Revert commit d0e936adbd ("cpufreq: intel_pstate: Process HWP
Guaranteed change notification"), because it causes a NULL pointer
dereference to occur on Lenovo X1 gen9 laptops due to an HWP
guaranteed performance change interrupt arriving prematurely.
This feature will be revisited in the next cycle.
Reported-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The variable ret is being initialized with a value that is never read, it
is being updated later on. The assignment is redundant and can be removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Joakim Zhang says:
====================
net: stmmac: fix WoL issue
This patch set fixes stmmac not working after system resume back with WoL
active. Thanks a lot for Russell King keeps looking into this issue.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
We can reproduce this issue with below steps:
1) enable WoL on the host
2) host system suspended
3) remote client send out wakeup packets
We can see that host system resume back, but can't work, such as ping failed.
After a bit digging, this issue is introduced by the commit 46f69ded98
("net: stmmac: Use resolved link config in mac_link_up()"), which use
the finalised link parameters in mac_link_up() rather than the
parameters in mac_config().
There are two scenarios for MAC suspend/resume in STMMAC driver:
1) MAC suspend with WoL inactive, stmmac_suspend() call
phylink_mac_change() to notify phylink machine that a change in MAC
state, then .mac_link_down callback would be invoked. Further, it will
call phylink_stop() to stop the phylink instance. When MAC resume back,
firstly phylink_start() is called to start the phylink instance, then
call phylink_mac_change() which will finally trigger phylink machine to
invoke .mac_config and .mac_link_up callback. All is fine since
configuration in these two callbacks will be initialized, that means MAC
can restore the state.
2) MAC suspend with WoL active, phylink_mac_change() will put link
down, but there is no phylink_stop() to stop the phylink instance, so it
will link up again, that means .mac_config and .mac_link_up would be
invoked before system suspended. After system resume back, it will do
DMA initialization and SW reset which let MAC lost the hardware setting
(i.e MAC_Configuration register(offset 0x0) is reset). Since link is up
before system suspended, so .mac_link_up would not be invoked after
system resume back, lead to there is no chance to initialize the
configuration in .mac_link_up callback, as a result, MAC can't work any
longer.
After discussed with Russell King [1], we confirm that phylink framework
have not take WoL into consideration yet. This patch calls
phylink_suspend()/phylink_resume() functions which is newly introduced
by Russell King to fix this issue.
[1] https://lore.kernel.org/netdev/20210901090228.11308-1-qiangqing.zhang@nxp.com/
Fixes: 46f69ded98 ("net: stmmac: Use resolved link config in mac_link_up()")
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Joakim Zhang reports that Wake-on-Lan with the stmmac ethernet driver broke
when moving the incorrect handling of mac link state out of mac_config().
This reason this breaks is because the stmmac's WoL is handled by the MAC
rather than the PHY, and phylink doesn't cater for that scenario.
This patch adds the necessary phylink code to handle suspend/resume events
according to whether the MAC still needs a valid link or not. This is the
barest minimum for this support.
Reported-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Tested-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The cur_tx counter must be incremented after TACT bit of
txdesc->status was set. However, a CPU is possible to reorder
instructions and/or memory accesses between cur_tx and
txdesc->status. And then, if TX interrupt happened at such a
timing, the sh_eth_tx_free() may free the descriptor wrongly.
So, add wmb() before cur_tx++.
Otherwise NETDEV WATCHDOG timeout is possible to happen.
Fixes: 86a74ff21a ("net: sh_eth: add support for Renesas SuperH Ethernet")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
btrfs_add_ordered_extent_*() add num_bytes to fs_info->ordered_bytes.
Then, splitting an ordered extent will call btrfs_add_ordered_extent_*()
again for split extents, leading to double counting of the region of
a split extent. These leaked bytes are finally reported at unmount time
as follow:
BTRFS info (device dm-1): at unmount dio bytes count 364544
Fix the double counting by subtracting split extent's size from
fs_info->ordered_bytes.
Fixes: d22002fd37 ("btrfs: zoned: split ordered extent when bio is sent")
CC: stable@vger.kernel.org # 5.12+
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When removing the device we call blkdev_put() on the device once we've
removed it, and because we have an EXCL open we need to take the
->open_mutex on the block device to clean it up. Unfortunately during
device remove we are holding the sb writers lock, which results in the
following lockdep splat:
======================================================
WARNING: possible circular locking dependency detected
5.14.0-rc2+ #407 Not tainted
------------------------------------------------------
losetup/11595 is trying to acquire lock:
ffff973ac35dd138 ((wq_completion)loop0){+.+.}-{0:0}, at: flush_workqueue+0x67/0x5e0
but task is already holding lock:
ffff973ac9812c68 (&lo->lo_mutex){+.+.}-{3:3}, at: __loop_clr_fd+0x41/0x660 [loop]
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #4 (&lo->lo_mutex){+.+.}-{3:3}:
__mutex_lock+0x7d/0x750
lo_open+0x28/0x60 [loop]
blkdev_get_whole+0x25/0xf0
blkdev_get_by_dev.part.0+0x168/0x3c0
blkdev_open+0xd2/0xe0
do_dentry_open+0x161/0x390
path_openat+0x3cc/0xa20
do_filp_open+0x96/0x120
do_sys_openat2+0x7b/0x130
__x64_sys_openat+0x46/0x70
do_syscall_64+0x38/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
-> #3 (&disk->open_mutex){+.+.}-{3:3}:
__mutex_lock+0x7d/0x750
blkdev_put+0x3a/0x220
btrfs_rm_device.cold+0x62/0xe5
btrfs_ioctl+0x2a31/0x2e70
__x64_sys_ioctl+0x80/0xb0
do_syscall_64+0x38/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
-> #2 (sb_writers#12){.+.+}-{0:0}:
lo_write_bvec+0xc2/0x240 [loop]
loop_process_work+0x238/0xd00 [loop]
process_one_work+0x26b/0x560
worker_thread+0x55/0x3c0
kthread+0x140/0x160
ret_from_fork+0x1f/0x30
-> #1 ((work_completion)(&lo->rootcg_work)){+.+.}-{0:0}:
process_one_work+0x245/0x560
worker_thread+0x55/0x3c0
kthread+0x140/0x160
ret_from_fork+0x1f/0x30
-> #0 ((wq_completion)loop0){+.+.}-{0:0}:
__lock_acquire+0x10ea/0x1d90
lock_acquire+0xb5/0x2b0
flush_workqueue+0x91/0x5e0
drain_workqueue+0xa0/0x110
destroy_workqueue+0x36/0x250
__loop_clr_fd+0x9a/0x660 [loop]
block_ioctl+0x3f/0x50
__x64_sys_ioctl+0x80/0xb0
do_syscall_64+0x38/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
other info that might help us debug this:
Chain exists of:
(wq_completion)loop0 --> &disk->open_mutex --> &lo->lo_mutex
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&lo->lo_mutex);
lock(&disk->open_mutex);
lock(&lo->lo_mutex);
lock((wq_completion)loop0);
*** DEADLOCK ***
1 lock held by losetup/11595:
#0: ffff973ac9812c68 (&lo->lo_mutex){+.+.}-{3:3}, at: __loop_clr_fd+0x41/0x660 [loop]
stack backtrace:
CPU: 0 PID: 11595 Comm: losetup Not tainted 5.14.0-rc2+ #407
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-2.fc32 04/01/2014
Call Trace:
dump_stack_lvl+0x57/0x72
check_noncircular+0xcf/0xf0
? stack_trace_save+0x3b/0x50
__lock_acquire+0x10ea/0x1d90
lock_acquire+0xb5/0x2b0
? flush_workqueue+0x67/0x5e0
? lockdep_init_map_type+0x47/0x220
flush_workqueue+0x91/0x5e0
? flush_workqueue+0x67/0x5e0
? verify_cpu+0xf0/0x100
drain_workqueue+0xa0/0x110
destroy_workqueue+0x36/0x250
__loop_clr_fd+0x9a/0x660 [loop]
? blkdev_ioctl+0x8d/0x2a0
block_ioctl+0x3f/0x50
__x64_sys_ioctl+0x80/0xb0
do_syscall_64+0x38/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7fc21255d4cb
So instead save the bdev and do the put once we've dropped the sb
writers lock in order to avoid the lockdep recursion.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We update the ctime/mtime of a block device when we remove it so that
blkid knows the device changed. However we do this by re-opening the
block device and calling filp_update_time. This is more correct because
it'll call the inode->i_op->update_time if it exists, but the block dev
inodes do not do this. Instead call generic_update_time() on the
bd_inode in order to avoid the blkdev_open path and get rid of the
following lockdep splat:
======================================================
WARNING: possible circular locking dependency detected
5.14.0-rc2+ #406 Not tainted
------------------------------------------------------
losetup/11596 is trying to acquire lock:
ffff939640d2f538 ((wq_completion)loop0){+.+.}-{0:0}, at: flush_workqueue+0x67/0x5e0
but task is already holding lock:
ffff939655510c68 (&lo->lo_mutex){+.+.}-{3:3}, at: __loop_clr_fd+0x41/0x660 [loop]
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #4 (&lo->lo_mutex){+.+.}-{3:3}:
__mutex_lock+0x7d/0x750
lo_open+0x28/0x60 [loop]
blkdev_get_whole+0x25/0xf0
blkdev_get_by_dev.part.0+0x168/0x3c0
blkdev_open+0xd2/0xe0
do_dentry_open+0x161/0x390
path_openat+0x3cc/0xa20
do_filp_open+0x96/0x120
do_sys_openat2+0x7b/0x130
__x64_sys_openat+0x46/0x70
do_syscall_64+0x38/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
-> #3 (&disk->open_mutex){+.+.}-{3:3}:
__mutex_lock+0x7d/0x750
blkdev_get_by_dev.part.0+0x56/0x3c0
blkdev_open+0xd2/0xe0
do_dentry_open+0x161/0x390
path_openat+0x3cc/0xa20
do_filp_open+0x96/0x120
file_open_name+0xc7/0x170
filp_open+0x2c/0x50
btrfs_scratch_superblocks.part.0+0x10f/0x170
btrfs_rm_device.cold+0xe8/0xed
btrfs_ioctl+0x2a31/0x2e70
__x64_sys_ioctl+0x80/0xb0
do_syscall_64+0x38/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
-> #2 (sb_writers#12){.+.+}-{0:0}:
lo_write_bvec+0xc2/0x240 [loop]
loop_process_work+0x238/0xd00 [loop]
process_one_work+0x26b/0x560
worker_thread+0x55/0x3c0
kthread+0x140/0x160
ret_from_fork+0x1f/0x30
-> #1 ((work_completion)(&lo->rootcg_work)){+.+.}-{0:0}:
process_one_work+0x245/0x560
worker_thread+0x55/0x3c0
kthread+0x140/0x160
ret_from_fork+0x1f/0x30
-> #0 ((wq_completion)loop0){+.+.}-{0:0}:
__lock_acquire+0x10ea/0x1d90
lock_acquire+0xb5/0x2b0
flush_workqueue+0x91/0x5e0
drain_workqueue+0xa0/0x110
destroy_workqueue+0x36/0x250
__loop_clr_fd+0x9a/0x660 [loop]
block_ioctl+0x3f/0x50
__x64_sys_ioctl+0x80/0xb0
do_syscall_64+0x38/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
other info that might help us debug this:
Chain exists of:
(wq_completion)loop0 --> &disk->open_mutex --> &lo->lo_mutex
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&lo->lo_mutex);
lock(&disk->open_mutex);
lock(&lo->lo_mutex);
lock((wq_completion)loop0);
*** DEADLOCK ***
1 lock held by losetup/11596:
#0: ffff939655510c68 (&lo->lo_mutex){+.+.}-{3:3}, at: __loop_clr_fd+0x41/0x660 [loop]
stack backtrace:
CPU: 1 PID: 11596 Comm: losetup Not tainted 5.14.0-rc2+ #406
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-2.fc32 04/01/2014
Call Trace:
dump_stack_lvl+0x57/0x72
check_noncircular+0xcf/0xf0
? stack_trace_save+0x3b/0x50
__lock_acquire+0x10ea/0x1d90
lock_acquire+0xb5/0x2b0
? flush_workqueue+0x67/0x5e0
? lockdep_init_map_type+0x47/0x220
flush_workqueue+0x91/0x5e0
? flush_workqueue+0x67/0x5e0
? verify_cpu+0xf0/0x100
drain_workqueue+0xa0/0x110
destroy_workqueue+0x36/0x250
__loop_clr_fd+0x9a/0x660 [loop]
? blkdev_ioctl+0x8d/0x2a0
block_ioctl+0x3f/0x50
__x64_sys_ioctl+0x80/0xb0
do_syscall_64+0x38/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
asm/do_div.h is for div_u64, but it is found in math64.h. This change
will make compiler job easier and prevent compiler errors in situation
where compiler will not find math64.h from another paths.
Signed-off-by: Kari Argillander <kari.argillander@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The mount option max_inline ranges from 0 to the sectorsize (which is
now equal to page size). But we parse the mount options too early and
before the actual sectorsize is read from the superblock. So the upper
limit of max_inline is unaware of the actual sectorsize and is limited
by the temporary sectorsize 4096, even on a system where the default
sectorsize is 64K.
Fix this by reading the superblock sectorsize before the mount option
parse.
Reported-by: Alexander Tsvetkov <alexander.tsvetkov@oracle.com>
CC: stable@vger.kernel.org # 5.4+
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Support for expanded storage was only available until z13 and z/VM 6.3
respectively. However there haven't been any use cases a long time
before for this device driver.
Therefore remove it.
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
We do not have to reset the fh_list in the loop.
Signed-off-by: Pierre Morel <pmorel@linux.ibm.com>
Reviewed-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
With commit cc049eecfb ("s390/pci: simplify CLP List PCI handling")
clp_get_state() was changed to make use of the new clp_find_pci() helper
function to query a specific function. This however returns -ENODEV when
the device is not found at all and this error was passed to the caller.
It was missed however that the callers actually expect a success return
from clp_get_state() if the device is gone.
Fix this by handling the -ENODEV return of clp_find_pci() explicitly in
clp_get_state() returning success and setting the state parameter to
ZPCI_FN_STATE_RESERVED matching the design concept that a PCI function
that disappeared must have been resverved elsewhere. For all other error
returns continue to just pass them on to the caller.
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Fixes: cc049eecfb ("s390/pci: simplify CLP List PCI handling")
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Get rid of this warning:
drivers/s390/char/con3270.c:629:22: warning: cast between incompatible function types from ‘void (*)(struct raw3270_request *)’ to ‘void (*)(long unsigned int)’ [-Wcast-function-type]
629 | (void (*)(unsigned long)) con3270_read_tasklet,
| ^
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Move array from header to C file to avoid that it gets defined in
every C file where the header is included:
In file included from arch/s390/kernel/perf_cpum_cf_common.c:19:
./arch/s390/include/asm/cpu_mcf.h:27:18: warning: ‘cpumf_ctr_ctl’ defined but not used [-Wunused-const-variable=]
27 | static const u64 cpumf_ctr_ctl[CPUMF_CTR_SET_MAX] = {
| ^~~~~~~~~~~~~
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
The cpu hotplug notifiers are called without updating the core/thread
masks when a new CPU is added. This causes problems with code setting
up data structures in a cpu hotplug notifier, and relying on that later
in normal code.
This caused a crash in the new core scheduling code (SCHED_CORE),
where rq->core was set up in a notifier depending on cpu masks.
To fix this, add a cpu_setup_mask which is used in update_cpu_masks()
instead of the cpu_online_mask to determine whether the cpu masks should
be set for a certain cpu. Also move update_cpu_masks() to update the
masks before calling notify_cpu_starting() so that the notifiers are
seeing the updated masks.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Cc: <stable@vger.kernel.org>
[hca@linux.ibm.com: get rid of cpu_online_mask handling]
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
current_stack_pointer() simply returns current value of %r15. If
current_stack_pointer() caller allocates stack (which is the case in
unwind code) %r15 points to a stack frame allocated for callees, meaning
current_stack_pointer() caller (e.g. stack_trace_save) will end up in
the stacktrace. This is not expected by stack_trace_save*() callers and
causes problems.
current_frame_address() on the other hand returns function stack frame
address, which matches %r15 upon function invocation. Using it in
get_stack_pointer() makes it more aligned with x86 implementation
(according to BACKTRACE_SELF_TEST output) and meets stack_trace_save*()
caller's expectations, notably KCSAN.
Also make sure unwind_start is always inlined.
Reported-by: Nathan Chancellor <nathan@kernel.org>
Suggested-by: Marco Elver <elver@google.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Tested-by: Marco Elver <elver@google.com>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/patch.git-04dd26be3043.your-ad-here.call-01630504868-ext-6188@work.hours
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
The legacy ISA probe tries to probe the card repeatedly, and this
would conflict with the refactoring using devres. Put the card
creation out of the loop and only probe GUS object repeatedly.
Fixes: 5b88da3c80 ("ALSA: gus: Allocate resources with device-managed APIs")
Link: https://lore.kernel.org/r/20210907093930.29009-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
GUS card object may be repeatedly probed for the legacy ISA devices,
and the behavior doesn't fit with the devres resource management.
Revert partially back to the classical way for the snd_gus_card
object, so that the repeated calls of snd_gus_create() are allowed.
Fixes: 5b88da3c80 ("ALSA: gus: Allocate resources with device-managed APIs")
Reported-by: kernel test robot <oliver.sang@intel.com>
Link: https://lore.kernel.org/r/20210907093930.29009-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The parameter bond_params is a relatively large 192 byte sized
struct so pass it by reference rather than by value to reduce
copying.
Addresses-Coverity: ("Big parameter passed by value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEK3kIWJt9yTYMP3ehqclaivrt76kFAmE3C1cTHG1rbEBwZW5n
dXRyb25peC5kZQAKCRCpyVqK+u3vqQ3iB/sFd7JMKwxz9QbyYxtic+aMGC1soMKa
htgUcRHVgJoowOpsCypuODw63X586eZhJNiTxQR1/X1ITbmFt3fcHZBqqC7uxDjZ
xeN3KL4II/XONCaKk6uq1MfegMS92bwT9Yxk4RYa9/7p3lOWNCFW3U5OvuZ0ORCj
lRPzV1+TIczsZEtTgHXQT4HVkI1OVwxP/Ln/3hI9M2icLwekUDyHSYF3lcZgwJCu
s41w3nFD6T6/ByaaUBnUps1OcP/Dqz++qWtQU2Wj8E6U/x+EiLyddvWBzPX1ZAO9
vFnUirj+tdIBXjKbsgz+oLtNM6cah0Hi9uOA3xagxUmqf5PePj09wEHs
=5G2W
-----END PGP SIGNATURE-----
Merge tag 'linux-can-fixes-for-5.15-20210907' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
linux-can-fixes-for-5.15-20210907
Signed-off-by: David S. Miller <davem@davemloft.net>
First set of fixes for v5.15 and only iwlwifi patches this time. Most
important being support for new hardware and new firmware API.
I had already earlier applied a fix which also Linus applied to this
tree as commit 1476ff21ab ("iwl: fix debug printf format strings"),
but this doesn't seem to cause any conflicts so I left it there.
iwlwifi
* add support for firmware API 66
* add support for Samsung Galaxy Book Flex2 Alpha
* fix a leak happening every time module is loaded
* fix a printk compiler warning
-----BEGIN PGP SIGNATURE-----
iQFJBAABCgAzFiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmE23kUVHGt2YWxvQGNv
ZGVhdXJvcmEub3JnAAoJEG4XJFUm622blQYH/3LSvbLw2jPBdqQiDsYCRrOzpx2T
V0sjkrumsCberLfLZpFfMYKeuQD2GaJUI9mHeJ1sZlc9hi9EIaHpTkK+LZpH4OU1
wISTpr4l13sDmr5snV0sSoRbuyZGQ93jOasoloU1qM9eCvwMw7rUT6QYvm9KXnx5
+rP1WJ9N94OLVvaCDwFPqJQAPROqSY8ySdknYdZlI8hOo+wWCE1G8IS+q75865BH
uSu6ZdUb5r36ha99v4UAtTbvS/+BXnqbQbIdcqYVG8vnaM9FAJPkNp8+ewlUN0Lh
ZG+Uk+sLS9Ll1PXJEavNKdw/RdxEZ0aLb5kFIYLVI2t7WcnY7JYBEu98FJo=
=kwaC
-----END PGP SIGNATURE-----
Merge tag 'wireless-drivers-2021-09-07' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers
Kalle Valo says:
====================
wireless-drivers fixes for v5.15
First set of fixes for v5.15 and only iwlwifi patches this time. Most
important being support for new hardware and new firmware API.
I had already earlier applied a fix which also Linus applied to this
tree as commit 1476ff21ab ("iwl: fix debug printf format strings"),
but this doesn't seem to cause any conflicts so I left it there.
iwlwifi
* add support for firmware API 66
* add support for Samsung Galaxy Book Flex2 Alpha
* fix a leak happening every time module is loaded
* fix a printk compiler warning
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
One MIPS platform (mach-rc32434) defines GPIOBASE. This macro
conflicts with one of the same name in lpc_sch.c. Rename the latter one
to prevent the build error.
../drivers/mfd/lpc_sch.c:25: error: "GPIOBASE" redefined [-Werror]
25 | #define GPIOBASE 0x44
../arch/mips/include/asm/mach-rc32434/rb.h:32: note: this is the location of the previous definition
32 | #define GPIOBASE 0x050000
Cc: Denis Turischev <denis@compulab.co.il>
Fixes: e82c60ae7d ("mfd: Introduce lpc_sch for Intel SCH LPC bridge")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
This automatically selects between ioremap() and ioremap_np() on
platforms that require it, such as Apple SoCs.
Signed-off-by: Hector Martin <marcan@marcan.st>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
DMA-BUF sysfs statistics are an option of DMA-BUF. It does not make
much sense to bother the user with a question about DMA-BUF sysfs
statistics if DMA-BUF itself is not enabled. Worse, enabling the
statistics enables the feature.
Fixes: bdb8d06dfe ("dmabuf: Add the capability to expose DMA-BUF stats in sysfs")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210902124913.2698760-4-geert@linux-m68k.org
DMA-BUF debug checks are an option of DMA-BUF. Enabling DMABUF_DEBUG
without DMA_SHARED_BUFFER does not have any impact, as drivers/dma-buf/
is not entered during the build when DMA_SHARED_BUFFER is disabled.
Fixes: 84335675f2 ("dma-buf: Add debug option")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210902124913.2698760-3-geert@linux-m68k.org
The pdev maybe not a platform device, e.g. c_can_pci device, in this
case, calling to_platform_device() would not make sense. Also, per the
comment in drivers/net/can/c_can/c_can_ethtool.c, @bus_info should
match dev_name() string, so I am replacing this with dev_name() to fix
this issue.
[ 1.458583] BUG: unable to handle page fault for address: 0000000100000000
[ 1.460921] RIP: 0010:strnlen+0x1a/0x30
[ 1.466336] ? c_can_get_drvinfo+0x65/0xb0 [c_can]
[ 1.466597] ethtool_get_drvinfo+0xae/0x360
[ 1.466826] dev_ethtool+0x10f8/0x2970
[ 1.467880] sock_ioctl+0xef/0x300
Fixes: 2722ac986e ("can: c_can: add ethtool support")
Link: https://lore.kernel.org/r/20210906233704.1162666-1-ztong0001@gmail.com
Cc: stable@vger.kernel.org # 5.14+
Signed-off-by: Tong Zhang <ztong0001@gmail.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Since commit
| dd3bd23eb4 ("can: rcar_canfd: Add Renesas R-Car CAN FD driver")
the rcar_canfd driver can be compile tested on all architectures. On
non OF enabled archs, or archs where OF is optional (and disabled in
the .config) the compilation throws the following warning:
| drivers/net/can/rcar/rcar_canfd.c:2020:34: warning: unused variable 'rcar_canfd_of_table' [-Wunused-const-variable]
| static const struct of_device_id rcar_canfd_of_table[] = {
| ^
This patch fixes the warning by marking the variable
rcar_canfd_of_table as __maybe_unused.
Fixes: ac42240873 ("can: rcar: Kconfig: Add helper dependency on COMPILE_TEST")
Fixes: dd3bd23eb4 ("can: rcar_canfd: Add Renesas R-Car CAN FD driver")
Link: https://lore.kernel.org/all/20210907064537.1054268-1-mkl@pengutronix.de
Cc: linux-renesas-soc@vger.kernel.org
Cc: Cai Huoqing <caihuoqing@baidu.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
a recent refactor created a null pointer vx in snd_vx222_probe().
The vx pointer should have been populated in snd_vx222_create() as
suggested in earlier version, otherwise vx->core.ibl.size will throw an
error.
[ 1.298398] BUG: kernel NULL pointer dereference, address: 00000000000001d8
[ 1.316799] RIP: 0010:snd_vx222_probe+0x155/0x290 [snd_vx222]
Fixes: 3bde3359aa ("ALSA: vx222: Allocate resources with device-managed APIs")
Signed-off-by: Tong Zhang <ztong0001@gmail.com>
Link: https://lore.kernel.org/r/20210907014746.1445278-1-ztong0001@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
There were typos in the fallback definitions of dummy LaTeX macros
for systems without CJK fonts.
They cause build errors in "make pdfdocs" on such systems.
Fix them.
Fixes: e291ff6f5a ("docs: pdfdocs: Add CJK-language-specific font settings")
Signed-off-by: Akira Yokosawa <akiyks@gmail.com>
Link: https://lore.kernel.org/r/ad7615a5-f8fa-2bc3-de6b-7ed49d458964@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
The tb_test_credit_alloc_all() function had a huge number of
KUNIT_ASSERT() statements, all of which (though the magic of many many
layers of inscrutable macros) ended up allocating and initializing
various test assertion structures on the stack.
Don't do that. The kernel stack isn't infinite, and we have compiler
warnings (now errors) for the case where a stack frame grows too large.
Like it did here, by not an inconsiderable margin:
drivers/thunderbolt/test.c: In function ‘tb_test_credit_alloc_all’:
drivers/thunderbolt/test.c:2367:1: error: the frame size of 4500 bytes is larger than 2048 bytes [-Werror=frame-larger-than=]
2367 | }
| ^
Solve this similarly to the lib/test_scanf case: split out the tests
into several smaller functions, each just testing one particular tunnel
credit allocation.
This makes the i386 allyesconfig build work for me again.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It turns out that gcc has real trouble merging all the temporary
on-stack buffer allocation. So despite the fact that their lifetimes do
not overlap, gcc will allocate stack for all of them when they have
different types. Which they do in the number scanning test routines.
This is unfortunate in general, but with lots of test-cases in one
function, it becomes a real problem. gcc will allocate a huge stack
frame for no actual good reason.
We have tried to counteract this tendency of gcc not merging stack slots
(see "-fconserve-stack"), but that has limited effect (and should be on
by default these days, iirc).
So with all the debug options enabled on an i386 allmodconfig build, we
end up with overly big stack frames, and the resulting stack frame size
warnings (now errors):
lib/test_scanf.c: In function ‘numbers_list_field_width_val_width’:
lib/test_scanf.c:530:1: error: the frame size of 2088 bytes is larger than 2048 bytes [-Werror=frame-larger-than=]
530 | }
| ^
lib/test_scanf.c: In function ‘numbers_list_field_width_typemax’:
lib/test_scanf.c:488:1: error: the frame size of 2568 bytes is larger than 2048 bytes [-Werror=frame-larger-than=]
488 | }
| ^
lib/test_scanf.c: In function ‘numbers_list’:
lib/test_scanf.c:437:1: error: the frame size of 2088 bytes is larger than 2048 bytes [-Werror=frame-larger-than=]
437 | }
| ^
In this particular case, the reasonably straightforward solution is to
just split out the test routines into multiple more targeted versions.
That way we don't have one huge stack, but several smaller ones, and
they aren't active all at the same time.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The variable 'package_size' is an unsigned long, and should be printed
out using '%lu', not '%zd' (that would be for a size_t).
Yes, on many architectures (including x86-64), 'size_t' is in fact the
same type as 'long', but that's a fairly random architecture definition,
and on some platforms 'size_t' is in fact 'int' rather than 'long'.
That is the case on traditional 32-bit x86. Yes, both types are the
exact same 32-bit size, and it would all print out perfectly correctly,
but '%zd' ends up still being wrong.
And we can't make 'package_size' be a 'size_t', because we get the
actual value using efivar_entry_get() that takes a pointer to an
'unsigned long'. So '%lu' it is.
This fixes two of the i386 allmodconfig build warnings (that is now an
error due to -Werror).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-----BEGIN PGP SIGNATURE-----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=4SCA
-----END PGP SIGNATURE-----
Merge tag 'block-5.15-2021-09-05' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"Was going to send this one in later this week, but given that -Werror
is now enabled (or at least available), the mq-deadline fix really
should go in for the folks hitting that.
- Ensure dd_queued() is only there if needed (Geert)
- Fix a kerneldoc warning for bio_alloc_kiocb()
- BFQ fix for queue merging
- loop locking fix (Tetsuo)"
* tag 'block-5.15-2021-09-05' of git://git.kernel.dk/linux-block:
loop: reduce the loop_ctl_mutex scope
bio: fix kerneldoc documentation for bio_alloc_kiocb()
block, bfq: honor already-setup queue merges
block/mq-deadline: Move dd_queued() to fix defined but not used warning
-----BEGIN PGP SIGNATURE-----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=jgN5
-----END PGP SIGNATURE-----
Merge tag 'misc-5.15-2021-09-05' of git://git.kernel.dk/linux-block
Pull CDROM maintainer update from Jens Axboe:
"It's been about 22 years since I originally started maintaining the
CDROM code, and I just haven't been able to even get reviews done in a
timely fashion the last handful of years.
Time to pass it on, and Phillip has volunteered take over these
duties. I'll be helping as needed for the foreseeable future"
* tag 'misc-5.15-2021-09-05' of git://git.kernel.dk/linux-block:
cdrom: update uniform CD-ROM maintainership in MAINTAINERS file
-----BEGIN PGP SIGNATURE-----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=U7lH
-----END PGP SIGNATURE-----
Merge tag 'libata-5.15-2021-09-05' of git://git.kernel.dk/linux-block
Pull libata fixes from Jens Axboe:
"Fixes for queued trim on certain Samsung SSDs, in conjunction with
certain ATI controllers"
* tag 'libata-5.15-2021-09-05' of git://git.kernel.dk/linux-block:
libata: Add ATA_HORKAGE_NO_NCQ_ON_ATI for Samsung 860 and 870 SSD.
libata: add ATA_HORKAGE_NO_NCQ_TRIM for Samsung 860 and 870 SSDs
-----BEGIN PGP SIGNATURE-----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=QoQg
-----END PGP SIGNATURE-----
Merge tag 'for-5.15/io_uring-2021-09-04' of git://git.kernel.dk/linux-block
Pull io_uring fixes from Jens Axboe:
"As sometimes happens, two reports came in around the merge window open
that led to some fixes. Hence this one is a bit bigger than usual
followup fixes, but most of it will be going towards stable, outside
of the fixes that are addressing regressions from this merge window.
In detail:
- postgres is a heavy user of signals between tasks, and if we're
unlucky this can interfere with io-wq worker creation. Make sure
we're resilient against unrelated signal handling. This set of
changes also includes hardening against allocation failures, which
could previously had led to stalls.
- Some use cases that end up having a mix of bounded and unbounded
work would have starvation issues related to that. Split the
pending work lists to handle that better.
- Completion trace int -> unsigned -> long fix
- Fix issue with REGISTER_IOWQ_MAX_WORKERS and SQPOLL
- Fix regression with hash wait lock in this merge window
- Fix retry issued on block devices (Ming)
- Fix regression with links in this merge window (Pavel)
- Fix race with multi-shot poll and completions (Xiaoguang)
- Ensure regular file IO doesn't inadvertently skip completion
batching (Pavel)
- Ensure submissions are flushed after running task_work (Pavel)"
* tag 'for-5.15/io_uring-2021-09-04' of git://git.kernel.dk/linux-block:
io_uring: io_uring_complete() trace should take an integer
io_uring: fix possible poll event lost in multi shot mode
io_uring: prolong tctx_task_work() with flushing
io_uring: don't disable kiocb_done() CQE batching
io_uring: ensure IORING_REGISTER_IOWQ_MAX_WORKERS works with SQPOLL
io-wq: make worker creation resilient against signals
io-wq: get rid of FIXED worker flag
io-wq: only exit on fatal signals
io-wq: split bounded and unbounded work into separate lists
io-wq: fix queue stalling race
io_uring: don't submit half-prepared drain request
io_uring: fix queueing half-created requests
io-wq: ensure that hash wait lock is IRQ disabling
io_uring: retry in case of short read on block device
io_uring: IORING_OP_WRITE needs hash_reg_file set
io-wq: fix race between adding work and activating a free worker
Currently we have readl()/writel()/ioread*()/iowrite*() APIs in use.
Let's unify to use only ioread*()/iowrite*() variants.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The io.*_lo_hi() variants are not strictly needed on the x86 hardware
and especially the PCI bus. Replace them with regular accessors, but
leave headers in place in case of 32-bit build.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The strlcpy should not be used because it doesn't limit the source
length. As linus says, it's a completely useless function if you
can't implicitly trust the source string - but that is almost always
why people think they should use it! All in all the BSD function
will lead some potential bugs.
But the strscpy doesn't require reading memory from the src string
beyond the specified "count" bytes, and since the return value is
easier to error-check than strlcpy()'s. In addition, the implementation
is robust to the string changing out from underneath it, unlike the
current strlcpy() implementation.
Thus, We prefer using strscpy instead of strlcpy.
Signed-off-by: Jason Wang <wangborong@cdjrlc.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This reverts commit 9cf448c200.
This commit was added for equivalence with a similar fix to ip_gre.
That fix proved to have a bug. Upon closer inspection, ip6_gre is not
susceptible to the original bug.
So revert the unnecessary extra check.
In short, ipgre_xmit calls skb_pull to remove ipv4 headers previously
inserted by dev_hard_header. ip6gre_tunnel_xmit does not.
Link: https://lore.kernel.org/netdev/CA+FuTSe+vJgTVLc9SojGuN-f9YQ+xWLPKE_S4f=f+w+_P2hgUg@mail.gmail.com/#t
Fixes: 9cf448c200 ("ip6_gre: add validation for csum_start")
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
