The K210's bootloader does not provide a device tree. Give the ability
to providea builtin one with the SOC_KENDRYTE_K210_BUILTIN_DTB option.
If selected, this option result in the definition of a builtin DTB
entry in the k210 sysctl driver.
If defined, the builtin DTB entry points to the default k210.dts device
tree file and is keyed with the vendor ID 0x4B5, the arch ID
0xE59889E6A5A04149 ("Canaan AI" in UTF-8 coded Chinese) and the impl ID
0x4D41495832303030 ("MAIX200"). These values are reported by the SiPEED
MAIXDUINO board, the SiPEED MAIX Go board and the SiPEED Dan Dock board.
[Thanks to Damien for the K210 IDs]
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Attempting to compile rpmh-rsc.c as a module with TRACING enabled causes
a build error as no _rcuidle function is generated for tracepoints when
CONFIG_MODULE is set.
Attempts has been made, but no resolution has been agreed upon, so lets
revert this commit for now.
This reverts commit 1d3c6f86fd.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
It has been postulated that the pm_lock is bad for performance because
a CPU currently running rpmh_flush() could block other CPUs from
coming out of idle. Similarly CPUs coming out of / going into idle
all need to contend with each other for the spinlock just to update
the variable tracking who's in PM.
Let's optimize this a bit. Specifically:
- Use a count rather than a bitmask. This is faster to access and
also means we can use the atomic_inc_return() function to really
detect who the last one to enter PM was.
- Accept that it's OK if we race and are doing the flush (because we
think we're last) while another CPU is coming out of idle. As long
as we block that CPU if/when it tries to do an active-only transfer
we're OK.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20200504104917.v6.5.I295cb72bc5334a2af80313cbe97cb5c9dcb1442c@changeid
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
The rpmh-rsc code had both a driver-level lock (sometimes referred to
in comments as drv->lock) and a lock per-TCS. The idea was supposed
to be that there would be times where you could get by with just
locking a TCS lock and therefor other RPMH users wouldn't be blocked.
The above didn't work out so well.
Looking at tcs_write() the bigger drv->lock was held for most of the
function anyway. Only the __tcs_buffer_write() and
__tcs_set_trigger() calls were called without holding the drv->lock.
It actually turns out that in tcs_write() we don't need to hold the
drv->lock for those function calls anyway even if the per-TCS lock
isn't there anymore. From the newly added comments in the code, this
is because:
- We marked "tcs_in_use" under lock.
- Once "tcs_in_use" has been marked nobody else could be writing
to these registers until the interrupt goes off.
- The interrupt can't go off until we trigger w/ the last line
of __tcs_set_trigger().
Thus, from a tcs_write() point of view, the per-TCS lock was useless.
Looking at rpmh_rsc_write_ctrl_data(), only the per-TCS lock was held.
It turns out, though, that this function already needs to be called
with the equivalent of the drv->lock held anyway (we either need to
hold drv->lock as we will in a future patch or we need to know no
other CPUs could be running as happens today). Specifically
rpmh_rsc_write_ctrl_data() might be writing to a TCS that has been
borrowed for writing an active transation but it never checks this.
Let's eliminate this extra overhead and avoid possible AB BA locking
headaches.
Suggested-by: Maulik Shah <mkshah@codeaurora.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20200504104917.v6.4.Ib8dccfdb10bf6b1fb1d600ca1c21d9c0db1ef746@changeid
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
When a PM Notifier returns NOTIFY_BAD it doesn't get called with
CPU_PM_ENTER_FAILED. It only get called for CPU_PM_ENTER_FAILED if
someone else (further down the notifier chain) returns NOTIFY_BAD.
Handle this case by taking our CPU out of the list of ones that have
entered PM. Without this it's possible we could detect that the last
CPU went down (and we would flush) even if some CPU was alive. That's
not good since our flushing routines currently assume they're running
on the last CPU for mutual exclusion.
Fixes: 985427f997 ("soc: qcom: rpmh: Invoke rpmh_flush() for dirty caches")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Maulik Shah <mkshah@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20200504104917.v6.2.I1927d1bca2569a27b2d04986baf285027f0818a2@changeid
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Our switch statement doesn't have entries for CPU_CLUSTER_PM_ENTER,
CPU_CLUSTER_PM_ENTER_FAILED, and CPU_CLUSTER_PM_EXIT and doesn't have
a default. This means that we'll try to do a flush in those cases but
we won't necessarily be the last CPU down. That's not so ideal since
our (lack of) locking assumes we're on the last CPU.
Luckily this isn't as big a problem as you'd think since (at least on
the SoC I tested) we don't get these notifications except on full
system suspend. ...and on full system suspend we get them on the last
CPU down. That means that the worst problem we hit is flushing twice.
Still, it's good to make it correct.
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Fixes: 985427f997 ("soc: qcom: rpmh: Invoke rpmh_flush() for dirty caches")
Reported-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20200504104917.v6.1.Ic7096b3b9b7828cdd41cd5469a6dee5eb6abf549@changeid
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Mask the consumer index before using it. Without this, we would be
writing frame descriptors beyond the ring size supported by the QBMAN
block.
Fixes: 3b2abda7d2 ("soc: fsl: dpio: Replace QMAN array mode with ring mode enqueue")
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Acked-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The PMIC wake event can be used to bring the system out of suspend based
on certain events happening on the PMIC (such as an RTC alarm).
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
I have hit the following build error:
armv7a-hardfloat-linux-gnueabi-ld: drivers/soc/tegra/pmc.o: in function `pinconf_generic_dt_node_to_map_pin':
pmc.c:(.text+0x500): undefined reference to `pinconf_generic_dt_node_to_map'
armv7a-hardfloat-linux-gnueabi-ld: drivers/soc/tegra/pmc.o:(.rodata+0x1f88): undefined reference to `pinconf_generic_dt_free_map'
So SOC_TEGRA_PMC should select GENERIC_PINCONF.
Fixes: 4a37f11c8f ("soc/tegra: pmc: Implement pad configuration via pinctrl")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Currently the SoC revision attribute for Tegra devices displays the
value of the enum associated with a particular revision. This is not
very useful because to obtain the actual revision you need to
use the tegra_revision enumeration to translate the value.
It is more meaningful to display a name for the revision, such as
'A01', than the enumarated value and therefore, update the revision
attribute to display a name. This change does alter the ABI, which
is unfortunate, but this is more meaningful and maintable.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Clean-up the tegra_init_revision() function by removing the 'rev'
variable which is not needed and use the newly added helper function
tegra_get_minor_rev() to get the minor revision.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add a custom SoC attribute for Tegra to expose the HIDREV register
fields to userspace via the sysfs. This register provides additional
details about the type of device (eg, silicon, FPGA, etc) as well as
revision. Exposing this information is useful for identifying the
exact device revision and device type.
For Tegra devices up until Tegra186, the majorrev and minorrev fields of
the HIDREV register are used to determine the device revision and device
type. For Tegra194, the majorrev and minorrev fields only determine the
revision. Starting with Tegra194, there is an additional field,
pre_si_platform (which occupies bits 20-23), that now determines device
type. Therefore, for all Tegra devices, add a custom SoC attribute for
the majorrev and minorrev fields and for Tegra194 add an additional
attribute for the pre_si_platform field.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The PMIC wake event can be used to bring the system out of suspend based
on certain events happening on the PMIC (such as an RTC alarm).
Signed-off-by: Thierry Reding <treding@nvidia.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
We pass the result of sizeof() here to tell the printk format specifier
how many bytes to print. That expects an int though and sizeof() isn't
that type. Cast to int to silence this warning:
drivers/soc/qcom/cmd-db.c: In function 'cmd_db_debugfs_dump':
drivers/soc/qcom/cmd-db.c:281:30: warning: field width specifier '*' expects argument of type 'int', but argument 4 has type 'long unsigned int' [-Wformat=]
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Fixes: d6815c5c43 ("soc: qcom: cmd-db: Add debugfs dumping file")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20200415062033.66406-1-swboyd@chromium.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Compile-testing the driver can result in a link failure
when CONFIG_SOC_BUS is disabled:
x86_64-linux-ld: drivers/soc/imx/soc-imx8m.o: in function `imx8_soc_init':
soc-imx8m.c:(.init.text+0x28d): undefined reference to `soc_device_register'
Select it from Kconfig, as we do from the other SoC drivers.
Link: https://lore.kernel.org/r/20200409075208.2824062-1-arnd@arndb.de
Fixes: fc40200ebf ("soc: imx: increase build coverage for imx8m soc driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
A 1024 byte variable on the stack will warn on any 32-bit architecture
during compile-testing, and is generally a bad idea anyway:
fsl/dpio/dpio-service.c: In function 'dpaa2_io_service_enqueue_multiple_desc_fq':
fsl/dpio/dpio-service.c:495:1: error: the frame size of 1032 bytes is larger than 1024 bytes [-Werror=frame-larger-than=]
There are currently no callers of this function, so I cannot tell whether
dynamic memory allocation is allowed once callers are added. Change
it to kcalloc for now, if anyone gets a warning about calling this in
atomic context after they start using it, they can fix it later.
Link: https://lore.kernel.org/r/20200408185834.434784-1-arnd@arndb.de
Fixes: 9d98809711 ("soc: fsl: dpio: Adding QMAN multiple enqueue interface")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Building dpio for 32 bit shows a new compiler warning from converting
a pointer to a u64:
drivers/soc/fsl/dpio/qbman-portal.c: In function 'qbman_swp_enqueue_multiple_desc_direct':
drivers/soc/fsl/dpio/qbman-portal.c:870:14: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
870 | addr_cena = (uint64_t)s->addr_cena;
The variable is not used anywhere, so removing the assignment seems
to be the correct workaround. After spotting what seemed to be
some confusion about address spaces, I ran the file through sparse,
which showed more warnings:
drivers/soc/fsl/dpio/qbman-portal.c:756:42: warning: incorrect type in argument 1 (different address spaces)
drivers/soc/fsl/dpio/qbman-portal.c:756:42: expected void const volatile [noderef] <asn:2> *addr
drivers/soc/fsl/dpio/qbman-portal.c:756:42: got unsigned int [usertype] *[assigned] p
drivers/soc/fsl/dpio/qbman-portal.c:902:42: warning: incorrect type in argument 1 (different address spaces)
drivers/soc/fsl/dpio/qbman-portal.c:902:42: expected void const volatile [noderef] <asn:2> *addr
drivers/soc/fsl/dpio/qbman-portal.c:902:42: got unsigned int [usertype] *[assigned] p
Here, the problem is passing a token from memremap() into __raw_readl(),
which is only defined to work on MMIO addresses but not RAM. Turning
this into a simple pointer dereference avoids this warning as well.
Link: https://lore.kernel.org/r/20200408185904.460563-1-arnd@arndb.de
Fixes: 3b2abda7d2 ("soc: fsl: dpio: Replace QMAN array mode with ring mode enqueue")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The firmware driver is optional, but the power driver depends on it,
which needs to be reflected in Kconfig to avoid link errors:
aarch64-linux-ld: drivers/soc/xilinx/zynqmp_power.o: in function `zynqmp_pm_isr':
zynqmp_power.c:(.text+0x284): undefined reference to `zynqmp_pm_invoke_fn'
The firmware driver can probably be allowed for compile-testing as
well, so it's best to drop the dependency on the ZYNQ platform
here and allow building as long as the firmware code is built-in.
Fixes: ab272643d7 ("drivers: soc: xilinx: Add ZynqMP PM driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20200408155224.2070880-1-arnd@arndb.de
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
No need to put node when of_find_compatible_node() failed, return
immediately to simplify the code.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Auditing tcs_invalidate() made me worried. Specifically I saw that it
used spin_lock(), not spin_lock_irqsave(). That always worries me
unless I can trace for sure that I'm in the interrupt handler or that
someone else already disabled interrupts.
Looking more at it, there is actually no reason for these locks
anyway. Specifically the only reason you'd ever call
rpmh_rsc_invalidate() is if you cared that the sleep/wake TCSes were
empty. That means that they need to continue to be empty even after
rpmh_rsc_invalidate() returns. The only way that can happen is if the
caller already has done something to keep all other RPMH users out.
It should be noted that even though the caller is only worried about
making sleep/wake TCSes empty, they also need to worry about stopping
active-only transfers if they need to handle the case where
active-only transfers might borrow the wake TCS.
At the moment rpmh_rsc_invalidate() is only called in PM code from the
last CPU. If that later changes the caller will still need to solve
the above problems themselves, so these locks will never be useful.
Continuing to audit tcs_invalidate(), I found a bug. The function
didn't properly check for a borrowed TCS if we hadn't recently written
anything into the TCS. Specifically, if we've never written to the
WAKE_TCS (or we've flushed it recently) then tcs->slots is empty.
We'll early-out and we'll never call tcs_is_free().
I thought about fixing this bug by either deleting the early check for
bitmap_empty() or possibly only doing it if we knew we weren't on a
TCS that could be borrowed. However, I think it's better to just
delete the checks.
As argued above it's up to the caller to make sure that all other
users of RPMH are quiet before tcs_invalidate() is called. Since
callers need to handle the zero-active-TCS case anyway that means they
need to make sure that the active-only transfers are quiet before
calling too. The one way tcs_invalidate() gets called today is
through rpmh_rsc_cpu_pm_callback() which calls
rpmh_rsc_ctrlr_is_busy() to handle this. When we have another path to
get to tcs_invalidate() it will also need to come up with something
similar and it won't need this extra check either. If we later find
some code path that actually needs this check back in (and somehow
manages to be race free) we can always add it back in.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Maulik Shah <mkshah@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Tested-by: Maulik Shah <mkshah@codeaurora.org>
Link: https://lore.kernel.org/r/20200413100321.v4.9.I07c1f70e0e8f2dc0004bd38970b4e258acdc773e@changeid
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
