Commit Graph

74 Commits

Author SHA1 Message Date
Hans Verkuil
10d5509c8d [media] v4l2: remove g/s_crop from video ops
Replace all calls to g/s_crop by calls to the get/set_selection pad ops.

Remove the old g/s_crop video ops since they are now no longer used.

The cropcap video op is now only used to pass pixelaspect information,
and is only needed if the pixelaspect is not 1:1.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-08-24 09:46:09 -03:00
Wolfram Sang
e920ebc2f8 [media] soc_camera: cleanup control device on async_unbind
I got the following WARN on a simple unbind/bind cycle:

root@Lager:/sys/bus/i2c/drivers/adv7180# echo 6-0020 > unbind
root@Lager:/sys/bus/i2c/drivers/adv7180# echo 6-0020 > bind
[   31.097652] adv7180 6-0020: chip found @ 0x20 (e6520000.i2c)
[   31.123744] ------------[ cut here ]------------
[   31.128413] WARNING: CPU: 3 PID: 873 at drivers/media/platform/soc_camera/soc_camera.c:1463 soc_camera_async_bound+0x40/0xa0()
[   31.139896] CPU: 3 PID: 873 Comm: sh Not tainted 4.4.0-rc3-00062-ge8ae2c0b6bca2a #172
[   31.147815] Hardware name: Generic R8A7790 (Flattened Device Tree)
[   31.154056] Backtrace:
[   31.156575] [<c0014bc0>] (dump_backtrace) from [<c0014d80>] (show_stack+0x20/0x24)
[   31.164233]  r6:c05c5b33 r5:00000009 r4:00000000 r3:00404100
[   31.170017] [<c0014d60>] (show_stack) from [<c01e2344>] (dump_stack+0x78/0x94)
[   31.177344] [<c01e22cc>] (dump_stack) from [<c0029e7c>] (warn_slowpath_common+0x98/0xc4)
[   31.185518]  r4:00000000 r3:00000000
[   31.189172] [<c0029de4>] (warn_slowpath_common) from [<c0029fa0>] (warn_slowpath_null+0x2c/0x34)
[   31.198043]  r8:eb38df28 r7:eb38c5d0 r6:eb38de80 r5:e6962810 r4:eb38de80
[   31.204898] [<c0029f74>] (warn_slowpath_null) from [<c0356348>] (soc_camera_async_bound+0x40/0xa0)
[   31.213955] [<c0356308>] (soc_camera_async_bound) from [<c03499a0>] (v4l2_async_test_notify+0x9c/0x108)
[   31.223430]  r5:eb38c5ec r4:eb38de80
[   31.227084] [<c0349904>] (v4l2_async_test_notify) from [<c0349dd8>] (v4l2_async_register_subdev+0x88/0xd0)
[   31.236822]  r7:c07115c8 r6:c071160c r5:eb38c5ec r4:eb38de80
[   31.242622] [<c0349d50>] (v4l2_async_register_subdev) from [<c0337040>] (adv7180_probe+0x2c8/0x3a4)
[   31.251753]  r8:00000000 r7:00000001 r6:eb38de80 r5:ea973400 r4:eb38de10 r3:00000000
[   31.259660] [<c0336d78>] (adv7180_probe) from [<c032dd80>] (i2c_device_probe+0x1a0/0x1e4)

This gets fixed by clearing the control device pointer on async_unbind.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-01-25 08:54:39 -02:00
Josh Wu
3d83078a08 [media] v4l2-clk: add new definition: V4L2_CLK_NAME_SIZE
Make all v4l2-clk's clock name use V4L2_CLK_NAME_SIZE definition.

In future, if the string is increased we just need to change the
V4L2_CLK_NAME_SIZE once.

Signed-off-by: Josh Wu <josh.wu@atmel.com>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-11-17 15:19:11 -02:00
Josh Wu
ac2841f3b8 [media] v4l2-clk: add new macro for v4l2_clk_name_of()
This macro is used to generate an OF string for a v4l2 clock.

Signed-off-by: Josh Wu <josh.wu@atmel.com>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-11-17 15:18:19 -02:00
Josh Wu
af4d834727 [media] soc_camera: get the clock name by using macro: v4l2_clk_name_i2c()
Since v4l2_clk_name_i2c() is defined, reuse it.

Signed-off-by: Josh Wu <josh.wu@atmel.com>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-11-17 15:17:57 -02:00
Mauro Carvalho Chehab
d647f0b70c [media] include/media: move driver interface headers to a separate dir
Let's not mix headers used by the core with those headers that
are needed by some driver-specific interface header.

The headers used on drivers were manually moved using:
    mkdir include/media/drv-intf/
    git mv include/media/cx2341x.h include/media/cx25840.h \
	include/media/exynos-fimc.h include/media/msp3400.h \
	include/media/s3c_camif.h include/media/saa7146.h \
	include/media/saa7146_vv.h  include/media/sh_mobile_ceu.h \
	include/media/sh_mobile_csi2.h include/media/sh_vou.h \
	include/media/si476x.h include/media/soc_mediabus.h \
	include/media/tea575x.h include/media/drv-intf/

And the references for those headers were corrected using:

    MAIN_DIR="media/"
    PREV_DIR="media/"
    DIRS="drv-intf/"

    echo "Checking affected files" >&2
    for i in $DIRS; do
	for j in $(find include/$MAIN_DIR/$i -type f -name '*.h'); do
		 n=`basename $j`
		git grep -l $n
	done
    done|sort|uniq >files && (
	echo "Handling files..." >&2;
	echo "for i in \$(cat files|grep -v Documentation); do cat \$i | \\";
	(
		cd include/$MAIN_DIR;
		for j in $DIRS; do
			for i in $(ls $j); do
				echo "perl -ne 's,(include [\\\"\\<])$PREV_DIR($i)([\\\"\\>]),\1$MAIN_DIR$j\2\3,; print \$_' |\\";
			done;
		done;
		echo "cat > a && mv a \$i; done";
	);
	echo "Handling documentation..." >&2;
	echo "for i in MAINTAINERS \$(cat files); do cat \$i | \\";
	(
		cd include/$MAIN_DIR;
		for j in $DIRS; do
			for i in $(ls $j); do
				echo "  perl -ne 's,include/$PREV_DIR($i)\b,include/$MAIN_DIR$j\1,; print \$_' |\\";
			done;
		done;
		echo "cat > a && mv a \$i; done"
	);
    ) >script && . ./script

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
2015-11-17 06:57:29 -02:00
Junghak Sung
c139990e84 [media] media: videobuf2: Replace videobuf2-core with videobuf2-v4l2
Make videobuf2-v4l2 as a wrapper of videobuf2-core for v4l2-use.
And replace videobuf2-core.h with videobuf2-v4l2.h.
This renaming change should be accompanied by the modifications
of all device drivers that include videobuf2-core.h.
It can be done with just running this shell script.

replace()
{
str1=$1
str2=$2
dir=$3
for file in $(find $dir -name *.h -o -name *.c -o -name Makefile)
do
    echo $file
    sed "s/$str1/$str2/g" $file > $file.out
    mv $file.out $file
done
}

replace "videobuf2-core" "videobuf2-v4l2" "include/media/"
replace "videobuf2-core" "videobuf2-v4l2" "drivers/media/"
replace "videobuf2-core" "videobuf2-v4l2" "drivers/usb/gadget/"
replace "videobuf2-core" "videobuf2-v4l2" "drivers/staging/media/"

Signed-off-by: Junghak Sung <jh1009.sung@samsung.com>
Signed-off-by: Geunyoung Kim <nenggun.kim@samsung.com>
Acked-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Acked-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-10-01 08:48:18 -03:00
Josh Wu
3dcb8043fb [media] soc-camera: increase the length of clk_name on soc_of_bind()
Since in soc_of_bind() it may use the of node's full name as the clk_name,
and this full name may be longer than 32 characters, take at91 i2c sensor
as an example, length is 34 bytes:
   /ahb/apb/i2c@f8028000/camera@0x30

So this patch increase the clk_name[] array size to 64. It seems big
enough so far.

Signed-off-by: Josh Wu <josh.wu@atmel.com>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-09-25 17:26:27 -03:00
Hans Verkuil
16225ea7fa [media] soc_camera: always release queue for queue owner
Always release the queue if the owner closes its filehandle and not when
it is the last open filehandle.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-08-11 09:53:33 -03:00
Hans Verkuil
2d703835b0 [media] soc_camera: pass on streamoff error
If streamoff returned an error, then pass that on to the caller.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-08-11 09:53:11 -03:00
Hans Verkuil
9f317de424 [media] soc_camera: compliance fixes
- REQBUFS(0) will stop streaming, free buffers and release the file ownership.
- Return ENOTTY for create_bufs for a vb1 driver
- Return EBUSY if there is a different streaming owner and set the new owner on
  success.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-08-11 09:52:46 -03:00
Hans Verkuil
eb01b1bca9 [media] soc_camera: fix expbuf support
- For vb1 drivers just return -ENOTTY.
- For vb2 drivers allow vb2_expbuf without there being a stream owner:
  the vb2_expbuf function will return the correct error message in that case.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-08-11 09:52:16 -03:00
Hans Verkuil
d53c0f7275 [media] soc_camera: fix enum_input
Fill in the std field from the video_device tvnorms field.

This fixes a v4l2-compliance failure.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Rob Taylor <rob.taylor@codethink.co.uk>
Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-08-11 09:51:17 -03:00
Hans Verkuil
da298c6d98 [media] v4l2: replace video op g_mbus_fmt by pad op get_fmt
The g_mbus_fmt video op is a duplicate of the pad op. Replace all uses
by the get_fmt pad op and remove the video op.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: Prabhakar Lad <prabhakar.csengg@gmail.com>
Cc: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-01 08:36:17 -03:00
Hans Verkuil
ebcff5fce6 [media] v4l2: replace enum_mbus_fmt by enum_mbus_code
Replace all calls to the enum_mbus_fmt video op by the pad
enum_mbus_code op and remove the duplicate video op.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: Scott Jiang <scott.jiang.linux@gmail.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kamil Debski <k.debski@samsung.com>
Acked-by: Prabhakar Lad <prabhakar.csengg@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-01 08:33:45 -03:00
Mauro Carvalho Chehab
64131a87f2 Merge branch 'drm-next-merged' of git://people.freedesktop.org/~airlied/linux into v4l_for_linus
* 'drm-next-merged' of git://people.freedesktop.org/~airlied/linux: (9717 commits)
  media-bus: Fixup RGB444_1X12, RGB565_1X16, and YUV8_1X24 media bus format
  hexdump: avoid warning in test function
  fs: take i_mutex during prepare_binprm for set[ug]id executables
  smp: Fix error case handling in smp_call_function_*()
  iommu-common: Fix PARISC compile-time warnings
  sparc: Make LDC use common iommu poll management functions
  sparc: Make sparc64 use scalable lib/iommu-common.c functions
  Break up monolithic iommu table/lock into finer graularity pools and lock
  sparc: Revert generic IOMMU allocator.
  tools/power turbostat: correct dumped pkg-cstate-limit value
  tools/power turbostat: calculate TSC frequency from CPUID(0x15) on SKL
  tools/power turbostat: correct DRAM RAPL units on recent Xeon processors
  tools/power turbostat: Initial Skylake support
  tools/power turbostat: Use $(CURDIR) instead of $(PWD) and add support for O= option in Makefile
  tools/power turbostat: modprobe msr, if needed
  tools/power turbostat: dump MSR_TURBO_RATIO_LIMIT2
  tools/power turbostat: use new MSR_TURBO_RATIO_LIMIT names
  Bluetooth: hidp: Fix regression with older userspace and flags validation
  config: Enable NEED_DMA_MAP_STATE by default when SWIOTLB is selected
  perf/x86/intel/pt: Fix and clean up error handling in pt_event_add()
  ...

That solves several merge conflicts:
	Documentation/DocBook/media/v4l/subdev-formats.xml
	Documentation/devicetree/bindings/vendor-prefixes.txt
	drivers/staging/media/mn88473/mn88473.c
	include/linux/kconfig.h
	include/uapi/linux/media-bus-format.h

The ones at subdev-formats.xml and media-bus-format.h are not trivial.
That's why we opted to merge from DRM.
2015-04-21 09:44:55 -03:00
Mauro Carvalho Chehab
676ee36be0 Merge branch 'patchwork' into v4l_for_linus
* patchwork: (404 commits)
  [media] uvcvideo: add support for VIDIOC_QUERY_EXT_CTRL
  [media] uvcvideo: fix cropcap v4l2-compliance failure
  [media] media: omap3isp: remove unused clkdev
  [media] coda: Add tracing support
  [media] coda: drop dma_sync_single_for_device in coda_bitstream_queue
  [media] coda: fix fill bitstream errors in nonstreaming case
  [media] coda: call SEQ_END when the first queue is stopped
  [media] coda: fail to start streaming if userspace set invalid formats
  [media] coda: remove duplicate error messages for buffer allocations
  [media] coda: move parameter buffer in together with context buffer allocation
  [media] coda: allocate bitstream buffer from REQBUFS, size depends on the format
  [media] coda: allocate per-context buffers from REQBUFS
  [media] coda: use strlcpy instead of snprintf
  [media] coda: bitstream payload is unsigned
  [media] coda: fix double call to debugfs_remove
  [media] coda: check kasprintf return value in coda_open
  [media] coda: bitrate can only be set in kbps steps
  [media] v4l2-mem2mem: no need to initialize b in v4l2_m2m_next_buf and v4l2_m2m_buf_remove
  [media] s5p-mfc: set allow_zero_bytesused flag for vb2_queue_init
  [media] coda: set allow_zero_bytesused flag for vb2_queue_init
  ...
2015-04-21 06:12:35 -03:00
Linus Torvalds
7505256626 Devicetree changes for v4.1
devicetree changes queued up for v4.1. Here are the highlights:
 - Lots of unittest cleanup from Frank Rowand
 - Bugfixes and updates to the of_graph code
 - Tighten up of_get_mac_address() code
 - Documentation updates
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJVMYiQAAoJEMWQL496c2LNyrcP/2acOKeyHk7zBVWxaYe6nO52
 iwpDb+UDEdW+1Cx5e+OpF1gqoY7lJ2Q+Uvm65+z00a46Fnl0cWuSYFIV7e0wjE5/
 3EAB4cQgiCzToDnbtCu4U6XlpNlQz/q85tV9X/EpYApHNb+BKN6RMzyIDm48lzJY
 L6SG4fxFJVpeDxweZFGaWE9/Ildr4vOS+4GZpE0Az3iX2WDrQPioKjuOw8TeUHRO
 xwvfv1TpyQFa2qHZLI4AmZSN8VJBw82OuAyZHAGsE4bekfafeqVFt0ZtYYoiAbIM
 rw+dUCnWARc7gm8z2PaYnZGs8O++Flb03clDeFrdrvfZIewXWEkZ1TxrKIb9bLyP
 A8tlSnbnCdXYSzyaFYH2TgUtc7gQosssfImuJjUq1qQkeEitLP6VzEsekN1h6sx7
 axFiBdiCXPvn8ti+AlK9tYfSM0ZhAzvfpuLM0hpTAk3De3NfbJQiyp6eyXAInLne
 cs9RGPXNPuKX0tISZ29vA8tmOSrDInfeEEW/Lqu4l+HedcLssWjReY0xVsZS3pbi
 xGiD5/Ztdha9keTIQdW+7R0SE1YsZTpwZbQt0HeHcE+pzFPF/3TLIIIYhYRVSPsm
 D+g5W+bVxht8NC380UEC8vpAyP1CYSnq/aVrDfJiXZVOS7b/dyZDk6Y6LSBOm9Em
 9qLaPASncxVinaNcGlyj
 =u6Zy
 -----END PGP SIGNATURE-----

Merge tag 'devicetree-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/glikely/linux

Pull devicetree changes from Grant Likely:
 "Here are the devicetree changes queued up for v4.1.  Nothing really
  exciting here.  Rob has another few commits for big-endian attached
  UARTs, but those will be sent in a separate merge request since they
  haven't been as thoroughly tested as this batch.

  Here are the highlights:

   - lots of unittest cleanup from Frank Rowand

   - bugfixes and updates to the of_graph code

   - tighten up of_get_mac_address() code

   - documentation updates"

* tag 'devicetree-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/glikely/linux:
  of/unittest: Fix of_platform_depopulate test case
  of/unittest: early return from test skips tests
  of/unittest: breadcrumbs to reduce pain of future maintainers
  of/unittest: reduce checkpatch noise - line after declarations
  of/unittest: typo in error string
  of/unittest: add const where needed
  of_net: factor out repetitive code from of_get_mac_address()
  drivers/of: Add empty ranges quirk for PA-Semi
  of: Allow selection of OF_DYNAMIC and OF_OVERLAY if OF_UNITTEST
  of: Empty node & property flag accessors when !OF
  of: Explicitly include linux/types.h in of_graph.h
  dt-bindings: brcm: rationalize Broadcom documentation naming
  of/unittest: replace 'selftest' with 'unittest'
  Documentation: rename of_selftest.txt to of_unittest.txt
  Documentation: update the of_selftest.txt
  dt: OF_UNITTEST make dependency broken
  MAINTAINERS: Pantelis Antoniou device tree overlay maintainer
  of: Add of_graph_get_port_by_id function
  of: Add for_each_endpoint_of_node helper macro
  of: Decrement refcount of previous endpoint in of_graph_get_next_endpoint
2015-04-18 08:30:10 -04:00
Laurent Pinchart
3781760a3d [media] soc-camera: Make clock_start and clock_stop operations optional
Instead of forcing drivers to implement empty clock operations, make
them optional.

v4l2 clock registration in the soc-camera core should probably be
conditionned on the availability of those operations, but careful
review and/or testing of all drivers would be needed, so that should be
a separate step.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-04-02 18:37:19 -03:00
Laurent Pinchart
2af12f0258 [media] soc-camera: Unregister v4l2 clock in the OF bind error path
The v4l2 clock registered in soc_of_bind() must be unregistered if an
error occurs and makes the function fail.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-04-02 18:36:33 -03:00
Josh Wu
0b9508aa03 [media] media: soc-camera: use icd->control instead of icd->pdev for reset()
icd->control is the sub device dev, i.e. i2c device.
icd->pdev is the soc camera device's device.

To be consitent with power() function, we will call reset() with
icd->control as well.

Signed-off-by: Josh Wu <josh.wu@atmel.com>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-04-02 18:34:10 -03:00
Guennadi Liakhovetski
a37462b919 [media] V4L: remove clock name from v4l2_clk API
All uses of the v4l2_clk API so far only register one clock with a fixed
name. This allows us to get rid of it, which also will make CCF and DT
integration easier.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Josh Wu <josh.wu@atmel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-04-02 18:32:53 -03:00
Hans Verkuil
17bef88524 [media] v4l2-subdev: add support for the new enum_frame_interval 'which' field
Support the new 'which' field in the enum_frame_interval ops. Most drivers do not
need to be changed since they always returns the same enumeration regardless
of the 'which' field.

Tested for ov7670 and marvell-ccic on a OLPC XO-1 laptop.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-03-23 12:01:15 -07:00
Geert Uytterhoeven
8e48a2d54c [media] soc-camera: Fix devm_kfree() in soc_of_bind()
Unlike scan_async_group(), soc_of_bind() doesn't allocate its
soc_camera_async_client structure using devm_kzalloc(), but has it
embedded inside the soc_of_info structure.  Hence on failure, it must
free the whole soc_of_info structure, and not just the embedded
soc_camera_async_client structure, as the latter causes a warning, and
may cause slab corruption:

    soc-camera-pdrv soc-camera-pdrv.0: Probing soc-camera-pdrv.0
    ------------[ cut here ]------------
    WARNING: CPU: 0 PID: 1 at drivers/base/devres.c:887 devm_kfree+0x30/0x40()
    CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.19.0-shmobile-08386-g37feb0d093cb2d8e #128
    Hardware name: Generic R8A7791 (Flattened Device Tree)
    Backtrace:
    [<c0011e7c>] (dump_backtrace) from [<c0012024>] (show_stack+0x18/0x1c)
     r6:c05a923b r5:00000009 r4:00000000 r3:00204140
    [<c001200c>] (show_stack) from [<c048ed30>] (dump_stack+0x78/0x94)
    [<c048ecb8>] (dump_stack) from [<c002687c>] (warn_slowpath_common+0x8c/0xb8)
     r4:00000000 r3:00000000
    [<c00267f0>] (warn_slowpath_common) from [<c0026980>] (warn_slowpath_null+0x24/0x2c)
     r8:ee7d8214 r7:ed83b810 r6:ed83bc20 r5:fffffffa r4:ed83e510
    [<c002695c>] (warn_slowpath_null) from [<c025e0cc>] (devm_kfree+0x30/0x40)
    [<c025e09c>] (devm_kfree) from [<c032bbf4>] (soc_of_bind.isra.14+0x194/0x1d4)
    [<c032ba60>] (soc_of_bind.isra.14) from [<c032c6b8>] (soc_camera_host_register+0x208/0x31c)
     r9:00000070 r8:ee7e05d0 r7:ee153210 r6:00000000 r5:ee7e0218 r4:ed83bc20
    [<c032c4b0>] (soc_camera_host_register) from [<c032e80c>] (rcar_vin_probe+0x1f4/0x238)
     r8:ee153200 r7:00000008 r6:ee153210 r5:ed83bc10 r4:c066319c r3:000000c0
    [<c032e618>] (rcar_vin_probe) from [<c025c334>] (platform_drv_probe+0x50/0xa0)
     r10:00000000 r9:c0662fa8 r8:00000000 r7:c06a3700 r6:c0662fa8 r5:ee153210
     r4:00000000
    [<c025c2e4>] (platform_drv_probe) from [<c025af08>] (driver_probe_device+0xc4/0x208)
     r6:c06a36f4 r5:00000000 r4:ee153210 r3:c025c2e4
    [<c025ae44>] (driver_probe_device) from [<c025b108>] (__driver_attach+0x70/0x94)
     r9:c066f9c0 r8:c0624a98 r7:c065b790 r6:c0662fa8 r5:ee153244 r4:ee153210
    [<c025b098>] (__driver_attach) from [<c025984c>] (bus_for_each_dev+0x74/0x98)
     r6:c025b098 r5:c0662fa8 r4:00000000 r3:00000001
    [<c02597d8>] (bus_for_each_dev) from [<c025b1dc>] (driver_attach+0x20/0x28)
     r6:ed83c200 r5:00000000 r4:c0662fa8
    [<c025b1bc>] (driver_attach) from [<c025a00c>] (bus_add_driver+0xdc/0x1c4)
    [<c0259f30>] (bus_add_driver) from [<c025b8f4>] (driver_register+0xa4/0xe8)
     r7:c0624a98 r6:00000000 r5:c060b010 r4:c0662fa8
    [<c025b850>] (driver_register) from [<c025ccd0>] (__platform_driver_register+0x50/0x64)
     r5:c060b010 r4:ed8394c0
    [<c025cc80>] (__platform_driver_register) from [<c060b028>] (rcar_vin_driver_init+0x18/0x20)
    [<c060b010>] (rcar_vin_driver_init) from [<c05edde8>] (do_one_initcall+0x108/0x1b8)
    [<c05edce0>] (do_one_initcall) from [<c05edfb4>] (kernel_init_freeable+0x11c/0x1e4)
     r9:c066f9c0 r8:c066f9c0 r7:c062eab0 r6:c06252c4 r5:000000ad r4:00000006
    [<c05ede98>] (kernel_init_freeable) from [<c048c3d0>] (kernel_init+0x10/0xec)
     r9:00000000 r8:00000000 r7:00000000 r6:00000000 r5:c048c3c0 r4:00000000
    [<c048c3c0>] (kernel_init) from [<c000eba0>] (ret_from_fork+0x14/0x34)
     r4:00000000 r3:ee04e000
    ---[ end trace e3a984cc0335c8a0 ]---
    rcar_vin e6ef1000.video: group probe failed: -6

Fixes: 1ddc6a6caa ("[media] soc_camera: add support for dt binding soc_camera drivers")

Cc: <stable@vger.kernel.org> # 3.17+
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-03-03 10:15:48 -03:00
Philipp Zabel
f033c0bcc5 of: Decrement refcount of previous endpoint in of_graph_get_next_endpoint
Decrementing the reference count of the previous endpoint node allows to
use the of_graph_get_next_endpoint function in a for_each_... style macro.
All current users of this function that pass a non-NULL prev parameter
(that is, soc_camera and imx-drm) are changed to not decrement the passed
prev argument's refcount themselves.

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Acked-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-02-23 11:42:23 +01:00
Guennadi Liakhovetski
41bc765f1e [media] soc-camera: remove redundant code
A hunk, removing this code has been lost between versions 6 and 7 of
patch "soc-camera: add V4L2-async support." The code is harmless, but
redundant.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-02 10:40:25 -02:00
Lad, Prabhakar
976036df5e [media] soc_camera: use vb2_ops_wait_prepare/finish helper
This patch drops driver specific wait_prepare() and
wait_finish() callbacks from vb2_ops and instead uses
the the helpers vb2_ops_wait_prepare/finish() provided
by the vb2 core, the lock member of the queue needs
to be initalized to a mutex so that vb2 helpers
vb2_ops_wait_prepare/finish() can make use of it.

Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Cc: Josh Wu <josh.wu@atmel.com>
Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-02 10:40:02 -02:00
Linus Torvalds
e6b5be2be4 Driver core patches for 3.19-rc1
Here's the set of driver core patches for 3.19-rc1.
 
 They are dominated by the removal of the .owner field in platform
 drivers.  They touch a lot of files, but they are "simple" changes, just
 removing a line in a structure.
 
 Other than that, a few minor driver core and debugfs changes.  There are
 some ath9k patches coming in through this tree that have been acked by
 the wireless maintainers as they relied on the debugfs changes.
 
 Everything has been in linux-next for a while.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iEYEABECAAYFAlSOD20ACgkQMUfUDdst+ylLPACg2QrW1oHhdTMT9WI8jihlHVRM
 53kAoLeteByQ3iVwWurwwseRPiWa8+MI
 =OVRS
 -----END PGP SIGNATURE-----

Merge tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core update from Greg KH:
 "Here's the set of driver core patches for 3.19-rc1.

  They are dominated by the removal of the .owner field in platform
  drivers.  They touch a lot of files, but they are "simple" changes,
  just removing a line in a structure.

  Other than that, a few minor driver core and debugfs changes.  There
  are some ath9k patches coming in through this tree that have been
  acked by the wireless maintainers as they relied on the debugfs
  changes.

  Everything has been in linux-next for a while"

* tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (324 commits)
  Revert "ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries"
  fs: debugfs: add forward declaration for struct device type
  firmware class: Deletion of an unnecessary check before the function call "vunmap"
  firmware loader: fix hung task warning dump
  devcoredump: provide a one-way disable function
  device: Add dev_<level>_once variants
  ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries
  ath: use seq_file api for ath9k debugfs files
  debugfs: add helper function to create device related seq_file
  drivers/base: cacheinfo: remove noisy error boot message
  Revert "core: platform: add warning if driver has no owner"
  drivers: base: support cpu cache information interface to userspace via sysfs
  drivers: base: add cpu_device_create to support per-cpu devices
  topology: replace custom attribute macros with standard DEVICE_ATTR*
  cpumask: factor out show_cpumap into separate helper function
  driver core: Fix unbalanced device reference in drivers_probe
  driver core: fix race with userland in device_add()
  sysfs/kernfs: make read requests on pre-alloc files use the buffer.
  sysfs/kernfs: allow attributes to request write buffer be pre-allocated.
  fs: sysfs: return EGBIG on write if offset is larger than file size
  ...
2014-12-14 16:10:09 -08:00
Boris BREZILLON
27ffaeb0ab [media] platform: Make use of media_bus_format enum
In order to have subsytem agnostic media bus format definitions we've
moved media bus definition to include/uapi/linux/media-bus-format.h and
prefixed values with MEDIA_BUS_FMT instead of V4L2_MBUS_FMT.

Reference new definitions in all platform drivers.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Sekhar Nori <nsekhar@ti.com>
Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-14 17:54:08 -02:00
Wolfram Sang
01945a4e01 media: platform: soc_camera: drop owner assignment from platform_drivers
A platform_driver does not need to set an owner, it will be populated by the
driver core.

Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-10-20 16:20:49 +02:00
Kazunori Kobayashi
c710f591a6 [media] soc_camera: Support VIDIOC_EXPBUF ioctl
This patch allows for exporting a dmabuf descriptor from soc_camera drivers.

Signed-off-by: Kazunori Kobayashi <kkobayas@igel.co.jp>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-26 06:47:44 -03:00
Mauro Carvalho Chehab
93623c87a3 [media] soc_camera: use kmemdup()
Instead of calling kzalloc and then copying, use kmemdup(). That
avoids zeroing the data structure before copying.

Found by coccinelle.

Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-09-03 17:58:30 -03:00
Ben Dooks
1ddc6a6caa [media] soc_camera: add support for dt binding soc_camera drivers
Add initial support for OF based soc-camera devices that may be used
by any of the soc-camera drivers. The driver itself will need converting
to use OF.

These changes allow the soc-camera driver to do the connecting of any
async capable v4l2 device to the soc-camera driver. This has currently
been tested on the Renesas Lager board.

It currently only supports one input device per driver as this seems
to be the standard connection for these devices.

Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
[g.liakhovetski@gmx.de add check for multiple subdevices]
Tested-by: Robert Jarzmik <robert.jarzmik@free.fr>
Tested-by: Josh Wu <josh.wu@atmel.com>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>

Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-07-30 19:30:05 -03:00
Guennadi Liakhovetski
057c2a2ef5 [media] V4L: soc-camera: explicitly free allocated managed memory on error
devm_kzalloc() allocations are freed when the device is unbound. But if a
certain path fails and the allocated memory cannot be used anyway it is
better to free it explicitly immediately. This patch does exactly this if
asynchronous group probing in scan_async_group() fails after memory has
been allocated.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-06-17 12:04:52 -03:00
Laurent Pinchart
8774bed9ce [media] v4l: subdev: Move [gs]_std operation to video ops
The g_std and s_std operations are video-related, move them to the video
ops where they belong.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-05-24 17:11:26 -03:00
Hans Verkuil
f6cc51a9f4 [media] soc_camera: disable STD ioctls if no tvnorms are set
If the sub-device did not report any tvnorms, then disable the STD
ioctls.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-05-13 19:56:09 -03:00
Guennadi Liakhovetski
40f075330a [media] V4L2: soc-camera: work around unbalanced calls to .s_power()
Some non soc-camera drivers, e.g. em28xx, use subdevice drivers, originally
written for soc-camera, which use soc_camera_power_on() and
soc_camera_power_off() helpers to implement their .s_power() methods. Those
helpers in turn can enable and disable a clock, if it is supplied to them
as a parameter. This works well when camera host drivers balance their
calls to subdevices' .s_power() methods. However, some such drivers fail to
do that, which leads to unbalanced calls to v4l2_clk_enable() /
v4l2_clk_disable(), which then in turn produce kernel warnings. Such
behaviour is wrong and should be fixed, however, sometimes it is difficult,
because some of those drivers are rather old and use lots of subdevices,
which all should be tested after such a fix. To support such drivers this
patch adds a work-around, allowing host drivers or platforms to set a flag,
in which case soc-camera helpers will only enable the clock, if it is
disabled, and disable it only once on the first call to .s_power(0).

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-10-31 04:38:40 -02:00
Guennadi Liakhovetski
d3f884a709 [media] soc-camera: switch to using the new struct v4l2_subdev_platform_data
This prepares soc-camera to use struct v4l2_subdev_platform_data for its
subdevice-facing API, which would allow subdevice driver re-use.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-10-31 04:30:56 -02:00
Guennadi Liakhovetski
23272427cc [media] V4L2: soc-camera: fix requesting regulators in synchronous case
With synchronous subdevice probing regulators should be requested by the
soc-camera core in soc_camera_pdrv_probe(). Subdevice drivers, supporting
asynchronous probing, call soc_camera_power_init() to request regulators.
Erroneously, the same regulator array is used in the latter case as in
the former, which leads to a failure. This patch fixes it by preventing
the second regulator request from being executed.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-08-18 09:03:12 -03:00
Hans Verkuil
85e86c6e8d [media] soc_camera: fix compiler warning
media_build/v4l/soc_camera.c: In function 'soc_camera_host_register':
media_build/v4l/soc_camera.c:1513:10: warning: 'sasd' may be used uninitialized in this function [-Wmaybe-uninitialized]
  snprintf(clk_name, sizeof(clk_name), "%d-%04x",
          ^
media_build/v4l/soc_camera.c:1464:34: note: 'sasd' was declared here
  struct soc_camera_async_subdev *sasd;
                                  ^
By changing the type of 'i' to unsigned and changing a condition we finally
convince the compiler that sasd is really initialized.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-08-18 09:02:15 -03:00
Sylwester Nawrocki
e8419d0890 [media] V4L: Rename subdev field of struct v4l2_async_notifier
This is a purely cosmetic change. Since the 'subdev' member
points to an array of subdevs make it more explicit by
renaming to the plural form.
Acked-and-tested-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-07-30 15:53:11 -03:00
Sylwester Nawrocki
cfca7644d7 [media] V4L: Rename v4l2_async_bus_* to v4l2_async_match_*
enum v4l2_async_bus_type also selects a method subdevs are matched
in the notification handlers, rename it to v4l2_async_match_type
so V4L2_ASYNC_MATCH_OF entry can be further added for matching by
device tree node pointer.
Acked-and-tested-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-07-30 15:52:00 -03:00
Guennadi Liakhovetski
f687f3263e [media] V4L2: soc-camera: fix uninitialised use compiler warning
In scan_async_group() if the size parameter is negative, the sasd pointer
will be used uninitialised:
drivers/media/platform/soc_camera/soc_camera.c: In function "soc_camera_host_register":
drivers/media/platform/soc_camera/soc_camera.c:1514:55: warning: "sasd" may
be used uninitialized in this function [-Wmaybe-uninitialized]
    sasd->asd.match.i2c.adapter_id, sasd->asd.match.i2c.address);
                                                       ^
drivers/media/platform/soc_camera/soc_camera.c:1464:34: note: "sasd" was
declared here
  struct soc_camera_async_subdev *sasd;
Fix this by making "size" and the array, from which it is assigned unsigned.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-06-28 14:57:18 -03:00
Guennadi Liakhovetski
e09da11da4 [media] soc-camera: add V4L2-async support
Add support for asynchronous subdevice probing, using the v4l2-async API.
The legacy synchronous mode is still supported too, which allows to
gradually update drivers and platforms. The selected approach adds a
notifier for each struct soc_camera_device instance, i.e. for each video
device node, even when there are multiple such instances registered with a
single soc-camera host simultaneously.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-06-21 16:34:17 -03:00
Guennadi Liakhovetski
9aea470b39 [media] soc-camera: switch I2C subdevice drivers to use v4l2-clk
Instead of centrally enabling and disabling subdevice master clocks in
soc-camera core, let subdevice drivers do that themselves, using the
V4L2 clock API and soc-camera convenience wrappers.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-06-21 16:32:36 -03:00
Guennadi Liakhovetski
90438926e8 [media] soc-camera: don't attach the client to the host during probing
During client probing we only have to turn on the host's clock, no need to
actually attach the client to the host.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-06-21 15:47:10 -03:00
Guennadi Liakhovetski
a78fcc1126 [media] soc-camera: make .clock_{start,stop} compulsory, .add / .remove optional
All existing soc-camera host drivers use .clock_start() and .clock_stop()
callbacks to activate and deactivate their camera interfaces, whereas
.add() and .remove() callbacks are usually dummy. Make the former two
compulsory and the latter two optional.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-06-21 15:46:42 -03:00
Guennadi Liakhovetski
eb569cf9db [media] soc-camera: add host clock callbacks to start and stop the master clock
Currently soc-camera uses a single camera host callback to activate the
interface master clock and to configure the interface for a specific
client. However, during probing we might not have the information about
a client, we just need to activate the clock. Add new camera host driver
callbacks to only start and stop the clock without and client-specific
configuration.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-06-21 15:35:51 -03:00
Guennadi Liakhovetski
f7f6ce2d09 [media] soc-camera: move common code to soc_camera.c
All soc-camera host drivers include a pointer to an soc-camera device in
their host private struct to check, that only one client is connected.
Move this common code to soc_camera.c.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-06-21 15:35:30 -03:00
Hans Verkuil
14381c2677 [media] soc_camera: replace vdev->parent by vdev->v4l2_dev
The parent field will eventually disappear to be replaced by v4l2_dev.
soc_camera does provide a v4l2_device struct but did not point to it in
struct video_device. This is now fixed.
Now the video nodes can be found under the correct platform bus, and
the advanced debug ioctls work correctly as well (the core implementation
of those ioctls requires that v4l2_dev is set correctly).

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-06-21 11:02:24 -03:00