Commit Graph

271 Commits

Author SHA1 Message Date
Alexander Gordeev
6f1f411a23 tg3: Use pci_enable_msix_range() instead of pci_enable_msix()
As result of deprecation of MSI-X/MSI enablement functions
pci_enable_msix() and pci_enable_msi_block() all drivers
using these two interfaces need to be updated to use the
new pci_enable_msi_range() and pci_enable_msix_range()
interfaces.

Signed-off-by: Alexander Gordeev <agordeev@redhat.com>
Cc: Nithin Nayak Sujir <nsujir@broadcom.com>
Cc: Michael Chan <mchan@broadcom.com>
Cc: netdev@vger.kernel.org
Cc: linux-pci@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-18 15:33:29 -05:00
Nithin Sujir
c6993dfd7d tg3: Fix deadlock in tg3_change_mtu()
Quoting David Vrabel -
"5780 cards cannot have jumbo frames and TSO enabled together.  When
jumbo frames are enabled by setting the MTU, the TSO feature must be
cleared.  This is done indirectly by calling netdev_update_features()
which will call tg3_fix_features() to actually clear the flags.

netdev_update_features() will also trigger a new netlink message for the
feature change event which will result in a call to tg3_get_stats64()
which deadlocks on the tg3 lock."

tg3_set_mtu() does not need to be under the tg3 lock since converting
the flags to use set_bit(). Move it out to after tg3_netif_stop().

Reported-by: David Vrabel <david.vrabel@citrix.com>
Tested-by: David Vrabel <david.vrabel@citrix.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-06 20:05:36 -08:00
Dan Carpenter
c6e27f2f3c tg3: cleanup an error path in tg3_phy_reset_5703_4_5()
In the original code, if tg3_readphy() fails then it does an unnecessary
check to verify "err" is still zero and then returns -EBUSY.

My static checker complains about the unnecessary "if (!err)" check and
anyway it is better to propagate the -EBUSY error code from
tg3_readphy() instead of hard coding it here.  And really the original
code is confusing to look at.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Nithin Nayak Sujir <nsujir@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-06 20:05:36 -08:00
Paul Gortmaker
a81ab36bf5 drivers/net: delete non-required instances of include <linux/init.h>
None of these files are actually using any __init type directives
and hence don't need to include <linux/init.h>.   Most are just a
left over from __devinit and __cpuinit removal, or simply due to
code getting copied from one driver to the next.

This covers everything under drivers/net except for wireless, which
has been submitted separately.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-16 11:53:26 -08:00
David S. Miller
56a4342dfe Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflicts:
	drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c
	net/ipv6/ip6_tunnel.c
	net/ipv6/ip6_vti.c

ipv6 tunnel statistic bug fixes conflicting with consolidation into
generic sw per-cpu net stats.

qlogic conflict between queue counting bug fix and the addition
of multiple MAC address support.

Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-06 17:37:45 -05:00
Nithin Sujir
20170e7747 tg3: Update version to 3.136
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-03 20:59:52 -05:00
Nithin Sujir
1743b83c86 tg3: Poll cpmu link state on APE + ASF enabled devices
On ASF enabled devices where the mgmt firmware runs on the application
processing engine, there is a race between the tg3 driver processing a
link change event and the ASF firmware clearing the link changed bit in
the EMAC status register. This leads to link notifications to the driver
sometimes getting lost.

Poll the CPMU link state as a backup for the normal interrupt path
update if ASF is enabled.

Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-03 20:59:52 -05:00
Nithin Sujir
f82995b65c tg3: Set the MAC clock to the fastest speed during boot code load
On the 5717, 5718 and 5719 devices, the bootcode runs slower when any
port doesn't have a link due to clock speed slowing down as part of the
link-aware feature. This leads to the driver timing out waiting for the
bootcode signature.

This patch overrides the clock policy to the highest frequency just before
reset and restores it after the bootcode is up.

Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-03 20:59:52 -05:00
Michael Chan
e565eec31d tg3: Add unicast filtering support.
Up to 3 additional unicast addresses can be added to the perfect match
filter table.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-03 20:59:52 -05:00
Michael Chan
f022ae62dd tg3: Refactor __tg3_set_mac_addr()
so that individual MAC address filter entries can be set.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-03 20:59:51 -05:00
Nithin Sujir
375679104a tg3: Expand 4g_overflow_test workaround to skb fragments of any size.
The current driver assumes that an skb fragment can only be upto jumbo
size. Presumably this was a fast-path optimization. This assumption is
no longer true as fragments can be upto 32k.

v2: Remove unnecessary parantheses per Eric Dumazet.

Cc: stable@vger.kernel.org
Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-27 12:51:44 -05:00
David S. Miller
143c905494 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflicts:
	drivers/net/ethernet/intel/i40e/i40e_main.c
	drivers/net/macvtap.c

Both minor merge hassles, simple overlapping changes.

Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-18 16:42:06 -05:00
Nat Gurumoorthy
388d333557 tg3: Initialize REG_BASE_ADDR at PCI config offset 120 to 0
The new tg3 driver leaves REG_BASE_ADDR (PCI config offset 120)
uninitialized. From power on reset this register may have garbage in it. The
Register Base Address register defines the device local address of a
register. The data pointed to by this location is read or written using
the Register Data register (PCI config offset 128). When REG_BASE_ADDR has
garbage any read or write of Register Data Register (PCI 128) will cause the
PCI bus to lock up. The TCO watchdog will fire and bring down the system.

Signed-off-by: Nat Gurumoorthy <natg@google.com>
Acked-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-10 22:23:35 -05:00
Nithin Sujir
941c22532f tg3: Update version to 3.135
Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-06 15:10:54 -05:00
Nithin Sujir
94962f7fdd tg3: Expand multicast drop counter miscounting fix to 5762
commit 4d95847381 - "tg3: Workaround
rx_discards stat bug", added a workaround for miscounted statistics for
multicast packets. This fix needs to be applied to the 5762.

Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-06 15:10:53 -05:00
Nithin Sujir
7c786065b1 tg3: Add flag to disable 1G Half Duplex advertisement
Some link partners have issues if the non-standard 1G half duplex is
advertised. This patch adds support for an nvram setting to disable the
advertisement.

Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-06 15:10:53 -05:00
Nithin Sujir
ec99f76d28 tg3: Don't add rxbds_empty to rx_over_errors
rxbds_empty is an informational statistic signifying that a ring full
condition was observed. It does not mean an overflow has occurred.

Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-06 15:10:53 -05:00
David S. Miller
426e1fa31e Merge branch 'siocghwtstamp' of git://git.kernel.org/pub/scm/linux/kernel/git/bwh/sfc-next
Ben Hutchings says:

====================
SIOCGHWTSTAMP ioctl

1. Add the SIOCGHWTSTAMP ioctl and update the timestamping
documentation.
2. Implement SIOCGHWTSTAMP in most drivers that support SIOCSHWTSTAMP.
3. Add a test program to exercise SIOC{G,S}HWTSTAMP.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-05 19:45:14 -05:00
Rafael J. Wysocki
8496e85c20 PCI / tg3: Give up chip reset and carrier loss handling if PCI device is not present
Modify tg3_chip_reset() and tg3_close() to check if the PCI network
adapter device is accessible at all in order to skip poking it or
trying to handle a carrier loss in vain when that's not the case.
Introduce a special PCI helper function pci_device_is_present()
for this purpose.

Of course, this uncovers the lack of the appropriate RTNL locking
in tg3_suspend() and tg3_resume(), so add that locking in there
too.

These changes prevent tg3 from burning a CPU at 100% load level for
solid several seconds after the Thunderbolt link is disconnected from
a Matrox DS1 docking station.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-02 16:01:49 -05:00
Guenter Roeck
a2f4dfba9e tg3: Convert to use hwmon_device_register_with_groups
Use new hwmon API to simplify code, provide missing mandatory 'name'
sysfs attribute, and attach hwmon attributes to hwmon device instead
of pci device.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Nithin Nayak Sujir <nsujir@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-28 18:22:02 -05:00
Ben Hutchings
7260899bde tg3: Implement the SIOCGHWTSTAMP ioctl
While we're doing this, fix the error code for SIOCSHWTSTAMP ioctl on
non-timestamping hardware.

Compile-tested only.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2013-11-21 17:17:36 +00:00
Ben Hutchings
58b187c68d tg3: Validate hwtstamp_config completely before applying it
tg3_hwtstamp_ioctl() should validate all fields of hwtstamp_config
before making any changes.  Currently it sets the TX configuration
before validating the rx_filter field.

Compile-tested only.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Acked-by: Nithin Nayak Sujir <nsujir@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-14 16:22:09 -05:00
Ivan Vecera
85aec73d59 tg3: avoid double-freeing of rx data memory
If build_skb fails the memory associated with the ring buffer is freed but
the ri->data member is not zeroed in this case. This causes a double-free
of this memory in tg3_free_rings->... path. The patch moves this block after
setting ri->data to NULL.
It would be nice to fix this bug also in stable >= v3.4 trees.

Cc: Nithin Nayak Sujir <nsujir@broadcom.com>
Cc: Michael Chan <mchan@broadcom.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Acked-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-07 19:09:44 -05:00
Jingoo Han
4fc76e6f34 net: tg3: remove unnecessary pci_set_drvdata()
The driver core clears the driver data to NULL after device_release
or on probe failure. Thus, it is not needed to manually clear the
device driver data to NULL.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-18 00:03:29 -04:00
Joe Perches
d458cdf712 net:drivers/net: Miscellaneous conversions to ETH_ALEN
Convert the memset/memcpy uses of 6 to ETH_ALEN
where appropriate.

Also convert some struct definitions and u8 array
declarations of [6] to ETH_ALEN.

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-02 17:04:45 -04:00
Hauke Mehrtens
ee002b64ec tg3: use phylib when robo switch is in use
When a switch is connected as a PHY to the MAC driven by tg3, use
phylib and provide the phy address to tg3 from the sprom.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Acked-by: Nithin Nayak Sujir <nsujir@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-02 15:40:57 -04:00
Hauke Mehrtens
ead2402cb4 tg3: add support a phy at an address different than 01
When phylib was in use tg3 only searched at address 01 on the mdio
bus and did not work with any other address. On the BCM4705 SoCs the
switch is connected as a PHY behind the MAC driven by tg3 and it is at
PHY address 30 in most cases. This is a preparation patch to allow
support for such switches.

phy_addr is set to TG3_PHY_MII_ADDR for all devices, which are using
phylib, so this should not change any behavior.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Acked-by: Nithin Nayak Sujir <nsujir@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-02 15:40:57 -04:00
Nithin Sujir
e4cb29fa72 tg3: Update version to 3.134
Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-21 14:04:53 -04:00
Nithin Sujir
cb04be4daa tg3: Remove unnecessary spinlock
The spinlock is not needed after conversion of tg3_flags from array to
set_bit().

Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-21 14:04:52 -04:00
Nithin Sujir
21e315e15d tg3: Appropriately classify interrupts during request_irq
Distinguish between tx, rx and txrx interrupts.

Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-21 14:04:52 -04:00
Nithin Sujir
4bc814ab71 tg3: Remove redundant if check
Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-21 14:04:52 -04:00
Nithin Sujir
db79e1e93e tg3: Remove if 0'd code
Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-21 14:04:52 -04:00
Nithin Sujir
89f67978b5 tg3: LED in shared mode does not blink during traffic
On the 5717, 5719, 5720 and 5762 devices, in shared link/activity mode,
the blink rate must be overridden with all bits set.

Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-21 14:04:52 -04:00
Nithin Sujir
68273712a1 tg3: Add support for new 577xx device ids
This patch adds support for 57764, 57765, 57787, 57782 and 57786
devices.

Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-21 14:04:52 -04:00
Nithin Sujir
3ab7107133 tg3: Add function tg3_phy_shdw_write()
For consistency with other register access functions, add shadow
register access function of the type (register/val).

Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-21 14:04:51 -04:00
Jon Mason
0319f30ee7 tg3: Use pci_dev pm_cap
Use the already existing pm_cap variable in struct pci_dev for
determining the power management offset.  This saves the driver from
having to keep track of an extra variable.

Signed-off-by: Jon Mason <jdmason@kudzu.us>
Cc: Nithin Nayak Sujir <nsujir@broadcom.com>
Cc: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-13 20:13:00 -04:00
Nithin Sujir
300cf9b93f tg3: Expand led off fix to include 5720
Commit 989038e217 ("tg3: Don't turn off
led on 5719 serdes port 0") added code to skip turning led off on port
0 of the 5719 since it powered down other ports. This workaround needs
to be enabled on the 5720 as well.

Cc: stable@vger.kernel.org
Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-12 23:10:33 -04:00
David S. Miller
06c54055be Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflicts:
	drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
	net/bridge/br_multicast.c
	net/ipv6/sit.c

The conflicts were minor:

1) sit.c changes overlap with change to ip_tunnel_xmit() signature.

2) br_multicast.c had an overlap between computing max_delay using
   msecs_to_jiffies and turning MLDV2_MRC() into an inline function
   with a name using lowercase instead of uppercase letters.

3) stmmac had two overlapping changes, one which conditionally allocated
   and hooked up a dma_cfg based upon the presence of the pbl OF property,
   and another one handling store-and-forward DMA made.  The latter of
   which should not go into the new of_find_property() basic block.

Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-05 14:58:52 -04:00
Nithin Sujir
989038e217 tg3: Don't turn off led on 5719 serdes port 0
Turning off led on port 0 of the 5719 serdes causes all other ports to
lose power and stop functioning. Add tg3_phy_led_bug() function to check
for this condition. We use a switch() in tg3_phy_led_bug() for
consistency with the tg3_phy_power_bug() function.

Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-03 22:23:40 -04:00
Joe Perches
ede23fa816 drivers:net: Convert dma_alloc_coherent(...__GFP_ZERO) to dma_zalloc_coherent
__GFP_ZERO is an uncommon flag and perhaps is better
not used.  static inline dma_zalloc_coherent exists
so convert the uses of dma_alloc_coherent with __GFP_ZERO
to the more common kernel style with zalloc.

Remove memset from the static inline dma_zalloc_coherent
and add just one use of __GFP_ZERO instead.

Trivially reduces the size of the existing uses of
dma_zalloc_coherent.

Realign arguments as appropriate.

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-29 21:55:23 -04:00
David S. Miller
2ff1cf12c9 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net 2013-08-16 15:37:26 -07:00
Daniel Borkmann
6829309926 net: tg3: fix NULL pointer dereference in tg3_io_error_detected and tg3_io_slot_reset
Commit d8af4dfd8 ("net/tg3: Fix kernel crash") introduced a possible
NULL pointer dereference in tg3 driver when !netdev || !netif_running(netdev)
condition is met and netdev is NULL. Then, the jump to the 'done' label
calls dev_close() with a netdevice that is NULL. Therefore, only call
dev_close() when we have a netdevice, but one that is not running.

[ Add the same checks in tg3_io_slot_reset() per Gavin Shan - by Nithin
Nayak Sujir ]

Reported-by: Dave Jones <davej@redhat.com>
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Cc: Gavin Shan <shangw@linux.vnet.ibm.com>
Cc: Michael Chan <mchan@broadcom.com>
Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com>
Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-15 13:41:20 -07:00
Yijing Wang
0f847584a8 tg3: clean up unnecessary MSI/MSI-X capability find
PCI core will initialize device MSI/MSI-X capability in
pci_msi_init_pci_dev(). So device driver should use
pci_dev->msi_cap/msix_cap to determine whether the device
support MSI/MSI-X instead of using
pci_find_capability(pci_dev, PCI_CAP_ID_MSI/MSIX).
Access to PCIe device config space again will consume more time.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Cc: Nithin Nayak Sujir <nsujir@broadcom.com>
Cc: Michael Chan <mchan@broadcom.com>
Cc: netdev@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-09 13:49:51 -07:00
David S. Miller
0e76a3a587 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Merge net into net-next to setup some infrastructure Eric
Dumazet needs for usbnet changes.

Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-03 21:36:46 -07:00
Nithin Sujir
cd77b2ebf9 tg3: Update version to 3.133
Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-29 23:38:52 -07:00
Nithin Sujir
378b72c873 tg3: Fix UDP fragments treated as RMCP
The 5762 devices sometimes incorrectly treat udp fragments as RMCP
packets and route to the APE. This patch sets the RX_MODE_IPV4_FRAG_FIX
bit for these devices which enables the proper behaviour.

Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-29 23:38:52 -07:00
Nithin Sujir
92e6457d4c tg3: Enable support for timesync gpio output
The PTP_CAPABLE tg3 devices have a gpio output that is toggled when the
free running counter matches a watchdog value. This patch adds support
to set the watchdog and enable this feature.

Since the output is controlled via bits in the EAV_REF_CLCK_CTL
register, we have to read-modify-write it when we stop/resume.

Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-29 23:38:52 -07:00
Nithin Sujir
4c305fa2cb tg3: Implement the shutdown handler
Also remove the call to tg3_power_down_prepare() in tg3_power_down()
since tg3_close() calls it.

Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-29 23:38:52 -07:00
Nithin Sujir
5137a2ee20 tg3: Allow NVRAM programming when interface is down
Previously, when the interface was brought down, the driver would set
the power state to D3hot. In D3hot, we don't have access to the NVRAM.
This patch removes the call to set the power state to PCI_D3hot in
close. A following patch will implement the shutdown handler to properly
set the D3hot state when the system is going down.

Doing the above means that the TG3_PHYFLG_IS_LOW_POWER should not be
checked to validate access to the NVRAM.

Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-29 23:38:52 -07:00
Nithin Sujir
c1459356d9 tg3: Remove incorrect switch to aux power
During probe, the driver is incorrectly switching the power to Vaux on
the 5717 and later devices. At this point, we are in D0 state and
drawing maximum power. We also definitely have Vmain available. It
doesn't make sense to switch to Vaux since it has a lesser maximum power
draw and we might go over the limit. On a new system, we observe that
not all ports are recognized in some of the slots with this call in
place.

Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-29 23:38:52 -07:00