Pull ARM device tree updates from Arnd Bergmann:
"Across all platforms, there is a continued move towards DT schema for
validating the dts files. As a result there are bug fixes for mistakes
that are found using these schema, in addition to warnings from the
dtc compiler.
As usual, many changes are for adding support for additional on-chip
and on-board components in the machines we already support.
The newly supported SoCs for this release are:
- MStar Infinity2M, a low-end IP camera chip based on a dual-core
Cortex-A7, otherwise similar to the Infinity chip we already
support. This is also known as the SigmaStar SSD202D, and we add
support for the Honestar ssd201htv2 development kit.
- Nuvoton NPCM730, a Cortex-A9 based Baseboard Management Controller
(BMC), in the same family as the NPCM750. This gets used in the
Ampere Altra based "Fii Kudo" server and the Quanta GSJ, both of
which are added as well.
- Broadcom BCM4908, a 64-bit home router chip based on Broadcom's own
Brahma-B53 CPU. Support is also added for the Asus ROG Rapture
GT-AC5300 high-end WiFi router based on this chip.
- Mediatek MT8192 is a new SoC based on eight Cortex-A76/A55 cores,
meant for faster Chromebooks and tablets. It gets added along with
its reference design.
- Mediatek MT6779 (Helio P90) is a high-end phone chip from last
year's generation, also added along with its reference board. This
one is still based on Cortex-A75/A55.
- Mediatek MT8167 is a version of the already supported MT8516 chip,
both based on Cortex-A35. It gets added along with the "Pumpkin"
single board computer, but is likely to also make its way into
low-end tablets in the future.
For the already supported chips, there are a number of new boards.
Interestingly there are more 32-bit machines added this time than
64-bit. Here is a brief list of the new boards:
- Three new Mikrotik router variants based on Marvell Prestera
98DX3236, a close relative of the more common Armada XP
- A reference board for the Marvell Armada 382
- Three new servers using ASpeed baseboard management controllers,
the actual machines being from Bytedance, Facebook and IBM, and one
machine using the Nuvoton NPCM750 BMC.
- The Galaxy Note 10.1 (P4) tablet, using an Exynos 4412.
- The usual set of 32-bit i.MX industrial/embedded hardware:
* Protonic WD3 (tractor e-cockpit)
* Kamstrup OMNIA Flex Concentrator (smart grid platform)
* Van der Laan LANMCU (food storage)
* Altesco I6P (vehicle inspection stations)
* PHYTEC phyBOARD-Segin/phyCORE-i.MX6UL baseboard
- DH electronics STM32MP157C DHCOM, a PicoITX carrier board for the
aleady supported DHCOM module
- Three new Allwinner SoC based single-board computers:
* NanoPi R1 (H3 based)
* FriendlyArm ZeroPi (H3 based)
* Elimo Initium SBC (S3 based)
- Ouya Game Console based on Nvidia Tegra 3
- Version 5 of the already supported Zynq Z-Turn MYIR Board
- LX2162AQDS, a reference platform for NXP Layerscape LX2162A, which
is a repackaged 16-core LX2160A
- A series of Kontron i.MX8M Mini baseboard/SoM versions
- Espressobin Ultra, a new variant of the popular Armada 3700 based
board,
- IEI Puzzle-M801, a rackmount network appliance based on Marvell
Armada 8040
- Microsoft Lumia 950 XL, a phone
- HDK855 and HDK865 Hardware development kits for Qualcomm sm8250 and
sm8150, respectively
- Three new board variants of the "Trogdor" Chromebook (sc7180)
- New board variants of the Renesas based "Kingfisher" and "HiHope"
reference boards
- Kobol Helios64, an open source NAS appliance based on Rockchips
RK3399
- Engicam PX30.Core, a SoM based on Rockchip PX30, along with a few
carrier boards"
* tag 'arm-soc-dt-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (679 commits)
arm64: dts: sparx5: Add SGPIO devices
arm64: dts: sparx5: Add reset support
dt-bindings: gpio: Add a binding header for the MSC313 GPIO driver
ARM: mstar: SMP support
ARM: mstar: Wire up smpctrl for SSD201/SSD202D
ARM: mstar: Add smp ctrl registers to infinity2m dtsi
ARM: mstar: Add dts for Honestar ssd201htv2
ARM: mstar: Add chip level dtsi for SSD202D
ARM: mstar: Add common dtsi for SSD201/SSD202D
ARM: mstar: Add infinity2m support
dt-bindings: mstar: Add Honestar SSD201_HT_V2 to mstar boards
dt-bindings: vendor-prefixes: Add honestar vendor prefix
dt-bindings: mstar: Add binding details for mstar,smpctrl
ARM: mstar: Fill in GPIO controller properties for infinity
ARM: mstar: Add gpio controller to MStar base dtsi
ARM: zynq: Fix incorrect reference to XM013 instead of XM011
ARM: zynq: Convert at25 binding to new description on zc770-xm013
ARM: zynq: Fix OCM mapping to be aligned with binding on zc702
ARM: zynq: Fix leds subnode name for zc702/zybo-z7
ARM: zynq: Rename bus to be align with simple-bus yaml
...
Pull ARM SoC defconfig updates from Arnd Bergmann:
"These are the usual defconfig updates, adding support for additional
modules and updating some files according to changes in Kconfig.
I also include the removal of CONFIG_BACKLIGHT_GENERIC across multiple
architectures, after the driver was removed"
* tag 'arm-soc-defconfig-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (41 commits)
powerpc/configs: drop unused BACKLIGHT_GENERIC option
parisc: configs: drop unused BACKLIGHT_GENERIC option
arm64: defconfig: drop unused BACKLIGHT_GENERIC option
ARM: configs: drop unused BACKLIGHT_GENERIC option
arm64: defconfig: Enable more Librem 5 hardware
arm64: defconfig: Enable RTC_DRV_HYM8563
arm64: defconfig: Enable USB_SERIAL_CP210X
arm64: defconfig: Enable PHY_ROCKCHIP_INNO_DSIDPHY
arm64: defconfig: Enable ROCKCHIP_LVDS
arm64: defconfig: Enable ARM SCMI protocol and drivers
ARM: multi_v7_defconfig: Enable ARM SCMI protocol and drivers
ARM: multi_v7_defconfig: enable STM32 dfsdm audio support
ARM: multi_v7_defconfig: enable STM32 spdifrx support
ARM: multi_v7_defconfig: enable STUSB160X Type-C port controller support
ARM: multi_v7_defconfig: add STM32 crypto support
ARM: multi_v7_defconfig: enable counter subsystem and stm32 counter drivers
ARM: multi_v7_defconfig: make Samsung Exynos EHCI driver a module
arm64: defconfig: Enable Qualcomm PON driver
ARM: omap2plus_defconfig: Enable TI eQEP counter driver
ARM: multi_v7_defconfig: ti: Enable networking options for nfs boot
...
Pull pin control updates from Linus Walleij:
"This is the bulk of pin control changes for the v5.11 kernel.
Drivers, drivers and drivers. Not a single core change.
Some new stuff, especially a bunch of new Intel, Qualcomm and Ocelot
SoCs.
As part of the modularization attempt, I applied one patch affecting
the firmware subsystem as a functional (not syntactic/semantic)
dependency and then it blew up in our face, so I had to revert it,
bummer. It will come in later, through that subsystem, I guess.
New drivers:
- New driver for the Microchip Serial GPIO "SGPIO".
- Qualcomm SM8250 LPASS (Low Power Audio Subsystem) GPIO driver.
New subdrivers:
- Intel Lakefield subdriver.
- Intel Elkhart Lake subdriver.
- Intel Alder Lake-S subdriver.
- Qualcomm MSM8953 subdriver.
- Qualcomm SDX55 subdriver.
- Qualcomm SDX55 PMIC subdriver.
- Ocelot Luton SoC subdriver.
- Ocelot Serval SoC subdriver.
Modularization:
- The Meson driver can now be built as modules.
- The Qualcomm driver(s) can now be built as modules.
Incremental improvements:
- The Intel driver now supports pin configuration for GPIO-related
configurations.
- A bunch of Renesas PFC drivers have been augmented with support for
QSPI pins, groups and functions.
- Non-critical fixes to the irq handling in the Allwinner Sunxi
driver"
* tag 'pinctrl-v5.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (80 commits)
pinctrl/spear: simplify the return expression of spear300_pinctrl_probe()
pinctrl: mediatek: simplify the return expression of mtk_pinconf_bias_disable_set_rev1()
dt-bindings: pinctrl: pinctrl-microchip-sgpio: Add irq support
pinctrl: pinctrl-microchip-sgpio: Add irq support (for sparx5)
pinctrl: qcom: Add sm8250 lpass lpi pinctrl driver
dt-bindings: pinctrl: qcom: Add sm8250 lpass lpi pinctrl bindings
pinctrl: qcom-pmic-gpio: Add support for pmx55
dt-bindings: pinctrl: qcom-pmic-gpio: Add pmx55 support
pinctrl: pinctrl-microchip-sgpio: Mark some symbols with static keyword
pinctrl: at91-pio4: Make PINCTRL_AT91PIO4 depend on HAS_IOMEM to fix build error
pinctrl: mtk: Fix low level output voltage issue
pinctrl: falcon: add missing put_device() call in pinctrl_falcon_probe()
pinctrl: actions: pinctrl-s500: Constify s500_padinfo[]
pinctrl: pinctrl-microchip-sgpio: Add OF config dependency
pinctrl: pinctrl-microchip-sgpio: Add pinctrl driver for Microsemi Serial GPIO
dt-bindings: pinctrl: Add bindings for pinctrl-microchip-sgpio driver
pinctrl: at91-pio4: add support for fewer lines on last PIO bank
pinctrl: sunxi: Always call chained_irq_{enter, exit} in sunxi_pinctrl_irq_handler
pinctrl: sunxi: Mark the irq bank not found in sunxi_pinctrl_irq_handler() with WARN_ON
pinctrl: sunxi: fix irq bank map for the Allwinner A100 pin controller
...
Pull crypto updates from Herbert Xu:
"API:
- Add speed testing on 1420-byte blocks for networking
Algorithms:
- Improve performance of chacha on ARM for network packets
- Improve performance of aegis128 on ARM for network packets
Drivers:
- Add support for Keem Bay OCS AES/SM4
- Add support for QAT 4xxx devices
- Enable crypto-engine retry mechanism in caam
- Enable support for crypto engine on sdm845 in qce
- Add HiSilicon PRNG driver support"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (161 commits)
crypto: qat - add capability detection logic in qat_4xxx
crypto: qat - add AES-XTS support for QAT GEN4 devices
crypto: qat - add AES-CTR support for QAT GEN4 devices
crypto: atmel-i2c - select CONFIG_BITREVERSE
crypto: hisilicon/trng - replace atomic_add_return()
crypto: keembay - Add support for Keem Bay OCS AES/SM4
dt-bindings: Add Keem Bay OCS AES bindings
crypto: aegis128 - avoid spurious references crypto_aegis128_update_simd
crypto: seed - remove trailing semicolon in macro definition
crypto: x86/poly1305 - Use TEST %reg,%reg instead of CMP $0,%reg
crypto: x86/sha512 - Use TEST %reg,%reg instead of CMP $0,%reg
crypto: aesni - Use TEST %reg,%reg instead of CMP $0,%reg
crypto: cpt - Fix sparse warnings in cptpf
hwrng: ks-sa - Add dependency on IOMEM and OF
crypto: lib/blake2s - Move selftest prototype into header file
crypto: arm/aes-ce - work around Cortex-A57/A72 silion errata
crypto: ecdh - avoid unaligned accesses in ecdh_set_secret()
crypto: ccree - rework cache parameters handling
crypto: cavium - Use dma_set_mask_and_coherent to simplify code
crypto: marvell/octeontx - Use dma_set_mask_and_coherent to simplify code
...
This pull request contains Broadcom ARM64-based SoCs Device Tree changes
for 5.11, please pull the following:
- Rafal adds initial support for the Broadcom 4908 which are SoCs used
in home routers and are based on the DSL architecture and using
Broadcom Brahma-B53 CPUs.
* tag 'arm-soc/for-5.11/devicetree-arm64' of https://github.com/Broadcom/stblinux:
arm64: add config for Broadcom BCM4908 SoCs
arm64: dts: broadcom: add BCM4908 and Asus GT-AC5300 early DTS files
dt-bindings: arm: bcm: document BCM4908 bindings
Link: https://lore.kernel.org/r/20201128163410.1691529-4-f.fainelli@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
i.MX defconfig update for 5.11:
- A couple of patches that enable various i.MX audio drivers for i.MX8M.
- Enable more drivers that are useful on Librem 5 hardware.
* tag 'imx-defconfig-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: defconfig: Enable more Librem 5 hardware
arm64: defconfig: Enable ASRC and EASRC
arm64: defconfig: Enable additional sound drivers on i.MX8M Mini
Link: https://lore.kernel.org/r/20201202142717.9262-6-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Qualcomm defconfig updates for 5.11
This enables the Qualcomm PON and OSM L3 drivers. It then ensures that
the QCOM_SCM and Command DB drivers are built-in, now that they have
been made user selectable and tristate.
* tag 'qcom-arm64-defconfig-for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
arm64: defconfig: Enable Qualcomm PON driver
arm64: defconfig: Enable QCOM_SCM as builtin
arm64: defconfig: Enable Qualcomm OSM L3 driver
arm64: defconfig: Enable Qualcomm Command DB driver
Link: https://lore.kernel.org/r/20201130190124.345127-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
ARM64 defconfig changes for TI K3 platforms for v5.11 merge window:
- GPIO and I2C for J721E SD card support to be functional
* tag 'ti-k3-config-for-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/nmenon/linux:
arm64: defconfig: Enable GPIO and I2C configs for TI's J721e platform
Link: https://lore.kernel.org/r/20201130174850.ni4sdyz3qp67j3sz@upstart
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This pull request contains ARM64 defconfig changes for 5.11, please pull
the following:
- Florian enables the ARM SCMI protocol, and the common clock, HWMON and
CPU frequency scaling drivers since those are used by ARCH_BRCMSTB
platforms
* tag 'arm-soc/for-5.11/defconfig-arm64' of https://github.com/Broadcom/stblinux:
arm64: defconfig: Enable ARM SCMI protocol and drivers
Link: https://lore.kernel.org/r/20201128163410.1691529-2-f.fainelli@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Enable the ARM SCMI protocol and the common clock, cpufreq, reset and
sensors drivers. Broadcom STB platforms (ARCH_BRCMSTB) implement SCMI to
provide support for CPU frequency scaling, clock configuration and
temperature and current sensors.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
arm64: tegra: Default configuration changes for v5.11-rc1
The Tegra234 VDK support that was introduced in v5.10-rc1 is now enabled
by default.
* tag 'tegra-for-5.11-arm64-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: defconfig: Enable Tegra234 support
Link: https://lore.kernel.org/r/20201127144329.124891-6-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add ARCH_BCM4908 config that can be used for compiling DTS files.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Renesas ARM defconfig updates for v5.11
- Enable support for the new R-Car V3U SoC in the arm64 defconfig,
- Refresh shmobile_defconfig for v5.10-rc1.
* tag 'renesas-arm-defconfig-for-v5.11-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
arm64: defconfig: Enable R8A779A0 SoC
ARM: shmobile: defconfig: Refresh for v5.10-rc1
Link: https://lore.kernel.org/r/20201113150854.3923885-2-geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The Qualcomm SCM driver was never explicitly enabled in the defconfig.
Instead it was (apparently) selected by DRM_MSM and by the recent change
to make it tristate now became =m.
Unfortunately this removes the ability for PINCTRL_MSM and ARM_SMMU to
be =y and with deferred_probe_timeout defaulting to 0 this means that
things such as UART, USB, PCIe and SDHCI probes with their dependencies
ignored.
The lack of pinctrl results in invalid pin configuration and the lack of
iommu results in the system locking up as soon as any form of data
transfer is attempted from any of the affected peripherals.
Mark QCOM_SCM as builtin, to avoid this.
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Cc: John Stultz <john.stultz@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20201118162528.454729-1-bjorn.andersson@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Add configs to enable regulators that supply power to the SD card
on TI's J721e platform. These regulators are controlled by either
SoC gpios or gpios over i2c expander.
Changes to vmlinux size:
Before:
text data bss dec hex filename
20219067 10875634 523924 31618625 1e27641 vmlinux
After:
text data bss dec hex filename
20228755 10880422 524628 31633805 1e2b18d vmlinux
delta: 15180 (dec)
Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Acked-by: Tero Kristo <t-kristo@ti.com>
Link: https://lore.kernel.org/r/20201103190821.30937-1-faiz_abbas@ti.com
The Qualcomm Command DB driver seems to have been indirectly enabled by
the Qualcomm DRM driver and up until the introduction of '778279f4f5e4
("soc: qcom: cmd-db: allow loading as a module")' this resulted in the
driver "always" being builtin on arm64. But with the introduction of
said change it, and all other RPMH related drivers, becomes =m.
The immediate result is that the uart driver fails to probe, which
depending on userspace's dependency on the presence of /dev/console
might be fatal. For systems getting past this the default timeout of 0
seconds for probe deferral of many subsystems causes the system to be
completely useless.
So, make Command DB builtin.
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20201103010850.757500-1-bjorn.andersson@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
The i.MX8M Nano supports the EASRC driver, and it requires ASRC.
Enable both of them as modules.
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The i.MX8M Mini has micfil and SPDIF support but the drivers
are not being loaded.
This patch updates the defconfig to add support for these drivers.
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
i.MX SoC GPIO driver provides the basic functions of GPIO pin operations
and IRQ operations, it is now changed from "def_bool y" to "tristate", so
it should be explicitly enabled to make sure all consumers work normally.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Pull ARM SoC defconfig updates from Olof Johansson:
"We keep this in a separate branch to avoid cross-branch conflicts, but
most of the material here is fairly boring -- some new drivers turned
on for hardware since they were merged, and some refreshed files due
to time having moved a lot of entries around"
* tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (33 commits)
ARM: multi_v7_defconfig: add FMC2 EBI controller support
arm64: defconfig: enable Qualcomm ASoC modules
arm64: defconfig: qcom: enable GPU clock controller for SM8[12]50
arm64: defconfig: enable INTERCONNECT for Qualcomm chipsets
arm64: defconfig: enable the sl28cpld board management controller
arm64: defconfig: Enable the eLCDIF and Raydium RM67191 drivers
arm64: defconfig: Enable Qcom SNPS Femto PHY
ARM: configs: Update Realview defconfig
ARM: configs: Update Versatile defconfig
ARM: config: aspeed_g5: Enable IBM OP Panel driver
ARM: config: aspeed-g5: Enable I2C GPIO mux driver
ARM: config: aspeed: Fix selection of media drivers
arm64: defconfig: Enable Samsung S3FWRN5 NFC driver
ARM: omap2plus_defconfig: enable generic net options
ARM: omap2plus_defconfig: enable twl4030_madc as a loadable module
arm64: defconfig: Enable clock driver for ROHM BD718x7 PMIC
arm64: defconfig: Build ADMA and ACONNECT driver
arm64: defconfig: Build AHUB component drivers
arm64: defconfig: Enable Lontium LT9611 driver
arm64: defcondfig: Enable USB ACM and FTDI drivers
...
Qualcomm ARM64defconfig updates for v5.10
Enable Qualcomm related drivers for Lontium LT9611 HDMI bridge, SNPS
high-speed USB PHY, various Interconnect providers, GPU clock
controllers for SM8150 and SM8250 and audio driver for MSM8996 and
APQ8016.
Then enable ACM and FTDI host drivers, which are useful when working
with various development boards using ARM64 hosts.
* tag 'qcom-arm64-defconfig-for-5.10' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
arm64: defconfig: enable Qualcomm ASoC modules
arm64: defconfig: qcom: enable GPU clock controller for SM8[12]50
arm64: defconfig: enable INTERCONNECT for Qualcomm chipsets
arm64: defconfig: Enable Qcom SNPS Femto PHY
arm64: defconfig: Enable Lontium LT9611 driver
arm64: defcondfig: Enable USB ACM and FTDI drivers
Link: https://lore.kernel.org/r/20200924040708.180352-1-bjorn.andersson@linaro.org
Signed-off-by: Olof Johansson <olof@lixom.net>
i.MX defconfig update for 5.10:
- Enable i.MX6SLL, i.MX7ULP SoC and CAAM crypto driver support in
multi_v7_defconfig.
- Enable the eLCDIF and Raydium RM67191 driver in arm64 defconfig to
support MIPI DSI on imx8mq-evk.
- Enable NWL DSI host controller, dphy and SITRONIX ST7703 panel driver
in arm64 defconfig to support display on imx8mq-librem5-devkit.
- Enable sl28cpld board management controller driver support in arm64
defconfig.
- Enable i.MX8M SoCs support in imx_v6_v7_defconfig as they can run in
AArch32 mode.
* tag 'imx-defconfig-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: defconfig: enable the sl28cpld board management controller
arm64: defconfig: Enable the eLCDIF and Raydium RM67191 drivers
arm64: defconfig: Enable imx8mq-librem5-devkit display stack
arm64: defconfig: re-sync DRM related defconfig bits
ARM: imx_v6_v7_defconfig: Support i.MX8MN/P/Q
ARM: multi_v7_defconfig: Enable i.MX7ULP SoC
ARM: multi_v7_defconfig: Enable i.MX6SLL SoC
ARM: multi_v7_defconfig: enable caam crypto module
Link: https://lore.kernel.org/r/20200923073009.23678-6-shawnguo@kernel.org
Signed-off-by: Olof Johansson <olof@lixom.net>
Samsung defconfig changes for v5.10
1. Re-enable platform media drivers as new dependency on
MEDIA_PLATFORM_SUPPORT appeared.
2. Enable ROHM BD718x7 PMIC present on some of boards with i.MX 8 SoCs.
3. Enable Samsung S3FWRN5 NFC driver present on TM2/TM2E boards.
* tag 'samsung-defconfig-5.10' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
arm64: defconfig: Enable Samsung S3FWRN5 NFC driver
arm64: defconfig: Enable clock driver for ROHM BD718x7 PMIC
ARM: exynos_defconfig: enable platform media drivers
Link: https://lore.kernel.org/r/20200920160705.9651-2-krzk@kernel.org
Signed-off-by: Olof Johansson <olof@lixom.net>
arm64: tegra: Default configuration updates for v5.10-rc1
This pair of patches enable the ADMA, ACONNECT and AHUB drivers that
are required for audio support on Tegra210 and later.
* tag 'tegra-for-5.10-arm64-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: defconfig: Build ADMA and ACONNECT driver
arm64: defconfig: Build AHUB component drivers
Link: https://lore.kernel.org/r/20200918150303.3938852-6-thierry.reding@gmail.com
Signed-off-by: Olof Johansson <olof@lixom.net>
Enable the kernel modules for the board management controller "sl28cpld"
which is used on the SMARC-sAL28 board.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Select the eLCDIF display controller and Raydium RM67191 panel drivers,
so that MIPI DSI can be functional by default on a imx8mq-evk board.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The ROHM BD718x7 PMIC is present on many designs with i.MX 8M SoCs.
Enable the bd718x7 clock driver which provides PMICs 32 kHz clock.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
This commit builds ADMA and ACONNECT drivers which can be used on
Tegra210 and later platforms to transfer audio data to/from AHUB
(Audio Hub).
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
