Commit Graph

651 Commits

Author SHA1 Message Date
Chris Mason
e038dca803 Merge branch 'for-chris' of git://git.kernel.org/pub/scm/linux/kernel/git/josef/btrfs-work into for-linus
Conflicts:
	fs/btrfs/transaction.c

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-06-17 14:16:13 -04:00
Chris Mason
7585717f30 Btrfs: fix relocation races
The recent commit to get rid of our trans_mutex introduced
some races with block group relocation.  The problem is that relocation
needs to do some record keeping about each root, and it was relying
on the transaction mutex to coordinate things in subtle ways.

This fix adds a mutex just for the relocation code and makes sure
it doesn't have a big impact on normal operations.  The race is
really fixed in btrfs_record_root_in_trans, which is where we
step back and wait for the relocation code to finish accounting
setup.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-06-17 13:36:58 -04:00
Josef Bacik
ed0ca14021 Btrfs: set no_trans_join after trying to expand the transaction
We can lockup if we try to allow new writers join the transaction and we have
flushoncommit set or have a pending snapshot.  This is because we set
no_trans_join and then loop around and try to wait for ordered extents again.
The problem is the ordered endio stuff needs to join the transaction, which it
can't do because no_trans_join is set.  So instead wait until after this loop to
set no_trans_join and then make sure to wait for num_writers == 1 in case
anybody got started in between us exiting the loop and setting no_trans_join.
This could easily be reproduced by mounting -o flushoncommit and running xfstest
13.  It cannot be reproduced with this patch.  Thanks,

Reported-by: Jim Schutt <jaschut@sandia.gov>
Signed-off-by: Josef Bacik <josef@redhat.com>
2011-06-15 13:24:47 -04:00
Sage Weil
38e880540f Btrfs: clear current->journal_info on async transaction commit
Normally current->jouranl_info is cleared by commit_transaction.  For an
async snap or subvol creation, though, it runs in a work queue.  Clear
it in btrfs_commit_transaction_async() to avoid leaking a non-NULL
journal_info when we return to userspace.  When the actual commit runs in
the other thread it won't care that it's current->journal_info is already
NULL.

Signed-off-by: Sage Weil <sage@newdream.net>
Tested-by: Jim Schutt <jaschut@sandia.gov>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-06-10 16:42:29 -04:00
Josef Bacik
3473f3c06a Btrfs: unlock the trans lock properly
In btrfs_wait_for_commit if we came upon a transaction that had committed we
just exited, but that's bad since we are holding the trans_lock.  So break
instead so that the lock is dropped.  Thanks,

Reported-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Josef Bacik <josef@redhat.com>
2011-06-09 10:15:17 -04:00
David Sterba
7841cb2898 btrfs: add helper for fs_info->closing
wrap checking of filesystem 'closing' flag and fix a few missing memory
barriers.

Signed-off-by: David Sterba <dsterba@suse.cz>
2011-06-04 08:11:22 -04:00
Chris Mason
ff5714cca9 Merge branch 'for-chris' of
git://git.kernel.org/pub/scm/linux/kernel/git/josef/btrfs-work into for-linus

Conflicts:
	fs/btrfs/disk-io.c
	fs/btrfs/extent-tree.c
	fs/btrfs/free-space-cache.c
	fs/btrfs/inode.c
	fs/btrfs/transaction.c

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-05-28 07:00:39 -04:00
Josef Bacik
d82a6f1d7e Btrfs: kill BTRFS_I(inode)->block_group
Originally this was going to be used as a way to give hints to the allocator,
but frankly we can get much better hints elsewhere and it's not even used at all
for anything usefull.  In addition to be completely useless, when we initialize
an inode we try and find a freeish block group to set as the inodes block group,
and with a completely full 40gb fs this takes _forever_, so I imagine with say
1tb fs this is just unbearable.  So just axe the thing altoghether, we don't
need it and it saves us 8 bytes in the inode and saves us 500 microseconds per
inode lookup in my testcase.  Thanks,

Signed-off-by: Josef Bacik <josef@redhat.com>
2011-05-23 13:03:12 -04:00
Josef Bacik
a4abeea41a Btrfs: kill trans_mutex
We use trans_mutex for lots of things, here's a basic list

1) To serialize trans_handles joining the currently running transaction
2) To make sure that no new trans handles are started while we are committing
3) To protect the dead_roots list and the transaction lists

Really the serializing trans_handles joining is not too hard, and can really get
bogged down in acquiring a reference to the transaction.  So replace the
trans_mutex with a trans_lock spinlock and use it to do the following

1) Protect fs_info->running_transaction.  All trans handles have to do is check
this, and then take a reference of the transaction and keep on going.
2) Protect the fs_info->trans_list.  This doesn't get used too much, basically
it just holds the current transactions, which will usually just be the currently
committing transaction and the currently running transaction at most.
3) Protect the dead roots list.  This is only ever processed by splicing the
list so this is relatively simple.
4) Protect the fs_info->reloc_ctl stuff.  This is very lightweight and was using
the trans_mutex before, so this is a pretty straightforward change.
5) Protect fs_info->no_trans_join.  Because we don't hold the trans_lock over
the entirety of the commit we need to have a way to block new people from
creating a new transaction while we're doing our work.  So we set no_trans_join
and in join_transaction we test to see if that is set, and if it is we do a
wait_on_commit.
6) Make the transaction use count atomic so we don't need to take locks to
modify it when we're dropping references.
7) Add a commit_lock to the transaction to make sure multiple people trying to
commit the same transaction don't race and commit at the same time.
8) Make open_ioctl_trans an atomic so we don't have to take any locks for ioctl
trans.

I have tested this with xfstests, but obviously it is a pretty hairy change so
lots of testing is greatly appreciated.  Thanks,

Signed-off-by: Josef Bacik <josef@redhat.com>
2011-05-23 13:00:57 -04:00
Josef Bacik
2a1eb4614d Btrfs: if we've already started a trans handle, use that one
We currently track trans handles in current->journal_info, but we don't actually
use it.  This patch fixes it.  This will cover the case where we have multiple
people starting transactions down the call chain.  This keeps us from having to
allocate a new handle and all of that, we just increase the use count of the
current handle, save the old block_rsv, and return.  I tested this with xfstests
and it worked out fine.  Thanks,

Signed-off-by: Josef Bacik <josef@redhat.com>
2011-05-23 13:00:57 -04:00
Josef Bacik
7a7eaa40a3 Btrfs: take away the num_items argument from btrfs_join_transaction
I keep forgetting that btrfs_join_transaction() just ignores the num_items
argument, which leads me to sending pointless patches and looking stupid :).  So
just kill the num_items argument from btrfs_join_transaction and
btrfs_start_ioctl_transaction, since neither of them use it.  Thanks,

Signed-off-by: Josef Bacik <josef@redhat.com>
2011-05-23 13:00:56 -04:00
Chris Mason
712673339a Merge branch 'for-chris' of git://git.kernel.org/pub/scm/linux/kernel/git/arne/btrfs-unstable-arne into inode_numbers
Conflicts:
	fs/btrfs/Makefile
	fs/btrfs/ctree.h
	fs/btrfs/volumes.h

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-05-23 06:30:52 -04:00
Chris Mason
945d8962ce Merge branch 'cleanups' of git://repo.or.cz/linux-2.6/btrfs-unstable into inode_numbers
Conflicts:
	fs/btrfs/extent-tree.c
	fs/btrfs/free-space-cache.c
	fs/btrfs/inode.c
	fs/btrfs/tree-log.c

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-05-22 12:33:42 -04:00
Chris Mason
dcc6d07322 Merge branch 'delayed_inode' into inode_numbers
Conflicts:
	fs/btrfs/inode.c
	fs/btrfs/ioctl.c
	fs/btrfs/transaction.c

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-05-22 07:07:01 -04:00
Miao Xie
16cdcec736 btrfs: implement delayed inode items operation
Changelog V5 -> V6:
- Fix oom when the memory load is high, by storing the delayed nodes into the
  root's radix tree, and letting btrfs inodes go.

Changelog V4 -> V5:
- Fix the race on adding the delayed node to the inode, which is spotted by
  Chris Mason.
- Merge Chris Mason's incremental patch into this patch.
- Fix deadlock between readdir() and memory fault, which is reported by
  Itaru Kitayama.

Changelog V3 -> V4:
- Fix nested lock, which is reported by Itaru Kitayama, by updating space cache
  inode in time.

Changelog V2 -> V3:
- Fix the race between the delayed worker and the task which does delayed items
  balance, which is reported by Tsutomu Itoh.
- Modify the patch address David Sterba's comment.
- Fix the bug of the cpu recursion spinlock, reported by Chris Mason

Changelog V1 -> V2:
- break up the global rb-tree, use a list to manage the delayed nodes,
  which is created for every directory and file, and used to manage the
  delayed directory name index items and the delayed inode item.
- introduce a worker to deal with the delayed nodes.

Compare with Ext3/4, the performance of file creation and deletion on btrfs
is very poor. the reason is that btrfs must do a lot of b+ tree insertions,
such as inode item, directory name item, directory name index and so on.

If we can do some delayed b+ tree insertion or deletion, we can improve the
performance, so we made this patch which implemented delayed directory name
index insertion/deletion and delayed inode update.

Implementation:
- introduce a delayed root object into the filesystem, that use two lists to
  manage the delayed nodes which are created for every file/directory.
  One is used to manage all the delayed nodes that have delayed items. And the
  other is used to manage the delayed nodes which is waiting to be dealt with
  by the work thread.
- Every delayed node has two rb-tree, one is used to manage the directory name
  index which is going to be inserted into b+ tree, and the other is used to
  manage the directory name index which is going to be deleted from b+ tree.
- introduce a worker to deal with the delayed operation. This worker is used
  to deal with the works of the delayed directory name index items insertion
  and deletion and the delayed inode update.
  When the delayed items is beyond the lower limit, we create works for some
  delayed nodes and insert them into the work queue of the worker, and then
  go back.
  When the delayed items is beyond the upper bound, we create works for all
  the delayed nodes that haven't been dealt with, and insert them into the work
  queue of the worker, and then wait for that the untreated items is below some
  threshold value.
- When we want to insert a directory name index into b+ tree, we just add the
  information into the delayed inserting rb-tree.
  And then we check the number of the delayed items and do delayed items
  balance. (The balance policy is above.)
- When we want to delete a directory name index from the b+ tree, we search it
  in the inserting rb-tree at first. If we look it up, just drop it. If not,
  add the key of it into the delayed deleting rb-tree.
  Similar to the delayed inserting rb-tree, we also check the number of the
  delayed items and do delayed items balance.
  (The same to inserting manipulation)
- When we want to update the metadata of some inode, we cached the data of the
  inode into the delayed node. the worker will flush it into the b+ tree after
  dealing with the delayed insertion and deletion.
- We will move the delayed node to the tail of the list after we access the
  delayed node, By this way, we can cache more delayed items and merge more
  inode updates.
- If we want to commit transaction, we will deal with all the delayed node.
- the delayed node will be freed when we free the btrfs inode.
- Before we log the inode items, we commit all the directory name index items
  and the delayed inode update.

I did a quick test by the benchmark tool[1] and found we can improve the
performance of file creation by ~15%, and file deletion by ~20%.

Before applying this patch:
Create files:
        Total files: 50000
        Total time: 1.096108
        Average time: 0.000022
Delete files:
        Total files: 50000
        Total time: 1.510403
        Average time: 0.000030

After applying this patch:
Create files:
        Total files: 50000
        Total time: 0.932899
        Average time: 0.000019
Delete files:
        Total files: 50000
        Total time: 1.215732
        Average time: 0.000024

[1] http://marc.info/?l=linux-btrfs&m=128212635122920&q=p3

Many thanks for Kitayama-san's help!

Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Reviewed-by: David Sterba <dave@jikos.cz>
Tested-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com>
Tested-by: Itaru Kitayama <kitayama@cl.bb4u.ne.jp>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-05-21 09:30:56 -04:00
Arne Jansen
a2de733c78 btrfs: scrub
This adds an initial implementation for scrub. It works quite
straightforward. The usermode issues an ioctl for each device in the
fs. For each device, it enumerates the allocated device chunks. For
each chunk, the contained extents are enumerated and the data checksums
fetched. The extents are read sequentially and the checksums verified.
If an error occurs (checksum or EIO), a good copy is searched for. If
one is found, the bad copy will be rewritten.
All enumerations happen from the commit roots. During a transaction
commit, the scrubs get paused and afterwards continue from the new
roots.

This commit is based on the series originally posted to linux-btrfs
with some improvements that resulted from comments from David Sterba,
Ilya Dryomov and Jan Schmidt.

Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-05-12 14:45:20 +02:00
David Sterba
182608c829 btrfs: remove old unused commented out code
Remove code which has been #if0-ed out for a very long time and does not
seem to be related to current codebase anymore.

Signed-off-by: David Sterba <dsterba@suse.cz>
2011-05-06 12:34:10 +02:00
David Sterba
f993c883ad btrfs: drop unused argument from extent_io_tree_init
all callers pass GFP_NOFS, but the GFP mask argument is not used in the
function; GFP_ATOMIC is passed to radix tree initialization and it's the
only correct one, since we're using the preload/insert mechanism of
radix tree.
Let's drop the gfp mask from btrfs function, this will not change
behaviour.

Signed-off-by: David Sterba <dsterba@suse.cz>
2011-05-02 13:57:21 +02:00
Li Zefan
82d5902d9c Btrfs: Support reading/writing on disk free ino cache
This is similar to block group caching.

We dedicate a special inode in fs tree to save free ino cache.

At the very first time we create/delete a file after mount, the free ino
cache will be loaded from disk into memory. When the fs tree is commited,
the cache will be written back to disk.

To keep compatibility, we check the root generation against the generation
of the special inode when loading the cache, so the loading will fail
if the btrfs filesystem was mounted in an older kernel before.

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
2011-04-25 16:46:11 +08:00
Li Zefan
33345d0152 Btrfs: Always use 64bit inode number
There's a potential problem in 32bit system when we exhaust 32bit inode
numbers and start to allocate big inode numbers, because btrfs uses
inode->i_ino in many places.

So here we always use BTRFS_I(inode)->location.objectid, which is an
u64 variable.

There are 2 exceptions that BTRFS_I(inode)->location.objectid !=
inode->i_ino: the btree inode (0 vs 1) and empty subvol dirs (256 vs 2),
and inode->i_ino will be used in those cases.

Another reason to make this change is I'm going to use a special inode
to save free ino cache, and the inode number must be > (u64)-256.

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
2011-04-25 16:46:09 +08:00
Li Zefan
581bb05094 Btrfs: Cache free inode numbers in memory
Currently btrfs stores the highest objectid of the fs tree, and it always
returns (highest+1) inode number when we create a file, so inode numbers
won't be reclaimed when we delete files, so we'll run out of inode numbers
as we keep create/delete files in 32bits machines.

This fixes it, and it works similarly to how we cache free space in block
cgroups.

We start a kernel thread to read the file tree. By scanning inode items,
we know which chunks of inode numbers are free, and we cache them in
an rb-tree.

Because we are searching the commit root, we have to carefully handle the
cross-transaction case.

The rb-tree is a hybrid extent+bitmap tree, so if we have too many small
chunks of inode numbers, we'll use bitmaps. Initially we allow 16K ram
of extents, and a bitmap will be used if we exceed this threshold. The
extents threshold is adjusted in runtime.

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
2011-04-25 16:46:04 +08:00
Josef Bacik
13c5a93e70 Btrfs: avoid taking the trans_mutex in btrfs_end_transaction
I've been working on making our O_DIRECT latency not suck and I noticed we were
taking the trans_mutex in btrfs_end_transaction.  So to do this we convert
num_writers and use_count to atomic_t's and just decrement them in
btrfs_end_transaction.  Instead of deleting the transaction from the trans list
in put_transaction we do that in btrfs_commit_transaction() since that's the
only time it actually needs to be removed from the list.  Thanks,

Signed-off-by: Josef Bacik <josef@redhat.com>
2011-04-11 20:43:52 -04:00
Josef Bacik
06d5a5899d Btrfs: only retry transaction reservation once
I saw a lockup where we kept getting into this start transaction->commit
transaction loop because of enospce.  The fact is if we fail to make our
reservation, we've tried _everything_ several times, so we only need to try and
commit the transaction once, and if that doesn't work then we really are out of
space and need to just exit.  Thanks,

Signed-off-by: Josef Bacik <josef@redhat.com>
2011-04-08 13:00:32 -04:00
Li Zefan
08fe4db170 Btrfs: Fix uninitialized root flags for subvolumes
root_item->flags and root_item->byte_limit are not initialized when
a subvolume is created. This bug is not revealed until we added
readonly snapshot support - now you mount a btrfs filesystem and you
may find the subvolumes in it are readonly.

To work around this problem, we steal a bit from root_item->inode_item->flags,
and use it to indicate if those fields have been properly initialized.
When we read a tree root from disk, we check if the bit is set, and if
not we'll set the flag and initialize the two fields of the root item.

Reported-by: Andreas Philipp <philipp.andreas@gmail.com>
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Tested-by: Andreas Philipp <philipp.andreas@gmail.com>
cc: stable@kernel.org
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-04-05 01:20:24 -04:00
Yoshinori Sano
6e8df2ae89 Btrfs: fix memory leak in start_transaction()
Free btrfs_trans_handle when join_transaction() fails
in start_transaction()

Signed-off-by: Yoshinori Sano <yoshinori.sano@gmail.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-04-05 01:19:43 -04:00
Tsutomu Itoh
db5b493ac7 Btrfs: cleanup some BUG_ON()
This patch changes some BUG_ON() to the error return.
(but, most callers still use BUG_ON())

Signed-off-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-03-28 05:37:35 -04:00
liubo
1abe9b8a13 Btrfs: add initial tracepoint support for btrfs
Tracepoints can provide insight into why btrfs hits bugs and be greatly
helpful for debugging, e.g
              dd-7822  [000]  2121.641088: btrfs_inode_request: root = 5(FS_TREE), gen = 4, ino = 256, blocks = 8, disk_i_size = 0, last_trans = 8, logged_trans = 0
              dd-7822  [000]  2121.641100: btrfs_inode_new: root = 5(FS_TREE), gen = 8, ino = 257, blocks = 0, disk_i_size = 0, last_trans = 0, logged_trans = 0
 btrfs-transacti-7804  [001]  2146.935420: btrfs_cow_block: root = 2(EXTENT_TREE), refs = 2, orig_buf = 29368320 (orig_level = 0), cow_buf = 29388800 (cow_level = 0)
 btrfs-transacti-7804  [001]  2146.935473: btrfs_cow_block: root = 1(ROOT_TREE), refs = 2, orig_buf = 29364224 (orig_level = 0), cow_buf = 29392896 (cow_level = 0)
 btrfs-transacti-7804  [001]  2146.972221: btrfs_transaction_commit: root = 1(ROOT_TREE), gen = 8
   flush-btrfs-2-7821  [001]  2155.824210: btrfs_chunk_alloc: root = 3(CHUNK_TREE), offset = 1103101952, size = 1073741824, num_stripes = 1, sub_stripes = 0, type = DATA
   flush-btrfs-2-7821  [001]  2155.824241: btrfs_cow_block: root = 2(EXTENT_TREE), refs = 2, orig_buf = 29388800 (orig_level = 0), cow_buf = 29396992 (cow_level = 0)
   flush-btrfs-2-7821  [001]  2155.824255: btrfs_cow_block: root = 4(DEV_TREE), refs = 2, orig_buf = 29372416 (orig_level = 0), cow_buf = 29401088 (cow_level = 0)
   flush-btrfs-2-7821  [000]  2155.824329: btrfs_cow_block: root = 3(CHUNK_TREE), refs = 2, orig_buf = 20971520 (orig_level = 0), cow_buf = 20975616 (cow_level = 0)
 btrfs-endio-wri-7800  [001]  2155.898019: btrfs_cow_block: root = 5(FS_TREE), refs = 2, orig_buf = 29384704 (orig_level = 0), cow_buf = 29405184 (cow_level = 0)
 btrfs-endio-wri-7800  [001]  2155.898043: btrfs_cow_block: root = 7(CSUM_TREE), refs = 2, orig_buf = 29376512 (orig_level = 0), cow_buf = 29409280 (cow_level = 0)

Here is what I have added:

1) ordere_extent:
        btrfs_ordered_extent_add
        btrfs_ordered_extent_remove
        btrfs_ordered_extent_start
        btrfs_ordered_extent_put

These provide critical information to understand how ordered_extents are
updated.

2) extent_map:
        btrfs_get_extent

extent_map is used in both read and write cases, and it is useful for tracking
how btrfs specific IO is running.

3) writepage:
        __extent_writepage
        btrfs_writepage_end_io_hook

Pages are cirtical resourses and produce a lot of corner cases during writeback,
so it is valuable to know how page is written to disk.

4) inode:
        btrfs_inode_new
        btrfs_inode_request
        btrfs_inode_evict

These can show where and when a inode is created, when a inode is evicted.

5) sync:
        btrfs_sync_file
        btrfs_sync_fs

These show sync arguments.

6) transaction:
        btrfs_transaction_commit

In transaction based filesystem, it will be useful to know the generation and
who does commit.

7) back reference and cow:
	btrfs_delayed_tree_ref
	btrfs_delayed_data_ref
	btrfs_delayed_ref_head
	btrfs_cow_block

Btrfs natively supports back references, these tracepoints are helpful on
understanding btrfs's COW mechanism.

8) chunk:
	btrfs_chunk_alloc
	btrfs_chunk_free

Chunk is a link between physical offset and logical offset, and stands for space
infomation in btrfs, and these are helpful on tracing space things.

9) reserved_extent:
	btrfs_reserved_extent_alloc
	btrfs_reserved_extent_free

These can show how btrfs uses its space.

Signed-off-by: Liu Bo <liubo2009@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-03-28 05:37:33 -04:00
Tsutomu Itoh
3612b49598 btrfs: fix return value check of btrfs_join_transaction()
The error check of btrfs_join_transaction()/btrfs_join_transaction_nolock()
is added, and the mistake of the error check in several places is
corrected.

For more stable Btrfs, I think that we should reduce BUG_ON().
But, I think that long time is necessary for this.
So, I propose this patch as a short-term solution.

With this patch:
 - To more stable Btrfs, the part that should be corrected is clarified.
 - The panic isn't done by the NULL pointer reference etc. (even if
   BUG_ON() is increased temporarily)
 - The error code is returned in the place where the error can be easily
   returned.

As a long-term plan:
 - BUG_ON() is reduced by using the forced-readonly framework, etc.

Signed-off-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-01-28 16:40:37 -05:00
liubo
acce952b02 Btrfs: forced readonly mounts on errors
This patch comes from "Forced readonly mounts on errors" ideas.

As we know, this is the first step in being more fault tolerant of disk
corruptions instead of just using BUG() statements.

The major content:
- add a framework for generating errors that should result in filesystems
  going readonly.
- keep FS state in disk super block.
- make sure that all of resource will be freed and released at umount time.
- make sure that fter FS is forced readonly on error, there will be no more
  disk change before FS is corrected. For this, we should stop write operation.

After this patch is applied, the conversion from BUG() to such a framework can
happen incrementally.

Signed-off-by: Liu Bo <liubo2009@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-01-17 15:13:08 -05:00
Li Zefan
b83cc9693f Btrfs: Add readonly snapshots support
Usage:

Set BTRFS_SUBVOL_RDONLY of btrfs_ioctl_vol_arg_v2->flags, and call
ioctl(BTRFS_I0CTL_SNAP_CREATE_V2).

Implementation:

- Set readonly bit of btrfs_root_item->flags.
- Add readonly checks in btrfs_permission (inode_permission),
btrfs_setattr, btrfs_set/remove_xattr and some ioctls.

Changelog for v3:

- Eliminate btrfs_root->readonly, but check btrfs_root->root_item.flags.
- Rename BTRFS_ROOT_SNAP_RDONLY to BTRFS_ROOT_SUBVOL_RDONLY.

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
2010-12-23 08:49:17 +08:00
Josef Bacik
6a91221304 Btrfs: use dget_parent where we can UPDATED
There are lots of places where we do dentry->d_parent->d_inode without holding
the dentry->d_lock.  This could cause problems with rename.  So instead we need
to use dget_parent() and hold the reference to the parent as long as we are
going to use it's inode and then dput it at the end.

Signed-off-by: Josef Bacik <josef@redhat.com>
Cc: raven@themaw.net
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2010-11-21 22:26:09 -05:00
Sage Weil
462045928b Btrfs: add START_SYNC, WAIT_SYNC ioctls
START_SYNC will start a sync/commit, but not wait for it to
complete.  Any modification started after the ioctl returns is
guaranteed not to be included in the commit.  If a non-NULL
pointer is passed, the transaction id will be returned to
userspace.

WAIT_SYNC will wait for any in-progress commit to complete.  If a
transaction id is specified, the ioctl will block and then
return (success) when the specified transaction has committed.
If it has already committed when we call the ioctl, it returns
immediately.  If the specified transaction doesn't exist, it
returns EINVAL.

If no transaction id is specified, WAIT_SYNC will wait for the
currently committing transaction to finish it's commit to disk.
If there is no currently committing transaction, it returns
success.

These ioctls are useful for applications which want to impose an
ordering on when fs modifications reach disk, but do not want to
wait for the full (slow) commit process to do so.

Picky callers can take the transid returned by START_SYNC and
feed it to WAIT_SYNC, and be certain to wait only as long as
necessary for the transaction _they_ started to reach disk.

Sloppy callers can START_SYNC and WAIT_SYNC without a transid,
and provided they didn't wait too long between the calls, they
will get the same result.  However, if a second commit starts
before they call WAIT_SYNC, they may end up waiting longer for
it to commit as well.  Even so, a START_SYNC+WAIT_SYNC still
guarantees that any operation completed before the START_SYNC
reaches disk.

Signed-off-by: Sage Weil <sage@newdream.net>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2010-10-29 15:41:32 -04:00
Sage Weil
bb9c12c945 Btrfs: async transaction commit
Add support for an async transaction commit that is ordered such that any
subsequent operations will join the following transaction, but does not
wait until the current commit is fully on disk.  This avoids much of the
latency associated with the btrfs_commit_transaction for callers concerned
with serialization and not safety.

The wait_for_unblock flag controls whether we wait for the 'middle' portion
of commit_transaction to complete, which is necessary if the caller expects
some of the modifications contained in the commit to be available (this is
the case for subvol/snapshot creation).

Signed-off-by: Sage Weil <sage@newdream.net>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2010-10-29 15:37:34 -04:00
Sage Weil
99d16cbcaf Btrfs: fix deadlock in btrfs_commit_transaction
We calculate timeout (either 1 or MAX_SCHEDULE_TIMEOUT) based on whether
num_writers > 1 or should_grow at the top of the loop.  Then, much much
later, we wait for that timeout if either num_writers or should_grow is
true.  However, it's possible for a racing process (calling
btrfs_end_transaction()) to decrement num_writers such that we wait
forever instead of for 1.

Fix this by deciding how long to wait when we wait.  Include a smp_mb()
before checking if the waitqueue is active to ensure the num_writers
is visible.

Signed-off-by: Sage Weil <sage@newdream.net>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2010-10-29 15:37:34 -04:00
Chris Mason
6b5b817f10 Merge branch 'bug-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/josef/btrfs-work
Conflicts:
	fs/btrfs/extent-tree.c

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2010-10-29 09:27:49 -04:00
Josef Bacik
0af3d00bad Btrfs: create special free space cache inode
In order to save free space cache, we need an inode to hold the data, and we
need a special item to point at the right inode for the right block group.  So
first, create a special item that will point to the right inode, and the number
of extent entries we will have and the number of bitmaps we will have.  We
truncate and pre-allocate space everytime to make sure it's uptodate.

This feature will be turned on as soon as you mount with -o space_cache, however
it is safe to boot into old kernels, they will just generate the cache the old
fashion way.  When you boot back into a newer kernel we will notice that we
modified and not the cache and automatically discard the cache.

Signed-off-by: Josef Bacik <josef@redhat.com>
2010-10-28 15:59:09 -04:00
Josef Bacik
8bb8ab2e93 Btrfs: rework how we reserve metadata bytes
With multi-threaded writes we were getting ENOSPC early because somebody would
come in, start flushing delalloc because they couldn't make their reservation,
and in the meantime other threads would come in and use the space that was
getting freed up, so when the original thread went to check to see if they had
space they didn't and they'd return ENOSPC.  So instead if we have some free
space but not enough for our reservation, take the reservation and then start
doing the flushing.  The only time we don't take reservations is when we've
already overcommitted our space, that way we don't have people who come late to
the party way overcommitting ourselves.  This also moves all of the retrying and
flushing code into reserve_metdata_bytes so it's all uniform.  This keeps my
fs_mark test from returning -ENOSPC as soon as it starts and actually lets me
fill up the disk.  Thanks,

Signed-off-by: Josef Bacik <josef@redhat.com>
2010-10-22 15:55:01 -04:00
Chris Mason
ed3b3d314c Btrfs: don't walk around with task->state != TASK_RUNNING
Yan Zheng noticed two places we were doing a lot of work
without task->state set to TASK_RUNNING.  This sets the state
properly after we get ready to sleep but decide not to.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2010-05-25 10:34:58 -04:00
Yan, Zheng
3fd0a5585e Btrfs: Metadata ENOSPC handling for balance
This patch adds metadata ENOSPC handling for the balance code.
It is consisted by following major changes:

1. Avoid COW tree leave in the phrase of merging tree.

2. Handle interaction with snapshot creation.

3. make the backref cache can live across transactions.

Signed-off-by: Yan Zheng <zheng.yan@oracle.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2010-05-25 10:34:54 -04:00
Yan, Zheng
d68fc57b7e Btrfs: Metadata reservation for orphan inodes
reserve metadata space for handling orphan inodes

Signed-off-by: Yan Zheng <zheng.yan@oracle.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2010-05-25 10:34:52 -04:00
Yan, Zheng
8929ecfa50 Btrfs: Introduce global metadata reservation
Reserve metadata space for extent tree, checksum tree and root tree

Signed-off-by: Yan Zheng <zheng.yan@oracle.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2010-05-25 10:34:52 -04:00
Yan, Zheng
a22285a6a3 Btrfs: Integrate metadata reservation with start_transaction
Besides simplify the code, this change makes sure all metadata
reservation for normal metadata operations are released after
committing transaction.

Changes since V1:

Add code that check if unlink and rmdir will free space.

Add ENOSPC handling for clone ioctl.

Signed-off-by: Yan Zheng <zheng.yan@oracle.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2010-05-25 10:34:50 -04:00
Yan, Zheng
f0486c68e4 Btrfs: Introduce contexts for metadata reservation
Introducing metadata reseravtion contexts has two major advantages.
First, it makes metadata reseravtion more traceable. Second, it can
reclaim freed space and re-add them to the itself after transaction
committed.

Besides add btrfs_block_rsv structure and related helper functions,
This patch contains following changes:

Move code that decides if freed tree block should be pinned into
btrfs_free_tree_block().

Make space accounting more accurate, mainly for handling read only
block groups.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2010-05-25 10:34:50 -04:00
Linus Torvalds
795d580bae Merge git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable
* git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable:
  Btrfs: add check for changed leaves in setup_leaf_for_split
  Btrfs: create snapshot references in same commit as snapshot
  Btrfs: fix small race with delalloc flushing waitqueue's
  Btrfs: use add_to_page_cache_lru, use __page_cache_alloc
  Btrfs: fix chunk allocate size calculation
  Btrfs: kill max_extent mount option
  Btrfs: fail to mount if we have problems reading the block groups
  Btrfs: check btrfs_get_extent return for IS_ERR()
  Btrfs: handle kmalloc() failure in inode lookup ioctl
  Btrfs: dereferencing freed memory
  Btrfs: Simplify num_stripes's calculation logical for __btrfs_alloc_chunk()
  Btrfs: Add error handle for btrfs_search_slot() in btrfs_read_chunk_tree()
  Btrfs: Remove unnecessary finish_wait() in wait_current_trans()
  Btrfs: add NULL check for do_walk_down()
  Btrfs: remove duplicate include in ioctl.c

Fix trivial conflict in fs/btrfs/compression.c due to slab.h include
cleanups.
2010-04-05 13:21:15 -07:00
Sage Weil
6bdb72ded1 Btrfs: create snapshot references in same commit as snapshot
This creates the reference to a new snapshot in the same commit as the
snapshot itself.  This avoids the need for a second commit in order for a
snapshot to be persistent, and also avoids the problem of "leaking" a
new snapshot tree root if the host crashes before the second commit takes
place.

It is not at all clear to me why it wasn't always done this way.  If there
is still a reason for the two-stage {create,finish}_pending_snapshots()
approach I'm missing something!  :)

I've been running this for a couple weeks under pretty heavy usage (a few
snapshots per minute) without obvious problems.

Signed-off-by: Sage Weil <sage@newdream.net>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2010-04-05 14:42:01 -04:00
Zhao Lei
471fa17dff Btrfs: Remove unnecessary finish_wait() in wait_current_trans()
We only need to call finish_wait() after wait loop.

By the way, this patch makes code of waiting loop similar to
example in wait.h(no functional change)

Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2010-03-30 21:19:08 -04:00
Tejun Heo
5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00
Sage Weil
0bdb1db297 Btrfs: flush data on snapshot creation
Flush any delalloc extents when we create a snapshot, so that recently
written file data is always included in the snapshot.

A later commit will add the ability to snapshot without the flush, but
most people expect flushing.

Signed-off-by: Sage Weil <sage@newdream.net>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2010-03-15 11:00:11 -04:00
Eric Paris
6bef4d3171 Btrfs: use RB_ROOT to intialize rb_trees instead of setting rb_node to NULL
btrfs inialize rb trees in quite a number of places by settin rb_node =
NULL;  The problem with this is that 17d9ddc72f in the
linux-next tree adds a new field to that struct which needs to be NULL for
the new rbtree library code to work properly.  This patch uses RB_ROOT as
the intializer so all of the relevant fields will be NULL'd.  Without the
patch I get a panic.

Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2010-03-08 16:26:50 -05:00
Yan, Zheng
86b9f2eca5 Btrfs: Fix per root used space accounting
The bytes_used field in root item was originally planned to
trace the amount of used data and tree blocks. But it never
worked right since we can't trace freeing of data accurately.
This patch changes it to only trace the amount of tree blocks.

Signed-off-by: Yan Zheng <zheng.yan@oracle.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-12-17 12:33:35 -05:00
Yan, Zheng
24bbcf0442 Btrfs: Add delayed iput
iput() can trigger new transactions if we are dropping the
final reference, so calling it in btrfs_commit_transaction
may end up deadlock. This patch adds delayed iput to avoid
the issue.

Signed-off-by: Yan Zheng <zheng.yan@oracle.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-12-17 12:33:35 -05:00
Yan, Zheng
2e4bfab970 Btrfs: Avoid orphan inodes cleanup during committing transaction
btrfs_lookup_dentry may trigger orphan cleanup, so it's not good
to call it while committing a transaction.

Signed-off-by: Yan Zheng <zheng.yan@oracle.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-12-17 12:33:33 -05:00
Yan, Zheng
8cef4e160d Btrfs: Avoid superfluous tree-log writeout
We allow two log transactions at a time, but use same flag
to mark dirty tree-log btree blocks. So we may flush dirty
blocks belonging to newer log transaction when committing a
log transaction. This patch fixes the issue by using two
flags to mark dirty tree-log btree blocks.

Signed-off-by: Yan Zheng <zheng.yan@oracle.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-12-15 21:24:25 -05:00
Josef Bacik
249ac1e55c Btrfs: cleanup transaction starting and fix journal_info usage
We use journal_info to tell if we're in a nested transaction to make sure we
don't commit the transaction within a nested transaction.  We use another
method to see if there are any outstanding ioctl trans handles, so if we're
starting one do not set current->journal_info, since it will screw with other
filesystems.  This patch also cleans up the starting stuff so there aren't any
magic numbers.

Signed-off-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-11-11 14:20:16 -05:00
Chris Mason
690587d109 Btrfs: streamline tree-log btree block writeout
Syncing the tree log is a 3 phase operation.

1) write and wait for all the tree log blocks for a given root.

2) write and wait for all the tree log blocks for the
tree of tree log roots.

3) write and wait for the super blocks (barriers here)

This isn't as efficient as it could be because there is
no requirement to wait for the blocks from step one to hit the disk
before we start writing the blocks from step two.  This commit
changes the sequence so that we don't start waiting until
all the tree blocks from both steps one and two have been sent
to disk.

We do this by breaking up btrfs_write_wait_marked_extents into
two functions, which is trivial because it was already broken
up into two parts.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-10-13 13:35:12 -04:00
Josef Bacik
9ed74f2dba Btrfs: proper -ENOSPC handling
At the start of a transaction we do a btrfs_reserve_metadata_space() and
specify how many items we plan on modifying.  Then once we've done our
modifications and such, just call btrfs_unreserve_metadata_space() for
the same number of items we reserved.

For keeping track of metadata needed for data I've had to add an extent_io op
for when we merge extents.  This lets us track space properly when we are doing
sequential writes, so we don't end up reserving way more metadata space than
what we need.

The only place where the metadata space accounting is not done is in the
relocation code.  This is because Yan is going to be reworking that code in the
near future, so running btrfs-vol -b could still possibly result in a ENOSPC
related panic.  This patch also turns off the metadata_ratio stuff in order to
allow users to more efficiently use their disk space.

This patch makes it so we track how much metadata we need for an inode's
delayed allocation extents by tracking how many extents are currently
waiting for allocation.  It introduces two new callbacks for the
extent_io tree's, merge_extent_hook and split_extent_hook.  These help
us keep track of when we merge delalloc extents together and split them
up.  Reservations are handled prior to any actually dirty'ing occurs,
and then we unreserve after we dirty.

btrfs_unreserve_metadata_for_delalloc() will make the appropriate
unreservations as needed based on the number of reservations we
currently have and the number of extents we currently have.  Doing the
reservation outside of doing any of the actual dirty'ing lets us do
things like filemap_flush() the inode to try and force delalloc to
happen, or as a last resort actually start allocation on all delalloc
inodes in the fs.  This has survived dbench, fs_mark and an fsx torture
test.

Signed-off-by: Josef Bacik <jbacik@redhat.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-09-28 16:29:42 -04:00
Yan, Zheng
76dda93c6a Btrfs: add snapshot/subvolume destroy ioctl
This patch adds snapshot/subvolume destroy ioctl.  A subvolume that isn't being
used and doesn't contains links to other subvolumes can be destroyed.

Signed-off-by: Yan Zheng <zheng.yan@oracle.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-09-21 16:00:26 -04:00
Yan, Zheng
4df27c4d5c Btrfs: change how subvolumes are organized
btrfs allows subvolumes and snapshots anywhere in the directory tree.
If we snapshot a subvolume that contains a link to other subvolume
called subvolA, subvolA can be accessed through both the original
subvolume and the snapshot. This is similar to creating hard link to
directory, and has the very similar problems.

The aim of this patch is enforcing there is only one access point to
each subvolume. Only the first directory entry (the one added when
the subvolume/snapshot was created) is treated as valid access point.
The first directory entry is distinguished by checking root forward
reference. If the corresponding root forward reference is missing,
we know the entry is not the first one.

This patch also adds snapshot/subvolume rename support, the code
allows rename subvolume link across subvolumes.

Signed-off-by: Yan Zheng <zheng.yan@oracle.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-09-21 15:56:00 -04:00
Yan, Zheng
1c4850e21d Btrfs: speed up snapshot dropping
This patch contains two changes to avoid unnecessary tree block reads during
snapshot dropping.

First, check tree block's reference count and flags before reading the tree
block. if reference count > 1 and there is no need to update backrefs, we can
avoid reading the tree block.

Second, save when snapshot was created in root_key.offset. we can compare block
pointer's generation with snapshot's creation generation during updating
backrefs. If a given block was created before snapshot was created, the
snapshot can't be the tree block's owner. So we can avoid reading the block.

Signed-off-by: Yan Zheng <zheng.yan@oracle.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-09-21 15:55:59 -04:00
Yan Zheng
11833d66be Btrfs: improve async block group caching
This patch gets rid of two limitations of async block group caching.
The old code delays handling pinned extents when block group is in
caching. To allocate logged file extents, the old code need wait
until block group is fully cached. To get rid of the limitations,
This patch introduces a data structure to track the progress of
caching. Base on the caching progress, we know which extents should
be added to the free space cache when handling the pinned extents.
The logged file extents are also handled in a similar way.

This patch also changes how pinned extents are tracked. The old
code uses one tree to track pinned extents, and copy the pinned
extents tree at transaction commit time. This patch makes it use
two trees to track pinned extents. One tree for extents that are
pinned in the running transaction, one tree for extents that can
be unpinned. At transaction commit time, we swap the two trees.

Signed-off-by: Yan Zheng <zheng.yan@oracle.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-09-17 15:47:36 -04:00
Chris Mason
f36f3042ea Btrfs: be more polite in the async caching threads
The semaphore used by the async caching threads can prevent a
transaction commit, which can make the FS appear to stall.  This
releases the semaphore more often when a transaction commit is
in progress.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-07-30 10:14:46 -04:00
Yan Zheng
276e680d19 Btrfs: preserve commit_root for async caching
The async block group caching code uses the commit_root pointer
to get a stable version of the extent allocation tree for scanning.
This copy of the tree root isn't going to change and it significantly
reduces the complexity of the scanning code.

During a commit, we have a loop where we update the extent allocation
tree root.  We need to loop because updating the root pointer in
the tree of tree roots may allocate blocks which may change the
extent allocation tree.

Right now the commit_root pointer is changed inside this loop.  It
is more correct to change the commit_root pointer only after all the
looping is done.

Signed-off-by: Yan Zheng <zheng.yan@oracle.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-07-30 09:40:40 -04:00
Sage Weil
ebecd3d9d2 Btrfs: make flushoncommit mount option correctly wait on ordered_extents
The commit_transaction call to wait_ordered_extents when snap_pending
passes nocow_only=1 to process only NOCOW or PREALLOC extents.  This isn't
correct for the 'flushoncommit' mode, as it skips extents we just started
IO on in start_delalloc_inodes.

So, in the flushoncommit case, wait on all ordered extents.  Otherwise,
only pass the nocow_only flag to wait_ordered_extents if snap_pending.

Signed-off-by: Sage Weil <sage@newdream.net>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-07-24 13:17:44 -04:00
Josef Bacik
817d52f8db Btrfs: async block group caching
This patch moves the caching of the block group off to a kthread in order to
allow people to allocate sooner.  Instead of blocking up behind the caching
mutex, we instead kick of the caching kthread, and then attempt to make an
allocation.  If we cannot, we wait on the block groups caching waitqueue, which
the caching kthread will wake the waiting threads up everytime it finds 2 meg
worth of space, and then again when its finished caching.  This is how I tested
the speedup from this

mkfs the disk
mount the disk
fill the disk up with fs_mark
unmount the disk
mount the disk
time touch /mnt/foo

Without my changes this took 11 seconds on my box, with these changes it now
takes 1 second.

Another change thats been put in place is we lock the super mirror's in the
pinned extent map in order to keep us from adding that stuff as free space when
caching the block group.  This doesn't really change anything else as far as the
pinned extent map is concerned, since for actual pinned extents we use
EXTENT_DIRTY, but it does mean that when we unmount we have to go in and unlock
those extents to keep from leaking memory.

I've also added a check where when we are reading block groups from disk, if the
amount of space used == the size of the block group, we go ahead and mark the
block group as cached.  This drastically reduces the amount of time it takes to
cache the block groups.  Using the same test as above, except doing a dd to a
file and then unmounting, it used to take 33 seconds to umount, now it takes 3
seconds.

This version uses the commit_root in the caching kthread, and then keeps track
of how many async caching threads are running at any given time so if one of the
async threads is still running as we cross transactions we can wait until its
finished before handling the pinned extents.  Thank you,

Signed-off-by: Josef Bacik <jbacik@redhat.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-07-24 09:23:39 -04:00
Yan Zheng
4a8c9a62d7 Btrfs: make sure all dirty blocks are written at commit time
Write dirty block groups may allocate new block, and so may add new delayed
back ref. btrfs_run_delayed_refs may make some block groups dirty.

commit_cowonly_roots does not handle the recursion properly, and some dirty
blocks can be left unwritten at commit time. This patch moves
btrfs_run_delayed_refs into the loop that writes dirty block groups, and makes
the code not break out of the loop until there are no dirty block groups or
delayed back refs.

Signed-off-by: Yan Zheng <zheng.yan@oracle.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-07-22 10:07:05 -04:00
Yan Zheng
2c47e605a9 Btrfs: update backrefs while dropping snapshot
The new backref format has restriction on type of backref item.  If a tree
block isn't referenced by its owner tree, full backrefs must be used for the
pointers in it. When a tree block loses its owner tree's reference, backrefs
for the pointers in it should be updated to full backrefs. Current
btrfs_drop_snapshot misses the code that updates backrefs, so it's unsafe for
general use.

This patch adds backrefs update code to btrfs_drop_snapshot.  It isn't a
problem in the restricted form btrfs_drop_snapshot is used today, but for
general snapshot deletion this update is required.

Signed-off-by: Yan Zheng <zheng.yan@oracle.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-07-02 13:41:17 -04:00
Yan Zheng
978d910d31 Btrfs: always update root items for fs trees at commit time
commit_fs_roots skips updating root items for fs trees that aren't modified.
This is unsafe now that relocation code modifies root item's last_snapshot
field without modifying corresponding fs tree.

Signed-off-by: Yan Zheng <zheng.yan@oracle.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-06-15 20:01:02 -04:00
Yan Zheng
5d4f98a28c Btrfs: Mixed back reference (FORWARD ROLLING FORMAT CHANGE)
This commit introduces a new kind of back reference for btrfs metadata.
Once a filesystem has been mounted with this commit, IT WILL NO LONGER
BE MOUNTABLE BY OLDER KERNELS.

When a tree block in subvolume tree is cow'd, the reference counts of all
extents it points to are increased by one.  At transaction commit time,
the old root of the subvolume is recorded in a "dead root" data structure,
and the btree it points to is later walked, dropping reference counts
and freeing any blocks where the reference count goes to 0.

The increments done during cow and decrements done after commit cancel out,
and the walk is a very expensive way to go about freeing the blocks that
are no longer referenced by the new btree root.  This commit reduces the
transaction overhead by avoiding the need for dead root records.

When a non-shared tree block is cow'd, we free the old block at once, and the
new block inherits old block's references. When a tree block with reference
count > 1 is cow'd, we increase the reference counts of all extents
the new block points to by one, and decrease the old block's reference count by
one.

This dead tree avoidance code removes the need to modify the reference
counts of lower level extents when a non-shared tree block is cow'd.
But we still need to update back ref for all pointers in the block.
This is because the location of the block is recorded in the back ref
item.

We can solve this by introducing a new type of back ref. The new
back ref provides information about pointer's key, level and in which
tree the pointer lives. This information allow us to find the pointer
by searching the tree. The shortcoming of the new back ref is that it
only works for pointers in tree blocks referenced by their owner trees.

This is mostly a problem for snapshots, where resolving one of these
fuzzy back references would be O(number_of_snapshots) and quite slow.
The solution used here is to use the fuzzy back references in the common
case where a given tree block is only referenced by one root,
and use the full back references when multiple roots have a reference
on a given block.

This commit adds per subvolume red-black tree to keep trace of cached
inodes. The red-black tree helps the balancing code to find cached
inodes whose inode numbers within a given range.

This commit improves the balancing code by introducing several data
structures to keep the state of balancing. The most important one
is the back ref cache. It caches how the upper level tree blocks are
referenced. This greatly reduce the overhead of checking back ref.

The improved balancing code scales significantly better with a large
number of snapshots.

This is a very large commit and was written in a number of
pieces.  But, they depend heavily on the disk format change and were
squashed together to make sure git bisect didn't end up in a
bad state wrt space balancing or the format change.

Signed-off-by: Yan Zheng <zheng.yan@oracle.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-06-10 11:29:46 -04:00
Chris Mason
59bc5c758e Btrfs: fix deadlocks and stalls on dead root removal
After a transaction commit, the old root of the subvol btrees are sent through
snapshot removal.  This is what actually frees up any blocks replaced by
COW, and anything the old blocks pointed to.

Snapshot deletion will pause when a transaction commit has started, which
helps to avoid a huge amount of delayed reference count updates piling up
as the transaction is trying to close.

But, this pause happens after the snapshot deletion process has asked other
procs on the system to throttle back a bit so that it can make progress.

We don't want to throttle everyone while we're waiting for the transaction
commit, it leads to deadlocks in the user transaction ioctls used by Ceph
and makes things slower in general.

This patch changes things to avoid the throttling while we sleep.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-04-24 15:46:05 -04:00
Sage Weil
dccae99995 Btrfs: add flushoncommit mount option
The 'flushoncommit' mount option forces any data dirtied by a write in a
prior transaction to commit as part of the current commit.  This makes
the committed state a fully consistent view of the file system from the
application's perspective (i.e., it includes all completed file system
operations).  This was previously the behavior only when a snapshot is
created.

This is used by Ceph to ensure that completed writes make it to the
platter along with the metadata operations they are bound to (by
BTRFS_IOC_TRANS_{START,END}).

Signed-off-by: Sage Weil <sage@newdream.net>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-04-02 16:59:01 -04:00
Chris Mason
fa9c0d795f Btrfs: rework allocation clustering
Because btrfs is copy-on-write, we end up picking new locations for
blocks very often.  This makes it fairly difficult to maintain perfect
read patterns over time, but we can at least do some optimizations
for writes.

This is done today by remembering the last place we allocated and
trying to find a free space hole big enough to hold more than just one
allocation.  The end result is that we tend to write sequentially to
the drive.

This happens all the time for metadata and it happens for data
when mounted -o ssd.  But, the way we record it is fairly racey
and it tends to fragment the free space over time because we are trying
to allocate fairly large areas at once.

This commit gets rid of the races by adding a free space cluster object
with dedicated locking to make sure that only one process at a time
is out replacing the cluster.

The free space fragmentation is somewhat solved by allowing a cluster
to be comprised of smaller free space extents.  This part definitely
adds some CPU time to the cluster allocations, but it allows the allocator
to consume the small holes left behind by cow.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-04-03 09:47:43 -04:00
Chris Mason
5a3f23d515 Btrfs: add extra flushing for renames and truncates
Renames and truncates are both common ways to replace old data with new
data.  The filesystem can make an effort to make sure the new data is
on disk before actually replacing the old data.

This is especially important for rename, which many application use as
though it were atomic for both the data and the metadata involved.  The
current btrfs code will happily replace a file that is fully on disk
with one that was just created and still has pending IO.

If we crash after transaction commit but before the IO is done, we'll end
up replacing a good file with a zero length file.  The solution used
here is to create a list of inodes that need special ordering and force
them to disk before the commit is done.  This is similar to the
ext3 style data=ordering, except it is only done on selected files.

Btrfs is able to get away with this because it does not wait on commits
very often, even for fsync (which use a sub-commit).

For renames, we order the file when it wasn't already
on disk and when it is replacing an existing file.  Larger files
are sent to filemap_flush right away (before the transaction handle is
opened).

For truncates, we order if the file goes from non-zero size down to
zero size.  This is a little different, because at the time of the
truncate the file has no dirty bytes to order.  But, we flag the inode
so that it is added to the ordered list on close (via release method).  We
also immediately add it to the ordered list of the current transaction
so that we can try to flush down any writes the application sneaks in
before commit.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-03-31 14:27:58 -04:00
Chris Mason
89573b9c51 Btrfs: Only let very young transactions grow during commit
Commits are fairly expensive, and so btrfs has code to sit around for a while
during the commit and let new writers come in.

But, while we're sitting there, new delayed refs might be added, and those
can be expensive to process as well.  Unless the transaction is very very
young, it makes sense to go ahead and let the commit finish without hanging
around.

The commit grow loop isn't as important as it used to be, the fsync logging
code handles most performance critical syncs now.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-03-24 16:14:28 -04:00
Chris Mason
b7ec40d784 Btrfs: reduce stalls during transaction commit
To avoid deadlocks and reduce latencies during some critical operations, some
transaction writers are allowed to jump into the running transaction and make
it run a little longer, while others sit around and wait for the commit to
finish.

This is a bit unfair, especially when the callers that jump in do a bunch
of IO that makes all the others procs on the box wait.  This commit
reduces the stalls this produces by pre-reading file extent pointers
during btrfs_finish_ordered_io before the transaction is joined.

It also tunes the drop_snapshot code to politely wait for transactions
that have started writing out their delayed refs to finish.  This avoids
new delayed refs being flooded into the queue while we're trying to
close off the transaction.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-03-24 16:14:26 -04:00
Chris Mason
c3e69d58e8 Btrfs: process the delayed reference queue in clusters
The delayed reference queue maintains pending operations that need to
be done to the extent allocation tree.  These are processed by
finding records in the tree that are not currently being processed one at
a time.

This is slow because it uses lots of time searching through the rbtree
and because it creates lock contention on the extent allocation tree
when lots of different procs are running delayed refs at the same time.

This commit changes things to grab a cluster of refs for processing,
using a cursor into the rbtree as the starting point of the next search.
This way we walk smoothly through the rbtree.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-03-24 16:14:26 -04:00
Chris Mason
56bec294de Btrfs: do extent allocation and reference count updates in the background
The extent allocation tree maintains a reference count and full
back reference information for every extent allocated in the
filesystem.  For subvolume and snapshot trees, every time
a block goes through COW, the new copy of the block adds a reference
on every block it points to.

If a btree node points to 150 leaves, then the COW code needs to go
and add backrefs on 150 different extents, which might be spread all
over the extent allocation tree.

These updates currently happen during btrfs_cow_block, and most COWs
happen during btrfs_search_slot.  btrfs_search_slot has locks held
on both the parent and the node we are COWing, and so we really want
to avoid IO during the COW if we can.

This commit adds an rbtree of pending reference count updates and extent
allocations.  The tree is ordered by byte number of the extent and byte number
of the parent for the back reference.  The tree allows us to:

1) Modify back references in something close to disk order, reducing seeks
2) Significantly reduce the number of modifications made as block pointers
are balanced around
3) Do all of the extent insertion and back reference modifications outside
of the performance critical btrfs_search_slot code.

#3 has the added benefit of greatly reducing the btrfs stack footprint.
The extent allocation tree modifications are done without the deep
(and somewhat recursive) call chains used in the past.

These delayed back reference updates must be done before the transaction
commits, and so the rbtree is tied to the transaction.  Throttling is
implemented to help keep the queue of backrefs at a reasonable size.

Since there was a similar mechanism in place for the extent tree
extents, that is removed and replaced by the delayed reference tree.

Yan Zheng <yan.zheng@oracle.com> helped review and fixup this code.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-03-24 16:14:25 -04:00
Chris Mason
9fa8cfe706 Btrfs: don't preallocate metadata blocks during btrfs_search_slot
In order to avoid doing expensive extent management with tree locks held,
btrfs_search_slot will preallocate tree blocks for use by COW without
any tree locks held.

A later commit moves all of the extent allocation work for COW into
a delayed update mechanism, and this preallocation will no longer be
required.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-03-24 16:14:25 -04:00
Yan Zheng
2456242530 Btrfs: hold trans_mutex when using btrfs_record_root_in_trans
btrfs_record_root_in_trans needs the trans_mutex held to make sure two
callers don't race to setup the root in a given transaction.  This adds
it to all the places that were missing it.

Signed-off-by: Yan Zheng <zheng.yan@oracle.com>
2009-02-12 14:14:53 -05:00
Qinghuang Feng
c6e308713a Btrfs: simplify iteration codes
Merge list_for_each* and list_entry to list_for_each_entry*

Signed-off-by: Qinghuang Feng <qhfeng.kernel@gmail.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-01-21 10:59:08 -05:00
Yan Zheng
180591bcfe Btrfs: Use btrfs_join_transaction to avoid deadlocks during snapshot creation
Snapshot creation happens at a specific time during transaction commit.  We
need to make sure the code called by snapshot creation doesn't wait
for the running transaction to commit.

This changes btrfs_delete_inode and finish_pending_snaps to use
btrfs_join_transaction instead of btrfs_start_transaction to avoid deadlocks.

It would be better if btrfs_delete_inode didn't use the join, but the
call path that triggers it is:

btrfs_commit_transaction->create_pending_snapshots->
create_pending_snapshot->btrfs_lookup_dentry->
fixup_tree_root_location->btrfs_read_fs_root->
btrfs_read_fs_root_no_name->btrfs_orphan_cleanup->iput

This will be fixed in a later patch by moving the orphan cleanup to the
cleaner thread.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-01-06 09:58:06 -05:00
Chris Mason
d397712bcc Btrfs: Fix checkpatch.pl warnings
There were many, most are fixed now.  struct-funcs.c generates some warnings
but these are bogus.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-01-05 21:25:51 -05:00
Yan Zheng
52c2617990 Btrfs: update directory's size when creating subvol/snapshot
Make sure directory's size properly updated when creating
subvol/snapshot.

Signed-off-by: Yan Zheng <zheng.yan@oracle.com>
2009-01-05 15:43:43 -05:00
Yan Zheng
d2fb3437e4 Btrfs: fix leaking block group on balance
The block group structs are referenced in many different
places, and it's not safe to free while balancing.  So, those block
group structs were simply leaked instead.

This patch replaces the block group pointer in the inode with the starting byte
offset of the block group and adds reference counting to the block group
struct.

Signed-off-by: Yan Zheng <zheng.yan@oracle.com>
2008-12-11 16:30:39 -05:00
Yan Zheng
a512bbf855 Btrfs: superblock duplication
This patch implements superblock duplication. Superblocks
are stored at offset 16K, 64M and 256G on every devices.
Spaces used by superblocks are preserved by the allocator,
which uses a reverse mapping function to find the logical
addresses that correspond to superblocks. Thank you,

Signed-off-by: Yan Zheng <zheng.yan@oracle.com>
2008-12-08 16:46:26 -05:00
Sage Weil
6e3ad88729 Btrfs: remove unneeded total_trans
Remove unneeded debugging sanity check.  It gets corrupted anyway when
multiple btrfs file systems are mounted, throwing bad warnings along the
way.

Signed-off-by: Sage Weil <sage@newdream.net>
2008-12-02 06:36:10 -05:00
Chris Mason
105d931d48 Btrfs: switch back to wait_on_page_writeback to wait on metadata writes
The extent based waiting was using more CPU, and other fixes have helped
with the unplug storm problems.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-11-18 12:13:12 -05:00
Chris Mason
0660b5af3f Btrfs: Add backrefs and forward refs for subvols and snapshots
Subvols and snapshots can now be referenced from any point in the directory
tree.  We need to maintain back refs for them so we can find lost
subvols.

Forward refs are added so that we know all of the subvols and
snapshots referenced anywhere in the directory tree of a single subvol.  This
can be used to do recursive snapshotting (but they aren't yet) and it is
also used to detect and prevent directory loops when creating new snapshots.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-11-17 20:37:39 -05:00
Chris Mason
3394e1607e Btrfs: Give each subvol and snapshot their own anonymous devid
Each subvolume has its own private inode number space, and so we need
to fill in different device numbers for each subvolume to avoid confusing
applications.

This commit puts a struct super_block into struct btrfs_root so it can
call set_anon_super() and get a different device number generated for
each root.

btrfs_rename is changed to prevent renames across subvols.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-11-17 20:42:26 -05:00
Chris Mason
3de4586c52 Btrfs: Allow subvolumes and snapshots anywhere in the directory tree
Before, all snapshots and subvolumes lived in a single flat directory.  This
was awkward and confusing because the single flat directory was only writable
with the ioctls.

This commit changes the ioctls to create subvols and snapshots at any
point in the directory tree.  This requires making separate ioctls for
snapshot and subvol creation instead of a combining them into one.

The subvol ioctl does:

btrfsctl -S subvol_name parent_dir

After the ioctl is done subvol_name lives inside parent_dir.

The snapshot ioctl does:

btrfsctl -s path_for_snapshot root_to_snapshot

path_for_snapshot can be an absolute or relative path.  btrfsctl breaks it up
into directory and basename components.

root_to_snapshot can be any file or directory in the FS.  The snapshot
is taken of the entire root where that file lives.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-11-17 21:02:50 -05:00
Chris Mason
5f2cc086cc Btrfs: Avoid unplug storms during commit
While doing a commit, btrfs makes sure all the metadata blocks
were properly written to disk, calling wait_on_page_writeback for
each page.  This writeback happens after allowing another transaction
to start, so it competes for the disk with other processes in the FS.

If the page writeback bit is still set, each wait_on_page_writeback might
trigger an unplug, even though the page might be waiting for checksumming
to finish or might be waiting for the async work queue to submit the
bio.

This trades wait_on_page_writeback for waiting on the extent writeback
bits.  It won't trigger any unplugs and substantially improves performance
in a number of workloads.

This also changes the async bio submission to avoid requeueing if there
is only one device.  The requeue just wastes CPU time because there are
no other devices to service.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-11-07 18:22:45 -05:00
Yan Zheng
80ff385665 Btrfs: update nodatacow code v2
This patch simplifies the nodatacow checker. If all references
were created after the latest snapshot, then we can avoid COW
safely. This patch also updates run_delalloc_nocow to do more
fine-grained checking.

Signed-off-by: Yan Zheng <zheng.yan@oracle.com>
2008-10-30 14:20:02 -04:00
Chris Mason
87ef2bb46b Btrfs: prevent looping forever in finish_current_insert and del_pending_extents
finish_current_insert and del_pending_extents process extent tree modifications
that build up while we are changing the extent tree.  It is a confusing
bit of code that prevents recursion.

Both functions run through a list of pending operations and both funcs
add to the list of pending operations.  If you have two procs in either
one of them, they can end up looping forever making more work for each other.

This patch makes them walk forward through the list of pending changes instead
of always trying to process the entire list.  At transaction commit
time, we catch any changes that were left over.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-10-30 11:23:27 -04:00
Yan Zheng
84234f3a1f Btrfs: Add root tree pointer transaction ids
This patch adds transaction IDs to root tree pointers.
Transaction IDs in tree pointers are compared with the
generation numbers in block headers when reading root
blocks of trees. This can detect some types of IO errors.

Signed-off-by: Yan Zheng <zheng.yan@oracle.com>
2008-10-29 14:49:05 -04:00
Josef Bacik
2517920135 Btrfs: nuke fs wide allocation mutex V2
This patch removes the giant fs_info->alloc_mutex and replaces it with a bunch
of little locks.

There is now a pinned_mutex, which is used when messing with the pinned_extents
extent io tree, and the extent_ins_mutex which is used with the pending_del and
extent_ins extent io trees.

The locking for the extent tree stuff was inspired by a patch that Yan Zheng
wrote to fix a race condition, I cleaned it up some and changed the locking
around a little bit, but the idea remains the same.  Basically instead of
holding the extent_ins_mutex throughout the processing of an extent on the
extent_ins or pending_del trees, we just hold it while we're searching and when
we clear the bits on those trees, and lock the extent for the duration of the
operations on the extent.

Also to keep from getting hung up waiting to lock an extent, I've added a
try_lock_extent so if we cannot lock the extent, move on to the next one in the
tree and we'll come back to that one.  I have tested this heavily and it does
not appear to break anything.  This has to be applied on top of my
find_free_extent redo patch.

I tested this patch on top of Yan's space reblancing code and it worked fine.
The only thing that has changed since the last version is I pulled out all my
debugging stuff, apparently I forgot to run guilt refresh before I sent the
last patch out.  Thank you,

Signed-off-by: Josef Bacik <jbacik@redhat.com>
2008-10-29 14:49:05 -04:00
Yan Zheng
f82d02d9d8 Btrfs: Improve space balancing code
This patch improves the space balancing code to keep more sharing
of tree blocks. The only case that breaks sharing of tree blocks is
data extents get fragmented during balancing. The main changes in
this patch are:

Add a 'drop sub-tree' function. This solves the problem in old code
that BTRFS_HEADER_FLAG_WRITTEN check breaks sharing of tree block.

Remove relocation mapping tree. Relocation mappings are stored in
struct btrfs_ref_path and updated dynamically during walking up/down
the reference path. This reduces CPU usage and simplifies code.

This patch also fixes a bug. Root items for reloc trees should be
updated in btrfs_free_reloc_root.

Signed-off-by: Yan Zheng <zheng.yan@oracle.com>
2008-10-29 14:49:05 -04:00
Chris Mason
30c43e2444 Btrfs: remove last_log_alloc allocator optimization
The tree logging code was trying to separate tree log allocations
from normal metadata allocations to improve writeback patterns during
an fsync.

But, the code was not effective and ended up just mixing tree log
blocks with regular metadata.  That seems to be working fairly well,
so the last_log_alloc code can be removed.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-10-03 12:24:01 -04:00
Chris Mason
d352ac6814 Btrfs: add and improve comments
This improves the comments at the top of many functions.  It didn't
dive into the guts of functions because I was trying to
avoid merging problems with the new allocator and back reference work.

extent-tree.c and volumes.c were both skipped, and there is definitely
more work todo in cleaning and commenting the code.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-29 15:18:18 -04:00
Zheng Yan
1a40e23b95 Btrfs: update space balancing code
This patch updates the space balancing code to utilize the new
backref format.  Before, btrfs-vol -b would break any COW links
on data blocks or metadata.  This was slow and caused the amount
of space used to explode if a large number of snapshots were present.

The new code can keeps the sharing of all data extents and
most of the tree blocks.

To maintain the sharing of data extents, the space balance code uses
a seperate inode hold data extent pointers, then updates the references
to point to the new location.

To maintain the sharing of tree blocks, the space balance code uses
reloc trees to relocate tree blocks in reference counted roots.
There is one reloc tree for each subvol, and all reloc trees share
same root key objectid. Reloc trees are snapshots of the latest
committed roots of subvols (root->commit_root).

To relocate a tree block referenced by a subvol, there are two steps.
COW the block through subvol's reloc tree, then update block pointer in
the subvol to point to the new block. Since all reloc trees share
same root key objectid, doing special handing for tree blocks
owned by them is easy. Once a tree block has been COWed in one
reloc tree, we can use the resulting new block directly when the
same block is required to COW again through other reloc trees.
In this way, relocated tree blocks are shared between reloc trees,
so they are also shared between subvols.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-26 10:09:34 -04:00
Zheng Yan
5b21f2ed3f Btrfs: extent_map and data=ordered fixes for space balancing
* Add an EXTENT_BOUNDARY state bit to keep the writepage code
from merging data extents that are in the process of being
relocated.  This allows us to do accounting for them properly.

* The balancing code relocates data extents indepdent of the underlying
inode.  The extent_map code was modified to properly account for
things moving around (invalidating extent_map caches in the inode).

* Don't take the drop_mutex in the create_subvol ioctl.  It isn't
required.

* Fix walking of the ordered extent list to avoid races with sys_unlink

* Change the lock ordering rules.  Transaction start goes outside
the drop_mutex.  This allows btrfs_commit_transaction to directly
drop the relocation trees.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-26 10:05:38 -04:00
Zheng Yan
e465768938 Btrfs: Add shared reference cache
Btrfs has a cache of reference counts in leaves, allowing it to
avoid reading tree leaves while deleting snapshots.  To reduce
contention with multiple subvolumes, this cache is private to each
subvolume.

This patch adds shared reference cache support. The new space
balancing code plays with multiple subvols at the same time, So
the old per-subvol reference cache is not well suited.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-26 10:04:53 -04:00
Chris Mason
d0c803c404 Btrfs: Record dirty pages tree-log pages in an extent_io tree
This is the same way the transaction code makes sure that all the
other tree blocks are safely on disk.  There's an extent_io tree
for each root, and any blocks allocated to the tree logs are
recorded in that tree.

At tree-log sync, the extent_io tree is walked to flush down the
dirty pages and wait for them.

The main benefit is less time spent walking the tree log and skipping
clean pages, and getting sequential IO down to the drive.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25 11:04:07 -04:00
Chris Mason
4bef084857 Btrfs: Tree logging fixes
* Pin down data blocks to prevent them from being reallocated like so:

trans 1: allocate file extent
trans 2: free file extent
trans 3: free file extent during old snapshot deletion
trans 3: allocate file extent to new file
trans 3: fsync new file

Before the tree logging code, this was legal because the fsync
would commit the transation that did the final data extent free
and the transaction that allocated the extent to the new file
at the same time.

With the tree logging code, the tree log subtransaction can commit
before the transaction that freed the extent.  If we crash,
we're left with two different files using the extent.

* Don't wait in start_transaction if log replay is going on.  This
avoids deadlocks from iput while we're cleaning up link counts in the
replay code.

* Don't deadlock in replay_one_name by trying to read an inode off
the disk while holding paths for the directory

* Hold the buffer lock while we mark a buffer as written.  This
closes a race where someone is changing a buffer while we write it.
They are supposed to mark it dirty again after they change it, but
this violates the cow rules.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25 11:04:07 -04:00
Chris Mason
e02119d5a7 Btrfs: Add a write ahead tree log to optimize synchronous operations
File syncs and directory syncs are optimized by copying their
items into a special (copy-on-write) log tree.  There is one log tree per
subvolume and the btrfs super block points to a tree of log tree roots.

After a crash, items are copied out of the log tree and back into the
subvolume.  See tree-log.c for all the details.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25 11:04:07 -04:00
Chris Mason
b64a2851ba Btrfs: Wait for async bio submissions to make some progress at queue time
Before, the btrfs bdi congestion function was used to test for too many
async bios.  This keeps that check to throttle pdflush, but also
adds a check while queuing bios.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25 11:04:06 -04:00
Chris Mason
777e6bd706 Btrfs: Transaction commit: don't use filemap_fdatawait
After writing out all the remaining btree blocks in the transaction,
the commit code would use filemap_fdatawait to make sure it was all
on disk.  This means it would wait for blocks written by other procs
as well.

The new code walks the list of blocks for this transaction again
and waits only for those required by this transaction.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25 11:04:06 -04:00
Yan Zheng
7ea394f119 Btrfs: Fix nodatacow for the new data=ordered mode
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25 11:04:06 -04:00
Yan Zheng
b48652c101 Btrfs: Various small fixes.
This trivial patch contains two locking fixes and a off by one fix.

---

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25 11:04:06 -04:00
Sage Weil
9ca9ee09c1 Btrfs: fix ioctl-initiated transactions vs wait_current_trans()
Commit 597:466b27332893 (btrfs_start_transaction: wait for commits in
progress) breaks the transaction start/stop ioctls by making
btrfs_start_transaction conditionally wait for the next transaction to
start.  If an application artificially is holding a transaction open,
things deadlock.

This workaround maintains a count of open ioctl-initiated transactions in
fs_info, and avoids wait_current_trans() if any are currently open (in
start_transaction() and btrfs_throttle()).  The start transaction ioctl
uses a new btrfs_start_ioctl_transaction() that _does_ call
wait_current_trans(), effectively pushing the join/wait decision to the
outer ioctl-initiated transaction.

This more or less neuters btrfs_throttle() when ioctl-initiated
transactions are in use, but that seems like a pretty fundamental
consequence of wrapping lots of write()'s in a transaction.  Btrfs has no
way to tell if the application considers a given operation as part of it's
transaction.

Obviously, if the transaction start/stop ioctls aren't being used, there
is no effect on current behavior.

Signed-off-by: Sage Weil <sage@newdream.net>
---
 ctree.h       |    1 +
 ioctl.c       |   12 +++++++++++-
 transaction.c |   18 +++++++++++++-----
 transaction.h |    2 ++
 4 files changed, 27 insertions(+), 6 deletions(-)

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25 11:04:06 -04:00
Chris Mason
2dd3e67b1e Btrfs: More throttle tuning
* Make walk_down_tree wake up throttled tasks more often
* Make walk_down_tree call cond_resched during long loops
* As the size of the ref cache grows, wait longer in throttle
* Get rid of the reada code in walk_down_tree, the leaves don't get
  read anymore, thanks to the ref cache.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25 11:04:06 -04:00
Chris Mason
65b51a009e btrfs_search_slot: reduce lock contention by cowing in two stages
A btree block cow has two parts, the first is to allocate a destination
block and the second is to copy the old bock over.

The first part needs locks in the extent allocation tree, and may need to
do IO.  This changeset splits that into a separate function that can be
called without any tree locks held.

btrfs_search_slot is changed to drop its path and start over if it has
to COW a contended block.  This often means that many writers will
pre-alloc a new destination for a the same contended block, but they
cache their prealloc for later use on lower levels in the tree.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25 11:04:06 -04:00
Chris Mason
18e35e0ab3 Btrfs: Throttle less often waiting for snapshots to delete
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25 11:04:06 -04:00
Chris Mason
37d1aeee39 Btrfs: Throttle tuning
This avoids waiting for transactions with pages locked by breaking out
the code to wait for the current transaction to close into a function
called by btrfs_throttle.

It also lowers the limits for where we start throttling.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25 11:04:05 -04:00
Yan
bcc63abbf3 Btrfs: implement memory reclaim for leaf reference cache
The memory reclaiming issue happens when snapshot exists. In that
case, some cache entries may not be used during old snapshot dropping,
so they will remain in the cache until umount.

The patch adds a field to struct btrfs_leaf_ref to record create time. Besides,
the patch makes all dead roots of a given snapshot linked together in order of
create time. After a old snapshot was completely dropped, we check the dead
root list and remove all cache entries created before the oldest dead root in
the list.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25 11:04:05 -04:00
Yan Zheng
f321e49103 Btrfs: Update and fix mount -o nodatacow
To check whether a given file extent is referenced by multiple snapshots, the
checker walks down the fs tree through dead root and checks all tree blocks in
the path.

We can easily detect whether a given tree block is directly referenced by other
snapshot. We can also detect any indirect reference from other snapshot by
checking reference's generation. The checker can always detect multiple
references, but can't reliably detect cases of single reference. So btrfs may
do file data cow even there is only one reference.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25 11:04:05 -04:00
Chris Mason
ab78c84de1 Btrfs: Throttle operations if the reference cache gets too large
A large reference cache is directly related to a lot of work pending
for the cleaner thread.  This throttles back new operations based on
the size of the reference cache so the cleaner thread will be able to keep
up.

Overall, this actually makes the FS faster because the cleaner thread will
be more likely to find things in cache.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25 11:04:05 -04:00
Chris Mason
017e5369eb Btrfs: Leaf reference cache update
This changes the reference cache to make a single cache per root
instead of one cache per transaction, and to key by the byte number
of the disk block instead of the keys inside.

This makes it much less likely to have cache misses if a snapshot
or something has an extra reference on a higher node or a leaf while
the first transaction that added the leaf into the cache is dropping.

Some throttling is added to functions that free blocks heavily so they
wait for old transactions to drop.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25 11:04:05 -04:00
Yan Zheng
31153d8128 Btrfs: Add a leaf reference cache
Much of the IO done while dropping snapshots is done looking up
leaves in the filesystem trees to see if they point to any extents and
to drop the references on any extents found.

This creates a cache so that IO isn't required.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25 11:04:05 -04:00
Josef Bacik
aec7477b3b Btrfs: Implement new dir index format
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25 11:04:05 -04:00
Chris Mason
ed98b56a63 Btrfs: Take the csum mutex while reading checksums
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25 11:04:05 -04:00
Chris Mason
f421950f86 Btrfs: Fix some data=ordered related data corruptions
Stress testing was showing data checksum errors, most of which were caused
by a lookup bug in the extent_map tree.  The tree was caching the last
pointer returned, and searches would check the last pointer first.

But, search callers also expect the search to return the very first
matching extent in the range, which wasn't always true with the last
pointer usage.

For now, the code to cache the last return value is just removed.  It is
easy to fix, but I think lookups are rare enough that it isn't required anymore.

This commit also replaces do_sync_mapping_range with a local copy of the
related functions.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25 11:04:05 -04:00
Chris Mason
f929574938 btrfs_start_transaction: wait for commits in progress to finish
btrfs_commit_transaction has to loop waiting for any writers in the
transaction to finish before it can proceed.  btrfs_start_transaction
should be polite and not join a transaction that is in the process
of being finished off.

There are a few places that can't wait, basically the ones doing IO that
might be needed to finish the transaction.  For them, btrfs_join_transaction
is added.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25 11:04:04 -04:00
Chris Mason
e6dcd2dc9c Btrfs: New data=ordered implementation
The old data=ordered code would force commit to wait until
all the data extents from the transaction were fully on disk.  This
introduced large latencies into the commit and stalled new writers
in the transaction for a long time.

The new code changes the way data allocations and extents work:

* When delayed allocation is filled, data extents are reserved, and
  the extent bit EXTENT_ORDERED is set on the entire range of the extent.
  A struct btrfs_ordered_extent is allocated an inserted into a per-inode
  rbtree to track the pending extents.

* As each page is written EXTENT_ORDERED is cleared on the bytes corresponding
  to that page.

* When all of the bytes corresponding to a single struct btrfs_ordered_extent
  are written, The previously reserved extent is inserted into the FS
  btree and into the extent allocation trees.  The checksums for the file
  data are also updated.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25 11:04:04 -04:00
Chris Mason
77a41afb7d Btrfs: Drop some verbose printks
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25 11:04:04 -04:00
Chris Mason
3f157a2fd2 Btrfs: Online btree defragmentation fixes
The btree defragger wasn't making forward progress because the new key wasn't
being saved by the btrfs_search_forward function.

This also disables the automatic btree defrag, it wasn't scaling well to
huge filesystems.  The auto-defrag needs to be done differently.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25 11:04:04 -04:00
Chris Mason
1b1e2135dc Btrfs: Add a per-inode csum mutex to avoid races creating csum items
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25 11:04:04 -04:00
Chris Mason
a74a4b97b6 Btrfs: Replace the transaction work queue with kthreads
This creates one kthread for commits and one kthread for
deleting old snapshots.  All the work queues are removed.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25 11:04:03 -04:00
Chris Mason
89ce8a63d0 Add btrfs_end_transaction_throttle to force writers to wait for pending commits
The existing throttle mechanism was often not sufficient to prevent
new writers from coming in and making a given transaction run forever.
This adds an explicit wait at the end of most operations so they will
allow the current transaction to close.

There is no wait inside file_write, inode updates, or cow filling, all which
have different deadlock possibilities.

This is a temporary measure until better asynchronous commit support is
added.  This code leads to stalls as it waits for data=ordered
writeback, and it really needs to be fixed.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25 11:04:03 -04:00
Chris Mason
a213501153 Btrfs: Replace the big fs_mutex with a collection of other locks
Extent alloctions are still protected by a large alloc_mutex.
Objectid allocations are covered by a objectid mutex
Other btree operations are protected by a lock on individual btree nodes

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25 11:04:03 -04:00
Chris Mason
925baeddc5 Btrfs: Start btree concurrency work.
The allocation trees and the chunk trees are serialized via their own
dedicated mutexes.  This means allocation location is still not very
fine grained.

The main FS btree is protected by locks on each block in the btree.  Locks
are taken top / down, and as processing finishes on a given level of the
tree, the lock is released after locking the lower level.

The end result of a search is now a path where only the lowest level
is locked.  Releasing or freeing the path drops any locks held.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25 11:04:03 -04:00
Sven Wegener
3b96362cc8 Btrfs: Invalidate dcache entry after creating snapshot and
We need to invalidate an existing dcache entry after creating a new
snapshot or subvolume, because a negative dache entry will stop us from
accessing the new snapshot or subvolume.

---
  ctree.h       |   23 +++++++++++++++++++++++
  inode.c       |    4 ++++
  transaction.c |    4 ++++
  3 files changed, 31 insertions(+)

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25 11:04:03 -04:00
Chris Mason
48ec2cf873 Btrfs: Fix race in running_transaction checks
When a new transaction was started, the code would incorrectly
set the pointer in fs_info before all the data structures were setup.
fsync heavy workloads hit races on the setup of the ordered inode spinlock

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25 11:04:03 -04:00
Chris Mason
a061fc8da7 Btrfs: Add support for online device removal
This required a few structural changes to the code that manages bdev pointers:

The VFS super block now gets an anon-bdev instead of a pointer to the
lowest bdev.  This allows us to avoid swapping the super block bdev pointer
around at run time.

The code to read in the super block no longer goes through the extent
buffer interface.  Things got ugly keeping the mapping constant.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25 11:04:02 -04:00
Chris Mason
d6bfde8765 Btrfs: Fixes for 2.6.18 enterprise kernels
2.6.18 seems to get caught in an infinite loop when
cancel_rearming_delayed_workqueue is called more than once, so this switches
to cancel_delayed_work, which is arguably more correct.

Also, balance_dirty_pages can run into problems with 2.6.18 based kernels
because it doesn't have the per-bdi dirty limits.  This avoids calling
balance_dirty_pages on the btree inode unless there is actually something
to balance, which is a good optimization in general.

Finally there's a compile fix for ordered-data.h

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25 11:04:02 -04:00
Chris Mason
81d7ed29ff Btrfs: Throttle file_write when data=ordered is flushing the inode
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25 11:04:02 -04:00
Chris Mason
ce9adaa5a7 Btrfs: Do metadata checksums for reads via a workqueue
Before, metadata checksumming was done by the callers of read_tree_block,
which would set EXTENT_CSUM bits in the extent tree to show that a given
range of pages was already checksummed and didn't need to be verified
again.

But, those bits could go away via try_to_releasepage, and the end
result was bogus checksum failures on pages that never left the cache.

The new code validates checksums when the page is read.  It is a little
tricky because metadata blocks can span pages and a single read may
end up going via multiple bios.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25 11:04:01 -04:00
Chris Mason
0b86a832a1 Btrfs: Add support for multiple devices per filesystem
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25 11:04:00 -04:00
Chris Mason
80b6794d11 Btrfs: Lower stack usage in transaction.c
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25 11:04:00 -04:00
Chris Mason
4529ba495c Btrfs: Add data block hints to SSD mode too
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25 11:04:00 -04:00
Chris Mason
d1310b2e0c Btrfs: Split the extent_map code into two parts
There is now extent_map for mapping offsets in the file to disk and
extent_io for state tracking, IO submission and extent_bufers.

The new extent_map code shifts from [start,end] pairs to [start,len], and
pushes the locking out into the caller.  This allows a few performance
optimizations and is easier to use.

A number of extent_map usage bugs were fixed, mostly with failing
to remove extent_map entries when changing the file.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25 11:03:59 -04:00
Chris Mason
e18e4809b1 Btrfs: Add mount -o ssd, which includes optimizations for seek free storage
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25 11:03:59 -04:00
Chris Mason
4d5e74bc0a Btrfs: Fix data=ordered vs wait_on_inode deadlock on older kernels
Using ilookup5 during data=ordered writeback could deadlock on I_LOCK.  This
saves a pointer to the inode instead.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25 11:03:59 -04:00
Chris Mason
2da98f003f Btrfs: Run igrab on data=ordered inodes to prevent deadlocks during writeout
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25 11:03:59 -04:00
Chris Mason
cee36a03e8 Rework btrfs_drop_inode to avoid scheduling
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25 11:03:59 -04:00
Chris Mason
e2008b6140 Btrfs: Add some simple throttling to wait for data=ordered and snapshot deletion
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25 11:03:59 -04:00
Chris Mason
3063d29f2a Btrfs: Move snapshot creation to commit time
It is very difficult to create a consistent snapshot of the btree when
other writers may update the btree before the commit is done.

This changes the snapshot creation to happen during the commit, while
no other updates are possible.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25 11:03:59 -04:00
Chris Mason
dc17ff8f11 Btrfs: Add data=ordered support
This forces file data extents down the disk along with the metadata that
references them.  The current implementation is fairly simple, and just
writes out all of the dirty pages in an inode before the commit.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25 11:03:59 -04:00
Chris Mason
4313b3994d Btrfs: Reduce stack usage in the resizer, fix 32 bit compiles
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25 11:03:58 -04:00
Chris Mason
6da6abae02 Btrfs: Back port to 2.6.18-el kernels
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25 11:03:58 -04:00
Christian Hesse
17636e03f4 Btrfs: section mismatch warnings
--Boundary-00=_CcOWHFYK4T+JwSj
Content-Type: text/plain;
  charset="iso-8859-1"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline

Hello everybody,

compiling btrfs into the kernel results in section mismatch warnings. __exit
functions are called where they are not allowed to. The attached patch fixes
this for me. Not sure if it is correct though.

Signed-off-by: Christian Hesse <mail@earthworm.de>
--
Regards,
Chris

--Boundary-00=_CcOWHFYK4T+JwSj
Content-Type: text/x-diff; charset="iso-8859-1";
	name="btrfs-section_mismatches.patch"
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment;
	filename="btrfs-section_mismatches.patch"

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25 11:03:58 -04:00
Chris Mason
35ebb934bd Btrfs: Fix PAGE_CACHE_SHIFT shifts on 32 bit machines
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25 11:03:57 -04:00
Chris Mason
a6b6e75e09 Btrfs: Defrag only leaves, and only when the parent node has a single objectid
This allows us to defrag huge directories, but skip the expensive defrag
case in more common usage, where it does not help as much.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25 11:03:57 -04:00
Chris Mason
4dc119046d Btrfs: Add an extent buffer LRU to reduce radix tree hits
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25 11:03:56 -04:00
Chris Mason
6b80053d02 Btrfs: Add back the online defragging code
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25 11:03:56 -04:00
Chris Mason
db94535db7 Btrfs: Allow tree blocks larger than the page size
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25 11:03:56 -04:00
Chris Mason
1a5bc167f6 Btrfs: Change the remaining radix trees used by extent-tree.c to extent_map trees
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25 11:03:56 -04:00
Chris Mason
f510cfecfc Btrfs: Fix extent_buffer and extent_state leaks
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25 11:03:56 -04:00
Chris Mason
5f39d397df Btrfs: Create extent_buffer interface for large blocksizes
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25 11:03:56 -04:00
Chris Mason
d3c2fdcf7b Btrfs: Use balance_dirty_pages_nr on btree blocks
btrfs_btree_balance_dirty is changed to pass the number of pages dirtied
for more accurate dirty throttling.  This lets the VM make better decisions
about when to force some writeback.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25 11:00:48 -04:00
Chris Mason
5ce14bbcdd Btrfs: Find and remove dead roots the first time a root is loaded.
Dead roots are trees left over after a crash, and they were either in the
process of being removed or were waiting to be removed when the box crashed.
Before, a search of the entire tree of root pointers was done on mount
looking for dead roots.  Now, the search is done the first time we load
a root.

This makes mount faster when there are a large number of snapshots, and it
enables the block accounting code to properly update the block counts on
the latest root as old versions of the root are reaped after a crash.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2007-09-11 11:15:39 -04:00
Josef Bacik
58176a9604 Btrfs: Add per-root block accounting and sysfs entries
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2007-08-29 15:47:34 -04:00
Josef Bacik
15ee9bc7ed Btrfs: delay commits during fsync to allow more writers
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2007-08-10 16:22:09 -04:00
Chris Mason
e9d0b13b5b Btrfs: Btree defrag on the extent-mapping tree as well
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2007-08-10 14:06:19 -04:00
Chris Mason
409eb95d7f Btrfs: Further reduce the concurrency penalty of defrag and drop_snapshot
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2007-08-08 20:17:12 -04:00
Chris Mason
26b8003f10 Btrfs: Replace extent tree preallocation code with some bit radix magic.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2007-08-08 20:17:12 -04:00
Chris Mason
f4468e94c8 Btrfs: Let some locks go during defrag and snapshot dropping
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2007-08-08 10:08:58 -04:00
Chris Mason
6702ed490c Btrfs: Add run time btree defrag, and an ioctl to force btree defrag
This adds two types of btree defrag, a run time form that tries to
defrag recently allocated blocks in the btree when they are still in ram,
and an ioctl that forces defrag of all btree blocks.

File data blocks are not defragged yet, but this can make a huge difference
in sequential btree reads.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2007-08-07 16:15:09 -04:00
Chris Mason
9f3a742736 Btrfs: Do snapshot deletion in smaller chunks.
Before, snapshot deletion was a single atomic unit.  This caused considerable
lock contention and required an unbounded amount of space.  Now,
the drop_progress field in the root item is used to indicate how far along
snapshot deletion is, and to resume where it left off.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2007-08-07 15:52:19 -04:00
Zach Brown
ec6b910fb3 Btrfs: trivial include fixups
Almost none of the files including module.h need to do so,
remove them.

Include sched.h in extent-tree.c to silence a warning about cond_resched()
being undeclared.

Signed-off-by: Zach Brown <zach.brown@oracle.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2007-07-11 10:00:37 -04:00
Chris Mason
ccd467d60e Btrfs: crash recovery fixes
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2007-06-28 15:57:36 -04:00
Chris Mason
4b52dff6d3 Btrfs: Fix super block updates during transaction commit
The super block written during commit was not consistent with the state of
the trees.  This change adds an in-memory copy of the super so that we can
make sure to write out consistent data during a commit.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2007-06-26 10:06:50 -04:00
Chris Mason
22bb92f376 Btrfs: Documentation update
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2007-06-22 14:49:31 -04:00
Chris Mason
5eda7b5e9b Btrfs: Add the ability to find and remove dead roots after a crash.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2007-06-22 14:16:25 -04:00
Chris Mason
54aa1f4dfd Btrfs: Audit callers and return codes to make sure -ENOSPC gets up the stack
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2007-06-22 14:16:25 -04:00
Chris Mason
8c2383c3dd Subject: Rework btrfs_file_write to only allocate while page locks are held
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2007-06-18 09:57:58 -04:00
Chris Mason
340887809d Btrfs: i386 fixes from axboe
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2007-06-12 11:36:58 -04:00
Chris Mason
6cbd557078 Btrfs: add GPLv2
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2007-06-12 09:07:21 -04:00
Chris Mason
0cf6c62017 Btrfs: remove device tree
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2007-06-09 09:22:25 -04:00
Chris Mason
ad693af684 Btrfs: reap dead roots right after commit
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2007-06-09 08:19:57 -04:00
Chris Mason
facda1e787 Btrfs: get forced transaction commits via workqueue
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2007-06-08 18:11:48 -04:00
Chris Mason
08607c1b18 Btrfs: add compat ioctl
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2007-06-08 15:33:54 -04:00
Chris Mason
e37c9e6921 Btrfs: many allocator fixes, pretty solid
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2007-05-09 20:13:14 -04:00
Chris Mason
35b7e47610 Btrfs: fix page cache memory leak
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2007-05-02 15:53:43 -04:00
Chris Mason
31f3c99b73 Btrfs: allocator improvements, inode block groups
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2007-04-30 15:25:45 -04:00
Chris Mason
7c4452b9a6 Btrfs: smarter transaction writeback
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2007-04-28 09:29:35 -04:00
Chris Mason
9078a3e1e4 Btrfs: start of block group code
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2007-04-26 16:46:15 -04:00
Chris Mason
8fd17795b2 Btrfs: early fsync support
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2007-04-19 21:01:03 -04:00
Chris Mason
8352d8a473 Btrfs: add disk ioctl, mostly working
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2007-04-12 10:43:05 -04:00
Chris Mason
7eccb903a8 Btrfs: create a logical->phsyical block number mapping scheme
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2007-04-11 15:53:25 -04:00
Chris Mason
2619ba1f0f Btrfs: subvolumes
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2007-04-10 16:58:11 -04:00
Chris Mason
d0dbc6245c Btrfs: drop owner and parentid
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2007-04-10 12:36:36 -04:00
Chris Mason
1b05da2ee6 Btrfs: drop the inode map tree
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2007-04-10 12:13:09 -04:00
Chris Mason
0f7d52f443 Btrfs: groundwork for subvolume and snapshot roots
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2007-04-09 10:42:37 -04:00
Chris Mason
d6e4a428eb Btrfs: start of support for many FS volumes
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2007-04-06 15:37:36 -04:00
Chris Mason
7cfcc17e7f Btrfs: corruptions fixed
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2007-04-02 14:53:59 -04:00
Chris Mason
2c90e5d658 Btrfs: still corruption hunting
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2007-04-02 10:50:19 -04:00
Chris Mason
d602557953 Btrfs: corruption hunt continues
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2007-03-30 14:27:56 -04:00
Chris Mason
22b0ebda6c Btrfs: hunting slab corruption
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2007-03-30 08:47:31 -04:00
Chris Mason
d98237b3ed Btrfs: use a btree inode instead of sb_getblk
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2007-03-28 13:57:48 -04:00
Chris Mason
78fae27ebf Btrfs: leak fixes, pinning fixes
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2007-03-25 11:35:08 -04:00
Chris Mason
d571976292 btrfs_create, btrfs_write_super, btrfs_sync_fs
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2007-03-23 10:01:08 -04:00
Chris Mason
79154b1b5b Btrfs: transaction rework
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2007-03-22 15:59:16 -04:00