svm_vm_migrate_from() uses sev_lock_vcpus_for_migration() to lock all
source and target vcpu->locks. Unfortunately there is an 8 subclass
limit, so a new subclass cannot be used for each vCPU. Instead maintain
ownership of the first vcpu's mutex.dep_map using a role specific
subclass: source vs target. Release the other vcpu's mutex.dep_maps.
Fixes: b56639318b ("KVM: SEV: Add support for SEV intra host migration")
Reported-by: John Sperbeck<jsperbeck@google.com>
Suggested-by: David Rientjes <rientjes@google.com>
Suggested-by: Sean Christopherson <seanjc@google.com>
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Cc: Hillf Danton <hdanton@sina.com>
Cc: kvm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Peter Gonda <pgonda@google.com>
Message-Id: <20220502165807.529624-1-pgonda@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Yes, r11 and rcx have been restored previously, but since they're being
popped anyway (into rsi) might as well pop them into their own regs --
setting them to the value they already are.
Less magical code.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220506121631.365070674@infradead.org
Since the upper regs don't exist for ia32 code, preserving them
doesn't hurt and it simplifies the code.
This doesn't add any attack surface that would not already be
available through INT80.
Notably:
- 32bit SYSENTER: didn't clear si, dx, cx.
- 32bit SYSCALL, INT80: *do* clear si since the C functions don't
take a second argument.
- 64bit: didn't clear si since the C functions take a second
argument; except the error_entry path might have only one argument,
so clearing si was missing here.
32b SYSENTER should be clearing all those 3 registers, nothing uses them
and selftests pass.
Unconditionally clear rsi since it simplifies code.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220506121631.293889636@infradead.org
Instead of playing silly games with rdi, use rax for simpler and more
consistent code.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220506121631.221072885@infradead.org
RESERVE_BRK() reserves data in the .brk_reservation section. The data
is initialized to zero, like BSS, so the macro specifies 'nobits' to
prevent the data from taking up space in the vmlinux binary. The only
way to get the compiler to do that (without putting the variable in .bss
proper) is to use inline asm.
The macro also has a hack which encloses the inline asm in a discarded
function, which allows the size to be passed (global inline asm doesn't
allow inputs).
Remove the need for the discarded function hack by just stringifying the
size rather than supplying it as an input to the inline asm.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220506121631.133110232@infradead.org
The FPU usage related to task FPU management is either protected by
disabling interrupts (switch_to, return to user) or via fpregs_lock() which
is a wrapper around local_bh_disable(). When kernel code wants to use the
FPU then it has to check whether it is possible by calling irq_fpu_usable().
But the condition in irq_fpu_usable() is wrong. It allows FPU to be used
when:
!in_interrupt() || interrupted_user_mode() || interrupted_kernel_fpu_idle()
The latter is checking whether some other context already uses FPU in the
kernel, but if that's not the case then it allows FPU to be used
unconditionally even if the calling context interrupted a fpregs_lock()
critical region. If that happens then the FPU state of the interrupted
context becomes corrupted.
Allow in kernel FPU usage only when no other context has in kernel FPU
usage and either the calling context is not hard interrupt context or the
hard interrupt did not interrupt a local bottomhalf disabled region.
It's hard to find a proper Fixes tag as the condition was broken in one way
or the other for a very long time and the eager/lazy FPU changes caused a
lot of churn. Picked something remotely connected from the history.
This survived undetected for quite some time as FPU usage in interrupt
context is rare, but the recent changes to the random code unearthed it at
least on a kernel which had FPU debugging enabled. There is probably a
higher rate of silent corruption as not all issues can be detected by the
FPU debugging code. This will be addressed in a subsequent change.
Fixes: 5d2bd7009f ("x86, fpu: decouple non-lazy/eager fpu restore from xsave")
Reported-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Borislav Petkov <bp@suse.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220501193102.588689270@linutronix.de
Clean up control_va_addr_alignment():
a. Make '=' required instead of optional (as documented).
b. Print a warning if an invalid option value is used.
c. Return 1 from the __setup handler when an invalid option value is
used. This prevents the kernel from polluting init's (limited)
environment space with the entire string.
Fixes: dfb09f9b7a ("x86, amd: Avoid cache aliasing penalties on AMD family 15h")
Reported-by: Igor Zhbanov <i.zhbanov@omprussia.ru>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/64644a2f-4a20-bab3-1e15-3b2cdd0defe3@omprussia.ru
Link: https://lore.kernel.org/r/20220315001045.7680-1-rdunlap@infradead.org
__setup() handlers should return 1 to obsolete_checksetup() in
init/main.c to indicate that the boot option has been handled. A return
of 0 causes the boot option/value to be listed as an Unknown kernel
parameter and added to init's (limited) argument (no '=') or environment
(with '=') strings. So return 1 from these x86 __setup handlers.
Examples:
Unknown kernel command line parameters "apicpmtimer
BOOT_IMAGE=/boot/bzImage-517rc8 vdso=1 ring3mwait=disable", will be
passed to user space.
Run /sbin/init as init process
with arguments:
/sbin/init
apicpmtimer
with environment:
HOME=/
TERM=linux
BOOT_IMAGE=/boot/bzImage-517rc8
vdso=1
ring3mwait=disable
Fixes: 2aae950b21 ("x86_64: Add vDSO for x86-64 with gettimeofday/clock_gettime/getcpu")
Fixes: 77b52b4c5c ("x86: add "debugpat" boot option")
Fixes: e16fd002af ("x86/cpufeature: Enable RING3MWAIT for Knights Landing")
Fixes: b8ce335906 ("x86_64: convert to clock events")
Reported-by: Igor Zhbanov <i.zhbanov@omprussia.ru>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/64644a2f-4a20-bab3-1e15-3b2cdd0defe3@omprussia.ru
Link: https://lore.kernel.org/r/20220314012725.26661-1-rdunlap@infradead.org
Raptor Lake supports the split lock detection feature. Add it to
the split_lock_cpu_ids[] array.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20220427231059.293086-1-tony.luck@intel.com
If AMD Performance Monitoring Version 2 (PerfMonV2) is
supported, use a new scheme to process Core PMC overflows
in the NMI handler using the new global control and status
registers. This will be bypassed on unsupported hardware
(x86_pmu.version < 2).
In x86_pmu_handle_irq(), overflows are detected by testing
the contents of the PERF_CTR register for each active PMC in
a loop. The new scheme instead inspects the overflow bits of
the global status register.
The Performance Counter Global Status (PerfCntrGlobalStatus)
register has overflow (PerfCntrOvfl) bits for each PMC. This
is, however, a read-only MSR. To acknowledge that overflows
have been processed, the NMI handler must clear the bits by
writing to the PerfCntrGlobalStatusClr register.
In x86_pmu_handle_irq(), PMCs counting the same event that
are started and stopped at the same time record slightly
different counts due to delays in between reads from the
PERF_CTR registers. This is fixed by stopping and starting
the PMCs at the same before and with a single write to the
Performance Counter Global Control (PerfCntrGlobalCtl) upon
entering and before exiting the NMI handler.
Signed-off-by: Sandipan Das <sandipan.das@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/f20b7e4da0b0a83bdbe05857f354146623bc63ab.1650515382.git.sandipan.das@amd.com
If AMD Performance Monitoring Version 2 (PerfMonV2) is
supported, use a new scheme to manage the Core PMCs using
the new global control and status registers. This will be
bypassed on unsupported hardware (x86_pmu.version < 2).
Currently, all PMCs have dedicated control (PERF_CTL) and
counter (PERF_CTR) registers. For a given PMC, the enable
(En) bit of its PERF_CTL register is used to start or stop
counting.
The Performance Counter Global Control (PerfCntrGlobalCtl)
register has enable (PerfCntrEn) bits for each PMC. For a
PMC to start counting, both PERF_CTL and PerfCntrGlobalCtl
enable bits must be set. If either of those are cleared,
the PMC stops counting.
In x86_pmu_{en,dis}able_all(), the PERF_CTL registers of
all active PMCs are written to in a loop. Ideally, PMCs
counting the same event that were started and stopped at
the same time should record the same counts. Due to delays
in between writes to the PERF_CTL registers across loop
iterations, the PMCs cannot be enabled or disabled at the
same instant and hence, record slightly different counts.
This is fixed by enabling or disabling all active PMCs at
the same time with a single write to the PerfCntrGlobalCtl
register.
Signed-off-by: Sandipan Das <sandipan.das@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/dfe8e934074aaabc6ba748dfaccd0a77c974bb82.1650515382.git.sandipan.das@amd.com
If AMD Performance Monitoring Version 2 (PerfMonV2) is
supported, use CPUID leaf 0x80000022 EBX to detect the
number of Core PMCs. This offers more flexibility if the
counts change in later processor families.
Signed-off-by: Sandipan Das <sandipan.das@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/68a6d9688df189267db26530378870edd34f7b06.1650515382.git.sandipan.das@amd.com
AMD Performance Monitoring Version 2 (PerfMonV2) introduces
some new Core PMU features such as detection of the number
of available PMCs and managing PMCs using global registers
namely, PerfCntrGlobalCtl and PerfCntrGlobalStatus.
Clearing PerfCntrGlobalCtl and PerfCntrGlobalStatus ensures
that all PMCs are inactive and have no pending overflows
when CPUs are onlined or offlined.
The PMU version (x86_pmu.version) now indicates PerfMonV2
support and will be used to bypass the new features on
unsupported processors.
Signed-off-by: Sandipan Das <sandipan.das@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/dc8672ecbddff394e088ca8abf94b089b8ecc2e7.1650515382.git.sandipan.das@amd.com
Add MSR definitions that will be used to enable the new AMD
Performance Monitoring Version 2 (PerfMonV2) features. These
include:
* Performance Counter Global Control (PerfCntrGlobalCtl)
* Performance Counter Global Status (PerfCntrGlobalStatus)
* Performance Counter Global Status Clear (PerfCntrGlobalStatusClr)
The new Performance Counter Global Control and Status MSRs
provide an interface for enabling or disabling multiple
counters at the same time and for testing overflow without
probing the individual registers for each PMC.
The availability of these registers is indicated through the
PerfMonV2 feature bit of CPUID leaf 0x80000022 EAX.
Signed-off-by: Sandipan Das <sandipan.das@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/cdc0d8f75bd519848731b5c64d924f5a0619a573.1650515382.git.sandipan.das@amd.com
CPUID leaf 0x80000022 i.e. ExtPerfMonAndDbg advertises some
new performance monitoring features for AMD processors.
Bit 0 of EAX indicates support for Performance Monitoring
Version 2 (PerfMonV2) features. If found to be set during
PMU initialization, the EBX bits of the same CPUID function
can be used to determine the number of available PMCs for
different PMU types. Additionally, Core PMCs can be managed
using new global control and status registers.
For better utilization of feature words, PerfMonV2 is added
as a scattered feature bit.
Signed-off-by: Sandipan Das <sandipan.das@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/c70e497e22f18e7f05b025bb64ca21cc12b17792.1650515382.git.sandipan.das@amd.com
Following Baskov Evgeniy's "Handle UEFI NX-restricted page tables"
patches, it's safe to set this compatibility flag to let loaders know
they don't need to make special accommodations for kernel to load if
pre-boot NX is enabled.
Signed-off-by: Peter Jones <pjones@redhat.com>
Link: https://lore.kernel.org/all/20220329184743.798513-1-pjones@redhat.com/
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
UEFI DXE services are not yet used in kernel code
but are required to manipulate page table memory
protection flags.
Add required declarations to use DXE services functions.
Signed-off-by: Baskov Evgeniy <baskov@ispras.ru>
Link: https://lore.kernel.org/r/20220303142120.1975-2-baskov@ispras.ru
[ardb: ignore absent DXE table but warn if the signature check fails]
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
On some x86 processors, CPUID leaf 0xA provides information
on Architectural Performance Monitoring features. It
advertises a PMU version which Qemu uses to determine the
availability of additional MSRs to manage the PMCs.
Upon receiving a KVM_GET_SUPPORTED_CPUID ioctl request for
the same, the kernel constructs return values based on the
x86_pmu_capability irrespective of the vendor.
This leaf and the additional MSRs are not supported on AMD
and Hygon processors. If AMD PerfMonV2 is detected, the PMU
version is set to 2 and guest startup breaks because of an
attempt to access a non-existent MSR. Return zeros to avoid
this.
Fixes: a6c06ed1a6 ("KVM: Expose the architectural performance monitoring CPUID leaf")
Reported-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Sandipan Das <sandipan.das@amd.com>
Message-Id: <3fef83d9c2b2f7516e8ff50d60851f29a4bcb716.1651058600.git.sandipan.das@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Zen renumbered some of the performance counters that correspond to the
well known events in perf_hw_id. This code in KVM was never updated for
that, so guest that attempt to use counters on Zen that correspond to the
pre-Zen perf_hw_id values will silently receive the wrong values.
This has been observed in the wild with rr[0] when running in Zen 3
guests. rr uses the retired conditional branch counter 00d1 which is
incorrectly recognized by KVM as PERF_COUNT_HW_STALLED_CYCLES_BACKEND.
[0] https://rr-project.org/
Signed-off-by: Kyle Huey <me@kylehuey.com>
Message-Id: <20220503050136.86298-1-khuey@kylehuey.com>
Cc: stable@vger.kernel.org
[Check guest family, not host. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We are dropping A/D bits (and W bits) in the TDP MMU. Even if mmu_lock
is held for write, as volatile SPTEs can be written by other tasks/vCPUs
outside of mmu_lock.
Attempting to prove that bug exposed another notable goof, which has been
lurking for a decade, give or take: KVM treats _all_ MMU-writable SPTEs
as volatile, even though KVM never clears WRITABLE outside of MMU lock.
As a result, the legacy MMU (and the TDP MMU if not fixed) uses XCHG to
update writable SPTEs.
The fix does not seem to have an easily-measurable affect on performance;
page faults are so slow that wasting even a few hundred cycles is dwarfed
by the base cost.
We are dropping A/D bits (and W bits) in the TDP MMU. Even if mmu_lock
is held for write, as volatile SPTEs can be written by other tasks/vCPUs
outside of mmu_lock.
Attempting to prove that bug exposed another notable goof, which has been
lurking for a decade, give or take: KVM treats _all_ MMU-writable SPTEs
as volatile, even though KVM never clears WRITABLE outside of MMU lock.
As a result, the legacy MMU (and the TDP MMU if not fixed) uses XCHG to
update writable SPTEs.
The fix does not seem to have an easily-measurable affect on performance;
page faults are so slow that wasting even a few hundred cycles is dwarfed
by the base cost.
Use an atomic XCHG to write TDP MMU SPTEs that have volatile bits, even
if mmu_lock is held for write, as volatile SPTEs can be written by other
tasks/vCPUs outside of mmu_lock. If a vCPU uses the to-be-modified SPTE
to write a page, the CPU can cache the translation as WRITABLE in the TLB
despite it being seen by KVM as !WRITABLE, and/or KVM can clobber the
Accessed/Dirty bits and not properly tag the backing page.
Exempt non-leaf SPTEs from atomic updates as KVM itself doesn't modify
non-leaf SPTEs without holding mmu_lock, they do not have Dirty bits, and
KVM doesn't consume the Accessed bit of non-leaf SPTEs.
Dropping the Dirty and/or Writable bits is most problematic for dirty
logging, as doing so can result in a missed TLB flush and eventually a
missed dirty page. In the unlikely event that the only dirty page(s) is
a clobbered SPTE, clear_dirty_gfn_range() will see the SPTE as not dirty
(based on the Dirty or Writable bit depending on the method) and so not
update the SPTE and ultimately not flush. If the SPTE is cached in the
TLB as writable before it is clobbered, the guest can continue writing
the associated page without ever taking a write-protect fault.
For most (all?) file back memory, dropping the Dirty bit is a non-issue.
The primary MMU write-protects its PTEs on writeback, i.e. KVM's dirty
bit is effectively ignored because the primary MMU will mark that page
dirty when the write-protection is lifted, e.g. when KVM faults the page
back in for write.
The Accessed bit is a complete non-issue. Aside from being unused for
non-leaf SPTEs, KVM doesn't do a TLB flush when aging SPTEs, i.e. the
Accessed bit may be dropped anyways.
Lastly, the Writable bit is also problematic as an extension of the Dirty
bit, as KVM (correctly) treats the Dirty bit as volatile iff the SPTE is
!DIRTY && WRITABLE. If KVM fixes an MMU-writable, but !WRITABLE, SPTE
out of mmu_lock, then it can allow the CPU to set the Dirty bit despite
the SPTE being !WRITABLE when it is checked by KVM. But that all depends
on the Dirty bit being problematic in the first place.
Fixes: 2f2fad0897 ("kvm: x86/mmu: Add functions to handle changed TDP SPTEs")
Cc: stable@vger.kernel.org
Cc: Ben Gardon <bgardon@google.com>
Cc: David Matlack <dmatlack@google.com>
Cc: Venkatesh Srinivas <venkateshs@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220423034752.1161007-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the is_shadow_present_pte() check out of spte_has_volatile_bits()
and into its callers. Well, caller, since only one of its two callers
doesn't already do the shadow-present check.
Opportunistically move the helper to spte.c/h so that it can be used by
the TDP MMU, which is also the primary motivation for the shadow-present
change. Unlike the legacy MMU, the TDP MMU uses a single path for clear
leaf and non-leaf SPTEs, and to avoid unnecessary atomic updates, the TDP
MMU will need to check is_last_spte() prior to calling
spte_has_volatile_bits(), and calling is_last_spte() without first
calling is_shadow_present_spte() is at best odd, and at worst a violation
of KVM's loosely defines SPTE rules.
Note, mmu_spte_clear_track_bits() could likely skip the write entirely
for SPTEs that are not shadow-present. Leave that cleanup for a future
patch to avoid introducing a functional change, and because the
shadow-present check can likely be moved further up the stack, e.g.
drop_large_spte() appears to be the only path that doesn't already
explicitly check for a shadow-present SPTE.
No functional change intended.
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220423034752.1161007-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Don't treat SPTEs that are truly writable, i.e. writable in hardware, as
being volatile (unless they're volatile for other reasons, e.g. A/D bits).
KVM _sets_ the WRITABLE bit out of mmu_lock, but never _clears_ the bit
out of mmu_lock, so if the WRITABLE bit is set, it cannot magically get
cleared just because the SPTE is MMU-writable.
Rename the wrapper of MMU-writable to be more literal, the previous name
of spte_can_locklessly_be_made_writable() is wrong and misleading.
Fixes: c7ba5b48cc ("KVM: MMU: fast path of handling guest page fault")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220423034752.1161007-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
XENPV doesn't use swapgs_restore_regs_and_return_to_usermode(),
error_entry() and the code between entry_SYSENTER_compat() and
entry_SYSENTER_compat_after_hwframe.
Change the PV-compatible SWAPGS to the ASM instruction swapgs in these
places.
Also remove the definition of SWAPGS since no more users.
Signed-off-by: Lai Jiangshan <jiangshan.ljs@antgroup.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20220503032107.680190-7-jiangshanlai@gmail.com
XENPV guests enter already on the task stack and they can't fault for
native_iret() nor native_load_gs_index() since they use their own pvop
for IRET and load_gs_index(). A CR3 switch is not needed either.
So there is no reason to call error_entry() in XENPV.
[ bp: Massage commit message. ]
Signed-off-by: Lai Jiangshan <jiangshan.ljs@antgroup.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20220503032107.680190-6-jiangshanlai@gmail.com
The macro idtentry() (through idtentry_body()) calls error_entry()
unconditionally even on XENPV. But XENPV needs to only push and clear
regs.
PUSH_AND_CLEAR_REGS in error_entry() makes the stack not return to its
original place when the function returns, which means it is not possible
to convert it to a C function.
Carve out PUSH_AND_CLEAR_REGS out of error_entry() and into a separate
function and call it before error_entry() in order to avoid calling
error_entry() on XENPV.
It will also allow for error_entry() to be converted to C code that can
use inlined sync_regs() and save a function call.
[ bp: Massage commit message. ]
Signed-off-by: Lai Jiangshan <jiangshan.ljs@antgroup.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20220503032107.680190-4-jiangshanlai@gmail.com
error_entry() calls fixup_bad_iret() before sync_regs() if it is a fault
from a bad IRET, to copy pt_regs to the kernel stack. It switches to the
kernel stack directly after sync_regs().
But error_entry() itself is also a function call, so it has to stash
the address it is going to return to, in %r12 which is unnecessarily
complicated.
Move the stack switching after error_entry() and get rid of the need to
handle the return address.
[ bp: Massage commit message. ]
Signed-off-by: Lai Jiangshan <jiangshan.ljs@antgroup.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220503032107.680190-3-jiangshanlai@gmail.com
Always stash the address error_entry() is going to return to, in %r12
and get rid of the void *error_entry_ret; slot in struct bad_iret_stack
which was supposed to account for it and pt_regs pushed on the stack.
After this, both fixup_bad_iret() and sync_regs() can work on a struct
pt_regs pointer directly.
[ bp: Rewrite commit message, touch ups. ]
Signed-off-by: Lai Jiangshan <jiangshan.ljs@antgroup.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220503032107.680190-2-jiangshanlai@gmail.com
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmJu9FYeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGAyEH/16xtJSpLmLwrQzG
o+4ToQxSQ+/9UHyu0RTEvHg2THm9/8emtIuYyc/5FgdoWctcSa3AaDcveWmuWmkS
KYcdhfJsaEqjNHS3OPYXN84fmo9Hel7263shu5+IYmP/sN0DfQp6UWTryX1q4B3Q
4Pdutkuq63Uwd8nBZ5LXQBumaBrmkkuMgWEdT4+6FOo1mPzwdIGBxCuz1UsNNl5k
chLWxkQfe2eqgWbYJrgCQfrVdORXVtoU2fGilZUNrHRVGkkldXkkz5clJfapyZD3
odmZCEbrE4GPKgZwCmDERMfD1hzhZDtYKiHfOQ506szH5ykJjPBcOjHed7dA60eB
J3+wdek=
=39Ca
-----END PGP SIGNATURE-----
Backmerge tag 'v5.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into drm-next
Linux 5.18-rc5
There was a build fix for arm I wanted in drm-next, so backmerge rather then cherry-pick.
Signed-off-by: Dave Airlie <airlied@redhat.com>
The helper function, vcpu_to_pi_desc(), is defined to get the posted
interrupt descriptor from vcpu. There is one place that doesn't use
it, and instead references vmx_vcpu->pi_desc directly. Remove the
inconsistency.
Signed-off-by: Yuan Yao <yuan.yao@intel.com>
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Message-Id: <ee7be7832bc424546fd4f05015a844a0205b5ba2.1646422845.git.isaku.yamahata@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This can cause various unexpected issues, since VM is partially
destroyed at that point.
For example when AVIC is enabled, this causes avic_vcpu_load to
access physical id page entry which is already freed by .vm_destroy.
Fixes: 8221c13700 ("svm: Manage vcpu load/unload when enable AVIC")
Cc: stable@vger.kernel.org
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20220322172449.235575-2-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In some places kvm/hyperv.c code calls bitmap_weight() to check if any bit
of a given bitmap is set. It's better to use bitmap_empty() in that case
because bitmap_empty() stops traversing the bitmap as soon as it finds
first set bit, while bitmap_weight() counts all bits unconditionally.
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Addresses: warning: Local variable 'mask' shadows outer variable
Remove extra variable declaration and switch the bit mask assignment to use
BIT_ULL() while at it.
Fixes: 522e92743b ("x86/fpu: Deduplicate copy_uabi_from_user/kernel_to_xstate()")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/lkml/202204262032.jFYKit5j-lkp@intel.com
The utilization of arch_scale_freq_tick() for CPU frequency readouts is
incomplete as it failed to move the function prototype and the define
out of the CONFIG_SMP && CONFIG_X86_64 #ifdef.
Make them unconditionally available.
Fixes: bb6e89df90 ("x86/aperfmperf: Make parts of the frequency invariance code unconditional")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/lkml/202205010106.06xRBR2C-lkp@intel.com
For the "nosmp" use case, the APIC initialization code selects
"APIC_SYMMETRIC_IO_NO_ROUTING" as the default interrupt mode and avoids
probing APIC drivers.
This works well for the default APIC modes, but for the x2APIC case the
probe function is required to allocate the cluster_hotplug mask. So in the
APIC_SYMMETRIC_IO_NO_ROUTING case when the x2APIC is initialized it
dereferences a NULL pointer and the kernel crashes.
This was observed on a TDX platform where x2APIC is enabled and "nosmp"
command line option is allowed.
To fix this issue, probe APIC drivers via default_setup_apic_routing() for
the APIC_SYMMETRIC_IO_NO_ROUTING interrupt mode too.
Suggested-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Suggested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/r/a64f864e1114bcd63593286aaf61142cfce384ea.1650076869.git.sathyanarayanan.kuppuswamy@intel.com
* Take care of faults occuring between the PARange and
IPA range by injecting an exception
* Fix S2 faults taken from a host EL0 in protected mode
* Work around Oops caused by a PMU access from a 32bit
guest when PMU has been created. This is a temporary
bodge until we fix it for good.
x86:
* Fix potential races when walking host page table
* Fix shadow page table leak when KVM runs nested
* Work around bug in userspace when KVM synthesizes leaf
0x80000021 on older (pre-EPYC) or Intel processors
Generic (but affects only RISC-V):
* Fix bad user ABI for KVM_EXIT_SYSTEM_EVENT
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmJuxI4UHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroNjfQf/X4Rn6+sTkXRS0UHWEu+q9FjJ+mIx
ZUWdbncf0brUB1RPAFfKaiQHo0t2Req+iTlpqZL0nVQ4myNUelHYube/sZdK/aBR
WOjKZE0hugGyMH3js2bsTdgzbcphThyYAX97qGZNb7tsPGhBiw7c98KhjxlieJab
D8LMNtM3uzPDxg422GfOm8ge2VbpySS5oRoGHfbD+4FiLYlXoCYfZuzlFwFFIGxw
uHm5zzfX5jshayFpFYVSJHtARXlpwJWKz9yl63QjHrhVitW4m5j4re3aNfboL6Pd
F5Z9K+DKhJLAH5cqmgiPPe2CGMvmRwKrN3F9MqV91xDPBT8J4rrowEeboQ==
=SwSU
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Take care of faults occuring between the PARange and IPA range by
injecting an exception
- Fix S2 faults taken from a host EL0 in protected mode
- Work around Oops caused by a PMU access from a 32bit guest when PMU
has been created. This is a temporary bodge until we fix it for
good.
x86:
- Fix potential races when walking host page table
- Fix shadow page table leak when KVM runs nested
- Work around bug in userspace when KVM synthesizes leaf 0x80000021
on older (pre-EPYC) or Intel processors
Generic (but affects only RISC-V):
- Fix bad user ABI for KVM_EXIT_SYSTEM_EVENT"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: work around QEMU issue with synthetic CPUID leaves
Revert "x86/mm: Introduce lookup_address_in_mm()"
KVM: x86/mmu: fix potential races when walking host page table
KVM: fix bad user ABI for KVM_EXIT_SYSTEM_EVENT
KVM: x86/mmu: Do not create SPTEs for GFNs that exceed host.MAXPHYADDR
KVM: arm64: Inject exception on out-of-IPA-range translation fault
KVM/arm64: Don't emulate a PMU for 32-bit guests if feature not set
KVM: arm64: Handle host stage-2 faults from 32-bit EL0
solely controlled by the hypervisor
- A build fix to make the function prototype (__warn()) as visible as
the definition itself
- A bunch of objtool annotation fixes which have accumulated over time
- An ORC unwinder fix to handle bad input gracefully
- Well, we thought the microcode gets loaded in time in order to restore
the microcode-emulated MSRs but we thought wrong. So there's a fix for
that to have the ordering done properly
- Add new Intel model numbers
- A spelling fix
-----BEGIN PGP SIGNATURE-----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=poyP
-----END PGP SIGNATURE-----
Merge tag 'x86_urgent_for_v5.18_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- A fix to disable PCI/MSI[-X] masking for XEN_HVM guests as that is
solely controlled by the hypervisor
- A build fix to make the function prototype (__warn()) as visible as
the definition itself
- A bunch of objtool annotation fixes which have accumulated over time
- An ORC unwinder fix to handle bad input gracefully
- Well, we thought the microcode gets loaded in time in order to
restore the microcode-emulated MSRs but we thought wrong. So there's
a fix for that to have the ordering done properly
- Add new Intel model numbers
- A spelling fix
* tag 'x86_urgent_for_v5.18_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/pci/xen: Disable PCI/MSI[-X] masking for XEN_HVM guests
bug: Have __warn() prototype defined unconditionally
x86/Kconfig: fix the spelling of 'becoming' in X86_KERNEL_IBT config
objtool: Use offstr() to print address of missing ENDBR
objtool: Print data address for "!ENDBR" data warnings
x86/xen: Add ANNOTATE_NOENDBR to startup_xen()
x86/uaccess: Add ENDBR to __put_user_nocheck*()
x86/retpoline: Add ANNOTATE_NOENDBR for retpolines
x86/static_call: Add ANNOTATE_NOENDBR to static call trampoline
objtool: Enable unreachable warnings for CLANG LTO
x86,objtool: Explicitly mark idtentry_body()s tail REACHABLE
x86,objtool: Mark cpu_startup_entry() __noreturn
x86,xen,objtool: Add UNWIND hint
lib/strn*,objtool: Enforce user_access_begin() rules
MAINTAINERS: Add x86 unwinding entry
x86/unwind/orc: Recheck address range after stack info was updated
x86/cpu: Load microcode during restore_processor_state()
x86/cpu: Add new Alderlake and Raptorlake CPU model numbers
fallthrough detection and relocation handling of weak symbols when the
toolchain strips section symbols
-----BEGIN PGP SIGNATURE-----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=7nEx
-----END PGP SIGNATURE-----
Merge tag 'objtool_urgent_for_v5.18_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool fixes from Borislav Petkov:
"A bunch of objtool fixes to improve unwinding, sibling call detection,
fallthrough detection and relocation handling of weak symbols when the
toolchain strips section symbols"
* tag 'objtool_urgent_for_v5.18_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool: Fix code relocs vs weak symbols
objtool: Fix type of reloc::addend
objtool: Fix function fallthrough detection for vmlinux
objtool: Fix sibling call detection in alternatives
objtool: Don't set 'jump_dest' for sibling calls
x86/uaccess: Don't jump between functions
csum_and_copy_from_user and csum_and_copy_to_user are exported by a few
architectures, but not actually used in modular code. Drop the exports.
Link: https://lkml.kernel.org/r/20220421070440.1282704-1-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Cc: David Miller <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Remove the read_from_oldmem() wrapper introduced earlier and convert all
the remaining callers to pass an iov_iter.
Link: https://lkml.kernel.org/r/20220408090636.560886-4-bhe@redhat.com
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Baoquan He <bhe@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Tiezhu Yang <yangtiezhu@loongson.cn>
Cc: Amit Daniel Kachhap <amit.kachhap@arm.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "Convert vmcore to use an iov_iter", v5.
For some reason several people have been sending bad patches to fix
compiler warnings in vmcore recently. Here's how it should be done.
Compile-tested only on x86. As noted in the first patch, s390 should take
this conversion a bit further, but I'm not inclined to do that work
myself.
This patch (of 3):
Instead of passing in a 'buf' and 'userbuf' argument, pass in an iov_iter.
s390 needs more work to pass the iov_iter down further, or refactor, but
I'd be more comfortable if someone who can test on s390 did that work.
It's more convenient to convert the whole of read_from_oldmem() to take an
iov_iter at the same time, so rename it to read_from_oldmem_iter() and add
a temporary read_from_oldmem() wrapper that creates an iov_iter.
Link: https://lkml.kernel.org/r/20220408090636.560886-1-bhe@redhat.com
Link: https://lkml.kernel.org/r/20220408090636.560886-2-bhe@redhat.com
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Baoquan He <bhe@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Synthesizing AMD leaves up to 0x80000021 caused problems with QEMU,
which assumes the *host* CPUID[0x80000000].EAX is higher or equal
to what KVM_GET_SUPPORTED_CPUID reports.
This causes QEMU to issue bogus host CPUIDs when preparing the input
to KVM_SET_CPUID2. It can even get into an infinite loop, which is
only terminated by an abort():
cpuid_data is full, no space for cpuid(eax:0x8000001d,ecx:0x3e)
To work around this, only synthesize those leaves if 0x8000001d exists
on the host. The synthetic 0x80000021 leaf is mostly useful on Zen2,
which satisfies the condition.
Fixes: f144c49e8c ("KVM: x86: synthesize CPUID leaf 0x80000021h if useful")
Reported-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The ftrace_[enable,disable]_ftrace_graph_caller() are used to do
special hooks for graph tracer, which are not needed on some ARCHs
that use graph_ops:func function to install return_hooker.
So introduce the weak version in ftrace core code to cleanup
in x86.
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20220420160006.17880-1-zhouchengming@bytedance.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
When shadowing 5-level NPT for 4-level NPT L1 guest, the root_sp is
allocated with role.level = 5 and the guest pagetable's root gfn.
And root_sp->spt[0] is also allocated with the same gfn and the same
role except role.level = 4. Luckily that they are different shadow
pages, but only root_sp->spt[0] is the real translation of the guest
pagetable.
Here comes a problem:
If the guest switches from gCR4_LA57=0 to gCR4_LA57=1 (or vice verse)
and uses the same gfn as the root page for nested NPT before and after
switching gCR4_LA57. The host (hCR4_LA57=1) might use the same root_sp
for the guest even the guest switches gCR4_LA57. The guest will see
unexpected page mapped and L2 may exploit the bug and hurt L1. It is
lucky that the problem can't hurt L0.
And three special cases need to be handled:
The root_sp should be like role.direct=1 sometimes: its contents are
not backed by gptes, root_sp->gfns is meaningless. (For a normal high
level sp in shadow paging, sp->gfns is often unused and kept zero, but
it could be relevant and meaningful if sp->gfns is used because they
are backed by concrete gptes.)
For such root_sp in the case, root_sp is just a portal to contribute
root_sp->spt[0], and root_sp->gfns should not be used and
root_sp->spt[0] should not be dropped if gpte[0] of the guest root
pagetable is changed.
Such root_sp should not be accounted too.
So add role.passthrough to distinguish the shadow pages in the hash
when gCR4_LA57 is toggled and fix above special cases by using it in
kvm_mmu_page_{get|set}_gfn() and sp_has_gptes().
Signed-off-by: Lai Jiangshan <jiangshan.ljs@antgroup.com>
Message-Id: <20220420131204.2850-3-jiangshanlai@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add sp_has_gptes() which equals to !sp->role.direct currently.
Shadow page having gptes needs to be write-protected, accounted and
responded to kvm_mmu_pte_write().
Use it in these places to replace !sp->role.direct and rename
for_each_gfn_indirect_valid_sp.
Signed-off-by: Lai Jiangshan <jiangshan.ljs@antgroup.com>
Message-Id: <20220420131204.2850-2-jiangshanlai@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This can help identify potential performance issues when handles
AVIC incomplete IPI due vCPU not running.
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220420154954.19305-3-suravee.suthikulpanit@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently, an AVIC-enabled VM suffers from performance bottleneck
when scaling to large number of vCPUs for I/O intensive workloads.
In such case, a vCPU often executes halt instruction to get into idle state
waiting for interrupts, in which KVM would de-schedule the vCPU from
physical CPU.
When AVIC HW tries to deliver interrupt to the halting vCPU, it would
result in AVIC incomplete IPI #vmexit to notify KVM to reschedule
the target vCPU into running state.
Investigation has shown the main hotspot is in the kvm_apic_match_dest()
in the following call stack where it tries to find target vCPUs
corresponding to the information in the ICRH/ICRL registers.
- handle_exit
- svm_invoke_exit_handler
- avic_incomplete_ipi_interception
- kvm_apic_match_dest
However, AVIC provides hints in the #vmexit info, which can be used to
retrieve the destination guest physical APIC ID.
In addition, since QEMU defines guest physical APIC ID to be the same as
vCPU ID, it can be used to quickly identify the target vCPU to deliver IPI,
and avoid the overhead from searching through all vCPUs to match the target
vCPU.
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220420154954.19305-2-suravee.suthikulpanit@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
direct_map is always equal to the direct field of the root page's role:
- for shadow paging, direct_map is true if CR0.PG=0 and root_role.direct is
copied from cpu_role.base.direct
- for TDP, it is always true and root_role.direct is also always true
- for shadow TDP, it is always false and root_role.direct is also always
false
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Remove another duplicate field of struct kvm_mmu. This time it's
the root level for page table walking; the separate field is
always initialized as cpu_role.base.level, so its users can look
up the CPU mode directly instead.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
root_role.level is always the same value as shadow_level:
- it's kvm_mmu_get_tdp_level(vcpu) when going through init_kvm_tdp_mmu
- it's the level argument when going through kvm_init_shadow_ept_mmu
- it's assigned directly from new_role.base.level when going
through shadow_mmu_init_context
Remove the duplication and get the level directly from the role.
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Do not lead init_kvm_*mmu into the temptation of poking
into struct kvm_mmu_role_regs, by passing to it directly
the CPU mode.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Shadow MMUs compute their role from cpu_role.base, simply by adjusting
the root level. It's one line of code, so do not place it in a separate
function.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Before the separation of the CPU and the MMU role, CR0.PG was not
available in the base MMU role, because two-dimensional paging always
used direct=1 in the MMU role. However, now that the raw role is
snapshotted in mmu->cpu_role, the value of CR0.PG always matches both
!cpu_role.base.direct and cpu_role.base.level > 0. There is no need to
store it again in union kvm_mmu_extended_role; instead, write an is_cr0_pg
accessor by hand that takes care of the conversion. Use cpu_role.base.level
since the future of the direct field is unclear.
Likewise, CR4.PAE is now always present in the CPU role as
!cpu_role.base.has_4_byte_gpte. The inversion makes certain tests on
the MMU role easier, and is easily hidden by the is_cr4_pae accessor
when operating on the CPU role.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It is quite confusing that the "full" union is called kvm_mmu_role
but is used for the "cpu_role" field of struct kvm_mmu. Rename it
to kvm_cpu_role.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
mmu_role represents the role of the root of the page tables.
It does not need any extended bits, as those govern only KVM's
page table walking; the is_* functions used for page table
walking always use the CPU role.
ext.valid is not present anymore in the MMU role, but an
all-zero MMU role is impossible because the level field is
never zero in the MMU role. So just zap the whole mmu_role
in order to force invalidation after CPUID is updated.
While making this change, which requires touching almost every
occurrence of "mmu_role", rename it to "root_role".
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now that the MMU role is separate from the CPU role, it can be a
truthful description of the format of the shadow pages. This includes
whether the shadow pages use the NX bit; so force the efer_nx field
of the MMU role when TDP is disabled, and remove the hardcoding it in
the callers of reset_shadow_zero_bits_mask.
In fact, the initialization of reserved SPTE bits can now be made common
to shadow paging and shadow NPT; move it to shadow_mmu_init_context.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Inline kvm_calc_mmu_role_common into its sole caller, and simplify it
by removing the computation of unnecessary bits.
Extended bits are unnecessary because page walking uses the CPU role,
and EFER.NX/CR0.WP can be set to one unconditionally---matching the
format of shadow pages rather than the format of guest pages.
The MMU role for two dimensional paging does still depend on the CPU role,
even if only barely so, due to SMM and guest mode; for consistency,
pass it down to kvm_calc_tdp_mmu_root_page_role instead of querying
the vcpu with is_smm or is_guest_mode.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
kvm_calc_shadow_root_page_role_common is the same as
kvm_calc_cpu_role except for the level, which is overwritten
afterwards in kvm_calc_shadow_mmu_root_page_role
and kvm_calc_shadow_npt_root_page_role.
role.base.direct is already set correctly for the CPU role,
and CR0.PG=1 is required for VMRUN so it will also be
correct for nested NPT.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The ept_ad field is used during page walk to determine if the guest PTEs
have accessed and dirty bits. In the MMU role, the ad_disabled
bit represents whether the *shadow* PTEs have the bits, so it
would be incorrect to replace PT_HAVE_ACCESSED_DIRTY with just
!mmu->mmu_role.base.ad_disabled.
However, the similar field in the CPU mode, ad_disabled, is initialized
correctly: to the opposite value of ept_ad for shadow EPT, and zero
for non-EPT guest paging modes (which always have A/D bits). It is
therefore possible to compute PT_HAVE_ACCESSED_DIRTY from the CPU mode,
like other page-format fields; it just has to be inverted to account
for the different polarity.
In fact, now that the CPU mode is distinct from the MMU roles, it would
even be possible to remove PT_HAVE_ACCESSED_DIRTY macro altogether, and
use !mmu->cpu_role.base.ad_disabled instead. I am not doing this because
the macro has a small effect in terms of dead code elimination:
text data bss dec hex
103544 16665 112 120321 1d601 # as of this patch
103746 16665 112 120523 1d6cb # without PT_HAVE_ACCESSED_DIRTY
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The root_level can be found in the cpu_role (in fact the field
is superfluous and could be removed, but one thing at a time).
Since there is only one usage left of role_regs_to_root_level,
inline it into kvm_calc_cpu_role.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Snapshot the state of the processor registers that govern page walk into
a new field of struct kvm_mmu. This is a more natural representation
than having it *mostly* in mmu_role but not exclusively; the delta
right now is represented in other fields, such as root_level.
The nested MMU now has only the CPU role; and in fact the new function
kvm_calc_cpu_role is analogous to the previous kvm_calc_nested_mmu_role,
except that it has role.base.direct equal to !CR0.PG. For a walk-only
MMU, "direct" has no meaning, but we set it to !CR0.PG so that
role.ext.cr0_pg can go away in a future patch.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The argument is always false now that kvm_mmu_calc_root_page_role has
been removed.
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Replace the per-vendor hack-a-fix for KVM's #PF => #PF => #DF workaround
with an explicit, common workaround in kvm_inject_emulated_page_fault().
Aside from being a hack, the current approach is brittle and incomplete,
e.g. nSVM's KVM_SET_NESTED_STATE fails to set ->inject_page_fault(),
and nVMX fails to apply the workaround when VMX is intercepting #PF due
to allow_smaller_maxphyaddr=1.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If accessed bits are not supported there simple isn't any distinction
between accessed and non-accessed gPTEs, so the comment does not make
much sense. Rephrase it in terms of what happens if accessed bits
*are* supported.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The init_kvm_*mmu functions, with the exception of shadow NPT,
do not need to know the full values of CR0/CR4/EFER; they only
need to know the bits that make up the "role". This cleanup
however will take quite a few incremental steps. As a start,
pull the common computation of the struct kvm_mmu_role_regs
into their caller: all of them extract the struct from the vcpu
as the very first step.
Reviewed-by: David Matlack <dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
struct kvm_mmu_role_regs is computed just once and then accessed. Use
const to make this clearer, even though the const fields of struct
kvm_mmu_role_regs already prevent (or make it harder...) to modify
the contents of the struct.
Reviewed-by: David Matlack <dmatlack@google.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The role.base.smm flag is always zero when setting up shadow EPT,
do not bother copying it over from vcpu->arch.root_mmu.
Reviewed-by: David Matlack <dmatlack@google.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Clear enable_mmio_caching if hardware can't support MMIO caching and use
the dedicated flag to detect if MMIO caching is enabled instead of
assuming shadow_mmio_value==0 means MMIO caching is disabled. TDX will
use a zero value even when caching is enabled, and is_mmio_spte() isn't
so hot that it needs to avoid an extra memory access, i.e. there's no
reason to be super clever. And the clever approach may not even be more
performant, e.g. gcc-11 lands the extra check on a non-zero value inline,
but puts the enable_mmio_caching out-of-line, i.e. avoids the few extra
uops for non-MMIO SPTEs.
Cc: Isaku Yamahata <isaku.yamahata@intel.com>
Cc: Kai Huang <kai.huang@intel.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220420002747.3287931-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When determining whether or not a SPTE needs to have SME/SEV's memory
encryption flag set, do the moderately expensive host MMIO pfn check if
and only if the memory encryption mask is non-zero.
Note, KVM could further optimize the host MMIO checks by making a single
call to kvm_is_mmio_pfn(), but the tdp_enabled path (for EPT's memtype
handling) will likely be split out to a separate flow[*]. At that point,
a better approach would be to shove the call to kvm_is_mmio_pfn() into
VMX code so that AMD+NPT without SME doesn't get hit with an unnecessary
lookup.
[*] https://lkml.kernel.org/r/20220321224358.1305530-3-bgardon@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220415004909.2216670-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The TSC_AUX virtualization feature allows AMD SEV-ES guests to securely use
TSC_AUX (auxiliary time stamp counter data) in the RDTSCP and RDPID
instructions. The TSC_AUX value is set using the WRMSR instruction to the
TSC_AUX MSR (0xC0000103). It is read by the RDMSR, RDTSCP and RDPID
instructions. If the read/write of the TSC_AUX MSR is intercepted, then
RDTSCP and RDPID must also be intercepted when TSC_AUX virtualization
is present. However, the RDPID instruction can't be intercepted. This means
that when TSC_AUX virtualization is present, RDTSCP and TSC_AUX MSR
read/write must not be intercepted for SEV-ES (or SEV-SNP) guests.
Signed-off-by: Babu Moger <babu.moger@amd.com>
Message-Id: <165040164424.1399644.13833277687385156344.stgit@bmoger-ubuntu>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The TSC_AUX Virtualization feature allows AMD SEV-ES guests to securely use
TSC_AUX (auxiliary time stamp counter data) MSR in RDTSCP and RDPID
instructions.
The TSC_AUX MSR is typically initialized to APIC ID or another unique
identifier so that software can quickly associate returned TSC value
with the logical processor.
Add the feature bit and also include it in the kvm for detection.
Signed-off-by: Babu Moger <babu.moger@amd.com>
Acked-by: Borislav Petkov <bp@suse.de>
Message-Id: <165040157111.1399644.6123821125319995316.stgit@bmoger-ubuntu>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fixes for (relatively) old bugs, to be merged in both the -rc and next
development trees.
The merge reconciles the ABI fixes for KVM_EXIT_SYSTEM_EVENT between
5.18 and commit c24a950ec7 ("KVM, SEV: Add KVM_EXIT_SHUTDOWN metadata
for SEV-ES", 2022-04-13).
Drop lookup_address_in_mm() now that KVM is providing it's own variant
of lookup_address_in_pgd() that is safe for use with user addresses, e.g.
guards against page tables being torn down. A variant that provides a
non-init mm is inherently dangerous and flawed, as the only reason to use
an mm other than init_mm is to walk a userspace mapping, and
lookup_address_in_pgd() does not play nice with userspace mappings, e.g.
doesn't disable IRQs to block TLB shootdowns and doesn't use READ_ONCE()
to ensure an upper level entry isn't converted to a huge page between
checking the PAGE_SIZE bit and grabbing the address of the next level
down.
This reverts commit 13c72c060f.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <YmwIi3bXr/1yhYV/@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fixes for (relatively) old bugs, to be merged in both the -rc and next
development trees:
* Fix potential races when walking host page table
* Fix bad user ABI for KVM_EXIT_SYSTEM_EVENT
* Fix shadow page table leak when KVM runs nested
KVM uses lookup_address_in_mm() to detect the hugepage size that the host
uses to map a pfn. The function suffers from several issues:
- no usage of READ_ONCE(*). This allows multiple dereference of the same
page table entry. The TOCTOU problem because of that may cause KVM to
incorrectly treat a newly generated leaf entry as a nonleaf one, and
dereference the content by using its pfn value.
- the information returned does not match what KVM needs; for non-present
entries it returns the level at which the walk was terminated, as long
as the entry is not 'none'. KVM needs level information of only 'present'
entries, otherwise it may regard a non-present PXE entry as a present
large page mapping.
- the function is not safe for mappings that can be torn down, because it
does not disable IRQs and because it returns a PTE pointer which is never
safe to dereference after the function returns.
So implement the logic for walking host page tables directly in KVM, and
stop using lookup_address_in_mm().
Cc: Sean Christopherson <seanjc@google.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Mingwei Zhang <mizhang@google.com>
Message-Id: <20220429031757.2042406-1-mizhang@google.com>
[Inline in host_pfn_mapping_level, ensure no semantic change for its
callers. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When KVM_EXIT_SYSTEM_EVENT was introduced, it included a flags
member that at the time was unused. Unfortunately this extensibility
mechanism has several issues:
- x86 is not writing the member, so it would not be possible to use it
on x86 except for new events
- the member is not aligned to 64 bits, so the definition of the
uAPI struct is incorrect for 32- on 64-bit userspace. This is a
problem for RISC-V, which supports CONFIG_KVM_COMPAT, but fortunately
usage of flags was only introduced in 5.18.
Since padding has to be introduced, place a new field in there
that tells if the flags field is valid. To allow further extensibility,
in fact, change flags to an array of 16 values, and store how many
of the values are valid. The availability of the new ndata field
is tied to a system capability; all architectures are changed to
fill in the field.
To avoid breaking compilation of userspace that was using the flags
field, provide a userspace-only union to overlap flags with data[0].
The new field is placed at the same offset for both 32- and 64-bit
userspace.
Cc: Will Deacon <will@kernel.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Peter Gonda <pgonda@google.com>
Cc: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reported-by: kernel test robot <lkp@intel.com>
Message-Id: <20220422103013.34832-1-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Disallow memslots and MMIO SPTEs whose gpa range would exceed the host's
MAXPHYADDR, i.e. don't create SPTEs for gfns that exceed host.MAXPHYADDR.
The TDP MMU bounds its zapping based on host.MAXPHYADDR, and so if the
guest, possibly with help from userspace, manages to coerce KVM into
creating a SPTE for an "impossible" gfn, KVM will leak the associated
shadow pages (page tables):
WARNING: CPU: 10 PID: 1122 at arch/x86/kvm/mmu/tdp_mmu.c:57
kvm_mmu_uninit_tdp_mmu+0x4b/0x60 [kvm]
Modules linked in: kvm_intel kvm irqbypass
CPU: 10 PID: 1122 Comm: set_memory_regi Tainted: G W 5.18.0-rc1+ #293
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
RIP: 0010:kvm_mmu_uninit_tdp_mmu+0x4b/0x60 [kvm]
Call Trace:
<TASK>
kvm_arch_destroy_vm+0x130/0x1b0 [kvm]
kvm_destroy_vm+0x162/0x2d0 [kvm]
kvm_vm_release+0x1d/0x30 [kvm]
__fput+0x82/0x240
task_work_run+0x5b/0x90
exit_to_user_mode_prepare+0xd2/0xe0
syscall_exit_to_user_mode+0x1d/0x40
entry_SYSCALL_64_after_hwframe+0x44/0xae
</TASK>
On bare metal, encountering an impossible gpa in the page fault path is
well and truly impossible, barring CPU bugs, as the CPU will signal #PF
during the gva=>gpa translation (or a similar failure when stuffing a
physical address into e.g. the VMCS/VMCB). But if KVM is running as a VM
itself, the MAXPHYADDR enumerated to KVM may not be the actual MAXPHYADDR
of the underlying hardware, in which case the hardware will not fault on
the illegal-from-KVM's-perspective gpa.
Alternatively, KVM could continue allowing the dodgy behavior and simply
zap the max possible range. But, for hosts with MAXPHYADDR < 52, that's
a (minor) waste of cycles, and more importantly, KVM can't reasonably
support impossible memslots when running on bare metal (or with an
accurate MAXPHYADDR as a VM). Note, limiting the overhead by checking if
KVM is running as a guest is not a safe option as the host isn't required
to announce itself to the guest in any way, e.g. doesn't need to set the
HYPERVISOR CPUID bit.
A second alternative to disallowing the memslot behavior would be to
disallow creating a VM with guest.MAXPHYADDR > host.MAXPHYADDR. That
restriction is undesirable as there are legitimate use cases for doing
so, e.g. using the highest host.MAXPHYADDR out of a pool of heterogeneous
systems so that VMs can be migrated between hosts with different
MAXPHYADDRs without running afoul of the allow_smaller_maxphyaddr mess.
Note that any guest.MAXPHYADDR is valid with shadow paging, and it is
even useful in order to test KVM with MAXPHYADDR=52 (i.e. without
any reserved physical address bits).
The now common kvm_mmu_max_gfn() is inclusive instead of exclusive.
The memslot and TDP MMU code want an exclusive value, but the name
implies the returned value is inclusive, and the MMIO path needs an
inclusive check.
Fixes: faaf05b00a ("kvm: x86/mmu: Support zapping SPTEs in the TDP MMU")
Fixes: 524a1e4e38 ("KVM: x86/mmu: Don't leak non-leaf SPTEs when zapping all SPTEs")
Cc: stable@vger.kernel.org
Cc: Maxim Levitsky <mlevitsk@redhat.com>
Cc: Ben Gardon <bgardon@google.com>
Cc: David Matlack <dmatlack@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220428233416.2446833-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When a XEN_HVM guest uses the XEN PIRQ/Eventchannel mechanism, then
PCI/MSI[-X] masking is solely controlled by the hypervisor, but contrary to
XEN_PV guests this does not disable PCI/MSI[-X] masking in the PCI/MSI
layer.
This can lead to a situation where the PCI/MSI layer masks an MSI[-X]
interrupt and the hypervisor grants the write despite the fact that it
already requested the interrupt. As a consequence interrupt delivery on the
affected device is not happening ever.
Set pci_msi_ignore_mask to prevent that like it's done for XEN_PV guests
already.
Fixes: 809f9267bb ("xen: map MSIs into pirqs")
Reported-by: Jeremi Piotrowski <jpiotrowski@linux.microsoft.com>
Reported-by: Dusty Mabe <dustymabe@redhat.com>
Reported-by: Salvatore Bonaccorso <carnil@debian.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Noah Meyerhans <noahm@debian.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/87tuaduxj5.ffs@tglx
The word of "free" is not expressive enough to express the feature of
optimizing vmemmap pages associated with each HugeTLB, rename this keywork
to "optimize". In this patch , cheanup configs to make code more
expressive.
Link: https://lkml.kernel.org/r/20220404074652.68024-4-songmuchun@bytedance.com
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This defines and exports a platform specific custom vm_get_page_prot() via
subscribing ARCH_HAS_VM_GET_PAGE_PROT. This also unsubscribes from config
ARCH_HAS_FILTER_PGPROT, after dropping off arch_filter_pgprot() and
arch_vm_get_page_prot().
Link: https://lkml.kernel.org/r/20220414062125.609297-6-anshuman.khandual@arm.com
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: David S. Miller <davem@davemloft.net>
Cc: Khalid Aziz <khalid.aziz@oracle.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The feature of minimizing overhead of struct page associated with each
HugeTLB page is implemented on x86_64, however, the infrastructure of this
feature is already there, we could easily enable it for other
architectures. Introduce ARCH_WANT_HUGETLB_PAGE_FREE_VMEMMAP for other
architectures to be easily enabled. Just select this config if they want
to enable this feature.
Link: https://lkml.kernel.org/r/20220331065640.5777-1-songmuchun@bytedance.com
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Suggested-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Barry Song <baohua@kernel.org>
Tested-by: Barry Song <baohua@kernel.org>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Bodeddula Balasubramaniam <bodeddub@amazon.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Fam Zheng <fam.zheng@bytedance.com>
Cc: James Morse <james.morse@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Will Deacon <will@kernel.org>
Cc: Xiongchun Duan <duanxiongchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
HSMP protocol version 5 is supported on AMD family 19h model 10h
EPYC processors. This version brings new features such as
-- DIMM statistics
-- Bandwidth for IO and xGMI links
-- Monitor socket and core frequency limits
-- Configure power efficiency modes, DF pstate range etc
Signed-off-by: Suma Hegde <suma.hegde@amd.com>
Reviewed-by: Carlos Bilbao <carlos.bilbao@amd.com>
Signed-off-by: Naveen Krishna Chatradhi <nchatrad@amd.com>
Link: https://lore.kernel.org/r/20220427152248.25643-1-nchatrad@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Due to the avoidance of IPIs to idle CPUs arch_freq_get_on_cpu() can return
0 when the last sample was too long ago.
show_cpuinfo() has a fallback to cpufreq_quick_get() and if that fails to
return cpu_khz, but the readout code for the per CPU scaling frequency in
sysfs does not.
Move that fallback into arch_freq_get_on_cpu() so the behaviour is the same
when reading /proc/cpuinfo and /sys/..../cur_scaling_freq.
Suggested-by: "Rafael J. Wysocki" <rafael@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Doug Smythies <dsmythies@telus.net>
Link: https://lore.kernel.org/r/87pml5180p.ffs@tglx
Reading the current CPU frequency from /sys/..../scaling_cur_freq involves
in the worst case two IPIs due to the ad hoc sampling.
The frequency invariance infrastructure provides the APERF/MPERF samples
already. Utilize them and consolidate this with the /proc/cpuinfo readout.
The sample is considered valid for 20ms. So for idle or isolated NOHZ full
CPUs the function returns 0, which is matching the previous behaviour.
The resulting text size vs. the original APERF/MPERF plus the separate
frequency invariance code:
text: 2411 -> 723
init.text: 0 -> 767
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Link: https://lore.kernel.org/r/20220415161206.934040006@linutronix.de
The frequency invariance infrastructure provides the APERF/MPERF samples
already. Utilize them for the cpu frequency display in /proc/cpuinfo.
The sample is considered valid for 20ms. So for idle or isolated NOHZ full
CPUs the function returns 0, which is matching the previous behaviour.
This gets rid of the mass IPIs and a delay of 20ms for stabilizing observed
by Eric when reading /proc/cpuinfo.
Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Link: https://lore.kernel.org/r/20220415161206.875029458@linutronix.de
Now that the MSR readout is unconditional, store the results in the per CPU
data structure along with a jiffies timestamp for the CPU frequency readout
code.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Link: https://lore.kernel.org/r/20220415161206.817702355@linutronix.de
The frequency invariance support is currently limited to x86/64 and SMP,
which is the vast majority of machines.
arch_scale_freq_tick() is called every tick on all CPUs and reads the APERF
and MPERF MSRs. The CPU frequency getters function do the same via dedicated
IPIs.
While it could be argued that on systems where frequency invariance support
is disabled (32bit, !SMP) the per tick read of the APERF and MPERF MSRs can
be avoided, it does not make sense to keep the extra code and the resulting
runtime issues of mass IPIs around.
As a first step split out the non frequency invariance specific
initialization code and the read MSR portion of arch_scale_freq_tick(). The
rest of the code is still conditional and guarded with a static key.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Link: https://lore.kernel.org/r/20220415161206.761988704@linutronix.de
Preparation for sharing code with the CPU frequency portion of the
aperf/mperf code.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Link: https://lore.kernel.org/r/20220415161206.706185092@linutronix.de
Preparation for sharing code with the CPU frequency portion of the
aperf/mperf code.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Link: https://lore.kernel.org/r/20220415161206.648485667@linutronix.de
AMD boot CPU initialization happens late via ACPI/CPPC which prevents the
Intel parts from being marked __init.
Split out the common code and provide a dedicated interface for the AMD
initialization and mark the Intel specific code and data __init.
The remaining text size is almost cut in half:
text: 2614 -> 1350
init.text: 0 -> 786
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Link: https://lore.kernel.org/r/20220415161206.592465719@linutronix.de
This code is convoluted and because it can be invoked post init via the
ACPI/CPPC code, all of the initialization functionality is built in instead
of being part of init text and init data.
As a first step create separate calls for the boot and the application
processors.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Link: https://lore.kernel.org/r/20220415161206.536733494@linutronix.de
as this can share code with the preexisting APERF/MPERF code.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Link: https://lore.kernel.org/r/20220415161206.478362457@linutronix.de
aperfmperf_get_khz() already excludes idle CPUs from APERF/MPERF sampling
and that's a reasonable decision. There is no point in sending up to two
IPIs to an idle CPU just because someone reads a sysfs file.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Link: https://lore.kernel.org/r/20220415161206.419880163@linutronix.de
Changes to the "warn" mode of split lock handling mean that TIF_SLD is
never set.
Remove the bit, and the functions that use it.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20220310204854.31752-3-tony.luck@intel.com
In https://lore.kernel.org/all/87y22uujkm.ffs@tglx/ Thomas
said:
Its's simply wishful thinking that stuff gets fixed because of a
WARN_ONCE(). This has never worked. The only thing which works is to
make stuff fail hard or slow it down in a way which makes it annoying
enough to users to complain.
He was talking about WBINVD. But it made me think about how we use the
split lock detection feature in Linux.
Existing code has three options for applications:
1) Don't enable split lock detection (allow arbitrary split locks)
2) Warn once when a process uses split lock, but let the process
keep running with split lock detection disabled
3) Kill process that use split locks
Option 2 falls into the "wishful thinking" territory that Thomas warns does
nothing. But option 3 might not be viable in a situation with legacy
applications that need to run.
Hence make option 2 much stricter to "slow it down in a way which makes
it annoying".
Primary reason for this change is to provide better quality of service to
the rest of the applications running on the system. Internal testing shows
that even with many processes splitting locks, performance for the rest of
the system is much more responsive.
The new "warn" mode operates like this. When an application tries to
execute a bus lock the #AC handler.
1) Delays (interruptibly) 10 ms before moving to next step.
2) Blocks (interruptibly) until it can get the semaphore
If interrupted, just return. Assume the signal will either
kill the task, or direct execution away from the instruction
that is trying to get the bus lock.
3) Disables split lock detection for the current core
4) Schedules a work queue to re-enable split lock detect in 2 jiffies
5) Returns
The work queue that re-enables split lock detection also releases the
semaphore.
There is a corner case where a CPU may be taken offline while split lock
detection is disabled. A CPU hotplug handler handles this case.
Old behaviour was to only print the split lock warning on the first
occurrence of a split lock from a task. Preserve that by adding a flag to
the task structure that suppresses subsequent split lock messages from that
task.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20220310204854.31752-2-tony.luck@intel.com
Since
e2a1256b17 ("x86/speculation: Restore speculation related MSRs during S3 resume")
kmemleak reports this issue:
unreferenced object 0xffff888009cedc00 (size 256):
comm "swapper/0", pid 1, jiffies 4294693823 (age 73.764s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 48 00 00 00 00 00 00 00 ........H.......
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
msr_build_context (include/linux/slab.h:621)
pm_check_save_msr (arch/x86/power/cpu.c:520)
do_one_initcall (init/main.c:1298)
kernel_init_freeable (init/main.c:1370)
kernel_init (init/main.c:1504)
ret_from_fork (arch/x86/entry/entry_64.S:304)
Reproducer:
- boot the VM with a debug kernel config (see
https://github.com/multipath-tcp/mptcp_net-next/issues/268)
- wait ~1 minute
- start a kmemleak scan
The root cause here is alignment within the packed struct saved_context
(from suspend_64.h). Kmemleak only searches for pointers that are
aligned (see how pointers are scanned in kmemleak.c), but pahole shows
that the saved_msrs struct member and all members after it in the
structure are unaligned:
struct saved_context {
struct pt_regs regs; /* 0 168 */
/* --- cacheline 2 boundary (128 bytes) was 40 bytes ago --- */
u16 ds; /* 168 2 */
...
u64 misc_enable; /* 232 8 */
bool misc_enable_saved; /* 240 1 */
/* Note below odd offset values for the remainder of this struct */
struct saved_msrs saved_msrs; /* 241 16 */
/* --- cacheline 4 boundary (256 bytes) was 1 bytes ago --- */
long unsigned int efer; /* 257 8 */
u16 gdt_pad; /* 265 2 */
struct desc_ptr gdt_desc; /* 267 10 */
u16 idt_pad; /* 277 2 */
struct desc_ptr idt; /* 279 10 */
u16 ldt; /* 289 2 */
u16 tss; /* 291 2 */
long unsigned int tr; /* 293 8 */
long unsigned int safety; /* 301 8 */
long unsigned int return_address; /* 309 8 */
/* size: 317, cachelines: 5, members: 25 */
/* last cacheline: 61 bytes */
} __attribute__((__packed__));
Move misc_enable_saved to the end of the struct declaration so that
saved_msrs fits in before the cacheline 4 boundary.
The comment above the saved_context declaration says to fix wakeup_64.S
file and __save/__restore_processor_state() if the struct is modified:
it looks like all the accesses in wakeup_64.S are done through offsets
which are computed at build-time. Update that comment accordingly.
At the end, the false positive kmemleak report is due to a limitation
from kmemleak but it is always good to avoid unaligned members for
optimisation purposes.
Please note that it looks like this issue is not new, e.g.
https://lore.kernel.org/all/9f1bb619-c4ee-21c4-a251-870bd4db04fa@lwfinger.net/https://lore.kernel.org/all/94e48fcd-1dbd-ebd2-4c91-f39941735909@molgen.mpg.de/
[ bp: Massage + cleanup commit message. ]
Fixes: 7a9c2dd08e ("x86/pm: Introduce quirk framework to save/restore extra MSR registers around suspend/resume")
Suggested-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20220426202138.498310-1-matthieu.baerts@tessares.net
The GHCB specification section 2.7 states that when SEV-SNP is enabled,
a guest should not rely on the hypervisor to provide the address of the
AP jump table. Instead, if a guest BIOS wants to provide an AP jump
table, it should record the address in the SNP secrets page so the guest
operating system can obtain it directly from there.
Fix this on the guest kernel side by having SNP guests use the AP jump
table address published in the secrets page rather than issuing a GHCB
request to get it.
[ mroth:
- Improve error handling when ioremap()/memremap() return NULL
- Don't mix function calls with declarations
- Add missing __init
- Tweak commit message ]
Fixes: 0afb6b660a ("x86/sev: Use SEV-SNP AP creation to start secondary CPUs")
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220422135624.114172-3-michael.roth@amd.com
Currently, get_secrets_page() is only reachable from the following call
chain:
__init snp_init_platform_device():
get_secrets_page()
so mark it as __init as well. This is also needed since it calls
early_memremap(), which is also an __init routine.
Similarly, get_jump_table_addr() is only reachable from the following
call chain:
__init setup_real_mode():
sme_sev_setup_real_mode():
sev_es_setup_ap_jump_table():
get_jump_table_addr()
so mark get_jump_table_addr() and everything up that call chain as
__init as well. This is also needed since future patches will add a
call to get_secrets_page(), which needs to be __init due to the reasons
stated above.
Suggested-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220422135624.114172-2-michael.roth@amd.com
Provide a single common definition for the compat_flock and
compat_flock64 structures using the same tricks as for the native
variants. Another extra define is added for the packing required on
x86.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Helge Deller <deller@gmx.de> # parisc
Link: https://lore.kernel.org/r/20220405071314.3225832-4-guoren@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The F_GETLK64/F_SETLK64/F_SETLKW64 fcntl opcodes are only implemented
for the 32-bit syscall APIs, but are also needed for compat handling
on 64-bit kernels.
Consolidate them in unistd.h instead of definining the internal compat
definitions in compat.h, which is rather error prone (e.g. parisc
gets the values wrong currently).
Note that before this change they were never visible to userspace due
to the fact that CONFIG_64BIT is only set for kernel builds.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20220405071314.3225832-3-guoren@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Need to bring commit d8bb92e70a ("drm/dp: Factor out a function to
probe a DPCD address") back as a dependency to further work in
drm-intel-next.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
XSAVEC is the user space counterpart of XSAVES which cannot save supervisor
state. In virtualization scenarios the hypervisor does not expose XSAVES
but XSAVEC to the guest, though the kernel does not make use of it.
That's unfortunate because XSAVEC uses the compacted format of saving the
XSTATE. This is more efficient in terms of storage space vs. XSAVE[OPT] as
it does not create holes for XSTATE components which are not supported or
enabled by the kernel but are available in hardware. There is room for
further optimizations when XSAVEC/S and XGETBV1 are supported.
In order to support XSAVEC:
- Define the XSAVEC ASM macro as it's not yet supported by the required
minimal toolchain.
- Create a software defined X86_FEATURE_XCOMPACTED to select the compacted
XSTATE buffer format for both XSAVEC and XSAVES.
- Make XSAVEC an option in the 'XSAVE' ASM alternatives
Requested-by: Andrew Cooper <Andrew.Cooper3@citrix.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20220404104820.598704095@linutronix.de
When a machine error is graded as PANIC by the AMD grading logic, the
MCE handler calls mce_panic(). The notification chain does not come
into effect so the AMD EDAC driver does not decode the errors. In these
cases, the messages displayed to the user are more cryptic and miss
information that might be relevant, like the context in which the error
took place.
Add messages to the grading logic for machine errors so that it is clear
what error it was.
[ bp: Massage commit message. ]
Signed-off-by: Carlos Bilbao <carlos.bilbao@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Yazen Ghannam <yazen.ghannam@amd.com>
Link: https://lore.kernel.org/r/20220405183212.354606-3-carlos.bilbao@amd.com
The MCE handler needs to understand the severity of the machine errors to
act accordingly. Simplify the AMD grading logic following a logic that
closely resembles the descriptions of the public PPR documents. This will
help include more fine-grained grading of errors in the future.
[ bp: Touchups. ]
Signed-off-by: Carlos Bilbao <carlos.bilbao@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Yazen Ghannam <yazen.ghannam@amd.com>
Link: https://lore.kernel.org/r/20220405183212.354606-2-carlos.bilbao@amd.com
* Remove 's' & 'u' as valid ISA extension
* Do not allow disabling the base extensions 'i'/'m'/'a'/'c'
x86:
* Fix NMI watchdog in guests on AMD
* Fix for SEV cache incoherency issues
* Don't re-acquire SRCU lock in complete_emulated_io()
* Avoid NULL pointer deref if VM creation fails
* Fix race conditions between APICv disabling and vCPU creation
* Bugfixes for disabling of APICv
* Preserve BSP MSR_KVM_POLL_CONTROL across suspend/resume
selftests:
* Do not use bitfields larger than 32-bits, they differ between GCC and clang
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmJi3KUUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroMhvQf/Yncfg3MkOvKsVxnCe7diKDTI/E2n
wBGNIcL8r7L9oIltHL4Mh7JQTacHFQOZ9PQ30NO1p+pznZ03e8LR59IF1JpP7VOU
sWrLZ5a4bIAEjOpA7Jxcee6hUBwewBauDgFLbb+YAI2lAahiH7jVfywDRife/c3k
N2LjeA75K8UvMiDCfjxxxerFJK91zaqjWlUNF2OhtFp/5pnMfS+nli9Q8QS837pZ
oUf+0Beb2RpSHan+wbYVU7X3ZLwtpR0M3w3uXOG+X3as56wDf26znXS02aSwa45x
lfX+pqJfmb4vCJJDXt6avH27EVgTq0Vew+BhQHG3VLRO6uxZ+smX6qmsuw==
=kvbw
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"The main and larger change here is a workaround for AMD's lack of
cache coherency for encrypted-memory guests.
I have another patch pending, but it's waiting for review from the
architecture maintainers.
RISC-V:
- Remove 's' & 'u' as valid ISA extension
- Do not allow disabling the base extensions 'i'/'m'/'a'/'c'
x86:
- Fix NMI watchdog in guests on AMD
- Fix for SEV cache incoherency issues
- Don't re-acquire SRCU lock in complete_emulated_io()
- Avoid NULL pointer deref if VM creation fails
- Fix race conditions between APICv disabling and vCPU creation
- Bugfixes for disabling of APICv
- Preserve BSP MSR_KVM_POLL_CONTROL across suspend/resume
selftests:
- Do not use bitfields larger than 32-bits, they differ between GCC
and clang"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
kvm: selftests: introduce and use more page size-related constants
kvm: selftests: do not use bitfields larger than 32-bits for PTEs
KVM: SEV: add cache flush to solve SEV cache incoherency issues
KVM: SVM: Flush when freeing encrypted pages even on SME_COHERENT CPUs
KVM: SVM: Simplify and harden helper to flush SEV guest page(s)
KVM: selftests: Silence compiler warning in the kvm_page_table_test
KVM: x86/pmu: Update AMD PMC sample period to fix guest NMI-watchdog
x86/kvm: Preserve BSP MSR_KVM_POLL_CONTROL across suspend/resume
KVM: SPDX style and spelling fixes
KVM: x86: Skip KVM_GUESTDBG_BLOCKIRQ APICv update if APICv is disabled
KVM: x86: Pend KVM_REQ_APICV_UPDATE during vCPU creation to fix a race
KVM: nVMX: Defer APICv updates while L2 is active until L1 is active
KVM: x86: Tag APICv DISABLE inhibit, not ABSENT, if APICv is disabled
KVM: Initialize debugfs_dentry when a VM is created to avoid NULL deref
KVM: Add helpers to wrap vcpu->srcu_idx and yell if it's abused
KVM: RISC-V: Use kvm_vcpu.srcu_idx, drop RISC-V's unnecessary copy
KVM: x86: Don't re-acquire SRCU lock in complete_emulated_io()
RISC-V: KVM: Restrict the extensions that can be disabled
RISC-V: KVM: Remove 's' & 'u' as valid ISA extension
Objtool has some hacks in place to workaround toolchain limitations
which otherwise would break no-instrumentation rules. Make the hacks
explicit (and optional for other arches) by turning it into a cmdline
option and kernel config option.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Link: https://lkml.kernel.org/r/b326eeb9c33231b9dfbb925f194ed7ee40edcd7c.1650300597.git.jpoimboe@redhat.com
Objtool secretly does a jump label hack to overcome the limitations of
the toolchain. Make the hack explicit (and optional for other arches)
by turning it into a cmdline option and kernel config option.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Link: https://lkml.kernel.org/r/3bdcbfdd27ecb01ddec13c04bdf756a583b13d24.1650300597.git.jpoimboe@redhat.com
Now that stack validation is an optional feature of objtool, add
CONFIG_OBJTOOL and replace most usages of CONFIG_STACK_VALIDATION with
it.
CONFIG_STACK_VALIDATION can now be considered to be frame-pointer
specific. CONFIG_UNWINDER_ORC is already inherently valid for live
patching, so no need to "validate" it.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Link: https://lkml.kernel.org/r/939bf3d85604b2a126412bf11af6e3bd3b872bcb.1650300597.git.jpoimboe@redhat.com
With SIGTRAP on perf events, we have encountered termination of
processes due to user space attempting to block delivery of SIGTRAP.
Consider this case:
<set up SIGTRAP on a perf event>
...
sigset_t s;
sigemptyset(&s);
sigaddset(&s, SIGTRAP | <and others>);
sigprocmask(SIG_BLOCK, &s, ...);
...
<perf event triggers>
When the perf event triggers, while SIGTRAP is blocked, force_sig_perf()
will force the signal, but revert back to the default handler, thus
terminating the task.
This makes sense for error conditions, but not so much for explicitly
requested monitoring. However, the expectation is still that signals
generated by perf events are synchronous, which will no longer be the
case if the signal is blocked and delivered later.
To give user space the ability to clearly distinguish synchronous from
asynchronous signals, introduce siginfo_t::si_perf_flags and
TRAP_PERF_FLAG_ASYNC (opted for flags in case more binary information is
required in future).
The resolution to the problem is then to (a) no longer force the signal
(avoiding the terminations), but (b) tell user space via si_perf_flags
if the signal was synchronous or not, so that such signals can be
handled differently (e.g. let user space decide to ignore or consider
the data imprecise).
The alternative of making the kernel ignore SIGTRAP on perf events if
the signal is blocked may work for some usecases, but likely causes
issues in others that then have to revert back to interception of
sigprocmask() (which we want to avoid). [ A concrete example: when using
breakpoint perf events to track data-flow, in a region of code where
signals are blocked, data-flow can no longer be tracked accurately.
When a relevant asynchronous signal is received after unblocking the
signal, the data-flow tracking logic needs to know its state is
imprecise. ]
Fixes: 97ba62b278 ("perf: Add support for SIGTRAP on perf events")
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Dmitry Vyukov <dvyukov@google.com>
Link: https://lore.kernel.org/r/20220404111204.935357-1-elver@google.com
Flush the CPU caches when memory is reclaimed from an SEV guest (where
reclaim also includes it being unmapped from KVM's memslots). Due to lack
of coherency for SEV encrypted memory, failure to flush results in silent
data corruption if userspace is malicious/broken and doesn't ensure SEV
guest memory is properly pinned and unpinned.
Cache coherency is not enforced across the VM boundary in SEV (AMD APM
vol.2 Section 15.34.7). Confidential cachelines, generated by confidential
VM guests have to be explicitly flushed on the host side. If a memory page
containing dirty confidential cachelines was released by VM and reallocated
to another user, the cachelines may corrupt the new user at a later time.
KVM takes a shortcut by assuming all confidential memory remain pinned
until the end of VM lifetime. Therefore, KVM does not flush cache at
mmu_notifier invalidation events. Because of this incorrect assumption and
the lack of cache flushing, malicous userspace can crash the host kernel:
creating a malicious VM and continuously allocates/releases unpinned
confidential memory pages when the VM is running.
Add cache flush operations to mmu_notifier operations to ensure that any
physical memory leaving the guest VM get flushed. In particular, hook
mmu_notifier_invalidate_range_start and mmu_notifier_release events and
flush cache accordingly. The hook after releasing the mmu lock to avoid
contention with other vCPUs.
Cc: stable@vger.kernel.org
Suggested-by: Sean Christpherson <seanjc@google.com>
Reported-by: Mingwei Zhang <mizhang@google.com>
Signed-off-by: Mingwei Zhang <mizhang@google.com>
Message-Id: <20220421031407.2516575-4-mizhang@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use clflush_cache_range() to flush the confidential memory when
SME_COHERENT is supported in AMD CPU. Cache flush is still needed since
SME_COHERENT only support cache invalidation at CPU side. All confidential
cache lines are still incoherent with DMA devices.
Cc: stable@vger.kerel.org
Fixes: add5e2f045 ("KVM: SVM: Add support for the SEV-ES VMSA")
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Mingwei Zhang <mizhang@google.com>
Message-Id: <20220421031407.2516575-3-mizhang@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rework sev_flush_guest_memory() to explicitly handle only a single page,
and harden it to fall back to WBINVD if VM_PAGE_FLUSH fails. Per-page
flushing is currently used only to flush the VMSA, and in its current
form, the helper is completely broken with respect to flushing actual
guest memory, i.e. won't work correctly for an arbitrary memory range.
VM_PAGE_FLUSH takes a host virtual address, and is subject to normal page
walks, i.e. will fault if the address is not present in the host page
tables or does not have the correct permissions. Current AMD CPUs also
do not honor SMAP overrides (undocumented in kernel versions of the APM),
so passing in a userspace address is completely out of the question. In
other words, KVM would need to manually walk the host page tables to get
the pfn, ensure the pfn is stable, and then use the direct map to invoke
VM_PAGE_FLUSH. And the latter might not even work, e.g. if userspace is
particularly evil/clever and backs the guest with Secret Memory (which
unmaps memory from the direct map).
Signed-off-by: Sean Christopherson <seanjc@google.com>
Fixes: add5e2f045 ("KVM: SVM: Add support for the SEV-ES VMSA")
Reported-by: Mingwei Zhang <mizhang@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mingwei Zhang <mizhang@google.com>
Message-Id: <20220421031407.2516575-2-mizhang@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
NMI-watchdog is one of the favorite features of kernel developers,
but it does not work in AMD guest even with vPMU enabled and worse,
the system misrepresents this capability via /proc.
This is a PMC emulation error. KVM does not pass the latest valid
value to perf_event in time when guest NMI-watchdog is running, thus
the perf_event corresponding to the watchdog counter will enter the
old state at some point after the first guest NMI injection, forcing
the hardware register PMC0 to be constantly written to 0x800000000001.
Meanwhile, the running counter should accurately reflect its new value
based on the latest coordinated pmc->counter (from vPMC's point of view)
rather than the value written directly by the guest.
Fixes: 168d918f26 ("KVM: x86: Adjust counter sample period after a wrmsr")
Reported-by: Dongli Cao <caodongli@kingsoft.com>
Signed-off-by: Like Xu <likexu@tencent.com>
Reviewed-by: Yanan Wang <wangyanan55@huawei.com>
Tested-by: Yanan Wang <wangyanan55@huawei.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Message-Id: <20220409015226.38619-1-likexu@tencent.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
MSR_KVM_POLL_CONTROL is cleared on reset, thus reverting guests to
host-side polling after suspend/resume. Non-bootstrap CPUs are
restored correctly by the haltpoll driver because they are hot-unplugged
during suspend and hot-plugged during resume; however, the BSP
is not hotpluggable and remains in host-sde polling mode after
the guest resume. The makes the guest pay for the cost of vmexits
every time the guest enters idle.
Fix it by recording BSP's haltpoll state and resuming it during guest
resume.
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Message-Id: <1650267752-46796-1-git-send-email-wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Skip the APICv inhibit update for KVM_GUESTDBG_BLOCKIRQ if APICv is
disabled at the module level to avoid having to acquire the mutex and
potentially process all vCPUs. The DISABLE inhibit will (barring bugs)
never be lifted, so piling on more inhibits is unnecessary.
Fixes: cae72dcc3b ("KVM: x86: inhibit APICv when KVM_GUESTDBG_BLOCKIRQ active")
Cc: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20220420013732.3308816-5-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Make a KVM_REQ_APICV_UPDATE request when creating a vCPU with an
in-kernel local APIC and APICv enabled at the module level. Consuming
kvm_apicv_activated() and stuffing vcpu->arch.apicv_active directly can
race with __kvm_set_or_clear_apicv_inhibit(), as vCPU creation happens
before the vCPU is fully onlined, i.e. it won't get the request made to
"all" vCPUs. If APICv is globally inhibited between setting apicv_active
and onlining the vCPU, the vCPU will end up running with APICv enabled
and trigger KVM's sanity check.
Mark APICv as active during vCPU creation if APICv is enabled at the
module level, both to be optimistic about it's final state, e.g. to avoid
additional VMWRITEs on VMX, and because there are likely bugs lurking
since KVM checks apicv_active in multiple vCPU creation paths. While
keeping the current behavior of consuming kvm_apicv_activated() is
arguably safer from a regression perspective, force apicv_active so that
vCPU creation runs with deterministic state and so that if there are bugs,
they are found sooner than later, i.e. not when some crazy race condition
is hit.
WARNING: CPU: 0 PID: 484 at arch/x86/kvm/x86.c:9877 vcpu_enter_guest+0x2ae3/0x3ee0 arch/x86/kvm/x86.c:9877
Modules linked in:
CPU: 0 PID: 484 Comm: syz-executor361 Not tainted 5.16.13 #2
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1~cloud0 04/01/2014
RIP: 0010:vcpu_enter_guest+0x2ae3/0x3ee0 arch/x86/kvm/x86.c:9877
Call Trace:
<TASK>
vcpu_run arch/x86/kvm/x86.c:10039 [inline]
kvm_arch_vcpu_ioctl_run+0x337/0x15e0 arch/x86/kvm/x86.c:10234
kvm_vcpu_ioctl+0x4d2/0xc80 arch/x86/kvm/../../../virt/kvm/kvm_main.c:3727
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:874 [inline]
__se_sys_ioctl fs/ioctl.c:860 [inline]
__x64_sys_ioctl+0x16d/0x1d0 fs/ioctl.c:860
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x38/0x90 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
The bug was hit by a syzkaller spamming VM creation with 2 vCPUs and a
call to KVM_SET_GUEST_DEBUG.
r0 = openat$kvm(0xffffffffffffff9c, &(0x7f0000000000), 0x0, 0x0)
r1 = ioctl$KVM_CREATE_VM(r0, 0xae01, 0x0)
ioctl$KVM_CAP_SPLIT_IRQCHIP(r1, 0x4068aea3, &(0x7f0000000000)) (async)
r2 = ioctl$KVM_CREATE_VCPU(r1, 0xae41, 0x0) (async)
r3 = ioctl$KVM_CREATE_VCPU(r1, 0xae41, 0x400000000000002)
ioctl$KVM_SET_GUEST_DEBUG(r3, 0x4048ae9b, &(0x7f00000000c0)={0x5dda9c14aa95f5c5})
ioctl$KVM_RUN(r2, 0xae80, 0x0)
Reported-by: Gaoning Pan <pgn@zju.edu.cn>
Reported-by: Yongkang Jia <kangel@zju.edu.cn>
Fixes: 8df14af42f ("kvm: x86: Add support for dynamic APICv activation")
Cc: stable@vger.kernel.org
Cc: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20220420013732.3308816-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Defer APICv updates that occur while L2 is active until nested VM-Exit,
i.e. until L1 regains control. vmx_refresh_apicv_exec_ctrl() assumes L1
is active and (a) stomps all over vmcs02 and (b) neglects to ever updated
vmcs01. E.g. if vmcs12 doesn't enable the TPR shadow for L2 (and thus no
APICv controls), L1 performs nested VM-Enter APICv inhibited, and APICv
becomes unhibited while L2 is active, KVM will set various APICv controls
in vmcs02 and trigger a failed VM-Entry. The kicker is that, unless
running with nested_early_check=1, KVM blames L1 and chaos ensues.
In all cases, ignoring vmcs02 and always deferring the inhibition change
to vmcs01 is correct (or at least acceptable). The ABSENT and DISABLE
inhibitions cannot truly change while L2 is active (see below).
IRQ_BLOCKING can change, but it is firmly a best effort debug feature.
Furthermore, only L2's APIC is accelerated/virtualized to the full extent
possible, e.g. even if L1 passes through its APIC to L2, normal MMIO/MSR
interception will apply to the virtual APIC managed by KVM.
The exception is the SELF_IPI register when x2APIC is enabled, but that's
an acceptable hole.
Lastly, Hyper-V's Auto EOI can technically be toggled if L1 exposes the
MSRs to L2, but for that to work in any sane capacity, L1 would need to
pass through IRQs to L2 as well, and IRQs must be intercepted to enable
virtual interrupt delivery. I.e. exposing Auto EOI to L2 and enabling
VID for L2 are, for all intents and purposes, mutually exclusive.
Lack of dynamic toggling is also why this scenario is all but impossible
to encounter in KVM's current form. But a future patch will pend an
APICv update request _during_ vCPU creation to plug a race where a vCPU
that's being created doesn't get included in the "all vCPUs request"
because it's not yet visible to other vCPUs. If userspaces restores L2
after VM creation (hello, KVM selftests), the first KVM_RUN will occur
while L2 is active and thus service the APICv update request made during
VM creation.
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220420013732.3308816-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Set the DISABLE inhibit, not the ABSENT inhibit, if APICv is disabled via
module param. A recent refactoring to add a wrapper for setting/clearing
inhibits unintentionally changed the flag, probably due to a copy+paste
goof.
Fixes: 4f4c4a3ee5 ("KVM: x86: Trace all APICv inhibit changes and capture overall status")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20220420013732.3308816-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add wrappers to acquire/release KVM's SRCU lock when stashing the index
in vcpu->src_idx, along with rudimentary detection of illegal usage,
e.g. re-acquiring SRCU and thus overwriting vcpu->src_idx. Because the
SRCU index is (currently) either 0 or 1, illegal nesting bugs can go
unnoticed for quite some time and only cause problems when the nested
lock happens to get a different index.
Wrap the WARNs in PROVE_RCU=y, and make them ONCE, otherwise KVM will
likely yell so loudly that it will bring the kernel to its knees.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Tested-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220415004343.2203171-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Don't re-acquire SRCU in complete_emulated_io() now that KVM acquires the
lock in kvm_arch_vcpu_ioctl_run(). More importantly, don't overwrite
vcpu->srcu_idx. If the index acquired by complete_emulated_io() differs
from the one acquired by kvm_arch_vcpu_ioctl_run(), KVM will effectively
leak a lock and hang if/when synchronize_srcu() is invoked for the
relevant grace period.
Fixes: 8d25b7beca ("KVM: x86: pull kvm->srcu read-side to kvm_arch_vcpu_ioctl_run")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20220415004343.2203171-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
objdump complains:
vmlinux.o: warning: objtool: __tdx_hypercall()+0x74: unreachable instruction
because __tdx_hypercall_failed() won't return but panic the guest.
Annotate that that is ok and desired.
Fixes: eb94f1b6a7 ("x86/tdx: Add __tdx_module_call() and __tdx_hypercall() helper functions")
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220420115025.5448-1-bp@alien8.de
During patch review, it was decided the SNP guest driver name should not
be SEV-SNP specific, but should be generic for use with anything SEV.
However, this feedback was missed and the driver name, and many of the
driver functions and structures, are SEV-SNP name specific. Rename the
driver to "sev-guest" (to match the misc device that is created) and
update some of the function and structure names, too.
While in the file, adjust the one pr_err() message to be a dev_err()
message so that the message, if issued, uses the driver name.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/307710bb5515c9088a19fd0b930268c7300479b2.1650464054.git.thomas.lendacky@amd.com
The first "if" condition in __memcpy_flushcache is supposed to align the
"dest" variable to 8 bytes and copy data up to this alignment. However,
this condition may misbehave if "size" is greater than 4GiB.
The statement min_t(unsigned, size, ALIGN(dest, 8) - dest); casts both
arguments to unsigned int and selects the smaller one. However, the
cast truncates high bits in "size" and it results in misbehavior.
For example:
suppose that size == 0x100000001, dest == 0x200000002
min_t(unsigned, size, ALIGN(dest, 8) - dest) == min_t(0x1, 0xe) == 0x1;
...
dest += 0x1;
so we copy just one byte "and" dest remains unaligned.
This patch fixes the bug by replacing unsigned with size_t.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The helpers in arch/x86/boot/compressed/efi.c might be used during
early boot to access the EFI system/config tables, and in some cases
these EFI helpers might attempt to print debug/error messages, before
console_init() has been called.
__putstr() checks some variables to avoid printing anything before
the console has been initialized, but this isn't enough since those
variables live in .bss, which may not have been cleared yet. This can
lead to a triple-fault occurring, primarily when booting in legacy/CSM
mode (where EFI helpers will attempt to print some debug messages).
Fix this by declaring these globals in .data section instead so there
is no dependency on .bss being cleared before accessing them.
Fixes: c01fce9cef ("x86/compressed: Add SEV-SNP feature detection/setup")
Reported-by: Borislav Petkov <bp@suse.de>
Suggested-by: Thomas Lendacky <Thomas.Lendacky@amd.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220420152613.145077-1-michael.roth@amd.com
Adding initial PCI ids for RPL-P.
RPL-P behaves identically to ADL-P from i915's point of view.
Changes since V1 :
- SUBPLATFORM ADL_N and RPL_P clash as both are ADLP
based - Matthew R
Bspec: 55376
Signed-off-by: Matt Atwood <matthew.s.atwood@intel.com>
Signed-off-by: Madhumitha Tolakanahalli Pradeep <madhumitha.tolakanahalli.pradeep@intel.com>
Signed-off-by: Tejas Upadhyay <tejaskumarx.surendrakumar.upadhyay@intel.com>
[mattrope: Corrected comment formatting to match coding style]
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220418062157.2974665-1-tejaskumarx.surendrakumar.upadhyay@intel.com
The startup_xen() kernel entry point is referenced by the ".note.Xen"
section, and is the real entry point of the VM. Control transfer is
through IRET, which *could* set NEED_ENDBR, however Xen currently does
no such thing.
Add ANNOTATE_NOENDBR to silence future objtool warnings.
Fixes: ed53a0d971 ("x86/alternative: Use .ibt_endbr_seal to seal indirect calls")
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Link: https://lkml.kernel.org/r/a87bd48b06d11ec4b98122a429e71e489b4e48c3.1650300597.git.jpoimboe@redhat.com
The __put_user_nocheck*() inner labels are exported, so in keeping with
the "allow exported functions to be indirectly called" policy, add
ENDBR.
Fixes: ed53a0d971 ("x86/alternative: Use .ibt_endbr_seal to seal indirect calls")
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/207f02177a23031091d1a608de6049a9e5e8ff80.1650300597.git.jpoimboe@redhat.com
Objtool can figure out that some \cfunc()s are noreturn and then
complains about certain instances having unreachable tails:
vmlinux.o: warning: objtool: asm_exc_xen_unknown_trap()+0x16: unreachable instruction
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/20220408094718.441854969@infradead.org
SYM_CODE_START*() doesn't get auto-validated and needs an UNWIND hint
to get checked, add one.
vmlinux.o: warning: objtool: pvh_start_xen()+0x0: unreachable
Reported-by: Thomas Gleixner <tglx@linutronix.de>
Reported-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/20220408094718.321246297@infradead.org
A crash was observed in the ORC unwinder:
BUG: stack guard page was hit at 000000000dd984a2 (stack is 00000000d1caafca..00000000613712f0)
kernel stack overflow (page fault): 0000 [#1] SMP NOPTI
CPU: 93 PID: 23787 Comm: context_switch1 Not tainted 5.4.145 #1
RIP: 0010:unwind_next_frame
Call Trace:
<NMI>
perf_callchain_kernel
get_perf_callchain
perf_callchain
perf_prepare_sample
perf_event_output_forward
__perf_event_overflow
perf_ibs_handle_irq
perf_ibs_nmi_handler
nmi_handle
default_do_nmi
do_nmi
end_repeat_nmi
This was really two bugs:
1) The perf IBS code passed inconsistent regs to the unwinder.
2) The unwinder didn't handle the bad input gracefully.
Fix the latter bug. The ORC unwinder needs to be immune against bad
inputs. The problem is that stack_access_ok() doesn't recheck the
validity of the full range of registers after switching to the next
valid stack with get_stack_info(). Fix that.
[ jpoimboe: rewrote commit log ]
Signed-off-by: Dmitry Monakhov <dmtrmonakhov@yandex-team.ru>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/1650353656-956624-1-git-send-email-dmtrmonakhov@yandex-team.ru
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
From the perspective of Intel cstate residency counters,
SAPPHIRERAPIDS_X is the same as ICELAKE_X.
Share the code with it. And update the comments for SAPPHIRERAPIDS_X.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Link: https://lkml.kernel.org/r/20220415104520.2737004-1-rui.zhang@intel.com
When resuming from system sleep state, restore_processor_state()
restores the boot CPU MSRs. These MSRs could be emulated by microcode.
If microcode is not loaded yet, writing to emulated MSRs leads to
unchecked MSR access error:
...
PM: Calling lapic_suspend+0x0/0x210
unchecked MSR access error: WRMSR to 0x10f (tried to write 0x0...0) at rIP: ... (native_write_msr)
Call Trace:
<TASK>
? restore_processor_state
x86_acpi_suspend_lowlevel
acpi_suspend_enter
suspend_devices_and_enter
pm_suspend.cold
state_store
kobj_attr_store
sysfs_kf_write
kernfs_fop_write_iter
new_sync_write
vfs_write
ksys_write
__x64_sys_write
do_syscall_64
entry_SYSCALL_64_after_hwframe
RIP: 0033:0x7fda13c260a7
To ensure microcode emulated MSRs are available for restoration, load
the microcode on the boot CPU before restoring these MSRs.
[ Pawan: write commit message and productize it. ]
Fixes: e2a1256b17 ("x86/speculation: Restore speculation related MSRs during S3 resume")
Reported-by: Kyle D. Pelton <kyle.d.pelton@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Tested-by: Kyle D. Pelton <kyle.d.pelton@intel.com>
Cc: stable@vger.kernel.org
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215841
Link: https://lore.kernel.org/r/4350dfbf785cd482d3fafa72b2b49c83102df3ce.1650386317.git.pawan.kumar.gupta@linux.intel.com
Pull turbostat changes for 5.19 from Len Brown:
"Chen Yu (1):
tools/power turbostat: Support thermal throttle count print
Dan Merillat (1):
tools/power turbostat: fix dump for AMD cpus
Len Brown (5):
tools/power turbostat: tweak --show and --hide capability
tools/power turbostat: fix ICX DRAM power numbers
tools/power turbostat: be more useful as non-root
tools/power turbostat: No build warnings with -Wextra
tools/power turbostat: version 2022.04.16
Sumeet Pawnikar (2):
tools/power turbostat: Add Power Limit4 support
tools/power turbostat: print power values upto three decimal
Zephaniah E. Loss-Cutler-Hull (2):
tools/power turbostat: Allow -e for all names.
tools/power turbostat: Allow printing header every N iterations"
* 'turbostat' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux:
tools/power turbostat: version 2022.04.16
tools/power turbostat: No build warnings with -Wextra
tools/power turbostat: be more useful as non-root
tools/power turbostat: fix ICX DRAM power numbers
tools/power turbostat: Support thermal throttle count print
tools/power turbostat: Allow printing header every N iterations
tools/power turbostat: Allow -e for all names.
tools/power turbostat: print power values upto three decimal
tools/power turbostat: Add Power Limit4 support
tools/power turbostat: fix dump for AMD cpus
tools/power turbostat: tweak --show and --hide capability
The spacing is off in the memory encryption features message on AMD
platforms that support memory encryption, e.g.:
"Memory Encryption Features active:AMD SEV SEV-ES"
There is no space before "AMD" and two spaces after it. Fix this so that
the message is spaced properly:
"Memory Encryption Features active: AMD SEV SEV-ES"
Fixes: 968b493173 ("x86/mm: Make DMA memory shared for TD guest")
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Link: https://lkml.kernel.org/r/02401f3024b18e90bc2508147e22e729436cb6d9.1650298573.git.thomas.lendacky@amd.com
Intel is subdividing the mobile segment with additional models
with the same codename. Using the Intel "N" and "P" suffices
for these will be less confusing than trying to map to some
different naming convention.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/YlS7n7Xtso9BXZA2@agluck-desk3.sc.intel.com
<asm/dma-mapping.h> gets pulled in by all drivers using the DMA API.
Remove x86 internal variables and unnecessary includes from it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Tested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Reuse the generic swiotlb initialization for xen-swiotlb. For ARM/ARM64
this works trivially, while for x86 xen_swiotlb_fixup needs to be passed
as the remap argument to swiotlb_init_remap/swiotlb_init_late.
Note that the lower bound of the swiotlb size is changed to the smaller
IO_TLB_MIN_SLABS based value with this patch, but that is fine as the
2MB value used in Xen before was just an optimization and is not the
hard lower bound.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Tested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
To shared more code between swiotlb and xen-swiotlb, offer a
swiotlb_init_remap interface and add a remap callback to
swiotlb_init_late that will allow Xen to remap the buffer without
duplicating much of the logic.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Tested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Let the caller chose a zone to allocate from. This will be used
later on by the xen-swiotlb initialization on arm.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Tested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Pass a boolean flag to indicate if swiotlb needs to be enabled based on
the addressing needs, and replace the verbose argument with a set of
flags, including one to force enable bounce buffering.
Note that this patch removes the possibility to force xen-swiotlb use
with the swiotlb=force parameter on the command line on x86 (arm and
arm64 never supported that), but this interface will be restored shortly.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Tested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Move enabling SWIOTLB_FORCE for guest memory encryption into common code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Tested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
The IOMMU table tries to separate the different IOMMUs into different
backends, but actually requires various cross calls.
Rewrite the code to do the generic swiotlb/swiotlb-xen setup directly
in pci-dma.c and then just call into the IOMMU drivers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Tested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
swiotlb_late_init_with_default_size is an overly verbose name that
doesn't even catch what the function is doing, given that the size is
not just a default but the actual requested size.
Rename it to swiotlb_init_late.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Tested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
- Use either MSR_TSX_FORCE_ABORT or MSR_IA32_TSX_CTRL to disable TSX to
cover all CPUs which allow to disable it.
- Disable TSX development mode at boot so that a microcode update which
provides TSX development mode does not suddenly make the system
vulnerable to TSX Asynchronous Abort.
-----BEGIN PGP SIGNATURE-----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=UQaW
-----END PGP SIGNATURE-----
Merge tag 'x86-urgent-2022-04-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
"Two x86 fixes related to TSX:
- Use either MSR_TSX_FORCE_ABORT or MSR_IA32_TSX_CTRL to disable TSX
to cover all CPUs which allow to disable it.
- Disable TSX development mode at boot so that a microcode update
which provides TSX development mode does not suddenly make the
system vulnerable to TSX Asynchronous Abort"
* tag 'x86-urgent-2022-04-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/tsx: Disable TSX development mode at boot
x86/tsx: Use MSR_TSX_CTRL to clear CPUID bits
Commit 3ee48b6af4 ("mm, x86: Saving vmcore with non-lazy freeing of
vmas") introduced set_iounmap_nonlazy(), which sets vmap_lazy_nr to
lazy_max_pages() + 1, ensuring that any future vunmaps() immediately
purge the vmap areas instead of doing it lazily.
Commit 690467c81b ("mm/vmalloc: Move draining areas out of caller
context") moved the purging from the vunmap() caller to a worker thread.
Unfortunately, set_iounmap_nonlazy() can cause the worker thread to spin
(possibly forever). For example, consider the following scenario:
1. Thread reads from /proc/vmcore. This eventually calls
__copy_oldmem_page() -> set_iounmap_nonlazy(), which sets
vmap_lazy_nr to lazy_max_pages() + 1.
2. Then it calls free_vmap_area_noflush() (via iounmap()), which adds 2
pages (one page plus the guard page) to the purge list and
vmap_lazy_nr. vmap_lazy_nr is now lazy_max_pages() + 3, so the
drain_vmap_work is scheduled.
3. Thread returns from the kernel and is scheduled out.
4. Worker thread is scheduled in and calls drain_vmap_area_work(). It
frees the 2 pages on the purge list. vmap_lazy_nr is now
lazy_max_pages() + 1.
5. This is still over the threshold, so it tries to purge areas again,
but doesn't find anything.
6. Repeat 5.
If the system is running with only one CPU (which is typicial for kdump)
and preemption is disabled, then this will never make forward progress:
there aren't any more pages to purge, so it hangs. If there is more
than one CPU or preemption is enabled, then the worker thread will spin
forever in the background. (Note that if there were already pages to be
purged at the time that set_iounmap_nonlazy() was called, this bug is
avoided.)
This can be reproduced with anything that reads from /proc/vmcore
multiple times. E.g., vmcore-dmesg /proc/vmcore.
It turns out that improvements to vmap() over the years have obsoleted
the need for this "optimization". I benchmarked `dd if=/proc/vmcore
of=/dev/null` with 4k and 1M read sizes on a system with a 32GB vmcore.
The test was run on 5.17, 5.18-rc1 with a fix that avoided the hang, and
5.18-rc1 with set_iounmap_nonlazy() removed entirely:
|5.17 |5.18+fix|5.18+removal
4k|40.86s| 40.09s| 26.73s
1M|24.47s| 23.98s| 21.84s
The removal was the fastest (by a wide margin with 4k reads). This
patch removes set_iounmap_nonlazy().
Link: https://lkml.kernel.org/r/52f819991051f9b865e9ce25605509bfdbacadcd.1649277321.git.osandov@fb.com
Fixes: 690467c81b ("mm/vmalloc: Move draining areas out of caller context")
Signed-off-by: Omar Sandoval <osandov@fb.com>
Acked-by: Chris Down <chris@chrisdown.name>
Reviewed-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Baoquan He <bhe@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Merge the 32- and 64-bit implementations of load_gs_index().
Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lore.kernel.org/r/20220325153953.162643-5-brgerst@gmail.com
GS is always a user segment now.
Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lore.kernel.org/r/20220325153953.162643-4-brgerst@gmail.com
If you are copying to an address in the kmap region, you may not copy
across a page boundary, no matter what the size of the underlying
allocation. You can't kmap() a slab page because slab pages always
come from low memory.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220110231530.665970-2-willy@infradead.org
Read a record is cleared by others, but the deleted record cache entry is
still created by erst_get_record_id_next. When next enumerate the records,
get the cached deleted record, then erst_read() return -ENOENT and try to
get next record, loop back to first ID will return 0 in function
__erst_record_id_cache_add_one and then set record_id as
APEI_ERST_INVALID_RECORD_ID, finished this time read operation.
It will result in read the records just in the cache hereafter.
This patch cleared the deleted record cache, fix the issue that
"./erst-inject -p" shows record counts not equal to "./erst-inject -n".
A reproducer of the problem(retry many times):
[root@localhost erst-inject]# ./erst-inject -c 0xaaaaa00011
[root@localhost erst-inject]# ./erst-inject -p
rc: 273
rcd sig: CPER
rcd id: 0xaaaaa00012
rc: 273
rcd sig: CPER
rcd id: 0xaaaaa00013
rc: 273
rcd sig: CPER
rcd id: 0xaaaaa00014
[root@localhost erst-inject]# ./erst-inject -i 0xaaaaa000006
[root@localhost erst-inject]# ./erst-inject -i 0xaaaaa000007
[root@localhost erst-inject]# ./erst-inject -i 0xaaaaa000008
[root@localhost erst-inject]# ./erst-inject -p
rc: 273
rcd sig: CPER
rcd id: 0xaaaaa00012
rc: 273
rcd sig: CPER
rcd id: 0xaaaaa00013
rc: 273
rcd sig: CPER
rcd id: 0xaaaaa00014
[root@localhost erst-inject]# ./erst-inject -n
total error record count: 6
Signed-off-by: Liu Xinpeng <liuxp11@chinatelecom.cn>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The pr_debug() intends to display the memsz member, but the
parameter is actually the bufsz member (which is already
displayed). Correct this to display memsz value.
Signed-off-by: Eric DeVolder <eric.devolder@oracle.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Baoquan He <bhe@redhat.com>
Link: https://lore.kernel.org/r/20220413164237.20845-2-eric.devolder@oracle.com
Exit to userspace when emulating an atomic guest access if the CMPXCHG on
the userspace address faults. Emulating the access as a write and thus
likely treating it as emulated MMIO is wrong, as KVM has already
confirmed there is a valid, writable memslot.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220202004945.2540433-6-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use the recently introduce __try_cmpxchg_user() to emulate atomic guest
accesses via the associated userspace address instead of mapping the
backing pfn into kernel address space. Using kvm_vcpu_map() is unsafe as
it does not coordinate with KVM's mmu_notifier to ensure the hva=>pfn
translation isn't changed/unmapped in the memremap() path, i.e. when
there's no struct page and thus no elevated refcount.
Fixes: 42e35f8072 ("KVM/X86: Use kvm_vcpu_map in emulator_cmpxchg_emulated")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220202004945.2540433-5-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use the recently introduced __try_cmpxchg_user() to update guest PTE A/D
bits instead of mapping the PTE into kernel address space. The VM_PFNMAP
path is broken as it assumes that vm_pgoff is the base pfn of the mapped
VMA range, which is conceptually wrong as vm_pgoff is the offset relative
to the file and has nothing to do with the pfn. The horrific hack worked
for the original use case (backing guest memory with /dev/mem), but leads
to accessing "random" pfns for pretty much any other VM_PFNMAP case.
Fixes: bd53cb35a3 ("X86/KVM: Handle PFNs outside of kernel reach when touching GPTEs")
Debugged-by: Tadeusz Struk <tadeusz.struk@linaro.org>
Tested-by: Tadeusz Struk <tadeusz.struk@linaro.org>
Reported-by: syzbot+6cde2282daa792c49ab8@syzkaller.appspotmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220202004945.2540433-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add support for CMPXCHG loops on userspace addresses. Provide both an
"unsafe" version for tight loops that do their own uaccess begin/end, as
well as a "safe" version for use cases where the CMPXCHG is not buried in
a loop, e.g. KVM will resume the guest instead of looping when emulation
of a guest atomic accesses fails the CMPXCHG.
Provide 8-byte versions for 32-bit kernels so that KVM can do CMPXCHG on
guest PAE PTEs, which are accessed via userspace addresses.
Guard the asm_volatile_goto() variation with CC_HAS_ASM_GOTO_TIED_OUTPUT,
the "+m" constraint fails on some compilers that otherwise support
CC_HAS_ASM_GOTO_OUTPUT.
Cc: stable@vger.kernel.org
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Co-developed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220202004945.2540433-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If an SEV-ES guest requests termination, exit to userspace with
KVM_EXIT_SYSTEM_EVENT and a dedicated SEV_TERM type instead of -EINVAL
so that userspace can take appropriate action.
See AMD's GHCB spec section '4.1.13 Termination Request' for more details.
Suggested-by: Sean Christopherson <seanjc@google.com>
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Cc: kvm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Peter Gonda <pgonda@google.com>
Reported-by: kernel test robot <lkp@intel.com>
Message-Id: <20220407210233.782250-1-pgonda@google.com>
[Add documentatino. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Clear the IDT vectoring field in vmcs12 on next VM-Exit due to a double
or triple fault. Per the SDM, a VM-Exit isn't considered to occur during
event delivery if the exit is due to an intercepted double fault or a
triple fault. Opportunistically move the default clearing (no event
"pending") into the helper so that it's more obvious that KVM does indeed
handle this case.
Note, the double fault case is worded rather wierdly in the SDM:
The original event results in a double-fault exception that causes the
VM exit directly.
Temporarily ignoring injected events, double faults can _only_ occur if
an exception occurs while attempting to deliver a different exception,
i.e. there's _always_ an original event. And for injected double fault,
while there's no original event, injected events are never subject to
interception.
Presumably the SDM is calling out that a the vectoring info will be valid
if a different exit occurs after a double fault, e.g. if a #PF occurs and
is intercepted while vectoring #DF, then the vectoring info will show the
double fault. In other words, the clause can simply be read as:
The VM exit is caused by a double-fault exception.
Fixes: 4704d0befb ("KVM: nVMX: Exiting from L2 to L1")
Cc: Chenyi Qiang <chenyi.qiang@intel.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220407002315.78092-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Don't modify vmcs12 exit fields except EXIT_REASON and EXIT_QUALIFICATION
when performing a nested VM-Exit due to failed VM-Entry. Per the SDM,
only the two aformentioned fields are filled and "All other VM-exit
information fields are unmodified".
Fixes: 4704d0befb ("KVM: nVMX: Exiting from L2 to L1")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220407002315.78092-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Remove WARNs that sanity check that KVM never lets a triple fault for L2
escape and incorrectly end up in L1. In normal operation, the sanity
check is perfectly valid, but it incorrectly assumes that it's impossible
for userspace to induce KVM_REQ_TRIPLE_FAULT without bouncing through
KVM_RUN (which guarantees kvm_check_nested_state() will see and handle
the triple fault).
The WARN can currently be triggered if userspace injects a machine check
while L2 is active and CR4.MCE=0. And a future fix to allow save/restore
of KVM_REQ_TRIPLE_FAULT, e.g. so that a synthesized triple fault isn't
lost on migration, will make it trivially easy for userspace to trigger
the WARN.
Clearing KVM_REQ_TRIPLE_FAULT when forcibly leaving guest mode is
tempting, but wrong, especially if/when the request is saved/restored,
e.g. if userspace restores events (including a triple fault) and then
restores nested state (which may forcibly leave guest mode). Ignoring
the fact that KVM doesn't currently provide the necessary APIs, it's
userspace's responsibility to manage pending events during save/restore.
------------[ cut here ]------------
WARNING: CPU: 7 PID: 1399 at arch/x86/kvm/vmx/nested.c:4522 nested_vmx_vmexit+0x7fe/0xd90 [kvm_intel]
Modules linked in: kvm_intel kvm irqbypass
CPU: 7 PID: 1399 Comm: state_test Not tainted 5.17.0-rc3+ #808
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
RIP: 0010:nested_vmx_vmexit+0x7fe/0xd90 [kvm_intel]
Call Trace:
<TASK>
vmx_leave_nested+0x30/0x40 [kvm_intel]
vmx_set_nested_state+0xca/0x3e0 [kvm_intel]
kvm_arch_vcpu_ioctl+0xf49/0x13e0 [kvm]
kvm_vcpu_ioctl+0x4b9/0x660 [kvm]
__x64_sys_ioctl+0x83/0xb0
do_syscall_64+0x3b/0xc0
entry_SYSCALL_64_after_hwframe+0x44/0xae
</TASK>
---[ end trace 0000000000000000 ]---
Fixes: cb6a32c2b8 ("KVM: x86: Handle triple fault in L2 without killing L1")
Cc: stable@vger.kernel.org
Cc: Chenyi Qiang <chenyi.qiang@intel.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220407002315.78092-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use static calls to improve kvm_pmu_ops performance, following the same
pattern and naming scheme used by kvm-x86-ops.h.
Here are the worst fenced_rdtsc() cycles numbers for the kvm_pmu_ops
functions that is most often called (up to 7 digits of calls) when running
a single perf test case in a guest on an ICX 2.70GHz host (mitigations=on):
| legacy | static call
------------------------------------------------------------
.pmc_idx_to_pmc | 1304840 | 994872 (+23%)
.pmc_is_enabled | 978670 | 1011750 (-3%)
.msr_idx_to_pmc | 47828 | 41690 (+12%)
.is_valid_msr | 28786 | 30108 (-4%)
Signed-off-by: Like Xu <likexu@tencent.com>
[sean: Handle static call updates in pmu.c, tweak changelog]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220329235054.3534728-5-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The pmu_ops should be moved to kvm_x86_init_ops and tagged as __initdata.
That'll save those precious few bytes, and more importantly make
the original ops unreachable, i.e. make it harder to sneak in post-init
modification bugs.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Like Xu <likexu@tencent.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220329235054.3534728-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Replace the kvm_pmu_ops pointer in common x86 with an instance of the
struct to save one pointer dereference when invoking functions. Copy the
struct by value to set the ops during kvm_init().
Signed-off-by: Like Xu <likexu@tencent.com>
[sean: Move pmc_is_enabled(), make kvm_pmu_ops static]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220329235054.3534728-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The kvm_ops_static_call_update() is defined in kvm_host.h. That's
completely unnecessary, it should have exactly one caller,
kvm_arch_hardware_setup(). Move the helper to x86.c and have it do the
actual memcpy() of the ops in addition to the static call updates. This
will also allow for cleanly giving kvm_pmu_ops static_call treatment.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Like Xu <likexu@tencent.com>
[sean: Move memcpy() into the helper and rename accordingly]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220329235054.3534728-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Derive the mask of RWX bits reported on EPT violations from the mask of
RWX bits that are shoved into EPT entries; the layout is the same, the
EPT violation bits are simply shifted by three. Use the new shift and a
slight copy-paste of the mask derivation instead of completely open
coding the same to convert between the EPT entry bits and the exit
qualification when synthesizing a nested EPT Violation.
No functional change intended.
Cc: SU Hang <darcy.sh@antgroup.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220329030108.97341-3-darcy.sh@antgroup.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Using self-expressing macro definition EPT_VIOLATION_GVA_VALIDATION
and EPT_VIOLATION_GVA_TRANSLATED instead of 0x180
in FNAME(walk_addr_generic)().
Signed-off-by: SU Hang <darcy.sh@antgroup.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220329030108.97341-2-darcy.sh@antgroup.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When the "nopv" command line parameter is used, it should not waste
memory for kvmclock.
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Message-Id: <1646727529-11774-1-git-send-email-wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Adjust the field pkru_mask to the back of direct_map to make up 8-byte
alignment.This reduces the size of kvm_mmu by 8 bytes.
Signed-off-by: Peng Hao <flyingpeng@tencent.com>
Message-Id: <20220228030749.88353-1-flyingpeng@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The header lapic.h is included more than once, remove one of them.
Signed-off-by: Like Xu <likexu@tencent.com>
Message-Id: <20220406063715.55625-2-likexu@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Merge branch for features that did not make it into 5.18:
* New ioctls to get/set TSC frequency for a whole VM
* Allow userspace to opt out of hypercall patching
Nested virtualization improvements for AMD:
* Support for "nested nested" optimizations (nested vVMLOAD/VMSAVE,
nested vGIF)
* Allow AVIC to co-exist with a nested guest running
* Fixes for LBR virtualizations when a nested guest is running,
and nested LBR virtualization support
* PAUSE filtering for nested hypervisors
Guest support:
* Decoupling of vcpu_is_preempted from PV spinlocks
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Confidential computing (coco) hardware such as AMD SEV (Secure Encrypted
Virtualization) allows a guest owner to inject secrets into the VMs
memory without the host/hypervisor being able to read them.
Firmware support for secret injection is available in OVMF, which
reserves a memory area for secret injection and includes a pointer to it
the in EFI config table entry LINUX_EFI_COCO_SECRET_TABLE_GUID.
If EFI exposes such a table entry, uefi_init() will keep a pointer to
the EFI config table entry in efi.coco_secret, so it can be used later
by the kernel (specifically drivers/virt/coco/efi_secret). It will also
appear in the kernel log as "CocoSecret=ADDRESS"; for example:
[ 0.000000] efi: EFI v2.70 by EDK II
[ 0.000000] efi: CocoSecret=0x7f22e680 SMBIOS=0x7f541000 ACPI=0x7f77e000 ACPI 2.0=0x7f77e014 MEMATTR=0x7ea0c018
The new functionality can be enabled with CONFIG_EFI_COCO_SECRET=y.
Signed-off-by: Dov Murik <dovmurik@linux.ibm.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://lore.kernel.org/r/20220412212127.154182-2-dovmurik@linux.ibm.com
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Daniel stumbled over the bit overlap of the i82498DX external APIC and the
TSC deadline timer configuration bit in modern APICs, which is neither
documented in the code nor in the current SDM. Maciej provided links to
the original i82489DX/486 documentation. See Link.
Remove the i82489DX macro maze, use a i82489DX specific define in the apic
code and document the overlap in a comment.
Reported-by: Daniel Vacek <neelx@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Maciej W. Rozycki <macro@orcam.me.uk>
Link: https://lore.kernel.org/r/87ee22f3ci.ffs@tglx
When overriding NHLT ACPI-table tests show that on some platforms
there is problem that NHLT contains garbage after hibernation/resume
cycle.
Problem stems from the fact that ACPI override performs early memory
allocation using memblock_phys_alloc_range() in
memblock_phys_alloc_range(). This memory block is later being marked as
ACPI memory block in arch_reserve_mem_area(). Later when memory areas
are considered for hibernation it is being marked as nosave in
e820__register_nosave_regions().
Fix this by marking ACPI override memory area as ACPI NVS
(Non-Volatile-Sleeping), which according to specification needs to be
saved on entering S4 and restored when leaving and is implemented as
such in kernel.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* Miscellaneous bugfixes
* A small cleanup for the new workqueue code
* Documentation syntax fix
RISC-V:
* Remove hgatp zeroing in kvm_arch_vcpu_put()
* Fix alignment of the guest_hang() in KVM selftest
* Fix PTE A and D bits in KVM selftest
* Missing #include in vcpu_fp.c
ARM:
* Some PSCI fixes after introducing PSCIv1.1 and SYSTEM_RESET2
* Fix the MMU write-lock not being taken on THP split
* Fix mixed-width VM handling
* Fix potential UAF when debugfs registration fails
* Various selftest updates for all of the above
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmJVtdMUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroO33QgAiPh80xUkYfnl8FVN440S5F7UOPQ2
Cs/PbroNoP+Oz2GoG07aaqnUkFFApeBE5S+VMu1zhRNAernqpreN64/Y2iNaz0Y6
+MbvEX0FhQRW0UZJIF2m49ilgO8Gkt6aEpVRulq5G9w4NWiH1PtR25FVXfDMi8OG
xdw4x1jwXNI9lOQJ5EpUKVde3rAbxCfoC6hCTh5pCNd9oLuVeLfnC+Uv91fzXltl
EIeBlV0/mAi3RLp2E/AX38WP6ucMZqOOAy91/RTqX6oIx/7QL28ZNHXVrwQ67Hkd
pAr3MAk84tZL58lnosw53i5aXAf9CBp0KBnpk2KGutfRNJ4Vzs1e+DZAJA==
=vqAv
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"x86:
- Miscellaneous bugfixes
- A small cleanup for the new workqueue code
- Documentation syntax fix
RISC-V:
- Remove hgatp zeroing in kvm_arch_vcpu_put()
- Fix alignment of the guest_hang() in KVM selftest
- Fix PTE A and D bits in KVM selftest
- Missing #include in vcpu_fp.c
ARM:
- Some PSCI fixes after introducing PSCIv1.1 and SYSTEM_RESET2
- Fix the MMU write-lock not being taken on THP split
- Fix mixed-width VM handling
- Fix potential UAF when debugfs registration fails
- Various selftest updates for all of the above"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (24 commits)
KVM: x86: hyper-v: Avoid writing to TSC page without an active vCPU
KVM: SVM: Do not activate AVIC for SEV-enabled guest
Documentation: KVM: Add SPDX-License-Identifier tag
selftests: kvm: add tsc_scaling_sync to .gitignore
RISC-V: KVM: include missing hwcap.h into vcpu_fp
KVM: selftests: riscv: Fix alignment of the guest_hang() function
KVM: selftests: riscv: Set PTE A and D bits in VS-stage page table
RISC-V: KVM: Don't clear hgatp CSR in kvm_arch_vcpu_put()
selftests: KVM: Free the GIC FD when cleaning up in arch_timer
selftests: KVM: Don't leak GIC FD across dirty log test iterations
KVM: Don't create VM debugfs files outside of the VM directory
KVM: selftests: get-reg-list: Add KVM_REG_ARM_FW_REG(3)
KVM: avoid NULL pointer dereference in kvm_dirty_ring_push
KVM: arm64: selftests: Introduce vcpu_width_config
KVM: arm64: mixed-width check should be skipped for uninitialized vCPUs
KVM: arm64: vgic: Remove unnecessary type castings
KVM: arm64: Don't split hugepages outside of MMU write lock
KVM: arm64: Drop unneeded minor version check from PSCI v1.x handler
KVM: arm64: Actually prevent SMC64 SYSTEM_RESET2 from AArch32
KVM: arm64: Generally disallow SMC64 for AArch32 guests
...
struct stat (defined in arch/x86/include/uapi/asm/stat.h) has 32-bit
st_dev and st_rdev; struct compat_stat (defined in
arch/x86/include/asm/compat.h) has 16-bit st_dev and st_rdev followed by
a 16-bit padding.
This patch fixes struct compat_stat to match struct stat.
[ Historical note: the old x86 'struct stat' did have that 16-bit field
that the compat layer had kept around, but it was changes back in 2003
by "struct stat - support larger dev_t":
https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git/commit/?id=e95b2065677fe32512a597a79db94b77b90c968d
and back in those days, the x86_64 port was still new, and separate
from the i386 code, and had already picked up the old version with a
16-bit st_dev field ]
Note that we can't change compat_dev_t because it is used by
compat_loop_info.
Also, if the st_dev and st_rdev values are 32-bit, we don't have to use
old_valid_dev to test if the value fits into them. This fixes
-EOVERFLOW on filesystems that are on NVMe because NVMe uses the major
number 259.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: Andreas Schwab <schwab@linux-m68k.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
GS is now always a user segment, so there is no difference between user
and kernel registers.
Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lore.kernel.org/r/20220325153953.162643-2-brgerst@gmail.com
If memory allocation in cpu_initialize_context() fails then it will
bring up the VCPU and leave with the corresponding CPU bit set in
xen_cpu_initialized_map.
The following (presumably successful) CPU bring up will BUG in
xen_pv_cpu_up() because nothing for that VCPU would be initialized.
Clear the CPU bits, that were set in cpu_initialize_context() in case
the memory allocation fails.
[ bigeasy: Creating a patch from Boris' email. ]
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20220209080214.1439408-2-bigeasy@linutronix.de
UAPI Changes:
Cross-subsystem Changes:
Core Changes:
- atomic: Add atomic_print_state to private objects
- edid: Constify the EDID parsing API, rework of the API
- dma-buf: Add dma_resv_replace_fences, dma_resv_get_singleton, make
dma_resv_excl_fence private
- format: Support monochrome formats
- fbdev: fixes for cfb_imageblit and sys_imageblit, pagelist
corruption fix
- selftests: several small fixes
- ttm: Rework bulk move handling
Driver Changes:
- Switch all relevant drivers to drm_mode_copy or drm_mode_duplicate
- bridge: conversions to devm_drm_of_get_bridge and panel_bridge,
autosuspend for analogix_dp, audio support for it66121, DSI to DPI
support for tc358767, PLL fixes and I2C support for icn6211
- bridge_connector: Enable HPD if supported
- etnaviv: fencing improvements
- gma500: GEM and GTT improvements, connector handling fixes
- komeda: switch to plane reset helper
- mediatek: MIPI DSI improvements
- omapdrm: GEM improvements
- panel: DT bindings fixes for st7735r, few fixes for ssd130x, new
panels: ltk035c5444t, B133UAN01, NV3052C
- qxl: Allow to run on arm64
- sysfb: Kconfig rework, support for VESA graphic mode selection
- vc4: Add a tracepoint for CL submissions, HDMI YUV output,
HDMI and clock improvements
- virtio: Remove restriction of non-zero blob_flags,
- vmwgfx: support for CursorMob and CursorBypass 4, various
improvements and small fixes
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCYk6nlQAKCRDj7w1vZxhR
xaTTAP0ZeeXRWIYxFfmuEAUd3H4ztvr3cx/QU/85qMXQUM4gSgD/cvQHMeucrFlX
2Bafjzl/p1tQrth0HNOkSz85dABUUws=
=rJSD
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2022-04-07' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for 5.19:
UAPI Changes:
Cross-subsystem Changes:
Core Changes:
- atomic: Add atomic_print_state to private objects
- edid: Constify the EDID parsing API, rework of the API
- dma-buf: Add dma_resv_replace_fences, dma_resv_get_singleton, make
dma_resv_excl_fence private
- format: Support monochrome formats
- fbdev: fixes for cfb_imageblit and sys_imageblit, pagelist
corruption fix
- selftests: several small fixes
- ttm: Rework bulk move handling
Driver Changes:
- Switch all relevant drivers to drm_mode_copy or drm_mode_duplicate
- bridge: conversions to devm_drm_of_get_bridge and panel_bridge,
autosuspend for analogix_dp, audio support for it66121, DSI to DPI
support for tc358767, PLL fixes and I2C support for icn6211
- bridge_connector: Enable HPD if supported
- etnaviv: fencing improvements
- gma500: GEM and GTT improvements, connector handling fixes
- komeda: switch to plane reset helper
- mediatek: MIPI DSI improvements
- omapdrm: GEM improvements
- panel: DT bindings fixes for st7735r, few fixes for ssd130x, new
panels: ltk035c5444t, B133UAN01, NV3052C
- qxl: Allow to run on arm64
- sysfb: Kconfig rework, support for VESA graphic mode selection
- vc4: Add a tracepoint for CL submissions, HDMI YUV output,
HDMI and clock improvements
- virtio: Remove restriction of non-zero blob_flags,
- vmwgfx: support for CursorMob and CursorBypass 4, various
improvements and small fixes
[airlied: fixup conflict with newvision panel callbacks]
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220407085940.pnflvjojs4qw4b77@houat
The following WARN is triggered from kvm_vm_ioctl_set_clock():
WARNING: CPU: 10 PID: 579353 at arch/x86/kvm/../../../virt/kvm/kvm_main.c:3161 mark_page_dirty_in_slot+0x6c/0x80 [kvm]
...
CPU: 10 PID: 579353 Comm: qemu-system-x86 Tainted: G W O 5.16.0.stable #20
Hardware name: LENOVO 20UF001CUS/20UF001CUS, BIOS R1CET65W(1.34 ) 06/17/2021
RIP: 0010:mark_page_dirty_in_slot+0x6c/0x80 [kvm]
...
Call Trace:
<TASK>
? kvm_write_guest+0x114/0x120 [kvm]
kvm_hv_invalidate_tsc_page+0x9e/0xf0 [kvm]
kvm_arch_vm_ioctl+0xa26/0xc50 [kvm]
? schedule+0x4e/0xc0
? __cond_resched+0x1a/0x50
? futex_wait+0x166/0x250
? __send_signal+0x1f1/0x3d0
kvm_vm_ioctl+0x747/0xda0 [kvm]
...
The WARN was introduced by commit 03c0304a86bc ("KVM: Warn if
mark_page_dirty() is called without an active vCPU") but the change seems
to be correct (unlike Hyper-V TSC page update mechanism). In fact, there's
no real need to actually write to guest memory to invalidate TSC page, this
can be done by the first vCPU which goes through kvm_guest_time_update().
Reported-by: Maxim Levitsky <mlevitsk@redhat.com>
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20220407201013.963226-1-vkuznets@redhat.com>
Since current AVIC implementation cannot support encrypted memory,
inhibit AVIC for SEV-enabled guest.
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Message-Id: <20220408133710.54275-1-suravee.suthikulpanit@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sync up with v5.18-rc1, in particular to get 5e3094cfd9
("drm/i915/xehpsdv: Add has_flat_ccs to device info").
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
A microcode update on some Intel processors causes all TSX transactions
to always abort by default[*]. Microcode also added functionality to
re-enable TSX for development purposes. With this microcode loaded, if
tsx=on was passed on the cmdline, and TSX development mode was already
enabled before the kernel boot, it may make the system vulnerable to TSX
Asynchronous Abort (TAA).
To be on safer side, unconditionally disable TSX development mode during
boot. If a viable use case appears, this can be revisited later.
[*]: Intel TSX Disable Update for Selected Processors, doc ID: 643557
[ bp: Drop unstable web link, massage heavily. ]
Suggested-by: Andrew Cooper <andrew.cooper3@citrix.com>
Suggested-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Tested-by: Neelima Krishnan <neelima.krishnan@intel.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/347bd844da3a333a9793c6687d4e4eb3b2419a3e.1646943780.git.pawan.kumar.gupta@linux.intel.com
tsx_clear_cpuid() uses MSR_TSX_FORCE_ABORT to clear CPUID.RTM and
CPUID.HLE. Not all CPUs support MSR_TSX_FORCE_ABORT, alternatively use
MSR_IA32_TSX_CTRL when supported.
[ bp: Document how and why TSX gets disabled. ]
Fixes: 293649307e ("x86/tsx: Clear CPUID bits when TSX always force aborts")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Tested-by: Neelima Krishnan <neelima.krishnan@intel.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/5b323e77e251a9c8bcdda498c5cc0095be1e1d3c.1646943780.git.pawan.kumar.gupta@linux.intel.com
lib/kaslr.c is used by both the main kernel and the boot stub. It
includes asm/io.h which is supposed to be used in the main kernel. It
leads to build warnings like this with clang 13:
warning: implicit declaration of function 'outl' is invalid in C99 [-Wimplicit-function-declaration]
Replace <asm/io.h> with <asm/shared/io.h> which is suitable for both
cases.
Fixes: 1e8f93e183 ("x86: Consolidate port I/O helpers")
Reported-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220410200025.3stf4jjvwfe5oxew@box.shutemov.name
Various mm code calls nodes_weight() to check if any bit of a given
nodemask is set.
This can be done more efficiently with nodes_empty() because nodes_empty()
stops traversing the nodemask as soon as it finds first set bit, while
nodes_weight() counts all bits unconditionally.
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20220210224933.379149-26-yury.norov@gmail.com
In some cases, x86 code calls cpumask_weight() to check if any bit of a
given cpumask is set.
This can be done more efficiently with cpumask_empty() because
cpumask_empty() stops traversing the cpumask as soon as it finds first set
bit, while cpumask_weight() counts all bits unconditionally.
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Steve Wahl <steve.wahl@hpe.com>
Link: https://lore.kernel.org/r/20220210224933.379149-17-yury.norov@gmail.com
- Use local labels in the exception table macros to avoid symbol
conflicts with clang LTO builds
- A couple of fixes to objtool checking of the relatively newly added
SLS and IBT code
- Rename a local var in the WARN* macro machinery to prevent shadowing
-----BEGIN PGP SIGNATURE-----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=kMtP
-----END PGP SIGNATURE-----
Merge tag 'x86_urgent_for_v5.18_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Fix the MSI message data struct definition
- Use local labels in the exception table macros to avoid symbol
conflicts with clang LTO builds
- A couple of fixes to objtool checking of the relatively newly added
SLS and IBT code
- Rename a local var in the WARN* macro machinery to prevent shadowing
* tag 'x86_urgent_for_v5.18_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/msi: Fix msi message data shadow struct
x86/extable: Prefer local labels in .set directives
x86,bpf: Avoid IBT objtool warning
objtool: Fix SLS validation for kcov tail-call replacement
objtool: Fix IBT tail-call detection
x86/bug: Prevent shadowing in __WARN_FLAGS
x86/mm/tlb: Revert retpoline avoidance approach
- A couple of fixes to event encoding on Sapphire Rapids
- Pass event caps of inherited events so that perf doesn't fail wrongly at fork()
- Add support for a new Raptor Lake CPU
-----BEGIN PGP SIGNATURE-----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=ba3V
-----END PGP SIGNATURE-----
Merge tag 'perf_urgent_for_v5.18_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Borislav Petkov:
- A couple of fixes to cgroup-related handling of perf events
- A couple of fixes to event encoding on Sapphire Rapids
- Pass event caps of inherited events so that perf doesn't fail wrongly
at fork()
- Add support for a new Raptor Lake CPU
* tag 'perf_urgent_for_v5.18_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/core: Always set cpuctx cgrp when enable cgroup event
perf/core: Fix perf_cgroup_switch()
perf/core: Use perf_cgroup_info->active to check if cgroup is active
perf/core: Don't pass task around when ctx sched in
perf/x86/intel: Update the FRONTEND MSR mask on Sapphire Rapids
perf/x86/intel: Don't extend the pseudo-encoding to GP counters
perf/core: Inherit event_caps
perf/x86/uncore: Add Raptor Lake uncore support
perf/x86/msr: Add Raptor Lake CPU support
perf/x86/cstate: Add Raptor Lake support
perf/x86: Add Intel Raptor Lake support
the local_lock_* macros back to inline functions
- A couple of fixes to static call insn patching
-----BEGIN PGP SIGNATURE-----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=hSOc
-----END PGP SIGNATURE-----
Merge tag 'locking_urgent_for_v5.18_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fixes from Borislav Petkov:
- Allow the compiler to optimize away unused percpu accesses and change
the local_lock_* macros back to inline functions
- A couple of fixes to static call insn patching
* tag 'locking_urgent_for_v5.18_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
Revert "mm/page_alloc: mark pagesets as __maybe_unused"
Revert "locking/local_lock: Make the empty local_lock_*() function a macro."
x86/percpu: Remove volatile from arch_raw_cpu_ptr().
static_call: Remove __DEFINE_STATIC_CALL macro
static_call: Properly initialise DEFINE_STATIC_CALL_RET0()
static_call: Don't make __static_call_return0 static
x86,static_call: Fix __static_call_return0 for i386
Fix an issue with commit 1ce849c755 ("x86/PCI: Add support for the ALi
M1487 (IBC) PIRQ router") and correct ALi M1487 (IBC) PIRQ router link
value (`pirq' cookie) interpretation according to findings in the BIOS.
Credit to Nikolai Zhubr for the detective work as to the bit layout.
Fixes: 1ce849c755 ("x86/PCI: Add support for the ALi M1487 (IBC) PIRQ router")
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2203310013270.44113@angie.orcam.me.uk
Handle the $IRT PCI IRQ Routing Table format used by AMI for its BCP
(BIOS Configuration Program) external tool meant for tweaking BIOS
structures without the need to rebuild it from sources[1].
The $IRT format has been invented by AMI before Microsoft has come up
with its $PIR format and a $IRT table is therefore there in some systems
that lack a $PIR table, such as the DataExpert EXP8449 mainboard based
on the ALi FinALi 486 chipset (M1489/M1487), which predates DMI 2.0 and
cannot therefore be easily identified at run time.
Unlike with the $PIR format there is no alignment guarantee as to the
placement of the $IRT table, so scan the whole BIOS area bytewise.
Credit to Michal Necasek for helping me chase documentation for the
format.
References:
[1] "What is BCP? - AMI", <https://www.ami.com/what-is-bcp/>
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> # crosvm
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2203302228410.9038@angie.orcam.me.uk
PIRQ routing tables provided by the PCI BIOS usually specify the PCI
vendor:device ID as well as the bus address of the device implementing
the PIRQ router, e.g.:
PCI: Interrupt Routing Table found at 0xc00fde10
[...]
PCI: Attempting to find IRQ router for [8086:7000]
pci 0000:00:07.0: PIIX/ICH IRQ router [8086:7000]
however in some cases they do not, in which case we fail to match the
router handler, e.g.:
PCI: Interrupt Routing Table found at 0xc00fdae0
[...]
PCI: Attempting to find IRQ router for [0000:0000]
PCI: Interrupt router not found at 00:00
This is because we always match the vendor:device ID and the bus address
literally, even if they are all zeros.
Handle this case then and iterate over all PCI devices until we find a
matching router handler if the vendor ID given by the routing table is
the invalid value of zero:
PCI: Attempting to find IRQ router for [0000:0000]
PCI: Trying IRQ router for [1039:0496]
pci 0000:00:05.0: SiS85C497 IRQ router [1039:0496]
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Nikolai Zhubr <zhubr.2@gmail.com>
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2203302018570.9038@angie.orcam.me.uk
Verify that the PCI IRQ Routing Table header as well as individual slot
entries are all wholly contained within the BIOS memory area. Do not
even call the checksum calculator if the header would overrun the area
and then bail out early if any slot would.
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2203301735510.22465@angie.orcam.me.uk
The SiS 85C496/497 486 Green PC VESA/ISA/PCI Chipset has support for PCI
steering and the ELCR register implemented. These features are handled
by the SiS85C497 AT Bus Controller & Megacell (ATM) ISA bridge, however
the device is wired as a peer bridge directly to the host bus and has
its PCI configuration registers decoded at addresses 0x80-0xff by the
accompanying SiS85C496 PCI & CPU Memory Controller (PCM) host bridge[1].
Therefore we need to match on the host bridge's vendor and device ID.
Like with the SiS85C503 PIRQ router handle link value ranges of 1-4 and
0xc0-0xc3, corresponding respectively to PIRQ line numbers counted from
1 and link register PCI configuration space addresses.
References:
[1] "486 Green PC VESA/ISA/PCI Chipset, SiS 85C496/497", Rev 3.0,
Silicon Integrated Systems Corp., July 1995, Part IV, Section 3.
"PCI Configuration Space Registers (00h ~ FFh)", p. 114
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Nikolai Zhubr <zhubr.2@gmail.com>
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2203301610490.22465@angie.orcam.me.uk
In preparation to adding support for the SiS85C497 PIRQ router add `503'
to the names of SiS85C503 PIRQ router code entities so that they clearly
indicate which device they refer to.
Also restructure `sis_router_probe' such that new device IDs will be
just new switch cases.
No functional change.
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2203301610000.22465@angie.orcam.me.uk
Similarly to MP-tables PIRQ routing tables may not list devices behind
PCI-to-PCI bridges, leading to interrupt routing failures, e.g.:
pci 0000:00:07.0: PIIX/ICH IRQ router [8086:7000]
pci 0000:02:00.0: ignoring bogus IRQ 255
pci 0000:02:01.0: ignoring bogus IRQ 255
pci 0000:02:02.0: ignoring bogus IRQ 255
pci 0000:04:00.0: ignoring bogus IRQ 255
pci 0000:04:00.3: ignoring bogus IRQ 255
pci 0000:00:11.0: PCI INT A -> PIRQ 63, mask deb8, excl 0c20
pci 0000:00:11.0: PCI INT A -> newirq 0
PCI: setting IRQ 11 as level-triggered
pci 0000:00:11.0: found PCI INT A -> IRQ 11
pci 0000:00:11.0: sharing IRQ 11 with 0000:00:07.2
pci 0000:02:00.0: PCI INT A not found in routing table
pci 0000:02:01.0: PCI INT A not found in routing table
pci 0000:02:02.0: PCI INT A not found in routing table
pci 0000:04:00.0: PCI INT A not found in routing table
pci 0000:04:00.3: PCI INT D not found in routing table
pci 0000:06:05.0: PCI INT A not found in routing table
pci 0000:06:08.0: PCI INT A not found in routing table
pci 0000:06:08.1: PCI INT B not found in routing table
pci 0000:06:08.2: PCI INT C not found in routing table
and consequently non-working devices. Since PCI-to-PCI bridges have a
standardised way of routing interrupts by the means of swizzling do it
for configurations that use a PIRQ router as well, like with APIC-based
setups, and use the determined corresponding topmost bridge's interrupt
pin assignment to route a given device's interrupt:
pci 0000:00:07.0: PIIX/ICH IRQ router [8086:7000]
pci 0000:02:00.0: ignoring bogus IRQ 255
pci 0000:02:01.0: ignoring bogus IRQ 255
pci 0000:02:02.0: ignoring bogus IRQ 255
pci 0000:04:00.0: ignoring bogus IRQ 255
pci 0000:04:00.3: ignoring bogus IRQ 255
pci 0000:00:11.0: PCI INT A -> PIRQ 63, mask deb8, excl 0c20
pci 0000:00:11.0: PCI INT A -> newirq 0
PCI: setting IRQ 11 as level-triggered
pci 0000:00:11.0: found PCI INT A -> IRQ 11
pci 0000:00:11.0: sharing IRQ 11 with 0000:00:07.2
pci 0000:02:00.0: using bridge 0000:00:11.0 INT A to get INT A
pci 0000:00:11.0: sharing IRQ 11 with 0000:02:00.0
pci 0000:02:01.0: using bridge 0000:00:11.0 INT B to get INT A
pci 0000:02:02.0: using bridge 0000:00:11.0 INT C to get INT A
pci 0000:04:00.0: using bridge 0000:00:11.0 INT B to get INT A
pci 0000:04:00.3: using bridge 0000:00:11.0 INT A to get INT D
pci 0000:00:11.0: sharing IRQ 11 with 0000:04:00.3
pci 0000:06:05.0: using bridge 0000:00:11.0 INT D to get INT A
pci 0000:06:08.0: using bridge 0000:00:11.0 INT C to get INT A
pci 0000:06:08.1: using bridge 0000:00:11.0 INT D to get INT B
pci 0000:06:08.2: using bridge 0000:00:11.0 INT A to get INT C
pci 0000:00:11.0: sharing IRQ 11 with 0000:06:08.2
pci 0000:02:01.0: using bridge 0000:00:11.0 INT B to get INT A
pci 0000:02:01.0: PCI INT A -> PIRQ 60, mask deb8, excl 0c20
pci 0000:02:01.0: PCI INT A -> newirq 0
PCI: setting IRQ 10 as level-triggered
pci 0000:02:01.0: found PCI INT A -> IRQ 10
pci 0000:02:01.0: sharing IRQ 10 with 0000:00:14.0
pci 0000:02:00.0: using bridge 0000:00:11.0 INT A to get INT A
pci 0000:02:01.0: using bridge 0000:00:11.0 INT B to get INT A
pci 0000:02:02.0: using bridge 0000:00:11.0 INT C to get INT A
pci 0000:04:00.0: using bridge 0000:00:11.0 INT B to get INT A
pci 0000:02:01.0: sharing IRQ 10 with 0000:04:00.0
pci 0000:04:00.3: using bridge 0000:00:11.0 INT A to get INT D
pci 0000:06:05.0: using bridge 0000:00:11.0 INT D to get INT A
pci 0000:06:08.0: using bridge 0000:00:11.0 INT C to get INT A
pci 0000:06:08.1: using bridge 0000:00:11.0 INT D to get INT B
pci 0000:06:08.2: using bridge 0000:00:11.0 INT A to get INT C
pci 0000:02:02.0: using bridge 0000:00:11.0 INT C to get INT A
pci 0000:02:02.0: PCI INT A -> PIRQ 61, mask deb8, excl 0c20
pci 0000:02:02.0: PCI INT A -> newirq 0
PCI: setting IRQ 5 as level-triggered
pci 0000:02:02.0: found PCI INT A -> IRQ 5
pci 0000:02:02.0: sharing IRQ 5 with 0000:00:13.0
pci 0000:02:00.0: using bridge 0000:00:11.0 INT A to get INT A
pci 0000:02:01.0: using bridge 0000:00:11.0 INT B to get INT A
pci 0000:02:02.0: using bridge 0000:00:11.0 INT C to get INT A
pci 0000:04:00.0: using bridge 0000:00:11.0 INT B to get INT A
pci 0000:04:00.3: using bridge 0000:00:11.0 INT A to get INT D
pci 0000:06:05.0: using bridge 0000:00:11.0 INT D to get INT A
pci 0000:06:08.0: using bridge 0000:00:11.0 INT C to get INT A
pci 0000:02:02.0: sharing IRQ 5 with 0000:06:08.0
pci 0000:06:08.1: using bridge 0000:00:11.0 INT D to get INT B
pci 0000:06:08.2: using bridge 0000:00:11.0 INT A to get INT C
pci 0000:06:05.0: using bridge 0000:00:11.0 INT D to get INT A
pci 0000:06:05.0: PCI INT A -> PIRQ 62, mask deb8, excl 0c20
pci 0000:06:05.0: PCI INT A -> newirq 0
pci 0000:06:05.0: found PCI INT A -> IRQ 5
pci 0000:06:05.0: sharing IRQ 5 with 0000:00:12.0
pci 0000:02:00.0: using bridge 0000:00:11.0 INT A to get INT A
pci 0000:02:01.0: using bridge 0000:00:11.0 INT B to get INT A
pci 0000:02:02.0: using bridge 0000:00:11.0 INT C to get INT A
pci 0000:04:00.0: using bridge 0000:00:11.0 INT B to get INT A
pci 0000:04:00.3: using bridge 0000:00:11.0 INT A to get INT D
pci 0000:06:05.0: using bridge 0000:00:11.0 INT D to get INT A
pci 0000:06:08.0: using bridge 0000:00:11.0 INT C to get INT A
pci 0000:06:08.1: using bridge 0000:00:11.0 INT D to get INT B
pci 0000:06:05.0: sharing IRQ 5 with 0000:06:08.1
pci 0000:06:08.2: using bridge 0000:00:11.0 INT A to get INT C
Adjust log messages accordingly.
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2203301538440.22465@angie.orcam.me.uk
Contrary to the PCI BIOS specification[1] some systems include the PCI
function number for onboard devices in their $PIR table. Consequently
the wrong entry can be matched leading to interrupt routing failures.
For example the Tyan Tomcat IV S1564D board has:
00:07.1 slot=00
0:00/deb8
1:00/deb8
2:00/deb8
3:00/deb8
00:07.2 slot=00
0:00/deb8
1:00/deb8
2:00/deb8
3:63/deb8
for its IDE interface and USB controller functions of the 82371SB PIIX3
southbridge. Consequently the first entry matches causing the inability
to route the USB interrupt in the `noapic' mode, in which case we need
to rely on the interrupt line set by the BIOS:
uhci_hcd 0000:00:07.2: runtime IRQ mapping not provided by arch
uhci_hcd 0000:00:07.2: PCI INT D not routed
uhci_hcd 0000:00:07.2: enabling bus mastering
uhci_hcd 0000:00:07.2: UHCI Host Controller
uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:07.2: irq 11, io base 0x00006000
Try to match the PCI device and function combined then and if that fails
move on to PCI device matching only. Compliant systems will only have a
single $PIR table entry per PCI device, so this update does not change
the semantics with them, while systems that have several entries for
individual functions of a single PCI device each will match the correct
entry:
uhci_hcd 0000:00:07.2: runtime IRQ mapping not provided by arch
uhci_hcd 0000:00:07.2: PCI INT D -> PIRQ 63, mask deb8, excl 0c20
uhci_hcd 0000:00:07.2: PCI INT D -> newirq 11
uhci_hcd 0000:00:07.2: found PCI INT D -> IRQ 11
uhci_hcd 0000:00:07.2: sharing IRQ 11 with 0000:00:11.0
uhci_hcd 0000:00:07.2: enabling bus mastering
uhci_hcd 0000:00:07.2: UHCI Host Controller
uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:07.2: irq 11, io base 0x00006000
[1] "PCI BIOS Specification", Revision 2.1, PCI Special Interest Group,
August 26, 1994, Table 4-1 "Layout of IRQ routing table entry.", p.
12
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2203301536020.22465@angie.orcam.me.uk
Contrary to the PCI BIOS specification[1] some systems include the PCI
function number for motherboard devices in their $PIR table, e.g. this
is what the Tyan Tomcat IV S1564D board reports:
00:14 slot=01
0:60/deb8
1:61/deb8
2:62/deb8
3:63/deb8
00:13 slot=02
0:61/deb8
1:62/deb8
2:63/deb8
3:60/deb8
00:12 slot=03
0:62/deb8
1:63/deb8
2:60/deb8
3:61/deb8
00:11 slot=04
0:63/deb8
1:60/deb8
2:61/deb8
3:62/deb8
00:07 slot=00
0:00/deb8
1:00/deb8
2:00/deb8
3:00/deb8
00:07 slot=00
0:00/deb8
1:00/deb8
2:00/deb8
3:63/deb8
Print the function number then in the debug $PIR table dump:
00:14.0 slot=01
0:60/deb8
1:61/deb8
2:62/deb8
3:63/deb8
00:13.0 slot=02
0:61/deb8
1:62/deb8
2:63/deb8
3:60/deb8
00:12.0 slot=03
0:62/deb8
1:63/deb8
2:60/deb8
3:61/deb8
00:11.0 slot=04
0:63/deb8
1:60/deb8
2:61/deb8
3:62/deb8
00:07.1 slot=00
0:00/deb8
1:00/deb8
2:00/deb8
3:00/deb8
00:07.2 slot=00
0:00/deb8
1:00/deb8
2:00/deb8
3:63/deb8
References:
[1] "PCI BIOS Specification", Revision 2.1, PCI Special Interest Group,
August 26, 1994, Table 4-1 "Layout of IRQ routing table entry.", p.
12
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2203301534440.22465@angie.orcam.me.uk
It makes no sense to hide the address of the $PIR table in a debug dump:
PCI: Interrupt Routing Table found at 0x(ptrval)
let alone print its virtual address, given that this is a BIOS entity at
a fixed location in the system's memory map. Show the physical address
instead then, e.g.:
PCI: Interrupt Routing Table found at 0xfde10
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2203301532330.22465@angie.orcam.me.uk
ACPI firmware advertises PCI host bridge resources via PNP0A03 _CRS
methods. Some BIOSes include non-window address space in _CRS, and if we
allocate that non-window space for PCI devices, they don't work.
4dc2287c18 ("x86: avoid E820 regions when allocating address space")
works around this issue by clipping out any regions mentioned in the E820
table in the allocate_resource() path, but the implementation has a couple
issues:
- The clipping is done for *all* allocations, not just those for PCI
address space, and
- The clipping is done at each allocation instead of being done once when
setting up the host bridge windows.
Rework the implementation so we only clip PCI host bridge windows, and we
do it once when setting them up.
Example output changes:
BIOS-e820: [mem 0x00000000b0000000-0x00000000c00fffff] reserved
+ acpi PNP0A08:00: clipped [mem 0xc0000000-0xfebfffff window] to [mem 0xc0100000-0xfebfffff window] for e820 entry [mem 0xb0000000-0xc00fffff]
- pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window]
+ pci_bus 0000:00: root bus resource [mem 0xc0100000-0xfebfffff window]
Link: https://lore.kernel.org/r/20220304035110.988712-3-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
When remove_e820_regions() clips a resource because an E820 region overlaps
it, log a note in dmesg to add in debugging.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Replace the halt loop in handle_vc_boot_ghcb() with an
sev_es_terminate(). The HLT gives the system no indication the guest is
unhappy. The termination request will signal there was an error during
VC handling during boot.
[ bp: Update it to pass the reason set too. ]
Signed-off-by: Peter Gonda <pgonda@google.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Joerg Roedel <jroedel@suse.de>
Link: https://lore.kernel.org/r/20220317211913.1397427-1-pgonda@google.com
Eliminate anonymous module_init() and module_exit(), which can lead to
confusion or ambiguity when reading System.map, crashes/oops/bugs,
or an initcall_debug log.
Give each of these init and exit functions unique driver-specific
names to eliminate the anonymous names.
Example 1: (System.map)
ffffffff832fc78c t init
ffffffff832fc79e t init
ffffffff832fc8f8 t init
Example 2: (initcall_debug log)
calling init+0x0/0x12 @ 1
initcall init+0x0/0x12 returned 0 after 15 usecs
calling init+0x0/0x60 @ 1
initcall init+0x0/0x60 returned 0 after 2 usecs
calling init+0x0/0x9a @ 1
initcall init+0x0/0x9a returned 0 after 74 usecs
Fixes: 64b94ceae8 ("crypto: blowfish - add x86_64 assembly implementation")
Fixes: 676a38046f ("crypto: camellia-x86_64 - module init/exit functions should be static")
Fixes: 0b95ec56ae ("crypto: camellia - add assembler implementation for x86_64")
Fixes: 56d76c96a9 ("crypto: serpent - add AVX2/x86_64 assembler implementation of serpent cipher")
Fixes: b9f535ffe3 ("[CRYPTO] twofish: i586 assembly version")
Fixes: ff0a70fe05 ("crypto: twofish-x86_64-3way - module init/exit functions should be static")
Fixes: 8280daad43 ("crypto: twofish - add 3-way parallel x86_64 assembler implemention")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
Cc: Joachim Fritschi <jfritschi@freenet.de>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: linux-crypto@vger.kernel.org
Cc: x86@kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
While running inside virtual machine, the kernel can bypass cache
flushing. Changing sleep state in a virtual machine doesn't affect the
host system sleep state and cannot lead to data loss.
Before entering sleep states, the ACPI code flushes caches to prevent
data loss using the WBINVD instruction. This mechanism is required on
bare metal.
But, any use WBINVD inside of a guest is worthless. Changing sleep
state in a virtual machine doesn't affect the host system sleep state
and cannot lead to data loss, so most hypervisors simply ignore it.
Despite this, the ACPI code calls WBINVD unconditionally anyway.
It's useless, but also normally harmless.
In TDX guests, though, WBINVD stops being harmless; it triggers a
virtualization exception (#VE). If the ACPI cache-flushing WBINVD
were left in place, TDX guests would need handling to recover from
the exception.
Avoid using WBINVD whenever running under a hypervisor. This both
removes the useless WBINVDs and saves TDX from implementing WBINVD
handling.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20220405232939.73860-30-kirill.shutemov@linux.intel.com
The kernel interacts with each bare-metal IOAPIC with a special
MMIO page. When running under KVM, the guest's IOAPICs are
emulated by KVM.
When running as a TDX guest, the guest needs to mark each IOAPIC
mapping as "shared" with the host. This ensures that TDX private
protections are not applied to the page, which allows the TDX host
emulation to work.
ioremap()-created mappings such as virtio will be marked as
shared by default. However, the IOAPIC code does not use ioremap() and
instead uses the fixmap mechanism.
Introduce a special fixmap helper just for the IOAPIC code. Ensure
that it marks IOAPIC pages as "shared". This replaces
set_fixmap_nocache() with __set_fixmap() since __set_fixmap()
allows custom 'prot' values.
AMD SEV gets IOAPIC pages shared because FIXMAP_PAGE_NOCACHE has _ENC
bit clear. TDX has to set bit to share the page with the host.
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20220405232939.73860-29-kirill.shutemov@linux.intel.com
Intel TDX doesn't allow VMM to directly access guest private memory.
Any memory that is required for communication with the VMM must be
shared explicitly. The same rule applies for any DMA to and from the
TDX guest. All DMA pages have to be marked as shared pages. A generic way
to achieve this without any changes to device drivers is to use the
SWIOTLB framework.
The previous patch ("Add support for TDX shared memory") gave TDX guests
the _ability_ to make some pages shared, but did not make any pages
shared. This actually marks SWIOTLB buffers *as* shared.
Start returning true for cc_platform_has(CC_ATTR_GUEST_MEM_ENCRYPT) in
TDX guests. This has several implications:
- Allows the existing mem_encrypt_init() to be used for TDX which
sets SWIOTLB buffers shared (aka. "decrypted").
- Ensures that all DMA is routed via the SWIOTLB mechanism (see
pci_swiotlb_detect())
Stop selecting DYNAMIC_PHYSICAL_MASK directly. It will get set
indirectly by selecting X86_MEM_ENCRYPT.
mem_encrypt_init() is currently under an AMD-specific #ifdef. Move it to
a generic area of the header.
Co-developed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lkml.kernel.org/r/20220405232939.73860-28-kirill.shutemov@linux.intel.com
Intel TDX protects guest memory from VMM access. Any memory that is
required for communication with the VMM must be explicitly shared.
It is a two-step process: the guest sets the shared bit in the page
table entry and notifies VMM about the change. The notification happens
using MapGPA hypercall.
Conversion back to private memory requires clearing the shared bit,
notifying VMM with MapGPA hypercall following with accepting the memory
with AcceptPage hypercall.
Provide a TDX version of x86_platform.guest.* callbacks. It makes
__set_memory_enc_pgtable() work right in TDX guest.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20220405232939.73860-27-kirill.shutemov@linux.intel.com
In TDX guests, guest memory is protected from host access. If a guest
performs I/O, it needs to explicitly share the I/O memory with the host.
Make all ioremap()ed pages that are not backed by normal memory
(IORES_DESC_NONE or IORES_DESC_RESERVED) mapped as shared.
The permissions in PAGE_KERNEL_IO already work for "decrypted" memory
on AMD SEV/SME systems. That means that they have no need to make a
pgprot_decrypted() call.
TDX guests, on the other hand, _need_ change to PAGE_KERNEL_IO for
"decrypted" mappings. Add a pgprot_decrypted() for TDX.
Co-developed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20220405232939.73860-26-kirill.shutemov@linux.intel.com
Unlike regular VMs, TDX guests use the firmware hand-off wakeup method
to wake up the APs during the boot process. This wakeup model uses a
mailbox to communicate with firmware to bring up the APs. As per the
design, this mailbox can only be used once for the given AP, which means
after the APs are booted, the same mailbox cannot be used to
offline/online the given AP. More details about this requirement can be
found in Intel TDX Virtual Firmware Design Guide, sec titled "AP
initialization in OS" and in sec titled "Hotplug Device".
Since the architecture does not support any method of offlining the
CPUs, disable CPU hotplug support in the kernel.
Since this hotplug disable feature can be re-used by other VM guests,
add a new CC attribute CC_ATTR_HOTPLUG_DISABLED and use it to disable
the hotplug support.
Attempt to offline CPU will fail with -EOPNOTSUPP.
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20220405232939.73860-25-kirill.shutemov@linux.intel.com
There are a few MSRs and control register bits that the kernel
normally needs to modify during boot. But, TDX disallows
modification of these registers to help provide consistent security
guarantees. Fortunately, TDX ensures that these are all in the correct
state before the kernel loads, which means the kernel does not need to
modify them.
The conditions to avoid are:
* Any writes to the EFER MSR
* Clearing CR4.MCE
This theoretically makes the guest boot more fragile. If, for instance,
EFER was set up incorrectly and a WRMSR was performed, it will trigger
early exception panic or a triple fault, if it's before early
exceptions are set up. However, this is likely to trip up the guest
BIOS long before control reaches the kernel. In any case, these kinds
of problems are unlikely to occur in production environments, and
developers have good debug tools to fix them quickly.
Change the common boot code to work on TDX and non-TDX systems.
This should have no functional effect on non-TDX systems.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20220405232939.73860-24-kirill.shutemov@linux.intel.com
TDX guest requires CR0.NE to be set. Clearing the bit triggers #GP(0).
If CR0.NE is 0, the MS-DOS compatibility mode for handling floating-point
exceptions is selected. In this mode, the software exception handler for
floating-point exceptions is invoked externally using the processor’s
FERR#, INTR, and IGNNE# pins.
Using FERR# and IGNNE# to handle floating-point exception is deprecated.
CR0.NE=0 also limits newer processors to operate with one logical
processor active.
Kernel uses CR0_STATE constant to initialize CR0. It has NE bit set.
But during early boot kernel has more ad-hoc approach to setting bit
in the register. During some of this ad-hoc manipulation, CR0.NE is
cleared. This causes a #GP in TDX guests and makes it die in early boot.
Make CR0 initialization consistent, deriving the initial value of CR0
from CR0_STATE. Since CR0_STATE always has CR0.NE=1, this ensures that
CR0.NE is never 0 and avoids the #GP.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20220405232939.73860-23-kirill.shutemov@linux.intel.com
Secondary CPU startup is currently performed with something called
the "INIT/SIPI protocol". This protocol requires assistance from
VMMs to boot guests. As should be a familiar story by now, that
support can not be provded to TDX guests because TDX VMMs are
not trusted by guests.
To remedy this situation a new[1] "Multiprocessor Wakeup Structure"
has been added to to an existing ACPI table (MADT). This structure
provides the physical address of a "mailbox". A write to the mailbox
then steers the secondary CPU to the boot code.
Add ACPI MADT wake structure parsing support and wake support. Use
this support to wake CPUs whenever it is present instead of INIT/SIPI.
While this structure can theoretically be used on 32-bit kernels,
there are no 32-bit TDX guest kernels. It has not been tested and
can not practically *be* tested on 32-bit. Make it 64-bit only.
1. Details about the new structure can be found in ACPI v6.4, in the
"Multiprocessor Wakeup Structure" section.
Co-developed-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lkml.kernel.org/r/20220405232939.73860-22-kirill.shutemov@linux.intel.com
Historically, x86 platforms have booted secondary processors (APs)
using INIT followed by the start up IPI (SIPI) messages. In regular
VMs, this boot sequence is supported by the VMM emulation. But such a
wakeup model is fatal for secure VMs like TDX in which VMM is an
untrusted entity. To address this issue, a new wakeup model was added
in ACPI v6.4, in which firmware (like TDX virtual BIOS) will help boot
the APs. More details about this wakeup model can be found in ACPI
specification v6.4, the section titled "Multiprocessor Wakeup Structure".
Since the existing trampoline code requires processors to boot in real
mode with 16-bit addressing, it will not work for this wakeup model
(because it boots the AP in 64-bit mode). To handle it, extend the
trampoline code to support 64-bit mode firmware handoff. Also, extend
IDT and GDT pointers to support 64-bit mode hand off.
There is no TDX-specific detection for this new boot method. The kernel
will rely on it as the sole boot method whenever the new ACPI structure
is present.
The ACPI table parser for the MADT multiprocessor wake up structure and
the wakeup method that uses this structure will be added by the following
patch in this series.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20220405232939.73860-21-kirill.shutemov@linux.intel.com
KVM hypercalls use the VMCALL or VMMCALL instructions. Although the ABI
is similar, those instructions no longer function for TDX guests.
Make vendor-specific TDVMCALLs instead of VMCALL. This enables TDX
guests to run with KVM acting as the hypervisor.
Among other things, KVM hypercall is used to send IPIs.
Since the KVM driver can be built as a kernel module, export
tdx_kvm_hypercall() to make the symbols visible to kvm.ko.
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20220405232939.73860-20-kirill.shutemov@linux.intel.com
TDX guests cannot do port I/O directly. The TDX module triggers a #VE
exception to let the guest kernel emulate port I/O by converting them
into TDCALLs to call the host.
But before IDT handlers are set up, port I/O cannot be emulated using
normal kernel #VE handlers. To support the #VE-based emulation during
this boot window, add a minimal early #VE handler support in early
exception handlers. This is similar to what AMD SEV does. This is
mainly to support earlyprintk's serial driver, as well as potentially
the VGA driver.
The early handler only supports I/O-related #VE exceptions. Unhandled or
failed exceptions will be handled via early_fixup_exceptions() (like
normal exception failures). At runtime I/O-related #VE exceptions (along
with other types) handled by virt_exception_kernel().
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lkml.kernel.org/r/20220405232939.73860-19-kirill.shutemov@linux.intel.com
TDX hypervisors cannot emulate instructions directly. This includes
port I/O which is normally emulated in the hypervisor. All port I/O
instructions inside TDX trigger the #VE exception in the guest and
would be normally emulated there.
Use a hypercall to emulate port I/O. Extend the
tdx_handle_virt_exception() and add support to handle the #VE due to
port I/O instructions.
String I/O operations are not supported in TDX. Unroll them by declaring
CC_ATTR_GUEST_UNROLL_STRING_IO confidential computing attribute.
== Userspace Implications ==
The ioperm() facility allows userspace access to I/O instructions like
inb/outb. Among other things, this allows writing userspace device
drivers.
This series has no special handling for ioperm(). Users will be able to
successfully request I/O permissions but will induce a #VE on their
first I/O instruction which leads SIGSEGV. If this is undesirable users
can enable kernel lockdown feature with 'lockdown=integrity' kernel
command line option. It makes ioperm() fail.
More robust handling of this situation (denying ioperm() in all TDX
guests) will be addressed in follow-on work.
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20220405232939.73860-18-kirill.shutemov@linux.intel.com
Port I/O instructions trigger #VE in the TDX environment. In response to
the exception, kernel emulates these instructions using hypercalls.
But during early boot, on the decompression stage, it is cumbersome to
deal with #VE. It is cleaner to go to hypercalls directly, bypassing #VE
handling.
Hook up TDX-specific port I/O helpers if booting in TDX environment.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lkml.kernel.org/r/20220405232939.73860-17-kirill.shutemov@linux.intel.com
Port I/O instructions trigger #VE in the TDX environment. In response to
the exception, kernel emulates these instructions using hypercalls.
But during early boot, on the decompression stage, it is cumbersome to
deal with #VE. It is cleaner to go to hypercalls directly, bypassing #VE
handling.
Add a way to hook up alternative port I/O helpers in the boot stub with
a new pio_ops structure. For now, set the ops structure to just call
the normal I/O operation functions.
out*()/in*() macros redefined to use pio_ops callbacks. It eliminates
need in changing call sites. io_delay() changed to use port I/O helper
instead of inline assembly.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lkml.kernel.org/r/20220405232939.73860-16-kirill.shutemov@linux.intel.com
There are two implementations of port I/O helpers: one in the kernel and
one in the boot stub.
Move the helpers required for both to <asm/shared/io.h> and use the one
implementation everywhere.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20220405232939.73860-15-kirill.shutemov@linux.intel.com
Change port I/O helpers to use u8/u16/u32 instead of unsigned
char/short/int for values. Use u16 instead of int for port number.
It aligns the helpers with implementation in boot stub in preparation
for consolidation.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20220405232939.73860-14-kirill.shutemov@linux.intel.com
The early decompression code does port I/O for its console output. But,
handling the decompression-time port I/O demands a different approach
from normal runtime because the IDT required to support #VE based port
I/O emulation is not yet set up. Paravirtualizing I/O calls during
the decompression step is acceptable because the decompression code
doesn't have a lot of call sites to IO instruction.
To support port I/O in decompression code, TDX must be detected before
the decompression code might do port I/O. Detect whether the kernel runs
in a TDX guest.
Add an early_is_tdx_guest() interface to query the cached TDX guest
status in the decompression code.
TDX is detected with CPUID. Make cpuid_count() accessible outside
boot/cpuflags.c.
TDX detection in the main kernel is very similar. Move common bits
into <asm/shared/tdx.h>.
The actual port I/O paravirtualization will come later in the series.
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lkml.kernel.org/r/20220405232939.73860-13-kirill.shutemov@linux.intel.com
In non-TDX VMs, MMIO is implemented by providing the guest a mapping
which will cause a VMEXIT on access and then the VMM emulating the
instruction that caused the VMEXIT. That's not possible for TDX VM.
To emulate an instruction an emulator needs two things:
- R/W access to the register file to read/modify instruction arguments
and see RIP of the faulted instruction.
- Read access to memory where instruction is placed to see what to
emulate. In this case it is guest kernel text.
Both of them are not available to VMM in TDX environment:
- Register file is never exposed to VMM. When a TD exits to the module,
it saves registers into the state-save area allocated for that TD.
The module then scrubs these registers before returning execution
control to the VMM, to help prevent leakage of TD state.
- TDX does not allow guests to execute from shared memory. All executed
instructions are in TD-private memory. Being private to the TD, VMMs
have no way to access TD-private memory and no way to read the
instruction to decode and emulate it.
In TDX the MMIO regions are instead configured by VMM to trigger a #VE
exception in the guest.
Add #VE handling that emulates the MMIO instruction inside the guest and
converts it into a controlled hypercall to the host.
This approach is bad for performance. But, it has (virtually) no impact
on the size of the kernel image and will work for a wide variety of
drivers. This allows TDX deployments to use arbitrary devices and device
drivers, including virtio. TDX customers have asked for the capability
to use random devices in their deployments.
In other words, even if all of the work was done to paravirtualize all
x86 MMIO users and virtio, this approach would still be needed. There
is essentially no way to get rid of this code.
This approach is functional for all in-kernel MMIO users current and
future and does so with a minimal amount of code and kernel image bloat.
MMIO addresses can be used with any CPU instruction that accesses
memory. Address only MMIO accesses done via io.h helpers, such as
'readl()' or 'writeq()'.
Any CPU instruction that accesses memory can also be used to access
MMIO. However, by convention, MMIO access are typically performed via
io.h helpers such as 'readl()' or 'writeq()'.
The io.h helpers intentionally use a limited set of instructions when
accessing MMIO. This known, limited set of instructions makes MMIO
instruction decoding and emulation feasible in KVM hosts and SEV guests
today.
MMIO accesses performed without the io.h helpers are at the mercy of the
compiler. Compilers can and will generate a much more broad set of
instructions which can not practically be decoded and emulated. TDX
guests will oops if they encounter one of these decoding failures.
This means that TDX guests *must* use the io.h helpers to access MMIO.
This requirement is not new. Both KVM hosts and AMD SEV guests have the
same limitations on MMIO access.
=== Potential alternative approaches ===
== Paravirtualizing all MMIO ==
An alternative to letting MMIO induce a #VE exception is to avoid
the #VE in the first place. Similar to the port I/O case, it is
theoretically possible to paravirtualize MMIO accesses.
Like the exception-based approach offered here, a fully paravirtualized
approach would be limited to MMIO users that leverage common
infrastructure like the io.h macros.
However, any paravirtual approach would be patching approximately 120k
call sites. Any paravirtual approach would need to replace a bare memory
access instruction with (at least) a function call. With a conservative
overhead estimation of 5 bytes per call site (CALL instruction),
it leads to bloating code by 600k.
Many drivers will never be used in the TDX environment and the bloat
cannot be justified.
== Patching TDX drivers ==
Rather than touching the entire kernel, it might also be possible to
just go after drivers that use MMIO in TDX guests *and* are performance
critical to justify the effrort. Right now, that's limited only to virtio.
All virtio MMIO appears to be done through a single function, which
makes virtio eminently easy to patch.
This approach will be adopted in the future, removing the bulk of
MMIO #VEs. The #VE-based MMIO will remain serving non-virtio use cases.
Co-developed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20220405232939.73860-12-kirill.shutemov@linux.intel.com
In TDX guests, most CPUID leaf/sub-leaf combinations are virtualized
by the TDX module while some trigger #VE.
Implement the #VE handling for EXIT_REASON_CPUID by handing it through
the hypercall, which in turn lets the TDX module handle it by invoking
the host VMM.
More details on CPUID Virtualization can be found in the TDX module
specification, the section titled "CPUID Virtualization".
Note that VMM that handles the hypercall is not trusted. It can return
data that may steer the guest kernel in wrong direct. Only allow VMM
to control range reserved for hypervisor communication.
Return all-zeros for any CPUID outside the hypervisor range. It matches
CPU behaviour for non-supported leaf.
Co-developed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20220405232939.73860-11-kirill.shutemov@linux.intel.com
Use hypercall to emulate MSR read/write for the TDX platform.
There are two viable approaches for doing MSRs in a TD guest:
1. Execute the RDMSR/WRMSR instructions like most VMs and bare metal
do. Some will succeed, others will cause a #VE. All of those that
cause a #VE will be handled with a TDCALL.
2. Use paravirt infrastructure. The paravirt hook has to keep a list
of which MSRs would cause a #VE and use a TDCALL. All other MSRs
execute RDMSR/WRMSR instructions directly.
The second option can be ruled out because the list of MSRs was
challenging to maintain. That leaves option #1 as the only viable
solution for the minimal TDX support.
Kernel relies on the exception fixup machinery to handle MSR access
errors. #VE handler uses the same exception fixup code as #GP. It
covers MSR accesses along with other types of fixups.
For performance-critical MSR writes (like TSC_DEADLINE), future patches
will replace the WRMSR/#VE sequence with the direct TDCALL.
RDMSR and WRMSR specification details can be found in
Guest-Host-Communication Interface (GHCI) for Intel Trust Domain
Extensions (Intel TDX) specification, sec titled "TDG.VP.
VMCALL<Instruction.RDMSR>" and "TDG.VP.VMCALL<Instruction.WRMSR>".
Co-developed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20220405232939.73860-10-kirill.shutemov@linux.intel.com
The HLT instruction is a privileged instruction, executing it stops
instruction execution and places the processor in a HALT state. It
is used in kernel for cases like reboot, idle loop and exception fixup
handlers. For the idle case, interrupts will be enabled (using STI)
before the HLT instruction (this is also called safe_halt()).
To support the HLT instruction in TDX guests, it needs to be emulated
using TDVMCALL (hypercall to VMM). More details about it can be found
in Intel Trust Domain Extensions (Intel TDX) Guest-Host-Communication
Interface (GHCI) specification, section TDVMCALL[Instruction.HLT].
In TDX guests, executing HLT instruction will generate a #VE, which is
used to emulate the HLT instruction. But #VE based emulation will not
work for the safe_halt() flavor, because it requires STI instruction to
be executed just before the TDCALL. Since idle loop is the only user of
safe_halt() variant, handle it as a special case.
To avoid *safe_halt() call in the idle function, define the
tdx_guest_idle() and use it to override the "x86_idle" function pointer
for a valid TDX guest.
Alternative choices like PV ops have been considered for adding
safe_halt() support. But it was rejected because HLT paravirt calls
only exist under PARAVIRT_XXL, and enabling it in TDX guest just for
safe_halt() use case is not worth the cost.
Co-developed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lkml.kernel.org/r/20220405232939.73860-9-kirill.shutemov@linux.intel.com
Virtualization Exceptions (#VE) are delivered to TDX guests due to
specific guest actions which may happen in either user space or the
kernel:
* Specific instructions (WBINVD, for example)
* Specific MSR accesses
* Specific CPUID leaf accesses
* Access to specific guest physical addresses
Syscall entry code has a critical window where the kernel stack is not
yet set up. Any exception in this window leads to hard to debug issues
and can be exploited for privilege escalation. Exceptions in the NMI
entry code also cause issues. Returning from the exception handler with
IRET will re-enable NMIs and nested NMI will corrupt the NMI stack.
For these reasons, the kernel avoids #VEs during the syscall gap and
the NMI entry code. Entry code paths do not access TD-shared memory,
MMIO regions, use #VE triggering MSRs, instructions, or CPUID leaves
that might generate #VE. VMM can remove memory from TD at any point,
but access to unaccepted (or missing) private memory leads to VM
termination, not to #VE.
Similarly to page faults and breakpoints, #VEs are allowed in NMI
handlers once the kernel is ready to deal with nested NMIs.
During #VE delivery, all interrupts, including NMIs, are blocked until
TDGETVEINFO is called. It prevents #VE nesting until the kernel reads
the VE info.
TDGETVEINFO retrieves the #VE info from the TDX module, which also
clears the "#VE valid" flag. This must be done before anything else as
any #VE that occurs while the valid flag is set escalates to #DF by TDX
module. It will result in an oops.
Virtual NMIs are inhibited if the #VE valid flag is set. NMI will not be
delivered until TDGETVEINFO is called.
For now, convert unhandled #VE's (everything, until later in this
series) so that they appear just like a #GP by calling the
ve_raise_fault() directly. The ve_raise_fault() function is similar
to #GP handler and is responsible for sending SIGSEGV to userspace
and CPU die and notifying debuggers and other die chain users.
Co-developed-by: Sean Christopherson <sean.j.christopherson@intel.com>
Co-developed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lkml.kernel.org/r/20220405232939.73860-8-kirill.shutemov@linux.intel.com
TDX brings a new exception -- Virtualization Exception (#VE). Handling
of #VE structurally very similar to handling #GP.
Extract two helpers from exc_general_protection() that can be reused for
handling #VE.
No functional changes.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lkml.kernel.org/r/20220405232939.73860-7-kirill.shutemov@linux.intel.com
In TDX guests, by default memory is protected from host access. If a
guest needs to communicate with the VMM (like the I/O use case), it uses
a single bit in the physical address to communicate the protected/shared
attribute of the given page.
In the x86 ARCH code, __PHYSICAL_MASK macro represents the width of the
physical address in the given architecture. It is used in creating
physical PAGE_MASK for address bits in the kernel. Since in TDX guest,
a single bit is used as metadata, it needs to be excluded from valid
physical address bits to avoid using incorrect addresses bits in the
kernel.
Enable DYNAMIC_PHYSICAL_MASK to support updating the __PHYSICAL_MASK.
Co-developed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20220405232939.73860-6-kirill.shutemov@linux.intel.com
Confidential Computing (CC) features (like string I/O unroll support,
memory encryption/decryption support, etc) are conditionally enabled
in the kernel using cc_platform_has() API. Since TDX guests also need
to use these CC features, extend cc_platform_has() API and add TDX
guest-specific CC attributes support.
CC API also provides an interface to deal with encryption mask. Extend
it to cover TDX.
Details about which bit in the page table entry to be used to indicate
shared/private state is determined by using the TDINFO TDCALL.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20220405232939.73860-5-kirill.shutemov@linux.intel.com
