The KSZ8795 PHY ID is in fact used by KSZ8794/KSZ8795/KSZ8765 switches.
Update the PHY ID and name to reflect that, as this family of switches
is commonly refered to as KSZ87xx
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: David S. Miller <davem@davemloft.net>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: George McCollister <george.mccollister@gmail.com>
Cc: Heiner Kallweit <hkallweit1@gmail.com>
Cc: Sean Nyekjaer <sean.nyekjaer@prevas.dk>
Cc: Tristram Ha <Tristram.Ha@microchip.com>
Cc: Woojung Huh <woojung.huh@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The KSZ8051 PHY and the KSZ8794/KSZ8795/KSZ8765 switch share exactly the
same PHY ID. Since KSZ8051 is higher in the ksphy_driver[] list of PHYs
in the micrel PHY driver, it is used even with the KSZ87xx switch. This
is wrong, since the KSZ8051 configures registers of the PHY which are
not present on the simplified KSZ87xx switch PHYs and misconfigures
other registers of the KSZ87xx switch PHYs.
Fortunatelly, it is possible to tell apart the KSZ8051 PHY from the
KSZ87xx switch by checking the Basic Status register Bit 0, which is
read-only and indicates presence of the Extended Capability Registers.
The KSZ8051 PHY has those registers while the KSZ87xx switch does not.
This patch implements simple check for the presence of this bit for
both the KSZ8051 PHY and KSZ87xx switch, to let both use the correct
PHY driver instance.
Fixes: 9d162ed69f ("net: phy: micrel: add support for KSZ8795")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: David S. Miller <davem@davemloft.net>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: George McCollister <george.mccollister@gmail.com>
Cc: Heiner Kallweit <hkallweit1@gmail.com>
Cc: Sean Nyekjaer <sean.nyekjaer@prevas.dk>
Cc: Tristram Ha <Tristram.Ha@microchip.com>
Cc: Woojung Huh <woojung.huh@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If ctx->cached_sq_head < nxt_sq_head, we should add UINT_MAX to tmp, not
tmp_nxt.
Fixes: 5da0fb1ab3 ("io_uring: consider the overflow of sequence for timeout req")
Signed-off-by: yangerkun <yangerkun@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We've got two issues with the non-regular file handling for non-blocking
IO:
1) We don't want to re-do a short read in full for a non-regular file,
as we can't just read the data again.
2) For non-regular files that don't support non-blocking IO attempts,
we need to punt to async context even if the file is opened as
non-blocking. Otherwise the caller always gets -EAGAIN.
Add two new request flags to handle these cases. One is just a cache
of the inode S_ISREG() status, the other tells io_uring that we always
need to punt this request to async context, even if REQ_F_NOWAIT is set.
Cc: stable@vger.kernel.org
Reported-by: Hrvoje Zeba <zeba.hrvoje@gmail.com>
Tested-by: Hrvoje Zeba <zeba.hrvoje@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
- Fix a timestamp signedness problem in the new bulkstat ioctl.
-----BEGIN PGP SIGNATURE-----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=WVUx
-----END PGP SIGNATURE-----
Merge tag 'xfs-5.4-fixes-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs fix from Darrick Wong:
"The single fix converts the seconds field in the recently added XFS
bulkstat structure to a signed 64-bit quantity.
The structure layout doesn't change and so far there are no users of
the ioctl to break because we only publish xfs ioctl interfaces
through the XFS userspace development libraries, and we're still
working on a 5.3 release"
* tag 'xfs-5.4-fixes-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: change the seconds fields in xfs_bulkstat to signed
dma-resv:
- shared fences for lima/panfrost
ttm:
- prefault regression fix
- lifetime fix
panfrost:
- stopped job timeout fix
- missing register values
amdgpu:
- smu7 powerplay fix
- bail earlier for cik/si detection
- navi SDMA fix
radeon:
- revert a ppc64 shutdown fix that broke x86
i915:
- VBT information handling fix
- Circular locking fix
- preemption vs resubmission virtual requests fix
-----BEGIN PGP SIGNATURE-----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=HZDK
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-2019-10-18' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"This is this weeks fixes for drm.
The dma-resv one is probably the more important one a fair few people
have reported it, besides that it's a couple of panfrost, a few i915
and a few amdgpu fixes.
One radeon patch to fix some ppc64 related issues caused an x86
regression so is getting reverted for now.
Summary:
dma-resv:
- shared fences for lima/panfrost
ttm:
- prefault regression fix
- lifetime fix
panfrost:
- stopped job timeout fix
- missing register values
amdgpu:
- smu7 powerplay fix
- bail earlier for cik/si detection
- navi SDMA fix
radeon:
- revert a ppc64 shutdown fix that broke x86
i915:
- VBT information handling fix
- Circular locking fix
- preemption vs resubmission virtual requests fix"
* tag 'drm-fixes-2019-10-18' of git://anongit.freedesktop.org/drm/drm:
drm/i915: Fixup preempt-to-busy vs resubmission of a virtual request
drm/i915/userptr: Never allow userptr into the mappable GGTT
drm/i915: Favor last VBT child device with conflicting AUX ch/DDC pin
drm/i915/execlists: Refactor -EIO markup of hung requests
drm/panfrost: Handle resetting on timeout better
drm/panfrost: Add missing GPU feature registers
drm/ttm: fix handling in ttm_bo_add_mem_to_lru
drm/ttm: Restore ttm prefaulting
drm/ttm: fix busy reference in ttm_mem_evict_first
drm/amdgpu/sdma5: fix mask value of POLL_REGMEM packet for pipe sync
drm/amdgpu: Bail earlier when amdgpu.cik_/si_support is not set to 1
Revert "drm/radeon: Fix EEH during kexec"
drm/msm/dsi: Implement reset correctly
dma-buf/resv: fix exclusive fence get
drm/edid: Add 6 bpc quirk for SDC panel in Lenovo G50
drm/tiny: Kconfig: Remove always-y THERMAL dep. from TINYDRM_REPAPER
drm/amdgpu/powerplay: fix typo in mvdd table setup
Workaround for Cavium/Marvell ThunderX2 erratum #219.
* errata/tx2-219:
arm64: Allow CAVIUM_TX2_ERRATUM_219 to be selected
arm64: Avoid Cavium TX2 erratum 219 when switching TTBR
arm64: Enable workaround for Cavium TX2 erratum 219 when running SMT
arm64: KVM: Trap VM ops when ARM64_WORKAROUND_CAVIUM_TX2_219_TVM is set
-ttm: A couple fixes related to lifetime and restore prefault behavior
(Christian & Thomas)
-panfrost: Fill in missing feature reg values and fix stoppedjob timeouts
(Steven)
Cc: Qiang Yu <yuq825@gmail.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Steven Price <steven.price@arm.com>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEHF6rntfJ3enn8gh8cywAJXLcr3kFAl2oz+4ACgkQcywAJXLc
r3msRAf+OoZdW8VQiDAFlussSOTix7cj5zf2rl41vz/JxgW1BpqBw1QZJfmNERE0
CfO4iRohu/KH7WOby/MJdfoE5uGnwfrOlyBSmZ21vep982Vakj32MSnDF1+SUHxr
+X6afxnLvcMh9Mue3doYTXP40Pu4evzd3lIWmVbNyf17hfWS/zl5ciOCR/AZwNxB
j4VwV2qoTXCidOaQHXZaEBm96bYNh9HQOXTnNQTDQHg5XpEiVFHHZzt7gQJlZ5ce
DJ//To5At0lFLlxDxUnrChtLcL0CFRRuN7k6DQDfRTAc+QF+qGtYtk5wVmWttl44
5vcb7PiSqvmhpsj8AGAnwbykjg8lHQ==
=Di3+
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-fixes-2019-10-17' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
-dma-resv: Change shared_count to post-increment to fix lima crash (Qiang)
-ttm: A couple fixes related to lifetime and restore prefault behavior
(Christian & Thomas)
-panfrost: Fill in missing feature reg values and fix stoppedjob timeouts
(Steven)
Cc: Qiang Yu <yuq825@gmail.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Steven Price <steven.price@arm.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Sean Paul <sean@poorly.run>
Link: https://patchwork.freedesktop.org/patch/msgid/20191017203419.GA142909@art_vandelay
drm-fixes-5.4-2019-10-16:
amdgpu:
- Powerplay fix for SMU7 parts
- Bail earlier when cik/si support is not set to 1
- Fix an SDMA issue on navi
radeon:
- revert a PPC fix which broken x86
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191017022443.3853-1-alexander.deucher@amd.com
- Important circular locking fix
- Fix for preemption vs resubmission on virtual requests
- and a prep patch to make this last one to apply cleanly
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJdqHKRAAoJEPpiX2QO6xPKNDAH/01M3WCkeHubU+0bHVH5DE74
0sq4HbVnVAHhReU8wYAMl0v1IndubVrdnxIfieaVDdODZXZCx8bYHuby2rD4bdve
gH8ICA90RWU3ubIfjCvxLtoDn7EyPgIMk+GlLhfW+bjGqNtWFt9Ai4Bbm8nqfkAL
bUBbPFHJVOuZsmNW/XoSHn1zS8hv1r4dlOANt6JGlawbKSAsw+VtlauySKHO0srA
OcvHj9xnZeKsV/1qxZ53sgl3RkjtTWar2KS80JYxtCd8Ru4zEuwFsUC5XCK5mvSE
5xIGjsE5ILSyT6JevVOqc0R9SJylX5mexvClImDeIIIaYtmx33hhWNhg+yR3pDE=
=Uosd
-----END PGP SIGNATURE-----
Merge tag 'drm-intel-fixes-2019-10-17' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
- Display fix on handling VBT information.
- Important circular locking fix
- Fix for preemption vs resubmission on virtual requests
- and a prep patch to make this last one to apply cleanly
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191017135444.GA12255@intel.com
The KSZ driver uses one regmap per register width (8/16/32), each with
it's own lock, but accessing the same set of registers. In theory, it
is possible to create a race condition between these regmaps, although
the underlying bus (SPI or I2C) locking should assure nothing bad will
really happen and the accesses would be correct.
To make the driver do the right thing, add one single shared mutex for
all the regmaps used by the driver instead. This assures that even if
some future hardware is on a bus which does not serialize the accesses
the same way SPI or I2C does, nothing bad will happen.
Note that the status_mutex was unused and only initied, hence it was
renamed and repurposed as the regmap mutex.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: David S. Miller <davem@davemloft.net>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: George McCollister <george.mccollister@gmail.com>
Cc: Tristram Ha <Tristram.Ha@microchip.com>
Cc: Woojung Huh <woojung.huh@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
The KSZ87xx driver calls mutex_init() on mutexes already inited in
ksz_common.c ksz_switch_register(). Do not do it twice, drop the
reinitialization.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: David S. Miller <davem@davemloft.net>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: George McCollister <george.mccollister@gmail.com>
Cc: Tristram Ha <Tristram.Ha@microchip.com>
Cc: Woojung Huh <woojung.huh@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
The stmmac_pcs_ctrl_ane() expects a register address as
argument 1, but for some reason the mac_device_info is
being passed.
Fix the warning (and possible bug) from sparse:
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c:2613:17: warning: incorrect type in argument 1 (different address spaces)
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c:2613:17: expected void [noderef] <asn:2> *ioaddr
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c:2613:17: got struct mac_device_info *hw
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ioana Ciornei says:
====================
dpaa2-eth: misc fixes
This patch set adds a couple of fixes around updating configuration on MAC
change. Depending on when MC connects the DPNI to a MAC, both the MAC
address and TX FQIDs should be updated everytime there is a change in
configuration.
Changes in v2:
- used reverse christmas tree ordering in patch 2/2
Changes in v3:
- add a missing new line
- go back to FQ based enqueueing after a transient error
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Depending on when MC connects the DPNI to a MAC, Tx FQIDs may
not be available during probe time.
Read the FQIDs each time the link goes up to avoid using invalid
values. In case an error occurs or an invalid value is retrieved,
fall back to QDID-based enqueueing.
Fixes: 1fa0f68c92 ("dpaa2-eth: Use FQ-based DPIO enqueue API")
Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add IRQ for the DPNI endpoint change event, resolving the issue
when a dynamically created DPNI gets a randomly generated hw address
when the endpoint is a DPMAC object.
Signed-off-by: Florin Chiculita <florinlaurentiu.chiculita@nxp.com>
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The serial state information must not be embedded into another
data structure, as this interferes with cache handling for DMA
on architectures without cache coherence..
That would result in data corruption on some architectures
Allocating it separately.
v2: fix syntax error
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull input fixes from Dmitry Torokhov:
"The main change is that we are reverting blanket enablement of SMBus
mode for devices with Elan touchpads that report BIOS release date as
2018+ because there are older boxes with updated BIOSes that still do
not work well in SMbus mode.
We will have to establish whitelist for SMBus mode it looks like"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Revert "Input: elantech - enable SMBus on new (2018+) systems"
Input: synaptics-rmi4 - avoid processing unknown IRQs
Input: soc_button_array - partial revert of support for newer surface devices
Input: goodix - add support for 9-bytes reports
Input: da9063 - fix capability and drop KEY_SLEEP
While it is useful for new drivers to use devm_platform_ioremap_resource,
this script is currently used to spam maintainers, often updating very
old drivers. The net benefit is the removal of 2 lines of code in the
driver but the review load for the maintainers is huge. As of now, more
that 560 patches have been sent, some of them obviously broken, as in:
https://lore.kernel.org/lkml/9bbcce19c777583815c92ce3c2ff2586@www.loen.fr/
Remove the script to reduce the spam.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Przemysław Kopa reports that since commit b516ea586d ("PCI: Enable
NVIDIA HDA controllers"), the discrete GPU Nvidia GeForce GT 540M on his
2011 Samsung laptop refuses to runtime suspend, resulting in a power
regression and excessive heat.
Rivera Valdez witnesses the same issue with a GeForce GT 525M (GF108M)
of the same era, as does another Arch Linux user named "R0AR" with a
more recent GeForce GTX 1050 Ti (GP107M).
The commit exposes the discrete GPU's HDA controller and all four codecs
on the controller do not set the CLKSTOP and EPSS bits in the Supported
Power States Response. They also do not set the PS-ClkStopOk bit in the
Get Power State Response. hda_codec_runtime_suspend() therefore does
not call snd_hdac_codec_link_down(), which prevents each codec and the
PCI device from runtime suspending.
The same issue is present on some AMD discrete GPUs and we addressed it
by forcing runtime PM despite the bits not being set, see commit
57cb54e53b ("ALSA: hda - Force to link down at runtime suspend on
ATI/AMD HDMI").
Do the same for Nvidia HDMI codecs.
Fixes: b516ea586d ("PCI: Enable NVIDIA HDA controllers")
Link: https://bbs.archlinux.org/viewtopic.php?pid=1865512
Link: https://bugs.freedesktop.org/show_bug.cgi?id=75985#c81
Reported-by: Przemysław Kopa <prymoo@gmail.com>
Reported-by: Rivera Valdez <riveravaldez@ysinembargo.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Cc: Daniel Drake <dan@reactivated.net>
Cc: stable@vger.kernel.org # v5.3+
Link: https://lore.kernel.org/r/3086bc75135c1e3567c5bc4f3cc4ff5cbf7a56c2.1571324194.git.lukas@wunner.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Users of Intel P-Unit IPC driver might be surprised by harmless warning.
Thus, switch to API which doesn't issue a warning at all.
I²C multi-instantiate driver continues to add slave devices even when IRQ
resource is not found. For devices in the market IRQ resource is mandatory,
so, fail the ->probe() of the parent driver to avoid slaves being probed.
Avoid compiler warning due to unused variable in Classmate laptop driver.
The following is an automated git shortlog grouped by driver:
classmate-laptop:
- remove unused variable
i2c-multi-instantiate:
- Fail the probe if no IRQ provided
intel_punit_ipc:
- Avoid error message when retrieving IRQ
-----BEGIN PGP SIGNATURE-----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=dfns
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v5.4-3' of git://git.infradead.org/linux-platform-drivers-x86
Pull x86 platform driver fixes from Andy Shevchenko:
- Users of Intel P-Unit IPC driver might be surprised by harmless
warning. Thus, switch to API which doesn't issue a warning at all.
- I²C multi-instantiate driver continues to add slave devices even when
IRQ resource is not found. For devices in the market IRQ resource is
mandatory, so, fail the ->probe() of the parent driver to avoid
slaves being probed.
- Avoid compiler warning due to unused variable in Classmate laptop
driver.
* tag 'platform-drivers-x86-v5.4-3' of git://git.infradead.org/linux-platform-drivers-x86:
platform/x86: i2c-multi-instantiate: Fail the probe if no IRQ provided
platform/x86: intel_punit_ipc: Avoid error message when retrieving IRQ
platform/x86: classmate-laptop: remove unused variable
GFP_NOWAIT allocation can fail anytime - it doesn't wait for memory being
available and it fails if the mempool is exhausted and there is not enough
memory.
If we go down this path:
map_bio -> mg_start -> alloc_migration -> mempool_alloc(GFP_NOWAIT)
we can see that map_bio() doesn't check the return value of mg_start(),
and the bio is leaked.
If we go down this path:
map_bio -> mg_start -> mg_lock_writes -> alloc_prison_cell ->
dm_bio_prison_alloc_cell_v2 -> mempool_alloc(GFP_NOWAIT) ->
mg_lock_writes -> mg_complete
the bio is ended with an error - it is unacceptable because it could
cause filesystem corruption if the machine ran out of memory
temporarily.
Change GFP_NOWAIT to GFP_NOIO, so that the mempool code will properly
wait until memory becomes available. mempool_alloc with GFP_NOIO can't
fail, so remove the code paths that deal with allocation failure.
Cc: stable@vger.kernel.org
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
The fixes pertain to a problem with initializing the Intel GPIO
irqchips when adding gpiochips, Andy fixed it up elegantly by
adding a hardware initialization callback to the struct
gpio_irq_chip so let's use this. Tested and verified on the
target hardware.
-----BEGIN PGP SIGNATURE-----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=tDS5
-----END PGP SIGNATURE-----
Merge tag 'gpio-v5.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO fixes from Linus Walleij:
"The fixes pertain to a problem with initializing the Intel GPIO
irqchips when adding gpiochips.
Andy fixed it up elegantly by adding a hardware initialization
callback to the struct gpio_irq_chip so let's use this. Tested and
verified on the target hardware"
* tag 'gpio-v5.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
gpio: lynxpoint: set default handler to be handle_bad_irq()
gpio: merrifield: Move hardware initialization to callback
gpio: lynxpoint: Move hardware initialization to callback
gpio: intel-mid: Move hardware initialization to callback
gpiolib: Initialize the hardware with a callback
gpio: merrifield: Restore use of irq_base
Both multi_cpu_stop() and set_state() access multi_stop_data::state
racily using plain accesses. These are subject to compiler
transformations which could break the intended behaviour of the code,
and this situation is detected by KCSAN on both arm64 and x86 (splats
below).
Improve matters by using READ_ONCE() and WRITE_ONCE() to ensure that the
compiler cannot elide, replay, or tear loads and stores.
In multi_cpu_stop() the two loads of multi_stop_data::state are expected to
be a consistent value, so snapshot the value into a temporary variable to
ensure this.
The state transitions are serialized by atomic manipulation of
multi_stop_data::num_threads, and other fields in multi_stop_data are not
modified while subject to concurrent reads.
KCSAN splat on arm64:
| BUG: KCSAN: data-race in multi_cpu_stop+0xa8/0x198 and set_state+0x80/0xb0
|
| write to 0xffff00001003bd00 of 4 bytes by task 24 on cpu 3:
| set_state+0x80/0xb0
| multi_cpu_stop+0x16c/0x198
| cpu_stopper_thread+0x170/0x298
| smpboot_thread_fn+0x40c/0x560
| kthread+0x1a8/0x1b0
| ret_from_fork+0x10/0x18
|
| read to 0xffff00001003bd00 of 4 bytes by task 14 on cpu 1:
| multi_cpu_stop+0xa8/0x198
| cpu_stopper_thread+0x170/0x298
| smpboot_thread_fn+0x40c/0x560
| kthread+0x1a8/0x1b0
| ret_from_fork+0x10/0x18
|
| Reported by Kernel Concurrency Sanitizer on:
| CPU: 1 PID: 14 Comm: migration/1 Not tainted 5.3.0-00007-g67ab35a199f4-dirty #3
| Hardware name: linux,dummy-virt (DT)
KCSAN splat on x86:
| write to 0xffffb0bac0013e18 of 4 bytes by task 19 on cpu 2:
| set_state kernel/stop_machine.c:170 [inline]
| ack_state kernel/stop_machine.c:177 [inline]
| multi_cpu_stop+0x1a4/0x220 kernel/stop_machine.c:227
| cpu_stopper_thread+0x19e/0x280 kernel/stop_machine.c:516
| smpboot_thread_fn+0x1a8/0x300 kernel/smpboot.c:165
| kthread+0x1b5/0x200 kernel/kthread.c:255
| ret_from_fork+0x35/0x40 arch/x86/entry/entry_64.S:352
|
| read to 0xffffb0bac0013e18 of 4 bytes by task 44 on cpu 7:
| multi_cpu_stop+0xb4/0x220 kernel/stop_machine.c:213
| cpu_stopper_thread+0x19e/0x280 kernel/stop_machine.c:516
| smpboot_thread_fn+0x1a8/0x300 kernel/smpboot.c:165
| kthread+0x1b5/0x200 kernel/kthread.c:255
| ret_from_fork+0x35/0x40 arch/x86/entry/entry_64.S:352
|
| Reported by Kernel Concurrency Sanitizer on:
| CPU: 7 PID: 44 Comm: migration/7 Not tainted 5.3.0+ #1
| Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Marco Elver <elver@google.com>
Link: https://lkml.kernel.org/r/20191007104536.27276-1-mark.rutland@arm.com
On Asus MJ401TA (with Realtek ALC256), the headset mic is connected to
pin 0x19, with default configuration value 0x411111f0 (indicating no
physical connection).
Enable this by quirking the pin. Mic jack detection was also tested and
found to be working.
This enables use of the headset mic on this product.
Signed-off-by: Daniel Drake <drake@endlessm.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191017081501.17135-1-drake@endlessm.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The option --sort=ORDER was only introduced in tar 1.28 (2014), which
is rather new and might not be available in some setups.
This patch tries to replicate the previous behaviour as closely as
possible to fix the kheaders build for older environments. It does
not produce identical archives compared to the previous version due
to minor sorting differences but produces reproducible results itself
in my tests.
Reported-by: Andreas Schwab <schwab@suse.de>
Signed-off-by: Dmitry Goldin <dgoldin+lkml@protonmail.ch>
Tested-by: Andreas Schwab <schwab@suse.de>
Tested-by: Quentin Perret <qperret@google.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
disable ptp_ref_clk in suspend flow, and enable it in resume flow.
Fixes: f573c0b9c4 ("stmmac: move stmmac_clk, pclk, clk_ptp_ref and stmmac_rst to platform structure")
Signed-off-by: Biao Huang <biao.huang@mediatek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Some drivers just call phy_ethtool_ksettings_set() to set the
links, for those phy drivers that use genphy_read_status(), if
autoneg is on, and the link is up, than execute "ethtool -s
ethx autoneg on" will cause "link partner" information disappear.
The call trace is phy_ethtool_ksettings_set()->phy_start_aneg()
->linkmode_zero(phydev->lp_advertising)->genphy_read_status(),
the link didn't change, so genphy_read_status() just return, and
phydev->lp_advertising is zero now.
This patch moves the clear operation of lp_advertising from
phy_start_aneg() to genphy_read_lpa()/genphy_c45_read_lpa(), and
if autoneg on and autoneg not complete, just clear what the
generic functions care about.
Fixes: 88d6272aca ("net: phy: avoid unneeded MDIO reads in genphy_read_status")
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We need to extend the rcu_read_lock() section in rxrpc_error_report()
and use rcu_dereference_sk_user_data() instead of plain access
to sk->sk_user_data to make sure all rules are respected.
The compiler wont reload sk->sk_user_data at will, and RCU rules
prevent memory beeing freed too soon.
Fixes: f0308fb070 ("rxrpc: Fix possible NULL pointer access in ICMP handling")
Fixes: 17926a7932 ("[AF_RXRPC]: Provide secure RxRPC sockets for use by userspace and kernel both")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
As preempt-to-busy leaves the request on the HW as the resubmission is
processed, that request may complete in the background and even cause a
second virtual request to enter queue. This second virtual request
breaks our "single request in the virtual pipeline" assumptions.
Furthermore, as the virtual request may be completed and retired, we
lose the reference the virtual engine assumes is held. Normally, just
removing the request from the scheduler queue removes it from the
engine, but the virtual engine keeps track of its singleton request via
its ve->request. This pointer needs protecting with a reference.
v2: Drop unnecessary motion of rq->engine = owner
Fixes: 22b7a426bb ("drm/i915/execlists: Preempt-to-busy")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190923152844.8914-1-chris@chris-wilson.co.uk
(cherry picked from commit b647c7df01)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The first come first served apporoach to handling the VBT
child device AUX ch conflicts has backfired. We have machines
in the wild where the VBT specifies both port A eDP and
port E DP (in that order) with port E being the real one.
So let's try to flip the preference around and let the last
child device win once again.
Cc: stable@vger.kernel.org
Cc: Jani Nikula <jani.nikula@intel.com>
Tested-by: Masami Ichikawa <masami256@gmail.com>
Tested-by: Torsten <freedesktop201910@liggy.de>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111966
Fixes: 36a0f92020 ("drm/i915/bios: make child device order the priority order")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191011202030.8829-1-ville.syrjala@linux.intel.com
Acked-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit 41e35ffb38)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Pull setting -EIO on the hung requests into its own utility function.
Having allowed ourselves to short-circuit submission of completed
requests, we can now do the mark_eio() prior to submission and avoid
some redundant operations.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190923110056.15176-4-chris@chris-wilson.co.uk
(cherry picked from commit 0d7cf7bc15)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
This reverts commit b0818f80c8.
Started seeing weird behavior after this patch especially in
the IPv6 code path. Haven't root caused it, but since this was
applied to net branch, taking a precautionary measure to revert
it and look / analyze those failures
Revert this now and I'll send a better fix after analysing / fixing
the weirdness observed.
CC: Eric Dumazet <edumazet@google.com>
CC: Wei Wang <weiwan@google.com>
CC: David S. Miller <davem@davemloft.net>
Signed-off-by: Mahesh Bandewar <maheshb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sign-extending TTBR1 addresses when converting to an untagged address
breaks the documented POSIX semantics for mlock() in some obscure error
cases where we end up returning -EINVAL instead of -ENOMEM as a direct
result of rewriting the upper address bits.
Rework the untagged_addr() macro to preserve the upper address bits for
TTBR1 addresses and only clear the tag bits for user addresses. This
matches the behaviour of the 'clear_address_tag' assembly macro, so
rename that and align the implementations at the same time so that they
use the same instruction sequences for the tag manipulation.
Link: https://lore.kernel.org/stable/20191014162651.GF19200@arrakis.emea.arm.com/
Reported-by: Jan Stancek <jstancek@redhat.com>
Tested-by: Jan Stancek <jstancek@redhat.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Tested-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Reviewed-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Will Deacon <will@kernel.org>
When detecting a spurious EL1 translation fault, we have the CPU retry
the translation using an AT S1E1R instruction, and inspect PAR_EL1 to
determine if the fault was spurious.
When PAR_EL1.F == 0, the AT instruction successfully translated the
address without a fault, which implies the original fault was spurious.
However, in this case we return false and treat the original fault as if
it was not spurious.
Invert the return value so that we treat such a case as spurious.
Cc: Catalin Marinas <catalin.marinas@arm.com>
Fixes: 42f91093b0 ("arm64: mm: Ignore spurious translation faults taken from the kernel")
Tested-by: James Morse <james.morse@arm.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
The 'F' field of the PAR_EL1 register lives in bit 0, not bit 1.
Fix the broken definition in 'sysreg.h'.
Fixes: e8620cff99 ("arm64: sysreg: Add some field definitions for PAR_EL1")
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Will Deacon <will@kernel.org>
Preempting from IRQ-return means that the task has its PSTATE saved
on the stack, which will get restored when the task is resumed and does
the actual IRQ return.
However, enabling some CPU features requires modifying the PSTATE. This
means that, if a task was scheduled out during an IRQ-return before all
CPU features are enabled, the task might restore a PSTATE that does not
include the feature enablement changes once scheduled back in.
* Task 1:
PAN == 0 ---| |---------------
| |<- return from IRQ, PSTATE.PAN = 0
| <- IRQ |
+--------+ <- preempt() +--
^
|
reschedule Task 1, PSTATE.PAN == 1
* Init:
--------------------+------------------------
^
|
enable_cpu_features
set PSTATE.PAN on all CPUs
Worse than this, since PSTATE is untouched when task switching is done,
a task missing the new bits in PSTATE might affect another task, if both
do direct calls to schedule() (outside of IRQ/exception contexts).
Fix this by preventing preemption on IRQ-return until features are
enabled on all CPUs.
This way the only PSTATE values that are saved on the stack are from
synchronous exceptions. These are expected to be fatal this early, the
exception is BRK for WARN_ON(), but as this uses do_debug_exception()
which keeps IRQs masked, it shouldn't call schedule().
Signed-off-by: Julien Thierry <julien.thierry@arm.com>
[james: Replaced a really cool hack, with an even simpler static key in C.
expanded commit message with Julien's cover-letter ascii art]
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
The message should match the parameter, i.e. raid0.default_layout.
Fixes: c84a1372df ("md/raid0: avoid RAID0 data corruption due to layout confusion.")
Cc: NeilBrown <neilb@suse.de>
Reported-by: Ivan Topolsky <doktor.yak@gmail.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
The __kthread_queue_delayed_work is not exported so
make it static, to avoid the following sparse warning:
kernel/kthread.c:869:6: warning: symbol '__kthread_queue_delayed_work' was not declared. Should it be static?
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
On a machine with a 64K PAGE_SIZE, the nested for loops in
test_check_nonzero_user() can lead to soft lockups, eg:
watchdog: BUG: soft lockup - CPU#4 stuck for 22s! [modprobe:611]
Modules linked in: test_user_copy(+) vmx_crypto gf128mul crc32c_vpmsum virtio_balloon ip_tables x_tables autofs4
CPU: 4 PID: 611 Comm: modprobe Tainted: G L 5.4.0-rc1-gcc-8.2.0-00001-gf5a1a536fa14-dirty #1151
...
NIP __might_sleep+0x20/0xc0
LR __might_fault+0x40/0x60
Call Trace:
check_zeroed_user+0x12c/0x200
test_user_copy_init+0x67c/0x1210 [test_user_copy]
do_one_initcall+0x60/0x340
do_init_module+0x7c/0x2f0
load_module+0x2d94/0x30e0
__do_sys_finit_module+0xc8/0x150
system_call+0x5c/0x68
Even with a 4K PAGE_SIZE the test takes multiple seconds. Instead
tweak it to only scan a 1024 byte region, but make it cross the
page boundary.
Fixes: f5a1a536fa ("lib: introduce copy_struct_from_user() helper")
Suggested-by: Aleksa Sarai <cyphar@cyphar.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Aleksa Sarai <cyphar@cyphar.com>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Link: https://lore.kernel.org/r/20191016122732.13467-1-mpe@ellerman.id.au
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
If there are neither processor objects nor processor device objects
in the ACPI tables, the per-CPU processors table will not be
initialized and attempting to dereference pointers from there will
cause the kernel to crash. This happens in acpi_processor_ppc_init()
and acpi_thermal_cpufreq_init() after commit d15ce41273 ("ACPI:
cpufreq: Switch to QoS requests instead of cpufreq notifier")
which didn't add the requisite NULL pointer checks in there.
Add the NULL pointer checks to acpi_processor_ppc_init() and
acpi_thermal_cpufreq_init(), and to the corresponding "exit"
routines.
While at it, drop redundant return instructions from
acpi_processor_ppc_init() and acpi_thermal_cpufreq_init().
Fixes: d15ce41273 ("ACPI: cpufreq: Switch to QoS requests instead of cpufreq notifier")
Reported-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
change_bit implementation for XCHAL_HAVE_EXCLUSIVE case changes all bits
except the one required due to copy-paste error from clear_bit.
Cc: stable@vger.kernel.org # v5.2+
Fixes: f7c34874f0 ("xtensa: add exclusive atomics support")
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
This patch fixes the virtual address layout in pgtable.h. The virtual
address of FIXADDR_START and VMEMMAP_START should not be overlapped.
Fixes: d95f1a542c ("RISC-V: Implement sparsemem")
Signed-off-by: Greentime Hu <greentime.hu@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
[paul.walmsley@sifive.com: fixed patch description]
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Make sure res does not contain random value if the call to
sr_read_cmd fails for some reason.
Reported-by: syzbot+f1842130bbcfb335bac1@syzkaller.appspotmail.com
Signed-off-by: Valentin Vidic <vvidic@valentin-vidic.from.hr>
Signed-off-by: David S. Miller <davem@davemloft.net>
The RGMII_MODE_EN bit value was 0 for GENET versions 1 through 3, and
became 6 for GENET v4 and above, account for that difference.
Fixes: aa09677cba ("net: bcmgenet: add MDIO routines")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Doug Berger <opendmb@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The tc_flow_parsers is not used outside of the driver, so
make it static to avoid the following sparse warning:
drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c:516:3: warning: symbol 'tc_flow_parsers' was not declared. Should it be static?
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
The cpdma_chan_split_pool() function is not used outside of
the driver, so make it static to avoid the following sparse
warning:
drivers/net/ethernet/ti/davinci_cpdma.c:725:5: warning: symbol 'cpdma_chan_split_pool' was not declared. Should it be static?
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>