Pull x86 fixes from Thomas Gleixner:
"This update provides:
- prevent KASLR from randomizing EFI regions
- restrict the usage of -maccumulate-outgoing-args and document when
and why it is required.
- make the Global Physical Address calculation for UV4 systems work
correctly.
- address a copy->paste->forgot-edit problem in the MCE exception
table entries.
- assign a name to AMD MCA bank 3, so the sysfs file registration
works.
- add a missing include in the boot code"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/boot: Include missing header file
x86/mce/AMD: Give a name to MCA bank 3 when accessed with legacy MSRs
x86/build: Mostly disable '-maccumulate-outgoing-args'
x86/mm/KASLR: Exclude EFI region from KASLR VA space randomization
x86/mce: Fix copy/paste error in exception table entries
x86/platform/uv: Fix calculation of Global Physical Address
Pull scheduler fixes from Thomas Gleixner:
"This update provides:
- make the scheduler clock switch to unstable mode smooth so the
timestamps stay at microseconds granularity instead of switching to
tick granularity.
- unbreak perf test tsc by taking the new offset into account which
was added in order to proveide better sched clock continuity
- switching sched clock to unstable mode runs all clock related
computations which affect the sched clock output itself from a work
queue. In case of preemption sched clock uses half updated data and
provides wrong timestamps. Keep the math in the protected context
and delegate only the static key switch to workqueue context.
- remove a duplicate header include"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/headers: Remove duplicate #include <linux/sched/debug.h> line
sched/clock: Fix broken stable to unstable transfer
sched/clock, x86/perf: Fix "perf test tsc"
sched/clock: Fix clear_sched_clock_stable() preempt wobbly
Pull EFI fix from Thomas Gleixner:
"Downgrade the missing ESRT header printk to warning level and remove a
useless error printk which just generates noise for no value"
* 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efi/esrt: Cleanup bad memory map log messages
Pull timer fixes from Thomas Gleixner:
"Two small fixes for the new CLKEVT_OF infrastructure"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
vmlinux.lds: Add __clkevt_of_table to kernel
clockevents: Fix syntax error in clkevt-of macro
Pull irq fixes from Thomas Gleixner:
"Two small fixlets:
- select a required Kconfig to make the MVEBU driver compile
- add the missing MIPS local GIC interrupts which prevent drivers to
probe successfully"
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/mips-gic: Fix Local compare interrupt
irqchip/mvebu-odmi: Select GENERIC_MSI_IRQ_DOMAIN
Pull core fix from Thomas Gleixner:
"Prevent leaking kernel memory via /proc/$pid/syscall when the queried
task is not in a syscall"
* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
lib/syscall: Clear return values when no stack
When system bootup without get sensor property, set sensor
property will be fail.
If no get_feature operation done before set_feature, the sensor
properties will all be the initialized value, which is not the
same with sensor real properties. When set sensor property it will
write back to sensor the changed perperty data combines with other
sensor properties data, it is not right and may be dangerous.
In order to get all sensor properties, choose to read one of the sensor
properties(no matter read any sensor peroperty, driver will get all
the peroperties and return the requested one).
Fixes: 73c6768b71 ("iio: hid-sensors: Common attribute and trigger")
Signed-off-by: Song Hongyan <hongyan.song@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
When both accel_3d and gravity sensor are present, iio_device_register()
fails with "Duplicate scan index" error.
The reason for this is setting of indio_dev->num_channels based on
accel_3d channel for both gravity and accel-3d sensor. But number of
channels are not same, so for gravity it is pointing to some invalid
memory and getting scan_index to compare which may match.
To fix this issue, set the indio_dev->num_channels correctly based on
the sensor type.
Fixes: 0e377f3b9a ('iio: Add gravity sensor support')
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Fix formatting of negative values of type IIO_VAL_FRACTIONAL_LOG2 by
switching from do_div(), which can't handle negative numbers, to
div_s64_rem(). Also use shift_right for shifting, which is safe with
negative values.
Signed-off-by: Nikolaus Schulz <nikolaus.schulz@avionic-design.de>
Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
Cc: stable@vger.kernel.org
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
This patch initializes the bootime in struct st_sensor_settings for
lps22hb sensor. Without this, sensor channels read from sysfs always
report stale values.
Signed-off-by: Shrirang Bagul <shrirang.bagul@canonical.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
We need to do arithmetics after byte swapping, not before.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
The length field in the Write Zeroes command is a 16-bit field.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
In this case entirely harmless as it's all-ones, but still nice to
shut up sparse.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
The enum values for QPTYPE, PRTYPE and CMS are off by 1 from the
values defined in figure 42 of the NVM Express over Fabrics 1.0:
http://www.nvmexpress.org/wp-content/uploads/NVMe_over_Fabrics_1_0_Gold_20160605-1.pdf
Fix our enums to match the final spec.
Signed-off-by: Roland Dreier <roland@purestorage.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Guillaume Nault says:
====================
l2tp: fix usage of l2tp_session_find()
l2tp_session_find() doesn't take a reference on the session returned to
its caller. Virtually all l2tp_session_find() users are racy, either
because the session can disappear from under them or because they take
a reference too late. This leads to bugs like 'use after free' or
failure to notice duplicate session creations.
In some cases, taking a reference on the session is not enough. The
special callbacks .ref() and .deref() also have to be called in cases
where the PPP pseudo-wire uses the socket associated with the session.
Therefore, when looking up a session, we also have to pass a flag
indicating if the .ref() callback has to be called.
In the future, we probably could drop the .ref() and .deref() callbacks
entirely by protecting the .sock field of struct pppol2tp_session with
RCU, thus allowing it to be freed and set to NULL even if the L2TP
session is still alive.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Callers of l2tp_nl_session_find() need to hold a reference on the
returned session since there's no guarantee that it isn't going to
disappear from under them.
Relying on the fact that no l2tp netlink message may be processed
concurrently isn't enough: sessions can be deleted by other means
(e.g. by closing the PPPOL2TP socket of a ppp pseudowire).
l2tp_nl_cmd_session_delete() is a bit special: it runs a callback
function that may require a previous call to session->ref(). In
particular, for ppp pseudowires, the callback is l2tp_session_delete(),
which then calls pppol2tp_session_close() and dereferences the PPPOL2TP
socket. The socket might already be gone at the moment
l2tp_session_delete() calls session->ref(), so we need to take a
reference during the session lookup. So we need to pass the do_ref
variable down to l2tp_session_get() and l2tp_session_get_by_ifname().
Since all callers have to be updated, l2tp_session_find_by_ifname() and
l2tp_nl_session_find() are renamed to reflect their new behaviour.
Fixes: 309795f4be ("l2tp: Add netlink control API for L2TP")
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
l2tp_session_find() doesn't take any reference on the returned session.
Therefore, the session may disappear while sending the notification.
Use l2tp_session_get() instead and decrement session's refcount once
the notification is sent.
Fixes: 33f72e6f0c ("l2tp : multicast notification to the registered listeners")
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
l2tp_session_create() relies on its caller for checking for duplicate
sessions. This is racy since a session can be concurrently inserted
after the caller's verification.
Fix this by letting l2tp_session_create() verify sessions uniqueness
upon insertion. Callers need to be adapted to check for
l2tp_session_create()'s return code instead of calling
l2tp_session_find().
pppol2tp_connect() is a bit special because it has to work on existing
sessions (if they're not connected) or to create a new session if none
is found. When acting on a preexisting session, a reference must be
held or it could go away on us. So we have to use l2tp_session_get()
instead of l2tp_session_find() and drop the reference before exiting.
Fixes: d9e31d17ce ("l2tp: Add L2TP ethernet pseudowire support")
Fixes: fd558d186d ("l2tp: Split pppol2tp patch into separate l2tp and ppp parts")
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Holding a reference on session is required before calling
pppol2tp_session_ioctl(). The session could get freed while processing the
ioctl otherwise. Since pppol2tp_session_ioctl() uses the session's socket,
we also need to take a reference on it in l2tp_session_get().
Fixes: fd558d186d ("l2tp: Split pppol2tp patch into separate l2tp and ppp parts")
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Taking a reference on sessions in l2tp_recv_common() is racy; this
has to be done by the callers.
To this end, a new function is required (l2tp_session_get()) to
atomically lookup a session and take a reference on it. Callers then
have to manually drop this reference.
Fixes: fd558d186d ("l2tp: Split pppol2tp patch into separate l2tp and ppp parts")
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since sctp reconf was added in sctp, the real cnt of in/out stream
have not been c.sinit_max_instreams and c.sinit_num_ostreams any
more.
This patch is to replace them with stream->in/outcnt.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull parisc fixes from Helge Deller:
"Al Viro reported that - in case of read faults - our copy_from_user()
implementation may claim to have copied more bytes than it actually
did. In order to fix this bug and because of the way how gcc optimizes
register usage for inline assembly in C code, we had to replace our
pa_memcpy() function with a pure assembler implementation.
While fixing the memcpy bug we noticed some other issues with our
get_user() and put_user() functions, e.g. nested faults may return
wrong data. This is now fixed by a common fixup handler for
get_user/put_user in the exception handler which additionally makes
generated code smaller and faster.
The third patch is a trivial one-line fix for a patch which went in
during 4.11-rc and which avoids stalled CPU warnings after power
shutdown (for parisc machines which can't plug power off themselves).
Due to the rewrite of pa_memcpy() into assembly this patch got bigger
than what I wanted to have sent at this stage.
Those patches have been running in production during the last few days
on our debian build servers without any further issues"
* 'parisc-4.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Avoid stalled CPU warnings after system shutdown
parisc: Clean up fixup routines for get_user()/put_user()
parisc: Fix access fault handling in pa_memcpy()
Thirteen small fixes: The hopefully final effort to get the lpfc nvme
kconfig problems sorted, there's one important sg fix (user can induce
read after end of buffer) and one minor enhancement (adding an extra
PCI ID to qedi). The rest are a set of minor fixes, which mostly occur
as user visible in error legs or on specific devices.
Signed-off-by: James E.J. Bottomley <jejb@linux.vnet.ibm.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=umUo
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Thirteen small fixes: The hopefully final effort to get the lpfc nvme
kconfig problems sorted, there's one important sg fix (user can induce
read after end of buffer) and one minor enhancement (adding an extra
PCI ID to qedi). The rest are a set of minor fixes, which mostly occur
as user visible in error legs or on specific devices"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: remove the duplicated checking for supporting clkscaling
scsi: lpfc: fix building without debugfs support
scsi: lpfc: Fix PT2PT PRLI reject
scsi: hpsa: fix volume offline state
scsi: libsas: fix ata xfer length
scsi: scsi_dh_alua: Warn if the first argument of alua_rtpg_queue() is NULL
scsi: scsi_dh_alua: Ensure that alua_activate() calls the completion function
scsi: scsi_dh_alua: Check scsi_device_get() return value
scsi: sg: check length passed to SG_NEXT_CMD_LEN
scsi: ufshcd-platform: remove the useless cast in ERR_PTR/IS_ERR
scsi: qedi: Add PCI device-ID for QL41xxx adapters.
scsi: aacraid: Fix potential null access
scsi: qla2xxx: Fix crash in qla2xxx_eh_abort on bad ptr
Merge misc fixes from Andrew Morton:
"11 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
kasan: do not sanitize kexec purgatory
drivers/rapidio/devices/tsi721.c: make module parameter variable name unique
mm/hugetlb.c: don't call region_abort if region_chg fails
kasan: report only the first error by default
hugetlbfs: initialize shared policy as part of inode allocation
mm: fix section name for .data..ro_after_init
mm, hugetlb: use pte_present() instead of pmd_present() in follow_huge_pmd()
mm: workingset: fix premature shadow node shrinking with cgroups
mm: rmap: fix huge file mmap accounting in the memcg stats
mm: move mm_percpu_wq initialization earlier
mm: migrate: fix remove_migration_pte() for ksm pages
Daniel Borkmann says:
====================
BPF fixes on map_value_adj reg types
This set adds two fixes for map_value_adj register type in the
verifier and user space tests along with them for the BPF self
test suite. For details, please see individual patches.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a couple of test cases, for example, probing for xadd on a spilled
pointer to packet and map_value_adj register, various other map_value_adj
tests including the unaligned load/store, and trying out pointer arithmetic
on map_value_adj register itself. For the unaligned load/store, we need
to figure out whether the architecture has efficient unaligned access and
need to mark affected tests accordingly.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, the verifier doesn't reject unaligned access for map_value_adj
register types. Commit 484611357c ("bpf: allow access into map value
arrays") added logic to check_ptr_alignment() extending it from PTR_TO_PACKET
to also PTR_TO_MAP_VALUE_ADJ, but for PTR_TO_MAP_VALUE_ADJ no enforcement
is in place, because reg->id for PTR_TO_MAP_VALUE_ADJ reg types is never
non-zero, meaning, we can cause BPF_H/_W/_DW-based unaligned access for
architectures not supporting efficient unaligned access, and thus worst
case could raise exceptions on some archs that are unable to correct the
unaligned access or perform a different memory access to the actual
requested one and such.
i) Unaligned load with !CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
on r0 (map_value_adj):
0: (bf) r2 = r10
1: (07) r2 += -8
2: (7a) *(u64 *)(r2 +0) = 0
3: (18) r1 = 0x42533a00
5: (85) call bpf_map_lookup_elem#1
6: (15) if r0 == 0x0 goto pc+11
R0=map_value(ks=8,vs=48,id=0),min_value=0,max_value=0 R10=fp
7: (61) r1 = *(u32 *)(r0 +0)
8: (35) if r1 >= 0xb goto pc+9
R0=map_value(ks=8,vs=48,id=0),min_value=0,max_value=0 R1=inv,min_value=0,max_value=10 R10=fp
9: (07) r0 += 3
10: (79) r7 = *(u64 *)(r0 +0)
R0=map_value_adj(ks=8,vs=48,id=0),min_value=3,max_value=3 R1=inv,min_value=0,max_value=10 R10=fp
11: (79) r7 = *(u64 *)(r0 +2)
R0=map_value_adj(ks=8,vs=48,id=0),min_value=3,max_value=3 R1=inv,min_value=0,max_value=10 R7=inv R10=fp
[...]
ii) Unaligned store with !CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
on r0 (map_value_adj):
0: (bf) r2 = r10
1: (07) r2 += -8
2: (7a) *(u64 *)(r2 +0) = 0
3: (18) r1 = 0x4df16a00
5: (85) call bpf_map_lookup_elem#1
6: (15) if r0 == 0x0 goto pc+19
R0=map_value(ks=8,vs=48,id=0),min_value=0,max_value=0 R10=fp
7: (07) r0 += 3
8: (7a) *(u64 *)(r0 +0) = 42
R0=map_value_adj(ks=8,vs=48,id=0),min_value=3,max_value=3 R10=fp
9: (7a) *(u64 *)(r0 +2) = 43
R0=map_value_adj(ks=8,vs=48,id=0),min_value=3,max_value=3 R10=fp
10: (7a) *(u64 *)(r0 -2) = 44
R0=map_value_adj(ks=8,vs=48,id=0),min_value=3,max_value=3 R10=fp
[...]
For the PTR_TO_PACKET type, reg->id is initially zero when skb->data
was fetched, it later receives a reg->id from env->id_gen generator
once another register with UNKNOWN_VALUE type was added to it via
check_packet_ptr_add(). The purpose of this reg->id is twofold: i) it
is used in find_good_pkt_pointers() for setting the allowed access
range for regs with PTR_TO_PACKET of same id once verifier matched
on data/data_end tests, and ii) for check_ptr_alignment() to determine
that when not having efficient unaligned access and register with
UNKNOWN_VALUE was added to PTR_TO_PACKET, that we're only allowed
to access the content bytewise due to unknown unalignment. reg->id
was never intended for PTR_TO_MAP_VALUE{,_ADJ} types and thus is
always zero, the only marking is in PTR_TO_MAP_VALUE_OR_NULL that
was added after 484611357c via 57a09bf0a4 ("bpf: Detect identical
PTR_TO_MAP_VALUE_OR_NULL registers"). Above tests will fail for
non-root environment due to prohibited pointer arithmetic.
The fix splits register-type specific checks into their own helper
instead of keeping them combined, so we don't run into a similar
issue in future once we extend check_ptr_alignment() further and
forget to add reg->type checks for some of the checks.
Fixes: 484611357c ("bpf: allow access into map value arrays")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
While looking into map_value_adj, I noticed that alu operations
directly on the map_value() resp. map_value_adj() register (any
alu operation on a map_value() register will turn it into a
map_value_adj() typed register) are not sufficiently protected
against some of the operations. Two non-exhaustive examples are
provided that the verifier needs to reject:
i) BPF_AND on r0 (map_value_adj):
0: (bf) r2 = r10
1: (07) r2 += -8
2: (7a) *(u64 *)(r2 +0) = 0
3: (18) r1 = 0xbf842a00
5: (85) call bpf_map_lookup_elem#1
6: (15) if r0 == 0x0 goto pc+2
R0=map_value(ks=8,vs=48,id=0),min_value=0,max_value=0 R10=fp
7: (57) r0 &= 8
8: (7a) *(u64 *)(r0 +0) = 22
R0=map_value_adj(ks=8,vs=48,id=0),min_value=0,max_value=8 R10=fp
9: (95) exit
from 6 to 9: R0=inv,min_value=0,max_value=0 R10=fp
9: (95) exit
processed 10 insns
ii) BPF_ADD in 32 bit mode on r0 (map_value_adj):
0: (bf) r2 = r10
1: (07) r2 += -8
2: (7a) *(u64 *)(r2 +0) = 0
3: (18) r1 = 0xc24eee00
5: (85) call bpf_map_lookup_elem#1
6: (15) if r0 == 0x0 goto pc+2
R0=map_value(ks=8,vs=48,id=0),min_value=0,max_value=0 R10=fp
7: (04) (u32) r0 += (u32) 0
8: (7a) *(u64 *)(r0 +0) = 22
R0=map_value_adj(ks=8,vs=48,id=0),min_value=0,max_value=0 R10=fp
9: (95) exit
from 6 to 9: R0=inv,min_value=0,max_value=0 R10=fp
9: (95) exit
processed 10 insns
Issue is, while min_value / max_value boundaries for the access
are adjusted appropriately, we change the pointer value in a way
that cannot be sufficiently tracked anymore from its origin.
Operations like BPF_{AND,OR,DIV,MUL,etc} on a destination register
that is PTR_TO_MAP_VALUE{,_ADJ} was probably unintended, in fact,
all the test cases coming with 484611357c ("bpf: allow access
into map value arrays") perform BPF_ADD only on the destination
register that is PTR_TO_MAP_VALUE_ADJ.
Only for UNKNOWN_VALUE register types such operations make sense,
f.e. with unknown memory content fetched initially from a constant
offset from the map value memory into a register. That register is
then later tested against lower / upper bounds, so that the verifier
can then do the tracking of min_value / max_value, and properly
check once that UNKNOWN_VALUE register is added to the destination
register with type PTR_TO_MAP_VALUE{,_ADJ}. This is also what the
original use-case is solving. Note, tracking on what is being
added is done through adjust_reg_min_max_vals() and later access
to the map value enforced with these boundaries and the given offset
from the insn through check_map_access_adj().
Tests will fail for non-root environment due to prohibited pointer
arithmetic, in particular in check_alu_op(), we bail out on the
is_pointer_value() check on the dst_reg (which is false in root
case as we allow for pointer arithmetic via env->allow_ptr_leaks).
Similarly to PTR_TO_PACKET, one way to fix it is to restrict the
allowed operations on PTR_TO_MAP_VALUE{,_ADJ} registers to 64 bit
mode BPF_ADD. The test_verifier suite runs fine after the patch
and it also rejects mentioned test cases.
Fixes: 484611357c ("bpf: allow access into map value arrays")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Without this the generic cdc_ether grabs the device,
and does not really work.
Signed-off-by: René Rebe <rene@exactcode.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
ovs_flow_key_update() is called when the flow key is invalid, and it is
used to update and revalidate the flow key. Commit 329f45bc4f
("openvswitch: add mac_proto field to the flow key") introduces mac_proto
field to flow key and use it to determine whether the flow key is valid.
However, the commit does not update the code path in ovs_flow_key_update()
to revalidate the flow key which may cause BUG_ON() on execute_recirc().
This patch addresses the aforementioned issue.
Fixes: 329f45bc4f ("openvswitch: add mac_proto field to the flow key")
Signed-off-by: Yi-Hung Wei <yihung.wei@gmail.com>
Acked-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This driver uses interfaces from linux/of.h and linux/property.h but
relies on implict inclusion of those headers which means that changes in
other headers could break the build, as happened in -next for arm today.
Add a explicit includes.
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
The current code only supports DT to check SFP present.
This patch adds ACPI support as well.
Signed-off-by: Daode Huang <huangdaode@hisilicon.com>
Reviewed-by: Yisen Zhuang <yisen.zhuang@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Here are some small USB fixes for 4.11-rc5.
The usual xhci fixes are here, as well as a fix for
yet-another-bug-found-by-KASAN, those developers are doing great stuff
here. And there's a phy build warning fix that showed up in 4.11-rc1.
All of these have been in linux-next with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWN/NGw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymNQQCeNiONvY70Y99hWFDX+PL896fV1rYAoNchYIZY
V4NYSVr43W4uk7jrUQD5
=NUT1
-----END PGP SIGNATURE-----
Merge tag 'usb-4.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some small USB fixes for 4.11-rc5.
The usual xhci fixes are here, as well as a fix for yet-another-bug-
found-by-KASAN, those developers are doing great stuff here.
And there's a phy build warning fix that showed up in 4.11-rc1.
All of these have been in linux-next with no reported issues"
* tag 'usb-4.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: phy: isp1301: Fix build warning when CONFIG_OF is disabled
xhci: Manually give back cancelled URB if we can't queue it for cancel
xhci: Set URB actual length for stopped control transfers
xhci: plat: Register shutdown for xhci_plat
USB: fix linked-list corruption in rh_call_control()
Here are some small fixes for some serial drivers and Kconfig help text
for 4.11-rc5. Nothing major here at all, a few things resolving
reported bugs in some random serial drivers.
I don't think these made the last linux-next due to me getting to them
yesterday, but I am not sure, they might have snuck in. The patches
only affect drivers that the maintainers of sent me these patches for,
so we should be safe here :)
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWN/ODw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yl5cwCfaBlkq7fOavwOENjXEGCsilXUNP0Anic5NQ5D
F26b+NwYZUO2MAQjZ2MP
=pS56
-----END PGP SIGNATURE-----
Merge tag 'tty-4.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial fixes from Greg KH:
"Here are some small fixes for some serial drivers and Kconfig help
text for 4.11-rc5. Nothing major here at all, a few things resolving
reported bugs in some random serial drivers.
I don't think these made the last linux-next due to me getting to them
yesterday, but I am not sure, they might have snuck in. The patches
only affect drivers that the maintainers of sent me these patches for,
so we should be safe here :)"
* tag 'tty-4.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
tty: pl011: fix earlycon work-around for QDF2400 erratum 44
serial: 8250_EXAR: fix duplicate Kconfig text and add missing help text
tty/serial: atmel: fix TX path in atmel_console_write()
tty/serial: atmel: fix race condition (TX+DMA)
serial: mxs-auart: Fix baudrate calculation
- Drop the unconditional setting of the '-Os' gcc flag from the ACPI
Makefile to make the function graph tracer work correctly with the
ACPI subsystem (Josh Poimboeuf).
- Add missing synchronize_rcu() to ghes_remove() which removes an
element from an RCU-protected list, but fails to synchronize it
properly afterward (James Morse).
- Fix two problems related to IOAPIC hotplug, a local variable
initialization in setup_res() and the creation of platform
device objects for IO(x)APICs which are (a) unused and (b) leaked
on hot-removal (Joerg Roedel).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=dCcJ
-----END PGP SIGNATURE-----
Merge tag 'acpi-4.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These fix two issues related to IOAPIC hotplug, an overzealous build
optimization that prevents the function graph tracer from working with
the ACPI subsystem correctly and an RCU synchronization issue in the
ACPI APEI code.
Specifics:
- drop the unconditional setting of the '-Os' gcc flag from the ACPI
Makefile to make the function graph tracer work correctly with the
ACPI subsystem (Josh Poimboeuf).
- add missing synchronize_rcu() to ghes_remove() which removes an
element from an RCU-protected list, but fails to synchronize it
properly afterward (James Morse).
- fix two problems related to IOAPIC hotplug, a local variable
initialization in setup_res() and the creation of platform device
objects for IO(x)APICs which are (a) unused and (b) leaked on
hot-removal (Joerg Roedel)"
* tag 'acpi-4.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: Fix incompatibility with mcount-based function graph tracing
ACPI / APEI: Add missing synchronize_rcu() on NOTIFY_SCI removal
ACPI: Do not create a platform_device for IOAPIC/IOxAPIC
ACPI: ioapic: Clear on-stack resource before using it
- Symbolic links from CPU directories to the corresponding cpufreq
policy directories in sysfs are not created during initialization
in some cases which confuses user space, so prevent that from
happening (Rafael Wysocki).
- The powernv cpuidle driver fails to pass a correct cpumaks to
the cpuidle core in some cases which causes subsequent failures
to occur, so fix it (Vaidyanathan Srinivasan).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=MRmB
-----END PGP SIGNATURE-----
Merge tag 'pm-4.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix a cpufreq core issue with the initialization of the cpufreq
sysfs interface and a cpuidle powernv driver initialization issue.
Specifics:
- symbolic links from CPU directories to the corresponding cpufreq
policy directories in sysfs are not created during initialization
in some cases which confuses user space, so prevent that from
happening (Rafael Wysocki).
- the powernv cpuidle driver fails to pass a correct cpumaks to the
cpuidle core in some cases which causes subsequent failures to
occur, so fix it (Vaidyanathan Srinivasan)"
* tag 'pm-4.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpuidle: powernv: Pass correct drv->cpumask for registration
cpufreq: Fix creation of symbolic links to policy directories
Pull i2c fixes from Wolfram Sang:
"Two bugfixes from I2C, specifically the I2C mux section. Thanks to
peda for collecting them"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: mux: pca954x: Add missing pca9546 definition to chip_desc
Revert "i2c: mux: pca954x: Add ACPI support for pca954x"
- reading clk from driver vs. device tree [Vlad]
- Fix support for UIO in VDK platform [Alexey]
- SLC busy bit reading workaround
- build warning with kprobes header reorg
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=MIWw
-----END PGP SIGNATURE-----
Merge tag 'arc-4.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc
Pull ARC fixes from Vineet Gupta:
"Accumulated fixes for ARC which I've been been sitting on for a while:
- reading clk from driver vs device tree [Vlad]
- fix support for UIO in VDK platform [Alexey]
- SLC busy bit reading workaround
- build warning with kprobes header reorg"
* tag 'arc-4.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
ARC: fix build warnings with !CONFIG_KPROBES
ARCv2: SLC: Make sure busy bit is set properly on SLC flushing
ARC: vdk: Fix support of UIO
ARCv2: make unimplemented vectors as no-ops rather than halt core
ARC: get rate from clk driver instead of reading device tree
ARC: [dts] add cpu nodes to ARCHS SMP device tree
ARC: [dts] add input clocks for cpu nodes
backchannel; fix. Also some minor refinements to the nfsd
version-setting interface that we'd like to get fixed before release.
-----BEGIN PGP SIGNATURE-----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=oi0+
-----END PGP SIGNATURE-----
Merge tag 'nfsd-4.11-1' of git://linux-nfs.org/~bfields/linux
Pull nfsd fixes from Bruce Fields:
"The restriction of NFSv4 to TCP went overboard and also broke the
backchannel; fix.
Also some minor refinements to the nfsd version-setting interface that
we'd like to get fixed before release"
* tag 'nfsd-4.11-1' of git://linux-nfs.org/~bfields/linux:
svcrdma: set XPT_CONG_CTRL flag for bc xprt
NFSD: fix nfsd_reset_versions for NFSv4.
NFSD: fix nfsd_minorversion(.., NFSD_AVAIL)
NFSD: further refinement of content of /proc/fs/nfsd/versions
nfsd: map the ENOKEY to nfserr_perm for avoiding warning
SUNRPC/backchanel: set XPT_CONG_CTRL flag for bc xprt
The work-around for the Qualcomm Datacenter Technologies QDF2400
erratum 44 sets the "qdf2400_e44_present" global variable if the
work-around is needed. However, this check does not happen until after
earlycon is initialized, which means the work-around is not
used, and the console hangs as soon as it displays one character.
Fixes: d8a4995bce ("tty: pl011: Work around QDF2400 E44 stuck BUSY bit")
Signed-off-by: Timur Tabi <timur@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull btrfs fixes from Chris Mason:
"We have three small fixes queued up in my for-linus-4.11 branch"
* 'for-linus-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
Btrfs: fix an integer overflow check
btrfs: Change qgroup_meta_rsv to 64bit
Btrfs: bring back repair during read
kbuild test robot reported a non-static variable name collision between
a staging driver and a RapidIO driver, with a generic variable name of
'dbg_level'.
Both drivers should be changed so that they don't use this generic
public variable name. This patch fixes the RapidIO driver but does not
change the user interface (name) for the module parameter.
drivers/staging/built-in.o:(.bss+0x109d0): multiple definition of `dbg_level'
drivers/rapidio/built-in.o:(.bss+0x16c): first defined here
Link: http://lkml.kernel.org/r/ab527fc5-aa3c-4b07-5d48-eef5de703192@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Alexandre Bounine <alexandre.bounine@idt.com>
Cc: Jérémy Lefaure <jeremy.lefaure@lse.epita.fr>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Changes to hugetlbfs reservation maps is a two step process. The first
step is a call to region_chg to determine what needs to be changed, and
prepare that change. This should be followed by a call to call to
region_add to commit the change, or region_abort to abort the change.
The error path in hugetlb_reserve_pages called region_abort after a
failed call to region_chg. As a result, the adds_in_progress counter in
the reservation map is off by 1. This is caught by a VM_BUG_ON in
resv_map_release when the reservation map is freed.
syzkaller fuzzer (when using an injected kmalloc failure) found this
bug, that resulted in the following:
kernel BUG at mm/hugetlb.c:742!
Call Trace:
hugetlbfs_evict_inode+0x7b/0xa0 fs/hugetlbfs/inode.c:493
evict+0x481/0x920 fs/inode.c:553
iput_final fs/inode.c:1515 [inline]
iput+0x62b/0xa20 fs/inode.c:1542
hugetlb_file_setup+0x593/0x9f0 fs/hugetlbfs/inode.c:1306
newseg+0x422/0xd30 ipc/shm.c:575
ipcget_new ipc/util.c:285 [inline]
ipcget+0x21e/0x580 ipc/util.c:639
SYSC_shmget ipc/shm.c:673 [inline]
SyS_shmget+0x158/0x230 ipc/shm.c:657
entry_SYSCALL_64_fastpath+0x1f/0xc2
RIP: resv_map_release+0x265/0x330 mm/hugetlb.c:742
Link: http://lkml.kernel.org/r/1490821682-23228-1-git-send-email-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Disable kasan after the first report. There are several reasons for
this:
- Single bug quite often has multiple invalid memory accesses causing
storm in the dmesg.
- Write OOB access might corrupt metadata so the next report will print
bogus alloc/free stacktraces.
- Reports after the first easily could be not bugs by itself but just
side effects of the first one.
Given that multiple reports usually only do harm, it makes sense to
disable kasan after the first one. If user wants to see all the
reports, the boot-time parameter kasan_multi_shot must be used.
[aryabinin@virtuozzo.com: wrote changelog and doc, added missing include]
Link: http://lkml.kernel.org/r/20170323154416.30257-1-aryabinin@virtuozzo.com
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Any time after inode allocation, destroy_inode can be called. The
hugetlbfs inode contains a shared_policy structure, and
mpol_free_shared_policy is unconditionally called as part of
hugetlbfs_destroy_inode. Initialize the policy as part of inode
allocation so that any quick (error path) calls to destroy_inode will be
handed an initialized policy.
syzkaller fuzzer found this bug, that resulted in the following:
BUG: KASAN: user-memory-access in atomic_inc
include/asm-generic/atomic-instrumented.h:87 [inline] at addr
000000131730bd7a
BUG: KASAN: user-memory-access in __lock_acquire+0x21a/0x3a80
kernel/locking/lockdep.c:3239 at addr 000000131730bd7a
Write of size 4 by task syz-executor6/14086
CPU: 3 PID: 14086 Comm: syz-executor6 Not tainted 4.11.0-rc3+ #364
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
Call Trace:
atomic_inc include/asm-generic/atomic-instrumented.h:87 [inline]
__lock_acquire+0x21a/0x3a80 kernel/locking/lockdep.c:3239
lock_acquire+0x1ee/0x590 kernel/locking/lockdep.c:3762
__raw_write_lock include/linux/rwlock_api_smp.h:210 [inline]
_raw_write_lock+0x33/0x50 kernel/locking/spinlock.c:295
mpol_free_shared_policy+0x43/0xb0 mm/mempolicy.c:2536
hugetlbfs_destroy_inode+0xca/0x120 fs/hugetlbfs/inode.c:952
alloc_inode+0x10d/0x180 fs/inode.c:216
new_inode_pseudo+0x69/0x190 fs/inode.c:889
new_inode+0x1c/0x40 fs/inode.c:918
hugetlbfs_get_inode+0x40/0x420 fs/hugetlbfs/inode.c:734
hugetlb_file_setup+0x329/0x9f0 fs/hugetlbfs/inode.c:1282
newseg+0x422/0xd30 ipc/shm.c:575
ipcget_new ipc/util.c:285 [inline]
ipcget+0x21e/0x580 ipc/util.c:639
SYSC_shmget ipc/shm.c:673 [inline]
SyS_shmget+0x158/0x230 ipc/shm.c:657
entry_SYSCALL_64_fastpath+0x1f/0xc2
Analysis provided by Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Link: http://lkml.kernel.org/r/1490477850-7944-1-git-send-email-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
A section name for .data..ro_after_init was added by both:
commit d07a980c1b ("s390: add proper __ro_after_init support")
and
commit d7c19b066d ("mm: kmemleak: scan .data.ro_after_init")
The latter adds incorrect wrapping around the existing s390 section, and
came later. I'd prefer the s390 naming, so this moves the s390-specific
name up to the asm-generic/sections.h and renames the section as used by
kmemleak (and in the future, kernel/extable.c).
Link: http://lkml.kernel.org/r/20170327192213.GA129375@beast
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> [s390 parts]
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Cc: Eddie Kovsky <ewk@edkovsky.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
