The call to of_parse_phandle returns a node pointer with refcount
incremented thus it must be explicitly decremented after the last
usage.
581 static int mtk_iommu_probe(struct platform_device *pdev)
582 {
...
626 for (i = 0; i < larb_nr; i++) {
627 struct device_node *larbnode;
...
631 larbnode = of_parse_phandle(...);
632 if (!larbnode)
633 return -EINVAL;
634
635 if (!of_device_is_available(larbnode))
636 continue; ---> leaked here
637
...
643 if (!plarbdev)
644 return -EPROBE_DEFER; ---> leaked here
...
647 component_match_add_release(dev, &match, release_of,
648 compare_of, larbnode);
---> release_of will call of_node_put
649 }
...
650
Detected by coccinelle with the following warnings:
./drivers/iommu/mtk_iommu.c:644:3-9: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 631, but without a corresponding object release within this function.
Signed-off-by: Wen Yang <wen.yang99@zte.com.cn>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: iommu@lists.linux-foundation.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-mediatek@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Reviewed-by: Matthias Brugger <mbrugger@suse.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Use the new helpers dev_iommu_fwspec_get()/set() to access
the dev->iommu_fwspec pointer. This makes it easier to move
that pointer later into another struct.
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Tested-by: Yong Wu <yong.wu@mediatek.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
iommu_ops are not supposed to change at runtime.
Functions 'iommu_device_set_ops' and 'bus_set_iommu' working with
const iommu_ops provided by <linux/iommu.h>. So mark the non-const
structs as const.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
(Change the title to iommu/mediatek: xx)
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Move remaining definitions and declarations from include/linux/bootmem.h
into include/linux/memblock.h and remove the redundant header.
The includes were replaced with the semantic patch below and then
semi-automated removal of duplicated '#include <linux/memblock.h>
@@
@@
- #include <linux/bootmem.h>
+ #include <linux/memblock.h>
[sfr@canb.auug.org.au: dma-direct: fix up for the removal of linux/bootmem.h]
Link: http://lkml.kernel.org/r/20181002185342.133d1680@canb.auug.org.au
[sfr@canb.auug.org.au: powerpc: fix up for removal of linux/bootmem.h]
Link: http://lkml.kernel.org/r/20181005161406.73ef8727@canb.auug.org.au
[sfr@canb.auug.org.au: x86/kaslr, ACPI/NUMA: fix for linux/bootmem.h removal]
Link: http://lkml.kernel.org/r/20181008190341.5e396491@canb.auug.org.au
Link: http://lkml.kernel.org/r/1536927045-23536-30-git-send-email-rppt@linux.vnet.ibm.com
Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ley Foon Tan <lftan@altera.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Richard Kuo <rkuo@codeaurora.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Serge Semin <fancer.lancer@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
All iommu drivers use the default_iommu_map_sg implementation, and there
is no good reason to ever override it. Just expose it as iommu_map_sg
directly and remove the indirection, specially in our post-spectre world
where indirect calls are horribly expensive.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
In MediaTek's IOMMU design, When a iommu translation fault occurs
(HW can NOT translate the destination address to a valid physical
address), the IOMMU HW output the dirty data into a special memory
to avoid corrupting the main memory, this is called "protect memory".
the register(0x114) for protect memory is a little different between
mt8173 and mt2712.
In the mt8173, bit[30:6] in the register represents [31:7] of the
physical address. In the 4GB mode, the register bit[31] should be 1.
While in the mt2712, the bits don't shift. bit[31:7] in the register
represents [31:7] in the physical address, and bit[1:0] in the
register represents bit[33:32] of the physical address if it has.
Fixes: e6dec92308 ("iommu/mediatek: Add mt2712 IOMMU support")
Reported-by: Honghui Zhang <honghui.zhang@mediatek.com>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Now that the core API issues its own post-unmap TLB sync call, push that
operation out from the io-pgtable-arm-v7s internals into the users. For
now, we leave the invalidation implicit in the unmap operation, since
none of the current users would benefit much from any change to that.
Note that the conversion of msm_iommu is implicit, since that apparently
has no specific TLB sync operation anyway.
CC: Yong Wu <yong.wu@mediatek.com>
CC: Rob Clark <robdclark@gmail.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The commit ("iommu/mediatek: Enlarge the validate PA range
for 4GB mode") introduce the following build warning while ARCH=arm:
drivers/iommu/mtk_iommu.c: In function 'mtk_iommu_iova_to_phys':
include/linux/bitops.h:6:24: warning: left shift count >= width
of type [-Wshift-count-overflow]
#define BIT(nr) (1UL << (nr))
^
>> drivers/iommu/mtk_iommu.c:407:9: note: in expansion of macro 'BIT'
pa |= BIT(32);
drivers/iommu/mtk_iommu.c: In function 'mtk_iommu_probe':
include/linux/bitops.h:6:24: warning: left shift count >= width
of type [-Wshift-count-overflow]
#define BIT(nr) (1UL << (nr))
^
drivers/iommu/mtk_iommu.c:589:35: note: in expansion of macro 'BIT'
data->enable_4GB = !!(max_pfn > (BIT(32) >> PAGE_SHIFT));
Use BIT_ULL instead of BIT.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The commit ("iommu/mediatek: Enlarge the validate PA range
for 4GB mode") introduce the following build error:
drivers/iommu/mtk_iommu.c: In function 'mtk_iommu_hw_init':
>> drivers/iommu/mtk_iommu.c:536:30: error: 'const struct mtk_iommu_data'
has no member named 'm4u_type'; did you mean 'm4u_dom'?
if (data->enable_4GB && data->m4u_type != M4U_MT8173) {
This patch fix it, use "m4u_plat" instead of "m4u_type".
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This patch is for 4GB mode, mainly for 4 issues:
1) Fix a 4GB bug:
if the dram base is 0x4000_0000, the dram size is 0xc000_0000.
then the code just meet a corner case because max_pfn is
0x10_0000.
data->enable_4GB = !!(max_pfn > (0xffffffffUL >> PAGE_SHIFT));
It's true at the case above. That is unexpected.
2) In mt2712, there is a new register for the 4GB PA range(0x118)
we should enlarge the max PA range, or the HW will report
error.
The dram range is from 0x1_0000_0000 to 0x1_ffff_ffff in the 4GB
mode, we cut out the bit[32:30] of the SA(Start address) and
EA(End address) into this REG_MMU_VLD_PA_RNG(0x118).
3) In mt2712, the register(0x13c) is extended for 4GB mode.
bit[7:6] indicate the valid PA[32:33]. Thus, we don't mask the
value and print it directly for debug.
4) if 4GB is enabled, the dram PA range is from 0x1_0000_0000 to
0x1_ffff_ffff. Thus, the PA from iova_to_pa should also '|' BIT(32)
Signed-off-by: Honghui Zhang <honghui.zhang@mediatek.com>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
When system suspend, infra power domain may be off, and the iommu's
clock must be disabled when system off, or the iommu's bclk clock maybe
disabled after system resume.
Signed-off-by: Honghui Zhang <honghui.zhang@mediatek.com>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
After adding the global list for M4U HW, We get a chance to
move the pagetable allocation into the mtk_iommu_domain_alloc.
Let the domain_alloc do the right thing.
This patch is for fixing this problem[1].
[1]: https://patchwork.codeaurora.org/patch/53987/
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
In theory, If there are 2 M4U HWs, there should be 2 IOMMU domains.
But one IOMMU domain(4GB iova range) is enough for us currently,
It's unnecessary to maintain 2 pagetables.
Besides, This patch can simplify our consumer code largely. They don't
need map a iova range from one domain into another, They can share the
iova address easily.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The M4U IP blocks in mt2712 is MTK's generation2 M4U which use the
ARM Short-descriptor like mt8173, and most of the HW registers are
the same.
The difference is that there are 2 M4U HWs in mt2712 while there's
only one in mt8173. The purpose of 2 M4U HWs is for balance the
bandwidth.
Normally if there are 2 M4U HWs, there should be 2 iommu domains,
each M4U has a iommu domain.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The definition of MTK_M4U_TO_LARB and MTK_M4U_TO_PORT are shared by
all the gen2 M4U HWs. Thus, Move them out from mt8173-larb-port.h,
and put them into the c file.
Suggested-by: Honghui Zhang <honghui.zhang@mediatek.com>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Under certain circumstances, the io-pgtable code may end up issuing two
TLB sync operations without any intervening invalidations. This goes
badly for the M4U hardware, since it means the second sync ends up
polling for a non-existent operation to finish, and as a result times
out and warns. The io_pgtable_tlb_* helpers implement a high-level
optimisation to avoid issuing the second sync at all in such cases, but
in order to work correctly that requires all pagetable operations to be
serialised under a lock, thus is no longer applicable to all io-pgtable
users.
Since we're the only user actually relying on this flag for correctness,
let's reimplement it locally to avoid the headache of trying to make the
high-level version concurrency-safe for other users.
CC: Yong Wu <yong.wu@mediatek.com>
CC: Matthias Brugger <matthias.bgg@gmail.com>
Tested-by: Yong Wu <yong.wu@mediatek.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
And also move its remaining functionality to
iommu_device_register() and 'struct iommu_device'.
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Frank Rowand <frowand.list@gmail.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: devicetree@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
For each subsequent device assigned to the m4u_group after its initial
allocation, we need to take an additional reference. Otherwise, the
caller of iommu_group_get_for_dev() will inadvertently remove the
reference taken by iommu_group_add_device(), and the group will be
freed prematurely if any device is removed.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Convert DT component matching to use component_match_add_release().
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Our per-device data consists of the M4U instance and firmware-provided
list of LARB IDs, which is a perfect fit for the generic iommu_fwspec
machinery. Use that directly as a simpler alternative to the custom
archdata code.
CC: Yong Wu <yong.wu@mediatek.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Tested-by: Yong Wu <yong.wu@mediatek.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Move the struct defines of mtk iommu into a new header files for
common use.
Signed-off-by: Honghui Zhang <honghui.zhang@mediatek.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The device_node will be released in of_iommu_configure, it may be double
released if call of_node_put in mtk_iommu_of_xlate.
Signed-off-by: Honghui Zhang <honghui.zhang@mediatek.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Many IOMMUs support multiple page table formats, meaning that any given
domain may only support a subset of the hardware page sizes presented in
iommu_ops->pgsize_bitmap. There are also certain use-cases where the
creator of a domain may want to control which page sizes are used, for
example to force the use of hugepage mappings to reduce pagetable walk
depth.
To this end, add a per-domain pgsize_bitmap to represent the subset of
page sizes actually in use, to make it possible for domains with
different requirements to coexist.
Signed-off-by: Will Deacon <will.deacon@arm.com>
[rm: hijacked and rebased original patch with new commit message]
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The function can return negative value so it should be assigned to signed
variable. The patch changes also type of related i variable to make code
more compact and coherent.
The problem has been detected using patch
scripts/coccinelle/tests/unsigned_lesser_than_zero.cocci.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
When CONFIG_PM is unset, we get a harmless warning for this driver:
drivers/iommu/mtk_iommu.c:665:12: error: 'mtk_iommu_suspend' defined but not used [-Werror=unused-function]
drivers/iommu/mtk_iommu.c:680:12: error: 'mtk_iommu_resume' defined but not used [-Werror=unused-function]
Marking the functions as __maybe_unused gits rid of the two functions
and lets the compiler silently drop the object code, while still
doing syntax checking on them for build-time verification.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 0df4fabe20 ("iommu/mediatek: Add mt8173 IOMMU driver")
Signed-off-by: Joerg Roedel <jroedel@suse.de>
