First, refactor: Dereference the svc_rdma_send_ctxt inside
svc_rdma_send() instead of at every call site.
Then, it can be passed into trace_svcrdma_post_send() to get the
proper completion ID.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Set up a completion ID in each svc_rdma_send_ctxt. The ID is used
to match an incoming Send completion to a transport and to a
previous ib_post_send().
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
When recording a trace event in the Receive path, tie decoding
results and errors to an incoming Receive completion.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Set up a completion ID in each svc_rdma_recv_ctxt. The ID is used
to match an incoming Receive completion to a transport and to a
previous ib_post_recv().
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Use these helpers in a few spots to demonstrate their use.
The remaining open-coded discriminator checks in rpcrdma will be
addressed in subsequent patches.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
- Use the _err naming convention instead
- Remove display of kernel memory address of the controlling xprt
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Final refactor: Replace internals of svc_rdma_send_error() with a
simple call to svc_rdma_send_error_msg().
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Like svc_rdma_send_error(), have svc_rdma_send_error_msg() handle
any error conditions internally, rather than duplicating that
recovery logic at every call site.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
The common "send RDMA_ERR" function should be in svc_rdma_sendto.c,
since that is where the other Send-related functions are located.
So from here, I will beef up svc_rdma_send_error_msg() and deprecate
svc_rdma_send_error().
A generic svc_rdma_send_error_msg() will need to handle both
ERR_CHUNK and ERR_VERS. Copy that logic from svc_rdma_send_error()
to svc_rdma_send_error_msg().
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Another step towards making svc_rdma_send_error_msg() and
svc_rdma_send_error() similar enough to eliminate one of them.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Commit 4757d90b15 ("svcrdma: Report Write/Reply chunk overruns")
made an effort to preserve I/O pages until RDMA Write completion.
In a subsequent patch, I intend to de-duplicate the two functions
that send ERR_CHUNK responses. Pull the save_io_pages() call out of
svc_rdma_send_error_msg() to make it more like
svc_rdma_send_error().
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Commit 07d0ff3b0c ("svcrdma: Clean up Read chunk path") moved the
page saver logic so that it gets executed event when an error occurs.
In that case, the I/O is never posted, and those pages are then
leaked. Errors in this path, however, are quite rare.
Fixes: 07d0ff3b0c ("svcrdma: Clean up Read chunk path")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Add similar tracepoints to those that were recently added on the
client side to track failures in the integ and priv unwrap paths.
And, let's collect the seqno-specific tracepoints together with a
common naming convention.
Regarding the gss_check_seq_num() changes: everywhere else treats
the GSS sequence number as an unsigned 32-bit integer. As far back
as 2.6.12, I couldn't find a compelling reason to do things
differently here. As a defensive change it's better to eliminate
needless implicit sign conversions.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Pull networking fixes from David Miller:
1) Restore previous behavior of CAP_SYS_ADMIN wrt loading networking
BPF programs, from Maciej Żenczykowski.
2) Fix dropped broadcasts in mac80211 code, from Seevalamuthu
Mariappan.
3) Slay memory leak in nl80211 bss color attribute parsing code, from
Luca Coelho.
4) Get route from skb properly in ip_route_use_hint(), from Miaohe Lin.
5) Don't allow anything other than ARPHRD_ETHER in llc code, from Eric
Dumazet.
6) xsk code dips too deeply into DMA mapping implementation internals.
Add dma_need_sync and use it. From Christoph Hellwig
7) Enforce power-of-2 for BPF ringbuf sizes. From Andrii Nakryiko.
8) Check for disallowed attributes when loading flow dissector BPF
programs. From Lorenz Bauer.
9) Correct packet injection to L3 tunnel devices via AF_PACKET, from
Jason A. Donenfeld.
10) Don't advertise checksum offload on ipa devices that don't support
it. From Alex Elder.
11) Resolve several issues in TCP MD5 signature support. Missing memory
barriers, bogus options emitted when using syncookies, and failure
to allow md5 key changes in established states. All from Eric
Dumazet.
12) Fix interface leak in hsr code, from Taehee Yoo.
13) VF reset fixes in hns3 driver, from Huazhong Tan.
14) Make loopback work again with ipv6 anycast, from David Ahern.
15) Fix TX starvation under high load in fec driver, from Tobias
Waldekranz.
16) MLD2 payload lengths not checked properly in bridge multicast code,
from Linus Lüssing.
17) Packet scheduler code that wants to find the inner protocol
currently only works for one level of VLAN encapsulation. Allow
Q-in-Q situations to work properly here, from Toke
Høiland-Jørgensen.
18) Fix route leak in l2tp, from Xin Long.
19) Resolve conflict between the sk->sk_user_data usage of bpf reuseport
support and various protocols. From Martin KaFai Lau.
20) Fix socket cgroup v2 reference counting in some situations, from
Cong Wang.
21) Cure memory leak in mlx5 connection tracking offload support, from
Eli Britstein.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (146 commits)
mlxsw: pci: Fix use-after-free in case of failed devlink reload
mlxsw: spectrum_router: Remove inappropriate usage of WARN_ON()
net: macb: fix call to pm_runtime in the suspend/resume functions
net: macb: fix macb_suspend() by removing call to netif_carrier_off()
net: macb: fix macb_get/set_wol() when moving to phylink
net: macb: mark device wake capable when "magic-packet" property present
net: macb: fix wakeup test in runtime suspend/resume routines
bnxt_en: fix NULL dereference in case SR-IOV configuration fails
libbpf: Fix libbpf hashmap on (I)LP32 architectures
net/mlx5e: CT: Fix memory leak in cleanup
net/mlx5e: Fix port buffers cell size value
net/mlx5e: Fix 50G per lane indication
net/mlx5e: Fix CPU mapping after function reload to avoid aRFS RX crash
net/mlx5e: Fix VXLAN configuration restore after function reload
net/mlx5e: Fix usage of rcu-protected pointer
net/mxl5e: Verify that rpriv is not NULL
net/mlx5: E-Switch, Fix vlan or qos setting in legacy mode
net/mlx5: Fix eeprom support for SFP module
cgroup: Fix sock_cgroup_data on big-endian.
selftests: bpf: Fix detach from sockmap tests
...
Reshuffle the (__)kernel_read and (__)kernel_write helpers, and ensure
all users of in-kernel file I/O use them if they don't use iov_iter
based methods already.
-----BEGIN PGP SIGNATURE-----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=eYsI
-----END PGP SIGNATURE-----
Merge tag 'cleanup-kernel_read_write' of git://git.infradead.org/users/hch/misc
Pull in-kernel read and write op cleanups from Christoph Hellwig:
"Cleanup in-kernel read and write operations
Reshuffle the (__)kernel_read and (__)kernel_write helpers, and ensure
all users of in-kernel file I/O use them if they don't use iov_iter
based methods already.
The new WARN_ONs in combination with syzcaller already found a missing
input validation in 9p. The fix should be on your way through the
maintainer ASAP".
[ This is prep-work for the real changes coming 5.9 ]
* tag 'cleanup-kernel_read_write' of git://git.infradead.org/users/hch/misc:
fs: remove __vfs_read
fs: implement kernel_read using __kernel_read
integrity/ima: switch to using __kernel_read
fs: add a __kernel_read helper
fs: remove __vfs_write
fs: implement kernel_write using __kernel_write
fs: check FMODE_WRITE in __kernel_write
fs: unexport __kernel_write
bpfilter: switch to kernel_write
autofs: switch to kernel_write
cachefiles: switch to kernel_write
Several users of kallsyms_show_value() were performing checks not
during "open". Refactor everything needed to gain proper checks against
file->f_cred for modules, kprobes, and bpf.
-----BEGIN PGP SIGNATURE-----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=ib5Q
-----END PGP SIGNATURE-----
Merge tag 'kallsyms_show_value-v5.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull kallsyms fix from Kees Cook:
"Refactor kallsyms_show_value() users for correct cred.
I'm not delighted by the timing of getting these changes to you, but
it does fix a handful of kernel address exposures, and no one has
screamed yet at the patches.
Several users of kallsyms_show_value() were performing checks not
during "open". Refactor everything needed to gain proper checks
against file->f_cred for modules, kprobes, and bpf"
* tag 'kallsyms_show_value-v5.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
selftests: kmod: Add module address visibility test
bpf: Check correct cred for CAP_SYSLOG in bpf_dump_raw_ok()
kprobes: Do not expose probe addresses to non-CAP_SYSLOG
module: Do not expose section addresses to non-CAP_SYSLOG
module: Refactor section attr into bin attribute
kallsyms: Refactor kallsyms_show_value() to take cred
If the genlmsg_put() call in ethnl_default_dumpit() fails, we bail out
without checking if we already have some messages in current skb like we do
with ethnl_default_dump_one() failure later. Therefore if existing messages
almost fill up the buffer so that there is not enough space even for
netlink and genetlink header, we lose all prepared messages and return and
error.
Rather than duplicating the skb->len check, move the genlmsg_put(),
genlmsg_cancel() and genlmsg_end() calls into ethnl_default_dump_one().
This is also more logical as all message composition will be in
ethnl_default_dump_one() and only iteration logic will be left in
ethnl_default_dumpit().
Fixes: 728480f124 ("ethtool: default handlers for GET requests")
Reported-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
When tcf_block_get() fails inside atm_tc_init(),
atm_tc_put() is called to release the qdisc p->link.q.
But the flow->ref prevents it to do so, as the flow->ref
is still zero.
Fix this by moving the p->link.ref initialization before
tcf_block_get().
Fixes: 6529eaba33 ("net: sched: introduce tcf block infractructure")
Reported-and-tested-by: syzbot+d411cff6ab29cc2c311b@syzkaller.appspotmail.com
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When evaluating access control over kallsyms visibility, credentials at
open() time need to be used, not the "current" creds (though in BPF's
case, this has likely always been the same). Plumb access to associated
file->f_cred down through bpf_dump_raw_ok() and its callers now that
kallsysm_show_value() has been refactored to take struct cred.
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: bpf@vger.kernel.org
Cc: stable@vger.kernel.org
Fixes: 7105e828c0 ("bpf: allow for correlation of maps and helpers in dump")
Signed-off-by: Kees Cook <keescook@chromium.org>
A scenario has been observed where a 'bc_init' message for a link is not
retransmitted if it fails to be received by the peer. This leads to the
peer never establishing the link fully and it discarding all other data
received on the link. In this scenario the message is lost in transit to
the peer.
The issue is traced to the 'nxt_retr' field of the skb not being
initialised for links that aren't a bc_sndlink. This leads to the
comparison in tipc_link_advance_transmq() that gates whether to attempt
retransmission of a message performing in an undesirable way.
Depending on the relative value of 'jiffies', this comparison:
time_before(jiffies, TIPC_SKB_CB(skb)->nxt_retr)
may return true or false given that 'nxt_retr' remains at the
uninitialised value of 0 for non bc_sndlinks.
This is most noticeable shortly after boot when jiffies is initialised
to a high value (to flush out rollover bugs) and we compare a jiffies of,
say, 4294940189 to zero. In that case time_before returns 'true' leading
to the skb not being retransmitted.
The fix is to ensure that all skbs have a valid 'nxt_retr' time set for
them and this is achieved by refactoring the setting of this value into
a central function.
With this fix, transmission losses of 'bc_init' messages do not stall
the link establishment forever because the 'bc_init' message is
retransmitted and the link eventually establishes correctly.
Fixes: 382f598fb6 ("tipc: reduce duplicate packets for unicast traffic")
Acked-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: Hamish Martin <hamish.martin@alliedtelesis.co.nz>
Signed-off-by: David S. Miller <davem@davemloft.net>
In the tx path of l2tp, l2tp_xmit_skb() calls skb_dst_set() to set
skb's dst. However, it will eventually call inet6_csk_xmit() or
ip_queue_xmit() where skb's dst will be overwritten by:
skb_dst_set_noref(skb, dst);
without releasing the old dst in skb. Then it causes dst/dev refcnt leak:
unregister_netdevice: waiting for eth0 to become free. Usage count = 1
This can be reproduced by simply running:
# modprobe l2tp_eth && modprobe l2tp_ip
# sh ./tools/testing/selftests/net/l2tp.sh
So before going to inet6_csk_xmit() or ip_queue_xmit(), skb's dst
should be dropped. This patch is to fix it by removing skb_dst_set()
from l2tp_xmit_skb() and moving skb_dst_drop() into l2tp_xmit_core().
Fixes: 3557baabf2 ("[L2TP]: PPP over L2TP driver core")
Reported-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: James Chapman <jchapman@katalix.com>
Tested-by: James Chapman <jchapman@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
CLC proposal messages of future SMCD versions could be larger than SMCD
V1 CLC proposal messages.
To enable toleration in SMC V1 the receival of CLC proposal messages
is adapted:
* accept larger length values in CLC proposal
* check trailing eye catcher for incoming CLC proposal with V1 length only
* receive the whole CLC proposal even in cases it does not fit into the
V1 buffer
Fixes: e7b7a64a84 ("smc: support variable CLC proposal messages")
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The similar smc_ib_devices spinlock has been converted to a mutex.
Protecting the smcd_dev_list by a mutex is possible as well. This
patch converts the smcd_dev_list spinlock to a mutex.
Fixes: c6ba7c9ba4 ("net/smc: add base infrastructure for SMC-D and ISM")
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tests showed this BUG:
[572555.252867] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:935
[572555.252876] in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 131031, name: smcapp
[572555.252879] INFO: lockdep is turned off.
[572555.252883] CPU: 1 PID: 131031 Comm: smcapp Tainted: G O 5.7.0-rc3uschi+ #356
[572555.252885] Hardware name: IBM 3906 M03 703 (LPAR)
[572555.252887] Call Trace:
[572555.252896] [<00000000ac364554>] show_stack+0x94/0xe8
[572555.252901] [<00000000aca1f400>] dump_stack+0xa0/0xe0
[572555.252906] [<00000000ac3c8c10>] ___might_sleep+0x260/0x280
[572555.252910] [<00000000acdc0c98>] __mutex_lock+0x48/0x940
[572555.252912] [<00000000acdc15c2>] mutex_lock_nested+0x32/0x40
[572555.252975] [<000003ff801762d0>] mlx5_lag_get_roce_netdev+0x30/0xc0 [mlx5_core]
[572555.252996] [<000003ff801fb3aa>] mlx5_ib_get_netdev+0x3a/0xe0 [mlx5_ib]
[572555.253007] [<000003ff80063848>] smc_pnet_find_roce_resource+0x1d8/0x310 [smc]
[572555.253011] [<000003ff800602f0>] __smc_connect+0x1f0/0x3e0 [smc]
[572555.253015] [<000003ff80060634>] smc_connect+0x154/0x190 [smc]
[572555.253022] [<00000000acbed8d4>] __sys_connect+0x94/0xd0
[572555.253025] [<00000000acbef620>] __s390x_sys_socketcall+0x170/0x360
[572555.253028] [<00000000acdc6800>] system_call+0x298/0x2b8
[572555.253030] INFO: lockdep is turned off.
Function smc_pnet_find_rdma_dev() might be called from
smc_pnet_find_roce_resource(). It holds the smc_ib_devices list
spinlock while calling infiniband op get_netdev(). At least for mlx5
the get_netdev operation wants mutex serialization, which conflicts
with the smc_ib_devices spinlock.
This patch switches the smc_ib_devices spinlock into a mutex to
allow sleeping when calling get_netdev().
Fixes: a4cf0443c4 ("smc: introduce SMC as an IB-client")
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Wait for pending sends only when smc_switch_conns() found a link to move
the connections to. Do not wait during link freeing, this can lead to
permanent hang situations. And refuse to provide a new tx slot on an
unusable link.
Fixes: c6f02ebeea ("net/smc: switch connections to alternate link")
Reviewed-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There might be races in scenarios where both SMC link groups are on the
same system. Prevent that by creating separate wait queues for LLC flows
and messages. Switch to non-interruptable versions of wait_event() and
wake_up() for the llc flow waiter to make sure the waiters get control
sequentially. Fine tune the llc_flow_lock to include the assignment of
the message. Write to system log when an unexpected message was
dropped. And remove an extra indirection and use the existing local
variable lgr in smc_llc_enqueue().
Fixes: 555da9af82 ("net/smc: add event-based llc_flow framework")
Reviewed-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
While pipes don't really need sb_writers projection, __kernel_write is an
interface better kept private, and the additional rw_verify_area does not
hurt here.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Commit e57f61858b ("net: bridge: mcast: fix stale nsrcs pointer in
igmp3/mld2 report handling") introduced a bug in the IPv6 header payload
length check which would potentially lead to rejecting a valid MLD2 Report:
The check needs to take into account the 2 bytes for the "Number of
Sources" field in the "Multicast Address Record" before reading it.
And not the size of a pointer to this field.
Fixes: e57f61858b ("net: bridge: mcast: fix stale nsrcs pointer in igmp3/mld2 report handling")
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: David S. Miller <davem@davemloft.net>
When tcf_ct_act execute the tcf_lastuse_update should
be update or the used stats never update
filter protocol ip pref 3 flower chain 0
filter protocol ip pref 3 flower chain 0 handle 0x1
eth_type ipv4
dst_ip 1.1.1.1
ip_flags frag/firstfrag
skip_hw
not_in_hw
action order 1: ct zone 1 nat pipe
index 1 ref 1 bind 1 installed 103 sec used 103 sec
Action statistics:
Sent 151500 bytes 101 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
cookie 4519c04dc64a1a295787aab13b6a50fb
Signed-off-by: wenxu <wenxu@ucloud.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
The RFC 8684 mandates that no-data DATA FIN packets should carry
a DSS with 0 sequence number and data len equal to 1. Currently,
on FIN retransmission we re-use the existing mapping; if the previous
fin transmission was part of a partially acked data packet, we could
end-up writing in the egress packet a non-compliant DSS.
The above will be detected by a "Bad mapping" warning on the receiver
side.
This change addresses the issue explicitly checking for 0 len packet
when adding the DATA_FIN option.
Fixes: 6d0060f600 ("mptcp: Write MPTCP DSS headers to outgoing data packets")
Reported-by: syzbot+42a07faa5923cfaeb9c9@syzkaller.appspotmail.com
Tested-by: Christoph Paasch <cpaasch@apple.com>
Reviewed-by: Christoph Paasch <cpaasch@apple.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
IPv4 ping sockets don't set fl4.fl4_icmp_{type,code}, which leads to
incomplete IPsec ACQUIRE messages being sent to userspace. Currently,
both raw sockets and IPv6 ping sockets set those fields.
Expected output of "ip xfrm monitor":
acquire proto esp
sel src 10.0.2.15/32 dst 8.8.8.8/32 proto icmp type 8 code 0 dev ens4
policy src 10.0.2.15/32 dst 8.8.8.8/32
<snip>
Currently with ping sockets:
acquire proto esp
sel src 10.0.2.15/32 dst 8.8.8.8/32 proto icmp type 0 code 0 dev ens4
policy src 10.0.2.15/32 dst 8.8.8.8/32
<snip>
The Libreswan test suite found this problem after Fedora changed the
value for the sysctl net.ipv4.ping_group_range.
Fixes: c319b4d76b ("net: ipv4: add IPPROTO_ICMP socket kind")
Reported-by: Paul Wouters <pwouters@redhat.com>
Tested-by: Paul Wouters <pwouters@redhat.com>
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
When we clone a socket in sk_clone_lock(), its sk_cgrp_data is
copied, so the cgroup refcnt must be taken too. And, unlike the
sk_alloc() path, sock_update_netprioidx() is not called here.
Therefore, it is safe and necessary to grab the cgroup refcnt
even when cgroup_sk_alloc is disabled.
sk_clone_lock() is in BH context anyway, the in_interrupt()
would terminate this function if called there. And for sk_alloc()
skcd->val is always zero. So it's safe to factor out the code
to make it more readable.
The global variable 'cgroup_sk_alloc_disabled' is used to determine
whether to take these reference counts. It is impossible to make
the reference counting correct unless we save this bit of information
in skcd->val. So, add a new bit there to record whether the socket
has already taken the reference counts. This obviously relies on
kmalloc() to align cgroup pointers to at least 4 bytes,
ARCH_KMALLOC_MINALIGN is certainly larger than that.
This bug seems to be introduced since the beginning, commit
d979a39d72 ("cgroup: duplicate cgroup reference when cloning sockets")
tried to fix it but not compeletely. It seems not easy to trigger until
the recent commit 090e28b229
("netprio_cgroup: Fix unlimited memory leak of v2 cgroups") was merged.
Fixes: bd1060a1d6 ("sock, cgroup: add sock->sk_cgroup")
Reported-by: Cameron Berkenpas <cam@neo-zeon.de>
Reported-by: Peter Geis <pgwipeout@gmail.com>
Reported-by: Lu Fengqi <lufq.fnst@cn.fujitsu.com>
Reported-by: Daniël Sonck <dsonck92@gmail.com>
Reported-by: Zhang Qiang <qiang.zhang@windriver.com>
Tested-by: Cameron Berkenpas <cam@neo-zeon.de>
Tested-by: Peter Geis <pgwipeout@gmail.com>
Tested-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Zefan Li <lizefan@huawei.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Roman Gushchin <guro@fb.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Thomas reported a regression with IPv6 and anycast using the following
reproducer:
echo 1 > /proc/sys/net/ipv6/conf/all/forwarding
ip -6 a add fc12::1/16 dev lo
sleep 2
echo "pinging lo"
ping6 -c 2 fc12::
The conversion of addrconf_f6i_alloc to use ip6_route_info_create missed
the use of fib6_is_reject which checks addresses added to the loopback
interface and sets the REJECT flag as needed. Update fib6_is_reject for
loopback checks to handle RTF_ANYCAST addresses.
Fixes: c7a1ce397a ("ipv6: Change addrconf_f6i_alloc to use ip6_route_info_create")
Reported-by: thomas.gambier@nexedi.com
Signed-off-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Brian reported a crash in IPv6 code when using rpfilter with a setup
running FRR and external nexthop objects. The root cause of the crash
is fib6_select_path setting fib6_nh in the result to NULL because of
an improper check for nexthop objects.
More specifically, rpfilter invokes ip6_route_lookup with flowi6_oif
set causing fib6_select_path to be called with have_oif_match set.
fib6_select_path has early check on have_oif_match and jumps to the
out label which presumes a builtin fib6_nh. This path is invalid for
nexthop objects; for external nexthops fib6_select_path needs to just
return if the fib6_nh has already been set in the result otherwise it
returns after the call to nexthop_path_fib6_result. Update the check
on have_oif_match to not bail on external nexthops.
Update selftests for this problem.
Fixes: f88d8ea67f ("ipv6: Plumb support for nexthop object in a fib6_info")
Reported-by: Brian Rak <brak@choopa.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) Use kvfree() to release vmalloc()'ed areas in ipset, from Eric Dumazet.
2) UAF in nfnetlink_queue from the nf_conntrack_update() path.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
There are a couple of places in net/sched/ that check skb->protocol and act
on the value there. However, in the presence of VLAN tags, the value stored
in skb->protocol can be inconsistent based on whether VLAN acceleration is
enabled. The commit quoted in the Fixes tag below fixed the users of
skb->protocol to use a helper that will always see the VLAN ethertype.
However, most of the callers don't actually handle the VLAN ethertype, but
expect to find the IP header type in the protocol field. This means that
things like changing the ECN field, or parsing diffserv values, stops
working if there's a VLAN tag, or if there are multiple nested VLAN
tags (QinQ).
To fix this, change the helper to take an argument that indicates whether
the caller wants to skip the VLAN tags or not. When skipping VLAN tags, we
make sure to skip all of them, so behaviour is consistent even in QinQ
mode.
To make the helper usable from the ECN code, move it to if_vlan.h instead
of pkt_sched.h.
v3:
- Remove empty lines
- Move vlan variable definitions inside loop in skb_protocol()
- Also use skb_protocol() helper in IP{,6}_ECN_decapsulate() and
bpf_skb_ecn_set_ce()
v2:
- Use eth_type_vlan() helper in skb_protocol()
- Also fix code that reads skb->protocol directly
- Change a couple of 'if/else if' statements to switch constructs to avoid
calling the helper twice
Reported-by: Ilya Ponetayev <i.ponetaev@ndmsystems.com>
Fixes: d8b9605d26 ("net: sched: fix skb->protocol use in case of accelerated vlan path")
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
leak and a module unloading bug in the /proc/fs/nfsd/clients/ code, and
a compile warning.
-----BEGIN PGP SIGNATURE-----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=wF3M
-----END PGP SIGNATURE-----
Merge tag 'nfsd-5.8-1' of git://linux-nfs.org/~bfields/linux
Pull nfsd fixes from Bruce Fields:
"Fixes for a umask bug on exported filesystems lacking ACL support, a
leak and a module unloading bug in the /proc/fs/nfsd/clients/ code,
and a compile warning"
* tag 'nfsd-5.8-1' of git://linux-nfs.org/~bfields/linux:
SUNRPC: Add missing definition of ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE
nfsd: fix nfsdfs inode reference count leak
nfsd4: fix nfsdfs reference count loop
nfsd: apply umask on fs without ACL support
This essentially reverts commit 7212303268 ("tcp: md5: reject TCP_MD5SIG
or TCP_MD5SIG_EXT on established sockets")
Mathieu reported that many vendors BGP implementations can
actually switch TCP MD5 on established flows.
Quoting Mathieu :
Here is a list of a few network vendors along with their behavior
with respect to TCP MD5:
- Cisco: Allows for password to be changed, but within the hold-down
timer (~180 seconds).
- Juniper: When password is initially set on active connection it will
reset, but after that any subsequent password changes no network
resets.
- Nokia: No notes on if they flap the tcp connection or not.
- Ericsson/RedBack: Allows for 2 password (old/new) to co-exist until
both sides are ok with new passwords.
- Meta-Switch: Expects the password to be set before a connection is
attempted, but no further info on whether they reset the TCP
connection on a change.
- Avaya: Disable the neighbor, then set password, then re-enable.
- Zebos: Would normally allow the change when socket connected.
We can revert my prior change because commit 9424e2e7ad ("tcp: md5: fix potential
overestimation of TCP option space") removed the leak of 4 kernel bytes to
the wire that was the main reason for my patch.
While doing my investigations, I found a bug when a MD5 key is changed, leading
to these commits that stable teams want to consider before backporting this revert :
Commit 6a2febec33 ("tcp: md5: add missing memory barriers in tcp_md5_do_add()/tcp_md5_hash_key()")
Commit e6ced831ef ("tcp: md5: refine tcp_md5_do_add()/tcp_md5_hash_key() barriers")
Fixes: 7212303268 "tcp: md5: reject TCP_MD5SIG or TCP_MD5SIG_EXT on established sockets"
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Whenever tcp_try_rmem_schedule() returns an error, we are under
trouble and should make sure to wakeup readers so that they
can drain socket queues and eventually make room.
Fixes: 03f45c883c ("tcp: avoid extra wakeups for SO_RCVLOWAT users")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When no full socket is available, skbs are sent over a per-netns
control socket. Its sk_mark is temporarily adjusted to match that
of the real (request or timewait) socket or to reflect an incoming
skb, so that the outgoing skb inherits this in __ip_make_skb.
Introduction of the socket cookie mark field broke this. Now the
skb is set through the cookie and cork:
<caller> # init sockc.mark from sk_mark or cmsg
ip_append_data
ip_setup_cork # convert sockc.mark to cork mark
ip_push_pending_frames
ip_finish_skb
__ip_make_skb # set skb->mark to cork mark
But I missed these special control sockets. Update all callers of
__ip(6)_make_skb that were originally missed.
For IPv6, the same two icmp(v6) paths are affected. The third
case is not, as commit 92e55f412c ("tcp: don't annotate
mark on control socket from tcp_v6_send_response()") replaced
the ctl_sk->sk_mark with passing the mark field directly as a
function argument. That commit predates the commit that
introduced the bug.
Fixes: c6af0c227a ("ip: support SO_MARK cmsg")
Signed-off-by: Willem de Bruijn <willemb@google.com>
Reported-by: Martin KaFai Lau <kafai@fb.com>
Reviewed-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Whenever cookie_init_timestamp() has been used to encode
ECN,SACK,WSCALE options, we can not remove the TS option in the SYNACK.
Otherwise, tcp_synack_options() will still advertize options like WSCALE
that we can not deduce later when receiving the packet from the client
to complete 3WHS.
Note that modern linux TCP stacks wont use MD5+TS+SACK in a SYN packet,
but we can not know for sure that all TCP stacks have the same logic.
Before the fix a tcpdump would exhibit this wrong exchange :
10:12:15.464591 IP C > S: Flags [S], seq 4202415601, win 65535, options [nop,nop,md5 valid,mss 1400,sackOK,TS val 456965269 ecr 0,nop,wscale 8], length 0
10:12:15.464602 IP S > C: Flags [S.], seq 253516766, ack 4202415602, win 65535, options [nop,nop,md5 valid,mss 1400,nop,nop,sackOK,nop,wscale 8], length 0
10:12:15.464611 IP C > S: Flags [.], ack 1, win 256, options [nop,nop,md5 valid], length 0
10:12:15.464678 IP C > S: Flags [P.], seq 1:13, ack 1, win 256, options [nop,nop,md5 valid], length 12
10:12:15.464685 IP S > C: Flags [.], ack 13, win 65535, options [nop,nop,md5 valid], length 0
After this patch the exchange looks saner :
11:59:59.882990 IP C > S: Flags [S], seq 517075944, win 65535, options [nop,nop,md5 valid,mss 1400,sackOK,TS val 1751508483 ecr 0,nop,wscale 8], length 0
11:59:59.883002 IP S > C: Flags [S.], seq 1902939253, ack 517075945, win 65535, options [nop,nop,md5 valid,mss 1400,sackOK,TS val 1751508479 ecr 1751508483,nop,wscale 8], length 0
11:59:59.883012 IP C > S: Flags [.], ack 1, win 256, options [nop,nop,md5 valid,nop,nop,TS val 1751508483 ecr 1751508479], length 0
11:59:59.883114 IP C > S: Flags [P.], seq 1:13, ack 1, win 256, options [nop,nop,md5 valid,nop,nop,TS val 1751508483 ecr 1751508479], length 12
11:59:59.883122 IP S > C: Flags [.], ack 13, win 256, options [nop,nop,md5 valid,nop,nop,TS val 1751508483 ecr 1751508483], length 0
11:59:59.883152 IP S > C: Flags [P.], seq 1:13, ack 13, win 256, options [nop,nop,md5 valid,nop,nop,TS val 1751508484 ecr 1751508483], length 12
11:59:59.883170 IP C > S: Flags [.], ack 13, win 256, options [nop,nop,md5 valid,nop,nop,TS val 1751508484 ecr 1751508484], length 0
Of course, no SACK block will ever be added later, but nothing should break.
Technically, we could remove the 4 nops included in MD5+TS options,
but again some stacks could break seeing not conventional alignment.
Fixes: 4957faade1 ("TCPCT part 1g: Responder Cookie => Initiator")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Florian Westphal <fw@strlen.de>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In testing with mprds enabled, Oracle Cluster nodes after reboot were
not able to communicate with others nodes and so failed to rejoin
the cluster. Peers with lower IP address initiated connection but the
node could not respond as it choose a different path and could not
initiate a connection as it had a higher IP address.
With this patch, when a node sends out a packet and the selected path
is down, all other paths are also checked and any down paths are
re-connected.
Reviewed-by: Ka-cheong Poon <ka-cheong.poon@oracle.com>
Reviewed-by: David Edmondson <david.edmondson@oracle.com>
Signed-off-by: Somasundaram Krishnasamy <somasundaram.krishnasamy@oracle.com>
Signed-off-by: Rao Shoaib <rao.shoaib@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
My prior fix went a bit too far, according to Herbert and Mathieu.
Since we accept that concurrent TCP MD5 lookups might see inconsistent
keys, we can use READ_ONCE()/WRITE_ONCE() instead of smp_rmb()/smp_wmb()
Clearing all key->key[] is needed to avoid possible KMSAN reports,
if key->keylen is increased. Since tcp_md5_do_add() is not fast path,
using __GFP_ZERO to clear all struct tcp_md5sig_key is simpler.
data_race() was added in linux-5.8 and will prevent KCSAN reports,
this can safely be removed in stable backports, if data_race() is
not yet backported.
v2: use data_race() both in tcp_md5_hash_key() and tcp_md5_do_add()
Fixes: 6a2febec33 ("tcp: md5: add missing memory barriers in tcp_md5_do_add()/tcp_md5_hash_key()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Marco Elver <elver@google.com>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
