The S_FMT and TRY_FMT handlers in multiplane mode attempt at clearing
the reserved fields of the v4l2_format structure after the pix_mp
member. However, the reserved fields are inside pix_mp, not after it.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Kieran Bingham <kieran@bingham.xyz>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The driver used integers for what boolean would have been a better fit.
Use boolean instead.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
This will allow adding new operations without increasing the
media_device structure size for drivers that don't implement any media
device operation.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
SMIA++ supports 14 and 16 bits per pixel formats as well. Add support to
these formats in the driver.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
As reported by smatch:
drivers/media/platform/pxa_camera.c: In function 'pxa_dma_start_channels':
drivers/media/platform/pxa_camera.c:457:21: warning: variable 'active' set but not used [-Wunused-but-set-variable]
struct pxa_buffer *active;
^~~~~~
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Allow building this driver if COMPILE_TEST is set.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
This is a tiny fix for a switch case which quiets 2 checkpatch harmless
warnings. The generated code is not affected.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
As the conversion to a v4l2 standalone device is finished, move
pxa_camera one directory up and finish severing any dependency to
soc_camera.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Instead of the legacy behavior where it was required to wait for all
video buffers to be finished by the hardware, use a cancel like strategy
: as soon as the stop_streaming() call is done, abort all DMA transfers,
report the already buffers as failed and return.
This makes stop_streaming() more a "cancel capture" than a "wait for end
of capture" semantic.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
This patch removes the soc_camera API dependency from pxa_camera.
In the current status :
- all previously captures are working the same on pxa270
- the s_crop() call was removed, judged not working
(see what happens soc_camera_s_crop() when get_crop() == NULL)
- if the pixel clock is provided by then sensor, ie. not MCLK, the dual
stage change is not handled yet.
=> there is no in-tree user of this, so I'll let it that way
- the MCLK is not yet finished, it's as in the legacy way,
ie. activated at video device opening and closed at video device
closing.
In a subsequence patch pxa_camera_mclk_ops should be used, and
platform data MCLK ignored. It will be the sensor's duty to request
the clock and enable it, which will end in pxa_camera_mclk_ops.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
This is to be seen as a regression as the set_selection (former
set_crop) function is removed. This is a temporary situation in the v4l2
porting, and will have to be added later.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Make all print consistent by always using :
- dev_xxx(pcdev_to_dev(pcdev), ....)
This prepares the soc_camera adherence removal by making these call rely
on only pcdev, and not the soc_camera icd structure.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Introduce sensor_call(), which will be used for all sensor invocations.
This is a preparation move to v4l2 device conversion, ie. soc_camera
adherence removal.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Move the functions in the file to be regrouped into meaningful blocks :
1. pxa camera core handling functions, manipulating the herdware
2. videobuf2 functions, dealing with video buffers
3. video ioctl (vidioc) related functions
4. driver probing, removal, suspend and resume
This patch doesn't modify a single line of code.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Convert pxa_camera from videobuf to videobuf2.
As the soc_camera was already compatible with videobuf2, the port is
quite straightforward.
The special case of this code in which the vb2 to prepare is "too
big" in terms of size for the new capture format, the pxa_camera will
fail.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
As the mt9m111 is now working as a standalone v4l2 subdevice sensor,
move it out of soc_camera directory and sever its dependency on
soc_camera.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
mt9m111 being a camera sensor, its colorspace should always be SRGB, for
both RGB based formats or YCbCr based ones.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Remove the soc_camera adherence. Mostly the change removes the power
manipulation provided by soc_camera, and instead :
- powers on the sensor when the s_power control is activated
- powers on the sensor in initial probe
- enables and disables the MCLK provided to it in power on/off
This patch also drops support for inverters on synchronisation and clock
lines. It is assumed, if any board ever needs such inverters, support
for them can be added in the future
Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
This patch adds the H.264 video encoding capability in the V4L2 HVA
video encoder driver for STMicroelectronics SoC (hva-h264.c).
The main supported features are:
- profile: baseline, main, high, stereo high
- level: up to 4.2
- bitrate mode: CBR, VBR
- entropy mode: CABAC, CAVLC
- video aspect: 1x1 only
Signed-off-by: Yannick Fertre <yannick.fertre@st.com>
Signed-off-by: Jean-Christophe Trotin <jean-christophe.trotin@st.com>
Acked-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
This patch adds V4L2 HVA (Hardware Video Accelerator) video encoder
driver for STMicroelectronics SoC. It uses the V4L2 mem2mem framework.
This patch only contains the core parts of the driver:
- the V4L2 interface with the userland (hva-v4l2.c)
- the hardware services (hva-hw.c)
- the memory management utilities (hva-mem.c)
This patch doesn't include the support of specific codec (e.g. H.264)
video encoding: this support is part of subsequent patches.
Signed-off-by: Yannick Fertre <yannick.fertre@st.com>
Signed-off-by: Jean-Christophe Trotin <jean-christophe.trotin@st.com>
Acked-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
There are several functions documented at the C file. Move
them to the header, as this is the one used to build the
media books.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
There are several functions that were documented at the .c
file. As we only include the headers, we need to move them to
there, in order to have documentation.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Several routines are somewhat documented at v4l2-mem2mem.c
file. Move what's there to the header file.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
demux.h was lacking documentation for the DMX_FE_ENTRY macro:
./drivers/media/dvb-core/demux.h:511: WARNING: c:func reference target not found: DMX_FE_ENTRY
While here, get rid of unused parameters and fix a few minor issues
at the header file.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
There are a few define macros not documented, because the ReST
output was causing more warnings.
Now that this got fixed, document them. While here, fix the
remaining coding style issues.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Instead of keeping those notes at the file on a non-structured
way, move them to dtv-core.rst, using the proper ReST tags.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
There are several functions there there weren't properly
documented. Add documentation for them.
While here, make checkpatch.pl happier.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Update the cobalt EDID, fixing various incorrect values (wrong name,
product code, various video capabilities).
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Update the vivid EDID, fixing various incorrect values (wrong name,
product code, various video capabilities).
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
As warned by smatch:
drivers/media/pci/tw5864/tw5864-core.c:160 tw5864_h264_isr() error: double lock 'irqsave:flags'
drivers/media/pci/tw5864/tw5864-core.c:174 tw5864_h264_isr() error: double unlock 'irqsave:flags'
Two different spinlocks are obtained, so having two calls is correct,
but second irqsave is superfluous, and using same "flags" variable is
just wrong.
Reported-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Andrey Utkin <andrey.utkin@corp.bluecherry.net>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
This reverts commit 617e901a12 ("[media] tw5864: remove double irq lock code").
That commit was rejected by Andrey Utkin <andrey_utkin@fastmail.com>,
but it had already been merged. Revert and apply Andrey's corrected
patch next.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Replace the 'IS_ERR_VALUE(irq)' with 'ret < 0' in
function 'atmel_isc_probe'.
Reported-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Songjun Wu <songjun.wu@microchip.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
This commit adds support for VIDIOC_ENUM_FRAMESIZES
and VIDIOC_ENUM_FRAMEINTERVALS enumeration ioctls.
Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The field "owner" is set by core. Thus delete an extra initialisation.
Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
This patch add g/s_selection for MT8173 V4L2 Encoder.
Only output queue support g/s_selection to configure crop.
The top/left of active rectangle should always be (0,0)
Signed-off-by: Tiffany Lin <tiffany.lin@mediatek.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The field "owner" is set by core. Thus delete an extra initialisation.
Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The clock framework is generally so well supported that there's no reason
to keep this one around.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Switch from the old gpio API to the new descriptor based gpiod API.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The data may now be const as well.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The clock may be provided by a driver which is yet to probe. Print the
actual error code as well.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
This is really configuration to the driver originating from DT or
elsewhere. Do not call it platform data.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Unify enforced 8-bit read access with that based on actual need.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The driver should not ignore errors while registering the I2C
bus, as this device can't even minimally work without the buses,
as it uses those buses internally to talk with the several IP
blocks inside the chip.
Cc: stable@vger.kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The cx231xx_get_i2c_adap() function should return the I2C
adapter that will be used to talk with a device. It should never
be NULL, as otherwise the driver will try to dereference a
null pointer.
We might instead fix the callers, but if this condition
ever happens, it is really a driver bug, because i2c_port
should always be a value from enum CX231XX_I2C_MASTER_PORT.
Found when checking the code due to this bug:
[ 39.769021] BUG: unable to handle kernel NULL pointer dereference at 0000000000000002
[ 39.769105] IP: [<ffffffff81638393>] i2c_master_send+0x13/0x70
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The number of the cx231xx REQ for GPIO register set/get are wrong.
They should follow what's there at cx231xx-pcb-cfg.h.
Noticed while checking the cx231xx parser at the v4l-utils.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
If something bad happens when switching between digital
and analog mode, prints an error and outputs the returned code.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
This device uses GPIOs: 28 to switch between analog and
digital modes: on digital mode, it should be set to 1.
The code that sets it on analog mode is OK, but it misses
the logic that sets it on digital mode.
Cc: stable@vger.kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The cx231xx_set_agc_analog_digital_mux_select() callers
expect it to return 0 or an error. Returning a positive value
makes the first attempt to switch between analog/digital to fail.
Cc: stable@vger.kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
With the current settings, only one channel locks properly.
That's likely because, when this driver was written, Brazil
were still using experimental transmissions.
Change it to reproduce the settings used by the newer drivers.
That makes it lock on other channels.
Tested with both PixelView SBTVD Hybrid (cx231xx-based) and
C3Tech Digital Duo HDTV/SDTV (em28xx-based) devices.
Cc: stable@vger.kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
On this frontend, it takes a while to start output normal
TS data. That only happens on state S9. On S8, the TS output
is enabled, but it is not reliable enough.
However, the zigzag loop is too fast to let it sync.
As, on practical tests, the zigzag software loop doesn't
seem to be helping, but just slowing down the tuning, let's
switch to hardware algorithm, as the tuners used on such
devices are capable of work with frequency drifts without
any help from software.
Cc: stable@vger.kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
use pr_fmt() & friends for error messages to output like:
[ 9.651721] tea5767: Chip ID is not zero. It is not a TEA5767
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Some messages have a hardcoded prefix; others not. Use the
pr_fmt() to ensure that all messages will use the same prefix.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
kmalloc will print enough information in case of failure.
Signed-off-by: Wolfram Sang <wsa-dev@sang-engineering.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
kmalloc will print enough information in case of failure.
Signed-off-by: Wolfram Sang <wsa-dev@sang-engineering.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
kmalloc will print enough information in case of failure.
Signed-off-by: Wolfram Sang <wsa-dev@sang-engineering.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
kmalloc will print enough information in case of failure.
Signed-off-by: Wolfram Sang <wsa-dev@sang-engineering.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
kmalloc will print enough information in case of failure.
Signed-off-by: Wolfram Sang <wsa-dev@sang-engineering.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
kmalloc will print enough information in case of failure.
Signed-off-by: Wolfram Sang <wsa-dev@sang-engineering.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
kmalloc will print enough information in case of failure.
Signed-off-by: Wolfram Sang <wsa-dev@sang-engineering.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
kmalloc will print enough information in case of failure.
Signed-off-by: Wolfram Sang <wsa-dev@sang-engineering.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
kmalloc will print enough information in case of failure.
Signed-off-by: Wolfram Sang <wsa-dev@sang-engineering.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
kmalloc will print enough information in case of failure.
Signed-off-by: Wolfram Sang <wsa-dev@sang-engineering.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
kmalloc will print enough information in case of failure.
Signed-off-by: Wolfram Sang <wsa-dev@sang-engineering.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
kmalloc will print enough information in case of failure.
Signed-off-by: Wolfram Sang <wsa-dev@sang-engineering.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
kmalloc will print enough information in case of failure.
Signed-off-by: Wolfram Sang <wsa-dev@sang-engineering.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
kmalloc will print enough information in case of failure.
Signed-off-by: Wolfram Sang <wsa-dev@sang-engineering.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
kmalloc will print enough information in case of failure.
Signed-off-by: Wolfram Sang <wsa-dev@sang-engineering.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
kmalloc will print enough information in case of failure.
Signed-off-by: Wolfram Sang <wsa-dev@sang-engineering.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
kmalloc will print enough information in case of failure.
Signed-off-by: Wolfram Sang <wsa-dev@sang-engineering.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
kmalloc will print enough information in case of failure.
Signed-off-by: Wolfram Sang <wsa-dev@sang-engineering.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
kmalloc will print enough information in case of failure.
Signed-off-by: Wolfram Sang <wsa-dev@sang-engineering.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
kmalloc will print enough information in case of failure.
Signed-off-by: Wolfram Sang <wsa-dev@sang-engineering.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
kmalloc will print enough information in case of failure.
Signed-off-by: Wolfram Sang <wsa-dev@sang-engineering.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
kmalloc will print enough information in case of failure.
Signed-off-by: Wolfram Sang <wsa-dev@sang-engineering.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
kmalloc will print enough information in case of failure.
Signed-off-by: Wolfram Sang <wsa-dev@sang-engineering.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
kmalloc will print enough information in case of failure.
Signed-off-by: Wolfram Sang <wsa-dev@sang-engineering.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
kmalloc will print enough information in case of failure.
Signed-off-by: Wolfram Sang <wsa-dev@sang-engineering.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
kmalloc will print enough information in case of failure.
Signed-off-by: Wolfram Sang <wsa-dev@sang-engineering.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
kmalloc will print enough information in case of failure.
Signed-off-by: Wolfram Sang <wsa-dev@sang-engineering.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
kmalloc will print enough information in case of failure.
Signed-off-by: Wolfram Sang <wsa-dev@sang-engineering.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Newer SoCs (Meson 8b and GXBB) are using REG2 (offset 0x20) instead of
REG1 to configure the decoder mode. This makes it necessary to
introduce new bindings so the driver knows which register has to be
used.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Tested-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
v4l2_err() can not be used for printing error for missing interleaved
support in DMA as this point the pcdev->v4l2_dev is not valid.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Fix this sparse warning:
drivers/media/rc/redrat3.c:490:18: warning: incorrect type in assignment (different base types)
drivers/media/rc/redrat3.c:495:9: warning: cast to restricted __be32
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
changed 'unsigned' to 'unsigned int' to obtain the coding style.
Signed-off-by: Jannik Becher <Becher.Jannik@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* Reuse existing functionality from memdup_user() instead of keeping
duplicate source code.
This issue was detected by using the Coccinelle software.
* Return directly if this copy operation failed.
* Replace the specification of data structures by pointer dereferences
to make the corresponding size determination a bit safer according to
the Linux coding style convention.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The kernel-doc has the wrong function name and also the pindex
parameter is missing in the documentation.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The error return path of failed calls to heleno_x_pon leak
memory because priv is not kfree'd. Fix this by kfree'ing
priv before returning.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Abylay Ospan <aospan@netup.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The v4l2_subdev_core_ops .registered_async callback was added to notify
a subdev when its entity has been registered with the media device, to
allow for example to modify the media graph (i.e: adding entities/links).
But that's not needed since there is already a .registered callback in
struct v4l2_subdev_internal_ops that's called after the entity has been
registered with the media device in v4l2_device_register_subdev().
Suggested-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The driver is using the struct v4l2_subdev_core_ops .registered_async
callback to register the connector entities and create the pad links
after the subdev entity has been registered with the media device.
But the .registered_async callback isn't needed since the v4l2 core
already calls the struct v4l2_subdev_internal_ops .registered callback
in v4l2_device_register_subdev(), after media_device_register_entity().
So, use the .registered() callback instead of the .registered_async()
that is going to be removed in a following patch since isn't needed.
Suggested-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Albeit not prohibited explicitly, re-registering sub-devices generated a
big, loud warning which quite likely soon was followed by a crash. What
followed was re-initialising a media entity, driver's registered() callback
being called and re-adding a list entry to a list.
Prevent this by returning an error if a sub-device is already registered.
[mchehab@s-opensource.com: reorder logic to check if !sd before dereferencing it]
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
It is likely that checking the result of the 2nd 'read16' is expected here.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Add support for the Hauppauge WinTV quadHD ATSC version.
IR support has not been provided, all 4 tuners, demodulators etc are working.
Further documentation can be found on Linux TV wiki.
Signed-off-by: Stephen Backway <stev391@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
When resuming from suspend-to-RAM on r8a7795/salvator-x:
dpm_run_callback(): pm_genpd_resume_noirq+0x0/0x90 returns 1
PM: Device fe940000.fdp1 failed to resume noirq: error 1
dpm_run_callback(): pm_genpd_resume_noirq+0x0/0x90 returns 1
PM: Device fe944000.fdp1 failed to resume noirq: error 1
dpm_run_callback(): pm_genpd_resume_noirq+0x0/0x90 returns 1
PM: Device fe948000.fdp1 failed to resume noirq: error 1
According to its documentation, rcar_fcp_enable() returns 0 on success
or a negative error code if an error occurs. Hence
fdp1_pm_runtime_resume() and vsp1_pm_runtime_resume() forward its return
value to their callers.
However, rcar_fcp_enable() forwards the return value of
pm_runtime_get_sync(), which can actually be 1 on success, leading to
the resume failure above.
To fix this, consider only negative values returned by
pm_runtime_get_sync() to be failures.
Fixes: 7b49235e83 ("[media] v4l: Add Renesas R-Car FCP driver")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The core will do this for us now.
Signed-off-by: Wolfram Sang <wsa-dev@sang-engineering.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The core will do this for us now.
Signed-off-by: Wolfram Sang <wsa-dev@sang-engineering.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The core will do this for us now.
Signed-off-by: Wolfram Sang <wsa-dev@sang-engineering.com>
Acked-by: Abylay Ospan <aospan@netup.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Fix to return error code -ENOMEM from the i2c client register error
handling case instead of 0, as done elsewhere in this function.
Signed-off-by: Wei Yongjun <weiyj.lk@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The core will do this for us now.
Signed-off-by: Wolfram Sang <wsa-dev@sang-engineering.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
alloc_workqueue replaces deprecated create_singlethread_workqueue().
The MFC device driver is a v4l2 driver which can encode/decode video
raw/elementary streams and has support for all popular video codecs.
The driver's watchdog_workqueue has been replaced with system_wq since
it queues a single work item, &dev->watchdog_work, which calls for no
ordering requirement. The work item is involved in running the watchdog
timer and is not being used on a memory reclaim path.
Work item has been flushed in s5p_mfc_remove() to ensure
that there are no pending tasks while disconnecting the driver.
Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Missing blank lines after declarations are making it hard to read the
code. Fix them and also fix other checkpatch warnings at the same time.
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Acked-by: Jacek Anaszewski <j.anaszewski@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Remove unneeded error handling on the result of a call
to platform_get_resource() when the value is passed to
devm_ioremap_resource().
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
According to the V4L2 documentation the driver and card fields should be
used to identify the driver and the device but the gsc-m2m driver fills
those field using the platform device name, which in turn is the name of
the device DT node.
So not only the filled information isn't correct but also the same values
are used in the driver, card and bus_info fields.
Before this patch:
Driver Info (not using libv4l2):
Driver name : 13e00000.video-
Card type : 13e00000.video-scaler
Bus info : platform:13e00000.video-scaler
Driver version: 4.7.0
After this patch:
Driver Info (not using libv4l2):
Driver name : exynos-gsc
Card type : exynos-gsc gscaler
Bus info : platform:13e00000.video-scaler
Driver version: 4.7.0
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The driver doesn't set the device in the struct v4l2_capability bus_info
field so v4l2-compliance reports the following error for VIDIOC_QUERYCAP:
Required ioctls:
fail: v4l2-compliance.cpp(537): missing bus_info prefix ('platform')
test VIDIOC_QUERYCAP: FAIL
This patch fixes this by filling also the device besides the bus.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The driver fills in both the struct v4l2_capability driver and card fields
the same values, that is the driver's name plus the information if the dev
is a decoder or an encoder.
But the driver field has a fixed length of 16 bytes so the filled data is
truncated:
Driver Info (not using libv4l2):
Driver name : s5p-jpeg decode
Card type : s5p-jpeg decoder
Bus info : platform:11f50000.jpeg
Driver version: 4.7.0
Also, this field should only contain the driver's name so use just that.
The information if the device is a decoder or an encoder is in the card
type field anyways.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Acked-by: Jacek Anaszewski <j.anaszewski@samsung.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Reviewed-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The same struct device_node * is used for looking up the I2C sensor, OF
graph endpoint and port. So the reference count is incremented but not
decremented for the endpoint and port nodes.
Fix this by having separate pointers for each node looked up.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Tested-by: Nicolas Dufresne <nicoas.dufresne@collabora.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The driver doesn't set the struct v4l2_capability cap_info field so the
v4l2-compliance tool reports the following errors for VIDIOC_QUERYCAP:
Required ioctls:
VIDIOC_QUERYCAP returned 0 (Success)
fail: v4l2-compliance.cpp(304): string empty
fail: v4l2-compliance.cpp(528): check_ustring(vcap.bus_info, sizeof(vcap.bus_info))
test VIDIOC_QUERYCAP: FAIL
This patch fixes by setting the field in VIDIOC_QUERYCAP ioctl handler:
Required ioctls:
VIDIOC_QUERYCAP returned 0 (Success)
test VIDIOC_QUERYCAP: OK
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Acked-by: Jacek Anaszewski <j.anaszewski@samsung.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Reviewed-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Remove those two vars that aren't used, as reported by smatch:
drivers/media/pci/tw5864/tw5864-video.c: In function 'tw5864_prepare_frame_headers':
drivers/media/pci/tw5864/tw5864-video.c:1219:16: warning: variable 'space_before_sl_hdr' set but not used [-Wunused-but-set-variable]
unsigned long space_before_sl_hdr;
^~~~~~~~~~~~~~~~~~~
drivers/media/pci/tw5864/tw5864-video.c:1218:6: warning: variable 'sl_hdr' set but not used [-Wunused-but-set-variable]
u8 *sl_hdr;
^~~~~~
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
This patch remove field and function that unused anymore
Signed-off-by: Tiffany Lin <tiffany.lin@mediatek.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
This patch :
1. remove field and function that unused anymore
2. add support V4L2_MPEG_VIDEO_H264_LEVEL_4_2
Signed-off-by: Tiffany Lin <tiffany.lin@mediatek.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
This patch change default H264 profile from V4L2_MPEG_VIDEO_H264_PROFILE_MAIN
to V4L2_MPEG_VIDEO_H264_PROFILE_HIGH
Signed-off-by: Tiffany Lin <tiffany.lin@mediatek.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
This patch add copying timestamp and timecode from src buffer to dst buffer
Signed-off-by: Tiffany Lin <tiffany.lin@mediatek.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The original code add extra 32 line to visible_height.
It is incorrect, 32 line should be add to coded_height.
The purpose is that user space could calcuate real buffer size needed by using
coded_width * coded_height.
But this method will make v4l2-compliance test fail, since g_fmt != s_fmt(g_fmt)
So remove extend visible_height or coded_height, user space should just
use sizeimage to get real buffer size needed
Signed-off-by: Tiffany Lin <tiffany.lin@mediatek.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
This patch fix that mtk_vcodec_venc_release should be called after v4l2_m2m_ctx_release
Signed-off-by: Tiffany Lin <tiffany.lin@mediatek.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
This patch remove unused header and define from haeder files
Signed-off-by: Tiffany Lin <tiffany.lin@mediatek.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Fix this warning:
warning: (VIDEO_TW5864 && VIDEO_MEDIATEK_VCODEC) selects VIDEOBUF2_DMA_CONTIG which has unmet direct dependencies (MEDIA_SUPPORT && HAS_DMA)
This driver depends on HAS_DMA.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Support for boards based on Techwell TW5864 chip which provides
multichannel video & audio grabbing and encoding (H.264, MJPEG,
ADPCM G.726).
This submission implements only H.264 encoding of all channels at D1
resolution.
Thanks to Mark Thompson <sw@jkqxz.net> for help, and for contribution of
H.264 startcode emulation prevention code.
Signed-off-by: Andrey Utkin <andrey.utkin@corp.bluecherry.net>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The dma-contig and dma-sg memops require a valid struct device for
the DMA to be handled correctly.
Call WARN_ON and return ERR_PTR(-EINVAL) if it was NULL.
Setting the correct device pointer was forgotten in several new driver
submissions. This was caught during code review, but it really should be
caught in the code.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Always return an ERR_PTR() instead of NULL.
This makes the behavior of alloc, get_userptr and attach_dmabuf the
same.
Update the documentation in videobuf2-core.h as well.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
There is a TODO comment about the dma-buf being mapped in VIDIOC_QBUF
instead of doing it closer to when the actual DMA is going to happen
when the buffers are queued in the driver (i.e: __enqueue_in_driver).
But there is a reason to do it earlier in QBUF, and is that userspace
has no way to know if a exported dma-buf can be imported successfully
and so relies on QBUF succeeding as indication that the dma-buf mapped.
If QBUF fails, the application can fallback to another streaming I/O
method. But moving the dma-buf mapping later when queueing the buffers
can be too late for userspace to recover, since it may had dropped the
buffer(s) already when it knows that the dma-buf mapping failed.
So remove the TODO instead and change the comment to explain this.
Suggested-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
If the VIDIOC_QBUF ioctl fails due a wrong dmabuf length, it's
useful to get the invalid and minimum lengths as a debug info.
Before this patch:
vb2-core: __qbuf_dmabuf: invalid dmabuf length for plane 1
After this patch:
vb2-core: __qbuf_dmabuf: invalid dmabuf length 221248 for plane 1, minimum length 410880
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Returning -EINVAL indicates wrong arguments, but that's not the case
here.
Returning -ENOTTY is also no option, since the ioctl is implemented, but
it just is not valid for this input.
So use -ENODATA instead. This is also used elsewhere when an ioctl isn't
valid for a specific input.
In this case G/S_SELECTION returned -EINVAL for the webcam input. That
input doesn't support cropping, instead it uses ENUM_FRAMESIZES to
enumerate a list of discrete frame sizes.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The old cropcap video op is now only used to pass the pixelaspect
ratio, so rename it.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
This is part of a final push to convert all drivers to g/s_selection.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Cc: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
This is part of a final push to convert all drivers to g/s_selection.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Cc: Prabhakar Lad <prabhakar.csengg@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
This is part of a final push to convert all drivers to g/s_selection.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Cc: Prabhakar Lad <prabhakar.csengg@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
This is part of a final push to convert all drivers to g/s_selection.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
This is part of a final push to convert all drivers to g/s_selection.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
This is part of a final push to convert all drivers to g/s_selection.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
This is part of a final push to convert all drivers to g/s_selection.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Replace all calls to g/s_crop by calls to the get/set_selection pad ops.
Remove the old g/s_crop video ops since they are now no longer used.
The cropcap video op is now only used to pass pixelaspect information,
and is only needed if the pixelaspect is not 1:1.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Some targets control the ADV7180 power pin via a gpio, so add
optional support for "powerdown" pin control.
Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com>
Tested-by: Tim Harvey <tharvey@gateworks.com>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The video_unregister_device() function tests whether its argument is NULL
and then returns immediately. Thus the test around the call is not needed.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The spi_unregister_device() function tests whether its argument is NULL
and then returns immediately. Thus the test around the call is not needed.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Add support for reduced fps (i.e. 59.94 Hz instead of 60 Hz) for the
HDMI output.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The workqueue work_queue is involved in EDID (Extended Display
Identification Data) handling.
It has a single work item(&state->edid_handler) and hence
doesn't require ordering. It is not being used on a memory reclaim path.
Hence, the singlethreaded workqueue has been replaced with
the use of system_wq.
&state->edid_handler is a self requeueing work item and it has been
been sync cancelled in ad9389b_remove() to ensure that nothing is
pending when the driver is disconnected.
The unused label err_unreg has also been dropped.
Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The workqueue "work_thread" is involved in streaming the camera data.
It has a single work item(&dev->work_struct) and hence doesn't require
ordering. Also, it is not being used on a memory reclaim path.
Hence, the singlethreaded workqueue has been replaced with the use of
system_wq.
System workqueues have been able to handle high level of concurrency
for a long time now and hence it's not required to have a singlethreaded
workqueue just to gain concurrency. Unlike a dedicated per-cpu workqueue
created with create_singlethread_workqueue(), system_wq allows multiple
work items to overlap executions even on the same CPU; however, a
per-cpu workqueue doesn't have any CPU locality or global ordering
guarantee unless the target CPU is explicitly specified and thus the
increase of local concurrency shouldn't make any difference.
Work item has been flushed in sd_stop0() to ensure that there are no
pending tasks while disconnecting the driver.
Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com>
Acked-by: Tejun Heo <tj@kernel.org>
Acked-by: Frank Zago <frank@zago.net>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The workqueue "work_thread" is involved in streaming the camera data.
It has a single work item(&sd->work_struct) and hence doesn't require
ordering. Also, it is not being used on a memory reclaim path.
Hence, the singlethreaded workqueue has been replaced with the use of
system_wq.
System workqueues have been able to handle high level of concurrency
for a long time now and hence it's not required to have a singlethreaded
workqueue just to gain concurrency. Unlike a dedicated per-cpu workqueue
created with create_singlethread_workqueue(), system_wq allows multiple
work items to overlap executions even on the same CPU; however, a
per-cpu workqueue doesn't have any CPU locality or global ordering
guarantee unless the target CPU is explicitly specified and thus the
increase of local concurrency shouldn't make any difference.
Work item has been flushed in sd_stop0() to ensure that there are no
pending tasks while disconnecting the driver.
Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The workqueue "work_thread" is involved in streaming the camera data.
It has a single work item(&sd->work_struct) and hence doesn't require
ordering. Also, it is not being used on a memory reclaim path.
Hence, the singlethreaded workqueue has been replaced with the use of
system_wq.
System workqueues have been able to handle high level of concurrency
for a long time now and hence it's not required to have a singlethreaded
workqueue just to gain concurrency. Unlike a dedicated per-cpu workqueue
created with create_singlethread_workqueue(), system_wq allows multiple
work items to overlap executions even on the same CPU; however, a
per-cpu workqueue doesn't have any CPU locality or global ordering
guarantee unless the target CPU is explicitly specified and thus the
increase of local concurrency shouldn't make any difference.
Work item has been flushed in sd_stop0() to ensure that there are no
pending tasks while disconnecting the driver.
Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The workqueue "work_thread" is involved in updating the JPEG quality
of the gspca_dev. It has a single work item(&sd->work) and hence doesn't
require ordering. Also, it is not being used on a memory reclaim path.
Hence, the singlethreaded workqueue has been replaced with the use of
system_wq.
System workqueues have been able to handle high level of concurrency
for a long time now and hence it's not required to have a singlethreaded
workqueue just to gain concurrency. Unlike a dedicated per-cpu workqueue
created with create_singlethread_workqueue(), system_wq allows multiple
work items to overlap executions even on the same CPU; however, a
per-cpu workqueue doesn't have any CPU locality or global ordering
guarantee unless the target CPU is explicitly specified and thus the
increase of local concurrency shouldn't make any difference.
Work item has been flushed in sd_stop0() to ensure that there are no
pending tasks while disconnecting the driver.
Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The workqueue "workqueue" is involved in polling the pvrusb2 hardware
(pvr2_hdw).
It has a single work item(&hdw->workpoll) and hence doesn't require
ordering. Also, it is not being used on a memory reclaim path.
Hence, the singlethreaded workqueue has been replaced with the use of
system_wq.
System workqueues have been able to handle high level of concurrency
for a long time now and hence it's not required to have a singlethreaded
workqueue just to gain concurrency. Unlike a dedicated per-cpu workqueue
created with create_singlethread_workqueue(), system_wq allows multiple
work items to overlap executions even on the same CPU; however, a
per-cpu workqueue doesn't have any CPU locality or global ordering
guarantee unless the target CPU is explicitly specified and thus the
increase of local concurrency shouldn't make any difference.
Work item has been flushed in pvr2_hdw_destroy to ensure that there are no
pending tasks while disconnecting the driver.
Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
kmalloc will print enough information in case of failure.
Signed-off-by: Wolfram Sang <wsa-dev@sang-engineering.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
kmalloc will print enough information in case of failure.
Signed-off-by: Wolfram Sang <wsa-dev@sang-engineering.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
kmalloc will print enough information in case of failure.
Signed-off-by: Wolfram Sang <wsa-dev@sang-engineering.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
kmalloc will print enough information in case of failure.
Signed-off-by: Wolfram Sang <wsa-dev@sang-engineering.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
kmalloc will print enough information in case of failure.
Signed-off-by: Wolfram Sang <wsa-dev@sang-engineering.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
kmalloc will print enough information in case of failure.
Signed-off-by: Wolfram Sang <wsa-dev@sang-engineering.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
kmalloc will print enough information in case of failure.
Signed-off-by: Wolfram Sang <wsa-dev@sang-engineering.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
kmalloc will print enough information in case of failure.
Signed-off-by: Wolfram Sang <wsa-dev@sang-engineering.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
kmalloc will print enough information in case of failure.
Signed-off-by: Wolfram Sang <wsa-dev@sang-engineering.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
kmalloc will print enough information in case of failure.
Signed-off-by: Wolfram Sang <wsa-dev@sang-engineering.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
kmalloc will print enough information in case of failure.
Signed-off-by: Wolfram Sang <wsa-dev@sang-engineering.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
kmalloc will print enough information in case of failure.
Signed-off-by: Wolfram Sang <wsa-dev@sang-engineering.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
kmalloc will print enough information in case of failure.
Signed-off-by: Wolfram Sang <wsa-dev@sang-engineering.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
kmalloc will print enough information in case of failure.
Signed-off-by: Wolfram Sang <wsa-dev@sang-engineering.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
kmalloc will print enough information in case of failure.
Signed-off-by: Wolfram Sang <wsa-dev@sang-engineering.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
kmalloc will print enough information in case of failure.
Signed-off-by: Wolfram Sang <wsa-dev@sang-engineering.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
kmalloc will print enough information in case of failure.
Signed-off-by: Wolfram Sang <wsa-dev@sang-engineering.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
kmalloc will print enough information in case of failure.
Signed-off-by: Wolfram Sang <wsa-dev@sang-engineering.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
kmalloc will print enough information in case of failure.
Signed-off-by: Wolfram Sang <wsa-dev@sang-engineering.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
kmalloc will print enough information in case of failure.
Signed-off-by: Wolfram Sang <wsa-dev@sang-engineering.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
kmalloc will print enough information in case of failure.
Signed-off-by: Wolfram Sang <wsa-dev@sang-engineering.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
kmalloc will print enough information in case of failure.
Signed-off-by: Wolfram Sang <wsa-dev@sang-engineering.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
kmalloc will print enough information in case of failure.
Signed-off-by: Wolfram Sang <wsa-dev@sang-engineering.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
kmalloc will print enough information in case of failure.
Signed-off-by: Wolfram Sang <wsa-dev@sang-engineering.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
kmalloc will print enough information in case of failure.
Signed-off-by: Wolfram Sang <wsa-dev@sang-engineering.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
kmalloc will print enough information in case of failure.
Signed-off-by: Wolfram Sang <wsa-dev@sang-engineering.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
kmalloc will print enough information in case of failure.
Signed-off-by: Wolfram Sang <wsa-dev@sang-engineering.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
kmalloc will print enough information in case of failure.
Signed-off-by: Wolfram Sang <wsa-dev@sang-engineering.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The venc_common_if structures are never modified, so declare them as const.
Done with the help of Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Currently, the hardware is not given a complete initial
configuration.
In order to fix this, this rather large commit reworks
standard, frame format and input configuration. While
at it, we introduce proper functions to configure
each parameter, and as a result the code is a bit cleaner.
Reported-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The SYCC Y'CbCr encoding is identical to the 601 encoding. Since the
SYCC define is about to be removed for use in the kernel we need to
drop it in the TPG code as well.
This patch also adds a 4th decimal to the 601 conversion matrix.
That was specified by the sYCC spec and it makes sense to use this
across the board.
[mchehab@s-opensource.com: fix conflicts with LaTeX math expression patch]
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
This encoding is identical to the 601 encoding. The old duplicate
SYCC define is about to be removed for use in the kernel, so remove
its use in vivid first.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
This adds support for AD5820 autofocus coil, found for example in
Nokia N900 smartphone.
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Acked-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The s5p-tv driver has been replaced by the exynos drm driver for quite a
long time now. Remove this driver to avoid having duplicate drivers,
of which this one is considered dead code by Samsung.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The sh_mobile_csi2 isn't used anymore (was it ever?), so remove it.
Especially since the soc-camera framework is being deprecated.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Some touch controllers send out touch data in a similar way to a
greyscale frame grabber.
Add new device type VFL_TYPE_TOUCH:
- This uses a new device prefix v4l-touch for these devices, to stop
generic capture software from treating them as webcams. Otherwise,
touch is treated similarly to video capture.
- Add V4L2_INPUT_TYPE_TOUCH
- Add MEDIA_INTF_T_V4L_TOUCH
- Add V4L2_CAP_TOUCH to indicate device is a touch device
Add formats:
- V4L2_TCH_FMT_DELTA_TD16 for signed 16-bit touch deltas
- V4L2_TCH_FMT_DELTA_TD08 for signed 16-bit touch deltas
- V4L2_TCH_FMT_TU16 for unsigned 16-bit touch data
- V4L2_TCH_FMT_TU08 for unsigned 8-bit touch data
This support will be used by:
- Atmel maXTouch (atmel_mxt_ts)
- Synaptics RMI4.
- sur40
Signed-off-by: Nick Dyer <nick@shmanahar.org>
Tested-by: Chris Healy <cphealy@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The primary reason for this change is to prepare for Gen3 support where
there will be more then one possible video source. Each source will have
its own media bus format and code, so it needs to be moved from the per
device structure to a structure used to represent an individual
connection to a video source.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The original drivers code to find a subdevice by looking in the DT grpah
and how the callbacks to the v4l2 async bind framework where poorly
written. The most obvious example of badness was the duplication of data
in the struct rvin_graph_entity.
This patch removes the data duplication, simplifies the parsing of the
DT graph and add checks to the v4l2 callbacks.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The check for if the specific pixelformat is supported on the current
chip should happen in VIDIOC_S_FMT and VIDIOC_TRY_FMT and not when we
try to setup the hardware for streaming.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
This is done in preparation for Gen3 support where media controller
support will be mandatory for the driver.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Fix a error from the original driver where v4l2_device_call_until_err()
where used for the pad specific v4l2 operation set_fmt. Also fix up the
error path from this fix so if there is an error it will be propagated
to the caller.
The error path label have also been renamed as a result from a
nitpicking review comment since we are fixing other issues here.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Fix a error from the original driver where the wrong error code is
returned if the driver fails to get a IRQ number from
platform_get_irq().
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
When Gen3 support is added to the driver more then one possible video
source entity will be possible. Knowing that the name entity is a bad
one, rename it to digital since it will deal with the digital input
source.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Align style with the rest of the driver.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The cec_get_edid_spa_location() function did not verify that the IEEE
identifier in the Vendor Specific Data Block matched the HDMI-LLC
identifier. This could result in the wrong VSDB block being returned.
For example, for HDMI 2.0 EDIDs there is also a HDMI Forum VSDB.
So check the IEEE identifier as well.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
This fixes this kbuild test robot error:
tree: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git master
head: 329f415291
commit: c1023ba74f [media] drivers/media/platform/Kconfig: fix VIDEO_MEDIATEK_VCODEC dependency
config: m32r-allyesconfig (attached as .config)
compiler: m32r-linux-gcc (GCC) 4.9.0
reproduce:
wget https://git.kernel.org/cgit/linux/kernel/git/wfg/lkp-tests.git/plain/sbin/make.cross -O ~/bin/make.cross
chmod +x ~/bin/make.cross
git checkout c1023ba74f
# save the attached .config to linux build tree
make.cross ARCH=m32r
All errors (new ones prefixed by >>):
drivers/media/v4l2-core/videobuf2-dma-contig.c: In function 'vb2_dc_get_userptr':
>> >> drivers/media/v4l2-core/videobuf2-dma-contig.c:486:2: error: implicit declaration of function 'dma_get_cache_alignment' [-Werror=implicit-function-declaration]
unsigned long dma_align = dma_get_cache_alignment();
^
cc1: some warnings being treated as errors
This driver depends on HAS_DMA for dma_get_cache_alignment().
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Add driver for the Image Sensor Controller. It manages
incoming data from a parallel based CMOS/CCD sensor.
It has an internal image processor, also integrates a
triple channel direct memory access controller master
interface.
Signed-off-by: Songjun Wu <songjun.wu@microchip.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJXp93XAAoJEHm+PkMAQRiGzZUH/RnuppC032UBAYfF8mut4OQ9
0rY08q92u+FQ0VtJ+JhCJ7sd3/X1S6y4imqaasEl+iHGqyJvvVcGTdK5JGirLa4x
DZk8d7SW2zIO0c6U6ccAqRg8/ZivPUcpOD/CxWgko6OF0HjOdeFx4Bi8kyLM1y/3
Jfv1JAMknKva8AnZwLR159m7k7WEqsvAPtSYpvxZNloaSnnDiMmyvareOVwlzA28
5MXkf4oGiS2FsV9W4s3nFriC9sAoGcVFe6OkbiwO9K2mSq/+ncEC60elS3lvrciP
Nm41SclpGNjf40/22/kcb1hPSKPAiTkpmyLmjQ3ZtrHL0DunYBCb6SdmgYS3yPY=
=Bn4Y
-----END PGP SIGNATURE-----
Merge tag 'v4.8-rc1' into patchwork
Linux 4.8-rc1
* tag 'v4.8-rc1': (6093 commits)
Linux 4.8-rc1
block: rename bio bi_rw to bi_opf
target: iblock_execute_sync_cache() should use bio_set_op_attrs()
mm: make __swap_writepage() use bio_set_op_attrs()
block/mm: make bdev_ops->rw_page() take a bool for read/write
fs: return EPERM on immutable inode
ramoops: use persistent_ram_free() instead of kfree() for freeing prz
ramoops: use DT reserved-memory bindings
NTB: ntb_hw_intel: use local variable pdev
NTB: ntb_hw_intel: show BAR size in debugfs info
ntb_test: Add a selftest script for the NTB subsystem
ntb_perf: clear link_is_up flag when the link goes down.
ntb_pingpong: Add a debugfs file to get the ping count
ntb_tool: Add link status and files to debugfs
ntb_tool: Postpone memory window initialization for the user
ntb_perf: Wait for link before running test
ntb_perf: Return results by reading the run file
ntb_perf: Improve thread handling to increase robustness
ntb_perf: Schedule based on time not on performance
ntb_transport: Check the number of spads the hardware supports
...
Sometimes, the USB pipe could enter into a stalled state,
and may need a reset to rework.
Add such logic.
[mchehab@osg.samsung.com: ported from Android's source:
3a322adc00%5E%21]
Signed-off-by: Terry Heo <terryheo@google.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=odtg
-----END PGP SIGNATURE-----
Merge tag 'media/v4.8-5' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media DocBook removal and some fixups from Mauro Carvalho Chehab:
- removal of the media DocBook (since it's all in Sphinx now)
- videobuf2: Fix an allocation regression
- a few fixes related to the CEC drivers
* tag 'media/v4.8-5' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
[media] cec: fix off-by-one memset
[media] staging: add MEDIA_SUPPORT dependency
[media] vivid: don't handle CEC_MSG_SET_STREAM_PATH
[media] media: adv7180: Fix broken interrupt register access
[media] vb2: Fix allocation size of dma_parms
[media] vim2m: copy the other colorspace-related fields as well
[media] adv7511: fix VIC autodetect
doc-rst: Remove the media docbook
The addition of jump label support in dynamic_debug caused an unexpected
warning in exactly one file in the kernel:
drivers/media/dvb-frontends/cxd2841er.c: In function 'cxd2841er_tune_tc':
include/linux/dynamic_debug.h:134:3: error: 'carrier_offset' may be used uninitialized in this function [-Werror=maybe-uninitialized]
__dynamic_dev_dbg(&descriptor, dev, fmt, \
^~~~~~~~~~~~~~~~~
drivers/media/dvb-frontends/cxd2841er.c:3177:11: note: 'carrier_offset' was declared here
int ret, carrier_offset;
^~~~~~~~~~~~~~
The problem seems to be that the compiler gets confused by the extra
conditionals in static_branch_unlikely, to the point where it can no
longer keep track of which branches have already been taken, and it
doesn't realize that this variable is now always initialized when it
gets used.
I have done lots of randconfig kernel builds and could not find any
other file with this behavior, so I assume it's a rare enough glitch
that we don't need to change the jump label support but instead just
work around the warning in the driver.
To achieve that, I'm moving the check for the return value into the
switch() statement, which is an obvious transformation, but is enough to
un-confuse the compiler here. The resulting code is not as nice to
read, but at least we retain the behavior of warning if it gets changed
to actually access an uninitialized carrier offset value in the future.
Link: http://lkml.kernel.org/r/20160713204342.1221511-1-arnd@arndb.de
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Abylay Ospan <aospan@netup.ru>
Cc: Sergey Kozlov <serjk@netup.ru>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Jason Baron <jbaron@akamai.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The dma-mapping core and the implementations do not change the DMA
attributes passed by pointer. Thus the pointer can point to const data.
However the attributes do not have to be a bitfield. Instead unsigned
long will do fine:
1. This is just simpler. Both in terms of reading the code and setting
attributes. Instead of initializing local attributes on the stack
and passing pointer to it to dma_set_attr(), just set the bits.
2. It brings safeness and checking for const correctness because the
attributes are passed by value.
Semantic patches for this change (at least most of them):
virtual patch
virtual context
@r@
identifier f, attrs;
@@
f(...,
- struct dma_attrs *attrs
+ unsigned long attrs
, ...)
{
...
}
@@
identifier r.f;
@@
f(...,
- NULL
+ 0
)
and
// Options: --all-includes
virtual patch
virtual context
@r@
identifier f, attrs;
type t;
@@
t f(..., struct dma_attrs *attrs);
@@
identifier r.f;
@@
f(...,
- NULL
+ 0
)
Link: http://lkml.kernel.org/r/1468399300-5399-2-git-send-email-k.kozlowski@samsung.com
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: Vineet Gupta <vgupta@synopsys.com>
Acked-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no>
Acked-by: Mark Salter <msalter@redhat.com> [c6x]
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> [cris]
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> [drm]
Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com>
Acked-by: Joerg Roedel <jroedel@suse.de> [iommu]
Acked-by: Fabien Dessenne <fabien.dessenne@st.com> [bdisp]
Reviewed-by: Marek Szyprowski <m.szyprowski@samsung.com> [vb2-core]
Acked-by: David Vrabel <david.vrabel@citrix.com> [xen]
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> [xen swiotlb]
Acked-by: Joerg Roedel <jroedel@suse.de> [iommu]
Acked-by: Richard Kuo <rkuo@codeaurora.org> [hexagon]
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k]
Acked-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> [s390]
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no> [avr32]
Acked-by: Vineet Gupta <vgupta@synopsys.com> [arc]
Acked-by: Robin Murphy <robin.murphy@arm.com> [arm64 and dma-iommu]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Merge drm updates from Dave Airlie:
"This is the main drm pull request for 4.8.
I'm down with a cold at the moment so hopefully this isn't in too bad
a state, I finished pulling stuff last week mostly (nouveau fixes just
went in today), so only this message should be influenced by illness.
Apologies to anyone who's major feature I missed :-)
Core:
Lockless GEM BO freeing
Non-blocking atomic work
Documentation changes (rst/sphinx)
Prep for new fencing changes
Simple display helpers
Master/auth changes
Register/unregister rework
Loads of trivial patches/fixes.
New stuff:
ARM Mali display driver (not the 3D chip)
sii902x RGB->HDMI bridge
Panel:
Support for new panels
Improved backlight support
Bridge:
Convert ADV7511 to bridge driver
ADV7533 support
TC358767 (DSI/DPI to eDP) encoder chip support
i915:
BXT support enabled by default
GVT-g infrastructure
GuC command submission and fixes
BXT workarounds
SKL/BKL workarounds
Demidlayering device registration
Thundering herd fixes
Missing pci ids
Atomic updates
amdgpu/radeon:
ATPX improvements for better dGPU power control on PX systems
New power features for CZ/BR/ST
Pipelined BO moves and evictions in TTM
GPU scheduler improvements
GPU reset improvements
Overclocking on dGPUs with amdgpu
Polaris powermanagement enabled
nouveau:
GK20A/GM20B volt and clock improvements.
Initial support for GP100/GP104 GPUs, GP104 will not yet support
acceleration due to NVIDIA having not released firmware for them as of yet.
exynos:
Exynos5433 SoC with IOMMU support.
vc4:
Shader validation for branching
imx-drm:
Atomic mode setting conversion
Reworked DMFC FIFO allocation
External bridge support
analogix-dp:
RK3399 eDP support
Lots of fixes.
rockchip:
Lots of small fixes.
msm:
DT bindings cleanups
Shrinker and madvise support
ASoC HDMI codec support
tegra:
Host1x driver cleanups
SOR reworking for DP support
Runtime PM support
omapdrm:
PLL enhancements
Header refactoring
Gamma table support
arcgpu:
Simulator support
virtio-gpu:
Atomic modesetting fixes.
rcar-du:
Misc fixes.
mediatek:
MT8173 HDMI support
sti:
ASOC HDMI codec support
Minor fixes
fsl-dcu:
Suspend/resume support
Bridge support
amdkfd:
Minor fixes.
etnaviv:
Enable GPU clock gating
hisilicon:
Vblank and other fixes"
* tag 'drm-for-v4.8' of git://people.freedesktop.org/~airlied/linux: (1575 commits)
drm/nouveau/gr/nv3x: fix instobj write offsets in gr setup
drm/nouveau/acpi: fix lockup with PCIe runtime PM
drm/nouveau/acpi: check for function 0x1B before using it
drm/nouveau/acpi: return supported DSM functions
drm/nouveau/acpi: ensure matching ACPI handle and supported functions
drm/nouveau/fbcon: fix font width not divisible by 8
drm/amd/powerplay: remove enable_clock_power_gatings_tasks from initialize and resume events
drm/amd/powerplay: move clockgating to after ungating power in pp for uvd/vce
drm/amdgpu: add query device id and revision id into system info entry at CGS
drm/amdgpu: add new definition in bif header
drm/amd/powerplay: rename smum header guards
drm/amdgpu: enable UVD context buffer for older HW
drm/amdgpu: fix default UVD context size
drm/amdgpu: fix incorrect type of info_id
drm/amdgpu: make amdgpu_cgs_call_acpi_method as static
drm/amdgpu: comment out unused defaults_staturn_pro static const structure to fix the build
drm/amdgpu: enable UVD VM only on polaris
drm/amdgpu: increase timeout of IB test
drm/amdgpu: add destroy session when generate VCE destroy msg.
drm/amd: fix deadlock of job_list_lock V2
...
Driver updates for ARM SoCs.
A slew of changes this release cycle. The reset driver tree, that we merge
through arm-soc for historical reasons, is also sizable this time around.
Among the changes:
- clps711x: Treewide changes to compatible strings, merged here for simplicity.
- Qualcomm: SCM firmware driver cleanups, move to platform driver
- ux500: Major cleanups, removal of old mach-specific infrastructure.
- Atmel external bus memory driver
- Move of brcmstb platform to the rest of bcm
- PMC driver updates for tegra, various fixes and improvements
- Samsung platform driver updates to support 64-bit Exynos platforms
- Reset controller cleanups moving to devm_reset_controller_register() APIs
- Reset controller driver for Amlogic Meson
- Reset controller driver for Hisilicon hi6220
- ARM SCPI power domain support
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=O8+y
-----END PGP SIGNATURE-----
Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC driver updates from Olof Johansson:
"Driver updates for ARM SoCs.
A slew of changes this release cycle. The reset driver tree, that we
merge through arm-soc for historical reasons, is also sizable this
time around.
Among the changes:
- clps711x: Treewide changes to compatible strings, merged here for simplicity.
- Qualcomm: SCM firmware driver cleanups, move to platform driver
- ux500: Major cleanups, removal of old mach-specific infrastructure.
- Atmel external bus memory driver
- Move of brcmstb platform to the rest of bcm
- PMC driver updates for tegra, various fixes and improvements
- Samsung platform driver updates to support 64-bit Exynos platforms
- Reset controller cleanups moving to devm_reset_controller_register() APIs
- Reset controller driver for Amlogic Meson
- Reset controller driver for Hisilicon hi6220
- ARM SCPI power domain support"
* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (100 commits)
ARM: ux500: consolidate base platform files
ARM: ux500: move soc_id driver to drivers/soc
ARM: ux500: call ux500_setup_id later
ARM: ux500: consolidate soc_device code in id.c
ARM: ux500: remove cpu_is_u* helpers
ARM: ux500: use CLK_OF_DECLARE()
ARM: ux500: move l2x0 init to .init_irq
mfd: db8500 stop passing around platform data
ASoC: ab8500-codec: remove platform data based probe
ARM: ux500: move ab8500_regulator_plat_data into driver
ARM: ux500: remove unused regulator data
soc: raspberrypi-power: add CONFIG_OF dependency
firmware: scpi: add CONFIG_OF dependency
video: clps711x-fb: Changing the compatibility string to match with the smallest supported chip
input: clps711x-keypad: Changing the compatibility string to match with the smallest supported chip
pwm: clps711x: Changing the compatibility string to match with the smallest supported chip
serial: clps711x: Changing the compatibility string to match with the smallest supported chip
irqchip: clps711x: Changing the compatibility string to match with the smallest supported chip
clocksource: clps711x: Changing the compatibility string to match with the smallest supported chip
clk: clps711x: Changing the compatibility string to match with the smallest supported chip
...
vivid shouldn't process the CEC_MSG_SET_STREAM_PATH message: this will confuse
userspace follower code because it isn't aware of the state change of becoming
an active source.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Access to the interrupt page registers has been broken since at least
commit 3999e5d01d ("[media] adv7180: Do implicit register paging").
That commit forgot to add the interrupt page number to the register
defines.
Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com>
Tested-by: Tim Harvey <tharvey@gateworks.com>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
When allocating memory to hold the device dma parameters in
vb2_dma_contig_set_max_seg_size(), the requested size is by mistake only
the size of a pointer. Request the correct size instead.
Fixes: 3f03396918 ("media: vb2-dma-contig: add helper for setting dma max seg size")
Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net>
Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The xfer_func, ycbcr_enc and quantization fields should also be copied from
output to capture format.
Since this driver serves as example code it is important that this is handled
correctly.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The adv7511 will automatically fill in the VIC code in the AVI InfoFrame
based on the timings of the incoming pixelport signals.
However, to have this work correctly it needs to specify the fps
value in a register. After doing this the proper VIC code is filled in.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=CN+v
-----END PGP SIGNATURE-----
Merge tag 'media/v4.8-4' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media documentation updates from Mauro Carvalho Chehab:
"This patch series does the conversion of all media documentation stuff
to Restrutured Text markup format and add them to the
Documentation/index.rst file.
The media documentation was grouped into 4 books:
- media uAPI
- media kAPI
- V4L driver-specific documentation
- DVB driver-specific documentation
It also contains several documentation improvements and one fixup
patch for a core issue with cropcap.
PS. After this patch series, the media DocBook is deprecated and
should be removed. I'll add such patch on a future pull request"
* tag 'media/v4.8-4' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (322 commits)
[media] cx23885-cardlist.rst: add a new card
[media] doc-rst: add some needed escape codes
[media] doc-rst: kapi: use :c:func: instead of :cpp:func
doc-rst: kernel-doc: fix a change introduced by mistake
[media] v4l2-ioctl.h add debug info for struct v4l2_ioctl_ops
[media] dvb_ringbuffer.h: some documentation improvements
[media] v4l2-ctrls.h: fully document the header file
[media] doc-rst: Fix some typedef ugly warnings
[media] doc-rst: reorganize the kAPI v4l2 chapters
[media] rename v4l2-framework.rst to v4l2-intro.rst
[media] move V4L2 clocks to a separate .rst file
[media] v4l2-fh.rst: add cross references and markups
[media] v4l2-fh.rst: add fh contents from v4l2-framework.rst
[media] v4l2-fh.h: add documentation for it
[media] v4l2-event.rst: add cross-references and markups
[media] v4l2-event.h: document all functions
[media] v4l2-event.rst: add text from v4l2-framework.rst
[media] v4l2-framework.rst: remove videobuf quick chapter
[media] v4l2-dev: add cross-references and improve markup
[media] doc-rst: move v4l2-dev doc to a separate file
...
Pull networking updates from David Miller:
1) Unified UDP encapsulation offload methods for drivers, from
Alexander Duyck.
2) Make DSA binding more sane, from Andrew Lunn.
3) Support QCA9888 chips in ath10k, from Anilkumar Kolli.
4) Several workqueue usage cleanups, from Bhaktipriya Shridhar.
5) Add XDP (eXpress Data Path), essentially running BPF programs on RX
packets as soon as the device sees them, with the option to mirror
the packet on TX via the same interface. From Brenden Blanco and
others.
6) Allow qdisc/class stats dumps to run lockless, from Eric Dumazet.
7) Add VLAN support to b53 and bcm_sf2, from Florian Fainelli.
8) Simplify netlink conntrack entry layout, from Florian Westphal.
9) Add ipv4 forwarding support to mlxsw spectrum driver, from Ido
Schimmel, Yotam Gigi, and Jiri Pirko.
10) Add SKB array infrastructure and convert tun and macvtap over to it.
From Michael S Tsirkin and Jason Wang.
11) Support qdisc packet injection in pktgen, from John Fastabend.
12) Add neighbour monitoring framework to TIPC, from Jon Paul Maloy.
13) Add NV congestion control support to TCP, from Lawrence Brakmo.
14) Add GSO support to SCTP, from Marcelo Ricardo Leitner.
15) Allow GRO and RPS to function on macsec devices, from Paolo Abeni.
16) Support MPLS over IPV4, from Simon Horman.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1622 commits)
xgene: Fix build warning with ACPI disabled.
be2net: perform temperature query in adapter regardless of its interface state
l2tp: Correctly return -EBADF from pppol2tp_getname.
net/mlx5_core/health: Remove deprecated create_singlethread_workqueue
net: ipmr/ip6mr: update lastuse on entry change
macsec: ensure rx_sa is set when validation is disabled
tipc: dump monitor attributes
tipc: add a function to get the bearer name
tipc: get monitor threshold for the cluster
tipc: make cluster size threshold for monitoring configurable
tipc: introduce constants for tipc address validation
net: neigh: disallow transition to NUD_STALE if lladdr is unchanged in neigh_update()
MAINTAINERS: xgene: Add driver and documentation path
Documentation: dtb: xgene: Add MDIO node
dtb: xgene: Add MDIO node
drivers: net: xgene: ethtool: Use phy_ethtool_gset and sset
drivers: net: xgene: Use exported functions
drivers: net: xgene: Enable MDIO driver
drivers: net: xgene: Add backward compatibility
drivers: net: phy: xgene: Add MDIO driver
...
* topic/docs-next: (322 commits)
[media] cx23885-cardlist.rst: add a new card
[media] doc-rst: add some needed escape codes
[media] doc-rst: kapi: use :c:func: instead of :cpp:func
doc-rst: kernel-doc: fix a change introduced by mistake
[media] v4l2-ioctl.h add debug info for struct v4l2_ioctl_ops
[media] dvb_ringbuffer.h: some documentation improvements
[media] v4l2-ctrls.h: fully document the header file
[media] doc-rst: Fix some typedef ugly warnings
[media] doc-rst: reorganize the kAPI v4l2 chapters
[media] rename v4l2-framework.rst to v4l2-intro.rst
[media] move V4L2 clocks to a separate .rst file
[media] v4l2-fh.rst: add cross references and markups
[media] v4l2-fh.rst: add fh contents from v4l2-framework.rst
[media] v4l2-fh.h: add documentation for it
[media] v4l2-event.rst: add cross-references and markups
[media] v4l2-event.h: document all functions
[media] v4l2-event.rst: add text from v4l2-framework.rst
[media] v4l2-framework.rst: remove videobuf quick chapter
[media] v4l2-dev: add cross-references and improve markup
[media] doc-rst: move v4l2-dev doc to a separate file
...
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=mrOW
-----END PGP SIGNATURE-----
Merge tag 'media/v4.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- new framework support for HDMI CEC and remote control support
- new encoding codec driver for Mediatek SoC
- new frontend driver: helene tuner
- added support for NetUp almost universal devices, with supports
DVB-C/S/S2/T/T2 and ISDB-T
- the mn88472 frontend driver got promoted from staging
- a new driver for RCar video input
- some soc_camera legacy drivers got removed: timb, omap1, mx2, mx3
- lots of driver cleanups, improvements and fixups
* tag 'media/v4.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (377 commits)
[media] cec: always check all_device_types and features
[media] cec: poll should check if there is room in the tx queue
[media] vivid: support monitor all mode
[media] cec: fix test for unconfigured adapter in main message loop
[media] cec: limit the size of the transmit queue
[media] cec: zero unused msg part after msg->len
[media] cec: don't set fh to NULL in CEC_TRANSMIT
[media] cec: clear all status fields before transmit and always fill in sequence
[media] cec: CEC_RECEIVE overwrote the timeout field
[media] cxd2841er: Reading SNR for DVB-C added
[media] cxd2841er: Reading BER and UCB for DVB-C added
[media] cxd2841er: fix switch-case for DVB-C
[media] cxd2841er: fix signal strength scale for ISDB-T
[media] cxd2841er: adjust the dB scale for DVB-C
[media] cxd2841er: provide signal strength for DVB-C
[media] cxd2841er: fix BER report via DVBv5 stats API
[media] mb86a20s: apply mask to val after checking for read failure
[media] airspy: fix error logic during device register
[media] s5p-cec/TODO: add TODO item
[media] cec/TODO: drop comment about sphinx documentation
...
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJXlRXSAAoJEHm+PkMAQRiGG/gH/0Z8O4zWOsrwO+X1mRToRDBH
joFOjAmCVe83T1VpF5LYNB+9+owL/dEDt6+ZIswnhH7AfQPjs4RqwS4PcuMbCDVO
+mDm0PmfcKaYcQZrB2Z2OwIzRNnfCTVcsDPhIHwuIHk0m4z/xuGZonD8KoAj0+tO
3yJF6sbE1KubDVjOb+lmZZSP3cXA0pDXrNhkYhE4Tsr8fiihGjeXSNJ8t2zPLjxo
W3MPqo0rzDvQsOwoF4TWHHagVaFSJlhLBBgqu33fI7uO3jtfQD2G8wG68JCND1j3
qbMoBfTLFV/yQmSIJUt0Wv1axaCcwnjpweEB35A/GEeZ0mNB1rDdoBeI1eKEQkc=
=DGFC
-----END PGP SIGNATURE-----
Backmerge tag 'v4.7' into drm-next
Linux 4.7
As requested by Daniel Vetter as the conflicts were getting messy.
Better document a note on this header.
While here, better format dvb_ringbuffer_pkt_read_user()
to adjust it to CodingStyle.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Add documentation for v4l2-dev.h, and put it at v4l2-framework.rst,
where struct video_device is currently documented.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
This header were poorly documented, and weren't using the
kernel-doc format. Document everything but the macros using
the right format.
While here, also fix the other comments to match the
Linux CodingStyle.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Fix all remaining media warnings with ReST that are fixable
without changing at the Sphinx code.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* patchwork: (1492 commits)
[media] cec: always check all_device_types and features
[media] cec: poll should check if there is room in the tx queue
[media] vivid: support monitor all mode
[media] cec: fix test for unconfigured adapter in main message loop
[media] cec: limit the size of the transmit queue
[media] cec: zero unused msg part after msg->len
[media] cec: don't set fh to NULL in CEC_TRANSMIT
[media] cec: clear all status fields before transmit and always fill in sequence
[media] cec: CEC_RECEIVE overwrote the timeout field
[media] cxd2841er: Reading SNR for DVB-C added
[media] cxd2841er: Reading BER and UCB for DVB-C added
[media] cxd2841er: fix switch-case for DVB-C
[media] cxd2841er: fix signal strength scale for ISDB-T
[media] cxd2841er: adjust the dB scale for DVB-C
[media] cxd2841er: provide signal strength for DVB-C
[media] cxd2841er: fix BER report via DVBv5 stats API
[media] mb86a20s: apply mask to val after checking for read failure
[media] airspy: fix error logic during device register
[media] s5p-cec/TODO: add TODO item
[media] cec/TODO: drop comment about sphinx documentation
...
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Just pass the transmitted CEC message to all CEC adapters.
This implements the Monitor All mode for vivid.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
On mips and parisc:
drivers/bluetooth/btwilink.c: In function 'ti_st_open':
drivers/bluetooth/btwilink.c:174:21: warning: overflow in implicit constant conversion [-Woverflow]
hst->reg_status = -EINPROGRESS;
drivers/nfc/nfcwilink.c: In function 'nfcwilink_open':
drivers/nfc/nfcwilink.c:396:31: warning: overflow in implicit constant conversion [-Woverflow]
drv->st_register_cb_status = -EINPROGRESS;
There are actually two issues:
1. Whether "char" is signed or unsigned depends on the architecture.
As the completion callback data is used to pass a (negative) error
code, it should always be signed.
2. EINPROGRESS is 150 on mips, 245 on parisc.
Hence -EINPROGRESS doesn't fit in a signed 8-bit number.
Change the callback status from "char" to "int" to fix these.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Acked-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
The conversion from DocBook required some fixes:
- Now, the C files with the exported symbols also need to be
added. So, all headers need to be included twice: one to
get the structs/enums/.. and another one for the functions;
- Notes should use the ReST tag, as kernel-doc doesn't
recognizes it anymore;
- Identation needs to be fixed, as ReST uses it to identify
when a format "tag" ends.
- Fix the cross-references at the media controller description.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Move the contents of the media section at
DocBooks/DocBook/device-drivers.tmpl to a new ReST book.
For now, the contents is kept as-is. Next patches will fix
the warnings and add cross-references that were removed due to
the conversion.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Now driver returns correct values for DVB-C:
SNR (in dB)
[mchehab@s-opensource.com: fix a new function to be static]
Signed-off-by: Abylay Ospan <aospan@netup.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
now driver returns correct values for DVB-C:
BER (post_bit_count and post_bit_error values)
UCB (count of uncorrected errors)
also, some code cleanup was done - checkpatch.pl now is happy
Signed-off-by: Abylay Ospan <aospan@netup.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
DVB-C should use cxd2841er_read_agc_gain_c() to get the gain. The same
function is used for all DVB-C annex delivery systems.
Signed-off-by: Abylay Ospan <aospan@netup.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The scale for ISDB-T was wrong too: it was inverted, and
on a relative scale.
Use a linear interpolation to make it look better.
The formula was empirically determined, using 3 frequencies
(175 MHz, 410 MHz and 800 MHz), measuring from -50dBm to
-12dBm in steps of 0.5dB.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Instead of using a relative frequency range, calibrate it to
show the results in dB. The callibration was done getting
samples with a signal generated from -50dBm to -12dBm,
incremented in steps of 0.5 dB, using 3 frequencies:
175 MHz, 410 MHz and 800 MHz. The modulated signal was
using QAM64, and it was used a linear interpolation of all
the results.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Currently, there's no stats for DVB-C. Let's at least return
signal strength. The scale is different than on DVB-T, so let's
use a relative scale, for now.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
What userspace expects is to receive both bit_error and bit_count
counters. So, instead of doing the division at the Kernel,
return the counters for userspace to handle it the way it
wants.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Fix a memory leak on probe error of the airspy usb device driver.
The problem is triggered when more than 64 usb devices register with
v4l2 of type VFL_TYPE_SDR or VFL_TYPE_SUBDEV.
The memory leak is caused by the probe function of the airspy driver
mishandeling errors and not freeing the corresponding control structures
when an error occours registering the device to v4l2 core.
A badusb device can emulate 64 of these devices, and then through
continual emulated connect/disconnect of the 65th device, cause the
kernel to run out of RAM and crash the kernel, thus causing a local DOS
vulnerability.
Fixes CVE-2016-5400
Signed-off-by: James Patrick-Evans <james@jmp-e.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: stable@vger.kernel.org # 3.17+
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Appling the mask 0x0f to the immediate return of the call to
mb86a20s_readreg will always result in a positive value, meaning that the
check of ret < 0 will never work. Instead, check for a -ve return value
first, and then mask val with 0x0f.
Kudos to Mauro Carvalho Chehab for spotting the mistake in my original fix.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
This patch addresses CVE-2016-5400, a local DOS vulnerability caused by
a memory leak in the airspy usb device driver.
The vulnerability is triggered when more than 64 usb devices register
with v4l2 of type VFL_TYPE_SDR or VFL_TYPE_SUBDEV.A badusb device can
emulate 64 of these devices then through continual emulated
connect/disconnect of the 65th device, cause the kernel to run out of
RAM and crash the kernel.
The vulnerability exists in kernel versions from 3.17 to current 4.7.
The memory leak is caused by the probe function of the airspy driver
mishandeling errors and not freeing the corresponding control structures
when an error occours registering the device to v4l2 core.
Signed-off-by: James Patrick-Evans <james@jmp-e.com>
Cc: stable@vger.kernel.org # Up to Kernel 3.17
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Fix typo in vivid that caused all HDMI outputs to have the same
physical address.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
When calculate OUTPUT buffer size in vidioc_try_fmt, it will
add more size hw need in each plane.
But in mtk_vcodec_enc_set_default_params, it do not add
same size in each plane.
This makes v4l2-compliance test fail.
This patch fix the issue.
Signed-off-by: Tiffany Lin <tiffany.lin@mediatek.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The newly added mtk-vcodec driver produces a number of warnings in an
ARM allmodconfig build, mainly since it assumes that dma_addr_t is
32-bit wide:
mtk-vcodec/venc/venc_vp8_if.c: In function 'vp8_enc_alloc_work_buf':
mtk-vcodec/venc/venc_vp8_if.c:212:191: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast]
mtk-vcodec/venc/venc_h264_if.c: In function 'h264_enc_alloc_work_buf':
mtk-vcodec/venc/venc_h264_if.c:297:190: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast]
This rearranges the format strings and type casts to what they should
have been in order to avoid the warnings. e0f80d8d62 ("[media]
mtk-vcodec: fix two compiler warnings") fixed some of the problems that
were introduced at the same time, but missed two others.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Instead of hardcoding a timeout, let userspace change it dynamically
by adding a s_timeout ops.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The redrat3 sends an usb packet to the host either when the minimum pause
or the timeout occurs, so we can always add a trailing space in our
processing.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
LIRC_SET_SEND_CARRIER should return 0 on success or -errno.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
When s_tx_mask is given an invalid bitmask, the number of transmitters
should be returned. See the LIRC_SET_TRANSMITTER_MASK lirc ioctl
documentation.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
