This commit provides a rudimentary Makefile that runs a 10-minute
rcutorture test on scenario TREE01. This must be run on a system capable
of spawning virtual machines and with everything installed to permit
building Linux kernels.
Reported-by: Shuah Khan <shuah@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
This commit causes both kvm-find-errors.sh and kvm-recheck.sh to provide
an exit status based on whether or not errors were located. In the
case of kvm-recheck.sh, this will be the error status of the last run.
This change allows these commands to be used in scripting and Makefiles
to automatically report failed rcutorture runs.
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
jitter.sh currently does not add CPU0 to the list of CPUs for adding of
jitter. Let us add it to this list even when it is not hot-pluggable.
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
The rcutorture jitter.sh script selects a random CPU but does not check
if it is offline or online. This leads to taskset errors many times. On
my machine, hyper threading is disabled so half the cores are offline
causing taskset errors a lot of times. Let us fix this by checking from
only the online CPUs on the system.
Cc: rcu@vger.kernel.org
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
Right now test_tunnel.sh always exits with success even if some
of the subtests fail. Since the output is very verbose, it's
hard to spot the issues with subtests. Let's fail the script
if any subtest fails.
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
I was really surprised that the IPv6 mtu exception followed by redirect
test was passing as nothing about the code suggests it should. The problem
is actually with the logic in the test script.
Fix the test cases as follows:
1. add debug function to dump the initial and redirect gateway addresses
for ipv6. This is shown only in verbose mode. It helps verify the
output of 'route get'.
2. fix the check_exception logic for the reset case to make sure that
for IPv4 neither mtu nor redirect appears in the 'route get' output.
For IPv6, make sure mtu is not present and the gateway is the initial
R1 lladdr.
3. fix the reset logic by using a function to delete the routes added by
initial_route_*. This format works better for the nexthop version of
the tests.
While improving the test cases, go ahead and ensure that forwarding is
disabled since IPv6 redirect requires it.
Also, runs with kernel debugging enabled sometimes show a failure with
one of the ipv4 tests, so spread the pings over longer time interval.
The end result is that 2 tests now show failures:
TEST: IPv6: mtu exception plus redirect [FAIL]
and the VRF version.
This is a bug in the IPv6 logic that will need to be fixed
separately. Redirect followed by MTU works because __ip6_rt_update_pmtu
hits the 'if (!rt6_cache_allowed_for_pmtu(rt6))' path and updates the
mtu on the exception rt6_info.
MTU followed by redirect does not have this logic. rt6_do_redirect
creates a new exception and then rt6_insert_exception removes the old
one which has the MTU exception.
Fixes: ec81053528 ("selftests: Add redirect tests")
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a test which sends 15 bytes of data, and then tries
to read 10 byes twice. Previously the second read would
sleep indifinitely, since the record was already decrypted
and there is only 5 bytes left, not full 10.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull KVM fixes from Paolo Bonzini:
"The usual smattering of fixes and tunings that came in too late for
the merge window, but should not wait four months before they appear
in a release.
I also travelled a bit more than usual in the first part of May, which
didn't help with picking up patches and reports promptly"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (33 commits)
KVM: x86: fix return value for reserved EFER
tools/kvm_stat: fix fields filter for child events
KVM: selftests: Wrap vcpu_nested_state_get/set functions with x86 guard
kvm: selftests: aarch64: compile with warnings on
kvm: selftests: aarch64: fix default vm mode
kvm: selftests: aarch64: dirty_log_test: fix unaligned memslot size
KVM: s390: fix memory slot handling for KVM_SET_USER_MEMORY_REGION
KVM: x86/pmu: do not mask the value that is written to fixed PMUs
KVM: x86/pmu: mask the result of rdpmc according to the width of the counters
x86/kvm/pmu: Set AMD's virt PMU version to 1
KVM: x86: do not spam dmesg with VMCS/VMCB dumps
kvm: Check irqchip mode before assign irqfd
kvm: svm/avic: fix off-by-one in checking host APIC ID
KVM: selftests: do not blindly clobber registers in guest asm
KVM: selftests: Remove duplicated TEST_ASSERT in hyperv_cpuid.c
KVM: LAPIC: Expose per-vCPU timer_advance_ns to userspace
KVM: LAPIC: Fix lapic_timer_advance_ns parameter overflow
kvm: vmx: Fix -Wmissing-prototypes warnings
KVM: nVMX: Fix using __this_cpu_read() in preemptible context
kvm: fix compilation on s390
...
The previous libbpf patch allows user to specify "prog_flags" to bpf
program load APIs. To enable high 32-bit randomization for a test, we need
to set BPF_F_TEST_RND_HI32 in "prog_flags".
To enable such randomization for all tests, we need to make sure all places
are passing BPF_F_TEST_RND_HI32. Changing them one by one is not
convenient, also, it would be better if a test could be switched to
"normal" running mode without code change.
Given the program load APIs used across bpf selftests are mostly:
bpf_prog_load: load from file
bpf_load_program: load from raw insns
A test_stub.c is implemented for bpf seltests, it offers two functions for
testing purpose:
bpf_prog_test_load
bpf_test_load_program
The are the same as "bpf_prog_load" and "bpf_load_program", except they
also set BPF_F_TEST_RND_HI32. Given *_xattr functions are the APIs to
customize any "prog_flags", it makes little sense to put these two
functions into libbpf.
Then, the following CFLAGS are passed to compilations for host programs:
-Dbpf_prog_load=bpf_prog_test_load
-Dbpf_load_program=bpf_test_load_program
They migrate the used load APIs to the test version, hence enable high
32-bit randomization for these tests without changing source code.
Besides all these, there are several testcases are using
"bpf_prog_load_attr" directly, their call sites are updated to pass
BPF_F_TEST_RND_HI32.
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
- bpf_fill_ld_abs_vlan_push_pop:
Prevent zext happens inside PUSH_CNT loop. This could happen because
of BPF_LD_ABS (32-bit def) + BPF_JMP (64-bit use), or BPF_LD_ABS +
EXIT (64-bit use of R0). So, change BPF_JMP to BPF_JMP32 and redefine
R0 at exit path to cut off the data-flow from inside the loop.
- bpf_fill_jump_around_ld_abs:
Jump range is limited to 16 bit. every ld_abs is replaced by 6 insns,
but on arches like arm, ppc etc, there will be one BPF_ZEXT inserted
to extend the error value of the inlined ld_abs sequence which then
contains 7 insns. so, set the dividend to 7 so the testcase could
work on all arches.
- bpf_fill_scale1/bpf_fill_scale2:
Both contains ~1M BPF_ALU32_IMM which will trigger ~1M insn patcher
call because of hi32 randomization later when BPF_F_TEST_RND_HI32 is
set for bpf selftests. Insn patcher is not efficient that 1M call to
it will hang computer. So , change to BPF_ALU64_IMM to avoid hi32
randomization.
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Pull Kselftest fixes from Shuah Khan:
- Two fixes to regressions introduced in kselftest Makefile test run
output refactoring work (Kees Cook)
- Adding Atom support to syscall_arg_fault test (Tong Bo)
* tag 'linux-kselftest-5.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/timers: Add missing fflush(stdout) calls
selftests: Remove forced unbuffering for test running
selftests/x86: Support Atom for syscall_arg_fault test
Pule more SPDX updates from Greg KH:
"Here is another set of reviewed patches that adds SPDX tags to
different kernel files, based on a set of rules that are being used to
parse the comments to try to determine that the license of the file is
"GPL-2.0-or-later".
Only the "obvious" versions of these matches are included here, a
number of "non-obvious" variants of text have been found but those
have been postponed for later review and analysis.
These patches have been out for review on the linux-spdx@vger mailing
list, and while they were created by automatic tools, they were
hand-verified by a bunch of different people, all whom names are on
the patches are reviewers"
* tag 'spdx-5.2-rc2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (85 commits)
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 125
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 123
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 122
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 121
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 120
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 119
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 118
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 116
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 114
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 113
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 112
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 111
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 110
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 106
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 105
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 104
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 103
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 102
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 101
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 98
...
Add new test_btf_dump set of tests, validating BTF-to-C conversion
correctness. Tests rely on clang to generate BTF from provided C test
cases.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Switch test_btf.c to rely on btf__parse_elf to check presence of BTF and
BTF.ext data, instead of implementing its own ELF parsing.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
bpf_printk is a macro which is commonly used to print out debug messages
in BPF programs and it was copied in many selftests and samples. Since
all of them include bpf_helpers.h, this change moves the macro there.
Signed-off-by: Michal Rostecki <mrostecki@opensuse.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The SO_TXTIME API enables packet tranmission with delayed delivery.
This is currently supported by the ETF and FQ packet schedulers.
Evaluate the interface with both schedulers. Install the scheduler
and send a variety of packets streams: without delay, with one
delayed packet, with multiple ordered delays and with reordering.
Verify that packets are released by the scheduler in expected order.
The ETF qdisc requires a timestamp in the future on every packet. It
needs a delay on the qdisc else the packet is dropped on dequeue for
having a delivery time in the past. The test value is experimentally
derived. ETF requires clock_id CLOCK_TAI. It checks this base and
drops for non-conformance.
The FQ qdisc expects clock_id CLOCK_MONOTONIC, the base used by TCP
as of commit fb420d5d91 ("tcp/fq: move back to CLOCK_MONOTONIC").
Within a flow there is an expecation of ordered delivery, as shown by
delivery times of test 4. The FQ qdisc does not require all packets to
have timestamps and does not drop for non-conformance.
The large (msec) delays are chosen to avoid flakiness.
Output:
SO_TXTIME ipv6 clock monotonic
payload:a delay:28 expected:0 (us)
SO_TXTIME ipv4 clock monotonic
payload:a delay:38 expected:0 (us)
SO_TXTIME ipv6 clock monotonic
payload:a delay:40 expected:0 (us)
SO_TXTIME ipv4 clock monotonic
payload:a delay:33 expected:0 (us)
SO_TXTIME ipv6 clock monotonic
payload:a delay:10120 expected:10000 (us)
SO_TXTIME ipv4 clock monotonic
payload:a delay:10102 expected:10000 (us)
[.. etc ..]
OK. All tests passed
Changes v1->v2: update commit message output
Signed-off-by: Willem de Bruijn <willemb@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add test for ICMP redirects and exception processing. Test is setup
for later addition of tests using nexthop objects for routing.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
uie_read is a commonly failing test that will block forever on buggy rtc
drivers. Shorten its timeout so it fails earlier. Also increase the timeout
for the two alarm test on a minute boundary.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Commit a745f7af3c ("selftests/harness: Add 30 second timeout per test")
adds an hardcoded 30s timeout to all tests. Unfortunately, rtctest has two
tests taking up to 60s. Allow for individual tests to define their own
timeout.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Add a meta-testcase which tests ftracetest itself with
checkbasisms. This helps us to keep our test script
bashisms clean.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Make kprobe_ftrace.tc checkbashisms clean. Since
"grep function available_tracers" causes an error
on checkbashisms, fix it by explicitly escaping
with double-quotations.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
struct kvm_nested_state is only available on x86 so far. To be able
to compile the code on other architectures as well, we need to wrap
the related code with #ifdefs.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
VM_MODE_P52V48_4K is not a valid mode for AArch64. Replace its
use in vm_create_default() with a mode that works and represents
a good AArch64 default. (We didn't ever see a problem with this
because we don't have any unit tests using vm_create_default(),
but it's good to get it fixed in advance.)
Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The memory slot size must be aligned to the host's page size. When
testing a guest with a 4k page size on a host with a 64k page size,
then 3 guest pages are not host page size aligned. Since we just need
a nearly arbitrary number of extra pages to ensure the memslot is not
aligned to a 64 host-page boundary for this test, then we can use
16, as that's 64k aligned, but not 64 * 64k aligned.
Fixes: 76d58e0f07 ("KVM: fix KVM_CLEAR_DIRTY_LOG for memory slots of unaligned size", 2019-04-17)
Signed-off-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The guest_code of sync_regs_test is assuming that the compiler will not
touch %r11 outside the asm that increments it, which is a bit brittle.
Instead, we can increment a variable and use a dummy asm to ensure the
increment is not optimized away. However, we also need to use a
callee-save register or the compiler will insert a save/restore around
the vmexit, breaking the whole idea behind the test.
(Yes, "if it ain't broken...", but I would like the test to be clean
before it is copied into the upcoming s390 selftests).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The check for entry->index == 0 is done twice. One time should
be sufficient.
Suggested-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
So far the KVM selftests are compiled without any compiler warnings
enabled. That's quite bad, since we miss a lot of possible bugs this
way. Let's enable at least "-Wall" and some other useful warning flags
now, and fix at least the trivial problems in the code (like unused
variables).
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The code is trying to check that all the padding is zeroed out and it
does this:
entry->padding[0] == entry->padding[1] == entry->padding[2] == 0
Assume everything is zeroed correctly, then the first comparison is
true, the next comparison is false and false is equal to zero so the
overall condition is true. This bug doesn't affect run time very
badly, but the code should instead just check that all three paddings
are zero individually.
Also the error message was copy and pasted from an earlier error and it
wasn't correct.
Fixes: 7edcb73433 ("KVM: selftests: Add hyperv_cpuid test")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version this program is distributed in the
hope that it will be useful but without any warranty without even
the implied warranty of merchantability or fitness for a particular
purpose see the gnu general public license for more details you
should have received a copy of the gnu general public license along
with this program if not write to the free software foundation inc
675 mass ave cambridge ma 02139 usa
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 441 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190520071858.739733335@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pablo Neira Ayuso says:
====================
Netfilter/IPVS fixes for net
The following patchset contains Netfilter/IPVS fixes for your net tree:
1) Fix crash when dumping rules after conversion to RCU,
from Florian Westphal.
2) Fix incorrect hook reinjection from nf_queue in case NF_REPEAT,
from Jagdish Motwani.
3) Fix check for route existence in fib extension, from Phil Sutter.
4) Fix use after free in ip_vs_in() hook, from YueHaibing.
5) Check for veth existence from netfilter selftests,
from Jeffrin Jose T.
6) Checksum corruption in UDP NAT helpers due to typo,
from Florian Westphal.
7) Pass up packets to classic forwarding path regardless of
IPv4 DF bit, patch for the flowtable infrastructure from Florian.
8) Set liberal TCP tracking for flows that are placed in the
flowtable, in case they need to go back to classic forwarding path,
also from Florian.
9) Don't add flow with sequence adjustment to flowtable, from Florian.
10) Skip IPv4 options from IPv6 datapath in flowtable, from Florian.
11) Add selftest for the flowtable infrastructure, from Florian.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a snippet of pyperf bpf program used to collect python stack traces
as a scale test for the verifier.
At 189 loop iterations llvm 9.0 starts ignoring '#pragma unroll'
and generates partially unrolled loop instead.
Hence use 50, 100, and 180 loop iterations to stress test.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Adjust scale tests to check for new jmp sequence limit.
BPF_JGT had to be changed to BPF_JEQ because the verifier was
too smart. It tracked the known safe range of R0 values
and pruned the search earlier before hitting exact 8192 limit.
bpf_semi_rand_get() was too (un)?lucky.
k = 0; was missing in bpf_fill_scale2.
It was testing a bit shorter sequence of jumps than intended.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Add three tests to test_verifier/basic_instr that make sure that the
high 32-bits of the destination register is cleared after an ALU32
and/or/xor.
Signed-off-by: Björn Töpel <bjorn.topel@gmail.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
The point of the pause-on-fail argument is to leave the setup as is after
a test fails to allow a user to debug why it failed. Move the cleanup
after posting the result to the user to make it so.
Random names for the namespaces are not user friendly when trying to
debug a failure. Make them simpler and more direct for the tests. Run
cleanup at the beginning to ensure they are cleaned up if they already
exist.
Remove cleanup_done. There is no harm in doing cleanup twice; just
ignore any errors related to not existing - which is already done.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add VERBOSE argument to fib-onlink-tests.sh and make output quiet by
default. Add getopt parsing of inputs and support for -v (verbose) and
-p (pause on fail).
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull networking fixes from David Miller:
1) Clear up some recent tipc regressions because of registration
ordering. Fix from Junwei Hu.
2) tipc's TLV_SET() can read past the end of the supplied buffer during
the copy. From Chris Packham.
3) ptp example program doesn't match the kernel, from Richard Cochran.
4) Outgoing message type fix in qrtr, from Bjorn Andersson.
5) Flow control regression in stmmac, from Tan Tee Min.
6) Fix inband autonegotiation in phylink, from Russell King.
7) Fix sk_bound_dev_if handling in rawv6_bind(), from Mike Manning.
8) Fix usbnet crash after disconnect, from Kloetzke Jan.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (21 commits)
usbnet: fix kernel crash after disconnect
selftests: fib_rule_tests: use pre-defined DEV_ADDR
net-next: net: Fix typos in ip-sysctl.txt
ipv6: Consider sk_bound_dev_if when binding a raw socket to an address
net: phylink: ensure inband AN works correctly
usbnet: ipheth: fix racing condition
net: stmmac: dma channel control register need to be init first
net: stmmac: fix ethtool flow control not able to get/set
net: qrtr: Fix message type of outgoing packets
networking: : fix typos in code comments
ptp: Fix example program to match kernel.
fddi: fix typos in code comments
selftests: fib_rule_tests: enable forwarding before ipv4 from/iif test
selftests: fib_rule_tests: fix local IPv4 address typo
tipc: Avoid copying bytes beyond the supplied data
2/2] net: xilinx_emaclite: use readx_poll_timeout() in mdio wait function
1/2] net: axienet: use readx_poll_timeout() in mdio wait function
vlan: Mark expected switch fall-through
macvlan: Mark expected switch fall-through
net/mlx4_en: ethtool, Remove unsupported SFP EEPROM high pages query
...
Exercises 3 cases:
1. no pmtu discovery (need to frag)
2. no PMTUd + NAT (don't flag packets as invalid from conntrack)
3. PMTU + NAT (need to send icmp error)
The first two cases make sure we handle fragments correctly, i.e.
pass them to classic forwarding path.
Third case checks we offload everything (in the test case,
PMTUd will kick in so all packets should be within link mtu).
Nftables rules will filter packets that are supposed to be
handled by the fast-path.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
DEV_ADDR is defined but not used. Use it in address setting.
Do the same with IPv6 for consistency.
Reported-by: David Ahern <dsahern@gmail.com>
Fixes: fc82d93e57 ("selftests: fib_rule_tests: fix local IPv4 address typo")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull SPDX update from Greg KH:
"Here is a series of patches that add SPDX tags to different kernel
files, based on two different things:
- SPDX entries are added to a bunch of files that we missed a year
ago that do not have any license information at all.
These were either missed because the tool saw the MODULE_LICENSE()
tag, or some EXPORT_SYMBOL tags, and got confused and thought the
file had a real license, or the files have been added since the
last big sweep, or they were Makefile/Kconfig files, which we
didn't touch last time.
- Add GPL-2.0-only or GPL-2.0-or-later tags to files where our scan
tools can determine the license text in the file itself. Where this
happens, the license text is removed, in order to cut down on the
700+ different ways we have in the kernel today, in a quest to get
rid of all of these.
These patches have been out for review on the linux-spdx@vger mailing
list, and while they were created by automatic tools, they were
hand-verified by a bunch of different people, all whom names are on
the patches are reviewers.
The reason for these "large" patches is if we were to continue to
progress at the current rate of change in the kernel, adding license
tags to individual files in different subsystems, we would be finished
in about 10 years at the earliest.
There will be more series of these types of patches coming over the
next few weeks as the tools and reviewers crunch through the more
"odd" variants of how to say "GPLv2" that developers have come up with
over the years, combined with other fun oddities (GPL + a BSD
disclaimer?) that are being unearthed, with the goal for the whole
kernel to be cleaned up.
These diffstats are not small, 3840 files are touched, over 10k lines
removed in just 24 patches"
* tag 'spdx-5.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (24 commits)
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 25
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 24
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 23
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 22
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 21
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 20
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 19
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 18
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 17
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 15
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 14
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 13
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 12
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 11
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 10
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 9
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 7
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 5
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 4
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 3
...
A test for the basic NAT functionality uses ip command which needs veth
device. There is a condition where the kernel support for veth is not
compiled into the kernel and the test script breaks. This patch contains
code for reasonable error display and correct code exit.
Signed-off-by: Jeffrin Jose T <jeffrin@rajagiritech.edu.in>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
When running under a pipe, some timer tests would not report output in
real-time because stdout flushes were missing after printf()s that lacked
a newline. This adds them to restore real-time status output that humans
can enjoy.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
As it turns out, the "stdbuf" command will actually force all
subprocesses into unbuffered output, and some implementations of "echo"
turn into single-character writes, which utterly wrecks writes to /sys
and /proc files.
Instead, drop the "stdbuf" usage, and for any tests that want explicit
flushing between newlines, they'll have to add "fflush(stdout);" as
needed.
Reported-by: Takashi Iwai <tiwai@suse.de>
Fixes: 5c069b6ded ("selftests: Move test output to diagnostic lines")
Signed-off-by: Kees Cook <keescook@chromium.org>
Tested-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Atom-based CPUs trigger stack fault when invoke 32-bit SYSENTER instruction
with invalid register values. So we also need SIGBUS handling in this case.
Following is assembly when the fault exception happens.
(gdb) disassemble $eip
Dump of assembler code for function __kernel_vsyscall:
0xf7fd8fe0 <+0>: push %ecx
0xf7fd8fe1 <+1>: push %edx
0xf7fd8fe2 <+2>: push %ebp
0xf7fd8fe3 <+3>: mov %esp,%ebp
0xf7fd8fe5 <+5>: sysenter
0xf7fd8fe7 <+7>: int $0x80
=> 0xf7fd8fe9 <+9>: pop %ebp
0xf7fd8fea <+10>: pop %edx
0xf7fd8feb <+11>: pop %ecx
0xf7fd8fec <+12>: ret
End of assembler dump.
According to Intel SDM, this could also be a Stack Segment Fault(#SS, 12),
except a normal Page Fault(#PF, 14). Especially, in section 6.9 of Vol.3A,
both stack and page faults are within the 10th(lowest priority) class, and
as it said, "exceptions within each class are implementation-dependent and
may vary from processor to processor". It's expected for processors like
Intel Atom to trigger stack fault(SIGBUS), while we get page fault(SIGSEGV)
from common Core processors.
Signed-off-by: Tong Bo <bo.tong@intel.com>
Acked-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
