The display pixel clock has a requirement on certain newer platforms to
support M/N as (2/3) and the final D value calculated results in
underflow errors.
As the current implementation does not check for D value is within
the accepted range for a given M & N value. Update the logic to
calculate the final D value based on the range.
Fixes: 99cbd064b0 ("clk: qcom: Support display RCG clocks")
Signed-off-by: Taniya Das <tdas@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220227175536.3131-1-tdas@codeaurora.org
Add missing RPM-provided clocks on msm8998 and reorder the definitions
where needed.
Tested-by: Jami Kettunen <jami.kettunen@somainline.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Tested-by: Caleb Connolly <caleb@connolly.tech>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220226214126.21209-3-konrad.dybcio@somainline.org
XO and MSS_CFG were omitted when first adding the clocks for these SoCs.
Add them, and while at it, move the XO clock to the top of the definition
list, as ideally everyone should start using it sooner or later..
Fixes: b429784499 ("clk: qcom: smd: Add support for MSM8992/4 rpm clocks")
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220226214126.21209-2-konrad.dybcio@somainline.org
Add additional freq supported for the sdc table. The ops are changed to
the floor_ops to handle a freq request of 52kHz where we need to provide
a freq of 51.2kHz instead for stability reason.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Tested-by: Jonathan McDowell <noodles@earth.li>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220226135235.10051-11-ansuelsmth@gmail.com
Add clk_rcg_floor_ops for clock that can't provide a stable freq and
require to use a floor freq to provide the requested frequency.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Tested-by: Jonathan McDowell <noodles@earth.li>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220226135235.10051-10-ansuelsmth@gmail.com
Some clocks are used by other devices present on the SoC. For example
the gsbi4_h_clk is used by RPM and is if disabled cause the RPM to
reject any regulator change command. These clock should never be
disabled.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Tested-by: Jonathan McDowell <noodles@earth.li>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220226135235.10051-9-ansuelsmth@gmail.com
Ipq8065 SoC (an evolution of ipq8064 SoC) contains nss cores that can be
clocked to 800MHz. Add these missing freq to the gcc driver.
Set the freq_tbl for the ubi32_cores to the correct values based on the
machine compatible.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Tested-by: Jonathan McDowell <noodles@earth.li>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220226135235.10051-8-ansuelsmth@gmail.com
Use ARRAY_SIZE for num_parents instead of hardcoding the value.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Tested-by: Jonathan McDowell <noodles@earth.li>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220226135235.10051-7-ansuelsmth@gmail.com
Convert parent_names to parent_data to modernize the driver.
Where possible use parent_hws directly.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Tested-by: Jonathan McDowell <noodles@earth.li>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220226135235.10051-6-ansuelsmth@gmail.com
The Qualcomm SC8280XP platform exposes 5 clocks through the RPMh clock
controller. Add these, and the relates active-only variants, to the RPMh
clock controller driver.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20220223044516.3776637-2-bjorn.andersson@linaro.org
Use floor ops on SDCC1 APPS clock in order to round down selected clock
frequency and avoid overclocking SD/eMMC cards.
For example, currently HS200 cards were failling tuning as they were
actually being clocked at 384MHz instead of 192MHz.
This caused some boards to disable 1.8V I/O and force the eMMC into the
standard HS mode (50MHz) and that appeared to work despite the eMMC being
overclocked to 96Mhz in that case.
There was a previous commit to use floor ops on SDCC clocks, but it looks
to have only covered SDCC2 clock.
Fixes: 9607f6224b ("clk: qcom: ipq8074: add PCIE, USB and SDCC clocks")
Signed-off-by: Dirk Buchwalder <buchwalder@posteo.de>
Signed-off-by: Robert Marko <robimarko@gmail.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220210173100.505128-1-robimarko@gmail.com
Modify the existing MSM8974 multimedia clock controller driver to
support the MMCC found on MSM8226 based devices. This should allow most
multimedia device drivers to probe and control their clocks.
Signed-off-by: Bartosz Dudziak <bartosz.dudziak@snejp.pl>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220207185411.19118-3-bartosz.dudziak@snejp.pl
The "xo" fixed_factor clock is a leftover/hack from a time when we
couldn't make rpmhcc the root of all clocks. It is going to be removed
once all users of this clock are converted to use clocks specified
through the DTS. Replace internal usage of the xo clock with the cxo
(RPM_SMD_BB_CLK1) parent, specifying xo_board as a fallback.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211228045415.20543-17-dmitry.baryshkov@linaro.org
Convert the clock driver to specify parent data rather than parent
names, to actually bind using 'clock-names' specified in the DTS rather
than global clock names. Use parent_hws where possible to refer parent
clocks directly, skipping the lookup.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211228045415.20543-16-dmitry.baryshkov@linaro.org
Move clock parent tables down, after the GPLL declrataions, so that we
can use gpll hw clock fields in the next commit.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211228045415.20543-15-dmitry.baryshkov@linaro.org
In preparation of updating the msm8996 gcc driver, drop all unsupported
GPLL sources (gpll1/gpll1_early_div, gpll2/gpll2_early and gpll3).
Downstream kernel also does not provide support for these GPLL sources,
so it is safe to drop them.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211228045415.20543-14-dmitry.baryshkov@linaro.org
If all parents are specified as clk_hw, we can use parent_hws instead of
parent_data.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211228045415.20543-12-dmitry.baryshkov@linaro.org
Convert the clock driver to specify parent hws/data rather than parent
names, to actually bind using 'clock-names' specified in the DTS rather
than global clock names.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211228045415.20543-11-dmitry.baryshkov@linaro.org
Move clock parent tables down, after the PLL declrataions, so that we
can use pll hw clock fields in the next commit.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211228045415.20543-10-dmitry.baryshkov@linaro.org
The test clock isn't in the bindings and apparently it's not used by
anyone upstream. Remove it.
Suggested-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211228045415.20543-9-dmitry.baryshkov@linaro.org
If all parents are specified as clk_hw, we can use parent_hws instead of
parent_data.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211228045415.20543-7-dmitry.baryshkov@linaro.org
The test clock isn't in the bindings and apparently it's not used by
anyone upstream. Remove it.
Suggested-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211228045415.20543-6-dmitry.baryshkov@linaro.org
If all parents are specified as clk_hw, we can use parent_hws instead of
parent_data.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211228045415.20543-4-dmitry.baryshkov@linaro.org
The test clock isn't in the bindings and apparently it's not used by
anyone upstream. Remove it.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211228045415.20543-3-dmitry.baryshkov@linaro.org
Two clocks are still using parent_names, use parent_hws instead.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211228045415.20543-2-dmitry.baryshkov@linaro.org
they're mostly minor cleanups and some debugfs stuff. The real work
that's in here is the typical pile of clk driver updates and new SoC
support. Per usual (or maybe just recent trends), Qualcomm gains a
handful of SoC drivers additions and has the largest diffstat. After
that there are quite a few updates to the Allwinner (sunxi) drivers to
support modular drivers and Renesas is heavily updated to add more
support for various clks. Overall it looks pretty normal.
New Drivers:
- Add MDMA and BDMA clks to Ingenic JZ4760 and JZ4770
- MediaTek mt7986 SoC basic support
- Clock and reset driver for Toshiba Visconti SoCs
- Initial clock driver for the Exynos7885 SoC (Samsung Galaxy A8)
- Allwinner D1 clks
- Lan966x Generic Clock Controller driver and associated DT bindings
- Qualcomm SDX65, SM8450, and MSM8976 GCC clks
- Qualcomm SDX65 and SM8450 RPMh clks
Updates:
- Set suppress_bind_attrs to true for i.MX8ULP driver
- Switch from do_div to div64_ul for throughout all i.MX drivers
- Fix imx8mn_clko1_sels for i.MX8MN
- Remove unused IPG_AUDIO_ROOT from i.MX8MP
- Switch parent for audio_root_clk to audio ahb in i.MX8MP driver
- Removal of all remaining uses of __clk_lookup() in drivers/clk/samsung
- Refactoring of the CPU clocks registration to use common interface
- An update of the Exynos850 driver (support for more clock domains)
required by the E850-96 development board
- Prep for runtime PM and generic power domains on Tegra
- Support modular Allwinner clk drivers via platform bus
- Lan966x clock driver extended to support clock gating
- Add serial (SCI1), watchdog (WDT), timer (OSTM), SPI (RSPI), and
thermal (TSU) clocks and resets on Renesas RZ/G2L
- Rework SDHI clock handling in the Renesas R-Car Gen3 and RZ/G2 clock
drivers, and in the Renesas SDHI driver
- Make the Cortex-A55 (I) clock on Renesas RZ/G2L programmable
- Document support for the new Renesas R-Car S4-8 (R8A779F0) SoC
- Add support for the new Renesas R-Car S4-8 (R8A779F0) SoC
- Add GPU clock and resets on Renesas RZ/G2L
- Add clk-provider.h to various Qualcomm clk drivers
- devm version of clk_hw_register_gate()
- kerneldoc fixes in a couple drivers
-----BEGIN PGP SIGNATURE-----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=jB+l
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"We have a couple patches in the framework core this time around but
they're mostly minor cleanups and some debugfs stuff. The real work
that's in here is the typical pile of clk driver updates and new SoC
support.
Per usual (or maybe just recent trends), Qualcomm gains a handful of
SoC drivers additions and has the largest diffstat. After that there
are quite a few updates to the Allwinner (sunxi) drivers to support
modular drivers and Renesas is heavily updated to add more support for
various clks.
Overall it looks pretty normal.
New Drivers:
- Add MDMA and BDMA clks to Ingenic JZ4760 and JZ4770
- MediaTek mt7986 SoC basic support
- Clock and reset driver for Toshiba Visconti SoCs
- Initial clock driver for the Exynos7885 SoC (Samsung Galaxy A8)
- Allwinner D1 clks
- Lan966x Generic Clock Controller driver and associated DT bindings
- Qualcomm SDX65, SM8450, and MSM8976 GCC clks
- Qualcomm SDX65 and SM8450 RPMh clks
Updates:
- Set suppress_bind_attrs to true for i.MX8ULP driver
- Switch from do_div to div64_ul for throughout all i.MX drivers
- Fix imx8mn_clko1_sels for i.MX8MN
- Remove unused IPG_AUDIO_ROOT from i.MX8MP
- Switch parent for audio_root_clk to audio ahb in i.MX8MP driver
- Removal of all remaining uses of __clk_lookup() in
drivers/clk/samsung
- Refactoring of the CPU clocks registration to use common interface
- An update of the Exynos850 driver (support for more clock domains)
required by the E850-96 development board
- Prep for runtime PM and generic power domains on Tegra
- Support modular Allwinner clk drivers via platform bus
- Lan966x clock driver extended to support clock gating
- Add serial (SCI1), watchdog (WDT), timer (OSTM), SPI (RSPI), and
thermal (TSU) clocks and resets on Renesas RZ/G2L
- Rework SDHI clock handling in the Renesas R-Car Gen3 and RZ/G2
clock drivers, and in the Renesas SDHI driver
- Make the Cortex-A55 (I) clock on Renesas RZ/G2L programmable
- Document support for the new Renesas R-Car S4-8 (R8A779F0) SoC
- Add support for the new Renesas R-Car S4-8 (R8A779F0) SoC
- Add GPU clock and resets on Renesas RZ/G2L
- Add clk-provider.h to various Qualcomm clk drivers
- devm version of clk_hw_register_gate()
- kerneldoc fixes in a couple drivers"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (131 commits)
clk: visconti: Remove pointless NULL check in visconti_pll_add_lookup()
clk: mediatek: add mt7986 clock support
clk: mediatek: add mt7986 clock IDs
dt-bindings: clock: mediatek: document clk bindings for mediatek mt7986 SoC
clk: mediatek: clk-gate: Use regmap_{set/clear}_bits helpers
clk: mediatek: clk-gate: Shrink by adding clockgating bit check helper
clk: x86: Fix clk_gate_flags for RV_CLK_GATE
clk: x86: Use dynamic con_id string during clk registration
ACPI: APD: Add a fmw property clk-name
drivers: acpi: acpi_apd: Remove unused device property "is-rv"
x86: clk: clk-fch: Add support for newer family of AMD's SOC
clk: ingenic: Add MDMA and BDMA clocks
dt-bindings: clk/ingenic: Add MDMA and BDMA clocks
clk: bm1880: remove kfrees on static allocations
clk: Drop unused COMMON_CLK_STM32MP157_SCMI config
clk: st: clkgen-mux: search reg within node or parent
clk: st: clkgen-fsyn: search reg within node or parent
clk: Enable/Disable runtime PM for clk_summary
MAINTAINERS: Add entries for Toshiba Visconti PLL and clock controller
clk: visconti: Add support common clock driver and reset driver
...
This introduces bindings and drivers for the global clock controllers
found in SDX65, SM8450 and MSM8976, as well as RPMh clock support for
SDX65 and SM8450.
It cleans up the SMD RPM clock driver and it adds includes for
clk-provider.h throughout the clock providers that was lacking this.
-----BEGIN PGP SIGNATURE-----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=PGNc
-----END PGP SIGNATURE-----
Merge tag 'qcom-clk-for-5.17' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into clk-qcom
Pull qcom clk driver updates from Bjorn Andersson:
This introduces bindings and drivers for the global clock controllers
found in SDX65, SM8450 and MSM8976, as well as RPMh clock support for
SDX65 and SM8450.
It cleans up the SMD RPM clock driver and it adds includes for
clk-provider.h throughout the clock providers that was lacking this.
* tag 'qcom-clk-for-5.17' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (23 commits)
clk: qcom: turingcc-qcs404: explicitly include clk-provider.h
clk: qcom: q6sstop-qcs404: explicitly include clk-provider.h
clk: qcom: mmcc-apq8084: explicitly include clk-provider.h
clk: qcom: lpasscc-sdm845: explicitly include clk-provider.h
clk: qcom: lpasscc-sc7280: explicitly include clk-provider.h
clk: qcom: gcc-sm6350: explicitly include clk-provider.h
clk: qcom: gcc-msm8994: explicitly include clk-provider.h
clk: qcom: gcc-sm8350: explicitly include clk-provider.h
clk: qcom: Add MSM8976/56 Global Clock Controller (GCC) driver
dt-bindings: clk: qcom: Document MSM8976 Global Clock Controller
clk: qcom: Add clock driver for SM8450
clk: qcom: Add SDX65 GCC support
clk: qcom: Add LUCID_EVO PLL type for SDX65
dt-bindings: clock: Add SM8450 GCC clock bindings
dt-bindings: clock: Add SDX65 GCC clock bindings
clk: qcom: rpmh: add support for SM8450 rpmh clocks
dt-bindings: clock: Add RPMHCC bindings for SM8450
clk: qcom: smd-rpm: Drop binary value handling for buffered clock
clk: qcom: smd-rpm: Drop the use of struct rpm_cc
clk: qcom: smd-rpm: Drop MFD qcom-rpm reference
...
The gcc cfg noc lpass clock is required to be always enabled for the
LPASS core and audio drivers to be functional.
Fixes: a3cc092196 ("clk: qcom: Add Global Clock controller (GCC) driver for SC7280")
Signed-off-by: Taniya Das <tdas@codeaurora.org>
Link: https://lore.kernel.org/r/1640018638-19436-4-git-send-email-tdas@codeaurora.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
PLL poll for lock detection can take more than 100us for certain type
of Lucid PLLs and also the new PLLs types(Lucid EVO), thus update to 200us.
Signed-off-by: Taniya Das <tdas@codeaurora.org>
Link: https://lore.kernel.org/r/1640018638-19436-2-git-send-email-tdas@codeaurora.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Per Stephen, clk providers need to include clk-provider.h, so include in
this driver as well
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211215113803.620032-9-vkoul@kernel.org
Per Stephen, clk providers need to include clk-provider.h, so include in
this driver as well
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211215113803.620032-8-vkoul@kernel.org
Per Stephen, clk providers need to include clk-provider.h, so include in
this driver as well
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211215113803.620032-7-vkoul@kernel.org
Per Stephen, clk providers need to include clk-provider.h, so include in
this driver as well
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211215113803.620032-6-vkoul@kernel.org
Per Stephen, clk providers need to include clk-provider.h, so include in
this driver as well
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211215113803.620032-5-vkoul@kernel.org
Per Stephen, clk providers need to include clk-provider.h, so include in
this driver as well
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211215113803.620032-4-vkoul@kernel.org
Per Stephen, clk providers need to include clk-provider.h, so include in
this driver as well
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211215113803.620032-3-vkoul@kernel.org
Per Stephen, clk providers need to include clk-provider.h, so include in
this driver as well
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211215113803.620032-2-vkoul@kernel.org
Add support for the global clock controller found on MSM8956
and MSM8976 SoCs.
Since the multimedia clocks are actually in the GCC on these
SoCs, this will allow drivers to probe and control basically
all the required clocks.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Co-developed-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Co-developed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211208091036.132334-3-marijn.suijten@somainline.org
