And do so if the skb doesn't have enough space for the payload.
This is a preparation for the next patch.
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds a generic infrastructure to offload TLS crypto to a
network device. It enables the kernel TLS socket to skip encryption
and authentication operations on the transmit side of the data path.
Leaving those computationally expensive operations to the NIC.
The NIC offload infrastructure builds TLS records and pushes them to
the TCP layer just like the SW KTLS implementation and using the same
API.
TCP segmentation is mostly unaffected. Currently the only exception is
that we prevent mixed SKBs where only part of the payload requires
offload. In the future we are likely to add a similar restriction
following a change cipher spec record.
The notable differences between SW KTLS and NIC offloaded TLS
implementations are as follows:
1. The offloaded implementation builds "plaintext TLS record", those
records contain plaintext instead of ciphertext and place holder bytes
instead of authentication tags.
2. The offloaded implementation maintains a mapping from TCP sequence
number to TLS records. Thus given a TCP SKB sent from a NIC offloaded
TLS socket, we can use the tls NIC offload infrastructure to obtain
enough context to encrypt the payload of the SKB.
A TLS record is released when the last byte of the record is ack'ed,
this is done through the new icsk_clean_acked callback.
The infrastructure should be extendable to support various NIC offload
implementations. However it is currently written with the
implementation below in mind:
The NIC assumes that packets from each offloaded stream are sent as
plaintext and in-order. It keeps track of the TLS records in the TCP
stream. When a packet marked for offload is transmitted, the NIC
encrypts the payload in-place and puts authentication tags in the
relevant place holders.
The responsibility for handling out-of-order packets (i.e. TCP
retransmission, qdisc drops) falls on the netdev driver.
The netdev driver keeps track of the expected TCP SN from the NIC's
perspective. If the next packet to transmit matches the expected TCP
SN, the driver advances the expected TCP SN, and transmits the packet
with TLS offload indication.
If the next packet to transmit does not match the expected TCP SN. The
driver calls the TLS layer to obtain the TLS record that includes the
TCP of the packet for transmission. Using this TLS record, the driver
posts a work entry on the transmit queue to reconstruct the NIC TLS
state required for the offload of the out-of-order packet. It updates
the expected TCP SN accordingly and transmits the now in-order packet.
The same queue is used for packet transmission and TLS context
reconstruction to avoid the need for flushing the transmit queue before
issuing the context reconstruction request.
Signed-off-by: Ilya Lesokhin <ilyal@mellanox.com>
Signed-off-by: Boris Pismenny <borisp@mellanox.com>
Signed-off-by: Aviad Yehezkel <aviadye@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In TLS inline crypto, we can have one direction in software
and another in hardware. Thus, we split the TLS configuration to separate
structures for receive and transmit.
Signed-off-by: Boris Pismenny <borisp@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds a netdev feature to configure TLS TX offloads.
Signed-off-by: Ilya Lesokhin <ilyal@mellanox.com>
Signed-off-by: Boris Pismenny <borisp@mellanox.com>
Signed-off-by: Aviad Yehezkel <aviadye@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
With socket dependent offloads we rely on the netdev to transform
the transmitted packets before sending them to the wire.
When a packet from an offloaded socket is rerouted to a different
device we need to detect it and do the transformation in software.
Signed-off-by: Ilya Lesokhin <ilyal@mellanox.com>
Signed-off-by: Boris Pismenny <borisp@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
copy_skb_header is renamed to skb_copy_header and
exported. Exposing this function give more flexibility
in copying SKBs.
skb_copy and skb_copy_expand do not give enough control
over which parts are copied.
Signed-off-by: Ilya Lesokhin <ilyal@mellanox.com>
Signed-off-by: Boris Pismenny <borisp@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Called when a TCP segment is acknowledged.
Could be used by application protocols who hold additional
metadata associated with the stream data.
This is required by TLS device offload to release
metadata associated with acknowledged TLS records.
Signed-off-by: Ilya Lesokhin <ilyal@mellanox.com>
Signed-off-by: Boris Pismenny <borisp@mellanox.com>
Signed-off-by: Aviad Yehezkel <aviadye@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The comment of vti6_ioctl() is wrong. which use vti6_tnl_ioctl
instead of vti6_ioctl.
Signed-off-by: Sun Lianwen <sunlw.fnst@cn.fujitsu.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Add a couple new functions to allow querying FDB and vlan settings of a
bridge.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The seg6_make_flowlabel() is used by seg6_do_srh_encap() to compute the
flowlabel from a given skb. It relies on skb_get_hash() which eventually
calls __skb_flow_dissect() to extract the flow_keys struct values from
the skb.
In case of IPv4 traffic, calling seg6_make_flowlabel() after skb_push(),
skb_reset_network_header(), and skb_mac_header_rebuild() will results in
flow_keys struct of all key values set to zero.
This patch calls seg6_make_flowlabel() before resetting the headers of skb
to get the right key values.
Extracted Key values are based on the type inner packet as follows:
1) IPv6 traffic: src_IP, dst_IP, L4 proto, and flowlabel of inner packet.
2) IPv4 traffic: src_IP, dst_IP, L4 proto, src_port, and dst_port
3) L2 traffic: depends on what kind of traffic carried into the L2
frame. IPv6 and IPv4 traffic works as discussed 1) and 2)
Here a hex_dump of struct flow_keys for IPv4 and IPv6 traffic
10.100.1.100: 47302 > 30.0.0.2: 5001
00000000: 14 00 02 00 00 00 00 00 08 00 11 00 00 00 00 00
00000010: 00 00 00 00 00 00 00 00 13 89 b8 c6 1e 00 00 02
00000020: 0a 64 01 64
fc00:a1:a > b2::2
00000000: 28 00 03 00 00 00 00 00 86 dd 11 00 99 f9 02 00
00000010: 00 00 00 00 00 00 00 00 00 00 00 00 00 b2 00 00
00000020: 00 00 00 00 00 00 00 00 00 00 00 02 fc 00 00 a1
00000030: 00 00 00 00 00 00 00 00 00 00 00 0a
Signed-off-by: Ahmed Abdelsalam <amsalam20@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently the truncated bit is set only when the mirrored packet
is larger than mtu. For certain cases, the packet might already
been truncated before sending to the erspan tunnel. In this case,
the patch detect whether the IP header's total length is larger
than the actual skb->len. If true, this indicated that the
mirrored packet is truncated and set the erspan truncate bit.
I tested the patch using bpf_skb_change_tail helper function to
shrink the packet size and send to erspan tunnel.
Reported-by: Xiaoyan Jin <xiaoyanj@vmware.com>
Signed-off-by: William Tu <u9012063@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We have about 53 netdev_features_t bits defined and counting, add a
build time check to catch when an u64 type will not be enough and we
will have to convert that to a bitmap. This is done in
register_netdevice() for convenience.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
I am dropping the export of __skb_tx_hash as after my patches nobody is
using it outside of the net/core/dev.c file. In addition I am renaming and
repurposing it to just be a static declaration of skb_tx_hash since that
was the only user for it at this point. By doing this the compiler can
inline it into __netdev_pick_tx as that will improve performance.
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When adding tcp mmap() implementation, I forgot that socket lock
had to be taken before current->mm->mmap_sem. syzbot eventually caught
the bug.
Since we can not lock the socket in tcp mmap() handler we have to
split the operation in two phases.
1) mmap() on a tcp socket simply reserves VMA space, and nothing else.
This operation does not involve any TCP locking.
2) getsockopt(fd, IPPROTO_TCP, TCP_ZEROCOPY_RECEIVE, ...) implements
the transfert of pages from skbs to one VMA.
This operation only uses down_read(¤t->mm->mmap_sem) after
holding TCP lock, thus solving the lockdep issue.
This new implementation was suggested by Andy Lutomirski with great details.
Benefits are :
- Better scalability, in case multiple threads reuse VMAS
(without mmap()/munmap() calls) since mmap_sem wont be write locked.
- Better error recovery.
The previous mmap() model had to provide the expected size of the
mapping. If for some reason one part could not be mapped (partial MSS),
the whole operation had to be aborted.
With the tcp_zerocopy_receive struct, kernel can report how
many bytes were successfuly mapped, and how many bytes should
be read to skip the problematic sequence.
- No more memory allocation to hold an array of page pointers.
16 MB mappings needed 32 KB for this array, potentially using vmalloc() :/
- skbs are freed while mmap_sem has been released
Following patch makes the change in tcp_mmap tool to demonstrate
one possible use of mmap() and setsockopt(... TCP_ZEROCOPY_RECEIVE ...)
Note that memcg might require additional changes.
Fixes: 93ab6cc691 ("tcp: implement mmap() for zero copy receive")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Suggested-by: Andy Lutomirski <luto@kernel.org>
Cc: linux-mm@kvack.org
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When we set a bond slave's master to bridge via ioctl, we only check
the IFF_BRIDGE_PORT flag. Although we will find the slave's real master
at netdev_master_upper_dev_link() later, it already does some settings
and allocates some resources. It would be better to return as early
as possible.
v1 -> v2:
use netdev_master_upper_dev_get() instead of netdev_has_any_upper_dev()
to check if we have a master, because not all upper devs are masters,
e.g. vlan device.
Reported-by: syzbot+de73361ee4971b6e6f75@syzkaller.appspotmail.com
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
UDP GSO needs to export __udp_gso_segment to call it from ipv6.
I accidentally exported static ipv4 function __udp4_gso_segment.
Remove that EXPORT_SYMBOL_GPL.
Fixes: ee80d1ebe5 ("udp: add udp gso")
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This implements a misc character device named "qrtr-tun" for the purpose
of allowing user space applications to implement endpoints in the qrtr
network.
This allows more advanced (and dynamic) testing of the qrtr code as well
as opens up the ability of tunneling qrtr over a network or USB link.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
RFC 6458 Section 8.1.16 says that setting MAXSEG as 0 means that the user
is not limiting it, and not that it should set to the *current* maximum,
as we are doing.
This patch thus allow setting it as 0, effectively removing the user
limit.
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When setting SCTP_MAXSEG sock option, it should consider which kind of
data chunk is being used if the asoc is already available, so that the
limit better reflect reality.
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
sctp_sendmsg() could trigger PMTU updates even when PMTU_DISABLED was
set, as pmtu_pending could be set unconditionally during icmp handling
if the socket was in use by the application.
This patch fixes it by checking for PMTU_DISABLED when handling such
deferred updates.
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
sctp_transport_route currently is very similar to sctp_transport_pmtu plus
a few other bits.
This patch reuses sctp_transport_pmtu in sctp_transport_route and removes
the duplicated code.
Also, as all calls to sctp_transport_route were forcing the dst release
before calling it, let's just include such release too.
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We are now keeping the MTU information synced between asoc, transport
and dst, which makes the check at sctp_packet_config() not needed
anymore. As it was the sole caller to this function, lets remove it.
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Which makes sure that the MTU respects the minimum value of
SCTP_DEFAULT_MINSEGMENT and that it is correctly aligned.
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
and avoid the open-coded versions of it.
Now sctp_datamsg_from_user can just re-use asoc->frag_point as it will
always be updated.
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When given a MTU, this function calculates how much payload we can carry
on it. Without a MTU, it calculates the amount of header overhead we
have.
So that when we have extra overhead, like the one added for IP options
on SELinux patches, it is easier to handle it.
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
All changes to asoc PMTU should now go through this wrapper, making it
easier to track them and to do other actions upon it.
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
As noticed by Xin Long, the if() here is always true as PMTU can never
be 0.
Reported-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There was only one case that sctp_assoc_add_peer couldn't handle, which
is when SPP_PMTUD_DISABLE is set and pathmtu not initialized.
So add this situation to sctp_transport_route and reuse what was
already in there.
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In tcp_select_initial_window(), we only set rcv_wnd to
tcp_default_init_rwnd() if current mss > (1 << wscale). Otherwise,
rcv_wnd is kept at the full receive space of the socket which is a
value way larger than tcp_default_init_rwnd().
With larger initial rcv_wnd value, receive buffer autotuning logic
takes longer to kick in and increase the receive buffer.
In a TCP throughput test where receiver has rmem[2] set to 125MB
(wscale is 11), we see the connection gets recvbuf limited at the
beginning of the connection and gets less throughput overall.
Signed-off-by: Wei Wang <weiwan@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If sockopt TCP_DEFER_ACCEPT is set, the accept is delayed till
data is available.
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Setting sockopt TCP_NODELAY or resetting sockopt TCP_CORK
triggers data transfer.
For a corked SMC socket RDMA writes are deferred, if there is
still sufficient send buffer space available.
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Several TCP sockopts do not work for SMC. One example are the
TCP_FASTOPEN sockopts, since SMC-connection setup is based on the TCP
three-way-handshake.
If the SMC socket is still in state SMC_INIT, such sockopts trigger
fallback to TCP. Otherwise an error is returned.
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The struct smc_cdc_msg must be defined as packed so the
size is 44 bytes.
And change the structure size check so sizeof is checked.
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
messenger layer, marked for stable.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABCAAGBQJa4y7RAAoJEEp/3jgCEfOLaOAH/jLawBpY9He0fwyRoDctOZAb
KwZyFfCl7XnThJiejMt864cJ0vjU6iufE+3kxFqUWEhOH4nhXYWNdNJ3Tgn1satY
uwG5PJGYy+El0xL6C7IYeasy+y8wbtvYdjRqYEAnEzTH2xQ99GsN1QPMjySAacvQ
ONz/11Mdj6C8bLfIsth4jcCkkC9TqlWYmyCds4GADN+a/Nw6vwT+ew88kgVDhBcD
JUjFsBpxe+WtR7rKUhldd+lwngiJ3D4YCKLogJgaYAwVBJoK3lbdldd9FH9/JGyf
67Y2j/oOTPWCWnZuXtUw7dEvTCuW5QSMQJyXB1+vndsN1Y3mfWwlVMw1wREtQXs=
=BShN
-----END PGP SIGNATURE-----
Merge tag 'ceph-for-4.17-rc3' of git://github.com/ceph/ceph-client
Pull ceph fixes from Ilya Dryomov:
"A CephFS quota follow-up and fixes for two older issues in the
messenger layer, marked for stable"
* tag 'ceph-for-4.17-rc3' of git://github.com/ceph/ceph-client:
libceph: validate con->state at the top of try_write()
libceph: reschedule a tick in finish_hunting()
libceph: un-backoff on tick when we have a authenticated session
ceph: check if mds create snaprealm when setting quota
kbuild test robot says:
>coccinelle warnings: (new ones prefixed by >>)
>>> net/core/dev.c:1588:2-3: Unneeded semicolon
So, let's remove it.
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When processing a duplicate cookie-echo chunk, sctp moves the new
temp asoc's stream out/in into the old asoc, and later frees this
new temp asoc.
But now after this move, the new temp asoc's stream->outcnt is not
cleared while stream->out is set to NULL, which would cause a same
crash as the one fixed in Commit 79d0895140 ("sctp: fix error
path in sctp_stream_init") when freeing this asoc later.
This fix is to clear this outcnt in sctp_stream_update.
Fixes: f952be79ce ("sctp: introduce struct sctp_stream_out_ext")
Reported-by: Jianwen Ji <jiji@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since sctp ipv6 socket also supports v4 addrs, it's possible to
compare two v4 addrs in pf v6 .cmp_addr, sctp_inet6_cmp_addr.
However after Commit 1071ec9d45 ("sctp: do not check port in
sctp_inet6_cmp_addr"), it no longer calls af1->cmp_addr, which
in this case is sctp_v4_cmp_addr, but calls __sctp_v6_cmp_addr
where it handles them as two v6 addrs. It would cause a out of
bounds crash.
syzbot found this crash when trying to bind two v4 addrs to a
v6 socket.
This patch fixes it by adding the process for two v4 addrs in
sctp_inet6_cmp_addr.
Fixes: 1071ec9d45 ("sctp: do not check port in sctp_inet6_cmp_addr")
Reported-by: syzbot+cd494c1dd681d4d93ebb@syzkaller.appspotmail.com
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use hlist_entry_safe() instead of open-coding it.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Implement the same type of ethtool diversion that we have for
ETH_SS_STATS and make it work with ETH_SS_PHY_STATS. This allows
providing PHY level statistics for CPU ports that are directly
connecting to a PHY device.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In preparation for having more call sites attempting to obtain a
reference against a PHY device corresponding to a particular port,
introduce a helper function for that purpose.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Up until now we largely assumed that we were interested in ETH_SS_STATS
type of strings for all ethtool operations, this is about to change with
the introduction of additional string sets, e.g: ETH_SS_PHY_STATS.
Update all functions to take an appropriate stringset argument and act
on it when it is different than ETH_SS_STATS for now.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This is completely redundant with what netdev_set_default_ethtool_ops()
does, we are always guaranteed to have a valid dev->ethtool_ops pointer,
however, within that structure, not all function calls may be populated,
so we still have to check them individually.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a new callback: get_ethtool_phy_stats() which allows network device
drivers not making use of the PHY library to return PHY statistics.
Update ethtool_get_phy_stats(), __ethtool_get_sset_count() and
__ethtool_get_strings() accordingly to interogate the network device
about ETH_SS_PHY_STATS.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In order to make it possible for network device drivers that do not
necessarily have a phy_device attached, but still report PHY statistics,
have a preliminary refactoring consisting in creating helper functions
that encapsulate the PHY device driver knowledge within PHYLIB.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The TCP repair sequence of operation is to first set the socket in
repair mode, then inject the TCP stats into the socket with repair
socket options, then call connect() to re-activate the socket. The
connect syscall simply returns and set state to ESTABLISHED
mode. As a result Fast Open is meaningless for TCP repair.
However allowing sendto() system call with MSG_FASTOPEN flag half-way
during the repair operation could unexpectedly cause data to be
sent, before the operation finishes changing the internal TCP stats
(e.g. MSS). This in turn triggers TCP warnings on inconsistent
packet accounting.
The fix is to simply disallow Fast Open operation once the socket
is in the repair mode.
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The 'pppol2tp' procfs and 'l2tp/tunnels' debugfs files handle reference
counting of sessions differently than for tunnels.
For consistency, use the same mechanism for handling both sessions and
tunnels. That is, drop the reference on the previous session just
before looking up the next one (rather than in .show()). If necessary
(if dump stops before *_next_session() returns NULL), drop the last
reference in .stop().
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
After the introduction of a 128-bit node identity it may be difficult
for a user to correlate between this identity and the generated node
hash address.
We now try to make this easier by introducing a new ioctl() call for
fetching a node identity by using the hash value as key. This will
be particularly useful when we extend some of the commands in the
'tipc' tool, but we also expect regular user applications to need
this feature.
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 36a50a989e ("tipc: fix infinite loop when dumping link monitor
summary") intended to fix a problem with user tool looping when max
number of bearers are enabled.
Unfortunately, the wrong version of the commit was posted, so the
problem was not solved at all.
This commit adds the missing part.
Fixes: 36a50a989e ("tipc: fix infinite loop when dumping link monitor summary")
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann says:
====================
pull-request: bpf-next 2018-04-27
The following pull-request contains BPF updates for your *net-next* tree.
The main changes are:
1) Add extensive BPF helper description into include/uapi/linux/bpf.h
and a new script bpf_helpers_doc.py which allows for generating a
man page out of it. Thus, every helper in BPF now comes with proper
function signature, detailed description and return code explanation,
from Quentin.
2) Migrate the BPF collect metadata tunnel tests from BPF samples over
to the BPF selftests and further extend them with v6 vxlan, geneve
and ipip tests, simplify the ipip tests, improve documentation and
convert to bpf_ntoh*() / bpf_hton*() api, from William.
3) Currently, helpers that expect ARG_PTR_TO_MAP_{KEY,VALUE} can only
access stack and packet memory. Extend this to allow such helpers
to also use map values, which enabled use cases where value from
a first lookup can be directly used as a key for a second lookup,
from Paul.
4) Add a new helper bpf_skb_get_xfrm_state() for tc BPF programs in
order to retrieve XFRM state information containing SPI, peer
address and reqid values, from Eyal.
5) Various optimizations in nfp driver's BPF JIT in order to turn ADD
and SUB instructions with negative immediate into the opposite
operation with a positive immediate such that nfp can better fit
small immediates into instructions. Savings in instruction count
up to 4% have been observed, from Jakub.
6) Add the BPF prog's gpl_compatible flag to struct bpf_prog_info
and add support for dumping this through bpftool, from Jiri.
7) Move the BPF sockmap samples over into BPF selftests instead since
sockmap was rather a series of tests than sample anyway and this way
this can be run from automated bots, from John.
8) Follow-up fix for bpf_adjust_tail() helper in order to make it work
with generic XDP, from Nikita.
9) Some follow-up cleanups to BTF, namely, removing unused defines from
BTF uapi header and renaming 'name' struct btf_* members into name_off
to make it more clear they are offsets into string section, from Martin.
10) Remove test_sock_addr from TEST_GEN_PROGS in BPF selftests since
not run directly but invoked from test_sock_addr.sh, from Yonghong.
11) Remove redundant ret assignment in sample BPF loader, from Wang.
12) Add couple of missing files to BPF selftest's gitignore, from Anders.
There are two trivial merge conflicts while pulling:
1) Remove samples/sockmap/Makefile since all sockmap tests have been
moved to selftests.
2) Add both hunks from tools/testing/selftests/bpf/.gitignore to the
file since git should ignore all of them.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Similarly, tbl->entries is not initialized after kmalloc(),
therefore causes an uninit-value warning in ip_vs_lblc_check_expire(),
as reported by syzbot.
Reported-by: <syzbot+3e9695f147fb529aa9bc@syzkaller.appspotmail.com>
Cc: Simon Horman <horms@verge.net.au>
Cc: Julian Anastasov <ja@ssi.bg>
Cc: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Acked-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
tbl->entries is not initialized after kmalloc(), therefore
causes an uninit-value warning in ip_vs_lblc_check_expire()
as reported by syzbot.
Reported-by: <syzbot+3dfdea57819073a04f21@syzkaller.appspotmail.com>
Cc: Simon Horman <horms@verge.net.au>
Cc: Julian Anastasov <ja@ssi.bg>
Cc: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Acked-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Simon Horman says:
====================
IPVS Updates for v4.18
please consider these IPVS enhancements for v4.18.
* Whitepace cleanup
* Add Maglev hashing algorithm as a IPVS scheduler
Inju Song says "Implements the Google's Maglev hashing algorithm as a
IPVS scheduler. Basically it provides consistent hashing but offers some
special features about disruption and load balancing.
1) minimal disruption: when the set of destinations changes,
a connection will likely be sent to the same destination
as it was before.
2) load balancing: each destination will receive an almost
equal number of connections.
Seel also: [3.4 Consistent Hasing] in
https://www.usenix.org/system/files/conference/nsdi16/nsdi16-paper-eisenbud.pdf
"
* Fix to correct implementation of Knuth's multiplicative hashing
which is used in sh/dh/lblc/lblcr algorithms. Instead the
implementation provided by the hash_32() macro is used.
====================
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
When bpf_adjust_tail was introduced for generic xdp, it changed skb's tail
pointer, so it was pointing to the new "end of the packet". However skb's
len field wasn't properly modified, so on the wire ethernet frame had
original (or even bigger, if adjust_head was used) size. This diff is
fixing this.
Fixes: 198d83bb3 (" bpf: make generic xdp compatible w/ bpf_xdp_adjust_tail")
Signed-off-by: Nikita V. Shirokov <tehnerd@tehnerd.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Virtual devices such as tunnels and bonding can handle large packets.
Only segment packets when reaching a physical or loopback device.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Allow specifying segment size in the send call.
The new control message performs the same function as socket option
UDP_SEGMENT while avoiding the extra system call.
[ Export udp_cmsg_send for ipv6. -DaveM ]
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When sending large datagrams that are later segmented, store data in
page frags to avoid copying from linear in skb_segment.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
skb_segment by default transfers allocated wmem from the gso skb
to the tail of the segment list. This underreports real truesize
of the list, especially if the tail might be dropped.
Similar to tcp_gso_segment, update wmem_alloc with the aggregate
list truesize and make each segment responsible for its own
share by setting skb->destructor.
Clear gso_skb->destructor prior to calling skb_segment to skip
the default assignment to tail.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Support generic segmentation offload for udp datagrams. Callers can
concatenate and send at once the payload of multiple datagrams with
the same destination.
To set segment size, the caller sets socket option UDP_SEGMENT to the
length of each discrete payload. This value must be smaller than or
equal to the relevant MTU.
A follow-up patch adds cmsg UDP_SEGMENT to specify segment size on a
per send call basis.
Total byte length may then exceed MTU. If not an exact multiple of
segment size, the last segment will be shorter.
The implementation adds a gso_size field to the udp socket, ip(v6)
cmsg cookie and inet_cork structure to be able to set the value at
setsockopt or cmsg time and to work with both lockless and corked
paths.
Initial benchmark numbers show UDP GSO about as expensive as TCP GSO.
tcp tso
3197 MB/s 54232 msg/s 54232 calls/s
6,457,754,262 cycles
tcp gso
1765 MB/s 29939 msg/s 29939 calls/s
11,203,021,806 cycles
tcp without tso/gso *
739 MB/s 12548 msg/s 12548 calls/s
11,205,483,630 cycles
udp
876 MB/s 14873 msg/s 624666 calls/s
11,205,777,429 cycles
udp gso
2139 MB/s 36282 msg/s 36282 calls/s
11,204,374,561 cycles
[*] after reverting commit 0a6b2a1dc2
("tcp: switch to GSO being always on")
Measured total system cycles ('-a') for one core while pinning both
the network receive path and benchmark process to that core:
perf stat -a -C 12 -e cycles \
./udpgso_bench_tx -C 12 -4 -D "$DST" -l 4
Note the reduction in calls/s with GSO. Bytes per syscall drops
increases from 1470 to 61818.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Implement generic segmentation offload support for udp datagrams. A
follow-up patch adds support to the protocol stack to generate such
packets.
UDP GSO is not UFO. UFO fragments a single large datagram. GSO splits
a large payload into a number of discrete UDP datagrams.
The implementation adds a GSO type SKB_UDP_GSO_L4 to differentiate it
from UFO (SKB_UDP_GSO).
IPPROTO_UDPLITE is excluded, as that protocol has no gso handler
registered.
[ Export __udp_gso_segment for ipv6. -DaveM ]
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
UDP segmentation offload needs access to inet_cork in the udp layer.
Pass the struct to ip(6)_make_skb instead of allocating it on the
stack in that function itself.
This patch is a noop otherwise.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
ceph_con_workfn() validates con->state before calling try_read() and
then try_write(). However, try_read() temporarily releases con->mutex,
notably in process_message() and ceph_con_in_msg_alloc(), opening the
window for ceph_con_close() to sneak in, close the connection and
release con->sock. When try_write() is called on the assumption that
con->state is still valid (i.e. not STANDBY or CLOSED), a NULL sock
gets passed to the networking stack:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000020
IP: selinux_socket_sendmsg+0x5/0x20
Make sure con->state is valid at the top of try_write() and add an
explicit BUG_ON for this, similar to try_read().
Cc: stable@vger.kernel.org
Link: https://tracker.ceph.com/issues/23706
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jason Dillaman <dillaman@redhat.com>
In the quest to remove all stack VLA usage removed from the kernel[1],
just use XFRM_MAX_DEPTH as already done for the "class" array. In one
case, it'll do this loop up to 5, the other caller up to 6.
[1] https://lkml.org/lkml/2018/3/7/621
Co-developed-by: Andreas Christoforou <andreaschristofo@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Daniel Borkmann says:
====================
pull-request: bpf 2018-04-25
The following pull-request contains BPF updates for your *net* tree.
The main changes are:
1) Fix to clear the percpu metadata_dst that could otherwise carry
stale ip_tunnel_info, from William.
2) Fix that reduces the number of passes in x64 JIT with regards to
dead code sanitation to avoid risk of prog rejection, from Gianluca.
3) Several fixes of sockmap programs, besides others, fixing a double
page_put() in error path, missing refcount hold for pinned sockmap,
adding required -target bpf for clang in sample Makefile, from John.
4) Fix to disable preemption in __BPF_PROG_RUN_ARRAY() paths, from Roman.
5) Fix tools/bpf/ Makefile with regards to a lex/yacc build error
seen on older gcc-5, from John.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The function rds_ib_setup_qp is calling rds_ib_get_client_data and
should correspondingly call rds_ib_dev_put. This call was lost in
the non-error path with the introduction of error handling done in
commit 3b12f73a5c ("rds: ib: add error handle")
Signed-off-by: Dag Moxnes <dag.moxnes@oracle.com>
Reviewed-by: Håkon Bugge <haakon.bugge@oracle.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The internal CLC socket should exist till the SMC-socket is released.
Function tcp_listen_worker() releases the internal CLC socket of a
listen socket, if an smc_close_active() is called. This function
is called for the final release(), but it is called for shutdown
SHUT_RDWR as well. This opens a door for protection faults, if
socket calls using the internal CLC socket are called for a
shutdown listen socket.
With the changes of
commit 3d50206759 ("net/smc: simplify wait when closing listen socket")
there is no need anymore to release the internal CLC socket in
function tcp_listen_worker((). It is sufficient to release it in
smc_release().
Fixes: 127f497058 ("net/smc: release clcsock from tcp_listen_worker")
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Reported-by: syzbot+9045fc589fcd196ef522@syzkaller.appspotmail.com
Reported-by: syzbot+28a2c86cf19c81d871fa@syzkaller.appspotmail.com
Reported-by: syzbot+9605e6cace1b5efd4a0a@syzkaller.appspotmail.com
Reported-by: syzbot+cf9012c597c8379d535c@syzkaller.appspotmail.com
Signed-off-by: David S. Miller <davem@davemloft.net>
After Commit 4f00878126 ("sctp: apply rhashtable api to send/recv
path"), there's no place using sctp_assoc_is_match, so remove it.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move the check on FRA_L3MDEV attribute to helper to improve the
readability of fib_nl2rule. Update the extack messages to be
clear when the configuration option is disabled versus an invalid
value has been passed.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
It's currently written as:
if (!tchunk->tsn_gap_acked) { [1]
tchunk->tsn_gap_acked = 1;
...
}
if (TSN_lte(tsn, sack_ctsn)) {
if (!tchunk->tsn_gap_acked) {
/* SFR-CACC processing */
...
}
}
Which causes the SFR-CACC processing on ack reception to never process,
as tchunk->tsn_gap_acked is always true by then. Block [1] was
moved to that position by the commit marked below.
This patch fixes it by doing SFR-CACC processing earlier, before
tsn_gap_acked is set to true.
Fixes: 31b02e1549 ("sctp: Failover transmitted list on transport delete")
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Reviewed-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
sctp_make_sack() make changes to the asoc and this cast is just
bypassing the const attribute. As there is no need to have the const
there, just remove it and fix the violation.
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Reviewed-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch extends NTF_EXT_LEARNED support to the neighbour system.
Example use-case: An Ethernet VPN implementation (eg in FRR routing suite)
can use this flag to add dynamic reachable external neigh entires
learned via control plane. The use of neigh NTF_EXT_LEARNED in this
patch is consistent with its use with bridge and vxlan fdb entries.
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The addrconf_ifdown() evaluates keep_addr_on_down state twice. There
is no need to do it.
Cc: David Ahern <dsahern@gmail.com>
Signed-off-by: Ivan Vecera <cera@cera.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
ECMP (equal-cost multipath) hashes are typically computed on the packets'
5-tuple(src IP, dst IP, src port, dst port, L4 proto).
For encapsulated packets, the L4 data is not readily available and ECMP
hashing will often revert to (src IP, dst IP). This will lead to traffic
polarization on a single ECMP path, causing congestion and waste of network
capacity.
In IPv6, the 20-bit flow label field is also used as part of the ECMP hash.
In the lack of L4 data, the hashing will be on (src IP, dst IP, flow
label). Having a non-zero flow label is thus important for proper traffic
load balancing when L4 data is unavailable (i.e., when packets are
encapsulated).
Currently, the seg6_do_srh_encap() function extracts the original packet's
flow label and set it as the outer IPv6 flow label. There are two issues
with this behaviour:
a) There is no guarantee that the inner flow label is set by the source.
b) If the original packet is not IPv6, the flow label will be set to
zero (e.g., IPv4 or L2 encap).
This patch adds a function, named seg6_make_flowlabel(), that computes a
flow label from a given skb. It supports IPv6, IPv4 and L2 payloads, and
leverages the per namespace 'seg6_flowlabel" sysctl value.
The currently support behaviours are as follows:
-1 set flowlabel to zero.
0 copy flowlabel from Inner paceket in case of Inner IPv6
(Set flowlabel to 0 in case IPv4/L2)
1 Compute the flowlabel using seg6_make_flowlabel()
This patch has been tested for IPv6, IPv4, and L2 traffic.
Signed-off-by: Ahmed Abdelsalam <amsalam20@gmail.com>
Acked-by: David Lebrun <dlebrun@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The percpu metadata_dst might carry the stale ip_tunnel_info
and cause incorrect behavior. When mixing tests using ipv4/ipv6
bpf vxlan and geneve tunnel, the ipv6 tunnel info incorrectly uses
ipv4's src ip addr as its ipv6 src address, because the previous
tunnel info does not clean up. The patch zeros the fields in
ip_tunnel_info.
Signed-off-by: William Tu <u9012063@gmail.com>
Reported-by: Yifeng Sun <pkusunyifeng@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
This commit introduces a helper which allows fetching xfrm state
parameters by eBPF programs attached to TC.
Prototype:
bpf_skb_get_xfrm_state(skb, index, xfrm_state, size, flags)
skb: pointer to skb
index: the index in the skb xfrm_state secpath array
xfrm_state: pointer to 'struct bpf_xfrm_state'
size: size of 'struct bpf_xfrm_state'
flags: reserved for future extensions
The helper returns 0 on success. Non zero if no xfrm state at the index
is found - or non exists at all.
struct bpf_xfrm_state currently includes the SPI, peer IPv4/IPv6
address and the reqid; it can be further extended by adding elements to
its end - indicating the populated fields by the 'size' argument -
keeping backwards compatibility.
Typical usage:
struct bpf_xfrm_state x = {};
bpf_skb_get_xfrm_state(skb, 0, &x, sizeof(x), 0);
...
Signed-off-by: Eyal Birger <eyal.birger@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
rt6_remove_exception_rt() is called under rcu_read_lock() only.
We lock rt6_exception_lock a bit later, so we do not hold
rt6_exception_lock yet.
Fixes: 8a14e46f14 ("net/ipv6: Fix missing rcu dereferences on from")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: David Ahern <dsahern@gmail.com>
Acked-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A duplicated null check on sgout is redundant as it is known to be
already true because of the identical earlier check. Remove it.
Detected by cppcheck:
net/tls/tls_sw.c:696: (warning) Identical inner 'if' condition is always
true.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Distributed filesystems are most effective when the server and client
clocks are synchronised. Embedded devices often use NFS for their
root filesystem but typically do not contain an RTC, so the clocks of
the NFS server and the embedded device will be out-of-sync when the root
filesystem is mounted (and may not be synchronised until late in the
boot process).
Extend ipconfig with the ability to export IP addresses of NTP servers
it discovers to /proc/net/ipconfig/ntp_servers. They can be supplied as
follows:
- If ipconfig is configured manually via the "ip=" or "nfsaddrs="
kernel command line parameters, one NTP server can be specified in
the new "<ntp0-ip>" parameter.
- If ipconfig is autoconfigured via DHCP, request DHCP option 42 in
the DHCPDISCOVER message, and record the IP addresses of up to three
NTP servers sent by the responding DHCP server in the subsequent
DHCPOFFER message.
ipconfig will only write the NTP server IP addresses it discovers to
/proc/net/ipconfig/ntp_servers, one per line (in the order received from
the DHCP server, if DHCP autoconfiguration is used); making use of these
NTP servers is the responsibility of a user space process (e.g. an
initrd/initram script that invokes an NTP client before mounting an NFS
root filesystem).
Signed-off-by: Chris Novakovic <chris@chrisn.me.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
To allow ipconfig to report IP configuration details to user space
processes without cluttering /proc/net, create a new subdirectory
/proc/net/ipconfig. All files containing IP configuration details should
be written to this directory.
Signed-off-by: Chris Novakovic <chris@chrisn.me.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
ic_nameservers, which stores the list of name servers discovered by
ipconfig, is initialised (i.e. has all of its elements set to NONE, or
0xffffffff) by ic_nameservers_predef() in the following scenarios:
- before the "ip=" and "nfsaddrs=" kernel command line parameters are
parsed (in ip_auto_config_setup());
- before autoconfiguring via DHCP or BOOTP (in ic_bootp_init()), in
order to clear any values that may have been set after parsing "ip="
or "nfsaddrs=" and are no longer needed.
This means that ic_nameservers_predef() is not called when neither "ip="
nor "nfsaddrs=" is specified on the kernel command line. In this
scenario, every element in ic_nameservers remains set to 0x00000000,
which is indistinguishable from ANY and causes pnp_seq_show() to write
the following (bogus) information to /proc/net/pnp:
#MANUAL
nameserver 0.0.0.0
nameserver 0.0.0.0
nameserver 0.0.0.0
This is potentially problematic for systems that blindly link
/etc/resolv.conf to /proc/net/pnp.
Ensure that ic_nameservers is also initialised when neither "ip=" nor
"nfsaddrs=" are specified by calling ic_nameservers_predef() in
ip_auto_config(), but only when ip_auto_config_setup() was not called
earlier. This causes the following to be written to /proc/net/pnp, and
is consistent with what gets written when ipconfig is configured
manually but no name servers are specified on the kernel command line:
#MANUAL
Signed-off-by: Chris Novakovic <chris@chrisn.me.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
When ipconfig is autoconfigured via BOOTP, the request packet
initialised by ic_bootp_init_ext() always allocates 8 bytes for the name
server option, limiting the BOOTP server to responding with at most 2
name servers even though ipconfig in fact supports an arbitrary number
of name servers (as defined by CONF_NAMESERVERS_MAX, which is currently
3).
Only request name servers in the request packet if CONF_NAMESERVERS_MAX
is positive (to comply with [1, §3.8]), and allocate enough space in the
packet for CONF_NAMESERVERS_MAX name servers to indicate the maximum
number we can accept in response.
[1] RFC 2132, "DHCP Options and BOOTP Vendor Extensions":
https://tools.ietf.org/rfc/rfc2132.txt
Signed-off-by: Chris Novakovic <chris@chrisn.me.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
When ipconfig is autoconfigured via BOOTP, the request packet
initialised by ic_bootp_init_ext() allocates 8 bytes for tag 5 ("Name
Server" [1, §3.7]), but tag 5 in the response isn't processed by
ic_do_bootp_ext(). Instead, allocate the 8 bytes to tag 6 ("Domain Name
Server" [1, §3.8]), which is processed by ic_do_bootp_ext(), and appears
to have been the intended tag to request.
This won't cause any breakage for existing users, as tag 5 responses
provided by BOOTP servers weren't being processed anyway.
[1] RFC 2132, "DHCP Options and BOOTP Vendor Extensions":
https://tools.ietf.org/rfc/rfc2132.txt
Signed-off-by: Chris Novakovic <chris@chrisn.me.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 5e953778a2 ("ipconfig: add
nameserver IPs to kernel-parameter ip=") adds the IP addresses of
discovered name servers to the summary printed by ipconfig when
configuration is complete. It appears the intention in ip_auto_config()
was to print the name servers on a new line (especially given the
spacing and lack of comma before "nameserver0="), but they're actually
printed on the same line as the NFS root filesystem configuration
summary:
[ 0.686186] IP-Config: Complete:
[ 0.686226] device=eth0, hwaddr=xx:xx:xx:xx:xx:xx, ipaddr=10.0.0.2, mask=255.255.255.0, gw=10.0.0.1
[ 0.686328] host=test, domain=example.com, nis-domain=(none)
[ 0.686386] bootserver=10.0.0.1, rootserver=10.0.0.1, rootpath= nameserver0=10.0.0.1
This makes it harder to read and parse ipconfig's output. Instead, print
the name servers on a separate line:
[ 0.791250] IP-Config: Complete:
[ 0.791289] device=eth0, hwaddr=xx:xx:xx:xx:xx:xx, ipaddr=10.0.0.2, mask=255.255.255.0, gw=10.0.0.1
[ 0.791407] host=test, domain=example.com, nis-domain=(none)
[ 0.791475] bootserver=10.0.0.1, rootserver=10.0.0.1, rootpath=
[ 0.791476] nameserver0=10.0.0.1
Signed-off-by: Chris Novakovic <chris@chrisn.me.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
RETPOLINE made calls to tp->af_specific->md5_lookup() quite expensive,
given they have no result.
We can omit the calls for sockets that have no md5 keys.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Updates to the bitfields in struct packet_sock are not atomic.
Serialize these read-modify-write cycles.
Move po->running into a separate variable. Its writes are protected by
po->bind_lock (except for one startup case at packet_create). Also
replace a textual precondition warning with lockdep annotation.
All others are set only in packet_setsockopt. Serialize these
updates by holding the socket lock. Analogous to other field updates,
also hold the lock when testing whether a ring is active (pg_vec).
Fixes: 8dc4194474 ("[PACKET]: Add optional checksum computation for recvmsg")
Reported-by: DaeRyong Jeong <threeearcat@gmail.com>
Reported-by: Byoungyoung Lee <byoungyoung@purdue.edu>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This reverts commit <c6849a3ac17e> ("net: init sk_cookie for inet socket")
Per discussion with Eric, when update sock_net(sk)->cookie_gen, the
whole cache cache line will be invalidated, as this cache line is shared
with all cpus, that may cause great performace hit.
Bellow is the data form Eric.
"Performance is reduced from ~5 Mpps to ~3.8 Mpps with 16 RX queues on
my host" when running synflood test.
Have to revert it to prevent from cache line false sharing.
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If we go without an established session for a while, backoff delay will
climb to 30 seconds. The keepalive timeout is also 30 seconds, so it's
pretty easily hit after a prolonged hunting for a monitor: we don't get
a chance to send out a keepalive in time, which means we never get back
a keepalive ack in time, cutting an established session and attempting
to connect to a different monitor every 30 seconds:
[Sun Apr 1 23:37:05 2018] libceph: mon0 10.80.20.99:6789 session established
[Sun Apr 1 23:37:36 2018] libceph: mon0 10.80.20.99:6789 session lost, hunting for new mon
[Sun Apr 1 23:37:36 2018] libceph: mon2 10.80.20.103:6789 session established
[Sun Apr 1 23:38:07 2018] libceph: mon2 10.80.20.103:6789 session lost, hunting for new mon
[Sun Apr 1 23:38:07 2018] libceph: mon1 10.80.20.100:6789 session established
[Sun Apr 1 23:38:37 2018] libceph: mon1 10.80.20.100:6789 session lost, hunting for new mon
[Sun Apr 1 23:38:37 2018] libceph: mon2 10.80.20.103:6789 session established
[Sun Apr 1 23:39:08 2018] libceph: mon2 10.80.20.103:6789 session lost, hunting for new mon
The regular keepalive interval is 10 seconds. After ->hunting is
cleared in finish_hunting(), call __schedule_delayed() to ensure we
send out a keepalive after 10 seconds.
Cc: stable@vger.kernel.org # 4.7+
Link: http://tracker.ceph.com/issues/23537
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jason Dillaman <dillaman@redhat.com>
This means that if we do some backoff, then authenticate, and are
healthy for an extended period of time, a subsequent failure won't
leave us starting our hunting sequence with a large backoff.
Mirrors ceph.git commit d466bc6e66abba9b464b0b69687cf45c9dccf383.
Cc: stable@vger.kernel.org # 4.7+
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jason Dillaman <dillaman@redhat.com>
It overcomplicates things for no reason.
nft_meta_bridge only offers retrieval of bridge port interface name.
Because of this being its own module, we had to export all nft_meta
functions, which we can then make static again (which even reduces
the size of nft_meta -- including bridge port retrieval...):
before:
text data bss dec hex filename
1838 832 0 2670 a6e net/bridge/netfilter/nft_meta_bridge.ko
6147 936 1 7084 1bac net/netfilter/nft_meta.ko
after:
5826 936 1 6763 1a6b net/netfilter/nft_meta.ko
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
nft rejects rules that lack a timeout and a size limit when they're used
to add elements from packet path.
Pick a sane upperlimit instead of rejecting outright.
The upperlimit is visible to userspace, just as if it would have been
given during set declaration.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Marco De Benedetto says:
I would like to use a timeout of 30 days for elements in a set but it
seems there is a some kind of problem above 24d20h31m23s.
Fix this by using 'jiffies64' for timeout handling to get same behaviour
on 32 and 64bit systems.
nftables passes timeouts as u64 in milliseconds to the kernel,
but on kernel side we used a mixture of 'long' and jiffies conversions
rather than u64 and jiffies64.
Bugzilla: https://bugzilla.netfilter.org/show_bug.cgi?id=1237
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
ipt_get_target is used to get struct xt_entry_target
and ipt_get_target_c is used to get const struct xt_entry_target.
However in the ipt_do_table, ipt_get_target is used to get
const struct xt_entry_target. it should be replaced by ipt_get_target_c.
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
ebt_get_target similar to {ip/ip6/arp}t_get_target.
and ebt_get_target_c similar to {ip/ip6/arp}t_get_target_c.
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
In the check_target, ip6t_get_target is called twice.
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
EBT_MATCH and EBT_NOMATCH are used to change return value.
match functions(ebt_xxx.c) return false when received frame is not matched
and returns true when received frame is matched.
but, EBT_MATCH_ITERATE understands oppositely.
so, to change return value, EBT_MATCH and EBT_NOMATCH are used.
but, we can use operation '!' simply.
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
A ebt_free_table_info frees all of chainstacks.
It similar to xt_free_table_info. this inline function
reduces code line.
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
There are no __exit mark in the helper modules.
because these exit functions used to be called by init function
but now that is not. so we can add __exit mark.
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
This is a patch proposal to support shifted ranges in portmaps. (i.e. tcp/udp
incoming port 5000-5100 on WAN redirected to LAN 192.168.1.5:2000-2100)
Currently DNAT only works for single port or identical port ranges. (i.e.
ports 5000-5100 on WAN interface redirected to a LAN host while original
destination port is not altered) When different port ranges are configured,
either 'random' mode should be used, or else all incoming connections are
mapped onto the first port in the redirect range. (in described example
WAN:5000-5100 will all be mapped to 192.168.1.5:2000)
This patch introduces a new mode indicated by flag NF_NAT_RANGE_PROTO_OFFSET
which uses a base port value to calculate an offset with the destination port
present in the incoming stream. That offset is then applied as index within the
redirect port range (index modulo rangewidth to handle range overflow).
In described example the base port would be 5000. An incoming stream with
destination port 5004 would result in an offset value 4 which means that the
NAT'ed stream will be using destination port 2004.
Other possibilities include deterministic mapping of larger or multiple ranges
to a smaller range : WAN:5000-5999 -> LAN:5000-5099 (maps WAN port 5*xx to port
51xx)
This patch does not change any current behavior. It just adds new NAT proto
range functionality which must be selected via the specific flag when intended
to use.
A patch for iptables (libipt_DNAT.c + libip6t_DNAT.c) will also be proposed
which makes this functionality immediately available.
Signed-off-by: Thierry Du Tre <thierry@dtsystems.be>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Drop nft_set_type's ability to act as a container of multiple backend
implementations it chooses from. Instead consolidate the whole selection
logic in nft_select_set_ops() and the actual backend provided estimate()
callback.
This turns nf_tables_set_types into a list containing all available
backends which is traversed when selecting one matching userspace
requested criteria.
Also, this change allows to embed nft_set_ops structure into
nft_set_type and pull flags field into the latter as it's only used
during selection phase.
A crucial part of this change is to make sure the new layout respects
hash backend constraints formerly enforced by nft_hash_select_ops()
function: This is achieved by introduction of a specific estimate()
callback for nft_hash_fast_ops which returns false for key lengths != 4.
In turn, nft_hash_estimate() is changed to return false for key lengths
== 4 so it won't be chosen by accident. Also, both callbacks must return
false for unbounded sets as their size estimate depends on a known
maximum element count.
Note that this patch partially reverts commit 4f2921ca21 ("netfilter:
nf_tables: meter: pick a set backend that supports updates") by making
nft_set_ops_candidate() not explicitly look for an update callback but
make NFT_SET_EVAL a regular backend feature flag which is checked along
with the others. This way all feature requirements are checked in one
go.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Keep it simple to start with, just report attribute offsets that can be
useful to userspace when representating errors to users.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Replace the nf_tables_ prefix by nft_ and merge code into single lookup
function whenever possible. In many cases we go over the 80-chars
boundary function names, this save us ~50 LoC.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Pass all NAT types to the flow offload struct, otherwise parts of the
address/port pair do not get translated properly, causing connection
stalls
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Allow the slow path to handle the shutdown of the connection with proper
timeouts. The packet containing RST/FIN is also sent to the slow path
and the TCP conntrack module will update its state.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Since conntrack hasn't seen any packets from the offloaded flow in a
while, and the timeout for offloaded flows is set to an extremely long
value, we need to fix up the state before we can send a flow back to the
slow path.
For TCP, reset td_maxwin in both directions, which makes it resync its
state on the next packets.
Use the regular timeout for TCP and UDP established connections.
This allows the slow path to take over again once the offload state has
been torn down
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
On cleanup, this will be treated differently from FLOW_OFFLOAD_DYING:
If FLOW_OFFLOAD_DYING is set, the connection is going away, so both the
offload state and the connection tracking entry will be deleted.
If FLOW_OFFLOAD_TEARDOWN is set, the connection remains alive, but
the offload state is torn down. This is useful for cases that require
more complex state tracking / timeout handling on TCP, or if the
connection has been idle for too long.
Support for sending flows back to the slow path will be implemented in
a following patch
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
It is too trivial to keep as a separate exported function
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Avoids having nf_flow_table depend on nftables (useful for future
iptables backport work)
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The offload ip hook expects a pointer to the flowtable, not to the
rhashtable. Since the rhashtable is the first member, this is safe for
the moment, but breaks as soon as the structure layout changes
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Reduces duplication of .gc and .params in flowtable type definitions and
makes the API clearer
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Since the offload hook code was moved, this table no longer depends on
the IPv4 and IPv6 flowtable modules
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Useful as preparation for adding iptables support for offload.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Allows the function to be shared with the IPv6 hook code
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Allows some minor code sharing with the ipv6 hook code and is also
useful as preparation for adding iptables support for offload
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Check sockaddr_len before dereferencing sp->sa_protocol, to ensure that
it actually points to valid data.
Fixes: fd558d186d ("l2tp: Split pppol2tp patch into separate l2tp and ppp parts")
Reported-by: syzbot+a70ac890b23b1bf29f5c@syzkaller.appspotmail.com
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pablo Neira Ayuso says:
====================
Netfilter/IPVS fixes for net
The following patchset contains Netfilter/IPVS fixes for your net tree,
they are:
1) Fix SIP conntrack with phones sending session descriptions for different
media types but same port numbers, from Florian Westphal.
2) Fix incorrect rtnl_lock mutex logic from IPVS sync thread, from Julian
Anastasov.
3) Skip compat array allocation in ebtables if there is no entries, also
from Florian.
4) Do not lose left/right bits when shifting marks from xt_connmark, from
Jack Ma.
5) Silence false positive memleak in conntrack extensions, from Cong Wang.
6) Fix CONFIG_NF_REJECT_IPV6=m link problems, from Arnd Bergmann.
7) Cannot kfree rule that is already in list in nf_tables, switch order
so this error handling is not required, from Florian Westphal.
8) Release set name in error path, from Florian.
9) include kmemleak.h in nf_conntrack_extend.c, from Stepheh Rothwell.
10) NAT chain and extensions depend on NF_TABLES.
11) Out of bound access when renaming chains, from Taehee Yoo.
12) Incorrect casting in xt_connmark leads to wrong bitshifting.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
kbuild test robot reported 2 uses of rt->from not properly accessed
using rcu_dereference:
1. add rcu_dereference_protected to rt6_remove_exception_rt and make
sure it is always called with rcu lock held.
2. change rt6_do_redirect to take a reference on 'from' when accessed
the first time so it can be used the sceond time outside of the lock
Fixes: a68886a691 ("net/ipv6: Make from in rt6_info rcu protected")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
KMSAN reported use of uninit-value that I tracked to lack
of proper size check on RTA_TABLE attribute.
I also believe RTA_PREFSRC lacks a similar check.
Fixes: 86872cb579 ("[IPv6] route: FIB6 configuration using struct fib6_config")
Fixes: c3968a857a ("ipv6: RTA_PREFSRC support for ipv6 route source address selection")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Acked-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
With sk_cookie we can identify a socket, that is very helpful for
traceing and statistic, i.e. tcp tracepiont and ebpf.
So we'd better init it by default for inet socket.
When using it, we just need call atomic64_read(&sk->sk_cookie).
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This reduces code duplication in the fib rule add and del paths.
Get rid of validate_rulemsg. This became obvious when adding duplicate
extack support in fib newrule/delrule error paths.
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
tcp_rcv_space_adjust is called every time data is copied to user space,
introducing a tcp tracepoint for which could show us when the packet is
copied to user.
When a tcp packet arrives, tcp_rcv_established() will be called and with
the existed tracepoint tcp_probe we could get the time when this packet
arrives.
Then this packet will be copied to user, and tcp_rcv_space_adjust will
be called and with this new introduced tracepoint we could get the time
when this packet is copied to user.
With these two tracepoints, we could figure out whether the user program
processes this packet immediately or there's latency.
Hence in the printk message, sk_cookie is printed as a key to relate
tcp_rcv_space_adjust with tcp_probe.
Maybe we could export sockfd in this new tracepoint as well, then we
could relate this new tracepoint with epoll/read/recv* tracepoints, and
finally that could show us the whole lifespan of this packet. But we
could also implement that with pid as these functions are executed in
process context.
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch checks if sk buffer is available to dererence ife header. If
not then NULL will returned to signal an malformed ife packet. This
avoids to crashing the kernel from outside.
Signed-off-by: Alexander Aring <aring@mojatatu.com>
Reviewed-by: Yotam Gigi <yotam.gi@gmail.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There is currently no handling to check on a invalid tlv length. This
patch adds such handling to avoid killing the kernel with a malformed
ife packet.
Signed-off-by: Alexander Aring <aring@mojatatu.com>
Reviewed-by: Yotam Gigi <yotam.gi@gmail.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We need to record stats for received metadata that we dont know how
to process. Have find_decode_metaid() return -ENOENT to capture this.
Signed-off-by: Alexander Aring <aring@mojatatu.com>
Reviewed-by: Yotam Gigi <yotam.gi@gmail.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
struct sock's sk_rcvtimeo is initialized to
LONG_MAX/MAX_SCHEDULE_TIMEOUT in sock_init_data. Calling
mod_delayed_work with a timeout of LONG_MAX causes spurious execution of
the work function. timer->expires is set equal to jiffies + LONG_MAX.
When timer_base->clk falls behind the current value of jiffies,
the delta between timer_base->clk and jiffies + LONG_MAX causes the
expiration to be in the past. Returning early from strp_start_timer if
timeo == LONG_MAX solves this problem.
Found while testing net/tls_sw recv path.
Fixes: 43a0c6751a ("strparser: Stream parser for messages")
Reviewed-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Doron Roberts-Kedes <doronrk@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
For SOCK_ZAPPED socket, we don't need to care about llc->sap,
so we should just skip these refcount functions in this case.
Fixes: f7e4367268 ("llc: hold llc_sap before release_sock()")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The connection timers of an llc sock could be still flying
after we delete them in llc_sk_free(), and even possibly
after we free the sock. We could just wait synchronously
here in case of troubles.
Note, I leave other call paths as they are, since they may
not have to wait, at least we can change them to synchronously
when needed.
Also, move the code to net/llc/llc_conn.c, which is apparently
a better place.
Reported-by: <syzbot+f922284c18ea23a8e457@syzkaller.appspotmail.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 0e0c3fee3a ("l2tp: hold reference on tunnels printed in pppol2tp proc file")
assumed that if pppol2tp_seq_stop() was called with non-NULL private
data (the 'v' pointer), then pppol2tp_seq_start() would not be called
again. It turns out that this isn't guaranteed, and overflowing the
seq_file's buffer in pppol2tp_seq_show() is a way to get into this
situation.
Therefore, pppol2tp_seq_stop() needs to reset pd->tunnel, so that
pppol2tp_seq_start() won't drop a reference again if it gets called.
We also have to clear pd->session, because the rest of the code expects
a non-NULL tunnel when pd->session is set.
The l2tp_debugfs module has the same issue. Fix it in the same way.
Fixes: 0e0c3fee3a ("l2tp: hold reference on tunnels printed in pppol2tp proc file")
Fixes: f726214d9b ("l2tp: hold reference on tunnels printed in l2tp/tunnels debugfs file")
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Dan reported an imbalance in fib6_check on use of f6i and checking
whether it is null. Since fib6_check is only called if f6i is non-null,
remove the unnecessary check.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When a dst entry is created from a fib entry, the 'from' in rt6_info
is set to the fib entry. The 'from' reference is used most notably for
cookie checking - making sure stale dst entries are updated if the
fib entry is changed.
When a fib entry is deleted, the pcpu routes on it are walked releasing
the fib6_info reference. This is needed for the fib6_info cleanup to
happen and to make sure all device references are released in a timely
manner.
There is a race window when a FIB entry is deleted and the 'from' on the
pcpu route is dropped and the pcpu route hits a cookie check. Handle
this race using rcu on from.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A later patch protects 'from' in rt6_info and this simplifies the
locking needed by it.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A later patch protects 'from' in rt6_info and this simplifies the
locking needed by it.
With the move, the fib6_info_hold for the uncached_rt is no longer
needed since the rcu_lock is still held.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
rt6_get_cookie_safe takes a fib6_info and checks the sernum of
the node. Update the name to reflect its purpose.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
rt6_clean_expires and rt6_set_expires are no longer used. Removed them.
rt6_update_expires has 1 caller in route.c, so move it from the header.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann says:
====================
pull-request: bpf-next 2018-04-21
The following pull-request contains BPF updates for your *net-next* tree.
The main changes are:
1) Initial work on BPF Type Format (BTF) is added, which is a meta
data format which describes the data types of BPF programs / maps.
BTF has its roots from CTF (Compact C-Type format) with a number
of changes to it. First use case is to provide a generic pretty
print capability for BPF maps inspection, later work will also
add BTF to bpftool. pahole support to convert dwarf to BTF will
be upstreamed as well (https://github.com/iamkafai/pahole/tree/btf),
from Martin.
2) Add a new xdp_bpf_adjust_tail() BPF helper for XDP that allows
for changing the data_end pointer. Only shrinking is currently
supported which helps for crafting ICMP control messages. Minor
changes in drivers have been added where needed so they recalc
the packet's length also when data_end was adjusted, from Nikita.
3) Improve bpftool to make it easier to feed hex bytes via cmdline
for map operations, from Quentin.
4) Add support for various missing BPF prog types and attach types
that have been added to kernel recently but neither to bpftool
nor libbpf yet. Doc and bash completion updates have been added
as well for bpftool, from Andrey.
5) Proper fix for avoiding to leak info stored in frame data on page
reuse for the two bpf_xdp_adjust_{head,meta} helpers by disallowing
to move the pointers into struct xdp_frame area, from Jesper.
6) Follow-up compile fix from BTF in order to include stdbool.h in
libbpf, from Björn.
7) Few fixes in BPF sample code, that is, a typo on the netdevice
in a comment and fixup proper dump of XDP action code in the
tracepoint exception, from Wang and Jesper.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
