According to the IB protocol definition, the driver needs to show the
correct device information and the information will be queryed by device
attribute.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
In order to compatible with the third party RoCE device, The hardware
modify the set method for the ecn field of ip header in new hip08
version. The high 6bit of tclass be assigned for dscp field of packet.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The hip08 split two hardware version. The version id are 0x20 and 0x21
according to the PCI revison. The max size of extend sge of sq is limited
to 2M for 0x20 version and 8M for 0x21 version. It may be exceeded to 2M
according to the algorithm that compute the product of wqe count and
extend sge number of every wqe. But the product always less than 8M.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
It will print the warning when the MSB bit of SLID is not zero running
cm_req_handler function that test CM. It needs to fixed zero when test
RoCE device.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
When user issues a RDMA read and enables sq inline, it needs to report a
bad wr to user.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
It needs to include two special qps for every port. The hip08 have four
ports and the all reserved qp numbers are eight.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The ll parameter is not used in ib_modify_qp_is_ok(), so remove it.
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Fix to return a negative error code from the mthca_cmd_init() error
handling case instead of 0, as done elsewhere in this function.
Fixes: 80fd823873 ("[PATCH] IB/mthca: Encapsulate command interface init")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
After bfcb79fca1 ("PCI/ERR: Run error recovery callbacks for all affected
devices"), AER errors are always cleared by the PCI core and drivers don't
need to do it themselves.
Remove calls to pci_cleanup_aer_uncorrect_error_status() from device
driver error recovery functions.
Signed-off-by: Oza Pawandeep <poza@codeaurora.org>
[bhelgaas: changelog, remove PCI core changes, remove unused variables]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Subnet Management Packets (SMP) should exclusively use VL15 and their SL
is ignored (IBTA v1.3, Section 3.5.8.2). Therefore, when an SMP is posted,
the SL in the address handle can be set to 0 by a user
application. Consequently, when an address handle is created by the IB
core, some fields in struct rvt_ah may not be set correctly by using the
SL2SC and SC2VL tables at the time. Subsequently, when the request is post
sent, the incoming swqe may fail the validation check, resulting in the
rejection of the send request.
This patch fixes the problem by using VL15 for any validation, ignoring
the SL in the address handle.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Since Virtual Lanes BCT credits and MTU are set through separate MADs, we
have to ensure both are valid, and data VLs are ready for transmission
before we allow port transition to Armed state.
Fixes: 5e2d6764a7 ("IB/hfi1: Verify port data VLs credits on transition to Armed")
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Alex Estrin <alex.estrin@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This patch adds the static trace for resource wait.
Reviewed-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Current implementation allows each qp to have only one send engine. As
such, each qp has only one list to queue prebuilt packets when send engine
resources are not available. To improve performance, it is desired to
support multiple send engines for each qp.
This patch creates the framework to support two send engines
(two legs) for each qp for the TID RDMA protocol, which can be easily
extended to support more send engines. It achieves the goal by creating a
leg specific struct, iowait_work in the iowait struct, to hold the
work_struct and the tx_list as well as a pointer to the parent iowait
struct.
The hfi1_pkt_state now has an additional field to record the current legs
work structure and that is now passed to all egress waiters to determine
the leg that needs to wait via a new iowait helper. The APIs are adjusted
to use the new leg specific struct as required.
Many new and modified helpers are added to support this change.
Reviewed-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The driver-provided function check_send_wqe allows the hardware driver to
check and set up the incoming send wqe before it is inserted into the swqe
ring. This patch will rename it as setup_wqe to better reflect its
usage. In addition, this function is only called when all setup is
complete in rdmavt.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/infiniband/hw/hns/hns_roce_hw_v2.c: In function 'hns_roce_v2_post_send':
drivers/infiniband/hw/hns/hns_roce_hw_v2.c:194:35: warning:
variable 'dseg' set but not used [-Wunused-but-set-variable]
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Clang warns when one enumerated type is explicitly converted to another.
drivers/infiniband/hw/qedr/qedr_roce_cm.c:198:28: warning: implicit
conversion from enumeration type 'enum qed_roce_ll2_tx_dest' to
different enumeration type 'enum qed_ll2_tx_dest' [-Wenum-conversion]
ll2_tx_pkt.tx_dest = pkt->tx_dest;
~ ~~~~~^~~~~~~
1 warning generated.
Turns out that QED_ROCE_LL2_TX_DEST_NW and QED_ROCE_LL2_TX_DEST_LB are
only used once in the whole tree and QED_ROCE_LL2_TX_DEST_MAX is used
nowhere. Remove them and use the equivalent values from qed_ll2_tx_dest
in their place.
Reported-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Michal Kalderon <michal.kalderon@cavium.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
If a MAD packet has incorrect header information, the logic uses the reply
path to report the error. The reply path expects *resp_len to be set
prior to return. Unfortunately, *resp_len is set to 0 for this path.
This causes an incorrect response packet.
Fix by ensuring that the *resp_len is defaulted to the incoming packet
size (wc->bytes_len - sizeof(GRH)).
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
- Fix a long standing race bug when destroying comp_event file descriptors
- srp, hfi1, bnxt_re: Various driver crashes from missing validation and
other cases
- Fixes for regressions in patches merged this window in the gid cache,
devx, ucma and uapi.
-----BEGIN PGP SIGNATURE-----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=cjxG
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Jason writes:
"Second RDMA rc pull request
- Fix a long standing race bug when destroying comp_event file descriptors
- srp, hfi1, bnxt_re: Various driver crashes from missing validation
and other cases
- Fixes for regressions in patches merged this window in the gid
cache, devx, ucma and uapi."
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/core: Set right entry state before releasing reference
IB/mlx5: Destroy the DEVX object upon error flow
IB/uverbs: Free uapi on destroy
RDMA/bnxt_re: Fix system crash during RDMA resource initialization
IB/hfi1: Fix destroy_qp hang after a link down
IB/hfi1: Fix context recovery when PBC has an UnsupportedVL
IB/hfi1: Invalid user input can result in crash
IB/hfi1: Fix SL array bounds check
RDMA/uverbs: Fix validity check for modify QP
IB/srp: Avoid that sg_reset -d ${srp_device} triggers an infinite loop
ucma: fix a use-after-free in ucma_resolve_ip()
RDMA/uverbs: Atomically flush and mark closed the comp event queue
cxgb4: fix abort_req_rss6 struct
IB has additional protections with SELinux that cannot be extended to the
DEVX domain. SELinux can restrict access to pkeys. The first version of
DEVX blocked IB entirely until this could be understood.
Since DEVX requires CAP_NET_RAW, it supersedes the SELinux restriction and
allows userspace to form arbitrary packets with arbitrary pkeys.
Thus we enable IB for DEVX when CAP_NET_RAW is given.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Enable DEVX white list commands without the need for CAP_NET_RAW.
DEVX uid must exist from the ucontext or the device so that the firmware
will mask unprivileged capabilities.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Manage device uid for DEVX white list commands. The created device uid
will be used on white list commands if the user didn't supply its own uid.
This will enable the firmware to filter out non privileged functionality
as of the recognition of the uid.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Expose RAW QP device handles to user space by extending the UHW part of
mlx5_ib_create_qp_resp.
This data is returned only when DEVX context is used where it may be
applicable.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Trivial fix to spelling mistake in dev_err error message
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The UnsupportedVL SendCtrl register bit information is defined in
the module rather than the chip register header file.
Move the defines to the appropriate header file.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The inner check for mdev->mthca_flags & MTHCA_FLAG_MSI_X is redundant
as this is already true because of the previous identical check in
an outer if statement. Remove it
Detected by cppcheck:
(warning) Identical inner 'if' condition is always true.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This patch adds memory window (mw) support in the kernel space.
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
According to the hardware modification, the vlan of the UD packet is based
on the ud_vlan_en field of the UD wqe to determine whether to add a vlan
header to the UD packet. The ud_vlan_en field is filled by the driver
according to the net device.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This patch mainly sets the vlan_id field in the WC for rdma_listen() to
work over vlan. This is required by ib_init_ah_attr_from_wc() which is
called by the CM REQ handler.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This patch adds atomic operations for hip08, includes fetchadd and cmpswap
operation. In order to enable atomic, the driver needs to do the
following steps:
1. Enable the atomic caps for RoCE device
2. Post the wqe context of atomic type
3. Configure the atomic type of mtpt
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Currently the transport opcodes which come from users configuration is set
by similar code. This patch simplifies it.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
These return the same thing but dev_name is a more conventional use of the
kernel API.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Kernel convention is that a driver for a subsystem will print using
dev_* on the subsystem's struct device, or with dev_* on the physical
device. Drivers should rarely use a pr_* function.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The current code has two copies of the device name, ibdev->dev and
dev_name(&ibdev->dev), and they are setup at different times, which is
very confusing.
Set them both up at the same time and make dev_name() the lead name, which
is the proper use of the driver core APIs. To make it very clear that the
name is not valid until registration pass it in to the
ib_register_device() call rather than messing with ibdev->name directly.
Also the reorganization now checks that dev_name is unique even if it does
not contain a %.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Acked-by: Adit Ranadive <aditr@vmware.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Acked-by: Devesh Sharma <devesh.sharma@broadcom.com>
Reviewed-by: Shiraz Saleem <shiraz.saleem@intel.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
The mlx4 driver produces a link error when it is configured
as built-in while CONFIG_INFINIBAND_USER_ACCESS is set to =m:
drivers/infiniband/hw/mlx4/main.o: In function `mlx4_ib_mmap':
main.c:(.text+0x1af4): undefined reference to `rdma_user_mmap_io'
The same function is called from mlx5, which already has a
dependency to ensure we can call it, and from hns, which
appears to suffer from the same problem.
This adds the same dependency that mlx5 uses to the other two.
Fixes: 6745d356ab ("RDMA/hns: Use rdma_user_mmap_io")
Fixes: c282da4109 ("RDMA/mlx4: Use rdma_user_mmap_io")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Upon DEVX object creation the object must be destroyed upon a follows
error flow.
Fixes: 7efce3691d ("IB/mlx5: Add obj create and destroy functionality")
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Clang warns when one enumerated type is implicitly converted to another.
drivers/infiniband/hw/cxgb4/qp.c:287:8: warning: implicit conversion
from enumeration type 'enum t4_bar2_qtype' to different enumeration type
'enum cxgb4_bar2_qtype' [-Wenum-conversion]
T4_BAR2_QTYPE_EGRESS,
^~~~~~~~~~~~~~~~~~~~
c4iw_bar2_addrs expects a value from enum cxgb4_bar2_qtype so use the
corresponding values from that type so Clang is satisfied without changing
the meaning of the code.
T4_BAR2_QTYPE_EGRESS = CXGB4_BAR2_QTYPE_EGRESS = 0
T4_BAR2_QTYPE_INGRESS = CXGB4_BAR2_QTYPE_INGRESS = 1
Reported-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Acked-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
When profiles were introduced to MLX5 IB an unneeded version print when
creating an MLX5 IB device was added. Remove the print, we still have a
printk for driver version in mlx5_ib_add().
Fixes: 16c1975f10 ("IB/mlx5: Create profile infrastructure to add and remove stages")
Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Trivial fix to spelling mistake in usnic_err error message.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Set valid umem bit on DEVX commands that use umem.
This will enforce the umem usage by the firmware and not the 'pas' info.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Set uid as part of TD commands so that the firmware can
manage the TD object in a secured way.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Set uid as part of XRCD commands so that the firmware can manage the
XRCD object in a secured way.
That will enable using an XRCD that was created by verbs application
to be used by the DEVX flow in case the uid is equal.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Set uid as part of CQ creation so that the firmware can manage the
CQ object in a secured way.
The uid for the destroy and the modify commands is set by mlx5_core.
This will enable using a CQ that was created by verbs application to
be used by the DEVX flow in case the uid is equal.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Set uid as part of PD allocation, this uid is used for other mlx5
objects upon calling the firmware.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Set uid as part of RQT commands so that the firmware can manage the
RQT object in a secured way.
That will enable using an RQT that was created by verbs application
to be used by the DEVX flow in case the uid is equal.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Set uid as part of TIS commands so that the firmware can manage the
TIS object in a secured way.
That will enable using a TIS that was created by verbs application
to be used by the DEVX flow in case the uid is equal.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Set uid as part of TIR commands so that the firmware can manage the
TIR object in a secured way.
That will enable using a TIR that was created by verbs application to
be used by the DEVX flow in case the uid is equal.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Set uid as part of MCG commands so that the firmware can manage the
MCG object in a secured way.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Set uid as part of DCT create command so that the firmware can
manage the DCT object in a secured way.
The uid for the destroy and drain commands are set by mlx5_core.
That will enable using a DCT that was created by verbs application
to be used by the DEVX flow in case the uid is equal.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Set uid as part of SRQ create command so that the firmware can manage
the SRQ object in a secured way.
The uid for the destroy and modify commands are set by mlx5_core.
That will enable using a SRQ that was created by verbs application
to be used by the DEVX flow in case the uid is equal.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Set uid as part of SQ commands so that the firmware can manage the
SQ object in a secured way.
The uid for the destroy command is set by mlx5_core.
This will enable using an SQ that was created by verbs application
to be used by the DEVX flow in case the uid is equal.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Set uid as part of RQ commands so that the firmware can manage the
RQ object in a secured way.
The uid for the destroy command is set by mlx5_core.
This will enable using an RQ that was created by verbs application to
be used by the DEVX flow in case the uid is equal.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Set uid as part of QP creation so that the firmware can manage the
QP object in a secured way.
The uid for the destroy and the modify commands is set by mlx5_core.
This will enable using a QP that was created by verbs application to
be used by the DEVX flow in case the uid is equal.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Use uid as part of PD commands so that the firmware can manage the
PD object in a secured way.
For example when a QP is created its uid must match the CQ uid which it
uses.
Next patches in this series will use the uid from the PD, then will come
a patch to set the uid on the PD so that all objects will be properly
work in one change.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
For dependencies, branch based on 'mlx5-next' of
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux.git
mlx5 mcast/ucast loopback control enhancements from Leon Romanovsky:
====================
This is short series from Mark which extends handling of loopback
traffic. Originally mlx5 IB dynamically enabled/disabled both unicast
and multicast based on number of users. However RAW ethernet QPs need
more granular access.
====================
Fixed failed automerge in mlx5_ib.h (minor context conflict issue)
mlx5-vport-loopback branch:
RDMA/mlx5: Enable vport loopback when user context or QP mandate
RDMA/mlx5: Allow creating RAW ethernet QP with loopback support
RDMA/mlx5: Refactor transport domain bookkeeping logic
net/mlx5: Rename incorrect naming in IFC file
Signed-off-by: Doug Ledford <dledford@redhat.com>
A user can create a QP which can accept loopback traffic, but that's not
enough. We need to enable loopback on the vport as well. Currently vport
loopback is enabled only when more than 1 users are using the IB device,
update the logic to consider whatever a QP which supports loopback was
created, if so enable vport loopback even if there is only a single user.
Signed-off-by: Mark Bloch <markb@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Expose two new flags:
MLX5_QP_FLAG_TIR_ALLOW_SELF_LB_UC
MLX5_QP_FLAG_TIR_ALLOW_SELF_LB_MC
Those flags can be used at creation time in order to allow a QP
to be able to receive loopback traffic (unicast and multicast).
We store the state in the QP to be used on the destroy path
to indicate with which flags the QP was created with.
Signed-off-by: Mark Bloch <markb@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
In preparation to enable loopback on a single user context move the logic
that enables/disables loopback to separate functions and group variables
under a single struct.
Signed-off-by: Mark Bloch <markb@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Remove a trailing underscore from the multicast/unicast names.
Signed-off-by: Mark Bloch <markb@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
kfree_skb has taken the null pointer into account. hence it is safe
to remove the redundant null pointer check before kfree_skb.
Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Acked-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Clang warns when more than one set of parentheses are used in single
conditional statements.
drivers/infiniband/hw/mlx4/mcg.c:676:16: warning: equality comparison
with extraneous parentheses [-Wparentheses-equality]
if ((method == IB_MGMT_METHOD_GET_RESP)) {
~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/infiniband/hw/mlx4/mcg.c:676:16: note: remove extraneous
parentheses around the comparison to silence this warning
if ((method == IB_MGMT_METHOD_GET_RESP)) {
~ ^ ~
drivers/infiniband/hw/mlx4/mcg.c:676:16: note: use '=' to turn this
equality comparison into an assignment
if ((method == IB_MGMT_METHOD_GET_RESP)) {
^~
=
Remove the unnecessary parentheses to silence this warning.
Reported-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Clang warns when more than one set of parentheses are used in single
conditional statements.
drivers/infiniband/hw/nes/nes_hw.c:1446:27: warning: equality comparison
with extraneous parentheses [-Wparentheses-equality]
} while ((temp_phy_data2 == temp_phy_data));
~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~
drivers/infiniband/hw/nes/nes_hw.c:1446:27: note: remove extraneous
parentheses around the comparison to silence this warning
} while ((temp_phy_data2 == temp_phy_data));
~ ^ ~
drivers/infiniband/hw/nes/nes_hw.c:1446:27: note: use '=' to turn this
equality comparison into an assignment
} while ((temp_phy_data2 == temp_phy_data));
^~
=
Remove the unnecessary parentheses to silence this warning.
Reported-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Since ODP had a single struct mmu_notifier located in the ucontext it
could only handle a single MM at a time, and this prevented it from using
the new owning_mm system.
With the prior rework it is now simple to let ODP track multiple MMs per
ucontext, finish the job so that the per_mm is allocated on a mm by mm
basis, and freed when the last umem is dropped from the ucontext.
As a side effect the new saner locking removes the lockdep splat about
nesting the umem_rwsem between mmu_notifier_unregister and
ib_umem_odp_release.
It also makes ODP work with multiple processes, across, fork, etc.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This is the first step to make ODP use the owning_mm that is now part of
struct ib_umem.
Each ODP umem is linked to a single per_mm structure, which in turn, is
linked to a single mm, via the embedded mmu_notifier. This first patch
introduces the structure and reworks eveything to use it.
This also needs to introduce tgid into the ib_ucontext_per_mm, as
get_user_pages_remote() requires the originating task for statistics
tracking.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This no longer has any use, we can use container_of to get to the
umem_odp, and a simple flag to indicate if this is an odp MR. Remove the
few remaining references to it.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
These two structures are linked together, use the container_of pattern
instead of a double allocation to make the code simpler and easier to
follow.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
All of these functions already require the ODP version of the umem struct,
make this very clear by having the signature require it. This paves the
way to using the container_of() pattern to link umem_odp and umem
together.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
rvt_destroy_qp() cannot complete until all in process packets have
been released from the underlying hardware. If a link down event
occurs, an application can hang with a kernel stack similar to:
cat /proc/<app PID>/stack
quiesce_qp+0x178/0x250 [hfi1]
rvt_reset_qp+0x23d/0x400 [rdmavt]
rvt_destroy_qp+0x69/0x210 [rdmavt]
ib_destroy_qp+0xba/0x1c0 [ib_core]
nvme_rdma_destroy_queue_ib+0x46/0x80 [nvme_rdma]
nvme_rdma_free_queue+0x3c/0xd0 [nvme_rdma]
nvme_rdma_destroy_io_queues+0x88/0xd0 [nvme_rdma]
nvme_rdma_error_recovery_work+0x52/0xf0 [nvme_rdma]
process_one_work+0x17a/0x440
worker_thread+0x126/0x3c0
kthread+0xcf/0xe0
ret_from_fork+0x58/0x90
0xffffffffffffffff
quiesce_qp() waits until all outstanding packets have been freed.
This wait should be momentary. During a link down event, the cleanup
handling does not ensure that all packets caught by the link down are
flushed properly.
This is caused by the fact that the freeze path and the link down
event is handled the same. This is not correct. The freeze path
waits until the HFI is unfrozen and then restarts PIO. A link down
is not a freeze event. The link down path cannot restart the PIO
until link is restored. If the PIO path is restarted before the link
comes up, the application (QP) using the PIO path will hang (until
link is restored).
Fix by separating the linkdown path from the freeze path and use the
link down path for link down events.
Close a race condition sc_disable() by acquiring both the progress
and release locks.
Close a race condition in sc_stop() by moving the setting of the flag
bits under the alloc lock.
Cc: <stable@vger.kernel.org> # 4.9.x+
Fixes: 7724105686 ("IB/hfi1: add driver files")
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
If a packet stream uses an UnsupportedVL (virtual lane), the send
engine will not send the packet, and it will not indicate that an
error has occurred. This will cause the packet stream to block.
HFI has 8 virtual lanes available for packet streams. Each lane can
be enabled or disabled using the UnsupportedVL mask. If a lane is
disabled, adding a packet to the send context must be disallowed.
The current mask for determining unsupported VLs defaults to 0 (allow
all). This is incorrect. Only the VLs that are defined should be
allowed.
Determine which VLs are disabled (mtu == 0), and set the appropriate
unsupported bit in the mask. The correct mask will allow the send
engine to error on the invalid VL, and error recovery will work
correctly.
Cc: <stable@vger.kernel.org> # 4.9.x+
Fixes: 7724105686 ("IB/hfi1: add driver files")
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Lukasz Odzioba <lukasz.odzioba@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The SL specified by a user needs to be a valid SL.
Add a range check to the user specified SL value which protects from
running off the end of the SL to SC table.
CC: stable@vger.kernel.org
Fixes: 7724105686 ("IB/hfi1: add driver files")
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Update this driver to match the code it copies from umem.c which no longer
uses tgid.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Rely on the new core code helper to map BAR memory from the driver.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Rely on the new core code helper to map BAR memory from the driver.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Rely on the new core code helper to map BAR memory from the driver.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
It will trigger unnecessary interrupts caused by time out if prints inside
aeq handle under some configurations. Thus, move all prints out of aeq
handle to work queue.
Signed-off-by: liuyixian <liuyixian@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Commit f27b4746f3 ("i40iw: add connection management code") uses an
incorrect rcu iterator, whilst holding the rtnl_lock. Since the
critical region invokes i40iw_manage_qhash(), which is a sleeping
function, the rcu locking and traversal cannot be used.
Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Two new tls tests added in parallel in both net and net-next.
Used Stephen Rothwell's linux-next resolution.
Signed-off-by: David S. Miller <davem@davemloft.net>
The transition is allowed from any state and the atrribute mask must be
IB_QP_STATE.
Fixes: c32a4f296e ("IB/mlx5: Add support for DC Initiator QP")
Signed-off-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Calling into the new API to reset the secondary bus results in a deadlock.
This occurs because the device/bus is already locked at probe time.
Reverting back to the old behavior while the API is improved.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=200985
Fixes: c6a44ba950 ("PCI: Rename pci_try_reset_bus() to pci_reset_bus()")
Fixes: 409888e096 ("IB/hfi1: Use pci_try_reset_bus() for initiating PCI Secondary Bus Reset")
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Cc: Sinan Kaya <okaya@codeaurora.org>
HFI IRQ enable bits are not being set correctly. Send context error and
DC IRQs are not being enabled correctly. In addition, send context error
IRQs are not being delivered.
Because of this, send context errors are not being handled correctly when
they occur.
When setting the IRQ bits, if an IRQ range is used, and the last bit is on
a register boundary (bit 63), the calculated index for the final register
modification is incorrect (index + 1 vs. index).
The incorrect index calculation causes incorrect IRQ bits to be set. In
this case the send context error IRQ is NOT enabled.
Fix by using the 'last' value rather than the counted 'src' value to
determine the final index to use. This satisfies all cases.
Fixes: a2f7bbdc2d ("IB/hfi1: Rework the IRQ API to be more flexible")
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
If the set_txreq_header_agh() function returns an error, the exit path
is chosen.
In this path, the code fails to set the return value. This will cause
the caller to not realize an error has occurred.
Set the return value correctly in the error path.
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Hardware limits the maximum number of packets to u16 packets.
Match that size for all relevant sequence numbers in the user_sdma
engine.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Packet queue state is over used to determine SDMA descriptor
availablitity and packet queue request state.
cpu 0 ret = user_sdma_send_pkts(req, pcount);
cpu 0 if (atomic_read(&pq->n_reqs))
cpu 1 IRQ user_sdma_txreq_cb calls pq_update() (state to _INACTIVE)
cpu 0 xchg(&pq->state, SDMA_PKT_Q_ACTIVE);
At this point pq->n_reqs == 0 and pq->state is incorrectly
SDMA_PKT_Q_ACTIVE. The close path will hang waiting for the state
to return to _INACTIVE.
This can also change the state from _DEFERRED to _ACTIVE. However,
this is a mostly benign race.
Remove the racy code path.
Use n_reqs to determine if a packet queue is active or not.
Reviewed-by: Mitko Haralanov <mitko.haralanov@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
pq_update() can only be called in two places: from the completion
function when the complete (npkts) sequence of packets has been
submitted and processed, or from setup function if a subset of the
packets were submitted (i.e. the error path).
Currently both paths can call pq_update() if an error occurrs. This
race will cause the n_req value to go negative, hanging file_close(),
or cause a crash by freeing the txlist more than once.
Several variables are used to determine SDMA send state. Most of
these are unnecessary, and have code inspectible races between the
setup function and the completion function, in both the send path and
the error path.
The request 'status' value can be set by the setup or by the
completion function. This is code inspectibly racy. Since the status
is not needed in the completion code or by the caller it has been
removed.
The request 'done' value races between usage by the setup and the
completion function. The completion function does not need this.
When the number of processed packets matches npkts, it is done.
The 'has_error' value races between usage of the setup and the
completion function. This can cause incorrect error handling and leave
the n_req in an incorrect value (i.e. negative).
Simplify the code by removing all of the unneeded state checks and
variables.
Clean up iovs node when it is freed.
Eliminate race conditions in the error path:
If all packets are submitted, the completion handler will set the
completion status correctly (ok or aborted).
If all packets are not submitted, the caller must wait until the
submitted packets have completed, and then set the completion status.
These two change eliminate the race condition in the error path.
Reviewed-by: Mitko Haralanov <mitko.haralanov@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The post_send() path determines if it should post directly or, schedule
the post for later. The current logic is:
if the swqe ring is empty or (for hfi1) wqe->length <= piothreshold
post the send
else
schedule
This can allow large requests to call the send engine directly. Large
requests can potentially produce a large number of packets prior to
returning to the caller, blocking the caller from posting more requests,
and allowing better parallel processing.
Allow the driver(s) more say in this logic (pass call_send to the driver,
rather than examining a return value).
Update hfi1/qib logic to schedule the send engine if an RC or UC message
is larger than the QP MTU size.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
debugfs_remove has taken the IS_ERR_OR_NULL into account. Just remove the
unnecessary condition.
Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Currently a matcher can only be created and attached to a NIC RX flow
table. Extend it to allow it on NIC TX flow tables as well.
In order to achieve that, we:
1) Expose a new attribute: MLX5_IB_ATTR_FLOW_MATCHER_FLOW_FLAGS.
enum ib_flow_flags is used as valid flags. Only
IB_FLOW_ATTR_FLAGS_EGRESS is supported.
2) Remove the requirement to have a DEVX or QP destination when creating a
flow. A flow added to NIC TX flow table will forward the packet outside
of the vport (Wire or E-Switch in the SR-iOV case).
Signed-off-by: Mark Bloch <markb@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Add the ability to get a NIC TX flow table when using _get_flow_table().
This will allow to create a matcher and a flow rule on the NIC TX path.
Signed-off-by: Mark Bloch <markb@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Support attaching flow actions to a flow rule via raw create flow.
For now only NIC RX path is supported. This change requires to export
flow resources management functions so we can maintain proper bookkeeping
of flow actions.
Signed-off-by: Mark Bloch <markb@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Move struct mlx5_flow_act to be passed from the method entry point,
this will allow to add support for flow action for the raw create flow
path.
Signed-off-by: Mark Bloch <markb@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
We support only a single action type per flow rule, in case the user passes
the same type of flow actions fail the flow creation.
Signed-off-by: Mark Bloch <markb@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Make the parsing of flow actions more generic so it could be used by
mlx5 raw create flow.
Signed-off-by: Mark Bloch <markb@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Use ib_set_flow() when initializing flow related resources.
Signed-off-by: Mark Bloch <markb@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Any matching rules will be mutated based on the packet reformat context
which is attached to that given flow rule.
Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
A L3_TUNNEL_TO_L2 decap flow action requires to enable the encap bit on
the flow table, enable it if supported. This will allow to attach those
flow actions to NIC RX steering. We don't enable if running on a
representor.
Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Any matching packet will be stripped of it's VXLAN tunnel, only the inner
L2 onward is left. The user will receive the decapsulated packet.
Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
