Since the partial tiling tests are poking into the GGTT to watch the
fence registers in operation, it itself needs the device rpm wakeref in
order for the GGTT to remain accessible.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171107115653.10716-1-chris@chris-wilson.co.uk
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
The vma routines are responsible for acquiring the device rpm wakeref
before they poke the HW. However, some of the selftests bypass the
higher level vma routines in order to poke directly at the lowlevel GGTT
functions; these are then responsible for managing rpm themselves.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171107114051.10583-1-chris@chris-wilson.co.uk
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
If we only have 4k pages, we can't mix together different combinations
of hugepages to see if the world burns. However, as the loops did
nothing, we never set err to 0 and reported ENODEV aborting the test.
Teach the test to skip instead.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171107110559.6098-1-chris@chris-wilson.co.uk
Reviewed-by: Matthew Auld <matthew.william.auld@gmail.com>
Smatch warns of
drivers/gpu/drm/i915/intel_pm.c:1161 g4x_compute_wm() warn: signedness bug returning '(-33554430)'
which is a result of it believing that wm may be INT_MAX following
g4x_tlb_miss_wa(). Just declaring g4x_tlb_miss_wa() as returning an
unsigned integer is not sufficient, we need to tell smatch that wm itself
is unsigned for it to not worry. So mark up the locals we expect to be
non-negative, and so silence smatch.
v2: Mark up vlv_compute_wm_level() as unsigned similarly.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> #v1
Link: https://patchwork.freedesktop.org/patch/msgid/20171107140338.13748-1-chris@chris-wilson.co.uk
Older compilers (gcc-4.9) are not as able to track uninitialised
variables as well as more recent compilers. In particular,
drivers/gpu/drm/i915/intel_dpio_phy.c: In function ‘bxt_ddi_phy_init’:
drivers/gpu/drm/i915/intel_dpio_phy.c:482:25: warning: ‘was_enabled’ may be used uninitialized in this function [-Wmaybe-uninitialized]
In this case, we can rearrange code slightly to make the control flow
clearer to the reader, as well as the compiler. That is we only call
uninit using the same predicate as calling init
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171107135324.28300-1-chris@chris-wilson.co.uk
Reviewed-by: Gabriel Krisman Bertazi <krisman@collabora.co.uk>
gcc-4.7 is not very smart and can not tell that "si" is guarded by size
being 0. So it complains,
drivers/gpu/drm/i915/intel_csr.c: In function ‘csr_load_work_fn’:
drivers/gpu/drm/i915/intel_csr.c:204:3: warning: ‘si’ may be used uninitialized in this function [-Wmaybe-uninitialized]
drivers/gpu/drm/i915/intel_csr.c:190:30: note: ‘si’ was declared in
Give in and mark si as NULL.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171107145334.27154-1-chris@chris-wilson.co.uk
Reviewed-by: Gabriel Krisman Bertazi <krisman@collabora.co.uk>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
drivers/gpu/drm/i915/i915_cmd_parser.c:808:23: error: not an lvalue
drivers/gpu/drm/i915/i915_cmd_parser.c:811:23: error: not an lvalue
drivers/gpu/drm/i915/i915_cmd_parser.c:814:23: error: not an lvalue
drivers/gpu/drm/i915/i915_cmd_parser.c:808:23: error: not an lvalue
drivers/gpu/drm/i915/i915_cmd_parser.c:811:23: error: not an lvalue
drivers/gpu/drm/i915/i915_cmd_parser.c:814:23: error: not an lvalue
drivers/gpu/drm/i915/i915_cmd_parser.c:808:23: error: not an lvalue
drivers/gpu/drm/i915/i915_cmd_parser.c:811:23: error: not an lvalue
drivers/gpu/drm/i915/i915_cmd_parser.c:814:23: error: not an lvalue
drivers/gpu/drm/i915/i915_cmd_parser.c:808:23: error: not an lvalue
drivers/gpu/drm/i915/i915_cmd_parser.c:811:23: error: not an lvalue
drivers/gpu/drm/i915/i915_cmd_parser.c:814:23: error: not an lvalue
If we move the shift into each case not only do we kill the warning from
smatch, but we shrink the code slightly:
text data bss dec hex filename
1267906 20587 3168 1291661 13b58d before
1267890 20587 3168 1291645 13b57d after
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171107154055.19460-1-chris@chris-wilson.co.uk
Reviewed-by: Matthew Auld <matthew.william.auld@gmail.com>
Reviewed-by: Gabriel Krisman Bertazi <krisman@collabora.co.uk>
Capturing and cleanup and modparams in error state requires
some macro tricks. Move that code into separated functions
for easier maintenance.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171026173657.49648-3-michal.wajdeczko@intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
We keep details of GuC and HuC in separate error state struct.
Make GuC log part of it to group all related data together.
Since we are printing uC details at the end, with this change
GuC log will be moved there too.
v2: comment on new placement of the log (Chris)
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171026173657.49648-2-michal.wajdeczko@intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Include GuC and HuC firmware details in captured error state
to provide additional debug information. To reuse existing
uc firmware pretty printer, introduce new drm-printer variant
that works with our i915_error_state_buf output. Also update
uc firmware pretty printer to accept const input.
v2: don't rely on current caps (Chris)
dump correct fw info (Michal)
v3: simplify capture of custom paths (Chris)
v4: improve 'why' comment (Joonas)
trim output if no fw path (Michal)
group code around uc error state (Michal)
v5: use error in cleanup_uc (Michal)
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171026173657.49648-1-michal.wajdeczko@intel.com
[ickle: allow printing uc_fw after allocation failure]
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Silence smatch by demonstrating that ctch->vma is allocated
following a successful chch_init()
drivers/gpu/drm/i915/intel_guc_ct.c:204 ctch_open() error:
we previously assumed 'ctch->vma' could be null (see line 197)
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171106135154.52520-1-michal.wajdeczko@intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Silence smatch by demonstrating that guc->stage_desc_pool is allocated
following a successful guc_stage_desc_pool_create(),
drivers/gpu/drm/i915/i915_guc_submission.c:1293 i915_guc_submission_init() error: we previously assumed 'guc->stage_desc_pool' could be null (see line 1261)
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Oscar Mateo <oscar.mateo@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171106114833.31199-1-chris@chris-wilson.co.uk
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
As we bind, and unbind on error, we want to be sure that the vma->flags
are updated to reflect the binding state so that on the next invocation
all is well.
v2: Take two.
v3: Take three; vma-misplaced is checking map-and-fenceable so keep it
last!
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171105124550.32715-1-chris@chris-wilson.co.uk
Reviewed-by: Matthew Auld <matthew.william.auld@gmail.com>
After a reset, we may immediately begin executing requests on restarting
the engines. Ergo this has to be last step with all re-initialisation
completed beforehand. The mocs setup was after we started executing the
requests; do it earlier!
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171102131430.22328-1-chris@chris-wilson.co.uk
GEM_BUG_ON if the packed bits do not fit into the specified width.
v2: Avoid using the macro argument twice.
v3: Drop unnecessary braces. (Joonas)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> (v1)
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171103090538.14474-1-tvrtko.ursulin@linux.intel.com
We have to reject unknown flags for uAPI considerations, and also
because the curent implementation limits their i915 storage space
to two bits.
v2: (Chris Wilson)
* Fix fail in ABI check.
* Added unknown flags and BUILD_BUG_ON.
v3:
* Use ARCH_KMALLOC_MINALIGN instead of alignof. (Chris Wilson)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes: cf6e7bac63 ("drm/i915: Add support for drm syncobjs")
Cc: Jason Ekstrand <jason@jlekstrand.net>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: David Airlie <airlied@linux.ie>
Cc: intel-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171031102326.9738-1-tvrtko.ursulin@linux.intel.com
Because dev_priv is 0-ed it's not currently an issue, but since we
have dev_priv->perf.oa.test_config.uuid size at uuid + 1, we could
just copy the null character.
v2: Use strlcpy instead of strncpy (Chris)
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171102121827.436-1-lionel.g.landwerlin@intel.com
There is a possibility on gen9 hardware to miss the forcewake ack
message. The recommended workaround is to use another free
bit and toggle it until original bit is successfully acknowledged.
Some future gen9 revs might or might not fix the underlying issue but
using fallback forcewake bit dance can be considered as harmless:
without the ack timeout we never reach the fallback bit forcewake.
Thus as of now we adopt a blanket approach for all gen9 and leave
the bypassing the fallback bit approach for future patches if
corresponding hw revisions do appear.
Commit 83e3337204 ("drm/i915: Increase maximum polling time to 50ms
for forcewake request/clear ack") did increase the forcewake timeout.
If the issue was a delayed ack, future work could include finding
a suitable timeout value both for primary ack and reserve toggle
to reduce the worst case latency.
v2: use bit 15, naming, comment (Chris), only wait fallback ack
v3: fix return on fallback, backoff after fallback write (Chris)
v4: udelay on first pass, grammar (Chris)
v4: s/reserve/fallback
References: HSDES #1604254524
References: https://bugs.freedesktop.org/show_bug.cgi?id=102051
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171102094836.2506-1-mika.kuoppala@linux.intel.com
This patch adds per engine reset and recovery (TDR) support when GuC is
used to submit workloads to GPU.
In the case of i915 directly submission to ELSP, driver manages hang
detection, recovery and resubmission. With GuC submission these tasks
are shared between driver and GuC. i915 is still responsible for detecting
a hang, and when it does it only requests GuC to reset that Engine. GuC
internally manages acquiring forcewake and idling the engine before
resetting it.
Once the reset is successful, i915 takes over again and handles the
resubmission. The scheduler in i915 knows which requests are pending so
after resetting a engine, pending workloads/requests are resubmitted
again.
v2: s/i915_guc_request_engine_reset/i915_guc_reset_engine/ to match the
non-guc function names.
v3: Removed debug message about engine restarting from which request,
since the new baseline do it regardless of submission mode. (Chris)
v4: Rebase.
v5: Do not pass unnecessary reporting flags to the fw (Jeff);
tasklet_schedule(&execlists->irq_tasklet) handles the resubmit; rebase.
v6: Rename the existing reset engine function and share a similar
interface between guc and non-guc paths (Chris).
Signed-off-by: Michel Thierry <michel.thierry@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171031225309.10888-1-michel.thierry@intel.com
Reviewed-by: Jeff McGee <jeff.mcgee@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
intel_guc_reset sounds more like the microcontroller is the one performing
a reset, while in this case is the opposite. intel_reset_guc not only
makes it clearer, it follows the other intel_reset functions available.
v2: Print error message in English (Tvrtko).
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Signed-off-by: Michel Thierry <michel.thierry@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171030185616.32836-2-michel.thierry@intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
If GuC firmware performs an engine reset while that engine had a
preemption pending, it will set the terminated attribute bit on our
preemption stage descriptor. GuC firmware retains all pending work
items for a high-priority GuC client, unlike the normal-priority GuC
client where work items are dropped. It wants to make sure the preempt-
to-idle work doesn't run when scheduling resumes, and uses this bit to
inform its scheduler and presumably us as well. Our job is to clear it
for the next preemption after reset, otherwise that and future
preemptions will never complete. We'll just clear it every time.
Signed-off-by: Jeff McGee <jeff.mcgee@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171101221630.25086-1-jeff.mcgee@intel.com
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
For Cannonlake the number of scalers for each pipe is 2. Let's increase
the number of scalers for pipe C.
v2: Use INTEL_GEN() instead of IS_CANNONLAKE()
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1509530930-24960-1-git-send-email-mika.kahola@intel.com
We will want to break this down to give detailed per-engine warnings as
to why we still think we are active as we attempt to park the engines.
For the first step, just move the warning verbatim from the idle-worker
to intel_engines_park().
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171027110617.31745-3-chris@chris-wilson.co.uk
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
We will disarm the breadcrumb interrupt if we see a user interrupt
whilst no one is waiting. This may race with the call to
intel_engine_disarm_breadcrumbs() triggering an assert that we aren't
trying to do the same job twice. Prevent this by checking that the irq
is still armed after flushing the interrupt (for the irq spinlock).
Fixes: bcbd5c33a3 ("drm/i915/guc: Always enable the breadcrumbs irq")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171031122235.1395-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
In case the object has changed tiling between calls to execbuf, we need
to check if the existing offset inside the GTT matches the new tiling
constraint. We even need to do this for "unfenced" tiled objects, where
the 3D commands use an implied fence and so the object still needs to
match the physical fence restrictions on alignment (only required for
gen2 and early gen3).
In commit 2889caa923 ("drm/i915: Eliminate lots of iterations over
the execobjects array"), the idea was to remove the second guessing and
only set the NEEDS_MAP flag when required. However, the entire check
for an unusable offset for fencing was removed and not just the
secondary check. I.e.
/* avoid costly ping-pong once a batch bo ended up non-mappable */
if (entry->flags & __EXEC_OBJECT_NEEDS_MAP &&
!i915_vma_is_map_and_fenceable(vma))
return !only_mappable_for_reloc(entry->flags);
was entirely removed as the ping-pong between execbuf passes was fixed,
but its primary purpose in forcing unaligned unfenced access to be
rebound was forgotten.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103502
Fixes: 2889caa923 ("drm/i915: Eliminate lots of iterations over the execobjects array")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171031103607.17836-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
There is no need check if PPGTT is disabled because that not possible
in CNL. Execlists and GuC submission modes rely on at least aliasing
PPGTT and even intel_sanitize_enable_ppgtt says: "We don't allow disabling
PPGTT for gen9+ as it's a requirement for execlists, the sole mechanism
available to submit work."
Suggested-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Michel Thierry <michel.thierry@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171027223207.7869-1-michel.thierry@intel.com
encoder->type isn't genreally safe around DDI ports, so let's
replace some uses in the audio code with the crtc state's
output_types instead.
Actually in these cases encoder->type would work since the DP
SST case is only relevant for VLV/CHV and encoder->type==DP
is a thing on those platforms. The DP MST cases would work
as well since MST encoder->type==DP_MST always. But I think
it's best to try and minimize the encoder->type use in general
to avoid showing a bad example to people.
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171030184654.17429-2-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Explicitly pass the crtc and connector states into the audio
code enable/disable hooks, and plumb them all the way down.
This gets rid of almost all crtc->config and encoder->crtc
uses. The one place where we still use them is
i915_audio_component_sync_audio_rate() since that gets called from
the audio driver and we don't have explicit states around then.
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171030184654.17429-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
To quote kbuild/makefiles.txt:
cc-disable-warning checks if gcc supports a given warning and returns
the commandline switch to disable it. This special function is needed,
because gcc 4.4 and later accept any unknown -Wno-* option and only
warn about it if there is another warning in the source file.
This is exactly what we were trying to achieve with cc-option -Wno-foo and
failed miserably.
Reported-by: kbuild-all@01.org
Fixes: 39bf4de89f ("drm/i915: Add -Wall -Wextra to our build, set warnings to full")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171030172927.18158-1-chris@chris-wilson.co.uk
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Eliminate the partially duplicated DDI readout code from MST, and
instead just call intel_ddi_get_config(). As a nice bonus we get
more cross checking as intel_ddi_get_config() will populate
output_types based on the actual mode of the DDI port.
Additonally intel_ddi_get_config() must be changed to get the crtc
from the passed in crtc state rather than from the encoder->crtc link.
encoder->crtc really shouldn't be used anyway.
v2: Rebased on BXT MST latency_optim fix
Make intel_ddi_clock_get() static
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171027193128.14483-7-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Pass an old crtc state to intel_ddi_post_disable() from the MST code.
Note that this crtc state won't necessaitly match the one that was
passed to intel_ddi_pre_enable() if the first stream to be enabled isn't
the last stream to be disabled. But this is fine since the states should
be identical in every important way. This does mean people frobbing
the DDI pre_enable/post_disable hooks have to pay attention in what
parts of the state they consult.
The alternative would be to inline the relevant code into the MST code.
That is actually what we used to do for pre_enable before
commit e081c8463a ("drm/i915: Remove duplicate DDI enabling logic
from MST path"). For post_disable we've always called the DDI hook.
v2: Pimp up the comments explaining the MST issues
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171027193128.14483-6-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
We should be using the DPLL hw state we got from the current crtc state
to determine the corresponding port clock frequency rather than getting
it via the current state programmed into the DPLL.
v2: Rebase due to intel_dpll_id changes
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171027193128.14483-5-ville.syrjala@linux.intel.com
encoder->port works for FDI, and it also works for MST (regardless of
whether we're dealing with the "fake" MST encoder, or mst->primary).
So let's eliminate intel_ddi_get_encoder_port().
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171027193128.14483-4-ville.syrjala@linux.intel.com
Currently the DDI encoder->type will change at runtime depending on
what kind of hotplugs we've processed. That's quite bad since we can't
really trust that that current value of encoder->type actually matches
the type of signal we're trying to drive through it.
Let's eliminate that problem by declaring that non-eDP DDI port will
always have the encoder type as INTEL_OUTPUT_DDI. This means the code
can no longer try to distinguish DP vs. HDMI based on encoder->type.
We'll leave eDP as INTEL_OUTPUT_EDP, since it'll never change and
there's a bunch of code that relies on that value to identify eDP
encoders.
We'll introduce a new encoder .compute_output_type() hook. This allows
us to compute the full output_types before any encoder .compute_config()
hooks get called, thus those hooks can rely on output_types being
correct, which is useful for cloning on oldr platforms. For now we'll
just look at the connector type and pick the correct mode based on that.
In the future the new hook could be used to implement dynamic switching
between LS and PCON modes for LSPCON.
v2: Fix BXT/GLK PPS explosion with DSI/MST encoders
v3: Avoid the PPS warn on pure HDMI/DVI DDI encoders by checking dp.output_reg
v4: Rebase
v5: Populate output_types in .get_config() rather than in the caller
v5: Split out populating output_types in .get_config() (Maarten)
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171027193128.14483-3-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Rather than having the caller of .get_config() set output_types based on
encoder->type, let's just have .get_config() itself populate
output_types. This way we are isolated from encoder->type, which won't
be useable for this purpose anyway soon (at least for DDI encoders).
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171027193128.14483-2-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Starting from version 204 VBT can specify the max TMDS clock we are
allowed to use with HDMI ports. Parse that information and take it
into account when filtering modes and computing a crtc state.
Also take the opportunity to sort the platform check if ladder
from new to old.
v2: Add defines for the values into intel_vbt_defs.h (Jani)
Don't fall back to 0 silently for unknown values (Jani)
Skip the debug print for the 0 case (Jani)
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171030145702.23662-1-ville.syrjala@linux.intel.com
Move the crtc state related 12bpc checks into hdmi_12bpc_possible()
since that one already examines other parts of the crtc state.
Note that we can drop the !force_dvi check since
crtc_state->has_hdmi_sink already accounts for that.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171026151405.30710-1-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
DP dongles may signal downstream HPD via short HPD pulses. Setting the
sink to DPMS off apparently kills the downstream HPD (at least on my
DP->VGA dongle), so skip the DPMS off for such dongles when we turn
off the port.
v2: Deal with DDI as well by moving the check into
intel_dp_sink_dpms() (Dhinakaran)
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Pablo <pablodebiase@nanalysis.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103472
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99114
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171027094523.9317-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Call the DDI .pre_pll_enable() hook from the MST code so that BXT gets
the correct lane latency optimal setting applied. And we obviously need
to compute the correct value, and read it out to keep the state checker
happy.
While at it drop the useless 'encoder' parameter to
bxt_ddi_phy_calc_lane_lat_optim_mask()
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171027134348.31190-1-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
