In many cases, refresh rate is not exact integer. In such cases,
fraction was lost and it used to print, say, 59 in case of 59.94.
Now, capturing the fraction up to 2 decimal places.
Signed-off-by: Prashant Laddha <prladdha@cisco.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
We can simplify the code removing the if().
v4l2_ctr_new sets ctrls->elems to 1 when !ctrl->is_ptr.
Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
The last CVT standard introduced reduced blanking version 2 which is signaled by
a vsync of 8. Log this.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Added support for reduced blanking version 2 (RB v2) in cvt timings.
Standard specifies a fixed vsync pulse of 8 lines to indicate RB v2
timings. Vertical back porch is fixed at 6 lines and vertical front
porch is remainder of vertical blanking time.
For RB v2, horizontal blanking is fixed at 80 pixels. Horizontal sync
is fixed at 32. All horizontal timing counts (active pixels, front,
back porches) can be specified upto a precision of 1.
RB v2 allows for non standard aspect ratios. In RB v2 vsync does not
indicate aspect ratio. In absence of aspect ratio v4l2_detect_cvt()
cannot calculate image width from image height. Hence extending the
v4l2_detect_cvt() to pass image width in case of RB v2.
Signed-off-by: Prashant Laddha <prladdha@cisco.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Use kernel.h macro definition.
Thanks to Julia Lawall for Coccinelle scripting support.
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Pull LED subsystem updates from Bryan Wu:
"In this cycle, we finished to merge patches for LED Flash class
driver.
Other than that we have some bug fixes and new drivers for LED
controllers"
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds: (33 commits)
leds:lp55xx: fix firmware loading error
leds: fix max77693-led build errors
leds: fix aat1290 build errors
leds: aat1290: pass flags parameter to devm_gpiod_get
leds: ktd2692: pass flags parameter to devm_gpiod_get
drivers/leds: don't use module_init in non-modular leds-cobalt-raq.c
leds: aat1290: add support for V4L2 Flash sub-device
DT: aat1290: Document handling external strobe sources
leds: max77693: add support for V4L2 Flash sub-device
media: Add registration helpers for V4L2 flash sub-devices
v4l: async: Add a pointer to of_node to struct v4l2_subdev, match it
Documentation: leds: Add description of v4l2-flash sub-device
leds: add BCM6358 LED driver
leds: add DT binding for BCM6358 LED controller
leds: fix brightness changing when software blinking is active
Documentation: leds-lp5523: describe master fader attributes
leds: lp5523: add master_fader support
leds: leds-gpio: Allow compile test if !GPIOLIB
leds: leds-gpio: Add missing #include <linux/of.h>
gpiolib: Add missing dummies for the unified device properties interface
...
This patch adds helper functions for registering/unregistering
LED Flash class devices as V4L2 sub-devices. The functions should
be called from the LED subsystem device driver. In case the
support for V4L2 Flash sub-devices is disabled in the kernel
config the functions' empty versions will be used.
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Sakari Ailus <sakari.ailus@iki.fi>
Cc: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Bryan Wu <cooloney@gmail.com>
Commit f61bf13b6a ("[media] vb2: add allow_zero_bytesused flag to the
vb2_queue struct") added a WARN_ONCE to catch usage of a deprecated API
using a zero value for v4l2_buffer.bytesused.
However, the condition is checked incorrectly, as the v4L2_buffer
bytesused field is supposed to be ignored for multiplanar buffers. This
results in spurious warnings when using the multiplanar API.
Fix it by checking v4l2_buffer.bytesused for uniplanar buffers and
v4l2_plane.bytesused for multiplanar buffers.
Fixes: f61bf13b6a ("[media] vb2: add allow_zero_bytesused flag to the vb2_queue struct")
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Cc: stable@vger.kernel.org # for v4.0
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
V4L2 async sub-devices are currently matched (OF case) based on the struct
device_node pointer in struct device. LED devices may have more than one
LED, and in that case the OF node to match is not directly the device's
node, but a LED's node.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>
Signed-off-by: Bryan Wu <cooloney@gmail.com>
Extend detect_cvt/gtf API to indicate the format type (interlaced
or progressive). In case of interlaced, the vertical front and back
porch and vsync values for both (odd,even) fields are considered to
derive image height. Populated vsync, vertical front, back porch
values in bt timing structure for even and odd fields and updated
the flags appropriately.
Also modified the functions calling the detect_cvt/gtf(). As of now
these functions are calling detect_cvt/gtf() with interlaced flag
set to false.
Cc: Martin Bugge <marbugge@cisco.com>
Cc: Mats Randgaard <matrandg@cisco.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Prashant Laddha <prladdha@cisco.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
The v4l2_print_dv_timings() didn't log the interlaced format correctly. The timings
for the bottom field weren't logged and the fields per second value was half of what
it should have been.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Currently, in gtf hblank calculations, the rounding is used twice,
one at intermediate division and one at final state where hblank
is rounded to nearest multiple of twice cell granularity. This
error got introduced in 'commit d7ed5a3dda ("[media]
v4l2-dv-timings: fix rounding in hblank and hsync calculation"),
where it missed combining the rounding step. Correcting the same
in this patch.
Signed-off-by: Prashant Laddha <prladdha@cisco.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
This was never added for some reason, so add it now.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
If userspace passed the invalid buffer type 0 to the kernel, then the
kernel log would show 'type=(null)' since there was no string defined
for type 0. Fix this.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
This field was never cleared by the kernel making future extensions
hard to implement. Clear it now.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Current v4l2_of_parse_parallel_bus function attempts to parse the
DT properties for the parallel bus as well as BT656 bus.
If the pclk-sample property is defined for the BT656 bus, it is still
marked as a parallel bus.
Fix this by parsing the pclk after the bus_type is selected.
Only when hsync or vsync properties are specified, the bus_type should
be set to V4L2_MBUS_PARALLEL.
Signed-off-by: Nikhil Devshatwar <nikhil.nd@ti.com>
Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
In the past the transfer function was implied by the colorspace. However,
it is an independent entity in its own right. Add support for explicitly
choosing the transfer function.
This change will allow us to represent linear RGB (as is used by openGL), and
it will make it easier to work with decoded video material since most codecs
store the transfer function as a separate property as well.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
U8 and U16LE format human readable names were translated with string
containing emulated word. These strings were taken from msi2500 driver,
where those formats were emulated (after module parameter is set). But
on API correct names should be used, without any special case notes.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
16 bit greyscale format, structured in Big Endian. Such a format can be
converted into a PMN image just by adding a header.
Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
dma_map_sg returns the number of areas mapped by the hardware,
which could be different than the areas given as an input.
The output must be saved to nent.
Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Reviewed-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
dma_map_sg returns the number of areas mapped by the hardware,
which could be different than the areas given as an input.
The output must be saved to nent.
Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Reviewed-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
When sg_alloc_table_from_pages() does not fail it returns a sg_table
structure with nents and nents_orig initialized to the same value.
dma_map_sg returns the number of areas mapped by the hardware,
which could be different than the areas given as an input.
The output must be saved to nent.
The output of dma_map, should be used to transverse the scatter list.
dma_unmap_sg needs the value passed to dma_map_sg (nents_orig).
sg_free_tables uses also orig_nent.
This patch fix the file to follow this paradigm.
Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Reviewed-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
vb2_buffer_done() already allows STATE_QUEUED, but currently only when not
streaming. It is useful to allow it while streaming as well, as this makes
it possible for drivers to requeue buffers while waiting for a stable
video signal.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
The intermediate calculation in the expression for hblank can exceed
32 bit signed range. This overflow can lead to negative values for
hblank. Typecasting intermediate variable to higher precision.
Cc: Martin Bugge <marbugge@cisco.com>
Signed-off-by: Prashant Laddha <prladdha@cisco.com>
[hans.verkuil@cisco.com: made the denominator u32, since that's what div_u64 expects]
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
If the last buffer was dequeued from a capture queue, let poll return
immediately and let DQBUF return -EPIPE to signal there will no more
buffers to dequeue until STREAMOFF.
The driver signals the last buffer by setting the V4L2_BUF_FLAG_LAST.
To reenable dequeuing on the capture queue, the driver must explicitly
call vb2_clear_last_buffer_queued. The last buffer queued flag is
cleared automatically during STREAMOFF.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Currently vb2 core acquires mmap_sem just around call to
__qbuf_userptr(). However since commit f035eb4e97 (videobuf2: fix
lockdep warning) it isn't necessary to acquire it so early as we no
longer have to drop queue mutex before acquiring mmap_sem. So push
acquisition of mmap_sem down into .get_userptr and .put_userptr memops
so that the semaphore is acquired for a shorter time and it is clearer
what it is needed for.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
This change will not change timing calculation. In CVT generator
spreadsheet the nominal value of hsync (as a percentage of line)
is 8 percent.
Cc: Martin Bugge <marbugge@cisco.com>
Signed-off-by: Prashant Laddha <prladdha@cisco.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Wrong values of hfreq and image height can lead to strange timings.
Avoid timing calculations for such values.
Suggested By: Martin Bugge <marbugge@cisco.com>
Cc: Martin Bugge <marbugge@cisco.com>
Signed-off-by: Prashant Laddha <prladdha@cisco.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Changed the rounding calculation for hblank and hsync to match it
to equations in cvt and gtf standards.
In cvt calculation, hsync needs to be rounded down.
In gtf calculations, hblank needs to be rounded to nearest multiple
of twice the cell granularity and hsync needs to be rounded to the
nearest multiple of cell granularity.
Cc: Martin Bugge <marbugge@cisco.com>
Signed-off-by: Prashant Laddha <prladdha@cisco.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Changed the rounding offsets used in vsync_bp calculation in cvt and
gtf timings. The results for vsync_bp should now match with results
from timing generator spreadsheets for cvt and gtf standards.
In the vsync_bp calculation for cvt, always round down the value of
(CVT_MIN_VSYNC_BP / h_period_est) and then add 1. It thus, reflects
the equation used in timing generator spreadsheet. Using 1999999 as
rounding offset, could pontentially lead to bumping up the vsync_bp
value by extra 1.
In the vsync_bp calculations for gtf, instead of round up or round
down, round the (CVT_MIN_VSYNC_BP / h_period_est) to the nearest
integer.
Thanks to Martin Bugge <marbugge@cisco.com> for validating with
standards and suggestions on equations.
Cc: Martin Bugge <marbugge@cisco.com>
Signed-off-by: Prashant Laddha <prladdha@cisco.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
If NO_DMA=y:
ERROR: "dma_unmap_sg" [drivers/media/v4l2-core/videobuf2-dma-sg.ko] undefined!
ERROR: "dma_map_sg" [drivers/media/v4l2-core/videobuf2-dma-sg.ko] undefined!
ERROR: "dma_sync_sg_for_cpu" [drivers/media/v4l2-core/videobuf2-dma-sg.ko] undefined!
VIDEOBUF2_DMA_SG cannot be enabled manually by the user, it's always
selected automatically by drivers that need it. Several of those drivers
already have an explicit dependency on HAS_DMA.
Make VIDEOBUF2_DMA_SG depend on HAS_DMA. This makes it easier to find
drivers that select VIDEOBUF2_DMA_SG without depending on HAS_DMA, as
Kconfig will give a warning.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
The changeset ba3002045f added a logic at the core to fill
the format description, however, a break is missing on one of
the formats, as reported by smatch:
drivers/media/v4l2-core/v4l2-ioctl.c:1211 v4l_fill_fmtdesc() warn: missing break? reassigning 'descr'
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
The descriptions used in drivers for the formats returned with ENUM_FMT
are all over the place.
So instead allow the core to fill them in if the driver didn't. This
allows drivers to drop the description and flags.
Based on an earlier patch from Philipp Zabel:
http://comments.gmane.org/gmane.linux.drivers.video-input-infrastructure/81411
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
The link-frequencies property is a variable length array of link frequencies
in an endpoint. The array is needed by an increasing number of drivers, so
it makes sense to add it to struct v4l2_of_endpoint.
However, the length of the array is variable and the size of struct
v4l2_of_endpoint is fixed since it is allocated by the caller. The options
here are
1. to define a fixed maximum limit of link frequencies that has to be the
global maximum of all boards. This is seen as problematic since the maximum
could be largish, and everyone hitting the problem would need to submit a
patch to fix it, or
2. parse the property in every driver. This doesn't sound appealing as two
of the three implementations submitted to linux-media were wrong, and one of
them was even merged before this was noticed, or
3. change the interface so that allocating and releasing memory according to
the size of the array is possible. This is what the patch does.
v4l2_of_alloc_parse_endpoint() is just like v4l2_of_parse_endpoint(), but it
will allocate the memory resources needed to store struct v4l2_of_endpoint
and the additional arrays pointed to by this struct. A corresponding release
function v4l2_of_free_endpoint() is provided to release the memory allocated
by v4l2_of_alloc_parse_endpoint().
In addition to this, the link-frequencies property is parsed as well, and
the result is stored to struct v4l2_of_endpoint field link_frequencies.
Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Tested-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Zero the entire struct starting from bus_type. As more fields are added, no
changes will be needed in the function to reset their value explicitly.
Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
- correction of copy-paste stupidity while doing the cleanup
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=ULmO
-----END PGP SIGNATURE-----
Merge tag 'dma-buf-for-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/sumits/dma-buf
Pull dma-buf updates from Sumit Semwal:
"Minor cleanup only; this could've gone in for the 4.0 merge window,
but for a copy-paste stupidity from me.
It has been in the for-next since then, and no issues reported.
- cleanup of dma_buf_export()
- correction of copy-paste stupidity while doing the cleanup"
* tag 'dma-buf-for-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/sumits/dma-buf:
staging: android: ion: fix wrong init of dma_buf_export_info
dma-buf: cleanup dma_buf_export() to make it easily extensible
My 'allmodconfig' build is _almost_ free of warnings, and most of the
remaining ones are for legacy drivers that just do bad things that I
can't find it in my black heart to care too much about. But this one
was just annoying me:
drivers/media/v4l2-core/videobuf2-core.c:3256:26: warning: unused variable ‘fileio’ [-Wunused-variable]
because commit 0e66100637 ("[media] vb2: fix 'UNBALANCED' warnings
when calling vb2_thread_stop()") removed all users of 'fileio' and
instead calls "__vb2_cleanup_fileio(q)" to clean up q->fileio. But the
now unused 'fileio' variable was left around.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
At present, dma_buf_export() takes a series of parameters, which
makes it difficult to add any new parameters for exporters, if required.
Make it simpler by moving all these parameters into a struct, and pass
the struct * as parameter to dma_buf_export().
While at it, unite dma_buf_export_named() with dma_buf_export(), and
change all callers accordingly.
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Acked-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Acked-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
* patchwork: (404 commits)
[media] uvcvideo: add support for VIDIOC_QUERY_EXT_CTRL
[media] uvcvideo: fix cropcap v4l2-compliance failure
[media] media: omap3isp: remove unused clkdev
[media] coda: Add tracing support
[media] coda: drop dma_sync_single_for_device in coda_bitstream_queue
[media] coda: fix fill bitstream errors in nonstreaming case
[media] coda: call SEQ_END when the first queue is stopped
[media] coda: fail to start streaming if userspace set invalid formats
[media] coda: remove duplicate error messages for buffer allocations
[media] coda: move parameter buffer in together with context buffer allocation
[media] coda: allocate bitstream buffer from REQBUFS, size depends on the format
[media] coda: allocate per-context buffers from REQBUFS
[media] coda: use strlcpy instead of snprintf
[media] coda: bitstream payload is unsigned
[media] coda: fix double call to debugfs_remove
[media] coda: check kasprintf return value in coda_open
[media] coda: bitrate can only be set in kbps steps
[media] v4l2-mem2mem: no need to initialize b in v4l2_m2m_next_buf and v4l2_m2m_buf_remove
[media] s5p-mfc: set allow_zero_bytesused flag for vb2_queue_init
[media] coda: set allow_zero_bytesused flag for vb2_queue_init
...
The first time b is used, it is assigned to the first element of the rdy_queue
list. There is no need to set it to NULL before.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
The vb2: fix bytesused == 0 handling (8a75ffb) patch changed the behavior
of __fill_vb2_buffer function, so that if bytesused is 0 it is set to the
size of the buffer. However, bytesused set to 0 is used by older codec
drivers as as indication used to mark the end of stream.
To keep backward compatibility, this patch adds a flag passed to the
vb2_queue_init function - allow_zero_bytesused. If the flag is set upon
initialization of the queue, the videobuf2 keeps the value of bytesused
intact in the OUTPUT queue and passes it to the driver.
Reported-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Kamil Debski <k.debski@samsung.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
This patch splits the io_flags member of vb2_queue into a bit field.
Instead of an enum with flags separate bit fields were introduced.
Signed-off-by: Kamil Debski <k.debski@samsung.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Please revert this patch: vm_area_cachep is not exported, so you cannot use
this in a module.
This reverts commit 5ed1c328ea.
Reported-by: Hans Verkuil <hverkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
The slab for vm_area_struct which is vm_area_cachep is already prepared
for the general use. Instead of kmalloc() for the vma copy for userptr,
allocation from vm_area_cachep is more beneficial.
CC: Hans Verkuil <hans.verkuil@cisco.com>
CC: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Cho KyongHo <pullip.cho@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
The media_entity_put() function tests whether its argument is NULL and then
returns immediately. Thus the test around the call is not needed.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Add support for the new flag to v4l2_print_dv_timings().
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Any control with V4L2_CTRL_FLAG_EXECUTE_ON_WRITE set should return
changed == true in cluster_changed.
This forces the value to be passed to the driver even if it has not
changed.
Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Any control that sets FLAG_WRITE_ONLY should OR it with
FLAG_EXECUTE_ON_WRITE.
So we can keep the current meaning of WRITE_ONLY.
Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Volatile controls should not generate CH_VALUE events.
Set has_changed to false to prevent this happening.
Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
