We refactored the CrOS EC drivers moving part of the code from the MFD
subsystem to the platform chrome subsystem. During this change we needed
to rename some config options, so, update the defconfigs accordingly.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Gwendal Grignou <gwendal@chromium.org>
Tested-by: Gwendal Grignou <gwendal@chromium.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Now that we have the needed network scheduler, we can enable the ENETC
hardware support.
$ scripts/bloat-o-meter old-vmlinux vmlinux
add/remove: 19/2 grow/shrink: 12/0 up/down: 12852/-16 (12836)
[..]
Total: Before=20428273, After=20441109, chg +0.06%
Link: https://lore.kernel.org/r/20200707223114.16355-2-michael@walle.cc
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Newer network cards and switches support offloading of certain packet
scheduling, classifying and actions onto the hardware itself. For
example, time-aware and credit based schedulers. To use this feature we
have to enable the corresponding modules. Please note, that this will
also enable NET_SCHED and NET_CLS_ACT as builtin because there is no
module option. The enabled modules should get us a good foundation.
$ scripts/bloat-o-meter old-vmlinux vmlinux
add/remove: 446/215 grow/shrink: 48/31 up/down: 78445/-11519 (66926)
[..]
Total: Before=20452567, After=20519493, chg +0.33%
Link: https://lore.kernel.org/r/20200707223114.16355-1-michael@walle.cc
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
config option PCIE_RCAR internally selects PCIE_RCAR_HOST which builds
the same driver. So this patch renames CONFIG_PCIE_RCAR to
CONFIG_PCIE_RCAR_HOST so that PCIE_RCAR can be safely dropped from
Kconfig file.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/1589494238-2933-1-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Although the Kontron SMARC-sAL28 board is now supported, there is still
missing driver support for the hardware clock, audio interface and audio
codec. Let's enable them as modules (where possible).
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The i.MX SCU soc driver depends on SCU firmware driver, so it has to
use platform driver model for proper defer probe operation, since
it has no device binding in DT file, a simple platform device is
created together inside the platform driver. To make it more clean,
we can just move the entire SCU soc driver into imx firmware folder
and initialized by i.MX SCU firmware driver.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
kexec_file_load() syscall interface is now supported for
arm64 architecture as well via commits:
3751e728ce ("arm64: kexec_file: add crash dump support") and
3ddd9992a5 ("arm64: enable KEXEC_FILE config")].
This patch enables config KEXEC_FILE by default in the
arm64 defconfig, so that user-space tools like kexec-tools
can use the same as the default interface for kexec/kdump
on arm64.
Cc: AKASHI Takahiro <takahiro.akashi@linaro.org>
Cc: James Morse <james.morse@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: kexec@lists.infradead.org
Signed-off-by: Bhupesh Sharma <bhsharma@redhat.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/1586212300-30797-1-git-send-email-bhsharma@redhat.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Increase build and test coverage by enabling support for more hardware
present on Renesas SoCs and boards:
- Renesas Gigabit Ethernet Controller on R-Car V3H, as used on the
Condor and V3HSK boards,
- Sony IMX219 and OmniVision OV5645 cameras, as used on the
AISTARVISION MIPI Adapter V2.1,
- Analog Devices ADV7511 HDMI audio, as used on various boards
(Condor, Draak, Eagle, Ebisu, V3HSK, and V3MSK).
All of the above are modular, except for Ethernet support (HDMI Audio
support is an optional feature of the modular ADV7511 driver).
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20200630171500.11438-1-geert+renesas@glider.be
The IPCC hardware block provides a mechanism for triggering interrupts
between co-processors in recent Qualcomm SoCs. This is used as basis for
most form of communication between co-processors, so enable this
support.
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20200622222747.717306-7-bjorn.andersson@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
The SM8250 pinctrl driver provides pin configuration, pin muxing and
GPIO pin control for many pins on the SM8250 SoC.
Reviewed-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20200622220048.717073-1-bjorn.andersson@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
RPMPD provides us the CS/MX power domains needed to boot the modem
subsystem on msm8998 for wifi.
Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Link: https://lore.kernel.org/r/20200528184752.4747-1-jeffrey.l.hugo@gmail.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
- Enable RTC and ADC support of RN5T618 PMIC in imx_v6_v7_defconfig.
- Enable i.MX8DXL pinctrl driver support in arm64 defconfig.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAl7Ij6IUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM5peQf+N9PmhSdT/xgWUsudpYBTFGxZ7CP2
mkt86Qxdw5MboaR0Z+L1fsNRYglWU14Hn9GTvPmcoN7VTx6nDJnC55F5xWmP7r1C
ZgI9hH1jZG/jEWJAJmp0sZIBuaZJegUmbD1Pk3dOIMwv/9hEGtj2nI05QuUaTKof
qa8KxSwvYZSd8SKZHDoEl/E6yZZjNIlfMsv6BKTbRfqMHrixZ1y54muNNLKuca3v
hoI4I+AYPy3XhhACjYR3mhSVUF2pCVOpUcFktKdH+ZTLXX/dShMec5vyLwws+CEi
Oldg3J98qkDMnmMXV/1RLvYI/CIR6v7GbsashfinSAeeut6uPz4kgVyhpA==
=kqAi
-----END PGP SIGNATURE-----
Merge tag 'imx-defconfig-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/defconfig
i.MX defconfig update for 5.8:
- Enable RTC and ADC support of RN5T618 PMIC in imx_v6_v7_defconfig.
- Enable i.MX8DXL pinctrl driver support in arm64 defconfig.
* tag 'imx-defconfig-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: imx_v6_v7_defconfig: extend RN5T618 PMIC family support
arm64: defconfig: Enable CONFIG_PINCTRL_IMX8DXL by default
Link: https://lore.kernel.org/r/20200523032516.11016-6-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This patch adds a watchdog driver that can be used on ARM systems
with the appropriate watchdog implemented in Secure Monitor firmware.
The driver communicates with firmware via a Secure Monitor Call.
This may be useful for platforms using TrustZone that want
the Secure Monitor firmware to have the final control over the watchdog.
This is implemented on mt8173 chromebook devices oak, elm and hana in
arm trusted firmware file plat/mediatek/mt8173/drivers/wdt/wdt.c.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Signed-off-by: Evan Benn <evanbenn@chromium.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: Xingyu Chen<xingyu.chen@amlogic.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20200505131242.v6.2.Ia92bb4d4ce84bcefeba1d00aaa1c1e919b6164ef@changeid
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
- Enable PCI PASID as built-in module and UACCE/SEC2/HPRE as
loadable modules to support UACCE use case for the D06CS board
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=Oq8w
-----END PGP SIGNATURE-----
Merge tag 'hisi-arm64-defconfig-for-5.8' of git://github.com/hisilicon/linux-hisi into arm/defconfig
ARM64: hisilicon: defconfig updates for 5.8
- Enable PCI PASID as built-in module and UACCE/SEC2/HPRE as
loadable modules to support UACCE use case for the D06CS board
* tag 'hisi-arm64-defconfig-for-5.8' of git://github.com/hisilicon/linux-hisi:
arm64: defconfig: Enable UACCE/PCI PASID/SEC2/HPRE configs
Link: https://lore.kernel.org/r/5EBE4217.6000900@hisilicon.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This enables SM8250 GCC clock driver, SC7180 GCC clock driver and SC7180
TLMM pinctrl driver, the IPA and RMNET drivers, CCI, camera subsystem
and camera clock drivers and removes the now depricated GLINK_SSR entry.
-----BEGIN PGP SIGNATURE-----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=ukjE
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-defconfig-for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/defconfig
Qualcomm ARM64 defconfig updates for v5.8
This enables SM8250 GCC clock driver, SC7180 GCC clock driver and SC7180
TLMM pinctrl driver, the IPA and RMNET drivers, CCI, camera subsystem
and camera clock drivers and removes the now depricated GLINK_SSR entry.
* tag 'qcom-arm64-defconfig-for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
arm64: defconfig: enable Qualcomm IPA and RMNet modules
arm64: defconfig: Enable Qualcomm SC7180 pinctrl and gcc
arm64: defconfig: Remove QCOM_GLINK_SSR
arm64: defconfig: Enable SM8250 GCC driver
arm64: defconfig: Enable Qualcomm CAMCC, CAMSS and CCI drivers
Link: https://lore.kernel.org/r/20200519052502.1249888-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
defconfig to enable the audio codec in sunxi_defconfig.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCXr7MmQAKCRDj7w1vZxhR
xYFJAQC7OE0ip7aQrJY24AXQgeA1abiQ1+P1oHbHW6E7qnXiGgD9Exd18pO1N1JH
URcmEMjg8plFQn9+gGcHy7VFhE5V8w8=
=ut84
-----END PGP SIGNATURE-----
Merge tag 'sunxi-config-for-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/defconfig
Two patches to enable the new cpufreq support on the H6 for the arm64
defconfig to enable the audio codec in sunxi_defconfig.
* tag 'sunxi-config-for-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm64: configs: Enable sun50i cpufreq nvmem
ARM: configs: sunxi: Add sun8i analog codec
Link: https://lore.kernel.org/r/9fd4d403-f6c8-420d-8b03-62e8485a0b3d.lettre@localhost
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Enable building the Qualcomm IPA driver as a kernel module. To be
useful, the IPA driver also requires RMNet, so enable building that
as a module as well.
Signed-off-by: Alex Elder <elder@linaro.org>
Link: https://lore.kernel.org/r/20200518215455.10095-1-elder@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Commit 06b93644f4 ("media: Kconfig: add an option to filter in/out
platform drivers") adds a new Kconfig symbol which now hides drivers
currently enabled in the arm64 defconfig. Enable it to get those
drivers back.
Link: https://lore.kernel.org/r/20200427134003.45188-5-max.krummenacher@toradex.com
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add DRM_DISPLAY_CONNECTOR. This got introduced with the bridge rework
Which renamed among others DRM_DUMB_VGA_DAC.
Link: https://lore.kernel.org/r/20200427134003.45188-3-max.krummenacher@toradex.com
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Remove the QCOM_GLINK_SSR option from the arm64 defconfig, as the module
is assimilated by QCOM_GLINK - which is selected by other means.
Acked-by: Chris Lew <clew@codeaurora.org>
Acked-by: Rishabh Bhatnagar <rishabhb@codeaurora.org>
Link: https://lore.kernel.org/r/20200423003736.2027371-5-bjorn.andersson@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Enable the module config for the Amlogic GX audio card.
This module will imply the internal components usually associated
with it to make a functional sound card on these platforms.
Also enable the simple amplifier module which often used on the
output stage of those cards.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Tested-by: Christian Hewitt <christianshewitt@gmail.com>
Link: https://lore.kernel.org/r/20200421163935.775935-2-jbrunet@baylibre.com
Allwinner H6 needs this driver to be able to get
the correct speed_bin required for DVFS.
Enable this option in arm64 defconfig.
Signed-off-by: Clément Péron <peron.clem@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Commit c57247f940 ("PCI: tegra: Add support for PCIe endpoint mode in
Tegra194") updated the Tegra PCIe Kconfig symbol for building the Tegra
PCIe host controller driver. Following this change the Tegra PCIe host
controller driver is no longer built by default and so no works without
updating the arm64 defconfig. Fix this by updating the Kconfig symbol
in the arm64 for the Tegra PCIe host controller so that again it is
built by default.
Fixes: c57247f940 ("PCI: tegra: Add support for PCIe endpoint mode in Tegra194")
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
As usual, tons of new drivers and other options got merged and
are now enabled in the defconfig files, usually as loadable modules.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAl6EaVcACgkQmmx57+YA
GNmYTg/+OBcECrckvyq1LP5x1AnENle1QB4CTKH180TOKXu311IfkOvrDKw3sXlD
VkWyjayTjhv3LRmESJsps03qjYSSHNIOyyspqkTFov/qHZaDBfpDVeqNpnuKstrb
y7DWaNqkYNf1eV6vt2m4khplpnGP52OQLuNC2x8RTRdkDL1i5OfAs1UH3fGq6qsl
dGvfLF6yXKq4Y84Z8jUYGOz4/s1IsKbHK6hvTjocrBCdwqPRJgvLJkwy3X43kWaq
NDFerbLd+ZOYI5siVr5Rd95zt0JSOLkfGDJgpu/KAnotBJxzKmkF4VrKLh00i9NJ
QwpV/ndqImALDLeEKHUe0fDkCk9tbzsC8ApqNuv+M5KJ7C3J7O9UWyZm1tbsZcSJ
NNziz8jSTsp6tOEmLFeLPWdH/i+1j7WljVQaAkqvZuCAgGs24voqUuwvo+6Ulh5b
VLrfoE45VCIBgSch4VACzTdBbxVufO9yZkZZV2mlQEKdXFj1h2KaKZU0Lg9n5LRI
1UFgK+b8Dw2xVZWOxcivcav0GM3CMRd1ZW1ruHlrRcbPhM4JcUUqmmANKW+LmbLo
0+Rh6ZXywH8FtQVDq9DMsVqZxpmPbJF5gPw3T145mgEb32ogwLi7M5fcNkqm8KZR
KyZseaIg2iMnY25vTZmnQlafcyrTXix1OfD/gC06CaW9eMCueSM=
=NkVs
-----END PGP SIGNATURE-----
Merge tag 'arm-defconfig-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM defconfig updates from Arnd Bergmann:
"As usual, tons of new drivers and other options got merged and are now
enabled in the defconfig files, usually as loadable modules"
* tag 'arm-defconfig-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (45 commits)
ARM: omap2plus_defconfig: Update for moved and dropped options
ARM: omap2plus_defconfig: Enable ina2xx_adc as a loadable module
ARM: omap2plus_defconfig: Enable McPDM optional PMIC clock as modules
ARM: omap2plus_defconfig: Enable more droid4 devices as loadable modules
ARM: omap2plus_defconfig: Enable zram as loadable modules
ARM: omap2plus_defconfig: Enable simple-pm-bus
arm64: defconfig: Enable Qualcomm SDM845 audio configs
arm64: defconfig: Enable e1000 device
arm64: defconfig: Enable PHY devices used on QorIQ boards
arm64: defconfig: Enable RTC devices for QorIQ boards
arm64: defconfig: Enable flash device drivers for QorIQ boards
arm64: defconfig: Enable ARM Mali display driver
arm64: defconfig: Enable QorIQ GPIO driver
arm64: defconfig: Enable QorIQ IFC NAND controller driver
arm64: defconfig: Enable ARM SBSA watchdog driver
arm64: defconfig: Enable QorIQ cpufreq driver
arm64: defconfig: Enable NXP/FSL SPI controller drivers
arm64: defconfig: Enable ENETC Ethernet controller and FELIX switch
arm64: defconfig: Enable QorIQ DPAA2 drivers
arm64: defconfig: Enable QorIQ DPAA1 drivers
...
Pull networking updates from David Miller:
"Highlights:
1) Fix the iwlwifi regression, from Johannes Berg.
2) Support BSS coloring and 802.11 encapsulation offloading in
hardware, from John Crispin.
3) Fix some potential Spectre issues in qtnfmac, from Sergey
Matyukevich.
4) Add TTL decrement action to openvswitch, from Matteo Croce.
5) Allow paralleization through flow_action setup by not taking the
RTNL mutex, from Vlad Buslov.
6) A lot of zero-length array to flexible-array conversions, from
Gustavo A. R. Silva.
7) Align XDP statistics names across several drivers for consistency,
from Lorenzo Bianconi.
8) Add various pieces of infrastructure for offloading conntrack, and
make use of it in mlx5 driver, from Paul Blakey.
9) Allow using listening sockets in BPF sockmap, from Jakub Sitnicki.
10) Lots of parallelization improvements during configuration changes
in mlxsw driver, from Ido Schimmel.
11) Add support to devlink for generic packet traps, which report
packets dropped during ACL processing. And use them in mlxsw
driver. From Jiri Pirko.
12) Support bcmgenet on ACPI, from Jeremy Linton.
13) Make BPF compatible with RT, from Thomas Gleixnet, Alexei
Starovoitov, and your's truly.
14) Support XDP meta-data in virtio_net, from Yuya Kusakabe.
15) Fix sysfs permissions when network devices change namespaces, from
Christian Brauner.
16) Add a flags element to ethtool_ops so that drivers can more simply
indicate which coalescing parameters they actually support, and
therefore the generic layer can validate the user's ethtool
request. Use this in all drivers, from Jakub Kicinski.
17) Offload FIFO qdisc in mlxsw, from Petr Machata.
18) Support UDP sockets in sockmap, from Lorenz Bauer.
19) Fix stretch ACK bugs in several TCP congestion control modules,
from Pengcheng Yang.
20) Support virtual functiosn in octeontx2 driver, from Tomasz
Duszynski.
21) Add region operations for devlink and use it in ice driver to dump
NVM contents, from Jacob Keller.
22) Add support for hw offload of MACSEC, from Antoine Tenart.
23) Add support for BPF programs that can be attached to LSM hooks,
from KP Singh.
24) Support for multiple paths, path managers, and counters in MPTCP.
From Peter Krystad, Paolo Abeni, Florian Westphal, Davide Caratti,
and others.
25) More progress on adding the netlink interface to ethtool, from
Michal Kubecek"
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2121 commits)
net: ipv6: rpl_iptunnel: Fix potential memory leak in rpl_do_srh_inline
cxgb4/chcr: nic-tls stats in ethtool
net: dsa: fix oops while probing Marvell DSA switches
net/bpfilter: remove superfluous testing message
net: macb: Fix handling of fixed-link node
net: dsa: ksz: Select KSZ protocol tag
netdevsim: dev: Fix memory leak in nsim_dev_take_snapshot_write
net: stmmac: add EHL 2.5Gbps PCI info and PCI ID
net: stmmac: add EHL PSE0 & PSE1 1Gbps PCI info and PCI ID
net: stmmac: create dwmac-intel.c to contain all Intel platform
net: dsa: bcm_sf2: Support specifying VLAN tag egress rule
net: dsa: bcm_sf2: Add support for matching VLAN TCI
net: dsa: bcm_sf2: Move writing of CFP_DATA(5) into slicing functions
net: dsa: bcm_sf2: Check earlier for FLOW_EXT and FLOW_MAC_EXT
net: dsa: bcm_sf2: Disable learning for ASP port
net: dsa: b53: Deny enslaving port 7 for 7278 into a bridge
net: dsa: b53: Prevent tagged VLAN on port 7 for 7278
net: dsa: b53: Restore VLAN entries upon (re)configuration
net: dsa: bcm_sf2: Fix overflow checks
hv_netvsc: Remove unnecessary round_up for recv_completion_cnt
...
Pull scheduler updates from Ingo Molnar:
"The main changes in this cycle are:
- Various NUMA scheduling updates: harmonize the load-balancer and
NUMA placement logic to not work against each other. The intended
result is better locality, better utilization and fewer migrations.
- Introduce Thermal Pressure tracking and optimizations, to improve
task placement on thermally overloaded systems.
- Implement frequency invariant scheduler accounting on (some) x86
CPUs. This is done by observing and sampling the 'recent' CPU
frequency average at ~tick boundaries. The CPU provides this data
via the APERF/MPERF MSRs. This hopefully makes our capacity
estimates more precise and keeps tasks on the same CPU better even
if it might seem overloaded at a lower momentary frequency. (As
usual, turbo mode is a complication that we resolve by observing
the maximum frequency and renormalizing to it.)
- Add asymmetric CPU capacity wakeup scan to improve capacity
utilization on asymmetric topologies. (big.LITTLE systems)
- PSI fixes and optimizations.
- RT scheduling capacity awareness fixes & improvements.
- Optimize the CONFIG_RT_GROUP_SCHED constraints code.
- Misc fixes, cleanups and optimizations - see the changelog for
details"
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (62 commits)
threads: Update PID limit comment according to futex UAPI change
sched/fair: Fix condition of avg_load calculation
sched/rt: cpupri_find: Trigger a full search as fallback
kthread: Do not preempt current task if it is going to call schedule()
sched/fair: Improve spreading of utilization
sched: Avoid scale real weight down to zero
psi: Move PF_MEMSTALL out of task->flags
MAINTAINERS: Add maintenance information for psi
psi: Optimize switching tasks inside shared cgroups
psi: Fix cpu.pressure for cpu.max and competing cgroups
sched/core: Distribute tasks within affinity masks
sched/fair: Fix enqueue_task_fair warning
thermal/cpu-cooling, sched/core: Move the arch_set_thermal_pressure() API to generic scheduler code
sched/rt: Remove unnecessary push for unfit tasks
sched/rt: Allow pulling unfitting task
sched/rt: Optimize cpupri_find() on non-heterogenous systems
sched/rt: Re-instate old behavior in select_task_rq_rt()
sched/rt: cpupri_find: Implement fallback mechanism for !fit case
sched/fair: Fix reordering of enqueue/dequeue_task_fair()
sched/fair: Fix runnable_avg for throttled cfs
...
Enable TI K3 AM654x/J721E DMA and networking options.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Tested-by: Murali Karicheri <m-karicheri2@ti.com>
Tested-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
- A seris from Li Yang to make defconfig useful for NXP LS family SoCs.
Most drivers are built as module there, but those helping boot system
with NFS are enabled built-in.
- Enable i.MX8MP pinctrl and i.MX8MM thermal driver support in
defconfig.
- Enable i.MX DRM driver support for multi_v7_defconfig.
- Enable ATMEL_MXT and AD7879 touch support for imx_v6_v7_defconfig.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAl5xnT0UHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM7/cwf/W3mjSLA4MhY8brUydqYYlPTPDhZT
ZNvQLG8/dfeCnfuTF9Z8kXTkEXI+CgyzzLwWvRSxPDIvCcxFV38yjWEWodMWSMPc
gTPMHkRRCu63VuE0suwDSDsaPn4/g3s5E51kFzSoEnSSy0n+fVmXJosVoB9bEDNF
o15R3qT7leFwoR+bAB+h7X8EloPCC7QzZKpKZfNlIFfDd6aMObo1++HY+FqeNy7S
88lD+JdW2yyoj9r9Qkx3k/c3Hh+1uMysIM8FsVqeYSPGSrN8eK+wA5CqtHQ3TF8/
jcB7LdH0US8qL3oSnweCuT3Pb6zRtQwrsnpMZVR7Urue6Thq9i08jVuvUw==
=5yPc
-----END PGP SIGNATURE-----
Merge tag 'imx-defconfig-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/config
i.MX defconfig changes for 5.7:
- A seris from Li Yang to make defconfig useful for NXP LS family SoCs.
Most drivers are built as module there, but those helping boot system
with NFS are enabled built-in.
- Enable i.MX8MP pinctrl and i.MX8MM thermal driver support in
defconfig.
- Enable i.MX DRM driver support for multi_v7_defconfig.
- Enable ATMEL_MXT and AD7879 touch support for imx_v6_v7_defconfig.
* tag 'imx-defconfig-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (22 commits)
arm64: defconfig: Enable e1000 device
arm64: defconfig: Enable PHY devices used on QorIQ boards
arm64: defconfig: Enable RTC devices for QorIQ boards
arm64: defconfig: Enable flash device drivers for QorIQ boards
arm64: defconfig: Enable ARM Mali display driver
arm64: defconfig: Enable QorIQ GPIO driver
arm64: defconfig: Enable QorIQ IFC NAND controller driver
arm64: defconfig: Enable ARM SBSA watchdog driver
arm64: defconfig: Enable QorIQ cpufreq driver
arm64: defconfig: Enable NXP/FSL SPI controller drivers
arm64: defconfig: Enable ENETC Ethernet controller and FELIX switch
arm64: defconfig: Enable QorIQ DPAA2 drivers
arm64: defconfig: Enable QorIQ DPAA1 drivers
arm64: defconfig: Enable NXP flexcan driver
arm64: defconfig: run through savedefconfig for ordering
arm64: defconfig: Enable CONFIG_IMX8MM_THERMAL as module
arm64: defconfig: add i.MX system controller thermal support
ARM: multi_v7_defconfig: enable drm imx support
arm64: defconfig: Enable CONFIG_PCIE_LAYERSCAPE_GEN4
ARM: imx_v6_v7_defconfig: Enable TOUCHSCREEN_AD7879
...
Link: https://lore.kernel.org/r/20200318051918.32579-6-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Enable SDM845 audio, display and gpu related configs and the Truly
NT35597 panel driver, all relevant for various SDM845 based boards.
Enable IPQ6018 clocks and pinctrl and the pmic vibrator driver for
PM8916.
-----BEGIN PGP SIGNATURE-----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=GDt8
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-defconfig-for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/config
Qualcomm ARM64 defconfig updates for v5.7
Enable SDM845 audio, display and gpu related configs and the Truly
NT35597 panel driver, all relevant for various SDM845 based boards.
Enable IPQ6018 clocks and pinctrl and the pmic vibrator driver for
PM8916.
* tag 'qcom-arm64-defconfig-for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
arm64: defconfig: Enable Qualcomm SDM845 audio configs
arm64: defconfig: Enable Truly NT35597 WQXGA panel
arm64: defconfig: Enable Qualcomm SDM845 display and gpu clocks
arm64: defconfig: Enable qcom ipq6018 clock and pinctrl
arm64: defconfig: Enable Qualcomm PM8XXX vibrator support
Link: https://lore.kernel.org/r/20200318043856.GB470201@yoga
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Enable MEGARAID_SAS to be able to boot from
disk for the D06CS development board
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=+dLX
-----END PGP SIGNATURE-----
Merge tag 'hisi-arm64-defconfig-for-5.7' of git://github.com/hisilicon/linux-hisi into arm/config
ARM64: hisilicon: defconfig updates for 5.7
- Enable MEGARAID_SAS to be able to boot from
disk for the D06CS development board
* tag 'hisi-arm64-defconfig-for-5.7' of git://github.com/hisilicon/linux-hisi:
arm64: defconfig: Enable MEGARAID_SAS
Link: https://lore.kernel.org/r/5E61F3C1.1080909@hisilicon.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Enable soundwire, slimbus frameworks, the machine driver and the codec
drivers for WCD934x and WSA881x used on varios SDM845 based designs.
Tested-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20200315050827.1575421-1-bjorn.andersson@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Enables e1000 Ethernet device as it is used as a low-cost failover
Ethernet port on various QorIQ reference boards. Enabled as built-in
for booting from network without initramfs.
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Enables various PHY device drivers and PHY MUX drivers used on QorIQ
reference boards supported in mainline kernel.
Enabled as built-in to boot from network without an initramfs.
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Enables the RTC devices used on QorIQ reference boards supported in
mainline kernel.
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Enable the flash devices used on NXP/FSL QorIQ reference boards
supported in mainline kernel. Drivers are enabled as built-in for RFS
access without initramfs.
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Enables the Mali display driver for the display port on NXP LS1028a SoC.
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Enables generic GPIO driver for varous QorIQ SoCs. The driver can only
be built-in right now.
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Enables NXP/FSL QorIQ IFC flash controller driver for NAND. Enabled as
built-in to load RFS from nand flash without initramfs.
Remove CONFIG_MEMORY as it is selected by CONFIG_MTD_NAND_FSL_IFC.
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Enables ARM generic SBSA compatible watchdog driver for NXP LX2160a SoC.
Enabled as built-in for it is a core feature.
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Enables the generic QorIQ cpufreq driver to support frequency scaling
for various QorIQ SoCs. Enabled as built-in as it is a core feature.
Remove CONFIG_CLK_QORIQ as it is seleted by CONFIG_QORIQ_CPUFREQ.
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Enables SPI controller drivers used in various NXP/FSL SoCs.
QSPI is fast enough to connect big flash for file system. It is used to
connect 512MB NAND flash and 256MB NOR flash on LS1028RDB. It is used
as bootsource for other platforms like LS2080ardb too. Enabled as
built-in to load RFS from SPI flash without requiring initramfs.
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Enables drivers for NXP ENETC Ethernet controller and FELIX Ethernet
switch used on QorIQ LS1028a SoC.
The ENETC ethernet drivers are enabled as built-in to boot from network
without an initramfs.
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Enables drivers for NXP DPAA2 framework, related Ethernet and crypto
device which can be found on QorIQ SoCs like LS1088a, LS2088a and
LX2160a.
The framework and ethernet drivers are enabled as built-in to boot
from network without an initramfs.
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Enables drivers for NXP DPAA1 framework and related Ethernet device which
can be found on QorIQ SoCs such as LS1043a and LS1046a. They are enabled
as built-in to boot from network without an initramfs.
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Enables driver for FLEXCAN device which is used on a wide range of NXP
SoCs. Also enabling the related CAN framework.
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Used "make defconfig savedefconfig" to regenerate defconfig files in the
right order to prepare for additional defconfig changes.
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The (CFS) scheduler has some extra logic catering to systems with SMT, but
that logic won't be compiled in unless the above config is set.
Note that the SMT-centric codepaths are gated by the sched_smt_present
static key, and the SMT sched_domains will only survive if the platform has
SMT. As such, the only impact on !SMT platforms should be a slightly
bigger kernel - no behavioural change.
Distro kernels already enable it, which makes sense since there already are
things like ThunderX2 out in the wild. Enable it for the defconfig.
Some deltas
===========
FWIW my ELF symbol table diff looks something like this:
NAME BEFORE AFTER DELTA
update_sd_lb_stats.constprop.135 0 1864 +1864
find_idlest_group.isra.115 0 1808 +1808
update_numa_stats.isra.121 0 628 +628
select_task_rq_fair 3236 3732 +496
compute_energy.isra.112 0 420 +420
score_nearby_nodes.part.120 0 380 +380
__update_idle_core 0 232 +232
nohz_balance_exit_idle.part.127 0 216 +216
sched_slice.isra.99 0 172 +172
update_load_avg.part.107 0 116 +116
wakeup_preempt_entity.isra.101 0 92 +92
sched_cpu_activate 340 396 +56
pick_next_task_idle 8 56 +48
sched_cpu_deactivate 252 292 +40
show_smt_active 44 80 +36
cpu_smt_mask 0 28 +28
set_next_task_idle 4 32 +28
task_numa_work 680 692 +12
cpu_smt_flags 0 8 +8
enqueue_task_fair 2608 2612 +4
wakeup_preempt_entity.isra.104 92 0 -92
update_load_avg 1028 932 -96
task_numa_migrate 1824 1728 -96
sched_slice.isra.102 172 0 -172
nohz_balance_exit_idle.part.130 216 0 -216
task_numa_find_cpu 2116 1868 -248
score_nearby_nodes.part.123 380 0 -380
compute_energy.isra.115 420 0 -420
update_numa_stats.isra.124 472 0 -472
find_idlest_group.isra.118 1808 0 -1808
update_sd_lb_stats.constprop.138 1864 0 -1864
------------------------------------------------------------------
DELTA SUM +820
As for the sched_domains, this is on a hikey960:
before:
$ cat /proc/sys/kernel/sched_domain/cpu*/domain*/name | sort | uniq
DIE
MC
after:
$ cat /proc/sys/kernel/sched_domain/cpu*/domain*/name | sort | uniq
DIE
MC
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lkml.kernel.org/r/20200227191433.31994-3-valentin.schneider@arm.com
Our new dev board (Huawei D06CS) has a MegaRAID SAS HBA as the storage
controller, and we cannot access the HiSilicon SAS HBA, which we normally
use; so enable the driver config option so we can boot a distro with the
default defconfig.
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
- Restore R-Car M3-W support,
- Drop deprecated compatible value to ease DT binding conversion to
json-schema.
-----BEGIN PGP SIGNATURE-----
iHQEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCXlY78AAKCRCKwlD9ZEnx
cAR9APdKGcY7roK82m1uLIsCohHOdwikY4qvR+cVniRKgwspAP9Q3NNCXhelEEed
S2JMLficspDnR+BuWR3gyg173Z74CQ==
=P/qq
-----END PGP SIGNATURE-----
Merge tag 'renesas-fixes-for-v5.6-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/fixes
Renesas Fixes for v5.6
- Restore R-Car M3-W support,
- Drop deprecated compatible value to ease DT binding conversion to
json-schema.
* tag 'renesas-fixes-for-v5.6-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
ARM: dts: r8a7779: Remove deprecated "renesas, rcar-sata" compatible value
arm64: defconfig: Replace ARCH_R8A7796 by ARCH_R8A77960
Link: https://lore.kernel.org/r/20200226105236.18368-1-geert+renesas@glider.be
Signed-off-by: Olof Johansson <olof@lixom.net>
Enable the drivers for the display and gpu clock controllers on Qualcomm
SDM845, needed in order to get these features working. These drivers
provides power-domains and can as such not be compiled as modules.
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20191109024234.1757452-1-bjorn.andersson@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
The pm8xxx-vibrator driver controls the vibrator motor driver
available in the Qualcomm PM8916 PMIC.
Build the driver as module so it can be loaded when necessary.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Enable CONFIG_PINCTRL_IMX8MP by default to support i.MX8MP
pinctrl driver.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
the following:
- Nicolas enables the BCM2835 DMA engine controller as built-in since
the bcm2835 SD host controller depends on the DMA engine to be
available.
-----BEGIN PGP SIGNATURE-----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=8I22
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-5.6/defconfig-arm64-fixes' of https://github.com/Broadcom/stblinux into arm/fixes
This pull request contains ARM64 defconfig changes for v5.6, please pull
the following:
- Nicolas enables the BCM2835 DMA engine controller as built-in since
the bcm2835 SD host controller depends on the DMA engine to be
available.
* tag 'arm-soc/for-5.6/defconfig-arm64-fixes' of https://github.com/Broadcom/stblinux:
arm64: defconfig: Set bcm2835-dma as built-in
Link: https://lore.kernel.org/r/20200210145621.22599-1-f.fainelli@gmail.com
Signed-off-by: Olof Johansson <olof@lixom.net>
Now, Allwiner MIPI-DSI support is available for ARM64
Allwinner SoC like A64. So, let's build it as a module.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Many sunxi based board needs CONFIG_SUN8I_THERMAL for thermal support.
Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
With the introduction of 738987a1d6 ("mmc: bcm2835: Use
dma_request_chan() instead dma_request_slave_channel()") sdhost-bcm2835
now waits for its DMA channel to be available when defined in the
device-tree (it would previously default to PIO). Albeit the right
behaviour, the MMC host is needed for booting. So this makes sure the
DMA channel shows up in time.
Fixes: 738987a1d6 ("mmc: bcm2835: Use dma_request_chan() instead dma_request_slave_channel()")
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
We keep this in a separate branch to avoid cross-branch conflicts, but
most of the material here is fairly boring -- some new drivers turned on
for hardware since they were merged, and some refreshed files due to
time having moved a lot of entries around.
-----BEGIN PGP SIGNATURE-----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=8F5r
-----END PGP SIGNATURE-----
Merge tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC defconfig updates from Olof Johansson:
"We keep this in a separate branch to avoid cross-branch conflicts, but
most of the material here is fairly boring -- some new drivers turned
on for hardware since they were merged, and some refreshed files due
to time having moved a lot of entries around"
* tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (38 commits)
ARM: configs: at91: enable MMC_SDHCI_OF_AT91 and MICROCHIP_PIT64B
arm64: defconfig: Enable Broadcom's GENET Ethernet controller
ARM: multi_v7_defconfig: Enable devfreq thermal integration
ARM: exynos_defconfig: Enable devfreq thermal integration
ARM: multi_v7_defconfig: Enable NFS v4.1 and v4.2
ARM: exynos_defconfig: Enable NFS v4.1 and v4.2
arm64: defconfig: Enable Actions Semi specific drivers
arm64: defconfig: Enable Broadcom's STB PCIe controller
arm64: defconfig: Enable CONFIG_CLK_IMX8MP by default
ARM: configs: at91: enable config flags for sam9x60 SoC
ARM: configs: at91: use savedefconfig
arm64: defconfig: Enable tegra XUDC support
ARM: defconfig: gemini: Update defconfig
arm64: defconfig: enable CONFIG_ARM_QCOM_CPUFREQ_NVMEM
arm64: defconfig: enable CONFIG_QCOM_CPR
arm64: defconfig: Enable HFPLL
arm64: defconfig: Enable CRYPTO_DEV_FSL_CAAM
ARM: imx_v6_v7_defconfig: Select the TFP410 driver
ARM: imx_v6_v7_defconfig: Enable NFS_V4_1 and NFS_V4_2 support
arm64: defconfig: Enable ATH10K_SNOC
...
This builds the BCM2711 thermal driver as module for the Raspberry Pi 4.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/1578941778-23321-5-git-send-email-stefan.wahren@i2se.com
for 5.6, please pull the following:
- Nicolas enables the Broadcom GENET controller and Broadcom STB PCIe
Root Complex driver as a module for the ARM64 defconfig. The PCIe RC
driver will go through the PCIe maintainers pull request for 5.6.
-----BEGIN PGP SIGNATURE-----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=UsZS
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-5.6/defconfig-arm64' of https://github.com/Broadcom/stblinux into arm/defconfig
This pull request contains Broadcom ARM64-based SoCs defconfig changes
for 5.6, please pull the following:
- Nicolas enables the Broadcom GENET controller and Broadcom STB PCIe
Root Complex driver as a module for the ARM64 defconfig. The PCIe RC
driver will go through the PCIe maintainers pull request for 5.6.
* tag 'arm-soc/for-5.6/defconfig-arm64' of https://github.com/Broadcom/stblinux:
arm64: defconfig: Enable Broadcom's GENET Ethernet controller
arm64: defconfig: Enable Broadcom's STB PCIe controller
Link: https://lore.kernel.org/r/20200117222705.25391-1-f.fainelli@gmail.com
Signed-off-by: Olof Johansson <olof@lixom.net>
Currently used on the Raspberry Pi 4 and various Broadcom STB SoCs.
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
- Enable i.MX8MP clock driver in arm64 defconfig.
- Enable Crypto CAAM driver support as module in arm64 defconfig.
- Enable ILI210X touch driver, USB CDC ACM function, NFS_V4 support and
TFP410 DVI bridge driver support in arm32 imx_v6_v7_defconfig.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAl4b4oUUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM7iqQgAm/j9aO61exErck4aI9+krqrLnF3w
eWgrrovPEwSARQo69bTAGK5GYjaZ4yGlDiH3Qk6TS5pvcRsEjaxsu/Ym/KVDtOBM
iiLD9MbI7w8Nd5pe4jBkCHF6ZOEWbMvzwc8zStM/RwTVvwajdkW/p1If4RQGEqmM
ZcMgXLcQneqWAbCsFDziAwsf6kfOhOghW3CNQ63GuGZc4UFRv8j056mBlG8PDeLL
4UbT+rI1xwwatNg9a2/E0HfA3Z4eJg1YbjMTrEx4NDkDel2Sz9GuVxJIY1+/lDKs
DCw4n1Fzfn4nxR8Eak7foQPY27VLgDqa6zM06QYhQXE3wWt2HumxJNQkmQ==
=H+6R
-----END PGP SIGNATURE-----
Merge tag 'imx-defconfig-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/defconfig
i.MX defconfig update for 5.6:
- Enable i.MX8MP clock driver in arm64 defconfig.
- Enable Crypto CAAM driver support as module in arm64 defconfig.
- Enable ILI210X touch driver, USB CDC ACM function, NFS_V4 support and
TFP410 DVI bridge driver support in arm32 imx_v6_v7_defconfig.
* tag 'imx-defconfig-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: defconfig: Enable CONFIG_CLK_IMX8MP by default
arm64: defconfig: Enable CRYPTO_DEV_FSL_CAAM
ARM: imx_v6_v7_defconfig: Select the TFP410 driver
ARM: imx_v6_v7_defconfig: Enable NFS_V4_1 and NFS_V4_2 support
ARM: configs: imx_v6_v7_defconfig: enable USB ACM
ARM: imx_v6_v7_defconfig: Enable TOUCHSCREEN_ILI210X
Link: https://lore.kernel.org/r/20200113034006.17430-6-shawnguo@kernel.org
Signed-off-by: Olof Johansson <olof@lixom.net>
This enables the USB GPIO connector and Tegra XUDC drivers in the
default configuration.
-----BEGIN PGP SIGNATURE-----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=RP5m
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-5.6-arm64-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/defconfig
arm64: tegra: Default configuration updates for v5.6-rc1
This enables the USB GPIO connector and Tegra XUDC drivers in the
default configuration.
* tag 'tegra-for-5.6-arm64-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: defconfig: Enable tegra XUDC support
Link: https://lore.kernel.org/r/20200111005526.2413959-1-thierry.reding@gmail.com
Signed-off-by: Olof Johansson <olof@lixom.net>
For now mainly used in the Raspberry Pi 4.
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Select CONFIG_CLK_IMX8MP by default to support i.MX8MP clock driver.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The high frequency pll is required on compatible Qualcomm SoCs to
support the CPU frequency scaling feature.
Co-developed-by: Niklas Cassel <niklas.cassel@linaro.org>
Signed-off-by: Niklas Cassel <niklas.cassel@linaro.org>
Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20191125142511.681149-6-niklas.cassel@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Both the i.MX8MQ and i.MX8M Mini support the CAAM driver, but it
is currently not enabled by default.
This patch enables this as a module.
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The ath10k snoc is found on the Qualcomm QCS404 and SDM845, so enable
the driver for this.
Tested-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Reviewed-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20191028171837.3907550-1-bjorn.andersson@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Enable PDC interrupt controller for SDM845 devices. The interrupt
controller can detect wakeup capable interrupts when the SoC is in a low
power state.
Signed-off-by: Lina Iyer <ilina@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/1573855915-9841-13-git-send-email-ilina@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Enable the driver for the watchdog found in the application processor
subsystem on most modern Qualcomm platforms.
Tested-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Most Qualcomm platforms contain a pseudo random number generator
hardware block. Enable the driver for this block and also enable the
interface for exposing this to userspace.
Tested-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
This enables display on the Lenovo Yoga C630 by connecting the DSI output
from the SoC to the eDP input of the panel.
Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
This enables Bluetooth on the Lenovo Yoga C630.
Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
The Qualcomm CPUfreq HW provides CPU voltage and frequency scaling on
many modern Qualcomm SoCs. Enable the driver for this hardware block to
enable this functionality on the SDM845 platform.
Tested-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
The Qualcomm socinfo driver provides SoC information to userspace using
the standard soc interface as well as a number of debugfs entries.
Enable this to allow certain user space tools to acquire this
information, as well as getting developers access to the information in
debugfs that is useful when reporting bugs.
Tested-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Enable the drivers for GENI SPI and QSPI controllers found on the
Qualcomm SDM845 platform, among others.
Tested-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Enable the the power domains, reset controllers and remote block device
memory access drivers necessary to boot the Audio, Compute and Modem
DSPs on Qualcomm SDM845.
None of the power domains are system critical, but needs to be builtin
as the driver core prohibits probe deferal past late initcall.
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Tested-by: Alex Elder <elder@linaro.org>
Tested-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
This is mostly to reorder the entries as they've moved in the Kconfig
hierarchies. Doing this periodically (but not very often) simplifies
conflict resolution for new options, etc.
Link: https://lore.kernel.org/r/20191205211438.27552-3-olof@lixom.net
Signed-off-by: Olof Johansson <olof@lixom.net>
We keep this in a separate branch to avoid cross-branch conflicts, but
most of the material here is fairly boring -- some new drivers turned on
for hardware since they were merged, and some refreshed files due to
time having moved a lot of entries around.
-----BEGIN PGP SIGNATURE-----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=rTWJ
-----END PGP SIGNATURE-----
Merge tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC defconfig updates from Olof Johansson:
"We keep this in a separate branch to avoid cross-branch conflicts, but
most of the material here is fairly boring -- some new drivers turned
on for hardware since they were merged, and some refreshed files due
to time having moved a lot of entries around"
* tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (36 commits)
ARM: config: multi_v5: ASPEED SDHCI, SGPIO
ARM: configs: multi_v7: ASPEED network, gpio, FSI
ARM: config: aspeed-g4: Add MMC, and cleanup
ARM: config: aspeed-g5: Add SGPIO and FSI drivers
ARM: config: aspeed-g5: Enable 8250_DW quirks
arm64: defconfig: Change CONFIG_AT803X_PHY from m to y
ARM: shmobile: defconfig: Refresh for v5.4-rc1
arm64: defconfig: Enable R8A77961 SoC
ARM: configs: sunxi: Enable MICREL_PHY
arm64: defconfig: add new Allwinner crypto options
ARM: configs: sunxi: add new Allwinner crypto options
ARM: tegra: Enable Tegra VDE driver in tegra_defconfig
ARM: imx_v6_v7_defconfig: Enable CONFIG_TOUCHSCREEN_DA9052
arm64: defconfig: Enable configs for S32V234
arm64: defconfig: Enable CONFIG_KEYBOARD_IMX_SC_KEY as module
arm64: defconfig: Enable SMMU v3 PMCG
arm64: defconfig: Enable HiSilicon ZIP controller
arm64: defconfig: enable Altera GPIO controller
ARM: multi_v7_defconfig: Enable audio support for stm32mp157
arm64: defconfig: enable rsu driver
...
The recently introduced Energy Model (EM) framework manages power cost
tables for the CPUs of the system. Its only user right now is the
scheduler, in the context of Energy Aware Scheduling (EAS).
However, the EM framework also offers a generic infrastructure that
could replace subsystem-specific implementations of the same concepts,
as this is the case in the thermal framework.
So, in order to prepare the migration of the thermal subsystem to use
the EM framework, enable it in the default arm64 defconfig, which is the
most commonly used architecture for IPA. This will also compile-in all
of the EAS code, although it won't be enabled by default -- EAS requires
to use the 'schedutil' CPUFreq governor while arm64 defaults to
'performance'.
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Quentin Perret <qperret@google.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20191030151451.7961-2-qperret@google.com
- Enable i.MX7ULP watchdog, DA9052 touch and USB configfs support
in imx_v6_v7_defconfig.
- Enable newly added S32V234 SoC and its UART driver support in arm64
defconfig.
- Built i.MX8QXP SCU key driver as module in arm64 defconfig.
- Change AT803X Ethernet PHY driver from module to built-in, so that
we can boot i.MX8MM EVK board with rootfs on NFS.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJdwYuhAAoJEFBXWFqHsHzO+tcH/RmEkt5uueRqM++I56F7Kmc9
80I2pMUbCXln2rjWXEP29OE1h4pKtimfwtEoQvtRX8DOhCFT+CCxsj9JqMZAEnxp
WrCC6GbNAYG+Geje6HAVy7mr2mFD4KXwcc/TLjV2fk3MpuEcsYLuEL/t+wqnKw/W
IabyG0v/CZfp1fkX5FIkpmI770WzOs5kzfIGTnJ9GEJtj/omZYPXK605GSDSWovJ
XX2iI2wFmLy8/KO9enhGQjSzZQyOZce/cyqCG4YGdWSHQzJE9zBP207EHZqEB21b
g+5VzYbM75WmAt0TL+2K3ZzuOKVKZeDpY6KQTz02rTfIRZ4sieY6l9+i/ECtAgY=
=w4CK
-----END PGP SIGNATURE-----
Merge tag 'imx-defconfig-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/defconfig
i.MX defconfig update for 5.5:
- Enable i.MX7ULP watchdog, DA9052 touch and USB configfs support
in imx_v6_v7_defconfig.
- Enable newly added S32V234 SoC and its UART driver support in arm64
defconfig.
- Built i.MX8QXP SCU key driver as module in arm64 defconfig.
- Change AT803X Ethernet PHY driver from module to built-in, so that
we can boot i.MX8MM EVK board with rootfs on NFS.
* tag 'imx-defconfig-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: defconfig: Change CONFIG_AT803X_PHY from m to y
ARM: imx_v6_v7_defconfig: Enable CONFIG_TOUCHSCREEN_DA9052
arm64: defconfig: Enable configs for S32V234
arm64: defconfig: Enable CONFIG_KEYBOARD_IMX_SC_KEY as module
ARM: imx_v6_v7_defconfig: Build USB_CONFIGFS into kernel
ARM: imx_v6_v7_defconfig: Enable CONFIG_IMX7ULP_WDT by default
Link: https://lore.kernel.org/r/20191105150315.15477-7-shawnguo@kernel.org
Signed-off-by: Olof Johansson <olof@lixom.net>
With phy-reset-gpios are enabled for i.MX8MM-EVK board, phy
will be reset. Without CONFIG_AT803X_PHY as y, board will stop
booting in NFS DHCP, because phy is not ready. So mark
CONFIG_AT803X_PHY from m to y to make board boot when using nfs rootfs.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
- Enable support for the new R-Car M3-W+ (r8a77961) SoC.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCXbxC8QAKCRCKwlD9ZEnx
cEbwAP0QFuUSw6DqGAW7KAXw9hw9wyflLV980BiAhLithcUc+gD9FfWapC+c4Bga
1uiVND6X3kqUxHUcbc27P7xvziOYPgQ=
=CPFd
-----END PGP SIGNATURE-----
Merge tag 'renesas-arm64-defconfig-for-v5.5-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/defconfig
Renesas ARM64 defconfig updates for v5.5 (take two)
- Enable support for the new R-Car M3-W+ (r8a77961) SoC.
* tag 'renesas-arm64-defconfig-for-v5.5-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
arm64: defconfig: Enable R8A77961 SoC
Link: https://lore.kernel.org/r/20191101155842.31467-4-geert+renesas@glider.be
Signed-off-by: Olof Johansson <olof@lixom.net>
- enable ARM SMMUv3 PMU and hisi ZIP controller as module for
Kunpeng920 SoC
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=h4j2
-----END PGP SIGNATURE-----
Merge tag 'hisi-arm64-defconfig-for-5.5' of git://github.com/hisilicon/linux-hisi into arm/defconfig
ARM64: hisilicon: defconfig updates for 5.5
- enable ARM SMMUv3 PMU and hisi ZIP controller as module for
Kunpeng920 SoC
* tag 'hisi-arm64-defconfig-for-5.5' of git://github.com/hisilicon/linux-hisi:
arm64: defconfig: Enable SMMU v3 PMCG
arm64: defconfig: Enable HiSilicon ZIP controller
Link: https://lore.kernel.org/r/5DB95B1E.8060607@hisilicon.com
Signed-off-by: Olof Johansson <olof@lixom.net>
- Add SPI_CADENCE_QUADSPI to support the Cadence QSPI driver
- Add INTEL_STRATIX10_RSU as a module to support the Remote Service
Update driver on Stratix10 and Agilex platforms
- Add GPIO_ALTERA as a module to support the Altera GPIO driver
-----BEGIN PGP SIGNATURE-----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=mZHb
-----END PGP SIGNATURE-----
Merge tag 'arm64_defconfig_for_v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into arm/defconfig
arm64 defconfig for v5.5
- Add SPI_CADENCE_QUADSPI to support the Cadence QSPI driver
- Add INTEL_STRATIX10_RSU as a module to support the Remote Service
Update driver on Stratix10 and Agilex platforms
- Add GPIO_ALTERA as a module to support the Altera GPIO driver
* tag 'arm64_defconfig_for_v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
arm64: defconfig: enable Altera GPIO controller
arm64: defconfig: enable rsu driver
arm64: defconfig: enable the Cadence QSPI controller
Link: https://lore.kernel.org/r/20191029143737.24850-2-dinguyen@kernel.org
Signed-off-by: Olof Johansson <olof@lixom.net>
This patch adds the new allwinner crypto configs to ARM64 defconfig
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Select CONFIG_KEYBOARD_IMX_SC_KEY as module by default to
support i.MX8QXP scu key driver.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
HiSilicon Kunpeng920 SoC's SMMU has Performance Monitor Counter Groups(PMCG).
This patch enables related driver in defconfig.
Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Enable CONFIG_CRYPTO_DEV_HISI_ZIP for HiSilicon ZIP controller in Kunpeng920
SoC.
Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Enable Intel Stratix10 Remote System Update (RSU) driver
The Intel Remote System Update (RSU) driver provides a way for customers
to update the boot configuration of a Intel Stratix 10 SoC device with
significantly reduced risk of corrupting the bitstream storage and
bricking the system.
Signed-off-by: Richard Gong <richard.gong@intel.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
- Enable support for the new RZ/G2N (r8a774b1) SoC.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCXal+LwAKCRCKwlD9ZEnx
cBOWAQCxnwQPhFyyuJDpNQMg7P3/mPXoX7Pis5B4VGaAtNFaJQD/WhsTJJ/SPtZQ
IfadPuQOobigRXq69TVpuV/4UYq+aQ4=
=XV8+
-----END PGP SIGNATURE-----
Merge tag 'renesas-arm64-defconfig-for-v5.5-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/defconfig
Renesas ARM64 defconfig updates for v5.5
- Enable support for the new RZ/G2N (r8a774b1) SoC.
* tag 'renesas-arm64-defconfig-for-v5.5-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
arm64: defconfig: Enable R8A774B1 SoC
Link: https://lore.kernel.org/r/20191018101136.26350-3-geert+renesas@glider.be
Signed-off-by: Olof Johansson <olof@lixom.net>
Since there are enough consumers (drivers) for Actions Semi platform in
mainline, let's enable it in ARM64 defconfig. As of now, this platform
can boot a distro from eMMC/uSD.
Link: https://lore.kernel.org/r/20191015152204.5610-1-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
Commit 6334150e9a ("remoteproc: don't allow modular build")
changes CONFIG_REMOTEPROC to a boolean from a tristate config
option which inhibits all defconfigs marking CONFIG_REMOTEPROC as
a module in compiling the remoteproc and dependent config options.
So fix the configs to have CONFIG_REMOTEPROC built in.
Link: https://lore.kernel.org/r/20190920075946.13282-5-j-keerthy@ti.com
Fixes: 6334150e9a ("remoteproc: don't allow modular build")
Signed-off-by: Keerthy <j-keerthy@ti.com>
Acked-by: Will Deacon <will@kernel.org>
[olof: Fixed up all 4 occurrances in this one commit]
Signed-off-by: Olof Johansson <olof@lixom.net>
Tested on the Lenovo Yoga C630 where this patch enables USB.
Without it USB devices are not enumerated.
Link: https://lore.kernel.org/r/20190903192625.14775-3-lee.jones@linaro.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Tested on the Lenovo Yoga C630 where this patch enables the
framebuffer (screen/monitor). Without it the device appears
not to boot.
Link: https://lore.kernel.org/r/20190903192625.14775-2-lee.jones@linaro.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Tested on the Lenovo Yoga C630 where this patch enables the
keyboard, touchpad and touchscreen.
Link: https://lore.kernel.org/r/20190903192625.14775-1-lee.jones@linaro.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
for 5.4, please pull the following:
- Nicolas enables the Raspberry Pi CPUFREQ driver in the ARM64 defconfig file
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEm+Rq3+YGJdiR9yuFh9CWnEQHBwQFAl1a3SIACgkQh9CWnEQH
BwTwrA/+M9DVfCkNFWBQi6ih68sfE//oH9JW5C7xtKfRrVgBR7/DjadIIZr0to8+
Hkx2Xu6wEQ5jaVrFQrHFMEKMOQFpwaLTt0jCcsWVIj0KFHJ6nII5yd+0RXkr+YUh
gUpBuwAov4dOdyTevfVEF/DR7hpnjY/0MrXIXlCSFqNhFlhwDzJCqIoDtnETrysh
Pa6kJnXsqU/qvpFeUcQQR6CBkeVrrfAgg/iIjmccWKzcV62EhSNcBQeHOqzp81m+
7SByAO7Yh6zlSgkNH+Z0rOj+wWGV30uMrjb98ZhmdOBceR1czrxWJ+P6c7BYxAgl
WDNR/ifxLya0ueV2Q1GyiFGJFFz8r8DpJY73prRsOD+rm0+eQxBhS0tKqMKEV07L
64NK3xFvg4aSD9FA+27PM70bV/Qzs+in4bJTQdAwSOsp32Miu6MRKlTX7oAkwSS6
xBhBGrGJmjT/LBKusJXXHnyUbaKR3BMGI3IGCle1Y3WN/djfMtKMvh8N1FU9Xf4H
MwkiaSYWbRzCXN75OiTVvtpF5JhBUl3AVZfEw1D3H5xlnVTjl10zgFufVaU7vYlo
ZC1DmVhAzY41Az4MTWNEUo+w2eaNWf4VRdBPtqFW4RPZurVJRjwK9BNWlUL08ZVP
ciP0FdYl/rT2ZSYsGkdRls7YRJaMJnec/YhUlDW22mO+gi4uwZc=
=brp0
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-5.4/defconfig-arm64' of https://github.com/Broadcom/stblinux into arm/defconfig
This pull request contains Broadcom ARM64-based SoCs defconfig updates
for 5.4, please pull the following:
- Nicolas enables the Raspberry Pi CPUFREQ driver in the ARM64 defconfig file
* tag 'arm-soc/for-5.4/defconfig-arm64' of https://github.com/Broadcom/stblinux:
arm64: defconfig: enable cpufreq support for RPi3
- Enable pinctrl and clock driver support for i.MX8MN SoC.
- Enable SDMA support for i.MX8MQ and i.MX8MM SoC, including
FW_LOADER_USER_HELPER and FW_LOADER_USER_HELPER_FALLBACK to support
SDMA firmware loading via udev.
- Enable module build of i.MX8 DDR PMU driver and ETNAVIV GPU driver.
- Enable module build of OV5645 camera driver in imx_v6_v7_defconfig.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJdYqWeAAoJEFBXWFqHsHzO8h8H+wTFJx+q4CF7Z8l+3OCR5rNQ
RSC3gaiYLhQUCEx+HVnvzDvhovdJNyoHiT6qdYqHIO5BYMmacsuWYwuZveaSePCl
WYZ0XkIuvMDZu4KFkl3ufEZx73u/7hbY1s4PevWm7KDeHY28XyWfflX0aW2yM/2Q
1Q/bNjMnsFGJPItBModiwS9lNjxMl7K9XBU47m0K/sJV4LFxbl+2OmfmaQYn4Ook
PAa4XbRH3d/Ff+jXrbwSy+AZZfpsiwDPV6cEwaAOTGr0O6+jKGRzqyAYNTANwjfU
ihUhy/XBjX2GRmGVxqTthDgktoSfX9eVQFU4WfDiHjRYO3y6vpBccC1ixpawUEM=
=iYpD
-----END PGP SIGNATURE-----
Merge tag 'imx-defconfig-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/defconfig
i.MX defconfig update for 5.4:
- Enable pinctrl and clock driver support for i.MX8MN SoC.
- Enable SDMA support for i.MX8MQ and i.MX8MM SoC, including
FW_LOADER_USER_HELPER and FW_LOADER_USER_HELPER_FALLBACK to support
SDMA firmware loading via udev.
- Enable module build of i.MX8 DDR PMU driver and ETNAVIV GPU driver.
- Enable module build of OV5645 camera driver in imx_v6_v7_defconfig.
* tag 'imx-defconfig-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: defconfig: CONFIG_DRM_ETNAVIV=m
ARM: imx_v6_v7_defconfig: Select the OV5645 camera driver
arm64: defconfig: Build imx8 ddr pmu as module
arm64: defconfig: Select CONFIG_CLK_IMX8MN by default
arm64: defconfig: Select CONFIG_PINCTRL_IMX8MN by default
arm64: defconfig: Enable SDMA on i.mx8mq/8mm
Link: https://lore.kernel.org/r/20190825153237.28829-7-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Two patches to enable the IR receiver and the SPDIF transceiver found on
the Allwinner SoCs.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCXV/4nQAKCRDj7w1vZxhR
xdi9AQC1om2jja54gplSpDKxYzPsAphLlmSNzKKQ5+mzjj1J3gD/VNdkUyw/V2Pk
g/DAuPRgpZWS1ab82Lr08z6RDeFynwk=
=R83T
-----END PGP SIGNATURE-----
Merge tag 'sunxi-config64-for-5.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/defconfig
Allwinner arm64 defconfig changes for 5.4
Two patches to enable the IR receiver and the SPDIF transceiver found on
the Allwinner SoCs.
* tag 'sunxi-config64-for-5.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm64: defconfig: Enable Sun4i SPDIF module
arm64: defconfig: Enable IR SUNXI option
Link: https://lore.kernel.org/r/24f215ca-f3a8-4497-bf98-9ba1808b37be.lettre@localhost
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
QCOM_A53PLL and QCOM_CLK_APCS_MSM8916 used to be enabled by default in
drivers/clk/qcom/Kconfig. A recent patch changed that by dropping the
'default ARCH_QCOM' directive.
Add the two options explicitly in the arm64 defconfig, to avoid
functional regressions.
Acked-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Marc Gonzalez <marc.w.gonzalez@free.fr>
[bjorn: Rewrote subject]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Now that CONFIG_DRM_MSM is no longer default 'y' add it as a module to all
ARCH_QCOM enabled defconfigs to restore the previous expected build
behavior.
I split this off from the original patch to separate out the ARM64 portions.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <agross@kernel.org>
Enable GCC config CONFIG_SM_GCC_8150 and pinctrl config
CONFIG_PINCTRL_SM8150 to make it possible to boot the SM8150 MTP.
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Enable the ACPI_APEI_PCIEAER configuration to support PCIe AER error report
for the Hisilicon D06 board and the dependencies PCIEAER and ACPI_APEI have
been enabled in the default config.
Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Enable the PSCI CPUidle driver to replace the functionality
previously provided by the generic ARM CPUidle driver through
CPU operations.
Link: https://lore.kernel.org/r/20190814125239.6270-2-lorenzo.pieralisi@arm.com
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Allwinner A64 and H6 use the Sun4i SPDIF driver.
Enable this to allow a proper support.
Signed-off-by: Clément Péron <peron.clem@gmail.com>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
For imx8 we want to enable etnaviv, let's enable it
in defconfig, it will be useful to have it enabled for KernelCI
boot and runtime testing.
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Enable CONFIG_IR_SUNXI option for ARM64, so that Allwinner A64/H6 SoCs
can use their IR receiver controller.
Signed-off-by: Clément Péron <peron.clem@gmail.com>
Acked-by: Sean Young <sean@mess.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
This enables both the new firmware clock driver and cpufreq driver
available for the RPi3 family of boards.
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Acked-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
This is available on all imx8 but is not "boot critical" in any way so
build as a module.
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Acked-by: Frank Li <frank.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
