gpio updates for v5.11-rc1
- several refactoring patches of the core gpiolib code
- add support for NXP PCAL9554B/C to gpio-pca953x
- allow probing mockup devices from device tree
- refactoring and improvements to gpio-rcar
- improvements to locking in gpio-tegra
- code shrink in gpiolib devres
- get the irq offset from device tree in gpio-sifive
- major refactoring of gpio-exar
- convert gpio-mvebu pwm access to regmap
- create a new submenu for virtual GPIO drivers
- fix clang fall-through warnings treewide
- minor driver refactoring and tweaks sprinkled all over
Vinod writes:
phy-for-5.11
- New phy drivers:
- Mediatek MT7621 PCIe PHY (promoted from staging)
- Ingenic USB phy driver supporting JZ4775 and X2000
- Intel Keem Bay USB PHY driver
- Marvell USB HSIC PHY driver supporting MMP3 SoC
- AXG MIPI D-PHY driver
- Updates:
- Conversion to YAML binding for:
- Broadcom SATA PHY
- Cadence Sierra PHY bindings
- STM32 USBC Phy
- Support for Exynos5433 PCIe PHY
- Support for Qualcomm SM8250 PCIe QMP PHY
- Support for Exynos5420 USB2 phy
- devm_platform_ioremap_resource conversion for bunch of drivers
* tag 'phy-for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (72 commits)
drm/mediatek: avoid dereferencing a null hdmi_phy on an error message
phy: ingenic: depend on HAS_IOMEM
phy: mediatek: statify mtk_hdmi_phy_driver
dt-bindings: phy: Convert Broadcom SATA PHY to YAML
devicetree: phy: rockchip-emmc add output-tapdelay-select
phy: rockchip-emmc: output tap delay dt property
PHY: Ingenic: Add USB PHY driver using generic PHY framework.
dt-bindings: USB: Add bindings for Ingenic JZ4775 and X2000.
USB: PHY: JZ4770: Remove unnecessary function calls.
devicetree: phy: rockchip-emmc: pulldown property
phy: rockchip: set pulldown for strobe line in dts
phy: renesas: rcar-gen3-usb2: disable runtime pm in case of failure
phy: mediatek: allow compile-testing the hdmi phy
phy/rockchip: Make PHY_ROCKCHIP_INNO_HDMI depend on HAS_IOMEM to fix build error
phy: samsung: Merge Kconfig for Exynos5420 and Exynos5250
phy: ralink: phy-mt7621-pci: set correct name in MODULE_DEVICE_TABLE macro
phy: ralink: phy-mt7621-pci: drop 'COMPILE_TEST' from Kconfig
phy: mediatek: Make PHY_MTK_{XSPHY, TPHY} depend on HAS_IOMEM and OF_ADDRESS to fix build errors
phy: tegra: xusb: Fix usb_phy device driver field
phy: amlogic: replace devm_reset_control_array_get()
...
Currently the optional property opp-shared is used within an opp table
to tell that a set of devices share their clock/voltage lines (and the
OPP points).
It is therefore possible to use an empty OPP table to convey only that
information, useful in situations where the opp points are provided via
other means (hardware. firmware, etc).
Update the documentation to remark this additional case and provide an
example.
Signed-off-by: Nicola Mazzucato <nicola.mazzucato@arm.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Memory controller drivers for v5.11 - Tegra SoC, part two
Continuation of work on Tegra SoC memory controllers towards adding
interconnect support and integration with devfreq.
This brings few more patches including one which removes/fixes annoying
warning if the DTS patches get applied. This is expected and only
informs that new features of Tegra memory controller drivers will not be
enabled however the warning itself could look worrying.
* tag 'memory-controller-drv-tegra-5.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl:
memory: tegra30: Support interconnect framework
memory: tegra20: Support hardware versioning and clean up OPP table initialization
dt-bindings: memory: tegra20-emc: Document opp-supported-hw property
Link: https://lore.kernel.org/r/20201207075758.5501-2-krzk@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Qualcomm driver updates for v5.11
This adds support for the core power domains on MSM8916, MSM8939, SDM660
and SDX55. It adds SM8150 support to the last-level cache controller
driver and it makes it possible to build the Command DB and RPMh drivers
as modules.
It also contains a slew of smaller cleanups, style and bug fixes
throughout the various drivers.
* tag 'qcom-drivers-for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (39 commits)
soc: qcom: rpmhpd: Add SDX55 power domains
dt-bindings: power: Add rpm power domain bindings for sdx55
soc: qcom: rpmh: Use __fill_rpmh_msg API during rpmh_write()
samples: qmi: Constify static qmi ops
soc: qcom: pdr: Constify static qmi structs
soc: qcom: initialize local variable
soc: qcom: socinfo: add soc ids for msm8953 variants
soc: qcom: geni: Remove "iova" check
soc: qcom: llcc: Add configuration data for SM8150
dt-bindings: msm: Add LLCC for SM8150
soc: qcom: rpmh: Fix possible doc-rot in rpmh_write()'s header
soc: qcom: kryo-l2-accessors: Fix misnaming of 'val'
soc: qcom: rpmhpd: Provide some missing struct member descriptions
soc: qcom: llcc-qcom: Fix expected kernel-doc formatting
soc: qcom: smp2p: Remove unused struct attribute provide another
soc: qcom: wcnss_ctrl: Demote non-conformant struct header and fix function headers
soc: qcom: smsm: Fix some kernel-doc formatting and naming problems
soc: qcom: smem: Fix formatting and missing documentation issues
soc: qcom: qcom-geni-se: Fix misnamed function parameter 'rx_rfr'
soc: qcom: qcom_aoss: Add missing description for 'cooling_devs'
...
Link: https://lore.kernel.org/r/20201130190142.345246-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Samsung DTS ARM changes for v5.11, part three
1. S3C bindings and DTS cleanup,
2. Correct the clock rates for SPI0 in Artik 5 which is a fix for recently
introduced Ethernet on SPI on Artik 5 board.
* tag 'samsung-dt-5.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: dts: exynos: Reduce assigned-clocks entries for SPI0 on Artik5 board
ARM: dts: s3c6410: correct SMDK6410 board compatible
ARM: dts: s3c24xx: add SMDK2416 board compatible
dt-bindings: arm: samsung: document S3C6410-based boards binding
dt-bindings: arm: samsung: document SMDK2416 board binding
Link: https://lore.kernel.org/r/20201207074528.4475-2-krzk@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Newly added boards are the PX30 SOM system from Engicam and Kobol Helios64.
The Scarlet tablet finally gets support for its cameras, now that the
the rk3399-isp moved out of staging.
The Odroid-Go-Advance got its joystick support now that the adc-joystick
driver was merged and misc omprovements to the RockPi4, rk3328-roc-cc
and orange-pi.
* tag 'v5.11-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (28 commits)
arm64: dts: rockchip: use USB host by default on rk3399-rock-pi-4
arm64: dts: rockchip: fix I2S conflict on rk3399-rock-pi-4
arm64: dts: rockchip: fix supplies on rk3399-rock-pi-4
arm64: dts: rockchip: Fix UART pull-ups on rk3328
arm64: dts: rockchip: add isp and sensors for Scarlet
arm64: dts: rockchip: add isp0 node for rk3399
arm64: dts: rockchip: Properly define the type C connector on rk3399-orangepi
arm64: dts: rockchip: Add BT support on px30-engicam
arm64: dts: rockchip: Add WiFi support on px30-engicam
arm64: dts: rockchip: Add Engicam PX30.Core C.TOUCH 2.0 10.1" OF
dt-bindings: arm: rockchip: Add Engicam PX30.Core C.TOUCH 2.0 10.1" OF
arm64: dts: rockchip: Enable LVDS panel on px30-engicam-edimm2.2
arm64: dts: rockchip: Enable USB Host, OTG on px30-enagicam
arm64: dts: rockchip: rename sdhci nodename to mmc on rk3399
arm64: dts: rockchip: Enable analog audio on rk3328-roc-cc
arm64: dts: rockchip: Enable HDMI audio on rk3328-roc-cc
arm64: dts: rockchip: Set dr_mode to "host" for OTG on rk3328-roc-cc
arm64: dts: rockchip: Add Engicam PX30.Core C.TOUCH 2.0
arm64: dts: rockchip: Add Engicam C.TOUCH 2.0
dt-bindings: arm: rockchip: Add Engicam PX30.Core C.TOUCH 2.0
...
Link: https://lore.kernel.org/r/4278011.LvFx2qVVIh@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Samsung DTS ARM changes for v5.11, part two
1. Add devicetree of Samsung Galaxy Note 10.1 tablets
(GT-N8010/GT-N8013), called P4 Note. These are quite old but
still functional devices, based on Exynos4412.
2. Minor cleanups in Odroid XU3 Ethernet.
3. Minor fixes: ADC io-channel-ranges and P4 Note touchscreen GPIO
polarity.
* tag 'samsung-dt-5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: dts: exynos: switch Atmel mxt reset GPIO to active low on P4 Note
ARM: dts: s5pv210: Drop unneeded io-channel-ranges property in Aries
ARM: dts: s5pv210: Drop incorrect use of io-channel-ranges property
ARM: dts: exynos: Drop incorrect use of io-channel-ranges
ARM: dts: exynos: add Samsung's Exynos4412-based P4 Note boards
dt-bindings: arm: samsung: document bindings for P4 Note family board
ARM: dts: exynos: Add an alias for the Ethernet interface on Odroid XU3
ARM: dts: exynos: Fix Ethernet interface description on Odroid XU3
Link: https://lore.kernel.org/r/20201201204404.22675-2-krzk@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This pull request contains Broadcom ARM64-based SoCs Device Tree changes
for 5.11, please pull the following:
- Rafal adds initial support for the Broadcom 4908 which are SoCs used
in home routers and are based on the DSL architecture and using
Broadcom Brahma-B53 CPUs.
* tag 'arm-soc/for-5.11/devicetree-arm64' of https://github.com/Broadcom/stblinux:
arm64: add config for Broadcom BCM4908 SoCs
arm64: dts: broadcom: add BCM4908 and Asus GT-AC5300 early DTS files
dt-bindings: arm: bcm: document BCM4908 bindings
Link: https://lore.kernel.org/r/20201128163410.1691529-4-f.fainelli@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This pull request contains Broadcom ARM-based SoCs changes for 5.11,
please pull the following:
- Vivek updates the Linksys EA9500 DTS by adding the two additional
switch port nodes (5 & 7), providing a flash partition layout to
make the device usable with OpenWrt, and finally switches to using
the pin controller rather than using mdio-mux to get the same outcome.
- Serge fixes the USB Device Tree nodes unit name to be conformant to
the recommended name patterns.
- Rafal re-arranges all the nodes that belonged to the CRU block to be
under the CRU node (such as PLLs). He also disables the USB3 PHY node
for devices that lack USB3 and adds USB3 support to the Luxul XWR-3150
DTS.
- Jonathan drops the incorrect 'io-channel-ranges' from the Cygnus SoC
DTSI.
- Maxime disables the Wi-Fi frequencies (around 2.4GHz) for HDMI on the
Raspberry Pi 4 due to some cross-talk between the two blocks.
- Pavel updates the DWC2 USB controller RX FIFO sizes to be more
accurate for all BCM283x (Raspberr Pi) SoCs.
- Florian updates all BCM5301x and NSP Device Tree files to allow
switching the Broadcom B53 Ethernet switch device tree binding to YAML.
* tag 'arm-soc/for-5.11/devicetree' of https://github.com/Broadcom/stblinux: (22 commits)
dt-bindings: net: dsa: b53: Add YAML bindings
ARM: dts: NSP: Provide defaults ports container node
ARM: dts: NSP: Add a SRAB compatible string for each board
ARM: dts: NSP: Fix Ethernet switch SGMII register name
ARM: dts: NSP: Update ethernet switch node name
ARM: dts: BCM5301X: Provide defaults ports container node
ARM: dts: BCM5301X: Add a default compatible for switch node
ARM: dts: BCM5301X: Update Ethernet switch node name
dt-bindings: net: dsa: Document sfp and managed properties
dt-bindings: net: dsa: Extend switch nodes pattern
ARM: dts: bcm283x: increase dwc2's RX FIFO size
ARM: dts: rpi-4: disable wifi frequencies
ARM: dts: Cygnus: Drop incorrect io-channel-ranges property.
ARM: dts: BCM5301X: Enable USB 3 PHY on Luxul XWR-3150
ARM: dts: BCM5301X: Disable USB 3 PHY on devices without USB 3
ARM: dts: BCM5301X: Move CRU devices to the CRU node
ARM: dts: BCM5301X: Linksys EA9500 make use of pinctrl
ARM: dts: BCM5301X: Use corretc pinctrl compatible for 4709x
ARM: dts: BCM5301X: Linksys EA9500 add fixed partitions
ARM: dts: BCM5310X: Harmonize xHCI DT nodes name
...
Link: https://lore.kernel.org/r/20201128163410.1691529-3-f.fainelli@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arm SMMU updates for 5.11, including support for the SMMU integrated
into the Adreno GPU as well as workarounds for the broken firmware
implementation in the DB845c SoC from Qualcomm.
* for-next/iommu/arm-smmu:
iommu: arm-smmu-impl: Add a space before open parenthesis
iommu: arm-smmu-impl: Use table to list QCOM implementations
iommu/arm-smmu: Move non-strict mode to use io_pgtable_domain_attr
iommu/arm-smmu: Add support for pagetable config domain attribute
iommu/io-pgtable-arm: Add support to use system cache
iommu/io-pgtable: Add a domain attribute for pagetable configuration
dt-bindings: arm-smmu: Add compatible string for Adreno GPU SMMU
iommu/arm-smmu: Add a way for implementations to influence SCTLR
iommu/arm-smmu-qcom: Add implementation for the adreno GPU SMMU
iommu/arm-smmu-v3: Assign boolean values to a bool variable
iommu/arm-smmu: Use new devm_krealloc()
iommu/arm-smmu-qcom: Implement S2CR quirk
iommu/arm-smmu-qcom: Read back stream mappings
iommu/arm-smmu: Allow implementation specific write_s2cr
If DT_SCHEMA_FILES is specified and contains more than one file paths,
'make dtbs_check' fails with the following message:
$ make dtbs_check DT_SCHEMA_FILES="path/to/schema1.yaml path/to/schema2.yaml"
SCHEMA Documentation/devicetree/bindings/processed-schema.json
Documentation/devicetree/bindings/Makefile:77: recipe for target 'Documentation/devicetree/bindings/processed-schema.json' failed
make[1]: *** [Documentation/devicetree/bindings/processed-schema.json] Error 255
make[1]: *** Deleting file 'Documentation/devicetree/bindings/processed-schema.json'
Makefile:1364: recipe for target 'dt_binding_check' failed
make: *** [dt_binding_check] Error 2
The error code 255 is returned by 'dt-mk-schema' when invoked as
'dt-mk-schema -j -u @<tmp-file>', where '<tmp-file>' is a temporary
file that is generated to contain a list of SPACE delimited schema
file paths, as indicated via DT_SCHEMA_FILES.
However, it seems the file format has been recently changed in
'dt-mk-schema', which now expects each schema path to be provided on
a separate line:
$ dt-mk-schema --version
2020.12.dev4+g6de1c45
Therefore, let's change '<tmp-file>' content format from
path/to/schema1.yaml path/to/schema2.yaml ... path/to/schemaN.yaml
to
path/to/schema1.yaml
path/to/schema2.yaml
...
path/to/schemaN.yaml
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@gmail.com>
Link: https://lore.kernel.org/r/2519b8bde507ca6ccea9765ea197adaaa69a66d5.1605712328.git.cristian.ciocaltea@gmail.com
Signed-off-by: Rob Herring <robh@kernel.org>
The GE2D is a 2D accelerator with various features like configurable blitter
with alpha blending, frame rotation, scaling, format conversion and colorspace
conversion.
This adds the bindings for the GE2D version found in the AXG SoCs Family.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
We want the fixes in here, and this resolves a merge issue with
drivers/misc/habanalabs/common/memory.c.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
