When a XSK pool gets mapped, xp_check_dma_contiguity() adds bit 0x1
to pages' DMA addresses that go in ascending order and at 4K stride.
The problem is that the bit does not get cleared before doing unmap.
As a result, a lot of warnings from iommu_dma_unmap_page() are seen
in dmesg, which indicates that lookups by iommu_iova_to_phys() fail.
Fixes: 2b43470add ("xsk: Introduce AF_XDP buffer allocation API")
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/20220628091848.534803-1-ivan.malov@oktetlabs.ru
On some Panasonic models the volume up/down/mute keypresses get
reported both through the Panasonic ACPI HKEY interface as well as
through the atkbd device.
Filter out the atkbd scan-codes for these to avoid reporting presses
twice.
Note normally we would leave the filtering of these to userspace by mapping
the scan-codes to KEY_UNKNOWN through /lib/udev/hwdb.d/60-keyboard.hwdb.
However in this case that would cause regressions since we were filtering
the Panasonic ACPI HKEY events before, so filter these in the kernel.
Fixes: ed83c91718 ("platform/x86: panasonic-laptop: Resolve hotkey double trigger bug")
Reported-and-tested-by: Stefan Seyfried <seife+kernel@b1-systems.com>
Reported-and-tested-by: Kenneth Chan <kenneth.t.chan@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220624112340.10130-7-hdegoede@redhat.com
Some systems have an ACPI video bus but not ACPI video devices with
backlight capability. On these devices brightness key-presses are
(logically) not reported through the ACPI video bus.
Change how acpi_video_handles_brightness_key_presses() determines if
brightness key-presses are handled by the ACPI video driver to avoid
vendor specific drivers/platform/x86 drivers filtering out their
brightness key-presses even though they are the only ones reporting
these presses.
Fixes: ed83c91718 ("platform/x86: panasonic-laptop: Resolve hotkey double trigger bug")
Reported-and-tested-by: Stefan Seyfried <seife+kernel@b1-systems.com>
Reported-and-tested-by: Kenneth Chan <kenneth.t.chan@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220624112340.10130-2-hdegoede@redhat.com
To pick the changes in:
bfbab44568 ("KVM: arm64: Implement PSCI SYSTEM_SUSPEND")
7b33a09d03 ("KVM: arm64: Add support for userspace to suspend a vCPU")
ffbb61d09f ("KVM: x86: Accept KVM_[GS]ET_TSC_KHZ as a VM ioctl.")
661a20fab7 ("KVM: x86/xen: Advertise and document KVM_XEN_HVM_CONFIG_EVTCHN_SEND")
fde0451be8 ("KVM: x86/xen: Support per-vCPU event channel upcall via local APIC")
28d1629f75 ("KVM: x86/xen: Kernel acceleration for XENVER_version")
5363952605 ("KVM: x86/xen: handle PV timers oneshot mode")
942c2490c2 ("KVM: x86/xen: Add KVM_XEN_VCPU_ATTR_TYPE_VCPU_ID")
2fd6df2f2b ("KVM: x86/xen: intercept EVTCHNOP_send from guests")
35025735a7 ("KVM: x86/xen: Support direct injection of event channel events")
That automatically adds support for this new ioctl:
$ tools/perf/trace/beauty/kvm_ioctl.sh > before
$ cp include/uapi/linux/kvm.h tools/include/uapi/linux/kvm.h
$ tools/perf/trace/beauty/kvm_ioctl.sh > after
$ diff -u before after
--- before 2022-06-28 12:13:07.281150509 -0300
+++ after 2022-06-28 12:13:16.423392896 -0300
@@ -98,6 +98,7 @@
[0xcc] = "GET_SREGS2",
[0xcd] = "SET_SREGS2",
[0xce] = "GET_STATS_FD",
+ [0xd0] = "XEN_HVM_EVTCHN_SEND",
[0xe0] = "CREATE_DEVICE",
[0xe1] = "SET_DEVICE_ATTR",
[0xe2] = "GET_DEVICE_ATTR",
$
This silences these perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/kvm.h' differs from latest version at 'include/uapi/linux/kvm.h'
diff -u tools/include/uapi/linux/kvm.h include/uapi/linux/kvm.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Joao Martins <joao.m.martins@oracle.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Oliver Upton <oupton@google.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Link: http://lore.kernel.org/lkml/Yrs4RE+qfgTaWdAt@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The BPF subsystem consists of a large number of pieces. There is not a
single person that understands it all. Yet reviews are crucially important
for the BPF community to provide productive quality feedback to contributors
in a timely manner and therefore to ultimately expand the number of active
developers in the community.
So far, the BPF community had a two-stage review system, that is, a weekly
rotation among 7 developers (Alexei, Daniel, Andrii, Martin, Song, Yonghong,
John) as a first-level review of all inbound patches accompanied by a BPF CI
system which runs the in-tree BPF selftests to check for regressions for
every new patch, and then, a final check by Alexei, Daniel, Andrii to apply
the patches to either bpf or bpf-next trees.
This system worked well for the last ~3.5 years, but clearly reaches its
limits these days as it does not scale enough. Especially, as we also need
to allow enough room for every developer to contribute patches themselves,
integrate with their day to day job, and in particular avoid burnout. We
want to better scale both horizontally and vertically going forward.
On the horizontal scale, we are adding more developers (KP, Stan, Hao, Jiri)
to the overall core reviewer team, thus growing to 11 people in total. The
weekly rotation for the horizontal oncall reviewer is shortened to 1/2 week
(Mo - Wed and Thur - Fri). Instead of just patches, the coverage however
extends also generally to triage and reply to mailing list traffic (e.g. RFCs,
questions, etc).
On the vertical scale, there is clearly a need for deep expertise areas to
assign dedicated maintainer/reviewer teams that are responsible for code
reviews and help with design of individual building blocks. To some degree
we have been doing this implicitly, but the point is to formalize the teams
and commitment.
There is an overlap between areas and boundaries are intentionally grey. These
additional entries provide a guidance on who has to look at the patches. The
patch series which span multiple areas will be looked at by multiple people.
The vertical review with areas of deep expertise are bundled at the same time
with the horizontal side.
This patch cleans up a bit the BPF entries, adds mentioned developers to
the horizontal scale and creates new sub-entries with teams for developers
committing to the above outlined vertical scale. Also, pw.git tools we use
for BPF tree maintenance have been updated with a new pw-schedule script to
semi-automate vertical oncall review rotation.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <martin.lau@linux.dev>
Acked-by: Song Liu <song@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: Mykola Lysenko <mykolal@fb.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: KP Singh <kpsingh@kernel.org>
Acked-by: Stanislav Fomichev <sdf@google.com>
Acked-by: Hao Luo <haoluo@google.com>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Link: https://git.kernel.org/pub/scm/linux/kernel/git/dborkman/pw.git
Link: https://lore.kernel.org/bpf/5bdc73e7f5a087299589944fa074563cdf2c2c1a.1656353995.git.daniel@iogearbox.net
Pull cpufreq ARM fixes for 5.19-rc5 from Viresh Kumar:
- Fix missing of_node_put for qoriq and pmac32 driver (Liang He).
- Fix issues around throttle interrupt for qcom driver (Stephen Boyd).
- Add MT8186 to cpufreq-dt-platdev blocklist (AngeloGioacchino Del Regno).
* tag 'cpufreq-arm-fixes-5.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
cpufreq: Add MT8186 to cpufreq-dt-platdev blocklist
cpufreq: pmac32-cpufreq: Fix refcount leak bug
cpufreq: qcom-hw: Don't do lmh things without a throttle interrupt
drivers: cpufreq: Add missing of_node_put() in qoriq-cpufreq.c
Align refcount behaviour for amdgpu_job embedded HW fence with
classic pointer style HW fences by increasing refcount each
time emit is called so amdgpu code doesn't need to make workarounds
using amdgpu_job.job_run_counter to keep the HW fence refcount balanced.
Also since in the previous patch we resumed setting s_fence->parent to NULL
in drm_sched_stop switch to directly checking if job->hw_fence is
signaled to short circuit reset if already signed.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Tested-by: Yiqing Yao <yiqing.yao@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Problem:
This patch caused negative refcount as described in [1] because
for that case parent fence did not signal by the time of drm_sched_stop and hence
kept in pending list the assumption was they will not signal and
so fence was put to account for the s_fence->parent refcount but for
amdgpu which has embedded HW fence (always same parent fence)
drm_sched_fence_release_scheduled was always called and would
still drop the count for parent fence once more. For jobs that
never signaled this imbalance was masked by refcount bug in
amdgpu_fence_driver_clear_job_fences that would not drop
refcount on the fences that were removed from fence drive
fences array (against prevois insertion into the array in
get in amdgpu_fence_emit).
Fix:
Revert this patch and by setting s_job->s_fence->parent to NULL
as before prevent the extra refcount drop in amdgpu when
drm_sched_fence_release_scheduled is called on job release.
Also - align behaviour in drm_sched_resubmit_jobs_ext with that of
drm_sched_main when submitting jobs - take a refcount for the
new parent fence pointer and drop refcount for original kref_init
for new HW fence creation (or fake new HW fence in amdgpu - see next patch).
[1] - https://lore.kernel.org/all/731b7ff1-3cc9-e314-df2a-7c51b76d4db0@amd.com/t/#r00c728fcc069b1276642c325bfa9d82bf8fa21a3
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Tested-by: Yiqing Yao <yiqing.yao@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Problem:
After we start handling timed out jobs we assume there fences won't be
signaled but we cannot be sure and sometimes they fire late. We need
to prevent concurrent accesses to fence array from
amdgpu_fence_driver_clear_job_fences during GPU reset and amdgpu_fence_process
from a late EOP interrupt.
Fix:
Before accessing fence array in GPU disable EOP interrupt and flush
all pending interrupt handlers for amdgpu device's interrupt line.
v2: Switch from irq_get/put to full enable/disable_irq for amdgpu
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This function should drop the fence refcount when it extracts the
fence from the fence array, just as it's done in amdgpu_fence_process.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Move more stack variable in to dummy vars structure on the heap.
Fixes stack frame size errors:
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/display_mode_vba_32.c: In function 'dml32_ModeSupportAndSystemConfigurationFull':
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/display_mode_vba_32.c:3833:1: error: the frame size of 2720 bytes is larger than 2048 bytes [-Werror=frame-larger-than=]
3833 | } // ModeSupportAndSystemConfigurationFull
| ^
Fixes: dda4fb85e4 ("drm/amd/display: DML changes for DCN32/321")
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Rodrigo Siqueira Jordao <Rodrigo.Siqueira@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To pick the changes from:
2cde51f1e1 ("KVM: arm64: Hide KVM_REG_ARM_*_BMAP_BIT_COUNT from userspace")
b22216e1a6 ("KVM: arm64: Add vendor hypervisor firmware register")
428fd6788d ("KVM: arm64: Add standard hypervisor firmware register")
05714cab7d ("KVM: arm64: Setup a framework for hypercall bitmap firmware registers")
18f3976fdb ("KVM: arm64: uapi: Add kvm_debug_exit_arch.hsr_high")
a5905d6af4 ("KVM: arm64: Allow SMCCC_ARCH_WORKAROUND_3 to be discovered and migrated")
That don't causes any changes in tooling (when built on x86), only
addresses this perf build warning:
Warning: Kernel ABI header at 'tools/arch/arm64/include/uapi/asm/kvm.h' differs from latest version at 'arch/arm64/include/uapi/asm/kvm.h'
diff -u tools/arch/arm64/include/uapi/asm/kvm.h arch/arm64/include/uapi/asm/kvm.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexandru Elisei <alexandru.elisei@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: James Morse <james.morse@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Raghavendra Rao Ananta <rananta@google.com>
Link: https://lore.kernel.org/lkml/YrsWcDQyJC+xsfmm@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To act as an interrupt controller, a gpio bank relies on the
"interrupt-parent" of the pin controller.
When this optional "interrupt-parent" misses, do not create any IRQ domain.
This fixes a "NULL pointer in stm32_gpio_domain_alloc()" kernel crash when
the interrupt-parent = <exti> property is not declared in the Device Tree.
Fixes: 0eb9f68333 ("pinctrl: Add IRQ support to STM32 gpios")
Signed-off-by: Fabien Dessenne <fabien.dessenne@foss.st.com>
Link: https://lore.kernel.org/r/20220627142350.742973-1-fabien.dessenne@foss.st.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
With the change to 2 pixels/clock, the pixel doubling in the PV
results in doubling each pair of pixels, ie ABABCDCD instead of
AABBCCDD.
Move the pixel doubling to the HDMI block, however this means
that DBLCLK modes now fall foul of requiring even values for
all the horizontal timing parameters.
As both 480i and 576i fail this, attempt to fix up DBLCLK modes
that have odd timings values.
Fixes: 8323989140 ("drm/vc4: hdmi: Support the BCM2711 HDMI controllers")
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://lore.kernel.org/r/20220613144800.326124-34-maxime@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Whenever the maximum BPC is changed, vc4_hdmi_encoder_compute_config()
might pick up a different BPC or format depending on the display
capabilities.
That change will have a number of side effects, including the clock
rates and whether the scrambling is enabled.
However, only drm_crtc_state.connectors_changed will be set to true,
since that properly only affects the connector.
This means that while drm_atomic_crtc_needs_modeset() will return true,
and thus drm_atomic_helper_commit_modeset_enables() will call our
encoder atomic_enable() hook, mode_changed will be false.
So crtc_set_mode() will not call our encoder .atomic_mode_set() hook. We
use this hook in vc4 to set the vc4_hdmi_connector_state.output_bpc (and
output_format), and will then reuse the value in .atomic_enable() to select
whether or not scrambling should be enabled.
However, since our clock rate is pre-computed during .atomic_check(), we
end up with the clocks properly configured, but the scrambling disabled,
leading to a blank screen.
Let's set mode_changed to true in our HDMI driver to force the update of
output_bpc, and thus prevent the issue entirely.
Fixes: ba8c0faebb ("drm/vc4: hdmi: Enable 10/12 bpc output")
Signed-off-by: Dom Cobley <popcornmix@gmail.com>
Link: https://lore.kernel.org/r/20220613144800.326124-32-maxime@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Increase the number of post-sync blanking lines on odd fields instead of
decreasing it on even fields. This makes the total number of lines
properly match the modelines.
Additionally fix the value of PV_VCONTROL_ODD_DELAY, which did not take
pixels_per_clock into account, causing some displays to invert the
fields when driven by bcm2711.
Fixes: 682e62c454 ("drm/vc4: Fix support for interlaced modes on HDMI.")
Signed-off-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Link: https://lore.kernel.org/r/20220613144800.326124-31-maxime@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
The current HDMI driver, in vc4_hdmi_audio_can_stream() checks whether
the display output is enabled.
This has been there in one form or the other since the introduction of
the audio support in the VC4 HDMI driver in commit bb7d785688
("drm/vc4: Add HDMI audio support"), but no justification for this check
is in the commit message, or in the discussions around the patches.
One can only assume this was done to prevent a user from playing audio
on the ALSA soundcard when the monitor doesn't support it.
However, this is causing some issues. Indeed, Kodi, for example, was
hitting some errors if it was streaming audio during a modeset. With the
theory above, it does make sense, but the display and audio threads are
typically completely different processes with no opportunity to
synchronise which makes it hard to workaround.
Removing that check also doesn't seem to cause any trouble, so let's
just remove it.
Signed-off-by: Dom Cobley <popcornmix@gmail.com>
Link: https://lore.kernel.org/r/20220613144800.326124-25-maxime@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
The BCM2835-37 found in the RaspberryPi 0 to 3 have a power domain
attached to the HDMI block, handled in Linux through runtime_pm.
That power domain is shared with the VEC block, so even if we put our
runtime_pm reference in the HDMI driver it would keep being on. If the
VEC is disabled though, the power domain would be disabled and we would
lose any initialization done in our bind implementation.
That initialization involves calling the reset function and initializing
the CEC registers.
Let's move the initialization to our runtime_resume implementation so
that we initialize everything properly if we ever need to.
Fixes: c86b412143 ("drm/vc4: hdmi: Move the HSM clock enable to runtime_pm")
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://lore.kernel.org/r/20220613144800.326124-24-maxime@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
If the controller isn't clocked or its domain powered up, the register
accesses will either stall the CPU or return garbage, respectively.
Thus, we had a warning in our register access function to complain when
that kind of risky accesses were performed.
In order to check the runtime_pm power state, we were using
pm_runtime_active(), but it turns out that it will become active only
once the runtime_resume hook has been executed.
This prevents us from doing any WARN-free register access in our
runtime_resume() implementation, while this is valid.
Let's switch to pm_runtime_status_suspended() instead.
Fixes: 14e193b956 ("drm/vc4: hdmi: Warn if we access the controller while disabled")
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://lore.kernel.org/r/20220613144800.326124-23-maxime@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
The HDMI block can repeat pixels for double clocked modes,
and the firmware is now configuring the block to do this as
the PV is doing it incorrectly when at 2pixels/clock.
If the kernel doesn't reset it then we end up with strange
modes.
Reset MISC_CONTROL.
Fixes: 8323989140 ("drm/vc4: hdmi: Support the BCM2711 HDMI controllers")
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://lore.kernel.org/r/20220613144800.326124-22-maxime@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
