[Why]
When CONFIG_DRM_AMD_SECURE_DISPLAY is enabled, it will try
to register vertical interrupt 0 for specific task.
Currently, only dcn10 have defined relevant info for vertical interrupt
0. If we enable CONFIG_DRM_AMD_SECURE_DISPLAY for other dcn ASIC, will
get DC_IRQ_SOURCE_INVALID while calling dc_interrupt_to_irq_source() and
cause pointer errors.
[How]
Add support of vertical interrupt 0 for all dcn ASIC.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On the dce_v6_0 and dce_v8_0 hpd tear down callback, the tmp variable
should be written into the control register instead of 0.
Reviewed-by: André Almeida <andrealmeid@igalia.com>
Signed-off-by: Maíra Canal <mairacanal@riseup.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The scratch register should be accessed through MMIO instead of RLCG
in SRIOV, since it being used in RLCG register access function.
Fixes: d54762cc3e ("drm/amdgpu: nuke dynamic gfx scratch reg allocation")
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Gavin Wan <Gavin.Wan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
TTM used to track the "acc_size" of all BOs internally. We needed to
keep track of it in our memory reservation to avoid TTM running out
of memory in its own accounting. However, that "acc_size" accounting
has since been removed from TTM. Therefore we don't really need to
track it any more.
Signed-off-by: Alex Sierra <alex.sierra@amd.com>
Reviewed-by: Philip Yang <philip.yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Smatch complains that:
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc.c:3369 commit_planes_for_stream()
warn: variable dereferenced before check 'stream' (see line 3114)
The 'stream' pointer cannot be NULL and the check can be removed.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The new display engine uses floating point math, which is not supported
by KCOV. Commit 9d1d02ff36 ("drm/amd/display: Don't build DCN1 when kcov
is enabled") tried to work around the problem by disabling
CONFIG_DRM_AMD_DC_DCN if KCOV_INSTRUMENT_ALL and KCOV_ENABLE_COMPARISONS
are enabled. The result is that KCOV can not be enabled on systems which
require this display engine. A much simpler and less invasive solution is
to disable KCOV selectively when compiling the display enagine while
keeping it enabled for the rest of the kernel.
Fixes: 9d1d02ff36 ("drm/amd/display: Don't build DCN1 when kcov is enabled")
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Leo Li <sunpeng.li@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Save the original stable pstate on ctx init and restore
it on ctx fini so that we restore a manually selected
stable pstate on ctx exit.
v2: fix init order (Alex)
v3: don't add new variable to ctx struct (Evan)
Fixes: c65b364c52 ("drm/amdgpu/ctx: only reset stable pstate if the user changed it (v2)")
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Align RDNA2.x with other asics. One HDP bit per SDMA instance,
aligned with firmware. This is effectively a revert of
commit 369b7d04ba ("drm/amdgpu/nbio2.3: don't use GPU_HDP_FLUSH bit 12").
On further discussions with the relevant hardware teams,
re-align the bits for SDMA.
Fixes: 369b7d04ba ("drm/amdgpu/nbio2.3: don't use GPU_HDP_FLUSH bit 12")
Reviewed-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Align aldebaran with all other asics. One HDP bit per
SDMA instance, aligned with firmware. This is effectively
a revert of
commit a0f9f85466 ("drm/amdgpu/nbio7.4: don't use GPU_HDP_FLUSH bit 12").
On further discussions with the relevant hardware teams,
re-align the bits for SDMA.
Fixes: a0f9f85466 ("drm/amdgpu/nbio7.4: don't use GPU_HDP_FLUSH bit 12")
Reviewed-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In the case of SRIOV, the register smnMp1_PMI_3_FIFO will get an invalid
value which will cause the "shift out of bound". In Ubuntu22.04, this
issue will be checked an related call trace will be reported in dmesg.
Signed-off-by: lin cao <lin.cao@amd.com>
Reviewed-by: Jingwen Chen <Jingwen.Chen2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixed below checkpatch warnings and errors
drivers/gpu/drm/amd/amdgpu/amdgpu_acp.c:131: CHECK: Comparison to NULL could be written "apd"
drivers/gpu/drm/amd/amdgpu/amdgpu_acp.c:150: CHECK: Comparison to NULL could be written "apd"
drivers/gpu/drm/amd/amdgpu/amdgpu_acp.c:196: CHECK: Prefer kernel type 'u64' over 'uint64_t'
drivers/gpu/drm/amd/amdgpu/amdgpu_acp.c:224: CHECK: Please don't use multiple blank lines
drivers/gpu/drm/amd/amdgpu/amdgpu_acp.c:226: CHECK: Comparison to NULL could be written "!adev->acp.acp_genpd"
drivers/gpu/drm/amd/amdgpu/amdgpu_acp.c:233: CHECK: Please don't use multiple blank lines
drivers/gpu/drm/amd/amdgpu/amdgpu_acp.c:239: CHECK: Alignment should match open parenthesis
drivers/gpu/drm/amd/amdgpu/amdgpu_acp.c:241: CHECK: Comparison to NULL could be written "!adev->acp.acp_cell"
drivers/gpu/drm/amd/amdgpu/amdgpu_acp.c:247: CHECK: Comparison to NULL could be written "!adev->acp.acp_res"
drivers/gpu/drm/amd/amdgpu/amdgpu_acp.c:253: CHECK: Comparison to NULL could be written "!i2s_pdata"
drivers/gpu/drm/amd/amdgpu/amdgpu_acp.c:350: CHECK: Alignment should match open parenthesis
drivers/gpu/drm/amd/amdgpu/amdgpu_acp.c:550: ERROR: that open brace { should be on the previous line
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
amd-drm-next-5.20-2022-07-14:
amdgpu:
- DCN3.2 updates
- DC SubVP support
- DP MST fixes
- Audio fixes
- DC code cleanup
- SMU13 updates
- Adjust GART size on newer APUs for S/G display
- Soft reset for GFX 11
- Soft reset for SDMA 6
- Add gfxoff status query for vangogh
- Improve BO domain pinning
- Fix timestamps for cursor only commits
- MES fixes
- DCN 3.1.4 support
- Misc fixes
- Misc code cleanup
amdkfd:
- Simplify GPUVM validation
- Unified memory for CWSR save/restore area
- fix possible list corruption on queue failure
radeon:
- Fix bogus power of two warning
UAPI:
- Unified memory for CWSR save/restore area for KFD
Proposed userspace: https://lists.freedesktop.org/archives/amd-gfx/2022-June/080952.html
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220714214716.8203-1-alexander.deucher@amd.com
While trying to fix another issue, it occurred to me that I don't actually
think there is any situation where we want pm_runtime_put() in nouveau to
be synchronous. In fact, this kind of just seems like it would cause
issues where we may unexpectedly block a thread we don't expect to be
blocked.
So, let's only use pm_runtime_put_autosuspend().
Changes since v1:
* Use pm_runtime_put_autosuspend(), not pm_runtime_put()
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: David Airlie <airlied@linux.ie>
Fixes: 3a6536c51d ("drm/nouveau: Intercept ACPI_VIDEO_NOTIFY_PROBE")
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: <stable@vger.kernel.org> # v4.10+
Link: https://patchwork.freedesktop.org/patch/msgid/20220714174234.949259-3-lyude@redhat.com
It looks like that when we moved nouveau over to using drm_dp_aux_init()
and registering it's aux bus during late connector registration, we totally
forgot to fix the failure codepath in nouveau_connector_create() - as it
still seems to assume that drm_dp_aux_init() can fail (it can't).
So, let's fix that and also add a missing check to ensure that we've
properly allocated nv_connector->aux.name while we're at it.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: David Airlie <airlied@linux.ie>
Fixes: fd43ad9d47 ("drm/nouveau/kms/nv50-: Move AUX adapter reg to connector late register/early unregister")
Cc: <stable@vger.kernel.org> # v5.14+
Link: https://patchwork.freedesktop.org/patch/msgid/20220526204313.656473-1-lyude@redhat.com
Display mode library for DCN 3.1.4
v2: squash in checkpatch fix (Alex)
Signed-off-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Display Core support for DCN 3.1.4
v2:(squash)fix non-x86 in dc/dcn314/Makefile
Properly handle PPC as well. (Alex)
v3: minor cleanup (Alex)
v4: fix comment (Alex)
Signed-off-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
IRQ services to support DCN 3.1.4 interrupts.
v2: make to_dal_irq_source_dcn314 static (Alex)
Signed-off-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Register headers for the following IPs:
- DCN 3.1.4
- DPCS 3.1.4
v2:(squash) clean up (Alex)
Signed-off-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
