We want to unlock nv_devices_mutex in this error path as well.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Some Fermi's apparently alow allow 297MHz clocks, so create a parameter
which allows end-users to set it themselves until we have a reliable way
to determine the board's maximum pixel clocks.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Without this patch a pixel clock rate above 165 MHz on a TMDS link is
assumed to be dual link. This is true for DVI, but not for HDMI. HDMI
supports no dual link, but it supports pixel clock rates above 165 MHz.
Only activate Dual Link mode when it is actually possible and requested.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
[imirkin: check for hdmi monitor for computing proto, use sor ctrl to
enable extra config bit]
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Misc fixes for amdgpu and radeon for 4.5. The bulk of the changes
are smatch fixes and cleanups. This also includes the DP MST fixes
from Mykola. Beyond that some fixes from Christian to avoid -ENOMEM
errors in some corner cases in the CS ioctl, some suspend and resume
fixes, and some powerplay fixes.
* 'drm-next-4.5' of git://people.freedesktop.org/~agd5f/linux: (33 commits)
drm/radeon: fix trivial typo in warning message
radeon: r100: Silence 'may be used uninitialized' warnings
drm/amdgpu: add warning to amdgpu_bo_gpu_offset() v2
drm/amd/powerplay: implement power down asic task for CZ
drm/amd/powerplay: enable power down asic task. (v2)
drm/amd/powerplay: enable set boot state task
drm/amd/powerplay: add thermal control task when resume.
drm/amdgpu: fix hex/decimal bug when show gpu load.
drm/amdgpu: Show gpu load when display gpu performance for Fiji of VI.
drm/amdgpu: Show gpu load when display gpu performance for Ci.
drm/amd/powerplay: Reload and initialize the smc firmware on powerplay resume.
drm/amd/powerplay: add powerplay valid check to avoid null point. (v2)
drm/amd/powerplay: fix Smatch static checker warnings
drm/amd/powerplay: fix Smatch static checker warnings with indenting (v2)
drm/amd/powerplay: fix bug that NULL checks are reversed.
amdgpu/dce11: Add test for crtc < 0 to various DCEv11 functions
amdgpu/dce11: Remove division from dce_v11_0_vblank_wait()
amdgpu/vce3: Simplify vce_v3_0_hw_init and ensure both rings default to not ready.
amdgpu/vce3: Remove magic constants from harvest register masks.
amdgpu/vce3: Simplify vce_v3_0_process_interrupt()
...
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alexandre Demers <alexandre.f.demers@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
CC [M] drivers/gpu/drm/radeon/r100.o
In file included from drivers/gpu/drm/radeon/radeon_mode.h:37:0,
from drivers/gpu/drm/radeon/radeon.h:80,
from drivers/gpu/drm/radeon/r100.c:33:
drivers/gpu/drm/radeon/r100.c: In function 'r100_bandwidth_update':
include/drm/drm_fixed.h:64:13: warning: 'crit_point_ff.full' may be used uninitialized in this function [-Wmaybe-uninitialized]
u64 tmp = ((u64)A.full << 13);
^
drivers/gpu/drm/radeon/r100.c:3153:63: note: 'crit_point_ff.full' was declared here
fixed20_12 peak_disp_bw, mem_bw, pix_clk, pix_clk2, temp_ff, crit_point_ff;
^
drivers/gpu/drm/radeon/r100.c:3583:42: warning: 'disp_drain_rate.full' may be used uninitialized in this function [-Wmaybe-uninitialized]
temp_ff.full = read_return_rate.full - disp_drain_rate.full;
gcc version 5.3.1 20151219 (Ubuntu 5.3.1-4ubuntu1)
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Check if there really is a valid offset for the BO.
v2: user WARN_ON_ONCE
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com> (v1)
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v2: AGD: rebase on upstream
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In case CONFIG_DRM_AMD_POWERPLAY is defined and amdgpu.powerplay=0.
some functions in powrplay can also be called by DAL. and the input parameter is *adev.
if just check point not NULL was not enough and will lead to NULL point error.
V2: AGD: rebase on upstream
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1. return -1 instead of -ENOMEM
2. The struct type mismatch warnings.
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Ken Wang <Qingqing.Wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v2: AGD: rebase on upstream
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Ken Wang <Qingqing.Wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
&& was used instead of ||.
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Ken Wang <Qingqing.Wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We moved the module options from drm_drv.c to drm_irq.c in 1888299571
('drm: Move vblank related module options into drm_irq.c'). Let's move
the MODULE_PARM_DESC()s as well so they're together.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160108110045.GF32195@mwanda
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Add a dummy entry to CEA/HDMI mode tables so they can be indexed
directly using the VIC, avoiding a +1/-1 dance here and there. This adds
clarity to the error checking for various functions that return the VIC
on success and zero on failure; we can now explicitly check for 0
instead of just subtracting one from an unsigned type.
Also add drm_valid_cea_vic() and drm_valid_hdmi_vic() helpers for
checking valid VICs.
v2: add drm_valid_cea_vic and drm_valid_hdmi_vic helpers (Ville)
use { } instead of { 0 } for initializing the dummy modes
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1452252111-6439-1-git-send-email-jani.nikula@intel.com
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The hardware description macros define the mask and shifts the wrong
way around for the intended use, leading to the condition never being
true and the chip revision ending up with the wrong value.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Acked-by: Christian Gmeiner <christian.gmeiner@gmail.com>
drm/i915: Update connector_mask during readout, v2.
The connector_mask may be used any time during the non-atomic
.crtc_disable which is called before the full atomic state is
set up and needs to be accurate for that reason.
Changes since v1:
- Update connector_mask in readout_hw_state and add a comment.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/568D1C55.8010001@linux.intel.com
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
We have to drop a lock before returning -ENOMEM here.
Fixes: a8c21a5451 ('drm/etnaviv: add initial etnaviv DRM driver')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Add support for Synopsys DesignWare MIPI DSI controller which is
embedded in the rk3288 SoCs.
Signed-off-by: Chris Zhong <zyw@rock-chips.com>
Acked-by: Mark Yao <mark.yao@rock-chips.com>
add device tree bindings for rk3288 specific Synopsys DW MIPI DSI driver
Signed-off-by: Chris Zhong <zyw@rock-chips.com>
Acked-by: Rob Herring <robh@kernel.org>
Since the mipi dsi driver need to use the clock of vop to make the
calculation of Blanking. But sometimes the clock driver can not set a
accurate clock_rate for vop, get it by clk_round_rate before mode_set,
so we can get the true value.
Signed-off-by: Chris Zhong <zyw@rock-chips.com>
Acked-by: Mark Yao <mark.yao@rock-chips.com>
drm_gem_handle_delete() contains its own version of
drm_gem_object_release_handle(), so lets just call the release method
instead.
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1451986951-3703-2-git-send-email-chris@chris-wilson.co.uk
Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Good practice dictates that we do not leak stale information to our
callers, and should avoid overwriting an outparam on an error path.
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1451986951-3703-1-git-send-email-chris@chris-wilson.co.uk
Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Another pile of vfuncs from the old gpu.tmpl xml documentation that
I've forgotten to delete. I spotted a few more things to
clarify/extend in the new kerneldoc while going through this once
more.
v2: Spelling fixes (Thierry).
v3: More spelling fixes and use Thierry's proposal to clarify why
drivers need to validate modes both in ->mode_fixup and ->mode_valid.
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Thierry Reding <treding@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
We want this for consistency with existing page_flip semantics.
Since this spurred quite a discussion on IRC also document why we
reject event generation when the pipe is off: It's not that it's hard
to implement, but userspace has a track recording which proves that it's
way too easy to accidentally abuse and cause havoc. We want to make
sure userspace doesn't get away with that.
v2: Somehow thought we do reject events already, but that code only
existed in my imagination ... Also suggestions from Thierry.
Cc: Daniel Stone <daniels@collabora.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1449564561-3896-4-git-send-email-daniel.vetter@ffwll.ch
Unlike the handle, the name table uses a sleeping mutex rather than a
spinlock. The allocation is in a normal context, and we can use the
simpler sleeping gfp_t, rather than have to take from the atomic
reserves.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1451902261-25380-3-git-send-email-chris@chris-wilson.co.uk
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
We only need a single reference count for all handles (i.e. non-zero
obj->handle_count) and so can trim a few atomic operations by only
taking the reference on the first handle and dropping it after the last.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1451902261-25380-2-git-send-email-chris@chris-wilson.co.uk
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The current error path for failure when establishing a handle for a GEM
object is unbalance, e.g. we call object_close() without calling first
object_open(). Use the typical onion structure to only undo what has
been set up prior to the error.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
To be consistent with other DCE11 functions test for crtc < 0.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Mimics odd behaviour where (i++ % 100 == 0) is true in the first iteration of each loop...
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Simplified the ring test and added logic to ensure rings are marked not ready
by default.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
More LOC reductions in VCE3 code. This patch simplifies the is_idle and
wait_for_idle logic.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
The cast to uint8_t happens before the right shift so this always sets
.m3arb to zero. The cast is actually a no-op so we can remove it.
Fixes: 3bace35914 ('drm/amd/powerplay: add hardware manager sub-component')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This code is indented too far. Also we normally use spaces to align if
statement conditions.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
