Wang Qing reports that IS_ERR_OR_NULL() should be matched with
PTR_ERR_OR_ZERO(), not PTR_ERR().
As it turns out, the error path always returns an error code,
i.e. NULL is never returned.
Update the code accordingly - s/IS_ERR_OR_NULL/IS_ERR.
Reported-by: Wang Qing <wangqing@vivo.com>
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
At the time xts fallback tfm allocation fails the device struct
hasn't been enabled yet in the caam xts tfm's private context.
Fix this by using the device struct from xts algorithm's private context
or, when not available, by replacing dev_err with pr_err.
Fixes: 9d9b14dbe0 ("crypto: caam/jr - add fallback for XTS with more than 8B IV")
Fixes: 83e8aa9121 ("crypto: caam/qi - add fallback for XTS with more than 8B IV")
Fixes: 36e2d7cfdc ("crypto: caam/qi2 - add fallback for XTS with more than 8B IV")
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Reviewed-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Newer CAAM versions (Era 9+) support 16B IVs. Since for these devices
the HW limitation is no longer present newer version should process the
requests containing 16B IVs directly in hardware without using a fallback.
Signed-off-by: Andrei Botila <andrei.botila@nxp.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
XTS should not return succes when dealing with block length equal to zero.
This is different than the rest of the skcipher algorithms.
Fixes: 31bb2f0da1 ("crypto: caam - check zero-length input")
Cc: <stable@vger.kernel.org> # v5.4+
Signed-off-by: Andrei Botila <andrei.botila@nxp.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
CAAM accelerator only supports XTS-AES-128 and XTS-AES-256 since
it adheres strictly to the standard. All the other key lengths
are accepted and processed through a fallback as long as they pass
the xts_verify_key() checks.
Fixes: b189817cf7 ("crypto: caam/qi - add ablkcipher and authenc algorithms")
Cc: <stable@vger.kernel.org> # v4.12+
Signed-off-by: Andrei Botila <andrei.botila@nxp.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
A hardware limitation exists for CAAM until Era 9 which restricts
the accelerator to IVs with only 8 bytes. When CAAM has a lower era
a fallback is necessary to process 16 bytes IV.
Fixes: b189817cf7 ("crypto: caam/qi - add ablkcipher and authenc algorithms")
Cc: <stable@vger.kernel.org> # v4.12+
Signed-off-by: Andrei Botila <andrei.botila@nxp.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In case of bad key length, driver emits "key size mismatch" messages,
but only for xts(aes) algorithms.
Reduce verbosity by making them visible only when debugging.
This way crypto fuzz testing log cleans up a bit.
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.
Also, notice that, dynamic memory allocations won't be affected by
this change:
"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]
This issue was found with the help of Coccinelle.
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 7649773293 ("cxgb3/l2t: Fix undefined behaviour")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The CRYPTO_TFM_RES_BAD_KEY_LEN flag was apparently meant as a way to
make the ->setkey() functions provide more information about errors.
However, no one actually checks for this flag, which makes it pointless.
Also, many algorithms fail to set this flag when given a bad length key.
Reviewing just the generic implementations, this is the case for
aes-fixed-time, cbcmac, echainiv, nhpoly1305, pcrypt, rfc3686, rfc4309,
rfc7539, rfc7539esp, salsa20, seqiv, and xcbc. But there are probably
many more in arch/*/crypto/ and drivers/crypto/.
Some algorithms can even set this flag when the key is the correct
length. For example, authenc and authencesn set it when the key payload
is malformed in any way (not just a bad length), the atmel-sha and ccree
drivers can set it if a memory allocation fails, and the chelsio driver
sets it for bad auth tag lengths, not just bad key lengths.
So even if someone actually wanted to start checking this flag (which
seems unlikely, since it's been unused for a long time), there would be
a lot of work needed to get it working correctly. But it would probably
be much better to go back to the drawing board and just define different
return values, like -EINVAL if the key is invalid for the algorithm vs.
-EKEYREJECTED if the key was rejected by a policy like "no weak keys".
That would be much simpler, less error-prone, and easier to test.
So just remove this flag.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In the process of turning caam/qi into a library, the check of
MCFGR[QI] bit has been inadvertently dropped.
Fix the condition for DPAA 1.x QI detection, which should be:
MCFGR[QI] && !MCFGR[DPAA2]
A check in the library exit point is currently not needed,
since the list of registered algorithms is empty.
While here, silence the library initialization abort - since jr.c
calls it unconditionally.
Fixes: 1b46c90c8e ("crypto: caam - convert top level drivers to libraries")
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Fuzz testing uncovered an issue when |user key| > |derived key|.
Derived key generation has to be fixed in two cases:
1. Era >= 6 (DKP is available)
DKP cannot be used with immediate input key if |user key| > |derived key|,
since the resulting descriptor (after DKP execution) would be invalid -
having a few bytes from user key left in descriptor buffer
as incorrect opcodes.
Fix DKP usage both in standalone hmac and in authenc algorithms.
For authenc the logic is simplified, by always storing both virtual
and dma key addresses.
2. Era < 6
The same case (|user key| > |derived key|) fails when DKP
is not available.
Make sure gen_split_key() dma maps max(|user key|, |derived key|),
since this is an in-place (bidirectional) operation.
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Reviewed-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Check zero-length input, for skcipher algorithm, to solve the extra
tests. This is a valid operation, therefore the API will return no error.
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Reviewed-by: Horia Geanta <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Check assoclen to solve the extra tests that expect -EINVAL to be
returned when the associated data size is not valid.
Validated assoclen for RFC4106 and RFC4543 which expects an assoclen
of 16 or 20.
Based on seqiv, IPsec ESP and RFC4543/RFC4106 the assoclen is sizeof IP
Header (spi, seq_no, extended seq_no) and IV len. This can be 16 or 20
bytes.
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Reviewed-by: Horia Geanta <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Check authsize to solve the extra tests that expect -EINVAL to be
returned when the authentication tag size is not valid.
Validated authsize for GCM, RFC4106 and RFC4543.
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Reviewed-by: Horia Geanta <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Check key length to solve the extra tests that expect -EINVAL to be
returned when the key size is not valid.
Validated AES keylen for skcipher, ahash and aead.
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Reviewed-by: Horia Geanta <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
skcipher encryption might fail and in some cases, like (invalid) input
length smaller then block size, updating the IV would lead to a useless
IV copy in case hardware issued an error.
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Modify drive to provide a valid errno (and not the HW error ID)
to the user, via completion callbacks.
A "valid errno" is currently not explicitly mentioned in the docs,
however the error code is expected to match the one returned by the
generic SW implementation.
Note: in most error cases caam/qi and caam/qi2 returned -EIO; align all
caam drivers to return -EINVAL.
While here, ratelimit prints triggered by fuzz testing, such that
console is not flooded.
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Modify drivers to perform skcipher IV update using the crypto engine,
instead of performing the operation in SW.
Besides being more efficient, this also fixes IV update for CTR mode.
Output HW S/G table is appended with an entry pointing to the same
IV buffer used as input (which is now mapped BIDIRECTIONAL).
AS (Algorithm State) parameter of the OPERATION command is changed
from INIFINAL to INIT in descriptors used by ctr(aes), cbc(aes).
This is needed since in case FINAL bit is set, HW skips IV updating
in the Context Register for the last data block.
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Currently, conversion of SW S/G table into HW S/G layout relies on
nents returned by sg_nents_for_len(sg, len).
However this leaves the possibility of HW S/G referencing more data
then needed: since buffer length in HW S/G entries is filled using
sg_dma_len(sg), the last entry in HW S/G table might have a length
that is bigger than needed for the crypto request.
This way of S/G table conversion is fine, unless after converting a table
more entries have to be appended to the HW S/G table.
In this case, crypto engine would access data from the S/G entry having
the incorrect length, instead of advancing in the S/G table.
This situation doesn't exist, but the upcoming implementation of
IV update for skcipher algorithms needs to add a S/G entry after
req->dst S/G (corresponding to output IV).
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
caam_dump_sg() is only compiled in when DEBUG is defined, hence the
messages are debug messages. Remove the @level argument from
caam_dump_sg() and print all messages at debug level.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The CAAM driver used to put its debug messages inside #ifdef DEBUG and
then prints the messages at KERN_ERR level. Replace this with proper
functions printing at KERN_DEBUG level. The #ifdef DEBUG gets
unnecessary when the right functions are used.
This replaces:
- print_hex_dump(KERN_ERR ...) inside #ifdef DEBUG with
print_hex_dump_debug(...)
- dev_err() inside #ifdef DEBUG with dev_dbg()
- printk(KERN_ERR ...) inside #ifdef DEBUG with dev_dbg()
Some parts of the driver use these functions already, so it is only
consequent to use the debug function consistently.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Currently there is a mismatch b/w the ICID (Isolation Context ID) used
for DMA mapping keys and ICID used for accessing them.
-keys are DMA mapped using a job ring device, thus a job ring ICID
-keys are accessed from descriptors enqueued via Queue Interface,
thus using QI ICID
[Note: ICIDs of JRs, QI are configured by U-boot / other entity by:
-fixing up the corresponding job ring and controller DT nodes
-setting up corresponding caam ICID registers]
In order to avoid IOMMU faults, DMA map the key using the controller
device instead of a job ring device.
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use the controller device for caam/qi instead of allocating
a new platform device.
This is needed as a preparation to add support for working behind an
SMMU. A platform device allocated using platform_device_register_full()
is not completely set up - most importantly .dma_configure()
is not called.
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Currently we allow top level code, i.e. that which sits between the
low level (HW-specific) drivers and crypto API, to be built as several
drivers: caamalg, caamhash, caam_pkc, caamrng, caamalg_qi.
There is no advantage in this, more it interferes with adding support
for deferred probing (there are no corresponding devices and thus
no bus).
Convert these drivers and call init() / exit() manually at the right
time.
Move algorithms initialization at JR probe / remove time:
-the first probed JR registers the crypto algs
-the last removed JR unregisters the crypto algs
Note: caam_qi_init() is called before JR platform devices creation
(of_populate_bus()), such that QI interface is initialized when
the caam/qi algorithms are registered in the JR driver (by calling
caam_qi_algapi_init().
While here, fix the Kconfig entries under CRYPTO_DEV_FSL_CAAM_JR
to be aligned.
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
According to CAAM RM:
-crypto engine reads 4 S/G entries (64 bytes) at a time,
even if the S/G table has fewer entries
-it's the responsibility of the user / programmer to make sure
this HW behaviour has no side effect
The drivers do not take care of this currently, leading to IOMMU faults
when the S/G table ends close to a page boundary - since only one page
is DMA mapped, while CAAM's DMA engine accesses two pages.
Fix this by rounding up the number of allocated S/G table entries
to a multiple of 4.
Note that in case of two *contiguous* S/G tables, only the last table
might needs extra entries.
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When enabling IOMMU support, the following issue becomes visible
in the AEAD zero-length case.
Even though the output sequence length is set to zero, the crypto engine
tries to prefetch 4 S/G table entries (since SGF bit is set
in SEQ OUT PTR command - which is either generated in SW in case of
caam/jr or in HW in case of caam/qi, caam/qi2).
The DMA read operation will trigger an IOMMU fault since the address in
the SEQ OUT PTR is "dummy" (set to zero / not obtained via DMA API
mapping).
1. In case of caam/jr, avoid the IOMMU fault by clearing the SGF bit
in SEQ OUT PTR command.
2. In case of caam/qi - setting address, bpid, length to zero for output
entry in the compound frame has a special meaning (cf. CAAM RM):
"Output frame = Unspecified, Input address = Y. A unspecified frame is
indicated by an unused SGT entry (an entry in which the Address, Length,
and BPID fields are all zero). SEC obtains output buffers from BMan as
prescribed by the preheader."
Since no output buffers are needed, modify the preheader by setting
(ABS = 1, ADDBUF = 0):
-"ABS = 1 means obtain the number of buffers in ADDBUF (0 or 1) from
the pool POOL ID"
-ADDBUF: "If ABS is set, ADD BUF specifies whether to allocate
a buffer or not"
3. In case of caam/qi2, since engine:
-does not support FLE[FMT]=2'b11 ("unused" entry) mentioned in DPAA2 RM
-requires output entry to be present, even if not used
the solution chosen is to leave output frame list entry zeroized.
Fixes: 763069ba49 ("crypto: caam - handle zero-length AEAD output")
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The detection for DKP (Derived Key Protocol) relied on the value
of the setkey function. This was broken by the recent change which
added des3_aead_setkey.
This patch fixes this by introducing a new flag for DKP and setting
that where needed.
Fixes: 1b52c40919 ("crypto: caam - Forbid 2-key 3DES in FIPS mode")
Reported-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Tested-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch forbids the use of 2-key 3DES (K1 == K3) in FIPS mode.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Tested-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The of_find_device_by_node() takes a reference to the underlying device
structure, we should release that reference.
Fixes: 35af640386 ("crypto: caam - Check for CAAM block presence before registering with crypto layer")
Fixes: b189817cf7 ("crypto: caam/qi - add ablkcipher and authenc algorithms")
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Wen Yang <yellowriver2010@hotmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
unlikely has already included in IS_ERR(), so just
remove redundant likely/unlikely annotation.
Signed-off-by: Chengguang Xu <cgxu519@gmx.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Recent AEAD changes in testmgr framework introduced by commit
a0d608ee5e ("crypto: testmgr - unify the AEAD encryption and decryption test vectors")
uncovered an error in the CAAM drivers, since they don't correctly
handle the case when AEAD output length is zero.
Add checks to avoid feeding zero-length req->dst to DMA API.
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Era 10 changes the register map.
The updates that affect the drivers:
-new version registers are added
-DBG_DBG[deco_state] field is moved to a new register -
DBG_EXEC[19:16] @ 8_0E3Ch.
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Previously, a tree-wide change added SPDX license identifiers to
files lacking licensing information:
b24413180f ("License cleanup: add SPDX GPL-2.0 license identifier to files with no license")
To be consistent update the rest of the files:
-files with license specified by means of MODULE_LICENSE()
-files with complete license text
-Kconfig
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
There are two IV-related issues:
(1) crypto API does not guarantee to provide an IV buffer that is DMAable,
thus it's incorrect to DMA map it
(2) for in-place decryption, since ciphertext is overwritten with
plaintext, updated IV (req->info) will contain the last block of plaintext
(instead of the last block of ciphertext)
While these two issues could be fixed separately, it's straightforward
to fix both in the same time - by using the {ablkcipher,aead}_edesc
extended descriptor to store the IV that will be fed to the crypto engine;
this allows for fixing (2) by saving req->src[last_block] in req->info
directly, i.e. without allocating yet another temporary buffer.
A side effect of the fix is that it's no longer possible to have the IV
contiguous with req->src or req->dst.
Code checking for this case is removed.
Cc: <stable@vger.kernel.org> # 4.14+
Fixes: a68a193805 ("crypto: caam/qi - properly set IV after {en,de}crypt")
Link: http://lkml.kernel.org/r/20170113084620.GF22022@gondor.apana.org.au
Reported-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In caam/qi's aead_setkey we save pointers to the authenc keys in
a local variable of type struct crypto_authenc_keys and we don't
zeroize it after use. Fix this and don't leak pointers to the
authenc keys.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add support for AES working in Galois Counter Mode.
The following algorithms are added:
gcm(aes)
rfc4106(gcm(aes))
rfc4543(gcm(aes))
There is a limitation related to IV size, similar to the one present in
SW implementation (crypto/gcm.c):
The only IV size allowed is 12 bytes. It will be padded by HW to the right
with 0x0000_0001 (up to 16 bytes - AES block size), according to the
GCM specification.
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Crypto drivers are expected to return -EBADMSG in case of
ICV check (authentication) failure.
In this case it also makes sense to suppress the error message
in the QI dequeue callback.
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Offload split key generation in CAAM engine, using DKP.
DKP is supported starting with Era 6.
Note that the way assoclen is transmitted from the job descriptor
to the shared descriptor changes - DPOVRD register is used instead
of MATH3 (where available), since DKP protocol thrashes the MATH
registers.
The replacement of MDHA split key generation with DKP has the side
effect of the crypto engine writing the authentication key, and thus
the DMA mapping direction for the buffer holding the key has to change
from DMA_TO_DEVICE to DMA_BIDIRECTIONAL.
There are two cases:
-key is inlined in descriptor - descriptor buffer mapping changes
-key is referenced - key buffer mapping changes
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
ablkcipher shared descriptors are relatively small, thus there is enough
space for the key to be inlined.
Accordingly, there is no need to copy the key in ctx->key.
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Fix below warnings on ARMv7 by using %zu for printing size_t values:
drivers/crypto/caam/caamalg_qi.c: In function aead_edesc_alloc:
drivers/crypto/caam/caamalg_qi.c:417:17: warning: format %lu expects argument of type long unsigned int, but argument 4 has type unsigned int [-Wformat=]
sizeof(struct qm_sg_entry))
^
drivers/crypto/caam/caamalg_qi.c:672:16: note: in expansion of macro CAAM_QI_MAX_AEAD_SG
qm_sg_ents, CAAM_QI_MAX_AEAD_SG);
^
drivers/crypto/caam/caamalg_qi.c: In function ablkcipher_edesc_alloc:
drivers/crypto/caam/caamalg_qi.c:440:17: warning: format %lu expects argument of type long unsigned int, but argument 4 has type unsigned int [-Wformat=]
sizeof(struct qm_sg_entry))
^
drivers/crypto/caam/caamalg_qi.c:909:16: note: in expansion of macro CAAM_QI_MAX_ABLKCIPHER_SG
qm_sg_ents, CAAM_QI_MAX_ABLKCIPHER_SG);
^
drivers/crypto/caam/caamalg_qi.c: In function ablkcipher_giv_edesc_alloc:
drivers/crypto/caam/caamalg_qi.c:440:17: warning: format %lu expects argument of type long unsigned int, but argument 4 has type unsigned int [-Wformat=]
sizeof(struct qm_sg_entry))
^
drivers/crypto/caam/caamalg_qi.c:1062:16: note: in expansion of macro CAAM_QI_MAX_ABLKCIPHER_SG
qm_sg_ents, CAAM_QI_MAX_ABLKCIPHER_SG);
^
Fixes: eb9ba37dc1 ("crypto: caam/qi - handle large number of S/Gs case")
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
caam/qi frontend (i.e. caamalg_qi) mustn't be used in case it runs on a
DPAA2 part (this could happen when using a multiplatform kernel).
Fixes: 297b9cebd2 ("crypto: caam/jr - add support for DPAA2 parts")
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
sg_sw_sec4.h header is not used by caam/qi, thus remove its inclusion.
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Associated data (AD) length is read by CAAM from an S/G entry
that is initially filled by the GPP.
Accordingly, AD length has to be stored in CAAM endianness.
Fixes: b189817cf7 ("crypto: caam/qi - add ablkcipher and authenc algorithms")
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
For more than 16 S/G entries, driver currently corrupts memory
on ARMv8, see below KASAN log.
Note: this does not reproduce on PowerPC due to different (smaller)
cache line size - 64 bytes on PPC vs. 128 bytes on ARMv8.
One such use case is one of the cbc(aes) test vectors - with 8 S/G
entries and src != dst. Driver needs 1 (IV) + 2 x 8 = 17 entries,
which goes over the 16 S/G entries limit:
(CAAM_QI_MEMCACHE_SIZE - offsetof(struct ablkcipher_edesc, sgt)) /
sizeof(struct qm_sg_entry) = 256 / 16 = 16 S/Gs
Fix this by:
-increasing object size in caamqicache pool from 512 to 768; this means
the maximum number of S/G entries grows from (at least) 16 to 32
(again, for ARMv8 case of 128-byte cache line)
-add checks in the driver to fail gracefully (ENOMEM) in case the 32 S/G
entries limit is exceeded
==================================================================
BUG: KASAN: slab-out-of-bounds in ablkcipher_edesc_alloc+0x4ec/0xf60
Write of size 1 at addr ffff800021cb6003 by task cryptomgr_test/1394
CPU: 3 PID: 1394 Comm: cryptomgr_test Not tainted 4.12.0-rc7-next-20170703-00023-g72badbcc1ea7-dirty #26
Hardware name: LS1046A RDB Board (DT)
Call trace:
[<ffff20000808ac6c>] dump_backtrace+0x0/0x290
[<ffff20000808b014>] show_stack+0x14/0x1c
[<ffff200008d62c00>] dump_stack+0xa4/0xc8
[<ffff200008264e40>] print_address_description+0x110/0x26c
[<ffff200008265224>] kasan_report+0x1d0/0x2fc
[<ffff2000082637b8>] __asan_store1+0x4c/0x54
[<ffff200008b4884c>] ablkcipher_edesc_alloc+0x4ec/0xf60
[<ffff200008b49304>] ablkcipher_encrypt+0x44/0xcc
[<ffff20000848a61c>] skcipher_encrypt_ablkcipher+0x120/0x138
[<ffff200008495014>] __test_skcipher+0xaec/0xe30
[<ffff200008497088>] test_skcipher+0x6c/0xd8
[<ffff200008497154>] alg_test_skcipher+0x60/0xe4
[<ffff2000084974c4>] alg_test.part.13+0x130/0x304
[<ffff2000084976d4>] alg_test+0x3c/0x68
[<ffff2000084938ac>] cryptomgr_test+0x54/0x5c
[<ffff20000810276c>] kthread+0x188/0x1c8
[<ffff2000080836c0>] ret_from_fork+0x10/0x50
Allocated by task 1394:
save_stack_trace_tsk+0x0/0x1ac
save_stack_trace+0x18/0x20
kasan_kmalloc.part.5+0x48/0x110
kasan_kmalloc+0x84/0xa0
kasan_slab_alloc+0x14/0x1c
kmem_cache_alloc+0x124/0x1e8
qi_cache_alloc+0x28/0x58
ablkcipher_edesc_alloc+0x244/0xf60
ablkcipher_encrypt+0x44/0xcc
skcipher_encrypt_ablkcipher+0x120/0x138
__test_skcipher+0xaec/0xe30
test_skcipher+0x6c/0xd8
alg_test_skcipher+0x60/0xe4
alg_test.part.13+0x130/0x304
alg_test+0x3c/0x68
cryptomgr_test+0x54/0x5c
kthread+0x188/0x1c8
ret_from_fork+0x10/0x50
Freed by task 0:
(stack is not available)
The buggy address belongs to the object at ffff800021cb5e00
which belongs to the cache caamqicache of size 512
The buggy address is located 3 bytes to the right of
512-byte region [ffff800021cb5e00, ffff800021cb6000)
The buggy address belongs to the page:
page:ffff7e0000872d00 count:1 mapcount:0 mapping: (null)
index:0x0 compound_mapcount: 0
flags: 0xfffc00000008100(slab|head)
raw: 0fffc00000008100 0000000000000000 0000000000000000 0000000180190019
raw: dead000000000100 dead000000000200 ffff800931268200 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff800021cb5f00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ffff800021cb5f80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>ffff800021cb6000: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
^
ffff800021cb6080: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff800021cb6100: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
==================================================================
Fixes: b189817cf7 ("crypto: caam/qi - add ablkcipher and authenc algorithms")
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
