver for ptp clocks.")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20211024163831.10200-1-rdunlap@infradead.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Most interesting element this time is the new chrdev based interface
for the counter subsystem. Affects all drivers. Some minor precursor
patches.
Major parts:
* Bring all the sysfs attribute setup into the counter core rather than
leaving it to individual drivers. Docs updates accompany these changes.
* Move various definitions to a uapi header as now needed from userspace.
* Add the chardev interface + extensive documentation and example tool
* Add new ABI needed to identify indexes needed for chrdev interface
* Implement new interface for the 104-quad-8
* Follow up deals with wrong path for documentation build
* Various trivial cleanups and missing feature additions related to this
series
-----BEGIN PGP SIGNATURE-----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=AaeD
-----END PGP SIGNATURE-----
Merge tag 'counter-for-5.16a-take2' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next
Jonathan writes:
First set of counter subsystem new feature support for the 5.16 cycle
Most interesting element this time is the new chrdev based interface
for the counter subsystem. Affects all drivers. Some minor precursor
patches.
Major parts:
* Bring all the sysfs attribute setup into the counter core rather than
leaving it to individual drivers. Docs updates accompany these changes.
* Move various definitions to a uapi header as now needed from userspace.
* Add the chardev interface + extensive documentation and example tool
* Add new ABI needed to identify indexes needed for chrdev interface
* Implement new interface for the 104-quad-8
* Follow up deals with wrong path for documentation build
* Various trivial cleanups and missing feature additions related to this
series
* tag 'counter-for-5.16a-take2' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio:
docs: counter: Include counter-chrdev kernel-doc to generic-counter.rst
counter: fix docum. build problems after filename change
counter: microchip-tcb-capture: Tidy up a false kernel-doc /** marking.
counter: 104-quad-8: Add IRQ support for the ACCES 104-QUAD-8
counter: 104-quad-8: Replace mutex with spinlock
counter: Implement events_queue_size sysfs attribute
counter: Implement *_component_id sysfs attributes
counter: Implement signalZ_action_component_id sysfs attribute
tools/counter: Create Counter tools
docs: counter: Document character device interface
counter: Add character device interface
counter: Move counter enums to uapi header
docs: counter: Update to reflect sysfs internalization
counter: Update counter.h comments to reflect sysfs internalization
counter: Internalize sysfs interface code
counter: stm32-timer-cnt: Provide defines for slave mode selection
counter: stm32-lptimer-cnt: Provide defines for clock polarities
Fix a VDUSE documentation build warning:
Documentation/userspace-api/vduse.rst:21: WARNING: Title underline too short.
Fixes: 7bc7f61897 ("Documentation: Add documentation for VDUSE")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Xie Yongji <xieyongji@bytedance.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: virtualization@lists.linux-foundation.org
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Link: https://lore.kernel.org/r/20211006202904.30241-1-rdunlap@infradead.org
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Xie Yongji <xieyongji@bytedance.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Add extra space to the first column of ioctl values table, and also realign
the text in the second column, to fix a documentation build warning
introduced by: commit 67f1e027c2 ("drivers/cdrom: improved ioctl for
media change detection")
Suggested-by: Randy Dunlap <rdunlap@infradead.org>
Fixes: 67f1e027c2 ("drivers/cdrom: improved ioctl for media change detection")
Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20211007231720.31997-1-phil@philpotter.co.uk
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This patch lets user-space request a non-coherent memory
allocation during CREATE_BUFS and REQBUFS ioctl calls.
= CREATE_BUFS
struct v4l2_create_buffers has seven 4-byte reserved areas,
so reserved[0] is renamed to ->flags. The struct, thus, now
has six reserved 4-byte regions.
= CREATE_BUFS32
struct v4l2_create_buffers32 has seven 4-byte reserved areas,
so reserved[0] is renamed to ->flags. The struct, thus, now
has six reserved 4-byte regions.
= REQBUFS
We use one byte of a 4 byte ->reserved[1] member of struct
v4l2_requestbuffers. The struct, thus, now has reserved 3 bytes.
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
By setting or clearing the V4L2_MEMORY_FLAG_NON_COHERENT flag
user-space should be able to hint vb2 that either non-coherent
(if supported) or coherent memory should be used for the buffer
allocation.
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The uvc driver relies on the camera firmware to keep the control states
and therefore is not capable of changing an inactive control.
Allow returning -EACCES in those cases.
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Add documentation for the V4L2_CID_NOTIFY_GAINS control.
This control is required by sensors that need to know what colour
gains will be applied to pixels by downstream processing (such as by
an ISP), though the sensor does not apply these gains itself.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Add Mediatek's non-compressed 8 bit block video mode. This format is
produced by the MT8183 codec and can be converted to a non-proprietary
format by the MDP3 component.
Signed-off-by: Alexandre Courbot <acourbot@chromium.org>
Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Add more information about V4L2_PIX_FMT_NV12MT and
V4L2_PIX_FMT_NV12M_16X16, so it's clearer for driver authors and users.
Also, group the two pixel formats with the other tiled formats,
for clarity.
Unlike the recently introduced tiled formats (V4L2_PIX_FMT_NV12_4L4, etc)
these formats have remained Samsung-specific until now. Therefore, and
although the NV12MT and NV12MT_16X16 nomenclatures are less clear, we are
keeping them as-is.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
This format is produced by VeriSilicon Hantro G2 and VC8000D cores.
It is a simple 4x4 tiling layout in a linear way.
The pixel format was introduced by GStreamer using FourCC VT12,
so let's stick to it.
Link: https://gstreamer.freedesktop.org/documentation/video/video-format.html
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The V4L2_PIX_FMT_HM12 format is actually a simple NV12 tiled format,
with 16x16 linear tiles. Rename the format and move its documentation
together with the other tiled NV12 formats.
Keep V4L2_PIX_FMT_HM12 for application compatibility.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The V4L2_PIX_FMT_SUNXI_TILED_NV12 format is actually a fairly
common NV12 tiled format, with 32x32 linear tiles. Rename the format
and move its documentation together with the other tiled NV12 formats.
Keep V4L2_PIX_FMT_SUNXI_TILED_NV12 for application compatibility.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
HEVC scaling lists are used for the scaling process for transform
coefficients.
V4L2_HEVC_SPS_FLAG_SCALING_LIST_ENABLED has to set when they are
encoded in the bitstream.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The current implementation of the CDROM_MEDIA_CHANGED ioctl relies on
global state, meaning that only one process can detect a disc change
while the ioctl call will return 0 for other calling processes afterwards
(see bug 213267).
This introduces a new cdrom ioctl, CDROM_TIMED_MEDIA_CHANGE, that
works by maintaining a timestamp of the last detected disc change instead
of a boolean flag: Processes calling this ioctl command can provide
a timestamp of the last disc change known to them and receive
an indication whether the disc was changed since then and the updated
timestamp.
I considered fixing the buggy behavior in the original
CDROM_MEDIA_CHANGED ioctl but that would require maintaining state
for each calling process in the kernel, which seems like a worse
solution than introducing this new ioctl.
Signed-off-by: Lukas Prediger <lumip@lumip.de>
Link: https://lore.kernel.org/all/20210912191207.74449-1-lumip@lumip.de
Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
Link: https://lore.kernel.org/r/20210913230942.1188-1-phil@philpotter.co.uk
Signed-off-by: Jens Axboe <axboe@kernel.dk>
vduse driver supporting blk
virtio-vsock support for end of record with SEQPACKET
vdpa: mac and mq support for ifcvf and mlx5
vdpa: management netlink for ifcvf
virtio-i2c, gpio dt bindings
misc fixes, cleanups
NB: when merging this with
b542e383d8 ("eventfd: Make signal recursion protection a task bit")
from Linus' tree, replace eventfd_signal_count with
eventfd_signal_allowed, and drop the export of eventfd_wake_count from
("eventfd: Export eventfd_wake_count to modules").
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmE1+awPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpt6EIAJy0qrc62lktNA0IiIVJSLbUbTMmFj8MzkGR
8UxZdhpjWqBPJPyaOuNeksAqTGm/UAPEYx3C2c95Jhej7anFpy7dbCtIXcPHLJME
DjcJg+EDrlNCj8m0FcsHpHWsFzPMERJpyEZNxgB5WazQbv+yWhGrg2FN5DCnF0Ro
ZFYeKSVty148pQ0nHl8X0JM2XMtqit+O+LvKN2HQZ+fubh7BCzMxzkHY0QLHIzUS
UeZqd3Qm8YcbqnlX38P5D6k+NPiTEgknmxaBLkPxg6H3XxDAmaIRFb8Ldd1rsgy1
zTLGDiSGpVDIpawRnuEAzqJThV3Y5/MVJ1WD+mDYQ96tmhfp+KY=
=DBH/
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio updates from Michael Tsirkin:
- vduse driver ("vDPA Device in Userspace") supporting emulated virtio
block devices
- virtio-vsock support for end of record with SEQPACKET
- vdpa: mac and mq support for ifcvf and mlx5
- vdpa: management netlink for ifcvf
- virtio-i2c, gpio dt bindings
- misc fixes and cleanups
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (39 commits)
Documentation: Add documentation for VDUSE
vduse: Introduce VDUSE - vDPA Device in Userspace
vduse: Implement an MMU-based software IOTLB
vdpa: Support transferring virtual addressing during DMA mapping
vdpa: factor out vhost_vdpa_pa_map() and vhost_vdpa_pa_unmap()
vdpa: Add an opaque pointer for vdpa_config_ops.dma_map()
vhost-iotlb: Add an opaque pointer for vhost IOTLB
vhost-vdpa: Handle the failure of vdpa_reset()
vdpa: Add reset callback in vdpa_config_ops
vdpa: Fix some coding style issues
file: Export receive_fd() to modules
eventfd: Export eventfd_wake_count to modules
iova: Export alloc_iova_fast() and free_iova_fast()
virtio-blk: remove unneeded "likely" statements
virtio-balloon: Use virtio_find_vqs() helper
vdpa: Make use of PFN_PHYS/PFN_UP/PFN_DOWN helper macro
vsock_test: update message bounds test for MSG_EOR
af_vsock: rename variables in receive loop
virtio/vsock: support MSG_EOR bit processing
vhost/vsock: support MSG_EOR bit processing
...
VDUSE (vDPA Device in Userspace) is a framework to support
implementing software-emulated vDPA devices in userspace. This
document is intended to clarify the VDUSE design and usage.
Signed-off-by: Xie Yongji <xieyongji@bytedance.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20210831103634.33-14-xieyongji@bytedance.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This VDUSE driver enables implementing software-emulated vDPA
devices in userspace. The vDPA device is created by
ioctl(VDUSE_CREATE_DEV) on /dev/vduse/control. Then a char device
interface (/dev/vduse/$NAME) is exported to userspace for device
emulation.
In order to make the device emulation more secure, the device's
control path is handled in kernel. A message mechnism is introduced
to forward some dataplane related control messages to userspace.
And in the data path, the DMA buffer will be mapped into userspace
address space through different ways depending on the vDPA bus to
which the vDPA device is attached. In virtio-vdpa case, the MMU-based
software IOTLB is used to achieve that. And in vhost-vdpa case, the
DMA buffer is reside in a userspace memory region which can be shared
to the VDUSE userspace processs via transferring the shmfd.
For more details on VDUSE design and usage, please see the follow-on
Documentation commit.
NB(mst): when merging this with
b542e383d8 ("eventfd: Make signal recursion protection a task bit")
replace eventfd_signal_count with eventfd_signal_allowed,
and drop the previous
("eventfd: Export eventfd_wake_count to modules").
Signed-off-by: Xie Yongji <xieyongji@bytedance.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20210831103634.33-13-xieyongji@bytedance.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----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=PQpb
-----END PGP SIGNATURE-----
Merge tag 'media/v5.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- new sensor drivers: imx335, imx412, ov9282
- new IR transmitter driver: meson-ir-tx
- handro driver gained support for H.264 for Rockchip VDPU2
- imx gained support for i.MX8MQ
- ti-vpe has gained support for other SoC variants
- lots of cleanups, fixes, board additions and doc improvements
* tag 'media/v5.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (195 commits)
media: venus: venc: add support for V4L2_CID_MPEG_VIDEO_H264_8X8_TRANSFORM control
media: venus: venc: Add support for intra-refresh period
media: v4l2-ctrls: Add intra-refresh period control
media: docs: ext-ctrls-codec: Document cyclic intra-refresh zero control value
media: venus: helper: do not set constrained parameters for UBWC
media: venus: venc: Fix potential null pointer dereference on pointer fmt
media: venus: hfi: fix return value check in sys_get_prop_image_version()
media: tegra-cec: Handle errors of clk_prepare_enable()
media: cec-pin: rename timer overrun variables
media: TDA1997x: report -ENOLINK after disconnecting HDMI source
media: TDA1997x: fix tda1997x_query_dv_timings() return value
media: Fix cosmetic error in TDA1997x driver
media: v4l2-dv-timings.c: fix wrong condition in two for-loops
media: imx: add a driver for i.MX8MQ mipi csi rx phy and controller
media: dt-bindings: media: document the nxp,imx8mq-mipi-csi2 receiver phy and controller
media: imx: imx7_mipi_csis: convert some switch cases to the default
media: imx: imx7-media-csi: Fix buffer return upon stream start failure
media: imx: imx7-media-csi: Don't set PIXEL_BIT in CSICR1
media: imx: imx7-media-csi: Set TWO_8BIT_SENSOR for >= 10-bit formats
media: dt-bindings: media: nxp,imx7-csi: Add i.MX8MM support
...
-----BEGIN PGP SIGNATURE-----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=4uWF
-----END PGP SIGNATURE-----
Merge tag 'for-5.15/drivers-2021-08-30' of git://git.kernel.dk/linux-block
Pull block driver updates from Jens Axboe:
"Sitting on top of the core block changes, here are the driver changes
for the 5.15 merge window:
- NVMe updates via Christoph:
- suspend improvements for devices with an HMB (Keith Busch)
- handle double completions more gacefull (Sagi Grimberg)
- cleanup the selects for the nvme core code a bit (Sagi Grimberg)
- don't update queue count when failing to set io queues (Ruozhu Li)
- various nvmet connect fixes (Amit Engel)
- cleanup lightnvm leftovers (Keith Busch, me)
- small cleanups (Colin Ian King, Hou Pu)
- add tracing for the Set Features command (Hou Pu)
- CMB sysfs cleanups (Keith Busch)
- add a mutex_destroy call (Keith Busch)
- remove lightnvm subsystem. It's served its purpose and ultimately
led to zoned nvme support, we no longer need it (Christoph)
- revert floppy O_NDELAY fix (Denis)
- nbd fixes (Hou, Pavel, Baokun)
- nbd locking fixes (Tetsuo)
- nbd device removal fixes (Christoph)
- raid10 rcu warning fix (Xiao)
- raid1 write behind fix (Guoqing)
- rnbd fixes (Gioh, Md Haris)
- misc fixes (Colin)"
* tag 'for-5.15/drivers-2021-08-30' of git://git.kernel.dk/linux-block: (42 commits)
Revert "floppy: reintroduce O_NDELAY fix"
raid1: ensure write behind bio has less than BIO_MAX_VECS sectors
md/raid10: Remove unnecessary rcu_dereference in raid10_handle_discard
nbd: remove nbd->destroy_complete
nbd: only return usable devices from nbd_find_unused
nbd: set nbd->index before releasing nbd_index_mutex
nbd: prevent IDR lookups from finding partially initialized devices
nbd: reset NBD to NULL when restarting in nbd_genl_connect
nbd: add missing locking to the nbd_dev_add error path
nvme: remove the unused NVME_NS_* enum
nvme: remove nvm_ndev from ns
nvme: Have NVME_FABRICS select NVME_CORE instead of transport drivers
block: nbd: add sanity check for first_minor
nvmet: check that host sqsize does not exceed ctrl MQES
nvmet: avoid duplicate qid in connect cmd
nvmet: pass back cntlid on successful completion
nvme-rdma: don't update queue count when failing to set io queues
nvme-tcp: don't update queue count when failing to set io queues
nvme-tcp: pair send_mutex init with destroy
nvme: allow user toggling hmb usage
...
A stop gap for potential future speculation related hardware
vulnerabilities and a mechanism for truly security paranoid
applications.
It allows a task to request that the L1D cache is flushed when the kernel
switches to a different mm. This can be requested via prctl().
Changes vs. the previous versions:
- Get rid of the software flush fallback
- Make the handling consistent with other mitigations
- Kill the task when it ends up on a SMT enabled core which defeats the
purpose of L1D flushing obviously
-----BEGIN PGP SIGNATURE-----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=27wH
-----END PGP SIGNATURE-----
Merge tag 'x86-cpu-2021-08-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cache flush updates from Thomas Gleixner:
"A reworked version of the opt-in L1D flush mechanism.
This is a stop gap for potential future speculation related hardware
vulnerabilities and a mechanism for truly security paranoid
applications.
It allows a task to request that the L1D cache is flushed when the
kernel switches to a different mm. This can be requested via prctl().
Changes vs the previous versions:
- Get rid of the software flush fallback
- Make the handling consistent with other mitigations
- Kill the task when it ends up on a SMT enabled core which defeats
the purpose of L1D flushing obviously"
* tag 'x86-cpu-2021-08-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
Documentation: Add L1D flushing Documentation
x86, prctl: Hook L1D flushing in via prctl
x86/mm: Prepare for opt-in based L1D flush in switch_mm()
x86/process: Make room for TIF_SPEC_L1D_FLUSH
sched: Add task_work callback for paranoid L1D flush
x86/mm: Refactor cond_ibpb() to support other use cases
x86/smp: Add a per-cpu view of SMT state
Lightnvm supports the OCSSD 1.x and 2.0 specs which were early attempts
to produce Open Channel SSDs and never made it into the NVMe spec
proper. They have since been superceeded by NVMe enhancements such
as ZNS support. Remove the support per the deprecation schedule.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210812132308.38486-1-hch@lst.de
Reviewed-by: Matias Bjørling <mb@lightnvm.io>
Reviewed-by: Javier González <javier@javigon.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a control to set intra-refresh period.
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
In all drivers _CYCLIC_INTRA_REFRESH_MB default control value is zero
which means that the macroblocks will not be intra-refreshed. Document
this _CYCLIC_INTRA_REFRESH_MB control behaviour in control description.
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Improve the documentation of the frame rate configuration so that it can
be understood by a regular human being.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The V4L2_CID_PIXEL_RATE is nowadays used to tell pixel sampling rate in
the sub-device's pixel array, not the pixel rate over a link (for which it
also becomes unfit with the addition of multiplexed streams later on). Fix
this.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Andrey Konovalov <andrey.konovalov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Fix kerneldoc syntax in v4l2-async. The references were not produced
correctly.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Modernise the documentation to make it more precise and update the use of
pixel rate control and various other changes. In particular:
- Use non-proportional font for file names, properties as well as
controls.
- The unit of the HBLANK control is pixels, not lines.
- The unit of PIXEL_RATE control is pixels per second, not Hz.
- Merge common requirements for CSI-2 and parallel busses.
- Include all DT properties needed for assigned clocks.
- Fix referencing the link rate control.
- SMIA driver's new name is CCS driver.
- The PIXEL_RATE control denotes pixel rate on the pixel array on camera
sensors. Do not suggest it is used to tell the maximum pixel rate on the
bus anymore.
- Improve ReST syntax (plain struct and function names).
- Remove the suggestion to use s_power() in receiver drivers.
- Make MIPI website URL use HTTPS, add Wikipedia links to BT.601 and
BT.656.
Fixes: e4cf8c58af ("media: Documentation: media: Document how to write camera sensor drivers")
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Andrey Konovalov <andrey.konovalov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Add documentation of l1d flushing, explain the need for the
feature and how it can be used.
Signed-off-by: Balbir Singh <sblbir@amazon.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20210108121056.21940-6-sblbir@amazon.com
If HEVC frame consists of multiple slices, segment address has to be
known in order to properly decode it.
Add segment address field to slice parameters.
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Fix typo in a define: CEC_OP_REC_SEQ_SATERDAY -> CEC_OP_REC_SEQ_SATURDAY
This isn't used yet in actual applications to the best of my knowledge,
and it certainly doesn't break the ABI since the value doesn't change.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Here is the big set of char / misc and other driver subsystem updates
for 5.14-rc1. Included in here are:
- habanna driver updates
- fsl-mc driver updates
- comedi driver updates
- fpga driver updates
- extcon driver updates
- interconnect driver updates
- mei driver updates
- nvmem driver updates
- phy driver updates
- pnp driver updates
- soundwire driver updates
- lots of other tiny driver updates for char and misc drivers
This is looking more and more like the "various driver subsystems mushed
together" tree...
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYOM8jQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymECgCg0yL+8WxDKO5Gg5llM5PshvLB1rQAn0y5pDgg
nw78LV3HQ0U7qaZBtI91
=x+AR
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc driver updates from Greg KH:
"Here is the big set of char / misc and other driver subsystem updates
for 5.14-rc1. Included in here are:
- habanalabs driver updates
- fsl-mc driver updates
- comedi driver updates
- fpga driver updates
- extcon driver updates
- interconnect driver updates
- mei driver updates
- nvmem driver updates
- phy driver updates
- pnp driver updates
- soundwire driver updates
- lots of other tiny driver updates for char and misc drivers
This is looking more and more like the "various driver subsystems
mushed together" tree...
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (292 commits)
mcb: Use DEFINE_RES_MEM() helper macro and fix the end address
PNP: moved EXPORT_SYMBOL so that it immediately followed its function/variable
bus: mhi: pci-generic: Add missing 'pci_disable_pcie_error_reporting()' calls
bus: mhi: Wait for M2 state during system resume
bus: mhi: core: Fix power down latency
intel_th: Wait until port is in reset before programming it
intel_th: msu: Make contiguous buffers uncached
intel_th: Remove an unused exit point from intel_th_remove()
stm class: Spelling fix
nitro_enclaves: Set Bus Master for the NE PCI device
misc: ibmasm: Modify matricies to matrices
misc: vmw_vmci: return the correct errno code
siox: Simplify error handling via dev_err_probe()
fpga: machxo2-spi: Address warning about unused variable
lkdtm/heap: Add init_on_alloc tests
selftests/lkdtm: Enable various testable CONFIGs
lkdtm: Add CONFIG hints in errors where possible
lkdtm: Enable DOUBLE_FAULT on all architectures
lkdtm/heap: Add vmalloc linear overflow test
lkdtm/bugs: XFAIL UNALIGNED_LOAD_STORE_WRITE
...
The close on exec flag is O_CLOEXEC, not O_EXEC. This patch just fixes
the typo.
Suggested-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Rodrigo Campos <rodrigo@kinvolk.io>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Fixes: 0ae71c7720 ("seccomp: Support atomic "addfd + send reply"")
Link: https://lore.kernel.org/r/20210702151927.263402-1-rodrigo@kinvolk.io