The GE2D is a 2D accelerator with various features like configurable blitter
with alpha blending, frame rotation, scaling, format conversion and colorspace
conversion.
This adds the bindings for the GE2D version found in the AXG SoCs Family.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Vcore and vio supplies are also part of the spec and used by many sensors.
Do not specify the voltages as they are generally sensor dependent.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
It was mentioned vana voltage is typically 2,8 volts. This is truly sensor
dependent, and nowadays 2,8 volts is a lot.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The bus-type property is required for C-PHY support. Add it, including
values for CCP2 and CSI-2 D-PHY.
Also require the bus-type property. Effectively all new sensors are MIPI
D-PHY or C-PHY that cannot be told apart without the bus-type property.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Amend the existing SMIA bindings by adding MIPI CCS support, with separate
compatible strings for CCS 1.0 and CCS 1.1. Rename the old bindings
accordingly as CCS is the current standard.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Generally reset signal is active low on camera sensors. The example had it
high. Make it low, and use GPIO_ACTIVE_LOW in gpio.h for that.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
nokia,nvm-size property was removed from the bindings but it was left in
the example. Remove it from the example, too.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
This remote ships with the Amlogic SML-5442TW IPTV/VOD Set-Top Box
used by O2.cz. This keymap adds support for the default IR controls.
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Add support of BT656 embedded synchronization bus mode in DCMI driver.
Add "bus-type" property and make it required so that there is no
ambiguity between parallel mode (bus-type=5) and BT656 mode (bus-type=6).
BT656 mode allows to save hardware synchro lines hsync & vsync by replacing
them with synchro codes embedded in data stream, hence hsync-active &
vsync-active properties are useless in this mode.
With DCMI, BT656 bus mode is only compatible with 8 bits width data bus.
Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
All the items in the TODO list were addressed, uapi was reviewed,
documentation written, checkpatch errors fixed, several bugs fixed.
There is no big reason to keep this driver in staging, so move it out.
Dt-bindings Verified with:
make ARCH=arm64 dt_binding_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/media/rockchip-isp1.yaml
Fields of MAINTAINERS file sorted according to output of
./scripts/parse-maintainers.pl --input=MAINTAINERS --output=MAINTAINERS
--order
[dt-bindings: media: rkisp1: move rockchip-isp1 bindings out of staging]
[dt-bindings: media: rkisp1: move rockchip-isp1 bindings out of staging]
[hverkuil: fix various checkpatch alignment warnings]
Signed-off-by: Helen Koike <helen.koike@collabora.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Convert to YAML and add generic IP core compatibles "cnm,codadx6",
"cnm,codahx4", "cnm,coda7541", and "cnm,coda960" in addition to the SoC
specific compatibles. The new generic compatibles are already used in
the SoC device trees and replace the free form comments. For example:
- compatible : should be "fsl,<chip>-src" for i.MX SoCs:
(a) "fsl,imx27-vpu" for CodaDx6 present in i.MX27
turns into:
properties:
compatible:
oneOf:
- items:
- const: fsl,imx27-vpu
- const: cnm,codadx6
This allows to properly specify the secondary JPEG unit interrupt that
is only present on cnm,coda960.
Also add the missing "fsl,imx6dl-vpu", "cnm,coda960" compatible.
The AXI bus connection to the internal SRAM is different between i.MX6Q
and i.MX6DL, which requires the driver to load a different firmware
depending on the SoC.
Further, specify the power-domain property for i.MX6 and change the
clock order from "ahb", "per" to "per", "ahb". This order is currently
used in all SoC device trees.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
In order to establish required properties based on the selected
bus type, make the 'bus-type' property mandatory. As this change
documents an endpoint property, also document the 'remote-endpoint'
one now that the 'endpoint' schema has been expanded.
Binary compatibility with existing DTB is kept as the driver does not
enforce the property to be present, and shall fall-back to default
parallel bus configuration, which was the only supported bus type, if
the property is not specified.
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
There were several files converted to yaml, but the .txt file
is still referenced somewhere else.
Update the references for them to point to the right file.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Venus needs to vote for the performance state of a power domain (cx)
to be able to support DVFS. This 'cx' power domain is controlled by
rpmh and is a common power domain (scalable) not specific to
venus alone. This is optional in the sense that, leaving this power
domain out does not really impact the functionality but just makes
the platform a little less power efficient.
Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Linux 5.9-rc7
* tag 'v5.9-rc7': (683 commits)
Linux 5.9-rc7
mm/thp: Split huge pmds/puds if they're pinned when fork()
mm: Do early cow for pinned pages during fork() for ptes
mm/fork: Pass new vma pointer into copy_page_range()
mm: Introduce mm_struct.has_pinned
mm: validate pmd after splitting
mm: don't rely on system state to detect hot-plug operations
mm: replace memmap_context by meminit_context
arch/x86/lib/usercopy_64.c: fix __copy_user_flushcache() cache writeback
lib/memregion.c: include memregion.h
lib/string.c: implement stpcpy
mm/migrate: correct thp migration stats
mm/gup: fix gup_fast with dynamic page table folding
mm: memcontrol: fix missing suffix of workingset_restore
mm, THP, swap: fix allocating cluster for swapfile by mistake
mm: slab: fix potential double free in ___cache_free
Documentation/llvm: Fix clang target examples
io_uring: ensure async buffered read-retry is setup properly
KVM: SVM: Add a dedicated INVD intercept routine
io_uring: don't unconditionally set plug->nowait = true
...
Add linux,autosuspend-period property for gpio ir receiver. Some cpuidle
systems wake from idle may take a bit long time, for such case, need
disable cpuidle temporarily.
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
