ARM: dts: zynq: DT changes for v5.11
- Adding support for Zturn-v5
- Small DT changes to clean errors from dt_binding_check
* tag 'zynq-dt-for-v5.10' of https://github.com/Xilinx/linux-xlnx:
ARM: zynq: Fix incorrect reference to XM013 instead of XM011
ARM: zynq: Convert at25 binding to new description on zc770-xm013
ARM: zynq: Fix OCM mapping to be aligned with binding on zc702
ARM: zynq: Fix leds subnode name for zc702/zybo-z7
ARM: zynq: Rename bus to be align with simple-bus yaml
ARM: zynq: Fix compatible string for adi,adxl345 chip
ARM: zynq: Add Z-turn board V5
ASPEED device tree updates for 5.11
- New machines
* Bytedance G220A, an AST2500 BMC for an x86 server
* Facebook Galaxy100, an AST2400 BMC for a network switch
* IBM Rainier 4U, an AST2600 BMC for a PowerPC server
- Reworking of Facebook device trees to use common dtsi
- A 64MB flash layout used by the G220A
- Misc updates to tiogapass, ethanolx, s2600wf, tacoma and rainier
* tag 'aspeed-5.11-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed: (25 commits)
ARM: dts: aspeed: ast2600evb: Add MAC0
ARM: dts: aspeed: rainier: Don't shout addresses
ARM: dts: aspeed: rainier: Mark FSI SPI controllers as restricted
ARM: dts: tacoma: Add reserved memory for ramoops
ARM: dts: rainier: Add reserved memory for ramoops
ARM: dts: tacoma: Fix node vs reg mismatch for flash memory
ARM: dts: aspeed: rainier: Add 4U device-tree
arm: dts: aspeed: tiogapass: Enable second MAC
ARM: dts: aspeed: minipack: Fixup I2C tree
ARM: dts: aspeed: wedge400: Fix FMC flash0 layout
ARM: dts: aspeed: Add Facebook Galaxy100 (AST2400) BMC
ARM: dts: aspeed: wedge100: Use common dtsi
ARM: dts: aspeed: wedge40: Use common dtsi
ARM: dts: aspeed: Common dtsi for Facebook AST2400 Network BMCs
ARM: dts: aspeed: amd-ethanolx: Add GPIO line names
ARM: dts: aspeed: amd-ethanolx: Enable devices for the iKVM functionality
ARM: dts: aspeed: amd-ethanolx: Enable KCS channel 3
ARM: dts: aspeed: tiogapass: Remove vuart
ARM: dts: Fix label address for 64MiB OpenBMC flash layout
ARM: dts: aspeed: g220a: Add some gpios
...
Link: https://lore.kernel.org/r/CACPK8Xfd7AmuEaUdFfYLu4ktcrpTnYUgwQSxUbC-McB02hvo_g@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
i.MX device tree update for 5.11:
- New board support: imx6dl-alti6p, imx6dl-lanmcu, mx6qp-prtwd3,
imx6ul-phytec-segin and imx7d-flex-concentrator.
- Fix schema warnings for pwm-leds, watchdog and GPIO hog devices.
- A few patches from Krzysztof Kozlowski to correct compatibles for
i.MX6/7 boards.
- A series from Matthias Schiffer to polish imx7-mba7 board support.
- Update i.MX6/7 device trees for fsl,stop-mode support.
- Correct fsl,rcpm-wakeup of LS1021A to get flextimer wake-up work.
- A series of patch from Stefan Riedmueller to update phytec and segin
devices.
- Other small and random changes.
* tag 'imx-dt-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (40 commits)
ARM: dts: imx28: Fix label name for L2 switch
ARM: dts: add Protonic WD3 board
ARM: dts: imx6qdl-kontron-samx6i: increase i2c-frequency
ARM: dts: imx7: add support for kamstrup flex concentrator
ARM: dts: ls1021a: update calibration table for TMU module
ARM: dts: ls1021a: fix rcpm failed to claim resource
ARM: dts: ls1021a: fix flextimer failed to wake system
ARM: dts: imx50-kobo-aura: Enable eKTF2132 touchscreen
ARM: dts: imx: Change flexcan node name to "can"
ARM: dts: imx6q-pico: fix board compatibles
ARM: dts: add Van der Laan LANMCU board
ARM: dts: add Altesco I6P board
ARM: dts: imx6ul: segin: peb-av-02: Mark stmpe touch as wakeup-source
ARM: dts: imx6ul: phytec: Add support for optional PEB-AV-02 LCD adapter
ARM: dts: imx6ul: segin: Add phyBOARD-Segin with eMMC phyCORE-i.MX6UL
ARM: dts: imx50-kobo-aura: Add 'grp' suffix to pinctrl node names
ARM: dts: imx: add usb alias
ARM: dts: imx6/7: sync fsl,stop-mode with current flexcan driver
ARM: dts: imx: Fix schema warnings for pwm-leds
ARM: dts: imx7s-warp: correct vendor in compatible to Element14
...
Link: https://lore.kernel.org/r/20201202142717.9262-4-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Samsung DTS ARM changes for v5.11, part two
1. Add devicetree of Samsung Galaxy Note 10.1 tablets
(GT-N8010/GT-N8013), called P4 Note. These are quite old but
still functional devices, based on Exynos4412.
2. Minor cleanups in Odroid XU3 Ethernet.
3. Minor fixes: ADC io-channel-ranges and P4 Note touchscreen GPIO
polarity.
* tag 'samsung-dt-5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: dts: exynos: switch Atmel mxt reset GPIO to active low on P4 Note
ARM: dts: s5pv210: Drop unneeded io-channel-ranges property in Aries
ARM: dts: s5pv210: Drop incorrect use of io-channel-ranges property
ARM: dts: exynos: Drop incorrect use of io-channel-ranges
ARM: dts: exynos: add Samsung's Exynos4412-based P4 Note boards
dt-bindings: arm: samsung: document bindings for P4 Note family board
ARM: dts: exynos: Add an alias for the Ethernet interface on Odroid XU3
ARM: dts: exynos: Fix Ethernet interface description on Odroid XU3
Link: https://lore.kernel.org/r/20201201204404.22675-2-krzk@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Protonic WD3 is a proof of concept platform for tractor e-cockpit applications
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This adds support for the OMNIA Flex Concentrator product
from Kamstrup A/S. It's providing radio mesh communication
infrastructure for smart electricity meters.
Kamstrup OMNIA is a modular and scalable smart grid platform.
Signed-off-by: Bruno Thomsen <bruno.thomsen@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
MikroTik CRS328-4C-20S-4S board has a switch chip with an integrated
Marvell Prestera 98DX3236 CPU.
This commit includes two board variants, namely the factory
default one and a Bit variant. The Bit variant has a
bigger Macronix flash.
This device tree includes basic Linux support.
Signed-off-by: Luka Kovacic <luka.kovacic@sartura.hr>
Cc: Luka Perkov <luka.perkov@sartura.hr>
Cc: Jakov Petrina <jakov.petrina@sartura.hr>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
MikroTik CRS305-1G-4S board has a switch chip with an integrated
Marvell Prestera 98DX3236 CPU.
This commit includes two board variants, namely the factory
default one and a Bit variant. The Bit variant has a
bigger Macronix flash.
This device tree includes basic Linux support.
Signed-off-by: Luka Kovacic <luka.kovacic@sartura.hr>
Cc: Luka Perkov <luka.perkov@sartura.hr>
Cc: Jakov Petrina <jakov.petrina@sartura.hr>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
MikroTik CRS326-24G-2S board has a switch chip with an integrated
Marvell Prestera 98DX3236 CPU.
This commit includes two board variants, namely the factory
default one and a Bit variant. The Bit variant has a
bigger Macronix flash.
This device tree includes basic Linux support.
Signed-off-by: Luka Kovacic <luka.kovacic@sartura.hr>
Cc: Luka Perkov <luka.perkov@sartura.hr>
Cc: Jakov Petrina <jakov.petrina@sartura.hr>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
ARM: tegra: Device tree changes for v5.11-rc1
This adds support for the Tegra30-based Ouya game console and enhances a
number of existing device trees. It also fixes a couple of minor issues
that were found during DT validation.
* tag 'tegra-for-5.11-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: (23 commits)
ARM: tegra: Add EMC OPP and ICC properties to Tegra124 EMC and ACTMON device-tree nodes
ARM: tegra: Add EMC OPP and ICC properties to Tegra30 EMC and ACTMON device-tree nodes
ARM: tegra: Add EMC OPP properties to Tegra20 device-trees
ARM: tegra: Add nvidia,memory-controller phandle to Tegra20 EMC device-tree
ARM: tegra: Add interconnect properties to Tegra124 device-tree
ARM: tegra: Add interconnect properties to Tegra30 device-tree
ARM: tegra: Add interconnect properties to Tegra20 device-tree
ARM: tegra: acer-a500: Add Embedded Controller
ARM: tegra: Change order of SATA resets for Tegra124
ARM: tegra: Correct EMC registers size in Tegra20 device-tree
ARM: tegra: Properly align clocks for SOCTHERM
ARM: tegra: Hook up edp interrupt on Tegra124 SOCTHERM
ARM: tegra: Add missing hot temperatures to Tegra124 thermal-zones
ARM: tegra: Add missing gpu-throt-level to Tegra124 soctherm
ARM: tegra: Populate OPP table for Tegra20 Ventana
ARM: tegra: nexus7: Use panel-lvds as the only panel compatible
ARM: tegra: nexus7: Rename gpio-hog nodes
ARM: tegra: nexus7: Add power-supply to lvds-encoder node
ARM: tegra: nexus7: Improve CPU passive-cooling threshold
ARM: tegra: nexus7: Correct thermal zone names
...
Link: https://lore.kernel.org/r/20201127144329.124891-4-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The Ouya was the sole device produced by Ouya Inc in 2013.
It was a game console originally running Android 5 on top of Linux 3.1.10.
This patch adds the device tree supporting the Ouya.
It has been tested on the original variant with Samsung ram.
Signed-off-by: Peter Geis <pgwipeout@gmail.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Adding Z-turn board V5 to resolve the change between:
"Z-TURNBOARD_schematic.pdf" schematics state version 1 to 4 has Atheros AR8035
"Z-Turn_Board_sch_V15_20160303.pdf" schematics state version 5 has Micrel KSZ9031
Changes v1 -> v2: Instead of using new board, the v2 using a common devicetree
for z-turn boards (zynq-zturn-common.dtsi) and for each board a specific DT
Signed-off-by: Alexandre GRIVEAUX <agriveaux@deutnet.info>
Link: https://lore.kernel.org/r/20201126070516.85882-1-agriveaux@deutnet.info
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
The Quanta GSJ BMC uses the Nuvoton NPCM730 SoC.
Included features:
1. Image partitions
2. PWM fan controller
3. USB device
4. Serial port
5. FIU
6. LEDs and GPIOs
Signed-off-by: Fran Hsu <Fran.Hsu@quantatw.com>
Reviewed-by: Benjamin Fair <benjaminfair@google.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Altesco (Altus-Escon-Company BV) I6P is a part of the diagnostic system
for the vehicle inspection stations.
Co-developed-by: David Jander <david@protonic.nl>
Signed-off-by: David Jander <david@protonic.nl>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add a PHYTEC phyBOARD-Segin full featured with phyCORE-i.MX 6UL with
eMMC and following features:
- i.MX 6UL
- 512 MB RAM
- eMMC
- USB Host/OTG
- 2x 100 Mbit/s Ethernet
- RS232
- CAN
Signed-off-by: Yunus Bas <y.bas@phytec.de>
Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The NanoPi R1 is a complete open source board developed
by FriendlyElec for makers, hobbyists, fans and etc.
NanoPi R1 key features
- Allwinner H3, Quad-core Cortex-A7@1.2GHz
- 512MB/1GB DDR3 RAM
- 8GB eMMC
- microSD slot
- 10/100/1000M Ethernet x 1
- 10/100 Ethernet x 1
- Wifi 802.11b/g/n
- Bluetooth 4.0
- Serial Debug Port
- 5V 2A DC power-supply
Signed-off-by: Yu-Tung Chang <mtwget@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20201102100157.85801-2-mtwget@gmail.com
The Elimo Engineering Initium is an Open Source Hardware Single Board
Computer based on the Elimo Impetus SoM.
It is meant as the first development platform for the Impetus, providing
convenient access to the peripherals on the Impetus.
It provides:
USB-C power input
UART-to-USB bridge on the USB-C connector, connected to UART1
USB-A connector for USB2.0 (Host, Device, OTG)
Audio Line In/Out
Pin header to access all signals on the M2 connector of the SoM
Signed-off-by: Matteo Scordino <matteo.scordino@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20201105183231.12952-4-matteo.scordino@gmail.com
ARM: DT: Hisilicon ARM32 SoCs DT updates for 5.10 (take two)
- Fix the system controller compatible for the hi3620 and hip04 SoCs
- Add the basic device tree for the hisilicon SD5203 SoC
* tag 'hisi-arm32-dt-for-5.10-tag2' of git://github.com/hisilicon/linux-hisi:
ARM: dts: hisilicon: add SD5203 dts
ARM: dts: hisilicon: fix the system controller compatible nodes
Link: https://lore.kernel.org/r/5F742717.5080405@hisilicon.com
Signed-off-by: Olof Johansson <olof@lixom.net>
A few more DT patches for 5.10, to support simple-framebuffer on the v3s
and the pinecube board
* tag 'sunxi-dt-for-5.10-2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
ARM: dts: sun8i: v3s: Add simple-framebuffer
ARM: dts: sun8i: s3l: add support for Pine64 PineCube IP camera
dt-bindings: arm: sunxi: add Pine64 PineCube binding
ARM: dts: sun8i: V3/V3s/S3/S3L: add pinctrl for I2C1 at PE bank
ARM: dts: sun8i: V3/V3s/S3/S3L: add pinctrl for 8-bit parallel CSI
ARM: dts: sun8i: V3/V3s/S3/S3L: add CSI1 device node
ARM: dts: sun8i: V3/V3s/S3/S3L: add pinctrl for UART2 RX/TX
ARM: dts: sun8i: V3/V3s/S3/S3L: add Ethernet support
Link: https://lore.kernel.org/r/e7c12b59-8603-438d-908b-5f0bde2c8697.lettre@localhost
Signed-off-by: Olof Johansson <olof@lixom.net>
Actions Semi ARM DT for v5.10:
- Add devicetree support for Caninos Loucos Labrador SBC manufactured
by Laboratory of Integrated Technological Systems (LSI-TEC), Brazil.
This board is based on Actions Semi S500 SoC. More information about
this board can be found in their website: https://caninosloucos.org/en/
- Fix PPI interrupt specifiers for peripherals attached to Cortex-A9 CPU
- Add devicetree support for RoseapplePi SBC manufactured by Roseapple Pi
team in Taiwan. This board is based on Actions Semi S500 SoC.
More information about this board can be found in their website:
http://roseapplepi.org/
* tag 'actions-arm-dt-for-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/mani/linux-actions:
ARM: dts: owl-s500: Add RoseapplePi
ARM: dts: owl-s500: Fix incorrect PPI interrupt specifiers
ARM: dts: Add Caninos Loucos Labrador v2
Link: https://lore.kernel.org/r/20200922113712.GB11251@Mani-XPS-13-9360
Signed-off-by: Olof Johansson <olof@lixom.net>
The Pine64 PineCube IP camera is an IP camera with SoChip S3 SoC.
It comes with a main board, an expansion board and a camera.
The main board features a Micro-USB power-only jack, a USB Type-A port,
an Ethernet port connected to the internal PHY of the SoC and a Realtek
RTL8189ES SDIO Wi-Fi module. A RGB LCD connector is reserved on the
board.
The expansion board features a TF slot, a microphone, a speaker
connector with on-board amplifier and a few IR LEDs.
Add support for the kit, with features on the main board and the
expansion board now.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20200923010215.148819-2-icenowy@aosc.io
i.MX arm32 device tree change for 5.10:
- New board/device support: Tolino Shine 2 HD, TQMa6 SoM, Y Soft IOTA
Orion board.
- update GPMI NAND node name to nand-controller for aligning with DT
schema.
- Remove the legacy fsl,spi-num-chipselects property from a few board.
- A series to update imx6q-logicpd support, using GPIO chipselect,
adding board compatible string, and enabling DTB build for the board.
- Complete RNG device node in i.MX6SL device tree, and add RNG node for
i.MX6SLL and i.MX6ULL.
- Correct interrupt flags for imx6qdl-gw5xxx boards.
- Add missing enet_out clock for i.MX6Q/DL Ethernet device.
- Enable PCIe support for imx6qp-sabreauto board.
- A series from Shengjiu Wang to add audio sound card for imx7d-sdb and
imx6sll-evk board, add headphone detection for sound card on a few NXP
development boards.
- A couple of minor fix-ups on i.MX25 pin functions.
- Some random update on various boards.
* tag 'imx-dt-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (37 commits)
ARM: dts: imx6qdl-gw5xxx: correct interrupt flags
ARM: dts: imx6q-logicpd: Use GPIO chipselect
ARM: dts: imx: Add an entry for imx6q-logicpd.dtb
ARM: dts: imx6q-logicpd: Add a specific board compatible string
ARM: dts: imx6q: align GPIO hog names with dtschema
ARM: dts: imx6qdl-tqma6: fix LM75 compatible string
ARM: dts: imx6qdl-tqma6: remove obsolete fsl,spi-num-chipselects
ARM: dts: imx6qdl-tqma6: fix indentation
ARM: dts: imx28-m28: Align GPMI NAND node name with schema
ARM: dts: imx6qdl: add enet_out clk support
ARM: dts: imx6qdl: move iomuxc compatible assignment out of root node
ARM: dts: vf: Fix PCA95xx GPIO expander properties on ZII CFU1
ARM: dts: imx: add devicetree for Tolino Shine 2 HD
ARM: dts: imx6qdl-gw553x: Remove unneeded #address-cells/#size-cells
ARM: dts: imx6sll-evk: Add audio sound card node
ARM: dts: imx6sl-evk: Add headphone detection for sound card
ARM: dts: imx6sx-sdb: Add headphone detection for sound card
ARM: dts: imx6q-kontron-samx6i: Remove old fsl,spi-num-chipselects
ARM: dts: imx: Fix the SPI chipselect polarity
ARM: dts: imx25-pinfunc: Fix GPT function names
...
Link: https://lore.kernel.org/r/20200923073009.23678-4-shawnguo@kernel.org
Signed-off-by: Olof Johansson <olof@lixom.net>
Add support for Seeed Studio's stm32mp157c odyssey board.
Board consists of SoM with stm32mp157c with 4GB eMMC and 512 MB DDR3 RAM
and carrier board with USB and ETH interfaces, SD card connector,
wifi and BT chip AP6236.
In this patch only basic kernel boot is supported and interfacing
SD card and on-board eMMC.
Signed-off-by: Marcin Sloniewski <marcin.sloniewski@gmail.com>
Reviewed-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Add an entry for imx6q-logicpd.dtb so that it can be built by default.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This pull request contains Broadcom ARM-based SoCs changes for 5.10,
please pull the following:
- Christian adds support for the Cisco Meraki MR32 which is based on the
BCM53016 SoC, this requires specifying the PWM, second UART and third
PCIe controller in Device Tree before finally adding support for the
board.
- Adrian updates the status properties from "ok" to "okay".
- Andre fixes the SP805 watchdog nodes to have the correct clock names
and binding for both the Cygnus and Northstar Plus (NSP). He does the
same thing with the SP804 timer node which was missing an
"arm,primecell" compatible string.
- Maxime enables the BCM2711 (Raspberry Pi 4) display pipeline since all
DRM changes are ready.
* tag 'arm-soc/for-5.10/devicetree' of https://github.com/Broadcom/stblinux:
ARM: dts: broadcom: Fix SP804 node
ARM: dts: NSP: Fix SP805 clock-names
ARM: dts: Cygnus: Fix SP805 clocks
ARM: dts: NSP: replace status value "ok" by "okay"
ARM: BCM5301X: Add DT for Meraki MR32
ARM: dts: bcm2711: Enable the display pipeline
ARM: dts: BCM5301X: Specify pcie2 in the DT
ARM: dts: BCM5301X: Specify uart2 in the DT
ARM: dts: BCM5301X: Specify PWM in the DT
dt-bindings: ARM: add bindings for the Meraki MR32
Link: https://lore.kernel.org/r/20200912032153.1216354-1-f.fainelli@gmail.com
Signed-off-by: Olof Johansson <olof@lixom.net>
add support for the Cisco Meraki MR32.
This is a dual-band enterprise class 802.11ac access point.
The unit was donated by Chris Blake. Thank you!
SoC: Broadcom BCM53016A1 (1 GHz, 2 cores)
RAM: 128 MiB
NAND: 128 MiB Spansion S34ML01G2 (~114 MiB useable)
ETH: 1GBit Ethernet Port - PoE
WIFI1: Broadcom BCM43520 an+ac (2x2:2 - id: 0x4352)
WIFI2: Broadcom BCM43520 bgn (2x2:2 - id: 0x4352)
WIFI3: Broadcom BCM43428 abgn (1x1:1 - id: 43428)
BLE: Broadcom BCM20732 (ttyS1)
LEDS: 1 x Programmable RGB Status LED (driven by a PWM)
1 x White LED (GPIO)
1 x Orange LED Fault Indicator (GPIO)
2 x LAN Activity / Speed LEDs (On the RJ45 Port)
BUTTON: one Reset button
MISC: AT24C64 8KiB EEPROM (i2c - stores Ethernet MAC)
ina219 hardware monitor (i2c)
Kensington Lock
SERIAL:
WARNING: The serial port needs a TTL/RS-232 3V3 level converter!
The Serial setting is 115200-8-N-1. The board has a populated
right angle 1x4 0.1" pinheader.
The pinout is: VCC, RX, TX, GND.
Odd stuff:
- uart0 clock frequency is 62.5 MHz.
- The LEDs are labeled as SYS-LED1 through SYS-LED3
because of the silkscreen on the PCB.
- the original u-boot has been compiled with most functions
and commands disabled. The u-boot env isn't setup properly
either and as a result, the bcm47xxpart probing is not
working. Hence, the nand partitions are specified through a
"fixed-partition" binding.
- The "WICED SMART(TM)" Bluetooth LE 4.0 BCM20732 chip is
connected to uart2 of the SoC. The BCM20732 does not
provide a HCI. So the linux' bluetooth stack is useless.
The mock-up node with the compatible binding and
enable-gpios property is provided solely as documentation.
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
This adds a devicetree for the Tolino Shine 2 HD Ebook reader. It is based
on boards marked with "37NB-E60QF0+4A2". It is equipped with an i.MX6SL
SoC.
Expected to work:
- Buttons
- Wifi
- Touchscreen
- LED
- uSD
- USB
- RTC
Not working due to missing drivers:
- Backlight (requires NTXEC driver)
- EPD
Not working due to unknown reasons:
- deep sleep (echo standby >/sys/power/state works),
wakeup fails when imx_gpc_pre_suspend(true) was called.
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
