This series consists of the usual driver updates (ufs, qla2xxx,
smartpqi, target, zfcp, fnic, mpt3sas, ibmvfc) plus a load of
cleanups, a major power management rework and a load of assorted minor
updates. There are a few core updates (formatting fixes being the big
one) but nothing major this cycle.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCX9o0KSYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishbOZAP9D5NTN
J7dJUo2MIMy84YBu+d9ag7yLlNiRWVY2yw5vHwD/Z7JjAVLwz/tzmyjU9//o2J6w
hwhOv6Uto89gLCWSEz8=
=KUPT
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"This consists of the usual driver updates (ufs, qla2xxx, smartpqi,
target, zfcp, fnic, mpt3sas, ibmvfc) plus a load of cleanups, a major
power management rework and a load of assorted minor updates.
There are a few core updates (formatting fixes being the big one) but
nothing major this cycle"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (279 commits)
scsi: mpt3sas: Update driver version to 36.100.00.00
scsi: mpt3sas: Handle trigger page after firmware update
scsi: mpt3sas: Add persistent MPI trigger page
scsi: mpt3sas: Add persistent SCSI sense trigger page
scsi: mpt3sas: Add persistent Event trigger page
scsi: mpt3sas: Add persistent Master trigger page
scsi: mpt3sas: Add persistent trigger pages support
scsi: mpt3sas: Sync time periodically between driver and firmware
scsi: qla2xxx: Update version to 10.02.00.104-k
scsi: qla2xxx: Fix device loss on 4G and older HBAs
scsi: qla2xxx: If fcport is undergoing deletion complete I/O with retry
scsi: qla2xxx: Fix the call trace for flush workqueue
scsi: qla2xxx: Fix flash update in 28XX adapters on big endian machines
scsi: qla2xxx: Handle aborts correctly for port undergoing deletion
scsi: qla2xxx: Fix N2N and NVMe connect retry failure
scsi: qla2xxx: Fix FW initialization error on big endian machines
scsi: qla2xxx: Fix crash during driver load on big endian machines
scsi: qla2xxx: Fix compilation issue in PPC systems
scsi: qla2xxx: Don't check for fw_started while posting NVMe command
scsi: qla2xxx: Tear down session if FW say it is down
...
clang complains about a possible code path in which a variable is used
without an initialization:
drivers/scsi/ufs/ufshcd.c:7690:3: error: variable 'sdp' is used uninitialized whenever 'if' condition is false [-Werror,-Wsometimes-uninitialized]
BUG_ON(1);
^~~~~~~~~
include/asm-generic/bug.h:63:36: note: expanded from macro 'BUG_ON'
#define BUG_ON(condition) do { if (unlikely(condition)) BUG(); } while (0)
^~~~~~~~~~~~~~~~~~~
Turn the BUG_ON(1) into an unconditional BUG() that makes it clear to clang
that this code path is never hit.
Link: https://lore.kernel.org/r/20201203223137.1205933-1-arnd@kernel.org
Fixes: 4f3e900b62 ("scsi: ufs: Clear UAC for FFU and RPMB LUNs")
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Invalidation check of arguments should have been checked before
ufshcd_hold(). This can help to prevent ufshcd_hold()/ ufshcd_release()
from being invoked unnecessarily.
[mkp: removed unused out: labels]
Link: https://lore.kernel.org/r/1606973132-5937-1-git-send-email-user@jang-Samsung-DeskTop-System
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: jintae jang <jt77.jang@samsung.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Dump registers and states prior to leaving IRQ handler when an AH8 error
occurs.
Link: https://lore.kernel.org/r/1606910644-21185-4-git-send-email-cang@codeaurora.org
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Reviewed-by: Bao D. Nguyen <nguyenb@codeaurora.org>
Reviewed-by: Asutosh Das <asutoshd@codeaurora.org>
Reviewed-by: Hongwu Su <hongwus@codeaurora.org>
Signed-off-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In current task abort routine, if task abort happens to the device W-LUN,
the code directly jumps to ufshcd_eh_host_reset_handler() to perform a full
reset and restore then returns FAIL or SUCCESS. Commands sent to the device
W-LUN are most likely the SSU cmds sent during UFS PM operations. If such
SSU cmd enters task abort routine when ufshcd_eh_host_reset_handler()
flushes eh_work, it will get stuck there since err_handler is serialized
with PM operations.
In order to unblock above call path, we merely clean up the lrb taken by
this cmd, queue the eh_work and return SUCCESS. Once the cmd is aborted,
the PM operation which sends out the cmd just errors out, then err_handler
shall be able to proceed with the full reset and restore.
In this scenario, the cmd is aborted even before it is actually cleared by
HW, set the lrb->in_use flag to prevent subsequent cmds, including SCSI
cmds and dev cmds, from taking the lrb released from abort. The flag shall
evetually be cleared in __ufshcd_transfer_req_compl() invoked by the full
reset and restore from err_handler.
[mkp: conflict with event logging series]
Link: https://lore.kernel.org/r/1606910644-21185-3-git-send-email-cang@codeaurora.org
Reviewed-by: Asutosh Das <asutoshd@codeaurora.org>
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Serialize eh_work with system PM events and async scan to make sure eh_work
does not run in parallel with them.
Link: https://lore.kernel.org/r/1606910644-21185-2-git-send-email-cang@codeaurora.org
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Reviewed-by: Asutosh Das <asutoshd@codeaurora.org>
Reviewed-by: Hongwu Su <hongwus@codeaurora.org>
Signed-off-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
UFS specficication allows different VCC configurations for UFS devices,
for example:
(1). 2.70V - 3.60V (Activated by default in UFS core driver)
(2). 1.70V - 1.95V (Activated if "vcc-supply-1p8" is declared in
device tree)
(3). 2.40V - 2.70V (Supported since UFS 3.x)
With the introduction of UFS 3.x products, an issue is happening that UFS
driver will use wrong "min_uV-max_uV" values to configure the voltage of
VCC regulator on UFU 3.x products with the configuration (3) used.
To solve this issue, we simply remove pre-defined initial VCC voltage
values in UFS core driver with below reasons,
1. UFS specifications do not define how to detect the VCC configuration
supported by attached device.
2. Device tree already supports standard regulator properties.
Therefore VCC voltage shall be defined correctly in device tree, and shall
not changed by UFS driver. What UFS driver needs to do is simply enable or
disable the VCC regulator only.
Similar change is applied to VCCQ and VCCQ2 as well.
Note that we keep struct ufs_vreg unchanged. This allows vendors to
configure proper min_uV and max_uV of any regulators to make
regulator_set_voltage() works during regulator toggling flow in the
future. Without specific vendor configurations, min_uV and max_uV will be
NULL by default and UFS core driver will enable or disable the regulator
only without adjusting its voltage.
Link: https://lore.kernel.org/r/20201202091819.22363-1-stanley.chu@mediatek.com
Reviewed-by: Asutosh Das <asutoshd@codeaurora.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Can Guo <cang@codeaurora.org>
Acked-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Use phy_initialization helper instead of direct invocation.
Link: https://lore.kernel.org/r/20201205120041.26869-5-stanley.chu@mediatek.com
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Use phy_initialization helper instead of direct function invocation.
Link: https://lore.kernel.org/r/20201205120041.26869-4-stanley.chu@mediatek.com
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Introduce phy_initialization helper since this is the only one variant
function without helper.
Link: https://lore.kernel.org/r/20201205120041.26869-3-stanley.chu@mediatek.com
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Since setup_regulators variant function is not used by any vendors, simply
remove it.
Link: https://lore.kernel.org/r/20201205120041.26869-2-stanley.chu@mediatek.com
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Introduce event_notify implementation on MediaTek UFS platform. A
vendor-specific tracepoint is added that can be used for debugging
purposes.
Link: https://lore.kernel.org/r/20201205115901.26815-5-stanley.chu@mediatek.com
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Introduce event_notify variant function to allow vendor to get notification
of important events and connect to any proprietary debugging facilities.
Link: https://lore.kernel.org/r/20201205115901.26815-4-stanley.chu@mediatek.com
Reviewed-by: Asutosh Das <asutoshd@codeaurora.org>
Reviewed-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The UFS error history does not only have "history of errors" but also a
log of some other events which are not defined as errors.
This patch fixes the confused naming of related functions and changes the
approach for updating and printing history in preparation of next patch.
This patch does not change any functionality.
Link: https://lore.kernel.org/r/20201205115901.26815-3-stanley.chu@mediatek.com
Reviewed-by: Asutosh Das <asutoshd@codeaurora.org>
Reviewed-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add error history for abort event in UFS Device W-LUN.
Use specified value as parameter of ufshcd_update_reg_hist() to identify
the aborted tag or LUNs.
Link: https://lore.kernel.org/r/20201205115901.26815-2-stanley.chu@mediatek.com
Reviewed-by: Asutosh Das <asutoshd@codeaurora.org>
Reviewed-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Instead of hardcoding the scale down gear, make it a member of
the ufs_clk_scaling struct.
Link: https://lore.kernel.org/r/1606442334-22641-1-git-send-email-cang@codeaurora.org
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Asutosh Das <asutoshd@codeaurora.org>
Signed-off-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
If we want to disable clocks to save power but still keep the link active,
core_clk_unipro, like ref_clk, should not be the one being disabled.
Link: https://lore.kernel.org/r/1606356063-38380-3-git-send-email-cang@codeaurora.org
Reviewed-by: Hongwu Su <hongwus@codeaurora.org>
Reviewed-by: Asutosh Das <asutoshd@codeaurora.org>
Signed-off-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Remove the param skip_ref_clk from __ufshcd_setup_clocks(), but keep a flag
in struct ufs_clk_info to tell whether a clock can be disabled or not while
the link is active.
Link: https://lore.kernel.org/r/1606356063-38380-2-git-send-email-cang@codeaurora.org
Reviewed-by: Hongwu Su <hongwus@codeaurora.org>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In the case that auto_bkops_enable is false, which means auto bkops has
been disabled, there is no need to call ufshcd_disable_auto_bkops().
Link: https://lore.kernel.org/r/20201125185300.3394-1-huobean@gmail.com
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Reviewed-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The introduction of ufshcd_dme_configure_adapt() refactored out duplication
from the Mediatek and Qualcomm drivers.
Both these implementations had the logic of:
gear_tx == UFS_HS_G4 => PA_INITIAL_ADAPT
gear_tx != UFS_HS_G4 => PA_NO_ADAPT
but now both implementations pass PA_INITIAL_ADAPT as "adapt_val" and if
gear_tx is not UFS_HS_G4 that is replaced with PA_INITIAL_ADAPT. In other
words, it's PA_INITIAL_ADAPT in both above cases.
The result is that e.g. Qualcomm SM8150 has no longer functional UFS, so
adjust the logic to match the previous implementation.
Link: https://lore.kernel.org/r/20201121044810.507288-1-bjorn.andersson@linaro.org
Fixes: fc85a74e28 ("scsi: ufs: Refactor ADAPT configuration function")
Reviewed-by: Can Guo <cang@codeaurora.org>
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
If UFS host device is in runtime-suspended state while UFS shutdown
callback is invoked, UFS device shall be resumed for register
accesses. Currently only UFS local runtime resume function will be invoked
to wake up the host. This is not enough because if someone triggers
runtime resume from block layer, then race may happen between shutdown and
runtime resume flow, and finally lead to unlocked register access.
To fix this, in ufshcd_shutdown(), use pm_runtime_get_sync() instead of
resuming UFS device by ufshcd_runtime_resume() "internally" to let runtime
PM framework manage the whole resume flow.
Link: https://lore.kernel.org/r/20201119062916.12931-1-stanley.chu@mediatek.com
Fixes: 57d104c153 ("ufs: add UFS power management support")
Reviewed-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
We have LBA and length for unmap commands.
Link: https://lore.kernel.org/r/20201117165839.1643377-8-jaegeuk@kernel.org
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Reviewed-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Leo Liou <leoliou@google.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The following call stack prevents clk_gating at every I/O completion. We
can remove the condition, ufshcd_any_tag_in_use(), since clkgating_work
will check it again.
ufshcd_complete_requests(struct ufs_hba *hba)
ufshcd_transfer_req_compl()
__ufshcd_transfer_req_compl()
__ufshcd_release(hba)
if (ufshcd_any_tag_in_use() == 1)
return;
ufshcd_tmc_handler(hba);
blk_mq_tagset_busy_iter();
Note that this still requires work to deal with a potential race condition
when user sets clkgating.delay_ms to very small value. That can cause
preventing clkgating by the check of ufshcd_any_tag_in_use() in gate_work.
Link: https://lore.kernel.org/r/20201117165839.1643377-7-jaegeuk@kernel.org
Fixes: 7252a36030 ("scsi: ufs: Avoid busy-waiting by eliminating tag conflicts")
Reviewed-by: Asutosh Das <asutoshd@codeaurora.org>
Reviewed-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This adds user-friendly tracepoints with group id.
Link: https://lore.kernel.org/r/20201117165839.1643377-6-jaegeuk@kernel.org
Reviewed-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@google.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Must have WQ_MEM_RECLAIM
``WQ_MEM_RECLAIM``
All workqueues which might be used in the memory reclaim paths **MUST**
have this flag set. The wq is guaranteed to have at least one execution
context regardless of memory pressure.
Link: https://lore.kernel.org/r/20201117165839.1643377-5-jaegeuk@kernel.org
Reviewed-by: Asutosh Das <asutoshd@codeaurora.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@google.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In order to conduct FFU or RPMB operations, UFS needs to clear UNIT
ATTENTION condition. Clear it explicitly so that we get no failures during
initialization.
Link: https://lore.kernel.org/r/20201117165839.1643377-4-jaegeuk@kernel.org
Signed-off-by: Jaegeuk Kim <jaegeuk@google.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
While running a stress test which enables/disables clkgating, we
occasionally hit device timeout. This patch avoids a subtle race condition
to address it.
Link: https://lore.kernel.org/r/20201117165839.1643377-3-jaegeuk@kernel.org
Reviewed-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@google.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Once UFS is gated with CLKS_OFF, it should not call REQ_CLKS_OFF
again. This can lead to hibern8_enter failure.
Link: https://lore.kernel.org/r/20201117165839.1643377-2-jaegeuk@kernel.org
Reviewed-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
If someone plays with the UFS clk scaling devfreq governor through sysfs,
ufshcd_devfreq_scale may be called even when HBA is not runtime ACTIVE.
This can lead to unexpected error. We cannot just protect it by calling
pm_runtime_get_sync() because that may cause a race condition since HBA
runtime suspend ops need to suspend clk scaling. To fix this call
pm_runtime_get_noresume() and check HBA's runtime status. Only proceed if
HBA is runtime ACTIVE, otherwise just bail.
governor_store
devfreq_performance_handler
update_devfreq
devfreq_set_target
ufshcd_devfreq_target
ufshcd_devfreq_scale
Link: https://lore.kernel.org/r/1600758548-28576-1-git-send-email-cang@codeaurora.org
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
WB-related sysfs entries can be accessed even when an UFS device does not
support the feature. The descriptors which are not supported by the UFS
device may be wrongly reported when they are accessed from their
corrsponding sysfs entries. Fix it by adding a sanity check of parameter
offset against the actual decriptor length.
Link: https://lore.kernel.org/r/1603346348-14149-1-git-send-email-cang@codeaurora.org
Reviewed-by: Asutosh Das <asutoshd@codeaurora.org>
Acked-by: Daejun Park <daejun7.park@samsung.com>
Signed-off-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Use common ADAPT configuration function to reduce duplicated code in UFS
drivers.
Link: https://lore.kernel.org/r/20201116065054.7658-10-stanley.chu@mediatek.com
Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Use common ADAPT configuration function to reduce duplicated code in UFS
drivers.
Link: https://lore.kernel.org/r/20201116065054.7658-9-stanley.chu@mediatek.com
Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Several vendors are using same code to configure ADAPT settings for
HS-G4. Simply refactor it as common function.
Link: https://lore.kernel.org/r/20201116065054.7658-8-stanley.chu@mediatek.com
Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Use common device parameter initialization function instead of initializing
those parameters by vendor driver itself.
Link: https://lore.kernel.org/r/20201116065054.7658-7-stanley.chu@mediatek.com
Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Use common device parameter initialization function instead of initializing
those parameters by vendor driver itself.
Link: https://lore.kernel.org/r/20201116065054.7658-6-stanley.chu@mediatek.com
Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Use common device parameter initialization function instead of initializing
those parameters by vendor driver itself.
Link: https://lore.kernel.org/r/20201116065054.7658-5-stanley.chu@mediatek.com
Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Use common device parameter initialization function instead of initializing
those parameters by vendor driver itself.
Link: https://lore.kernel.org/r/20201116065054.7658-4-stanley.chu@mediatek.com
Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Nowadays many vendors initialize their device parameters in their own
vendor drivers. The initialization code is almost the same as well as the
pre-defined definitions. Introduce a common device parameter initialization
function which assign the most common initial values. With this function,
we could remove those duplicated codes in vendor drivers.
Link: https://lore.kernel.org/r/20201116065054.7658-3-stanley.chu@mediatek.com
Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Refactor performance scaling related functions in MediaTek UFS driver.
Link: https://lore.kernel.org/r/20201116065054.7658-2-stanley.chu@mediatek.com
Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
QCOM_SCM is only needed to make the qcom_scm_*() calls in ufs-qcom-ice.c,
which is only compiled when SCSI_UFS_CRYPTO=y. So don't unnecessarily
enable QCOM_SCM when SCSI_UFS_CRYPTO=n.
Link: https://lore.kernel.org/r/20201114004754.235378-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Once HBA enabling has failed, add retry mechanism and allow vendors to
apply specific tweaks before the next retry. For example, vendors can do
vendor-specific host reset flow in variant function
"ufshcd_vops_hce_enable_notify()".
Link: https://lore.kernel.org/r/20201112054537.22494-1-stanley.chu@mediatek.com
Reviewed-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add the missing destroy_workqueue() before return from ufshcd_init in the
error handling case as well as in ufshcd_remove.
Link: https://lore.kernel.org/r/20201110074223.41280-1-miaoqinglang@huawei.com
Fixes: 4db7a23605 ("scsi: ufs: Fix concurrency of error handler and other error recovery paths")
Suggested-by: Avri Altman <Avri.Altman@wdc.com>
Reviewed-by: Asutosh Das <asutoshd@codeaurora.org>
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Provide HS-G4 support in MediaTek UFS platforms.
To support HS-G4, introduce mechanism to get the MediaTek UFS controller
version. With such information, driver can make right decision to apply
different configurations in different controllers.
Link: https://lore.kernel.org/r/20201029115750.24391-7-stanley.chu@mediatek.com
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Some vendors need newer UniPro version to decide if some features can be
enabled or not.
Simply add missing enums for the latest UniPro versions.
Link: https://lore.kernel.org/r/20201029115750.24391-6-stanley.chu@mediatek.com
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Support an option to allow users to disable auto-hibern8 feature.
Instead, enable hibern8-during-clk-gating feature to keep similar power
consumption.
Link: https://lore.kernel.org/r/20201029115750.24391-5-stanley.chu@mediatek.com
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
UFS proprietary features (including features introduced later) in MediaTek
UFS platforms have complicated combinations among different platforms.
To ease code readability and maintenance, decouple all proprietary features
from platform bindings. Each feature would be enabled only if specific
property string is defined in device tree node.
Link: https://lore.kernel.org/r/20201029115750.24391-4-stanley.chu@mediatek.com
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Some MediaTek UFS platforms need to control VA09 power
specifically. Provide such control according to the device tree binding.
Link: https://lore.kernel.org/r/20201029115750.24391-3-stanley.chu@mediatek.com
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In ufs_mtk_unipro_set_lpm(), use specific unsigned values as the argument
to invoke ufshcd_dme_set().
At the same time, change the name of ufs_mtk_unipro_set_pm() to
ufs_mtk_unipro_set_lpm() to align the naming convention in MediaTek UFS
driver.
Link: https://lore.kernel.org/r/20201029115750.24391-2-stanley.chu@mediatek.com
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fixes the following W=1 kernel build warning(s):
drivers/scsi/ufs/ufshcd.c:6603: warning: Function parameter or member 'hba' not described in 'ufshcd_try_to_abort_task'
drivers/scsi/ufs/ufshcd.c:6603: warning: Function parameter or member 'tag' not described in 'ufshcd_try_to_abort_task'
drivers/scsi/ufs/ufshcd.c:6603: warning: Excess function parameter 'cmd' description in 'ufshcd_try_to_abort_task'
Link: https://lore.kernel.org/r/20201102142359.561122-12-lee.jones@linaro.org
Cc: Alim Akhtar <alim.akhtar@samsung.com>
Cc: Avri Altman <avri.altman@wdc.com>
Cc: Santosh Yaraganavi <santosh.sy@samsung.com>
Cc: Vinayak Holikatti <h.vinayak@samsung.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Use the uic_cmd->cmd_active as a flag to track the lifecycle of an UIC cmd.
The flag is set before sending the UIC cmd and cleared in IRQ handler. When
a PMC or UIC cmd completion timeout happens, if the flag is not set,
instead of returning timeout error, we still treat it as a successful
operation. This is to deal with the scenario in which completion has been
raised but the one waiting for the completion cannot be awaken in time due
to kernel scheduling problem.
Link: https://lore.kernel.org/r/1604384682-15837-3-git-send-email-cang@codeaurora.org
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
