This patch fixes a bug in precise_store_data_hsw() whereby
it would set the data source memory level to the wrong value.
As per the the SDM Vol 3b Table 18-41 (Layout of Data Linear
Address Information in PEBS Record), when status bit 0 is set
this is a L1 hit, otherwise this is a L1 miss.
This patch encodes the memory level according to the specification.
In V2, we added the filtering on the store events.
Only the following events produce L1 information:
* MEM_UOPS_RETIRED.STLB_MISS_STORES
* MEM_UOPS_RETIRED.LOCK_STORES
* MEM_UOPS_RETIRED.SPLIT_STORES
* MEM_UOPS_RETIRED.ALL_STORES
Cc: mingo@elte.hu
Cc: acme@ghostprotocols.net
Cc: jolsa@redhat.com
Cc: jmario@redhat.com
Cc: ak@linux.intel.com
Tested-and-Reviewed-by: Don Zickus <dzickus@redhat.com>
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20140515155644.GA3884@quad
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Pull irq fixes from Thomas Gleixner:
"This udpate delivers:
- A fix for dynamic interrupt allocation on x86 which is required to
exclude the GSI interrupts from the dynamic allocatable range.
This was detected with the newfangled tablet SoCs which have GPIOs
and therefor allocate a range of interrupts. The MSI allocations
already excluded the GSI range, so we never noticed before.
- The last missing set_irq_affinity() repair, which was delayed due
to testing issues
- A few bug fixes for the armada SoC interrupt controller
- A memory allocation fix for the TI crossbar interrupt controller
- A trivial kernel-doc warning fix"
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip: irq-crossbar: Not allocating enough memory
irqchip: armanda: Sanitize set_irq_affinity()
genirq: x86: Ensure that dynamic irq allocation does not conflict
linux/interrupt.h: fix new kernel-doc warnings
irqchip: armada-370-xp: Fix releasing of MSIs
irqchip: armada-370-xp: implement the ->check_device() msi_chip operation
irqchip: armada-370-xp: fix invalid cast of signed value into unsigned variable
Pull x86 fixes from Peter Anvin:
"Two very small changes: one fix for the vSMP Foundation platform, and
one to help LLVM not choke on options it doesn't understand (although
it probably should)"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/vsmp: Fix irq routing
x86: LLVMLinux: Wrap -mno-80387 with cc-option
Pull KVM fixes from Paolo Bonzini:
- Fix for a Haswell regression in nested virtualization, introduced
during the merge window.
- A fix from Oleg to async page faults.
- A bunch of small ARM changes.
- A trivial patch to use the new MSI-X API introduced during the merge
window.
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: ARM: vgic: Fix the overlap check action about setting the GICD & GICC base address.
KVM: arm/arm64: vgic: fix GICD_ICFGR register accesses
KVM: async_pf: mm->mm_users can not pin apf->mm
KVM: ARM: vgic: Fix sgi dispatch problem
MAINTAINERS: co-maintainance of KVM/{arm,arm64}
arm: KVM: fix possible misalignment of PGDs and bounce page
KVM: x86: Check for host supported fields in shadow vmcs
kvm: Use pci_enable_msix_exact() instead of pci_enable_msix()
ARM: KVM: disable KVM in Kconfig on big-endian systems
On x86 the allocation of irq descriptors may allocate interrupts which
are in the range of the GSI interrupts. That's wrong as those
interrupts are hardwired and we don't have the irq domain translation
like PPC. So one of these interrupts can be hooked up later to one of
the devices which are hard wired to it and the io_apic init code for
that particular interrupt line happily reuses that descriptor with a
completely different configuration so hell breaks lose.
Inside x86 we allocate dynamic interrupts from above nr_gsi_irqs,
except for a few usage sites which have not yet blown up in our face
for whatever reason. But for drivers which need an irq range, like the
GPIO drivers, we have no limit in place and we don't want to expose
such a detail to a driver.
To cure this introduce a function which an architecture can implement
to impose a lower bound on the dynamic interrupt allocations.
Implement it for x86 and set the lower bound to nr_gsi_irqs, which is
the end of the hardwired interrupt space, so all dynamic allocations
happen above.
That not only allows the GPIO driver to work sanely, it also protects
the bogus callsites of create_irq_nr() in hpet, uv, irq_remapping and
htirq code. They need to be cleaned up as well, but that's a separate
issue.
Reported-by: Jin Yao <yao.jin@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: Mathias Nyman <mathias.nyman@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Grant Likely <grant.likely@linaro.org>
Cc: H. Peter Anvin <hpa@linux.intel.com>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Krogerus Heikki <heikki.krogerus@intel.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Link: http://lkml.kernel.org/r/alpine.DEB.2.02.1404241617360.28206@ionos.tec.linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
We track shadow vmcs fields through two static lists,
one for read only and another for r/w fields. However, with
addition of new vmcs fields, not all fields may be supported on
all hosts. If so, copy_vmcs12_to_shadow() trying to vmwrite on
unsupported hosts will result in a vmwrite error. For example, commit
36be0b9deb introduced GUEST_BNDCFGS, which is not supported
by all processors. Filter out host unsupported fields before
letting guests use shadow vmcs
Signed-off-by: Bandan Das <bsd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Correct IRQ routing in case a vSMP box is detected
but the Interrupt Routing Comply (IRC) value is set to
"comply", which leads to incorrect IRQ routing.
Before the patch:
When a vSMP box was detected and IRC was set to "comply",
users (and the kernel) couldn't effectively set the
destination of the IRQs. This is because the hook inside
vsmp_64.c always setup all CPUs as the IRQ destination using
cpumask_setall() as the return value for IRQ allocation mask.
Later, this "overrided" mask caused the kernel to set the IRQ
destination to the lowest online CPU in the mask (CPU0 usually).
After the patch:
When the IRC is set to "comply", users (and the kernel) can control
the destination of the IRQs as we will not be changing the
default "apic->vector_allocation_domain".
Signed-off-by: Oren Twaig <oren@scalemp.com>
Acked-by: Shai Fultheim <shai@scalemp.com>
Link: http://lkml.kernel.org/r/1398669697-2123-1-git-send-email-oren@scalemp.com
[ Minor readability edits. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull x86 vdso fix from Peter Anvin:
"This is a single build fix for building with gold as opposed to GNU
ld. It got queued up separately and was expected to be pushed during
the merge window, but it got left behind"
* 'x86-vdso-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86, vdso: Make the vdso linker script compatible with Gold
Pull x86 fix from Ingo Molnar:
"This fixes the preemption-count imbalance crash reported by Owen
Kibel"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mce: Fix CMCI preemption bugs
Change branch_setup_xol_ops() to simply use opc1 = OPCODE2(insn) - 0x10
if OPCODE1() == 0x0f; this matches the "short" jmp which checks the same
condition.
Thanks to lib/insn.c, it does the rest correctly. branch->ilen/offs are
correct no matter if this jmp is "near" or "short".
Reported-by: Jonathan Lebon <jlebon@redhat.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Jim Keniston <jkenisto@us.ibm.com>
Teach branch_emulate_op() to emulate the conditional "short" jmp's which
check regs->flags.
Note: this doesn't support jcxz/jcexz, loope/loopz, and loopne/loopnz.
They all are rel8 and thus they can't trigger the problem, but perhaps
we will add the support in future just for completeness.
Reported-by: Jonathan Lebon <jlebon@redhat.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Jim Keniston <jkenisto@us.ibm.com>
See the previous "Emulate unconditional relative jmp's" which explains
why we can not execute "jmp" out-of-line, the same applies to "call".
Emulating of rip-relative call is trivial, we only need to additionally
push the ret-address. If this fails, we execute this instruction out of
line and this should trigger the trap, the probed application should die
or the same insn will be restarted if a signal handler expands the stack.
We do not even need ->post_xol() for this case.
But there is a corner (and almost theoretical) case: another thread can
expand the stack right before we execute this insn out of line. In this
case it hit the same problem we are trying to solve. So we simply turn
the probed insn into "call 1f; 1:" and add ->post_xol() which restores
->sp and restarts.
Many thanks to Jonathan who finally found the standalone reproducer,
otherwise I would never resolve the "random SIGSEGV's under systemtap"
bug-report. Now that the problem is clear we can write the simplified
test-case:
void probe_func(void), callee(void);
int failed = 1;
asm (
".text\n"
".align 4096\n"
".globl probe_func\n"
"probe_func:\n"
"call callee\n"
"ret"
);
/*
* This assumes that:
*
* - &probe_func = 0x401000 + a_bit, aligned = 0x402000
*
* - xol_vma->vm_start = TASK_SIZE_MAX - PAGE_SIZE = 0x7fffffffe000
* as xol_add_vma() asks; the 1st slot = 0x7fffffffe080
*
* so we can target the non-canonical address from xol_vma using
* the simple math below, 100 * 4096 is just the random offset
*/
asm (".org . + 0x800000000000 - 0x7fffffffe080 - 5 - 1 + 100 * 4096\n");
void callee(void)
{
failed = 0;
}
int main(void)
{
probe_func();
return failed;
}
It SIGSEGV's if you probe "probe_func" (although this is not very reliable,
randomize_va_space/etc can change the placement of xol area).
Note: as Denys Vlasenko pointed out, amd and intel treat "callw" (0x66 0xe8)
differently. This patch relies on lib/insn.c and thus implements the intel's
behaviour: 0x66 is simply ignored. Fortunately nothing sane should ever use
this insn, so we postpone the fix until we decide what should we do; emulate
or not, support or not, etc.
Reported-by: Jonathan Lebon <jlebon@redhat.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Jim Keniston <jkenisto@us.ibm.com>
Finally we can kill the ugly (and very limited) code in __skip_sstep().
Just change branch_setup_xol_ops() to treat "nop" as jmp to the next insn.
Thanks to lib/insn.c, it is clever enough. OPCODE1() == 0x90 includes
"(rep;)+ nop;" at least, and (afaics) much more.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Jim Keniston <jkenisto@us.ibm.com>
Currently we always execute all insns out-of-line, including relative
jmp's and call's. This assumes that even if regs->ip points to nowhere
after the single-step, default_post_xol_op(UPROBE_FIX_IP) logic will
update it correctly.
However, this doesn't work if this regs->ip == xol_vaddr + insn_offset
is not canonical. In this case CPU generates #GP and general_protection()
kills the task which tries to execute this insn out-of-line.
Now that we have uprobe_xol_ops we can teach uprobes to emulate these
insns and solve the problem. This patch adds branch_xol_ops which has
a single branch_emulate_op() hook, so far it can only handle rel8/32
relative jmp's.
TODO: move ->fixup into the union along with rip_rela_target_address.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reported-by: Jonathan Lebon <jlebon@redhat.com>
Reviewed-by: Jim Keniston <jkenisto@us.ibm.com>
1. Add the trivial sizeof_long() helper and change other callers of
is_ia32_task() to use it.
TODO: is_ia32_task() is not what we actually want, TS_COMPAT does
not necessarily mean 32bit. Fortunately syscall-like insns can't be
probed so it actually works, but it would be better to rename and
use is_ia32_frame().
2. As Jim pointed out "ncopied" in arch_uretprobe_hijack_return_addr()
and adjust_ret_addr() should be named "nleft". And in fact only the
last copy_to_user() in arch_uretprobe_hijack_return_addr() actually
needs to inspect the non-zero error code.
TODO: adjust_ret_addr() should die. We can always calculate the value
we need to write into *regs->sp, just UPROBE_FIX_CALL should record
insn->length.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Jim Keniston <jkenisto@us.ibm.com>
SIGILL after the failed arch_uprobe_post_xol() should only be used as
a last resort, we should try to restart the probed insn if possible.
Currently only adjust_ret_addr() can fail, and this can only happen if
another thread unmapped our stack after we executed "call" out-of-line.
Most probably the application if buggy, but even in this case it can
have a handler for SIGSEGV/etc. And in theory it can be even correct
and do something non-trivial with its memory.
Of course we can't restart unconditionally, so arch_uprobe_post_xol()
does this only if ->post_xol() returns -ERESTART even if currently this
is the only possible error.
default_post_xol_op(UPROBE_FIX_CALL) can always restart, but as Jim
pointed out it should not forget to pop off the return address pushed
by this insn executed out-of-line.
Note: this is not "perfect", we do not want the extra handler_chain()
after restart, but I think this is the best solution we can realistically
do without too much uglifications.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Reviewed-by: Jim Keniston <jkenisto@us.ibm.com>
Currently the error from arch_uprobe_post_xol() is silently ignored.
This doesn't look good and this can lead to the hard-to-debug problems.
1. Change handle_singlestep() to loudly complain and send SIGILL.
Note: this only affects x86, ppc/arm can't fail.
2. Change arch_uprobe_post_xol() to call arch_uprobe_abort_xol() and
avoid TF games if it is going to return an error.
This can help to to analyze the problem, if nothing else we should
not report ->ip = xol_slot in the core-file.
Note: this means that handle_riprel_post_xol() can be called twice,
but this is fine because it is idempotent.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Reviewed-by: Jim Keniston <jkenisto@us.ibm.com>
arch_uprobe_analyze_insn() calls handle_riprel_insn() at the start,
but only "0xff" and "default" cases need the UPROBE_FIX_RIP_ logic.
Move the callsite into "default" case and change the "0xff" case to
fall-through.
We are going to add the various hooks to handle the rip-relative
jmp/call instructions (and more), we need this change to enforce the
fact that the new code can not conflict with is_riprel_insn() logic
which, after this change, can only be used by default_xol_ops.
Note: arch_uprobe_abort_xol() still calls handle_riprel_post_xol()
directly. This is fine unless another _xol_ops we may add later will
need to reuse "UPROBE_FIX_RIP_AX|UPROBE_FIX_RIP_CX" bits in ->fixup.
In this case we can add uprobe_xol_ops->abort() hook, which (perhaps)
we will need anyway in the long term.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Jim Keniston <jkenisto@us.ibm.com>
Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Introduce arch_uprobe->ops pointing to the "struct uprobe_xol_ops",
move the current UPROBE_FIX_{RIP*,IP,CALL} code into the default
set of methods and change arch_uprobe_pre/post_xol() accordingly.
This way we can add the new uprobe_xol_ops's to handle the insns
which need the special processing (rip-relative jmp/call at least).
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Jim Keniston <jkenisto@us.ibm.com>
Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
No functional changes. Preparation to simplify the review of the next
change. Just reorder the code in arch_uprobe_pre/post_xol() functions
so that UPROBE_FIX_{RIP_*,IP,CALL} logic goes to the end.
Also change arch_uprobe_pre_xol() to use utask instead of autask, to
make the code more symmetrical with arch_uprobe_post_xol().
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Reviewed-by: Jim Keniston <jkenisto@us.ibm.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cosmetic. Move pre_xol_rip_insn() and handle_riprel_post_xol() up to
the closely related handle_riprel_insn(). This way it is simpler to
read and understand this code, and this lessens the number of ifdef's.
While at it, update the comment in handle_riprel_post_xol() as Jim
suggested.
TODO: rename them somehow to make the naming consistent.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Reviewed-by: Jim Keniston <jkenisto@us.ibm.com>
Kill the "mm->context.ia32_compat" check in handle_riprel_insn(), if
it is true insn_rip_relative() must return false. validate_insn_bits()
passed "ia32_compat" as !x86_64 to insn_init(), and insn_rip_relative()
checks insn->x86_64.
Also, remove the no longer needed "struct mm_struct *mm" argument and
the unnecessary "return" at the end.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Reviewed-by: Jim Keniston <jkenisto@us.ibm.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
No functional changes, preparation.
Shift the code from prepare_fixups() to arch_uprobe_analyze_insn()
with the following modifications:
- Do not call insn_get_opcode() again, it was already called
by validate_insn_bits().
- Move "case 0xea" up. This way "case 0xff" can fall through
to default case.
- change "case 0xff" to use the nested "switch (MODRM_REG)",
this way the code looks a bit simpler.
- Make the comments look consistent.
While at it, kill the initialization of rip_rela_target_address and
->fixups, we can rely on kzalloc(). We will add the new members into
arch_uprobe, it would be better to assume that everything is zero by
default.
TODO: cleanup/fix the mess in validate_insn_bits() paths:
- validate_insn_64bits() and validate_insn_32bits() should be
unified.
- "ifdef" is not used consistently; if good_insns_64 depends
on CONFIG_X86_64, then probably good_insns_32 should depend
on CONFIG_X86_32/EMULATION
- the usage of mm->context.ia32_compat looks wrong if the task
is TIF_X32.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Reviewed-by: Jim Keniston <jkenisto@us.ibm.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Pull Xen fixes from David Vrabel:
"Xen regression and bug fixes for 3.15-rc1:
- fix completely broken 32-bit PV guests caused by x86 refactoring
32-bit thread_info.
- only enable ticketlock slow path on Xen (not bare metal)
- fix two bugs with PV guests not shutting down when requested
- fix a minor memory leak in xen-pciback error path"
* tag 'stable/for-linus-3.15-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/manage: Poweroff forcefully if user-space is not yet up.
xen/xenbus: Avoid synchronous wait on XenBus stalling shutdown/restart.
xen/spinlock: Don't enable them unconditionally.
xen-pciback: silence an unwanted debug printk
xen: fix memory leak in __xen_pcibk_add_pci_dev()
x86/xen: Fix 32-bit PV guests's usage of kernel_stack
Current kprobes in-kernel page fault handler doesn't
expect that its single-stepping can be interrupted by
an NMI handler which may cause a page fault(e.g. perf
with callback tracing).
In that case, the page-fault handled by kprobes and it
misunderstands the page-fault has been caused by the
single-stepping code and tries to recover IP address
to probed address.
But the truth is the page-fault has been caused by the
NMI handler, and do_page_fault failes to handle real
page fault because the IP address is modified and
causes Kernel BUGs like below.
----
[ 2264.726905] BUG: unable to handle kernel NULL pointer dereference at 0000000000000020
[ 2264.727190] IP: [<ffffffff813c46e0>] copy_user_generic_string+0x0/0x40
To handle this correctly, I fixed the kprobes fault
handler to ensure the faulted ip address is its own
single-step buffer instead of checking current kprobe
state.
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Sandeepa Prabhu <sandeepa.prabhu@linaro.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: fche@redhat.com
Cc: systemtap@sourceware.org
Link: http://lkml.kernel.org/r/20140417081644.26341.52351.stgit@ltc230.yrl.intra.hitachi.co.jp
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The following commit:
27f6c573e0 ("x86, CMCI: Add proper detection of end of CMCI storms")
Added two preemption bugs:
- machine_check_poll() does a get_cpu_var() without a matching
put_cpu_var(), which causes preemption imbalance and crashes upon
bootup.
- it does percpu ops without disabling preemption. Preemption is not
disabled due to the mistaken use of a raw spinlock.
To fix these bugs fix the imbalance and change
cmci_discover_lock to a regular spinlock.
Reported-by: Owen Kibel <qmewlo@gmail.com>
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Chen, Gong <gong.chen@linux.intel.com>
Cc: Josh Boyer <jwboyer@fedoraproject.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Alexander Todorov <atodorov@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Link: http://lkml.kernel.org/n/tip-jtjptvgigpfkpvtQxpEk1at2@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
--
arch/x86/kernel/cpu/mcheck/mce.c | 4 +---
arch/x86/kernel/cpu/mcheck/mce_intel.c | 18 +++++++++---------
2 files changed, 10 insertions(+), 12 deletions(-)
Pull x86 fixes from Ingo Molnar:
"Various fixes:
- reboot regression fix
- build message spam fix
- GPU quirk fix
- 'make kvmconfig' fix
plus the wire-up of the renameat2() system call on i386"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86: Remove the PCI reboot method from the default chain
x86/build: Supress "Nothing to be done for ..." messages
x86/gpu: Fix sign extension issue in Intel graphics stolen memory quirks
x86/platform: Fix "make O=dir kvmconfig"
i386: Wire up the renameat2() syscall
Pull perf fixes from Ingo Molnar:
"Tooling fixes, plus a simple hardware-enablement patch for the Intel
RAPL PMU (energy use measurement) on Haswell CPUs, which I hope is
still fine at this stage"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf tools: Instead of redirecting flex output, use -o
perf tools: Fix double free in perf test 21 (code-reading.c)
perf stat: Initialize statistics correctly
perf bench: Set more defaults in the 'numa' suite
perf bench: Fix segfault at the end of an 'all' execution
perf bench: Update manpage to mention numa and futex
perf probe: Use dwarf_getcfi_elf() instead of dwarf_getcfi()
perf probe: Fix to handle errors in line_range searching
perf probe: Fix --line option behavior
perf tools: Pick up libdw without explicit LIBDW_DIR
MAINTAINERS: Change e-mail to kernel.org one
perf callchains: Disable unwind libraries when libelf isn't found
tools lib traceevent: Do not call warning() directly
tools lib traceevent: Print event name when show warning if possible
perf top: Fix documentation of invalid -s option
perf/x86: Enable DRAM RAPL support on Intel Haswell
Steve reported a reboot hang and bisected it back to this commit:
a4f1987e4c x86, reboot: Add EFI and CF9 reboot methods into the default list
He heroically tested all reboot methods and found the following:
reboot=t # triple fault ok
reboot=k # keyboard ctrl FAIL
reboot=b # BIOS ok
reboot=a # ACPI FAIL
reboot=e # EFI FAIL [system has no EFI]
reboot=p # PCI 0xcf9 FAIL
And I think it's pretty obvious that we should only try PCI 0xcf9 as a
last resort - if at all.
The other observation is that (on this box) we should never try
the PCI reboot method, but close with either the 'triple fault'
or the 'BIOS' (terminal!) reboot methods.
Thirdly, CF9_COND is a total misnomer - it should be something like
CF9_SAFE or CF9_CAREFUL, and 'CF9' should be 'CF9_FORCE' ...
So this patch fixes the worst problems:
- it orders the actual reboot logic to follow the reboot ordering
pattern - it was in a pretty random order before for no good
reason.
- it fixes the CF9 misnomers and uses BOOT_CF9_FORCE and
BOOT_CF9_SAFE flags to make the code more obvious.
- it tries the BIOS reboot method before the PCI reboot method.
(Since 'BIOS' is a terminal reboot method resulting in a hang
if it does not work, this is essentially equivalent to removing
the PCI reboot method from the default reboot chain.)
- just for the miraculous possibility of terminal (resulting
in hang) reboot methods of triple fault or BIOS returning
without having done their job, there's an ordering between
them as well.
Reported-and-bisected-and-tested-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Li Aubrey <aubrey.li@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Link: http://lkml.kernel.org/r/20140404064120.GB11877@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The git commit a945928ea2
('xen: Do not enable spinlocks before jump_label_init() has executed')
was added to deal with the jump machinery. Earlier the code
that turned on the jump label was only called by Xen specific
functions. But now that it had been moved to the initcall machinery
it gets called on Xen, KVM, and baremetal - ouch!. And the detection
machinery to only call it on Xen wasn't remembered in the heat
of merge window excitement.
This means that the slowpath is enabled on baremetal while it should
not be.
Reported-by: Waiman Long <waiman.long@hp.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
CC: stable@vger.kernel.org
CC: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Commit 198d208df4 ("x86: Keep
thread_info on thread stack in x86_32") made 32-bit kernels use
kernel_stack to point to thread_info. That change missed a couple of
updates needed by Xen's 32-bit PV guests:
1. kernel_stack needs to be initialized for secondary CPUs
2. GET_THREAD_INFO() now uses %fs register which may not be the
kernel's version when executing xen_iret().
With respect to the second issue, we don't need GET_THREAD_INFO()
anymore: we used it as an intermediate step to get to per_cpu xen_vcpu
and avoid referencing %fs. Now that we are going to use %fs anyway we
may as well go directly to xen_vcpu.
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Pull KVM fixes from Marcelo Tosatti:
- Fix for guest triggerable BUG_ON (CVE-2014-0155)
- CR4.SMAP support
- Spurious WARN_ON() fix
* git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: remove WARN_ON from get_kernel_ns()
KVM: Rename variable smep to cr4_smep
KVM: expose SMAP feature to guest
KVM: Disable SMAP for guests in EPT realmode and EPT unpaging mode
KVM: Add SMAP support when setting CR4
KVM: Remove SMAP bit from CR4_RESERVED_BITS
KVM: ioapic: try to recover if pending_eoi goes out of range
KVM: ioapic: fix assignment of ioapic->rtc_status.pending_eoi (CVE-2014-0155)
Rename variable smep to cr4_smep, which can better reflect the
meaning of the variable.
Signed-off-by: Feng Wu <feng.wu@intel.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
SMAP is disabled if CPU is in non-paging mode in hardware.
However KVM always uses paging mode to emulate guest non-paging
mode with TDP. To emulate this behavior, SMAP needs to be
manually disabled when guest switches to non-paging mode.
Signed-off-by: Feng Wu <feng.wu@intel.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
This patch adds SMAP handling logic when setting CR4 for guests
Thanks a lot to Paolo Bonzini for his suggestion to use the branchless
way to detect SMAP violation.
Signed-off-by: Feng Wu <feng.wu@intel.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
When we build an already built kernel again, arch/x86/syscalls/Makefile
and arch/x86/tools/Makefile emits "Nothing to be done for ..."
messages.
Here is the command log:
$ make defconfig
[ snip ]
$ make
[ snip ]
$ make
make[1]: Nothing to be done for `all'. <-----
make[1]: Nothing to be done for `relocs'. <-----
CHK include/config/kernel.release
CHK include/generated/uapi/linux/version.h
Besides not emitting those, "all" and "relocs" should be added to PHONY as well.
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Acked-by: Peter Foley <pefoley2@pefoley.com>
Acked-by: Michal Marek <mmarek@suse.cz>
Link: http://lkml.kernel.org/r/1397093742-11144-1-git-send-email-yamada.m@jp.panasonic.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Have the KB(),MB(),GB() macros produce unsigned longs to avoid
unintended sign extension issues with the gen2 memory size
detection.
What happens is first the uint8_t returned by
read_pci_config_byte() gets promoted to an int which gets
multiplied by another int from the MB() macro, and finally the
result gets sign extended to size_t.
Although this shouldn't be a problem in practice as all affected
gen2 platforms are 32bit AFAIK, so size_t will be 32 bits.
Reported-by: Bjorn Helgaas <bhelgaas@google.com>
Suggested-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: linux-kernel@vger.kernel.org
Link: http://lkml.kernel.org/r/1397382303-17525-1-git-send-email-ville.syrjala@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
