Commit Graph

12097 Commits

Author SHA1 Message Date
Hillf Danton
67d955383a sched: Remove noop in next_prio()
When computing the next priority for a given run-queue, the check for
RT priority of the task determined by the pick_next_highest_task_rt()
function could be removed, since only RT tasks are returned by the
function.

Reviewed-by: Yong Zhang <yong.zhang0@gmail.com>
Signed-off-by: Hillf Danton <dhillf@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/BANLkTimxmWiof9s5AvS3v_0X+sMiE=0x5g@mail.gmail.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-08-14 12:00:45 +02:00
Mike Galbraith
c350a04efd sched: fix broken SCHED_RESET_ON_FORK handling
Setting child->prio = current->normal_prio _after_ SCHED_RESET_ON_FORK has
been handled for an RT parent gives birth to a deranged mutant child with
non-RT policy, but RT prio and sched_class.

Move PI leakage protection up, always set priorities and weight, and if the
child is leaving RT class, reset rt_priority to the proper value.

Signed-off-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1311779695.8691.2.camel@marge.simson.net
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-08-14 12:00:43 +02:00
Yong Zhang
2c2efaed9b sched: Kill WAKEUP_PREEMPT
Remove the WAKEUP_PREEMPT feature, disabling it doesn't make any sense
and its outlived its use by a long long while.

Signed-off-by: Yong Zhang <yong.zhang0@gmail.com>
Acked-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20110729082033.GB12106@zhy
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-08-14 12:00:41 +02:00
Jan H. Schönherr
e2b245f89e sched: Remove rq->avg_load_per_task
Since commit a2d47777 ("sched: fix stale value in average load per task")
the variable rq->avg_load_per_task is no longer required. Remove it.

Signed-off-by: Jan H. Schönherr <schnhrr@cs.tu-berlin.de>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1312189408-17172-1-git-send-email-schnhrr@cs.tu-berlin.de
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-08-14 11:55:24 +02:00
Vasiliy Kulikov
72fa59970f move RLIMIT_NPROC check from set_user() to do_execve_common()
The patch http://lkml.org/lkml/2003/7/13/226 introduced an RLIMIT_NPROC
check in set_user() to check for NPROC exceeding via setuid() and
similar functions.

Before the check there was a possibility to greatly exceed the allowed
number of processes by an unprivileged user if the program relied on
rlimit only.  But the check created new security threat: many poorly
written programs simply don't check setuid() return code and believe it
cannot fail if executed with root privileges.  So, the check is removed
in this patch because of too often privilege escalations related to
buggy programs.

The NPROC can still be enforced in the common code flow of daemons
spawning user processes.  Most of daemons do fork()+setuid()+execve().
The check introduced in execve() (1) enforces the same limit as in
setuid() and (2) doesn't create similar security issues.

Neil Brown suggested to track what specific process has exceeded the
limit by setting PF_NPROC_EXCEEDED process flag.  With the change only
this process would fail on execve(), and other processes' execve()
behaviour is not changed.

Solar Designer suggested to re-check whether NPROC limit is still
exceeded at the moment of execve().  If the process was sleeping for
days between set*uid() and execve(), and the NPROC counter step down
under the limit, the defered execve() failure because NPROC limit was
exceeded days ago would be unexpected.  If the limit is not exceeded
anymore, we clear the flag on successful calls to execve() and fork().

The flag is also cleared on successful calls to set_user() as the limit
was exceeded for the previous user, not the current one.

Similar check was introduced in -ow patches (without the process flag).

v3 - clear PF_NPROC_EXCEEDED on successful calls to set_user().

Reviewed-by: James Morris <jmorris@namei.org>
Signed-off-by: Vasiliy Kulikov <segoon@openwall.com>
Acked-by: NeilBrown <neilb@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-08-11 11:24:42 -07:00
Linus Torvalds
1d229d54db Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  perf symbols: Check '/tmp/perf-' symbol file ownership
  perf sched: Usage leftover from trace -> script rename
  perf sched: Do not delete session object prematurely
  perf tools: Check $HOME/.perfconfig ownership
  perf, x86: Add model 45 SandyBridge support
  perf tools: Add support to install perf python extension
  perf tools: do not look at ./config for configuration
  perf tools: Make clean leaves some files
  perf lock: Dropping unsupported ':r' modifier
  perf probe: Fix coredump introduced by probe module option
  jump label: Reduce the cycle count by changing the link order
  perf report: Use ui__warning in some more places
  perf python: Add PERF_RECORD_{LOST,READ,SAMPLE} routine tables
  perf evlist: Introduce 'disable' method
  trace events: Update version number reference to new 3.x scheme for EVENT_POWER_TRACING_DEPRECATED
  perf buildid-cache: Zero out buffer of filenames when adding/removing buildid
2011-08-11 09:03:48 -07:00
Jonathan Nieder
f2c0d0266c cap_syslog: don't use WARN_ONCE for CAP_SYS_ADMIN deprecation warning
syslog-ng versions before 3.3.0beta1 (2011-05-12) assume that
CAP_SYS_ADMIN is sufficient to access syslog, so ever since CAP_SYSLOG
was introduced (2010-11-25) they have triggered a warning.

Commit ee24aebffb ("cap_syslog: accept CAP_SYS_ADMIN for now")
improved matters a little by making syslog-ng work again, just keeping
the WARN_ONCE().  But still, this is a warning that writes a stack trace
we don't care about to syslog, sets a taint flag, and alarms sysadmins
when nothing worse has happened than use of an old userspace with a
recent kernel.

Convert the WARN_ONCE to a printk_once to avoid that while continuing to
give userspace developers a hint that this is an unwanted
backward-compatibility feature and won't be around forever.

Reported-by: Ralf Hildebrandt <ralf.hildebrandt@charite.de>
Reported-by: Niels <zorglub_olsen@hotmail.com>
Reported-by: Paweł Sikora <pluto@agmk.net>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Liked-by: Gergely Nagy <algernon@madhouse-project.org>
Acked-by: Serge Hallyn <serge@hallyn.com>
Acked-by: James Morris <jmorris@namei.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-08-09 18:22:22 -07:00
Jason Baron
b77f0f3c1f jump label: Reduce the cycle count by changing the link order
In the course of testing jump labels for use with the CFS
bandwidth controller, Paul Turner, discovered that using jump
labels reduced the branch count and the instruction count, but
did not reduce the cycle count or wall time.

I noticed that having the jump_label.o included in the kernel
but not used in any way still caused this increase in cycle
count and wall time. Thus, I moved jump_label.o in the
kernel/Makefile, thus changing the link order, and presumably
moving it out of hot icache areas. This brought down the cycle
count/time as expected.

In addition to Paul's testing,  I've tested the patch using a
single 'static_branch()' in the getppid() path, and basically
running tight loops of calls to getppid(). Here are my results
for the branch disabled case:

With jump labels turned on (CONFIG_JUMP_LABEL), branch disabled:

 Performance counter stats for 'bash -c /tmp/getppid;true' (50 runs):

     3,969,510,217 instructions             #	   0.864 IPC     ( +-0.000% )
     4,592,334,954 cycles                     ( +-   0.046% )
       751,634,470 branches                   ( +-   0.000% )

        1.722635797  seconds time elapsed   ( +-   0.046% )

Jump labels turned off (CONFIG_JUMP_LABEL not set), branch
disabled:

 Performance counter stats for 'bash -c /tmp/getppid;true' (50 runs):

     4,009,611,846 instructions             #	   0.867 IPC     ( +-0.000% )
     4,622,210,580 cycles                     ( +-   0.012% )
       771,662,904 branches                   ( +-   0.000% )

        1.734341454  seconds time elapsed   ( +-   0.022% )

Signed-off-by: Jason Baron <jbaron@redhat.com>
Cc: rth@redhat.com
Cc: a.p.zijlstra@chello.nl
Cc: rostedt@goodmis.org
Link: http://lkml.kernel.org/r/20110805204040.GG2522@redhat.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Tested-by: Paul Turner <pjt@google.com>
2011-08-05 23:57:33 +02:00
Ingo Molnar
3272cab406 Merge branch 'linus' into perf/urgent
Merge reason: Include most of the merge window trees, to do fixes on top.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-08-05 10:33:55 +02:00
Linus Torvalds
f03683b8fb Merge branch 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  slab, lockdep: Annotate the locks before using them
  lockdep: Clear whole lockdep_map on initialization
  slab, lockdep: Annotate slab -> rcu -> debug_object -> slab
  lockdep: Fix up warning
  lockdep: Fix trace_hardirqs_on_caller()
  futex: Fix regression with read only mappings
2011-08-04 16:44:04 -10:00
Tejun Heo
f59de8992a lockdep: Clear whole lockdep_map on initialization
lockdep_init_map() only initializes parts of lockdep_map and triggers
kmemcheck warning when it is copied as a whole.  There isn't anything
to be gained by clearing selectively.  memset() the whole structure
and remove loop for ->class_cache[] clearing.

Addresses https://bugzilla.kernel.org/show_bug.cgi?id=35532

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-and-tested-by: Christian Casteyde <casteyde.christian@free.fr>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=35532
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20110714131909.GJ3455@htj.dyndns.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-08-04 10:17:56 +02:00
Peter Zijlstra
70a0686a72 lockdep: Fix up warning
On Sun, 2011-07-24 at 21:06 -0400, Arnaud Lacombe wrote:

> /src/linux/linux/kernel/lockdep.c: In function 'mark_held_locks':
> /src/linux/linux/kernel/lockdep.c:2471:31: warning: comparison of
> distinct pointer types lacks a cast

The warning is harmless in this case, but the below makes it go away.

Reported-by: Arnaud Lacombe <lacombar@gmail.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1311588599.2617.56.camel@laptop
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-08-04 10:17:41 +02:00
Peter Zijlstra
7d36b26be0 lockdep: Fix trace_hardirqs_on_caller()
Commit dd4e5d3ac4 ("lockdep: Fix trace_[soft,hard]irqs_[on,off]()
recursion") made a bit of a mess of the various checks and error
conditions.

In particular it moved the check for !irqs_disabled() before the
spurious enable test, resulting in some warnings.

Reported-by: Arnaud Lacombe <lacombar@gmail.com>
Reported-by: Dave Jones <davej@redhat.com>
Reported-and-tested-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1311679697.24752.28.camel@twins
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-08-04 10:17:36 +02:00
Linus Torvalds
288d5abec8 Boot up with usermodehelper disabled
The core device layer sends tons of uevent notifications for each device
it finds, and if the kernel has been built with a non-empty
CONFIG_UEVENT_HELPER_PATH that will make us try to execute the usermode
helper binary for all these events very early in the boot.

Not only won't the root filesystem even be mounted at that point, we
literally won't have necessarily even initialized all the process
handling data structures at that point, which causes no end of silly
problems even when the usermode helper doesn't actually succeed in
executing.

So just use our existing infrastructure to disable the usermodehelpers
to make the kernel start out with them disabled.  We enable them when
we've at least initialized stuff a bit.

Problems related to an uninitialized

	init_ipc_ns.ids[IPC_SHM_IDS].rw_mutex

reported by various people.

Reported-by: Manuel Lauss <manuel.lauss@googlemail.com>
Reported-by: Richard Weinberger <richard@nod.at>
Reported-by: Marc Zyngier <maz@misterjones.org>
Acked-by: Kay Sievers <kay.sievers@vrfy.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Vasiliy Kulikov <segoon@openwall.com>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-08-03 22:03:29 -10:00
Ingo Molnar
d7619fe39d Merge branch 'linus' into core/urgent 2011-08-04 09:09:27 +02:00
Oleg Nesterov
a7295898a1 taskstats: add_del_listener() should ignore !valid listeners
When send_cpu_listeners() finds the orphaned listener it marks it as
!valid and drops listeners->sem.  Before it takes this sem for writing,
s->pid can be reused and add_del_listener() can wrongly try to re-use
this entry.

Change add_del_listener() to check ->valid = T.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Vasiliy Kulikov <segoon@openwall.com>
Acked-by: Balbir Singh <bsingharora@gmail.com>
Cc: Jerome Marchand <jmarchan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-08-03 14:25:20 -10:00
Oleg Nesterov
dfc428b656 taskstats: add_del_listener() shouldn't use the wrong node
1. Commit 26c4caea9d "don't allow duplicate entries in listener mode"
   changed add_del_listener(REGISTER) so that "next_cpu:" can reuse the
   listener allocated for the previous cpu, this doesn't look exactly
   right even if minor.

   Change the code to kfree() in the already-registered case, this case
   is unlikely anyway so the extra kmalloc_node() shouldn't hurt but
   looke more correct and clean.

2. use the plain list_for_each_entry() instead of _safe() to scan
   listeners->list.

3. Remove the unneeded INIT_LIST_HEAD(&s->list), we are going to
   list_add(&s->list).

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Vasiliy Kulikov <segoon@openwall.com>
Cc: Balbir Singh <bsingharora@gmail.com>
Reviewed-by: Jerome Marchand <jmarchan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-08-03 14:25:20 -10:00
Linus Torvalds
72f9adfd20 Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb:
  kdb,kgdb: Allow arbitrary kgdb magic knock sequences
  kdb: Remove all references to DOING_KGDB2
  kdb,kgdb: Implement switch and pass buffer from kdb -> gdb
  kdb: cleanup unused variables missed in the original kdb merge
2011-08-01 13:39:40 -10:00
Jason Wessel
37f86b469d kdb,kgdb: Allow arbitrary kgdb magic knock sequences
The first packet that gdb sends when the kernel is in kdb mode seems
to change with every release of gdb.  Instead of continuing to add
many different gdb packets, change kdb to automatically look for any
thing that looks like a gdb packet.

Example 1 cold start test:
echo g > /proc/sysrq-trigger
$D#44+

Example 2 cold start test:
echo g > /proc/sysrq-trigger
$3#33

The second one should re-enter kdb's shell right away and is purely a
test.

Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2011-08-01 13:23:59 -05:00
Jason Wessel
d613d828e8 kdb: Remove all references to DOING_KGDB2
The DOING_KGDB2 was originally a state variable for one of the two
ways to automatically transition from kdb to kgdb.  Purge all these
variables and just use one single state for the transition.

Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2011-08-01 13:23:59 -05:00
Jason Wessel
f679c4985b kdb,kgdb: Implement switch and pass buffer from kdb -> gdb
When switching from kdb mode to kgdb mode packets were getting lost
depending on the size of the fifo queue of the serial chip.  When gdb
initially connects if it is in kdb mode it should entirely send any
character buffer over to the gdbstub when switching connections.

Previously kdb was zero'ing out the character buffer and this could
lead to gdb failing to connect at all, or a lengthy pause could occur
on the initial connect.

Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2011-08-01 13:23:59 -05:00
Jason Wessel
3bdb65ec95 kdb: cleanup unused variables missed in the original kdb merge
The BTARGS and BTSYMARG variables do not have any function in the
mainline version of kdb.

Reported-by: Tim Bird <tim.bird@am.sony.com>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2011-08-01 13:23:58 -05:00
Linus Torvalds
968e75fc13 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
  m68k/math-emu: Remove unnecessary code
  m68k/math-emu: Remove commented out old code
  m68k: Kill warning in setup_arch() when compiling for Sun3
  m68k/atari: Prefix GPIO_{IN,OUT} with CODEC_
  sparc: iounmap() and *_free_coherent() - Use lookup_resource()
  m68k/atari: Reserve some ST-RAM early on for device buffer use
  m68k/amiga: Chip RAM - Use lookup_resource()
  resources: Add lookup_resource()
  sparc: _sparc_find_resource() should check for exact matches
  m68k/amiga: Chip RAM - Offset resource end by CHIP_PHYSADDR
  m68k/amiga: Chip RAM - Use resource_size() to fix off-by-one error
  m68k/amiga: Chip RAM - Change chipavail to an atomic_t
  m68k/amiga: Chip RAM - Always allocate from the start of memory
  m68k/amiga: Chip RAM - Convert from printk() to pr_*()
  m68k/amiga: Chip RAM - Use tabs for indentation
2011-07-31 14:30:59 -10:00
Geert Uytterhoeven
1c388919d8 resources: Add lookup_resource()
Add a function to find an existing resource by a resource start address.
This allows to implement simple allocators (with a malloc/free-alike API)
on top of the resource system.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-07-30 21:21:39 +02:00
Linus Torvalds
664a41b8a9 Merge branch 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6
* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (430 commits)
  [media] ir-mce_kbd-decoder: include module.h for its facilities
  [media] ov5642: include module.h for its facilities
  [media] em28xx: Fix DVB-C maxsize for em2884
  [media] tda18271c2dd: Fix saw filter configuration for DVB-C @6MHz
  [media] v4l: mt9v032: Fix Bayer pattern
  [media] V4L: mt9m111: rewrite set_pixfmt
  [media] V4L: mt9m111: fix missing return value check mt9m111_reg_clear
  [media] V4L: initial driver for ov5642 CMOS sensor
  [media] V4L: sh_mobile_ceu_camera: fix Oops when USERPTR mapping fails
  [media] V4L: soc-camera: remove soc-camera bus and devices on it
  [media] V4L: soc-camera: un-export the soc-camera bus
  [media] V4L: sh_mobile_csi2: switch away from using the soc-camera bus notifier
  [media] V4L: add media bus configuration subdev operations
  [media] V4L: soc-camera: group struct field initialisations together
  [media] V4L: soc-camera: remove now unused soc-camera specific PM hooks
  [media] V4L: pxa-camera: switch to using standard PM hooks
  [media] NetUP Dual DVB-T/C CI RF: force card hardware revision by module param
  [media] Don't OOPS if videobuf_dvb_get_frontend return NULL
  [media] NetUP Dual DVB-T/C CI RF: load firmware according card revision
  [media] omap3isp: Support configurable HS/VS polarities
  ...

Fix up conflicts:
 - arch/arm/mach-omap2/board-rx51-peripherals.c:
     cleanup regulator supply definitions in mach-omap2
   vs
     OMAP3: RX-51: define vdds_csib regulator supply
 - drivers/staging/tm6000/tm6000-alsa.c (trivial)
2011-07-30 00:08:53 -07:00
Linus Torvalds
cb7dee8d22 Merge branch 'next/dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc
* 'next/dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc: (21 commits)
  arm/dt: tegra devicetree support
  arm/versatile: Add device tree support
  dt/irq: add irq_domain_generate_simple() helper
  irq: add irq_domain translation infrastructure
  dmaengine: imx-sdma: add device tree probe support
  dmaengine: imx-sdma: sdma_get_firmware does not need to copy fw_name
  dmaengine: imx-sdma: use platform_device_id to identify sdma version
  mmc: sdhci-esdhc-imx: add device tree probe support
  mmc: sdhci-pltfm: dt device does not pass parent to sdhci_alloc_host
  mmc: sdhci-esdhc-imx: get rid of the uses of cpu_is_mx()
  mmc: sdhci-esdhc-imx: do not reference platform data after probe
  mmc: sdhci-esdhc-imx: extend card_detect and write_protect support for mx5
  net/fec: add device tree probe support
  net: ibm_newemac: convert it to use of_get_phy_mode
  dt/net: add helper function of_get_phy_mode
  net/fec: gasket needs to be enabled for some i.mx
  serial/imx: add device tree probe support
  serial/imx: get rid of the uses of cpu_is_mx1()
  arm/dt: Add dtb make rule
  arm/dt: Add skeleton dtsi file
  ...
2011-07-29 23:32:02 -07:00
Arnd Bergmann
6124a4e430 Merge branch 'imx/dt' into next/dt 2011-07-28 15:25:46 +00:00
Grant Likely
7e71330169 dt/irq: add irq_domain_generate_simple() helper
irq_domain_generate_simple() is an easy way to generate an irq translation
domain for simple irq controllers.  It assumes a flat 1:1 mapping from
hardware irq number to an offset of the first linux irq number assigned
to the controller

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-07-28 01:32:04 -06:00
Grant Likely
08a543ad33 irq: add irq_domain translation infrastructure
This patch adds irq_domain infrastructure for translating from
hardware irq numbers to linux irqs.  This is particularly important
for architectures adding device tree support because the current
implementation (excluding PowerPC and SPARC) cannot handle
translation for more than a single interrupt controller.  irq_domain
supports device tree translation for any number of interrupt
controllers.

This patch converts x86, Microblaze, ARM and MIPS to use irq_domain
for device tree irq translation.  x86 is untested beyond compiling it,
irq_domain is enabled for MIPS and Microblaze, but the old behaviour is
preserved until the core code is modified to actually register an
irq_domain yet.  On ARM it works and is required for much of the new
ARM device tree board support.

PowerPC has /not/ been converted to use this new infrastructure.  It
is still missing some features before it can replace the virq
infrastructure already in powerpc (see documentation on
irq_domain_map/unmap for details).  Followup patches will add the
missing pieces and migrate PowerPC to use irq_domain.

SPARC has its own method of managing interrupts from the device tree
and is unaffected by this change.

Acked-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-07-28 01:32:04 -06:00
Linus Torvalds
95b6886526 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6: (54 commits)
  tpm_nsc: Fix bug when loading multiple TPM drivers
  tpm: Move tpm_tis_reenable_interrupts out of CONFIG_PNP block
  tpm: Fix compilation warning when CONFIG_PNP is not defined
  TOMOYO: Update kernel-doc.
  tpm: Fix a typo
  tpm_tis: Probing function for Intel iTPM bug
  tpm_tis: Fix the probing for interrupts
  tpm_tis: Delay ACPI S3 suspend while the TPM is busy
  tpm_tis: Re-enable interrupts upon (S3) resume
  tpm: Fix display of data in pubek sysfs entry
  tpm_tis: Add timeouts sysfs entry
  tpm: Adjust interface timeouts if they are too small
  tpm: Use interface timeouts returned from the TPM
  tpm_tis: Introduce durations sysfs entry
  tpm: Adjust the durations if they are too small
  tpm: Use durations returned from TPM
  TOMOYO: Enable conditional ACL.
  TOMOYO: Allow using argv[]/envp[] of execve() as conditions.
  TOMOYO: Allow using executable's realpath and symlink's target as conditions.
  TOMOYO: Allow using owner/group etc. of file objects as conditions.
  ...

Fix up trivial conflict in security/tomoyo/realpath.c
2011-07-27 19:26:38 -07:00
Hans Verkuil
2330fb8242 [media] v4l2-compat-ioctl32: add VIDIOC_DQEVENT support
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-27 17:53:20 -03:00
Oleg Nesterov
c1095c6da5 signals: sys_ssetmask/sys_rt_sigsuspend should use set_current_blocked()
sys_ssetmask(), sys_rt_sigsuspend() and compat_sys_rt_sigsuspend()
change ->blocked directly.  This is not correct, see the changelog in
e6fa16ab "signal: sigprocmask() should do retarget_shared_pending()"

Change them to use set_current_blocked().

Another change is that now we are doing ->saved_sigmask = ->blocked
lockless, it doesn't make any sense to do this under ->siglock.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Matt Fleming <matt.fleming@linux.intel.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-27 12:53:36 -07:00
Arun Sharma
60063497a9 atomic: use <linux/atomic.h>
This allows us to move duplicated code in <asm/atomic.h>
(atomic_inc_not_zero() for now) to <linux/atomic.h>

Signed-off-by: Arun Sharma <asharma@fb.com>
Reviewed-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: David Miller <davem@davemloft.net>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-26 16:49:47 -07:00
Hugh Dickins
4302fbc8ec panic: panic=-1 for immediate reboot
When a kernel BUG or oops occurs, ChromeOS intends to panic and
immediately reboot, with stacktrace and other messages preserved in RAM
across reboot.

But the longer we delay, the more likely the user is to poweroff and
lose the info.

panic_timeout (seconds before rebooting) is set by panic= boot option or
sysctl or /proc/sys/kernel/panic; but 0 means wait forever, so at
present we have to delay at least 1 second.

Let a negative number mean reboot immediately (with the small cosmetic
benefit of suppressing that newline-less "Rebooting in %d seconds.."
message).

Signed-off-by: Hugh Dickins <hughd@chromium.org>
Signed-off-by: Mandeep Singh Baines <msb@chromium.org>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Olaf Hering <olaf@aepfle.de>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Dave Airlie <airlied@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-26 16:49:45 -07:00
Vitaliy Ivanov
947be5dfda gcov: disable CONSTRUCTORS for UML
Selecting GCOV for UML causing configuration mismatch:

  warning: (GCOV_KERNEL) selects CONSTRUCTORS which has unmet direct dependencies (!UML)

Constructors are not needed for UML.

Signed-off-by: Vitaliy Ivanov <vitalivanov@gmail.com>
Cc: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Acked-by: Richard Weinberger <richard@nod.at>
Acked-by: WANG Cong <xiyou.wangcong@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-26 16:49:45 -07:00
Vasiliy Kulikov
b34a6b1da3 ipc: introduce shm_rmid_forced sysctl
Add support for the shm_rmid_forced sysctl.  If set to 1, all shared
memory objects in current ipc namespace will be automatically forced to
use IPC_RMID.

The POSIX way of handling shmem allows one to create shm objects and
call shmdt(), leaving shm object associated with no process, thus
consuming memory not counted via rlimits.

With shm_rmid_forced=1 the shared memory object is counted at least for
one process, so OOM killer may effectively kill the fat process holding
the shared memory.

It obviously breaks POSIX - some programs relying on the feature would
stop working.  So set shm_rmid_forced=1 only if you're sure nobody uses
"orphaned" memory.  Use shm_rmid_forced=0 by default for compatability
reasons.

The feature was previously impemented in -ow as a configure option.

[akpm@linux-foundation.org: fix documentation, per Randy]
[akpm@linux-foundation.org: fix warning]
[akpm@linux-foundation.org: readability/conventionality tweaks]
[akpm@linux-foundation.org: fix shm_rmid_forced/shm_forced_rmid confusion, use standard comment layout]
Signed-off-by: Vasiliy Kulikov <segoon@openwall.com>
Cc: Randy Dunlap <rdunlap@xenotime.net>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: "Serge E. Hallyn" <serge.hallyn@canonical.com>
Cc: Daniel Lezcano <daniel.lezcano@free.fr>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Solar Designer <solar@openwall.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-26 16:49:44 -07:00
Daniel Rebelo de Oliveira
fb0a685cb9 kernel/fork.c: fix a few coding style issues
Signed-off-by: Daniel Rebelo de Oliveira <psykon@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-26 16:49:44 -07:00
Michal Hocko
778d3b0ff0 cpusets: randomize node rotor used in cpuset_mem_spread_node()
[ This patch has already been accepted as commit 0ac0c0d0f8 but later
  reverted (commit 35926ff5fb) because it itroduced arch specific
  __node_random which was defined only for x86 code so it broke other
  archs.  This is a followup without any arch specific code.  Other than
  that there are no functional changes.]

Some workloads that create a large number of small files tend to assign
too many pages to node 0 (multi-node systems).  Part of the reason is
that the rotor (in cpuset_mem_spread_node()) used to assign nodes starts
at node 0 for newly created tasks.

This patch changes the rotor to be initialized to a random node number
of the cpuset.

[akpm@linux-foundation.org: fix layout]
[Lee.Schermerhorn@hp.com: Define stub numa_random() for !NUMA configuration]
[mhocko@suse.cz: Make it arch independent]
[akpm@linux-foundation.org: fix CONFIG_NUMA=y, MAX_NUMNODES>1 build]
Signed-off-by: Jack Steiner <steiner@sgi.com>
Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com>
Signed-off-by: Michal Hocko <mhocko@suse.cz>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Paul Menage <menage@google.com>
Cc: Jack Steiner <steiner@sgi.com>
Cc: Robin Holt <holt@sgi.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Jack Steiner <steiner@sgi.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Paul Menage <menage@google.com>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Robin Holt <holt@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-26 16:49:43 -07:00
Shawn Bohrer
9ea71503a8 futex: Fix regression with read only mappings
commit 7485d0d375 (futexes: Remove rw
parameter from get_futex_key()) in 2.6.33 fixed two problems:  First, It
prevented a loop when encountering a ZERO_PAGE. Second, it fixed RW
MAP_PRIVATE futex operations by forcing the COW to occur by
unconditionally performing a write access get_user_pages_fast() to get
the page.  The commit also introduced a user-mode regression in that it
broke futex operations on read-only memory maps.  For example, this
breaks workloads that have one or more reader processes doing a
FUTEX_WAIT on a futex within a read only shared file mapping, and a
writer processes that has a writable mapping issuing the FUTEX_WAKE.

This fixes the regression for valid futex operations on RO mappings by
trying a RO get_user_pages_fast() when the RW get_user_pages_fast()
fails. This change makes it necessary to also check for invalid use
cases, such as anonymous RO mappings (which can never change) and the
ZERO_PAGE which the commit referenced above was written to address.

This patch does restore the original behavior with RO MAP_PRIVATE
mappings, which have inherent user-mode usage problems and don't really
make sense.  With this patch performing a FUTEX_WAIT within a RO
MAP_PRIVATE mapping will be successfully woken provided another process
updates the region of the underlying mapped file.  However, the mmap()
man page states that for a MAP_PRIVATE mapping:

  It is unspecified whether changes made to the file after
  the mmap() call are visible in the mapped region.

So user-mode users attempting to use futex operations on RO MAP_PRIVATE
mappings are depending on unspecified behavior.  Additionally a
RO MAP_PRIVATE mapping could fail to wake up in the following case.

  Thread-A: call futex(FUTEX_WAIT, memory-region-A).
            get_futex_key() return inode based key.
            sleep on the key
  Thread-B: call mprotect(PROT_READ|PROT_WRITE, memory-region-A)
  Thread-B: write memory-region-A.
            COW happen. This process's memory-region-A become related
            to new COWed private (ie PageAnon=1) page.
  Thread-B: call futex(FUETX_WAKE, memory-region-A).
            get_futex_key() return mm based key.
            IOW, we fail to wake up Thread-A.

Once again doing something like this is just silly and users who do
something like this get what they deserve.

While RO MAP_PRIVATE mappings are nonsensical, checking for a private
mapping requires walking the vmas and was deemed too costly to avoid a
userspace hang.

This Patch is based on Peter Zijlstra's initial patch with modifications to
only allow RO mappings for futex operations that need VERIFY_READ access.

Reported-by: David Oliver <david@rgmadvisors.com>
Signed-off-by: Shawn Bohrer <sbohrer@rgmadvisors.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: peterz@infradead.org
Cc: eric.dumazet@gmail.com
Cc: zvonler@rgmadvisors.com
Cc: hughd@google.com
Link: http://lkml.kernel.org/r/1309450892-30676-1-git-send-email-sbohrer@rgmadvisors.com
Cc: stable@kernel.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-07-26 20:59:35 +02:00
Linus Torvalds
45b583b10a Merge 'akpm' patch series
* Merge akpm patch series: (122 commits)
  drivers/connector/cn_proc.c: remove unused local
  Documentation/SubmitChecklist: add RCU debug config options
  reiserfs: use hweight_long()
  reiserfs: use proper little-endian bitops
  pnpacpi: register disabled resources
  drivers/rtc/rtc-tegra.c: properly initialize spinlock
  drivers/rtc/rtc-twl.c: check return value of twl_rtc_write_u8() in twl_rtc_set_time()
  drivers/rtc: add support for Qualcomm PMIC8xxx RTC
  drivers/rtc/rtc-s3c.c: support clock gating
  drivers/rtc/rtc-mpc5121.c: add support for RTC on MPC5200
  init: skip calibration delay if previously done
  misc/eeprom: add eeprom access driver for digsy_mtc board
  misc/eeprom: add driver for microwire 93xx46 EEPROMs
  checkpatch.pl: update $logFunctions
  checkpatch: make utf-8 test --strict
  checkpatch.pl: add ability to ignore various messages
  checkpatch: add a "prefer __aligned" check
  checkpatch: validate signature styles and To: and Cc: lines
  checkpatch: add __rcu as a sparse modifier
  checkpatch: suggest using min_t or max_t
  ...

Did this as a merge because of (trivial) conflicts in
 - Documentation/feature-removal-schedule.txt
 - arch/xtensa/include/asm/uaccess.h
that were just easier to fix up in the merge than in the patch series.
2011-07-25 21:00:19 -07:00
Stephen Boyd
626a031251 kernel/configs.c: include MODULE_*() when CONFIG_IKCONFIG_PROC=n
If CONFIG_IKCONFIG=m but CONFIG_IKCONFIG_PROC=n we get a module that has
no MODULE_LICENSE definition.  Move the MODULE_*() definitions outside the
CONFIG_IKCONFIG_PROC #ifdef to prevent this configuration from tainting
the kernel.

Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Acked-by: Randy Dunlap <rdunlap@xenotime.net>
Acked-by: WANG Cong <xiyou.wangcong@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-25 20:57:15 -07:00
Amerigo Wang
c5f41752fd notifiers: sys: move reboot notifiers into reboot.h
It is not necessary to share the same notifier.h.

This patch already moves register_reboot_notifier() and
unregister_reboot_notifier() from kernel/notifier.c to kernel/sys.c.

[amwang@redhat.com: make allyesconfig succeed on ppc64]
Signed-off-by: WANG Cong <amwang@redhat.com>
Cc: David Miller <davem@davemloft.net>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: WANG Cong <amwang@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-25 20:57:14 -07:00
Maxin B John
ae891a1b93 devres: fix possible use after free
devres uses the pointer value as key after it's freed, which is safe but
triggers spurious use-after-free warnings on some static analysis tools.
Rearrange code to avoid such warnings.

Signed-off-by: Maxin B. John <maxin.john@gmail.com>
Reviewed-by: Rolf Eike Beer <eike-kernel@sf-tec.de>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-25 20:57:14 -07:00
Benjamin Herrenschmidt
2efaca927f mm/futex: fix futex writes on archs with SW tracking of dirty & young
I haven't reproduced it myself but the fail scenario is that on such
machines (notably ARM and some embedded powerpc), if you manage to hit
that futex path on a writable page whose dirty bit has gone from the PTE,
you'll livelock inside the kernel from what I can tell.

It will go in a loop of trying the atomic access, failing, trying gup to
"fix it up", getting succcess from gup, go back to the atomic access,
failing again because dirty wasn't fixed etc...

So I think you essentially hang in the kernel.

The scenario is probably rare'ish because affected architecture are
embedded and tend to not swap much (if at all) so we probably rarely hit
the case where dirty is missing or young is missing, but I think Shan has
a piece of SW that can reliably reproduce it using a shared writable
mapping & fork or something like that.

On archs who use SW tracking of dirty & young, a page without dirty is
effectively mapped read-only and a page without young unaccessible in the
PTE.

Additionally, some architectures might lazily flush the TLB when relaxing
write protection (by doing only a local flush), and expect a fault to
invalidate the stale entry if it's still present on another processor.

The futex code assumes that if the "in_atomic()" access -EFAULT's, it can
"fix it up" by causing get_user_pages() which would then be equivalent to
taking the fault.

However that isn't the case.  get_user_pages() will not call
handle_mm_fault() in the case where the PTE seems to have the right
permissions, regardless of the dirty and young state.  It will eventually
update those bits ...  in the struct page, but not in the PTE.

Additionally, it will not handle the lazy TLB flushing that can be
required by some architectures in the fault case.

Basically, gup is the wrong interface for the job.  The patch provides a
more appropriate one which boils down to just calling handle_mm_fault()
since what we are trying to do is simulate a real page fault.

The futex code currently attempts to write to user memory within a
pagefault disabled section, and if that fails, tries to fix it up using
get_user_pages().

This doesn't work on archs where the dirty and young bits are maintained
by software, since they will gate access permission in the TLB, and will
not be updated by gup().

In addition, there's an expectation on some archs that a spurious write
fault triggers a local TLB flush, and that is missing from the picture as
well.

I decided that adding those "features" to gup() would be too much for this
already too complex function, and instead added a new simpler
fixup_user_fault() which is essentially a wrapper around handle_mm_fault()
which the futex code can call.

[akpm@linux-foundation.org: coding-style fixes]
[akpm@linux-foundation.org: fix some nits Darren saw, fiddle comment layout]
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Reported-by: Shan Hai <haishan.bai@gmail.com>
Tested-by: Shan Hai <haishan.bai@gmail.com>
Cc: David Laight <David.Laight@ACULAB.COM>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Darren Hart <darren.hart@intel.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-25 20:57:11 -07:00
Linus Torvalds
154dd78d30 Merge branches 'kbuild', 'packaging' and 'misc' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6
* 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6:
  genksyms: Use same type in loop comparison
  kbuild: silence generated makefile message
  kernel: prevent unnecessary rebuilding due to config_data.gz
  headers_install: fix __packed in exported kernel headers
  dtc: regen parser
  dtc: migrate parser to implicit rules
  kconfig: regen parser
  kconfig: migrate parser to implicit rules
  kconfig/zconf.l: do not ask to generate backup
  kconfig: kill no longer needed reference to YYDEBUG
  kconfig: constify `kconf_id_lookup'
  genksym: regen parser
  genksyms: migrate parser to implicit rules
  genksyms: drop -Wno-uninitialized from HOSTCFLAGS_parse.tab.o
  genksyms: pass hash and lookup functions name and target language though the input file
  kbuild: simplify the %_shipped rule
  kbuild: add implicit rules for parser generation
  kbuild: add `baseprereq'
  kbuild: Fix reference to vermagic.h

* 'packaging' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6:
  package: Makefile: fix perf target bug

* 'misc' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6:
  gitignore: ignore debian build directory
2011-07-25 20:01:57 -07:00
Linus Torvalds
d3ec4844d4 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (43 commits)
  fs: Merge split strings
  treewide: fix potentially dangerous trailing ';' in #defined values/expressions
  uwb: Fix misspelling of neighbourhood in comment
  net, netfilter: Remove redundant goto in ebt_ulog_packet
  trivial: don't touch files that are removed in the staging tree
  lib/vsprintf: replace link to Draft by final RFC number
  doc: Kconfig: `to be' -> `be'
  doc: Kconfig: Typo: square -> squared
  doc: Konfig: Documentation/power/{pm => apm-acpi}.txt
  drivers/net: static should be at beginning of declaration
  drivers/media: static should be at beginning of declaration
  drivers/i2c: static should be at beginning of declaration
  XTENSA: static should be at beginning of declaration
  SH: static should be at beginning of declaration
  MIPS: static should be at beginning of declaration
  ARM: static should be at beginning of declaration
  rcu: treewide: Do not use rcu_read_lock_held when calling rcu_dereference_check
  Update my e-mail address
  PCIe ASPM: forcedly -> forcibly
  gma500: push through device driver tree
  ...

Fix up trivial conflicts:
 - arch/arm/mach-ep93xx/dma-m2p.c (deleted)
 - drivers/gpio/gpio-ep93xx.c (renamed and context nearby)
 - drivers/net/r8169.c (just context changes)
2011-07-25 13:56:39 -07:00
Linus Torvalds
096a705bbc Merge branch 'for-3.1/core' of git://git.kernel.dk/linux-block
* 'for-3.1/core' of git://git.kernel.dk/linux-block: (24 commits)
  block: strict rq_affinity
  backing-dev: use synchronize_rcu_expedited instead of synchronize_rcu
  block: fix patch import error in max_discard_sectors check
  block: reorder request_queue to remove 64 bit alignment padding
  CFQ: add think time check for group
  CFQ: add think time check for service tree
  CFQ: move think time check variables to a separate struct
  fixlet: Remove fs_excl from struct task.
  cfq: Remove special treatment for metadata rqs.
  block: document blk_plug list access
  block: avoid building too big plug list
  compat_ioctl: fix make headers_check regression
  block: eliminate potential for infinite loop in blkdev_issue_discard
  compat_ioctl: fix warning caused by qemu
  block: flush MEDIA_CHANGE from drivers on close(2)
  blk-throttle: Make total_nr_queued unsigned
  block: Add __attribute__((format(printf...) and fix fallout
  fs/partitions/check.c: make local symbols static
  block:remove some spare spaces in genhd.c
  block:fix the comment error in blkdev.h
  ...
2011-07-25 10:33:36 -07:00
Jesper Juhl
f629299b54 trace events: Update version number reference to new 3.x scheme for EVENT_POWER_TRACING_DEPRECATED
What was scheduled to be 2.6.41 is now going to be 3.1 .

Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/alpine.LNX.2.00.1107250929370.8080@swampdragon.chaosbits.net
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-07-25 09:37:21 +02:00
Linus Torvalds
fcda12e7f6 Merge git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus
* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus:
  modpost: Fix modpost's license checking V3
  module: add /sys/module/<name>/uevent files
  module: change attr callbacks to take struct module_kobject
  modules: make arch's use default loader hooks
  modules: add default loader hook implementations
  param: fix return value handling in param_set_*
2011-07-24 09:54:54 -07:00
Linus Torvalds
5fabc487c9 Merge branch 'kvm-updates/3.1' of git://git.kernel.org/pub/scm/virt/kvm/kvm
* 'kvm-updates/3.1' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (143 commits)
  KVM: IOMMU: Disable device assignment without interrupt remapping
  KVM: MMU: trace mmio page fault
  KVM: MMU: mmio page fault support
  KVM: MMU: reorganize struct kvm_shadow_walk_iterator
  KVM: MMU: lockless walking shadow page table
  KVM: MMU: do not need atomicly to set/clear spte
  KVM: MMU: introduce the rules to modify shadow page table
  KVM: MMU: abstract some functions to handle fault pfn
  KVM: MMU: filter out the mmio pfn from the fault pfn
  KVM: MMU: remove bypass_guest_pf
  KVM: MMU: split kvm_mmu_free_page
  KVM: MMU: count used shadow pages on prepareing path
  KVM: MMU: rename 'pt_write' to 'emulate'
  KVM: MMU: cleanup for FNAME(fetch)
  KVM: MMU: optimize to handle dirty bit
  KVM: MMU: cache mmio info on page fault path
  KVM: x86: introduce vcpu_mmio_gva_to_gpa to cleanup the code
  KVM: MMU: do not update slot bitmap if spte is nonpresent
  KVM: MMU: fix walking shadow page table
  KVM guest: KVM Steal time registration
  ...
2011-07-24 09:07:03 -07:00