skl_get_buf_trans_edp() effectively contains another copy of
skl_get_buf_trans_dp(). Remove the duplication and just call
skl_get_buf_trans_dp() from skl_get_buf_trans_edp().
v2: Resolve conflicts due to KBL
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> (v1)
skl_get_buf_trans_*() don't need the 'ddi_translations' local variable
since all they with is assign and return. Just return the right thing
directly and get rid of the local variable.
v2: Resolve conflicts due to KBL
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> (v1)
Rather than having open coded checks for the DDI A/E configuration,
just store the max supported lane count in intel_digital_port.
We had an open coded check for DDI A, but not for DDI E. So we may
have been vilating the DDI E max lane count.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
We're supposed to pass the primary DP encoder to intel_ddi_clk_select(),
not the fake MST encoder. Do so.
There's no real bug here though, since intel_ddi_clk_select() only
checks if the encoder type is EDP (which it isn't for either the
primary DP encoder or the fake MST encoder), and it gets the DDI port
via intel_ddi_get_encoder_port() (which knows how to do the
fake->primary->port dance itself).
Fixes: e404ba8 ("drm/i915: Setup DDI clk for MST on SKL")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1449597590-6971-2-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Fixes: 1e4854e96c ("drm/amdgpu/powerplay: implement thermal control for tonga.")
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Dave Airlie <airlied@redhat.com>
The sequence block has sizes of elements after the operation byte since
sequence block v3. Use it to skip elements we don't support yet.
v2: remove redundant exec_elem[operation_byte] check (Daniel)
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1452006408-27688-1-git-send-email-jani.nikula@intel.com
The changes since the sequence block v2 are:
* The whole MIPI bios data block has a separate 32-bit size field since
v3, stored after the version. This facilitates big sequences.
* The size of the panel specific sequence blocks has grown to 32
bits. This facilitates big sequences.
* The elements within sequences now have an 8-bit size field following
the operation byte. This facilitates skipping unknown new operation
bytes, i.e. forward compatibility.
v2 (of the patch): use DRM_ERROR for unknown operation byte
v3 (of the patch): even more bounds checking (Ville)
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1452518102-3154-1-git-send-email-jani.nikula@intel.com
If we go into suspend with unclaimed access detected,
it would be nice to catch that access on a next suspend path.
So instead of just notifying about it, arm the unclaimed
mmio checks on suspend side.
We want to keep the asymmetry on resume, as if it was
on resume path, it was not driver that is responsible so
no point in arming mmio debugs.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1452261080-6979-2-git-send-email-mika.kuoppala@intel.com
With commit 8ac3e1bb76 ("drm/i915: Add non claimed mmio checking
for vlv/chv") we now have chv/vlv support in place for detecting
unclaimed access. Also the perf hit of extra mmio read
is now only suffered if mmio_debug is set.
This allows us to stuff the macro for unclaimed reg
detection inside a generic gen6 register access, as now all
gens using these macros uses also unclaimed debugs, the one
exception being snb. We gain more clean and generic macros
and only downside is that snb will suffer one branch perf hit
without upside.
Note that the hsw write path debug register check now
happens before fifo check, but this should not make
any real difference.
As vlv/chv use the generic gen6 access macros, the consequence
is that they gain the mmio_debug feature.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1452261080-6979-1-git-send-email-mika.kuoppala@intel.com
Document what I've learned so far about the gmux so that we can
collaboratively reverse-engineer its remaining unknown bits
without everyone having to start from scratch.
The DOC sections are bound together in the gpu.tmpl DocBook
under a new vga_switcheroo "Handlers" chapter. Eventually
this should be amended with documentation about the four other
handlers that exist so far (nouveau v1 DSM, nouveau Optimus DSM,
radeon ATPX, amdgpu ATPX).
Requires kernel-doc with asciidoc support.
The EFI variable was reverse-engineered by Bruno Bierbaumer
<bruno@bierbaumer.net> and Andreas Heider <andreas@meetr.de>.
Some of the remaining open questions:
* How are vblank intervals synchronized on retinas to achieve seamless
switching? Is the DP mux capable of this? It's not mentioned in the
data sheets. Or is it done at the OS level, i.e. do we have to
synchronize vblank intervals between DRM drivers? There's a signal
coming from the panel connector and going into gmux, could this be
the vblank signal as received by the panel to properly time the
switch?
* On retinas there's an I2C bus between gmux and the connector of the
right I/O board, apparently leading to the Parade PS8401A HDMI
repeater. What is this for, is it controlled via gmux registers?
Data sheet:
http://www.paradetech.com/products/jitter-cleaning-repeaters/ps8401/
* On retinas there's an I2C bus between gmux and the LED driver.
Pre-retinas connected the LED driver to SMBUS. Are there additional
gmux registers on retinas to control it?
* The MacPro6,1 2013 also has a gmux, the same Renesas R4F2113 as the
retina MacBook Pro. The Mac Pro doesn't have a built-in display,
so what is its purpose? Power control of the dual FirePro GPUs?
Switching of the external DP/Thunderbolt ports? The iFixit teardown
clearly shows one TI HD3SS212 DisplayPort mux on the logic board next
to one of the three Thunderbolt controllers. However six muxes would
be necessary to switch all six ports between GPUs. The mux is probably
necessary for one of the display configurations allowed by Apple,
but which one?
https://www.ifixit.com/Teardown/Mac+Pro+Late+2013+Teardown/20778https://d3nevzfk7ii3be.cloudfront.net/igi/fELBTnt31QhnDsqq.hugehttps://support.apple.com/en-us/HT202801
* Registers we haven't decoded yet:
0x700 32 Bit configmap?
0x708 32 Bit power sequence?
0x712 8 Bit status of clock from panel on retinas?
0x713 8 Bit dito?
0x724 16 Bit backlight, raw value?
0x760 32 Bit backlight
0x764 32 Bit backlight
0x768 8 Bit backlight
0x76a 16 Bit backlight
0x76c 16 Bit backlight
0x76e 16 Bit backlight
0x77f edp/dp/hdmi probe? retina only.
* Addition by Bruno Prémont <bonbons@linux-vserver.org>:
"Missing is also precise knowledge as to what the gmux depends on.
From behavioral reports, it is somehow sensitive to VGA IO/MEM
routing (it apparently needs the routing to go to integrated GPU,
not discrete GPU).
When the routing is inappropriate backlight control IO just reads back
as 0xFF (and eventually gmux IO in general does so)."
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Acked-by: Darren Hart <dvhart@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/da309e436fbeac886477d80376457b7d83ea4b2d.1452431795.git.lukas@wunner.de
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Hardware blocks on the GPU like ACP generate interrupts in
the GPU interrupt controller, but are driven by a separate
driver. Add an irq domain to the GPU driver so that
blocks like ACP can register a Linux interrupt.
Acked-by: Dave Airlie <airlied@redhat.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This provides an interface to get access to the base address
of PCI resources (MMIO, DOORBELL, etc.). Only MMIO and
DOORBELL are implemented right now. This is necessary to
properly utilize shared drivers on platform devices. IP
modules can use this interface to get the base address
of the resource and add any additional offset and set the
size when setting up the platform driver(s).
Acked-by: Dave Airlie <airlied@redhat.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This fixes a spurious warning from an integer overflow on 64-bits systems.
The function may return MAX_SCHEDULE_TIMEOUT which gets truncated to -1.
Explicitly handling this by casting to lret fixes it.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reported-and-tested-by: Joseph Yasi <joe.yasi@gmail.com>
Tested-by: Andreas Reis <andreas.reis@gmail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: drm-intel-fixes@lists.freedesktop.org
Fixes: 3c28ff22f6 ("i915: wait for fence in prepare_plane_fb")
Link: http://patchwork.freedesktop.org/patch/msgid/5666EEC8.2000403@linux.intel.com
- gk20a instmem fixes / improvements
- more gm10x vs gm20x differences deal with
- better support for high-frequency hdmi modes
- pstate control interfaces moved to debugfs
- support for pcie link speed changes
- misc other fixes across the board
* 'linux-4.5' of git://github.com/skeggsb/linux: (50 commits)
drm/nouveau/pmu: prevent falcon from acking interrupts routed to the host
drm/nouveau/perf: change pcie speed on pstate change
drm/nouveau/perf: add fields for pci speed and width and use it for the pstates
drm/nouveau/bios/perf: parse the pci speed from the bios for tesla and newer cards
drm/nouveau/pci: implement pcie speed change for kepler+
drm/nouveau/pci: implement pcie speed change for Fermi
drm/nouveau/pci: implement pcie speed change for tesla
drm/nouveau/pci: implement generic code for pcie speed change
drm/nouveau/pci: add gk104 variant
drm/nouveau/pci: add gf106 variant
drm/nouveau/kms: take mode_config mutex in connector hotplug path
drm/nouveau/nouveau/perfmon: add interface files for current core voltage
drm/nouveau/sysfs: remove pstate interface
drm/nouveau/debugfs: add copy of sysfs pstate interface ported to debugfs
drm/nouveau/debugfs: we need a ctrl object for debugfs
drm/nouveau/debugfs: rename functions to indicate they are used inside drm
drm/nouveau/debugfs: add infrastructure to add files with other fops than only read
drm/nouveau/fifo/gf100: remove references to "daemon"
drm/nouveau/fb/nv50: remove references to "daemon"
drm/nouveau/clk: remove references to "daemon"
...
v2: rename and group functions
v4: change copyright information
move printing of pcie speeds into oneinit,
rename all pcie functions to nvkm_pcie_*
don't try to raise the pcie version when no higher one is supported
v5: revert Copyright changes and rename nvkm_pcie_raise_version to nvkm_pcie_set_version
v6: remove some useless pci_is_pcie checks and rework messages
Signed-off-by: Karol Herbst <nouveau@karolherbst.de>
We will need our own debugfs_init and cleanup functions, because
nouveau_drm isn't ready while the DRM ones are called by DRM.
Signed-off-by: Karol Herbst <nouveau@karolherbst.de>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
v2: use the same object for private data as with the drm debugfs functions
Signed-off-by: Karol Herbst <nouveau@karolherbst.de>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
