Commit Graph

7365 Commits

Author SHA1 Message Date
Christoph Lameter
9e2779fa28 is_vmalloc_addr(): Check if an address is within the vmalloc boundaries
Checking if an address is a vmalloc address is done in a couple of places.
Define a common version in mm.h and replace the other checks.

Again the include structures suck.  The definition of VMALLOC_START and
VMALLOC_END is not available in vmalloc.h since highmem.c cannot be included
there.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-05 09:44:14 -08:00
Richard Knutsson
9ab9898e32 pcmcia/pcnet_cs: fix 'shadow variable' warning
Fixing:
  CHECK   drivers/net/pcmcia/pcnet_cs.c
drivers/net/pcmcia/pcnet_cs.c:523:15: warning: symbol 'hw_info' shadows an earlier one
drivers/net/pcmcia/pcnet_cs.c:148:18: originally declared here

Signed-off-by: Richard Knutsson <ricknu-0@student.ltu.se>
Acked-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-05 09:44:09 -08:00
Richard Knutsson
cfd4734c1e pcmcia/fmvj18x_cs: fix 'shadow variable' warning
Fixing:
  CHECK   drivers/net/pcmcia/fmvj18x_cs.c
drivers/net/pcmcia/fmvj18x_cs.c:1205:6: warning: symbol 'i' shadows an earlier one
drivers/net/pcmcia/fmvj18x_cs.c:1179:9: originally declared here

Signed-off-by: Richard Knutsson <ricknu-0@student.ltu.se>
Acked-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-05 09:44:09 -08:00
Richard Knutsson
c61f26fa60 pcmcia/axnet_cs: make use of 'max()' instead of handcrafted one
Use 'max(x,y)' instead of 'x < y ? y : x'.

Signed-off-by: Richard Knutsson <ricknu-0@student.ltu.se>
Acked-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-05 09:44:09 -08:00
Richard Knutsson
6b2e43861b pcmcia/axnet_cs: make functions static
Fixing:
  CHECK   drivers/net/pcmcia/axnet_cs.c
drivers/net/pcmcia/axnet_cs.c:994:5: warning: symbol 'ax_close' was not declared. Should it be static?
drivers/net/pcmcia/axnet_cs.c:1017:6: warning: symbol 'ei_tx_timeout' was not declared. Should it be static?

Signed-off-by: Richard Knutsson <ricknu-0@student.ltu.se>
Acked-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-05 09:44:09 -08:00
Richard Knutsson
1569d9e89a pcmcia/3c574_cs: fix 'shadow variable' warning
Fixing:
  CHECK   drivers/net/pcmcia/3c574_cs.c
drivers/net/pcmcia/3c574_cs.c:695:7: warning: symbol 'i' shadows an earlier one
drivers/net/pcmcia/3c574_cs.c:636:6: originally declared here

Signed-off-by: Richard Knutson <ricknu-0@student.ltu.se>
Acked-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-05 09:44:08 -08:00
Olof Johansson
906da809c5 pcmcia: replace kio_addr_t with unsigned int everywhere
Remove kio_addr_t, and replace it with unsigned int.  No known architecture
needs more than 32 bits for IO addresses and ports and having a separate type
for it is just messy.

Signed-off-by: Olof Johansson <olof@lixom.net>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Matthew Wilcox <matthew@wil.cx>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-05 09:44:08 -08:00
Andrew Morton
96cf49a2c1 drivers/net/wireless/b43/main.c needs io.h
m68k:

drivers/net/wireless/b43/main.c:251: error: implicit declaration of function 'mmiowb'

Cc: "John W. Linville" <linville@tuxdriver.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-05 09:44:07 -08:00
Johann Felix Soden
2bfc79de2b [NET]: Remove further references to net-modules.txt
The Kconfig of igb and enc28j60 contains references to
obsolet Documentation/networking/net-modules.txt.

Signed-off-by: Johann Felix Soden <johfel@users.sourceforge.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-05 03:13:58 -08:00
Nathaniel Filardo
a26af1e08a tun: impossible to deassert IFF_ONE_QUEUE or IFF_NO_PI
From: "Nathaniel Filardo" <nwfilardo@gmail.com>

Taken from http://bugzilla.kernel.org/show_bug.cgi?id=9806

The TUN/TAP driver only permits one-way transitions of IFF_NO_PI or
IFF_ONE_QUEUE during the lifetime of a tap/tun interface.  Note that
tun_set_iff contains

 541         if (ifr->ifr_flags & IFF_NO_PI)
 542                 tun->flags |= TUN_NO_PI;
 543 
 544         if (ifr->ifr_flags & IFF_ONE_QUEUE)
 545                 tun->flags |= TUN_ONE_QUEUE;

This is easily fixed by adding else branches which clear these bits.

Steps to reproduce:

This is easily reproduced by setting an interface persistant using tunctl then
attempting to open it as IFF_TAP or IFF_TUN, without asserting the IFF_NO_PI
flag.  The ioctl() will succeed and the ifr.flags word is not modified, but the
interface remains in IFF_NO_PI mode (as it was set by tunctl).

Acked-by: Maxim Krasnyansky <maxk@qualcomm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-05 03:05:07 -08:00
Randy Dunlap
cd8d627a6b hamradio: fix dmascc section mismatch
hw[] is used in both init and exit functions so it cannot be initdata (section
mismatch is when CONFIG_MODULES=n and CONFIG_DMASCC=y).

WARNING: vmlinux.o(.exit.text+0xba7): Section mismatch: reference to .init.data: (between 'dmascc_exit' and 'sixpack_exit_driver')

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Klaus Kudielka <klaus.kudielka@gmx.net>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-05 03:04:05 -08:00
Roland Dreier
f33afc26dc IB: Avoid marking __devinitdata as const
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-02-04 20:20:44 -08:00
Jack Morgenstein
893da75956 mlx4_core: Don't read reserved fields in mlx4_QUERY_ADAPTER()
The firmware QUERY_ADAPTER command does not return vendor_id,
device_id, and revision_id; eliminate these fields from the query.

Initialize the rev_id field of the mlx4 device via init_node_data (MAD
IFC query), as is done in the query_device verb implementation.

Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-02-04 20:20:43 -08:00
Roland Dreier
e8f9b2ed98 mlx4_core: Fix more section mismatches
Commit 3d73c288 ("mlx4_core: Fix section mismatches") fixed some of
the section mismatches introduced when error recovery was added, but
there were still more cases of errory recovery code calling into
__devinit code from regular .text.  Fix this by getting rid of the
now-incorrect __devinit annotations.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-02-04 20:20:41 -08:00
Linus Torvalds
93890b71a3 Merge git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus
* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus: (25 commits)
  virtio: balloon driver
  virtio: Use PCI revision field to indicate virtio PCI ABI version
  virtio: PCI device
  virtio_blk: implement naming for vda-vdz,vdaa-vdzz,vdaaa-vdzzz
  virtio_blk: Dont waste major numbers
  virtio_blk: provide getgeo
  virtio_net: parametrize the napi_weight for virtio receive queue.
  virtio: free transmit skbs when notified, not on next xmit.
  virtio: flush buffers on open
  virtnet: remove double ether_setup
  virtio: Allow virtio to be modular and used by modules
  virtio: Use the sg_phys convenience function.
  virtio: Put the virtio under the virtualization menu
  virtio: handle interrupts after callbacks turned off
  virtio: reset function
  virtio: populate network rings in the probe routine, not open
  virtio: Tweak virtio_net defines
  virtio: Net header needs hdr_len
  virtio: remove unused id field from struct virtio_blk_outhdr
  virtio: clarify NO_NOTIFY flag usage
  ...
2008-02-04 08:00:54 -08:00
Linus Torvalds
f5bb3a5e9d Merge git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial
* git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial: (79 commits)
  Jesper Juhl is the new trivial patches maintainer
  Documentation: mention email-clients.txt in SubmittingPatches
  fs/binfmt_elf.c: spello fix
  do_invalidatepage() comment typo fix
  Documentation/filesystems/porting fixes
  typo fixes in net/core/net_namespace.c
  typo fix in net/rfkill/rfkill.c
  typo fixes in net/sctp/sm_statefuns.c
  lib/: Spelling fixes
  kernel/: Spelling fixes
  include/scsi/: Spelling fixes
  include/linux/: Spelling fixes
  include/asm-m68knommu/: Spelling fixes
  include/asm-frv/: Spelling fixes
  fs/: Spelling fixes
  drivers/watchdog/: Spelling fixes
  drivers/video/: Spelling fixes
  drivers/ssb/: Spelling fixes
  drivers/serial/: Spelling fixes
  drivers/scsi/: Spelling fixes
  ...
2008-02-04 07:58:52 -08:00
Dor Laor
6c0cd7c000 virtio_net: parametrize the napi_weight for virtio receive queue.
It is done in order to improve performance.

Signed-off-by: Dor Laor <dor.laor@qumranet.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2008-02-04 23:50:09 +11:00
Rusty Russell
2cb9c6bafc virtio: free transmit skbs when notified, not on next xmit.
This fixes a potential dangling xmit problem.

We also suppress refill interrupts until we need them.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2008-02-04 23:50:08 +11:00
Rusty Russell
a48bd8f670 virtio: flush buffers on open
Fix bug found by Christian Borntraeger: if the other side fills all
the registered network buffers before we enable NAPI, we will never
get an interrupt.  The simplest fix is to process the input queue once
on open.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2008-02-04 23:50:07 +11:00
Christian Borntraeger
e70f2f1bb8 virtnet: remove double ether_setup
Hello Rusty,

virtnet_probe already calls alloc_etherdev, which calls ether_setup.
There is no need to do that again.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2008-02-04 23:50:07 +11:00
Anthony Liguori
0ad07ec1fd virtio: Put the virtio under the virtualization menu
This patch moves virtio under the virtualization menu and changes virtio
devices to not claim to only be for lguest.

Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2008-02-04 23:50:05 +11:00
Rusty Russell
6e5aa7efb2 virtio: reset function
A reset function solves three problems:

1) It allows us to renegotiate features, eg. if we want to upgrade a
   guest driver without rebooting the guest.

2) It gives us a clean way of shutting down virtqueues: after a reset,
   we know that the buffers won't be used by the host, and

3) It helps the guest recover from messed-up drivers.

So we remove the ->shutdown hook, and the only way we now remove
feature bits is via reset.

We leave it to the driver to do the reset before it deletes queues:
the balloon driver, for example, needs to chat to the host in its
remove function.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2008-02-04 23:50:03 +11:00
Rusty Russell
b3369c1fb4 virtio: populate network rings in the probe routine, not open
Since we want to reset the device to remove them, this is simpler
(device is reset for us on driver remove).

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2008-02-04 23:50:03 +11:00
Rusty Russell
34a48579e4 virtio: Tweak virtio_net defines
1) Turn GSO on virtio net into an all-or-nothing (keep checksumming
   separate).  Having multiple bits is a pain: if you can't support something
   you should handle it in software, which is still a performance win.

2) Make VIRTIO_NET_HDR_GSO_ECN a flag in the header, so it can apply to
   IPv6 or v4.

3) Rename VIRTIO_NET_F_NO_CSUM to VIRTIO_NET_F_CSUM (ie. means we do
   checksumming).

4) Add csum and gso params to virtio_net to allow more testing.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2008-02-04 23:50:02 +11:00
Rusty Russell
50c8ea8080 virtio: Net header needs hdr_len
It's far easier to deal with packets if we don't have to parse the
packet to figure out the header length to know how much to pull into
the skb data.  Add the field to the virtio_net_hdr struct (and fix the
spaces that somehow crept in there).

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2008-02-04 23:50:02 +11:00
Rusty Russell
18445c4d50 virtio: explicit enable_cb/disable_cb rather than callback return.
It seems that virtio_net wants to disable callbacks (interrupts) before
calling netif_rx_schedule(), so we can't use the return value to do so.

Rename "restart" to "cb_enable" and introduce "cb_disable" hook: callback
now returns void, rather than a boolean.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2008-02-04 23:49:58 +11:00
Rusty Russell
a586d4f601 virtio: simplify config mechanism.
Previously we used a type/len pair within the config space, but this
seems overkill.  We now simply define a structure which represents the
layout in the config space: the config space can now only be extended
at the end.

The main driver-visible changes:
1) We indicate what fields are present with an explicit feature bit.
2) Virtqueues are explicitly numbered, and not in the config space.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2008-02-04 23:49:57 +11:00
Rusty Russell
f35d9d8aae virtio: Implement skb_partial_csum_set, for setting partial csums on untrusted packets.
Use it in virtio_net (replacing buggy version there), it's also going
to be used by TAP for partial csum support.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Acked-by: David S. Miller <davem@davemloft.net>
2008-02-04 23:49:56 +11:00
Joe Perches
726a645913 MAINTAINERS: remove Adam Fritzler, remove his email address in other sources
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Adrian Bunk <bunk@kernel.org>
2008-02-03 16:36:24 +02:00
Paulius Zaleckas
efad798b9f Spelling fixes: lenght->length
Signed-off-by: Paulius Zaleckas <pauliusz@yahoo.com>
Signed-off-by: Adrian Bunk <bunk@kernel.org>
2008-02-03 15:42:53 +02:00
Robert P. J. Day
14e4a0f2bb Fix a small number of "memeber" typoes.
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Adrian Bunk <bunk@kernel.org>
2008-02-03 15:12:15 +02:00
David S. Miller
a80f509f4a Merge branch 'fixes' of master.kernel.org:/pub/scm/linux/kernel/git/linville/wireless-2.6 2008-02-03 04:43:34 -08:00
Bryan Wu
9dc7f30e3b EMAC driver: Fix bug: The clock divisor is set to all ones at reset.
Signed-off-by: Kalle Pokki <kalle.pokki@eke.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-03 04:28:51 -08:00
Alexey Demin
6e01d1a4b2 EMAC driver: fix bug - invalidate data cache of new_skb->data range when cache is WB
It prevents overwritting new data from DMA.

Signed-off-by: Alexey Demin <bf53x@ya.ru>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-03 04:28:50 -08:00
Vitja Makarov
136492b275 EMAC driver: add power down mode
This patch puts phy in power-down mode when interface is down.
Also we should think about energy detect power-down mode, that will
decrease power consumption when no link.

Signed-off-by: Vitja Makarov <vitja.makarov@gmail.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-03 04:28:50 -08:00
Michael Hennerich
6893ff1c7e EMAC driver: ADSP-BF52x arch/mach support
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-03 04:28:49 -08:00
Mike Frysinger
2fb9d6f5a3 EMAC driver: use simpler comment headers and strip out information that is maintained in the scm's log
Signed-off-by: Mike Frysinger <michael.frysinger@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-03 04:28:48 -08:00
Aidan Williams
775919bc23 EMAC driver: bf537 MAC multicast hash filtering patch
The bf537 Ethernet MAC driver in the 2007R1.1-RC3 kernel (and the
current kernel) do not implement multicast hash filtering. This
is a performance problem if you have lots of multicast on your network.

This patch plugs the right bits into the multicast hash registers.

Signed-off-by: Aidan Williams <aidan@nicta.com.au>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-03 04:28:47 -08:00
Bryan Wu
7cc8f38188 EMAC driver: define MDC_CLK=2.5MHz and caculate mdc_div according to SCLK.
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-03 04:28:47 -08:00
Bryan Wu
6db9e4617e EMAC driver: shorten the mdelay value to solve netperf performance issue
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-03 04:28:46 -08:00
Jeff Garzik
8ee8e92254 [netdrvr] sis190: build fix
Fix PCI table section type conflict, by removing __devinitdata.

Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-03 04:28:45 -08:00
Stephen Hemminger
82637e8084 sky2: fix Wake On Lan interaction with BIOS
This patch disables config mode access after clearing PCI settings.
Some BIOS's seem to not do WOL if config bit still set.

Fixes: http://bugzilla.kernel.org/show_bug.cgi?id=9721

Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-03 04:28:44 -08:00
Stephen Hemminger
a7bffe722c sky2: restore multicast addresses after recovery
If the sky2 deadman timer forces a recovery, the multicast hash
list is lost. Move the call to sky2_set_multicast to the end
of sky2_up() so all paths that bring device up will restore multicast.

Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-03 04:28:44 -08:00
Jike Song
44911bfee4 pci-skeleton: Misc fixes to build neatly
The pci-skeleton.c has several problems with compilation, such as missing args
when calling synchronize_irq(). Fix it.

Signed-off-by: Jike Song <albcamus@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-03 04:28:43 -08:00
Johnson Leung
097c2aa89f phylib: Add Realtek 821x eth PHY support
this PHY present on the MPC8315E and MPC837xE RDB boards.

Signed-off-by: Johnson Leung <r58129@freescale.com>
Signed-off-by: Kevin Lam <r43770@freescale.com>
Signed-off-by: Joe D'Abbraccio <ljd015@freescale.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-03 04:28:42 -08:00
Mark Brown
6344f0521a natsemi: Update locking documentation
The documentation regarding synchronisation at the head of the natsemi
driver was badly bitrotted so replace it with a general statement about
the techniques used which is less likely to bitrot.

Also remove the note saying these chips are uncommon - it makes little
difference but they were used in a number of laptops and at least one mass
market PCI ethernet card.

Signed-off-by: Mark Brown <broonie@sirena.org.uk>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-03 04:28:42 -08:00
Nate Case
35b5f6b1a8 PHYLIB: Locking fixes for PHY I/O potentially sleeping
PHY read/write functions can potentially sleep (e.g., a PHY accessed
via I2C).  The following changes were made to account for this:

    * Change spin locks to mutex locks
    * Add a BUG_ON() to phy_read() phy_write() to warn against
      calling them from an interrupt context.
    * Use work queue for PHY state machine handling since
      it can potentially sleep
    * Change phydev lock from spinlock to mutex

Signed-off-by: Nate Case <ncase@xes-inc.com>
Acked-by: Andy Fleming <afleming@freescale.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-03 04:28:41 -08:00
Ayaz Abdulla
2b91213064 forcedeth: mac address mcp77/79
This patch is a critical fix for MCP77 and MCP79 devices. The feature
flags were missing the define for correct mac address
(DEV_HAS_CORRECT_MACADDR).

Signed-off-by: Ayaz Abdulla <aabdulla@nvidia.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-03 04:28:40 -08:00
Ayaz Abdulla
bb9a4fd1f7 forcedeth: multicast fix
This patch fixes the case where no multicast addresses are requested to
be added to the multicast filter. The multicast mask must be set to all
1's instead of all 0's.

Signed-off-by: Ayaz Abdulla <aabdulla@nvidia.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-03 04:28:40 -08:00
Ayaz Abdulla
32fa8b27ea forcedeth: tx pause fix
This patch fixes the tx pause enable watermark flags. The new values
where determined to be optimal during testing.

Signed-off-by: Ayaz Abdulla <aabdulla@nvidia.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-03 04:28:39 -08:00
Ayaz Abdulla
f648d12903 forcedeth: updated copyright section
This patch updates the copyright section to include 2007 and 2008.

Signed-off-by: Ayaz Abdulla <aabdulla@nvidia.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-03 04:28:38 -08:00
Ayaz Abdulla
bfaffe8fae forcedeth: checksum fix
The driver should inform the stack when checksum has been performed by
the HW when both IP and TCP (or UDP) checksum flags are indicated by HW.

Previously, it would also inform the stack when only IP checksum flag
was indicated by HW. This can cause data corruption when IP fragments
are used. The IP Identification field can wrap around and cause data
from new fragments to fill into older fragment slots with same IP Id.
The stack would then not perform TCP/UDP checksum (after re-assembly of
all fragments) since driver falsely stated it was already calculated.

Signed-off-by: Ayaz Abdulla <aabdulla@nvidia.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-03 04:28:37 -08:00
Ayaz Abdulla
0a62677b26 forcedeth: reset register fix
This patch fixes the reset register definition from 0x3C to 0x34.

Signed-off-by: Ayaz Abdulla <aabdulla@nvidia.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-03 04:28:37 -08:00
Roel Kluin
10a5a80b3c drivers/net/arm/at91_ether.c: logical/bitand typo in function reset_phy()
include/linux/mii.h:48:#define BMCR_RESET 0x8000

The function reset_phy() is in "#if 0" inactivated code

Replace logical "&&" by bit "&" before BMCR_RESET

Signed-off-by: Roel Kluin <12o3l@tiscali.nl>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-03 04:28:36 -08:00
Roland Dreier
7b9b09436b cxgb3: Remove incorrect __devinit annotations
When PCI error recovery was added to cxgb3, a function t3_io_slot_reset()
was added.  This function can call back into t3_prep_adapter() at any
time, so t3_prep_adapter() can no longer be marked __devinit.
This patch removes the __devinit annotation from t3_prep_adapter() and
all the functions that it calls, which fixes

    WARNING: drivers/net/cxgb3/built-in.o(.text+0x2427): Section mismatch in reference from the function t3_io_slot_reset() to the function .devinit.text:t3_prep_adapter()

Signed-off-by: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-03 04:28:35 -08:00
Jay Vosburgh
43cd2595e7 bonding: update version
Update bonding to version 3.2.4.

Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-03 04:28:34 -08:00
Jay Vosburgh
21c9d8d73d bonding: do not acquire rtnl in ARP monitor
The ARP monitor functions currently acquire RTNL when performing
failover operations, but do so incorrectly (out of order).  This causes
various warnings from might_sleep.

	The ARP monitor isn't supported for any of the bonding modes
that actually require RTNL, so it is safe to not hold RTNL when
failing over in the ARP monitor.

Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-03 04:28:33 -08:00
Andy Gospodarek
2439f9ebd4 bonding: fix race that causes invalid statistics
I've seen reports of invalid stats in /proc/net/dev for bonding
interfaces, and found it's a pretty easy problem to reproduce.  Since
the current code zeros the bonding stats when a read is requested and a
pointer to that data is returned to the caller we cannot guarantee that
the caller has completely accessed the data before a successive call to
request the stats zeroes the stats again.

This patch creates a new stack variable to keep track of the updated
stats and copies the data from that variable into the bonding stats
structure.  This ensures that the value for any of the bonding stats
should not incorrectly return zero for any of the bonding statistics.
This does use more stack space and require an extra memcpy, but it seems
like a fair trade-off for consistently correct bonding statistics.

Signed-off-by: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: Chris Snook <csnook@redhat.com>
Acked-by: Jay Vosburgh <fubar@us.ibm.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-03 04:28:13 -08:00
Jay Vosburgh
4fe4763cd8 bonding: fix NULL pointer deref in startup processing
Fix the "are we creating a duplicate" check to not compare
the name if the name is NULL (meaning that the system should select
a name).  Bug reported by Benny Amorsen <benny+usenet@amorsen.dk>.

Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-03 04:28:12 -08:00
Jay Vosburgh
80ee5ad231 bonding: fix set_multicast_list locking
This patch eliminates a problem (reported by lockdep) in the
bond_set_multicast_list function.  It first reduces the locking on
bond->lock to a simple read_lock, and second, adds netif_tx locking
around the bonding mc_list manipulations that occur outside of the
set_multicast_list function.

	The original problem was related to IPv6 addrconf activity.

Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-03 04:28:12 -08:00
Jay Vosburgh
a42e534f1b bonding: fix parameter parsing
My last fix (commit ece95f7fef)
didn't handle one case correctly.  This resolves that, and it will now
correctly parse parameters with arbitrary white space, and either text
names or mode values.

Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-03 04:28:11 -08:00
Ralf Baechle
c800c5c9db Fix/Rewrite of the mipsnet driver]
This is Thiemo's patch.

----- Forwarded message from Thiemo Seufer <ths@networkno.de> -----

From: Thiemo Seufer <ths@networkno.de>
Date: Sat, 17 Nov 2007 22:29:13 +0000
To: netdev@vger.kernel.org
Cc: linux-mips@linux-mips.org, ralf@linux-mips.org
Subject: [PATCH, REPOST] Fix/Rewrite of the mipsnet driver
Content-Type: text/plain; charset=us-ascii

Hello All,

currently the mipsnet driver fails after transmitting a number of
packages because SKBs are allocated but never freed. I fixed that
and coudn't refrain from removing the most egregious warts.

- mipsnet.h folded into mipsnet.c, as it doesn't provide any
  useful external interface.
- Free SKB after transmission.
- Call free_irq in mipsnet_close, to balance the request_irq in
  mipsnet_open.
- Removed duplicate read of rxDataCount.
- Some identifiers are now less verbose.
- Removed dead and/or unnecessarily complex code.
- Code formatting fixes.

Tested on Qemu's mipssim emulation, with this patch it can boot a
Debian NFSroot.

Thiemo

Signed-off-by: Thiemo Seufer <ths@networkno.de>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-03 04:28:10 -08:00
Auke Kok
6d490a7e5b igb: remove unneeded declaration shadowing earlier one
This removes a sparse warning.

Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-03 04:28:09 -08:00
Andy Gospodarek
9b71c5e070 e1000e: tweak irq allocation messages
There's too much noise on systems that don't support MSI.  Let's get rid
of a few and make the real error message more specific.

Signed-off-by: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-03 04:28:08 -08:00
Andreas Mohr
0a0863af0d e100: fix spelling errors
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-03 04:28:07 -08:00
Adrian Bunk
b4ea895dd8 e1000: make e1000_dump_eeprom() static
This patch makes the needlessly global e1000_dump_eeprom() static.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-03 04:28:07 -08:00
Adrian Bunk
5cfe33d66c e1000e: make a function static
This patch makes the needlessly global reg_pattern_test_array() static.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-03 04:27:56 -08:00
Jiri Slaby
915e91d734 Net: e100, fix iomap mem accesses
Patch against netdev-2.6 follows.
--
writeX functions are not permitted on iomap-ped space change to iowriteX,
also pci_unmap pci_map-ped space on exit (instead of iounmap).

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-03 04:27:55 -08:00
Olof Johansson
1145d954a5 pasemi_mac: Disable interface on close
Turns out we never disable the interface. It doesn't really cause
any problems since the channel is off, but it's still better to do it
this way.

Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-03 04:27:55 -08:00
Olof Johansson
ef1ea0b424 pasemi_mac: add support for setting MTU
Currently keeping it at 1500 bytes or below since jumbo frames need
special checksum offload on TX.

Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-03 04:27:54 -08:00
Olof Johansson
5cea73b0f7 pasemi_mac: Add support for changing mac address
Straightforward. It used to be hardcoded and impossible to override
with ifconfig.

Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-03 04:27:53 -08:00
Surjit Reang
c88559539b S2io: Fix for LRO Bugs
Resubmitting patch from Al Viro <viro@zeniv.linux.org.uk>, with subject -
[PATCH] s2io LRO bugs.
a) initiate_new_session() sets ->tcp_ack to ntohl(...); everything
   else stores and expects to find there the net-endian value.
b) check for monotonic timestamps in verify_l3_l4_lro_capable()
   compares the value sitting in TCP option (right there in the skb->data,
   net-endian 32bit) with the value picked from earlier packet.
   Doing that without ntohl() is an interesting idea and it might even
   work occasionally; unfortunately, it's quite broken.

Signed-off-by: Surjit Reang <surjit.reang@neterion.com>
Signed-off-by: Ramkrishna Vepa <ram.vepa@neterion.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-03 04:27:38 -08:00
Nate Case
03157ac31e PHYLIB: Add BCM5482 PHY support
This Broadcom PHY is similar to other bcm54xx devices.

Signed-off-by: Nate Case <ncase@xes-inc.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-03 04:26:28 -08:00
Mitch Williams
efb90e43ff e1000e: add new wakeup cababilities
Ethtool supports wake-on-ARP and wake-on-link, and so does the hardware
supported by e1000e.  This patch just introduces the two.

Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-03 04:26:27 -08:00
Al Viro
4a51c0d02c big-endian support for via-velocity
* kill bitfields
* annotate
* add missing conversions
* fix a couple of brainos in zerocopy stuff (fortunately, it's ifdef'ed out)

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-03 04:26:27 -08:00
Lennert Buytenhek
ad84243eb4 rtl8150: use default MTU of 1500
The RTL8150 driver uses an MTU of 1540 by default, which causes a
bunch of problems -- it prevents booting from NFS root, for one.

Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Cc: Petko Manolov <petkan@nucleusys.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-03 04:26:15 -08:00
Adrian Bunk
83084fa392 net/sunbmac.c section fix
This patch fixes the following section mismatch:

<--  snip  -->

...
WARNING: drivers/net/sunbmac.o(.devinit.text+0x24): Section mismatch in reference from the function bigmac_sbus_probe() to the function .init.text:bigmac_ether_init()
...

<--  snip  -->

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-03 04:26:15 -08:00
Adrian Bunk
3edd76caf4 net/sunqe.c section fix
This patch fixes the following section mismatch:

<--  snip  -->

...
WARNING: drivers/net/sunqe.o(.devinit.text+0x4): Section mismatch in reference from the function qec_sbus_probe() to the function .init.text:qec_ether_init()
...

<--  snip  -->

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-03 04:26:14 -08:00
Adrian Bunk
aa782d3195 drivers/net/sunvnet.c:print_version() must be __devinit
This patch fixes the following section mismatches:

<--  snip  -->

...
WARNING: drivers/net/sunvnet.o(.text+0x220): Section mismatch in reference from the function print_version() to the variable .devinit.data:version
WARNING: drivers/net/sunvnet.o(.text+0x228): Section mismatch in reference from the function print_version() to the variable .devinit.data:version
...

<--  snip  -->

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-03 04:26:13 -08:00
Adrian Bunk
e6353f3043 IBMLANA no longer has to depend on MCA_LEGACY
This patch removes the no longer required dependency of IBMLANA
on MCA_LEGACY.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-03 04:26:13 -08:00
Adrian Bunk
b54e4f8346 ibmlana_init_one() must be __devinit
This patch fixes the following section mismatch:

<--  snip  -->

...
WARNING: drivers/net/built-in.o(.text+0x1148a5): Section mismatch in reference from the function ibmlana_init_one() to the variable .init.data:ibmlana_adapter_names
...

<--  snip  -->

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-03 04:26:12 -08:00
Adrian Bunk
de11743e23 olympic_open() must be __devinit
This patch fixes the following section mismatch:

<--  snip  -->

...
WARNING: drivers/net/built-in.o(.text+0x155573): Section mismatch in reference from the function olympic_open() to the function .devinit.text:olympic_init()
...

<--  snip  -->

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-03 04:26:11 -08:00
Adrian Bunk
976006f10b ibmlana_adapter_names[] must be __devinitdata
This patch fixes the following section mismatch:

<--  snip  -->

...
WARNING: drivers/net/built-in.o(.devinit.text+0x1baa4): Section mismatch in reference from the function ibmlana_init_one() to the variable .init.data:ibmlana_adapter_names
...

<--  snip  -->

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-03 04:26:10 -08:00
Adrian Bunk
de4e7c8899 via-rhine.c:rhine_hw_init() must be __devinit
Thie patch fixes the following section mismatch:

<--  snip  -->

...
WARNING: drivers/net/built-in.o(.text+0xdd840): Section mismatch in reference from the function rhine_hw_init() to the function .devinit.text:rhine_reload_eeprom()
...

<--  snip  -->

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-03 04:26:10 -08:00
Ben Dooks
237c5e8ee2 NET: AX88796 use dev_dbg() instead of printk()
Change to using dev_dbg() and the other dev_xxx()
macros instead of printk, and update to use the
print_mac() helper.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-03 04:26:09 -08:00
Haavard Skinnemoen
06c3fd6ad5 macb: Fix section mismatch and shrink runtime footprint
macb devices are only found integrated on SoCs, so they can't be
hotplugged. Thus, the probe() and exit() functions can be __init and
__exit, respectively. By using platform_driver_probe() instead of
platform_driver_register(), there won't be any references to the
discarded probe() function after the driver has loaded.

This also fixes a section mismatch due to macb_probe(), defined as
__devinit, calling macb_get_hwaddr, defined as __init.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-03 04:26:00 -08:00
Jan-Bernd Themann
e87ceea13e ehea: fix sysfs link compile problem
Due to changes in the struct device_driver there is no direct
access to its kobj any longer. The kobj was used to create
sysfs links between eHEA ethernet devices and the driver.
This patch removes the affected sysfs links to resolve
the build problems.

Signed-off-by: Jan-Bernd Themann <themann@de.ibm.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-03 04:26:00 -08:00
Anton Vorontsov
26d29ea799 ucc_geth: add support for netpoll
This patch adds netpoll support for the QE UCC Gigabit Ethernet
driver. Tested using netconsole and KGDBoE.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-03 04:25:59 -08:00
Anton Vorontsov
80a9fad8e8 ucc_geth: fix module removal
- uccf should be set to NULL to not double-free memory on
  subsequent calls;
- ind_hash_q and group_hash_q lists should be initialized in the
  probe() function, instead of struct_init() (called by open()),
  otherwise there will be an oops if ucc_geth_driver removed
  prior 'ifconfig ethX up';
- add unregister_netdev();
- reorder geth_remove() steps.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-03 04:25:58 -08:00
Doug Maxey
f67c627518 ehea: fix qmr checkpatch complaints
Cc: Jan-Bernd Themann <themann@de.ibm.com>
Signed-off-by: Doug Maxey <dwm@austin.ibm.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-03 04:25:58 -08:00
Doug Maxey
e076c872df ehea: fix phyp checkpatch complaints
Cc: Jan-Bernd Themann <themann@de.ibm.com>
Signed-off-by: Doug Maxey <dwm@austin.ibm.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-03 04:25:57 -08:00
Doug Maxey
508d2b5d26 ehea: fix main checkpatch complaints
Cc: Jan-Bernd Themann <themann@de.ibm.com>
Signed-off-by: Doug Maxey <dwm@austin.ibm.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-03 04:25:56 -08:00
Doug Maxey
13da93d495 ehea: fix ethtool checkpatch complaints
Cc: Jan-Bernd Themann <themann@de.ibm.com>
Signed-off-by: Doug Maxey <dwm@austin.ibm.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-03 04:25:56 -08:00
Doug Maxey
c6fa0b03cd ehea: fix ehea.h checkpatch complaints
Cc: Jan-Bernd Themann <themann@de.ibm.com>
Signed-off-by: Doug Maxey <dwm@austin.ibm.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-03 04:25:55 -08:00
John W. Linville
04a9e451fd ath5k: fix section mismatch warning
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-01 16:15:50 -05:00
Reinette Chatre
e903fbd41e iwlwifi: fix merge sequence: exit on error before state change
The intention behind the original patch:
"iwlwifi: fix possible read attempt on ucode that is not available"
was to exit before any state is changed. Due to its submission directly
to 2.6.24 it was not clear how this relates to the latest iwlwifi work.

This patch does exactly the same as the previous patch, just earlier to
prevent any state from being changed if there is an error.

Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-01 16:14:21 -05:00
Tomas Winkler
ff5059eff2 iwlwifi: remove ieee80211 types from iwl-helpers.h
This patch removes IEEE80211_STYPE_BACK_REQ and
IEEE80211_STYPE_BACK defines from iwl-helpers.h. These are already
defined in include/linux/ieee80211.h

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-01 16:13:43 -05:00
Tomas Winkler
e53cfe0ead iwlwifi: Fix MIMO PS mode
This patch setups correctly MIMO PS mode flags

Signed-off-by: Guy Cohen <guy.cohen@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-01 16:13:16 -05:00
Ron Rindjunsky
bd8a040e24 iwlwifi: fix sparse warning in iwl 3945
This patch fixes a sparse warning over iwl3945_add_radiotap function by
turning it static

Signed-off-by: Ron Rindjunsky <ron.rindjunsky@intel.com>
Acked-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-01 16:13:05 -05:00
Linus Torvalds
cec03afcb6 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (173 commits)
  [NETNS]: Lookup in FIB semantic hashes taking into account the namespace.
  [NETNS]: Add a namespace mark to fib_info.
  [IPV4]: fib_sync_down rework.
  [NETNS]: Process interface address manipulation routines in the namespace.
  [IPV4]: Small style cleanup of the error path in rtm_to_ifaddr.
  [IPV4]: Fix memory leak on error path during FIB initialization.
  [NETFILTER]: Ipv6-related xt_hashlimit compilation fix.
  [NET_SCHED]: Add flow classifier
  [NET_SCHED]: sch_sfq: make internal queues visible as classes
  [NET_SCHED]: sch_sfq: add support for external classifiers
  [NET_SCHED]: Constify struct tcf_ext_map
  [BLUETOOTH]: Fix bugs in previous conn add/del workqueue changes.
  [TCP]: Unexport sysctl_tcp_tso_win_divisor
  [IPV4]: Make struct ipv4_devconf static.
  [TR] net/802/tr.c: sysctl_tr_rif_timeout static
  [XFRM]: Fix statistics.
  [XFRM]: Remove unused exports.
  [PKT_SCHED] sch_teql.c: Duplicate IFF_BROADCAST in FMASK, remove 2nd.
  [BNX2]: Fix ASYM PAUSE advertisement for remote PHY.
  [IPV4] route cache: Introduce rt_genid for smooth cache invalidation
  ...
2008-02-01 21:06:29 +11:00
Al Viro
9c52fab2f1 Fix dl2k constants
The MSSR constants didn't match the reality - bitfield declarations used
to be correct (1000BT_FD - bit 11, 1000BT_HD - bit 10), but enum had
them the other way round.  Went unnoticed until the switch from the
bitfields use to the explicit arithmetics and I hadn't caught that one
when verifying correctness of change...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-01 20:54:03 +11:00
Michael Chan
c26736ec17 [BNX2]: Fix ASYM PAUSE advertisement for remote PHY.
We were checking for the ASYM_PAUSE bit for 1000Base-X twice instead
checking for both the 1000Base-X bit and the 10/100/1000Base-T bit.
The purpose of the logic is to tell the firmware that ASYM_PAUSE is
set on either the Serdes or Copper interface.

Problem was discovered by Roel Kluin <12o3l@tiscali.nl>

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-31 19:28:28 -08:00
Rami Rosen
52913246e0 [MACVLAN]: Setting macvlan_handle_frame_hook to NULL when rtnl_link_register() fails.
In drivers/net/macvlan.c, when rtnl_link_register() fails in
macvlan_init_module(), there is no point to set it (second time in
this method) to macvlan_handle_frame; macvlan_init_module() will
return a negative number, so instead this patch sets
macvlan_handle_frame_hook to NULL.

Signed-off-by: Rami Rosen <ramirose@gmail.com>
Acked-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-31 19:28:25 -08:00
Michael Chan
18c0226e3c [BNX2]: Update version to 1.7.3.
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-31 19:27:17 -08:00
Michael Chan
df7f1ed6b8 [BNX2]: Update firmware.
Update firmware to support programmable flow control.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-31 19:27:17 -08:00
Michael Chan
83e3fc89bb [BNX2]: Fine-tune flow control on 5709.
Make use of the programmable high/low water marks in 5709 for
802.3 flow control.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-31 19:27:16 -08:00
Michael Chan
62a8313cdd [BNX2]: Remove CTX_WR macro.
The CTX_WR macro is unnecessary and obfuscates the code.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-31 19:27:15 -08:00
Michael Chan
2726d6e126 [BNX2]: Remove REG_WR_IND/REG_RD_IND macros.
The REG_WR_IND/REG_RD_IND macros are unnecessary and obfuscate the
code.  Many callers to these macros read and write shared memory from
the bp->shmem_base, so we add 2 similar functions that automatically
add the shared memory base.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-31 19:27:14 -08:00
Michael Chan
6f743ca052 [BNX2]: Refine tx coalescing setup.
Make the tx coalescing setup code independent of the MSIX vector.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-31 19:27:13 -08:00
Michael Chan
f3014c0cb6 [BNX2]: Fix 5706 serdes link down bug.
1. Correct the MII expansion serdes control register definition.
2. Check an additional RUDI_INVALID bit when determining 5706S link.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-31 19:27:12 -08:00
Jussi Kivilinna
bf164cc054 Add new driver 'rndis_wlan' for wireless RNDIS devices.
New driver for wireless RNDIS devices. So far only known chip that uses
wireless RNDIS is Broadcom 4320. Driver detects all RNDIS devices that
have RNDIS wireless physical medium. At least following devices are
detected:

  Buffalo WLI-U2-KG125S
  U.S. Robotics USR5421
  Belkin F5D7051
  Linksys WUSB54GSv2
  Linksys WUSB54GSC
  Asus WL169gE
  Eminent EM4045
  BT Voyager 1055
  Linksys WUSB54GSv1
  U.S. Robotics USR5420
  BUFFALO WLI-USB-G54

Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-31 19:27:01 -08:00
Jussi Kivilinna
3692e94f15 Move usbnet.h and rndis_host.h to include/linux/usb
Move headers usbnet.h and rndis_host.h to include/linux/usb and fix includes
for drivers/net/usb modules. Headers are moved because rndis_wlan will be
outside drivers/net/usb in drivers/net/wireless and yet need these headers.

Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-31 19:27:00 -08:00
Jussi Kivilinna
039ee17d1b rndis_host: Add RNDIS physical medium checking into generic_rndis_bind()
Add RNDIS physical medium checking into generic_rndis_bind() and also make
rndis_host to be only bind on every medium except wireless.

Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-31 19:26:59 -08:00
Jussi Kivilinna
5d6ecf6c5d rndis_host: Add link_change function pointer to 'struct rndis_data'.
Callback to signal link state changes from minidriver to
'subminidrivers'.

Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-31 19:26:59 -08:00
Jussi Kivilinna
7c39e038fc rndis_host: Add early_init function pointer to 'struct rndis_data'.
Function pointer is for 'subminidrivers' that need to do work on device
right after minidriver has initialized hardware.

For example, rndis_wlan setting device specific configuration parameters
with OID_GEN_RNDIS_CONFIG_PARAMETER right after rndis_host has
initialized hardware with RNDIS_INIT.

Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-31 19:26:58 -08:00
Jussi Kivilinna
476842b196 usbnet: add driver_priv pointer to 'struct usbnet'
Add a private data pointer to usbnet for rndis_wlan module to use.

Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-31 19:26:57 -08:00
Jussi Kivilinna
5665998cd7 rndis_host: export functions
Export rndis_host functions and also rename rndis_bind() to
generic_rndis_bind() for modules using rndis_host as base.

Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-31 19:26:57 -08:00
Jussi Kivilinna
7517579af8 rndis_host: Split up rndis_host.c
Split up rndis_host.c into rndis_host.h and rndis_base.c. This is done so
that rndis_wlan can reuse common parts with rndis_host.

Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-31 19:26:56 -08:00
Jussi Kivilinna
6e3bbcc5d7 usbnet: Use wlan device name for RNDIS wireless devices
Use wlan device name for RNDIS wireless devices.

Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
Signed-off-by: Bjorge Dijkstra <bjd@jooz.net>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-31 19:26:55 -08:00
Jussi Kivilinna
a842edaca3 rndis_host: Fix rndis packet filter flags.
RNDIS packet filter flags are not exactly the same as CDC flags
so we cannot reuse them.

Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
Signed-off-by: Bjorge Dijkstra <bjd@jooz.net>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-31 19:26:55 -08:00
Jussi Kivilinna
9ff55874fe rndis_host: Halt device if rndis_bind fails.
When bind fails after device was initialized, shutdown device properly
by sending RNDIS_MSG_HALT.

Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
Signed-off-by: Bjorge Dijkstra <bjd@jooz.net>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-31 19:26:54 -08:00
Jussi Kivilinna
04c3c01a21 rndis_host: Use 1KB buffer in rndis_unbind
rndis_command requires the caller to pass in a buffer of at least 1KB.

Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
Signed-off-by: Bjorge Dijkstra <bjd@jooz.net>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-31 19:26:53 -08:00
Bjorge Dijkstra
786e3dfbae cdc_ether: Hardwire CDC descriptors when missing
Just as ActiveSync devices, some regular RNDIS devices also lack
the CDC descriptors (e.g. devices based on BCM4320 WLAN chip).
This patch hardwires the CDC descriptors for all RNDIS style devices
when they are missing.

Signed-off-by: Bjorge Dijkstra <bjd@jooz.net>
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-31 19:26:52 -08:00
Bjorge Dijkstra
2bfa2e1fec rndis_host: Fix sparse warning
rndis_unbind and usbnet_cdc_unbind don't return anything.

Signed-off-by: Bjorge Dijkstra <bjd@jooz.net>
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-31 19:26:52 -08:00
Marcin Juszkiewicz
5d635ead20 Add another Prism2 card to hostap
Card reported by Ångström user:
http://bugs.openembedded.net/show_bug.cgi?id=3236

Socket 1:
   product info: "Wireless LAN", "11Mbps PC Card", "Version 01.02", ""
   manfid: 0x0156, 0x0002
   function: 6 (network)

Signed-off-by: Marcin Juszkiewicz <openembedded@haerwu.biz>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-31 19:26:51 -08:00
Michal Piotrowski
709365af80 hostap_80211.h: remove duplicate prototype
There were two identical prototypes for hostap_80211_rx() in
drivers/net/wireless/hostap/hostap_80211.h.

This patch fixes kernel Bugzilla #8930.

Reported by Christoph Burger-Scheidlin.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-31 19:26:50 -08:00
Cyrill Gorcunov
18904f5839 wireless: iwlwifi3945/4965 - fix incorrect counting of memory
This patch does fix incorrect counting of memory allocated by kmalloc.
It seems that could lead to allocated memory overrun and corrupt
nearlaid memory area.

Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
Acked-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-31 19:26:49 -08:00
Holger Schurig
fdfb92eab5 libertas: fix interrupt while removing driver
Previously I've got an interrupt while removing the driver.

Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Acked-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-31 19:26:49 -08:00
Ihar Hrachyshka
5a6e04345a libertas: fix memory alignment problems on the blackfin
Fixing unaligned memory access on the blackfin architecture (maybe on the
ARM also).

Signed-off-by: Ihar Hrachyshka <ihar.hrachyshka@promwad.com>
Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Acked-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-31 19:26:48 -08:00
Eric Sandeen
9e7d1a445e iwlwifi: correct math in elapsed_jiffies
w/o the first change: if end == start you get MAX_JIFFY_OFFSET which
isn't what you want...

For the latter I think to be technically correct you need the +1 to
account for the jiffy between MAX_JIFFY_OFFSET and 0

(hmm w/ the 2nd change the first isn't strictly needed... ah well)

Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-31 19:26:47 -08:00
Michael Buesch
09552ccd82 b43: Drop packets that we are not able to encrypt
We must not transmit packets we're not able to encrypt.

This fixes a bug where in a tiny timeframe after machine resume
packets can get sent unencrypted and might leak information.

This also fixes three small resource leakages I spotted while fixing
the security problem. Properly deallocate the DMA slots in any DMA
allocation error path.

Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-31 19:26:45 -08:00
Michael Buesch
7be1bb6b79 b43: Fix suspend/resume
This fixes suspend/resume.

We must not overwrite the MAC addresses on resume. Otherwise
the card won't ACK any packets anymore.

Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-31 19:26:45 -08:00
Gregory Greenman
76f3915b4c iwlwifi: Fix uCode error on association
The problem is that priv->assoc_id is set when assoc. resp frame is
received. But, when it is set, LQ cmd is still not sent to the uCode, it is
done from bg_post_assoc, which is called through a workqueue.

On the other hand, when a tx arrives at the moment when this flag is set,
but LQ is still not sent, the if condition in tx_skb will not hold and
the frame will not be dropped.  Thus, it will be sent through
which is still not in the sta table in the uCoded.

Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-31 19:26:44 -08:00
Joonwoo Park
25c03d8e8c iwlwifi: do not schedule tasklet when rcv unused irq
The nic controller's scheduler interrupt (CSR_INT_BIT_SCD) indicates
to the driver that scheduler finished to transmit the frame/frames.
This bit is not used and the tasklet should thus not be scheduled upon
its receipt.

Signed-off-by: Joonwoo Park <joonwpark81@gmail.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-31 19:26:43 -08:00
Reinette Chatre
74a3a2509d iwlwifi: cleanup usage of inline functions
Be consistent when using inline functions. If the function only used
once we move it to where it is used - no need for externs.

Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-31 19:26:42 -08:00
Reinette Chatre
849e0dcea6 iwlwifi: initialize geo/channel information during probe
The geo/channel information is obtained from the EEPROM, which is read
during probe. We can thus set up channel information at this time. This
helps us to support ioctl commands that rely on this before the interface
is brought up.

Clearly matches _init_channel_map with _free_channel_map and _init_geos
with _free_geos to ensure functions calling these routines can also call
their cleanup routines.

Fixes a few bugs:
- if channel information is not available when ioctl commands are
  issued then we get a NULL pointer oops. Having channel information
  set up during probe we can deal with ioctl commands without requiring
  interface to be brought up.
  This fixes bug: http://www.bughost.org/bugzilla/show_bug.cgi?id=1552
- Fix potential problem if user triggers probe/remove/probe sequence. The
  value of priv->channel_count was used to determine if channel map is
  set up. This value was never reset when channel map was removed.
- Fix memory leak: priv->modes need to be freed when device removed.

Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-31 19:26:41 -08:00
Reinette Chatre
75849d287c iwl4965: fix return code indicating one interface is supported
This is a fix to patch "iwlwifi: fix iwl_mac_add_interface handler".
In that patch the return code was corrected for iwl3945, but not for
iwl4965.

Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Cc: Tomas Carnecky <tom@dbservice.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-31 19:26:40 -08:00
Maarten Lankhorst
d986bcd1ca iwlwifi: Fix an invalid bitmask test in iwl3945 and iwl4965
Signed-off-by: Maarten Lankhorst <m.b.lankhorst@gmail.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-31 19:26:39 -08:00
Adrian Bassett
4fcc54707e rtl8180_dev.c: add support for 1799:700f
I have been using the rtl8180 driver via the git kernel route for a while now and would like to suggest that the following local ammendment is included in the development tree in order to support the PCI device 1799:700f.

This device is found on the 'Belkin Wireless G Desktop Card' product, model 'F5D7000uk'.  From memory, the chip on the card is inscribed RTL8185L;  (I don't know the significance of the 'L', I'm afraid).

Signed-off-by: Adrian Bassett <adrian.bassett@hotmail.co.uk>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-31 19:26:39 -08:00
Stefano Brivio
e78c9d2857 b43legacy: fix MAC control and microcode init
This zeros out all microcode related memory before loading
the microcode.

This also fixes initialization of the MAC control register.
The _only_ place where we overwrite the contents of the MAC control
register is at the beginning of b43_chip_init().
All other places must do read() -> mask/set -> write() to not
overwrite existing bits.

This also adds a longer delay for waiting for the microcode
to initialize itself. It seems that the current timeout is sufficient
on all available devices, but there's no real reason why we shouldn't
wait for up to one second. Slow embedded devices might exist.
Better safe than sorry.

While at it, fix naming of MACCTL values.

This patch by Michael Buesch has been ported to b43legacy.

Signed-off-by: Stefano Brivio <stefano.brivio@polimi.it>
Acked-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-31 19:26:37 -08:00
Michael Buesch
8712f2769d b43legacy: Fix rfkill allocation leakage in error paths
We must kill rfkill in any error paths that trigger after rfkill init.

Signed-off-by: Michael Buesch <mb@bu3sch.de>
Acked-by: Stefano Brivio <stefano.brivio@polimi.it>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-31 19:26:36 -08:00
Michael Buesch
1946a2c3c6 b43: Fix rfkill allocation leakage in error paths
We must kill rfkill in any error paths that trigger after rfkill init.

Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-31 19:26:35 -08:00
Bruno Randolf
be9b72590c ath5k: debug level improvements
* use only one debug level for beacon debugging: unify ATH5K_DEBUG_BEACON and
ATH5K_DEBUG_BEACON_PROC.

* remove debug level ATH5K_DEBUG_FATAL. doesn't make sense as a debug level -
if it's fatal it should be logged as an error.

* fancier printing of debug levels. cat /debugfs/ath5k/phy0/debug.

* allow debug levels to be changed by echoing their name into
/debugfs/ath5k/phy0/debug. this will toggle the state, when it was off it will
be turned on and vice versa.

* use copy_from_user() when reading from the debug files. use unsigned int for
better optimization. reduce buffer sizes on stack.

drivers/net/wireless/ath5k/base.c:      Changes-licensed-under: 3-Clause-BSD
drivers/net/wireless/ath5k/debug.c:     Changes-licensed-under: GPL
drivers/net/wireless/ath5k/debug.h:     Changes-licensed-under: GPL

Signed-off-by: Bruno Randolf <bruno@thinktube.com>
Acked-by: Luis R. Rodriguez <mcgrof@winlab.rutgers.edu>
Acked-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-31 19:26:35 -08:00
John W. Linville
4bdb0fba9e rt61pci: fix-up merge damage
A subtle merge error was introduced after re-queueing a patch for 2.6.24
instead of 2.6.25...

Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-31 19:26:33 -08:00
Paul Mackerras
bd45ac0c5d Merge branch 'linux-2.6' 2008-01-31 11:25:51 +11:00
Paul Mackerras
4eece4ccf9 Merge branch 'for-2.6.25' of git://git.secretlab.ca/git/linux-2.6-mpc52xx 2008-01-31 10:50:17 +11:00
Linus Torvalds
60e233172e [net] Gracefully handle shared e1000/1000e driver PCI ID's
Both the old e1000 driver and the new e1000e driver can drive some
PCI-Express e1000 cards, and we should avoid ambiguity about which
driver will pick up the support for those cards when both drivers are
enabled.

This solves the problem by having the old driver support those cards if
the new driver isn't configured, but otherwise ceding support for PCI
Express versions of the e1000 chipset to the newer driver.  Thus
allowing both legacy configurations where only the old driver is active
(and handles all chips it knows about) and the new configuration with
the new driver handling the more modern PCIE variants.

Acked-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-31 00:30:15 +11:00
Linus Torvalds
5b10ca19ea Mostly revert "e1000/e1000e: Move PCI-Express device IDs over to e1000e"
The new e1000e driver is apparently not yet suitable for general use, so
mark it experimental, and re-instate all the PCI-Express device IDs in
the old and stable e1000 driver so that people (namely me) can continue
to use a driver that actually works.

Auke & co have been appraised of the situation.

Cc: Auke Kok <auke-jan.h.kok@intel.com>
Cc: Jeff Garzik <jeff@garzik.org>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-30 09:54:54 +11:00
Stephen Hemminger
3c582b30bc [PPP]: Sparse warning fixes.
Fix a bunch of warnings in PPP and related drivers. Mostly because
sparse doesn't like it when the the function is only marked private in
the forward declaration.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28 15:11:27 -08:00
Denis V. Lunev
f206351a50 [NETNS]: Add namespace parameter to ip_route_output_key.
Needed to propagate it down to the ip_route_output_flow.

Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28 15:11:07 -08:00
Bruno Randolf
c0e1899bdb ath5k: always extend rx timestamp with tsf
always extend the rx timestamp with the local TSF, since this information is
also needed for proper IBSS merging. this is done in the tasklet for now, maybe
has to be moved to the interrupt handler like in madwifi.

drivers/net/wireless/ath5k/base.c:      Changes-licensed-under: 3-Clause-BSD

Signed-off-by: Bruno Randolf <bruno@thinktube.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:10:54 -08:00
Bruno Randolf
6d91e1d808 ath5k: configure backoff for IBSS beacon queue
in "11.1.2.2 Beacon generation in an IBSS" the IEEE802.11 standard says, each
STA should... "b) Calculate a random delay uniformly distributed in the range
between zero and twice aCWmin × aSlotTime,".

configure cwmin and cwmax of the beacon queue in IBSS mode according to this.
unfortunately beacon backoff does not work reliably yet, so i suspect we have a
problem somewhere else, since the same settings (and similar beacon timer
configuration) work for madwifi.

drivers/net/wireless/ath5k/base.c:      Changes-licensed-under: 3-Clause-BSD

Signed-off-by: Bruno Randolf <bruno@thinktube.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:10:53 -08:00
Bruno Randolf
036cd1ec03 ath5k: use SWBA to detect IBSS HW merges
use SWBA (software beacon alert) interrupts to keep track of the next beacon
time und check if a HW merge (automatic TSF update) has happened on every
received beacon with the same BSSID.

this is necessary because the atheros hardware will silently update the local
TSF in IBSS mode, but not its beacon timers. if the TSF is ahead of the beacon
timers no beacons are sent until the timers wrap around (typically after about
1 minute).

this solution is not very nice, since we have to look into every beacon, but
there is apparently no other way to detect HW merges.

drivers/net/wireless/ath5k/base.c:      Changes-licensed-under: 3-Clause-BSD
drivers/net/wireless/ath5k/base.h:      Changes-licensed-under: 3-Clause-BSD

Signed-off-by: Bruno Randolf <bruno@thinktube.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:10:52 -08:00
Bruno Randolf
9804b98d57 ath5k: better beacon timer calculation
update ath5k_beacon_update_timers() for better beacon timer calculation in a
variety of situations. most important is the possibility to call it with the
timestamp of a received beacon, when we detected that a HW merge has happened
and we need to reconfigure the beacon timers based on that.

we call this from the mac80211 callback reset_tsf now instead of beacon_update,
and there will be more use of it in the next patch.

drivers/net/wireless/ath5k/base.c:      Changes-licensed-under: 3-Clause-BSD

Signed-off-by: Bruno Randolf <bruno@thinktube.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:10:51 -08:00
Bruno Randolf
e535c1ac7e ath5k: beacon interval is in TU
the beacon interval is passed by mac80211 in TU already, so we can directly use
it without conversion. also update the comments about TU (1 TU is defined by
802.11 as 1024usec).

drivers/net/wireless/ath5k/ath5k.h:     Changes-licensed-under: ISC
drivers/net/wireless/ath5k/base.c:      Changes-licensed-under: 3-Clause-BSD
drivers/net/wireless/ath5k/base.h:      Changes-licensed-under: 3-Clause-BSD

Signed-off-by: Bruno Randolf <bruno@thinktube.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:10:50 -08:00
Bruno Randolf
1008e0f7b9 ath5k: use 3 instead of 0x00000003
reviewed beacon timer initialization with register traces from madwifi: what we
are doing is correct :). one minor fix: use 3 instead of 0x00000003 - it's more
readable.

drivers/net/wireless/ath5k/hw.c:        Changes-licensed-under: ISC

Signed-off-by: Bruno Randolf <bruno@thinktube.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:10:50 -08:00
Michael Buesch
1f7d87b0ec b43: Fix MAC control and microcode init
This zeros out all microcode related memory before loading
the microcode.

This also fixes initialization of the MAC control register.
The _only_ place where we overwrite the contents of the MAC control
register is at the beginning of b43_chip_init().
All other places must do read() -> mask/set -> write() to not
overwrite existing bits.

This also adds a longer delay for waiting for the microcode
to initialize itself. It seems that the current timeout is sufficient
on all available devices, but there's no real reason why we shouldn't
wait for up to one second. Slow embedded devices might exist.
Better safe than sorry.

Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:10:49 -08:00
John W. Linville
247ae44920 ath5k: reset key cache after resume
Otherwise it may be impossible to connected to an open network after a
resume.

This is a modified version of an original patch by
Alex Eskin <alexeskin@yahoo.com>:

	https://bugzilla.redhat.com/show_bug.cgi?id=425950#c8

Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:10:48 -08:00
John W. Linville
c65638a72c ath5k: use AR5K_KEYTABLE_SIZE when initializing key table
...instead of using AR5K_KEYCACHE_SIZE, which would seem to be a
typo/thinko...

Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:10:47 -08:00
Michael Buesch
61cb5dd6d1 b43: Fix firmware caching
We must also store the ID string (filename) for the cached firmware blobs
and verify that we really have the right firmware cached before using it.
If we don't have the right fw cached, we must free it and request the
correct blobs.

This fixes bandswitch on A/B/G multi-PHY devices.

Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:10:46 -08:00
Michael Buesch
95b66bad55 b43: Add more N-PHY init code
This also adds lots of TODOs. Oh well. Lots of work. :)

Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:10:44 -08:00
Michael Buesch
bfe6a50156 b43legacy: Remove the PHY spinlock
This fixes a sparse warning about weird locking.
The spinlock is not needed, so simply remove it.
This also adds some sanity checks to the PHY and radio locking
to protect against recursive locking.

Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:10:42 -08:00
Auke Kok
9d5c824399 igb: PCI-Express 82575 Gigabit Ethernet driver
We are pleased to announce a new Gigabit Ethernet product and its
driver to the linux community. This product is the Intel(R) 82575
Gigabit Ethernet adapter family. Physical adapters will be available
to the public soon. These adapters come in 2- and 4-port versions
(copper PHY) currently. Other variants will be available later.

The 82575 chipset supports significantly different features that
warrant a new driver. The descriptor format is (just like the
ixgbe driver) different. The device can use multiple MSI-X vectors
and multiple queues for both send and receive. This allows us to
optimize some of the driver code specifically as well compared to
the e1000-supported devices.

This version of the igb driver no lnger uses fake netdevices and
incorporates napi_struct members for each ring to do the multi-
queue polling. multi-queue is enabled by default and the driver
supports NAPI mode only.

All the namespace collisions should be gone in this version too. The
register macro's have been condensed to improve readability.

Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28 15:10:33 -08:00
Al Viro
b491edd581 bnx2 annotations
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-28 15:10:32 -08:00
Al Viro
f305f789bb annotate netxen
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-28 15:10:31 -08:00
Al Viro
66341fffd4 annotate myri10ge
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-28 15:10:31 -08:00
Al Viro
05e5c11653 annotate cxgb3
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-28 15:10:30 -08:00
Al Viro
ac390c60a8 annotate chelsio
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-28 15:10:29 -08:00
Michael Chan
583c28e564 [BNX2]: Fix driver phy_flags name space.
Prefix "bp->phy_flags" names with BNX2_PHY_FLAG_* for consistency.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28 15:10:23 -08:00
David S. Miller
f86e82fb54 [BNX2]: Fix driver software flag namespace.
Prefix "bnx2->flags" names with BNX2_* for consistency.

Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28 15:10:16 -08:00
Michael Chan
feebb33183 [BNX2] Update version to 1.7.2.
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28 15:10:16 -08:00
Michael Chan
b2fadeae13 [BNX2]: Add link-down workaround on 5706 serdes.
In some blade systems using the 5706 serdes, the hardware sometimes
does not properly generate link down interrupts.  We add a workaround
in the driver's timer to force a link-down when some PHY registers
report loss of SYNC.

The parallel detect logic is cleaned up slightly to better integrate
the workaround.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28 15:10:15 -08:00
Michael Chan
1097f5e921 [BNX2]: Fix minor bug in bnx2_has_work().
It is more correct to get the status block from the bnx2_napi struct
instead of the bnx2 struct.  It happens that they are the same in this
case because we are using the first MSIX vector.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28 15:10:14 -08:00
Michael Chan
2dd201d7b7 [BNX2]: Disable jumbo rx paging on 5709 Ax.
The chip has problem running in this mode and needs to be disabled.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28 15:10:13 -08:00
John W. Linville
819d772b0c b43/nphy.c: include headers to avoid build breakage on some platforms
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:10:13 -08:00
Andrew Morton
73738001ac drivers/net/wireless/rt2x00/rt2x00usb.c: fix uninitialized var warning
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:10:12 -08:00
Andrew Morton
d2594d07ab drivers/net/wireless/iwlwifi/iwl-3945.c: fix printk warning
drivers/net/wireless/iwlwifi/iwl-3945.c: In function 'iwl3945_add_radiotap':
drivers/net/wireless/iwlwifi/iwl-3945.c:269: warning: format '%d' expects type 'int', but argument 3 has type 'long unsigned int'

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:10:11 -08:00
Stefano Brivio
222b01b7fe b43legacy: fix use-after-free rfkill bug
Fix rfkill code which caused a use-after-free bug. Thanks to David
Woodhouse for spotting this out.

Cc: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Stefano Brivio <stefano.brivio@polimi.it>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:10:10 -08:00
Holger Schurig
61d30020dc libertas: pepper main with debug statement
libertas: re-pepper debug statementThe recent fluff of updates
didn't put proper lbs_deb_enter/leave calls into the source code.
Add them where appropriate.

Also contains some whitespace changes.

Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:10:07 -08:00
Holger Schurig
c9d1be3619 libertas: don't blindly try mesh
The CF card only has a very old firmware (5.0.16p0). This firmware doesn't
know anything about mesh config. However, current code blindly calls
mesh_config when the card is inserted. So check the firmware version before
issuing this command.

Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:10:06 -08:00
Holger Schurig
dac10a9f28 libertas: always show firmware release
Always shows the firmware release.

Also converts the firmware release into something that is easily comparable.

Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:10:05 -08:00
Holger Schurig
4365929d17 libertas: move cardspecific data to driver
boot2_version is purely USB specific, so move it to struct if_usb_card.

Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:10:05 -08:00
Holger Schurig
ae3e0fcf90 libertas cs/sdio: fix 'NOHZ: local_softirq_pending 08' message
netif_rx should be called only from interrupt context. if_cs and if_sdio receive
packets from other contexts, and thus should call netif_rx_ni.

Signed-off-by: Marc Pignat <marc.pignat@hevs.ch>
Acked-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:10:04 -08:00
Michael Buesch
8ac919be05 b43: Add lots of N-PHY lookup tables
This adds lots of N-PHY related lookup tables.

Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:10:03 -08:00
Reinette Chatre
8a1b024528 iwlwifi: style fixes to usage of << and >> operators
The << and >> operators need space on each side.

Cc: Stefano Brivio <stefano.brivio@polimi.it>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Acked-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:10:03 -08:00
Reinette Chatre
e7a2827cbb iwlwifi: remove reference to non-existent documentation
The external iwlwifi driver comes with a README file that is
referenced by the Kconfig. This README is not present in the
driver included in the kernel. Remove references to this
documentation.

Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Acked-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:10:02 -08:00
Zhu Yi
71972664a4 iwlwifi: Update iwlwifi version stamp to 1.2.23
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:10:01 -08:00
Tomas Winkler
fa254a6807 iwlwifi: 3954 renames iwl3945_rate_scale_priv to iwl3945_rs_sta
This patch renames iwl3945_rate_scale_priv to iwl3945_rs_sta as it
better represents the purpose of this variable.

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28 15:10:00 -08:00
Tomas Winkler
c33104f0a7 iwlwifi: 4965 unify rate scale variable names for station data
1, This patch renames iwl4965_rate_scale_priv to iwl4965_lq_sta.
   This type represents a station's link quality.
2. The names of the variables of this type were rs_priv, lq_data, lq, crl
   across the file. All are now unified under the name lq_sta.

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:09:59 -08:00
Tomas Winkler
98c9221146 iwlwifi: move uCode helper functions to iwl-helpers.h
This patch adds iwl_free_fw_desc ucode helper function.
It also moves ucode helper functions to iwl-helpers.h.

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:09:58 -08:00
Zhu Yi
e655b9f03f iwlwifi: fix problem when rf_killswitch change during suspend/resume
After we delay device initialization until interface up, there are more
conditions for the hardware rf_kill switch states during suspend and
resume. For example, before suspend we can have interface up or down,
rf_kill enable or disable; before resume we can have rf_kill enable or
disable. So there are totally 2^3 = 8 conditions to handle. This patch
addressed this problem and makes sure every condition works correctly.

This patch also merges the device suspend and resume handlers with the
mac_start and mac_stop code since they are basically doing the same
thing.

Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28 15:09:58 -08:00
Zhu Yi
5a66926aa9 iwlwifi: delay firmware loading from pci_probe to network interface open
This patch moves the firmware loading (read firmware from disk and load
it into the device SRAM) from pci_probe time to the first network
interface open time. There are two reasons for doing this:

1. To support kernel buildin iwlwifi drivers. Because kernel initializes
   network devices subsystem before hard disk and SATA subsystem, it is
   impossible to get the firmware image from hard disk in the PCI probe
   handler. Thus delaying the firmware loading into the network
   interface open time is the way to go. Note, we only read the firmware
   image from hard disk the first time the interface is open. After this
   is succeeded, we cache the firmware image into the host memory. This
   is a performance gain when user open and close the interface multiple
   times and is necessary for device suspend and resume.

2. For better power saving. When the iwlwifi modules are loaded (or
   buildin the kernel) but the wireless network interface is not being
   used, it is a good practice the wireless device consumes as less
   power as possible. Unloading the firmware from the wireless device
   and unregister the driver's interrupt handler in the network
   interface close handler provides users a way to achieve this. User
   space network configuration tools (i.e NetworkManager) can also
   contribute here when it detects a wired cable is connected and
   close the wireless interface automatically.

This patch also includes the pci_save/restore_state() fixed by Ian Schram
upon the first version.

Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: Ian Schram <ischram@telenet.be>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:09:57 -08:00
Ben Cahill
3058f02137 iwlwifi: document scan command
Document scan command.

Signed-off-by: Ben Cahill <ben.m.cahill@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:09:56 -08:00
Tomas Winkler
87e4f7dfe5 iwlwifi: remove iwl4965_tx_cmd
This patch removes iwl4965_tx_cmd function and splits its content to
iwl4965_hw_build_tx_cmd_rate, iwl4965_build_tx_cmd_basic,
and iwl4965_tl_get_stats function. The latest one will be deprecated
when traffic load will move to rate scale module.

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:09:55 -08:00
Tomas Winkler
6a218f6f3b iwlwifi: move iwl4965_get_dma_hi_address function to iwl-helpers.h
This patch moves iwl4965_get_dma_hi_address function to iwl-headers.h
as iwl_get_dma_hi_address. This function will be used in more chipsets
than only 4965.

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:09:55 -08:00
Tomas Winkler
440d42c30c iwl4965: Remove redundant code in iwl4965_tx_cmd
This function removes redundant code in iwl4965_tx_cmd
function, leftovers of previous design.

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:09:54 -08:00
Michael Buesch
d159131406 b43: Add NPHY channel switch code
This adds code and table data for channel switching on NPHYs.

Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:09:53 -08:00
Michael Buesch
53a6e2342d b43: Add NPHY radio init code
This adds some code to init the 2055 radio.
This patch adds two files "tables_nphy.h" and "tables_nphy.c"

Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:09:53 -08:00
Michael Buesch
60168f12b9 b43: Add Broadcom 2055 radio register definitions
Add the register definitions for the Broadcom 2055 N-radio.

Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:09:51 -08:00
Helge Deller
60da481b98 WAVELAN - compile-time check for struct sizes
Convert optional struct size checks to non-optional compile-time checks.
Furthermore BUILD_BUG_ON() which will be optimized away by the compiler.

Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:09:50 -08:00
Michael Buesch
eb189d8bc9 b43: Add support for new firmware
This patch adds support for new firmware.
Old firmware is still supported until July 2008.

To get new firmware, go to
ftp://ftp.linksys.com/opensourcecode/wrt150nv11/1.51.3/
and download the tarball. We don't have a smaller tarball, yet.
That will be fixed later.
You can extract firmware out of the "wl_ap.o" file contained
in this tarball using latest fwcutter. You must pass the option
--unsupported to fwcutter.
Fwcutter-010 with official support for a new firmware image will
be released soon.

Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28 15:09:50 -08:00
Michael Buesch
243dcfcc1d b43: Fix radio ID register reading
This fixes reading of the high 16 bits of the radio ID
on new devices. 2055 radios want lo16 to be read first.

Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:09:49 -08:00
Ivo van Doorn
89539ebe2f rt2x00: Fix queue_idx initialization
For TX rings the queue_idx should start at
IEEE80211_TX_QUEUE_DATA0 and for each followup
ring this index needs to be increased.

For the RX ring the queue_idx should be set
to 0. We don't need to initialize the tx_params.

Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:09:48 -08:00
Ivo van Doorn
40561b8426 rt2x00: Data and desc pointer initialization
rt2500usb and rt73usb data and desc pointer initialization
was incorrect because it was using uninitialized variables
to determine the length.

In addition rt2500usb used skb_pull and removed the ieee80211
from each received frame instead of using skb_trim to remove
the device descriptor from the frame.

Finally this also fixes the descriptor override when 4 byte
aligning occured. We still need a completely valid descriptor
when using the TX/RX dumping capabilities in debugfs.

Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:09:47 -08:00
Michael Buesch
dd0d43ea0b b43: Add N-PHY related initvals firmware filenames.
This adds the initval filenames for the N-PHY firmware.

Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:09:47 -08:00
Michael Buesch
47f76ca3a3 b43: Fix tim search buffer overrun
Use the length of the variable section of the beacon instead of the
whole beacon length for bounds checking.

Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:09:46 -08:00
Michael Buesch
280d0e16bc b43: Put multicast frames on the mcast queue
This queues frames flagged as "send after DTIM" by mac80211
on the special multicast queue. The firmware will take care
to send the packet after the DTIM.

Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:09:45 -08:00
Michael Buesch
d4df6f1a9e b43: Fix template upload locking.
This fixes the template upload locking.

Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:09:44 -08:00
Michael Buesch
e66fee6aa0 b43: Fix upload of beacon packets to the hardware
This fixes uploading of the beacon data and writing of the
TIM and DTIM offsets.

Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:09:43 -08:00
Johannes Berg
471b3efdfc mac80211: add unified BSS configuration
This patch (based on Ron Rindjunsky's) creates a framework for
a unified way to pass BSS configuration to drivers that require
the information, e.g. for implementing power save mode.

This patch introduces new ieee80211_bss_conf structure that is
passed to the driver via the new bss_info_changed() callback
when the BSS configuration changes.

This new BSS configuration infrastructure adds the following
new features:
 * drivers are notified of their association AID
 * drivers are notified of association status

and replaces the erp_ie_changed() callback. The patch also does
the relevant driver updates for the latter change.

Signed-off-by: Ron Rindjunsky <ron.rindjunsky@intel.com>
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:09:43 -08:00
Michael Wu
2bc454b0b3 mac80211: Fix rate reporting regression
Mattias Nissler's "clean up rate selection" patch incorrectly changes
the behavior of txrate setting in sta_info. This patch backs out parts
of the rate selection consolidation in order to fix this issue for now.

Signed-off-by: Michael Wu <flamingice@sourmilk.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:09:42 -08:00
Ron Rindjunsky
9ab461732a iwlwifi: A-MPDU Rx flow enabled
This patch enables the A-MPDU Rx flow. it contains several
adjustments to new mac80211 A-MPDU Rx flow.

Signed-off-by: Ron Rindjunsky <ron.rindjunsky@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:09:41 -08:00
Luis R. Rodriguez
132127e505 ath5k: Fix frame duration oops
This patch fixes an oops which was introduced as a regression by
commit fd640775bd16e1df50c867cc547af0, on the patch titled,
"mac80211: dont use interface indices in drivers".

ieee80211_generic_frame_duration() now relies on sdata->flags which
itself gets set upon bringing the interface up. We check for the
virtual interface now before setting the rate duration registers.

After the mode changes are introduced onto mac80211 we should revisit
these changes.

This patch was tested on the following cards:

1) BG card:

Atheros AR5213A chip found (MAC: 0x59, PHY: 0x43)
RF2112A 2GHz radio found (0x46)

2) ABG card:

Atheros AR5213A chip found (MAC: 0x59,PHY: 0x43)
RF5112A multiband radio found (0x36)

Signed-off-by: Luis R. Rodriguez <mcgrof@winlab.rutgers.edu>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:09:40 -08:00
Johannes Berg
32bfd35d4b mac80211: dont use interface indices in drivers
This patch gets rid of the if_id stuff where possible in favour of
a new per-virtual-interface structure "struct ieee80211_vif". This
structure is located at the end of the per-interface structure and
contains a variable length driver-use data area.

This has two advantages:
 * removes the need to look up interfaces by if_id, this is better
   for working with network namespaces and performance
 * allows drivers to store and retrieve per-interface data without
   having to allocate own lists/hash tables

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:09:36 -08:00
Michael Wu
f653211197 Add rtl8180 wireless driver
This patch adds a mac80211 based wireless driver for the rtl8180 and
rtl8185 PCI wireless cards.  Also included are some rtl8187 changes
required due to the relationship between that driver and this one.

Michael Wu is primarily responsible for the initial driver and rtl8185
support.  Andreas Merello provided the additional rtl8180 support.

Thanks to Jukka Ruohonen for the donating a rtl8185 card! It was very
helpful for the rtl8225z2 code.

The Signed-off-by information below is collected from the individual
patches submitted to wireless-2.6 before merging this driver upstream.

Signed-off-by: Andrea Merello <andreamrl@tiscali.it>
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: Michael Wu <flamingice@sourmilk.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:09:35 -08:00
Jiri Slaby
fa1c114fda [PATCH] Net: add ath5k wireless driver
add ath5k wireless driver

Portions of this driver are covered by one or both of the ISC and
3-clause BSD licenses.  Specific license information is cited at the top
of each file.

Acked-by and Signed-off-by information is collected from individual
patches as collected in the wireless-2.6 tree prior to upstream
submission.

Acked-by: Matthew W. S. Bell  <mentor@madwifi.org>
Acked-by: Michael Taylor <mike.taylor@apprion.com>
Acked-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Bradley M. Kuhn <bkuhn@softwarefreedom.org>
Signed-off-by: Bruno Randolf <bruno@thinktube.com>
Signed-off-by: Dave Young <hidave.darkstar@gmail.com>
Signed-off-by: Francesco Gringoli <francesco.gringoli@ing.unibs.it>
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Karen Sandler <karen@softwarefreedom.org>
Signed-off-by: Krzysztof Halasa <khc@pm.waw.pl>
Signed-off-by: Luis R. Rodriguez <mcgrof@gmail.com>
Signed-off-by: Matt Norwood <norwood@softwarefreedom.org>
Signed-off-by: Nick Kossifidis <mickflemm@gmail.com>
Signed-off-by: Richard Fontana <fontana@softwarefreedom.org>
Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: Ulrich Meis <meis@nets.rwth-aachen.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:09:35 -08:00
John W. Linville
3543f8069d b43: finish removal of pio support
As suggested in "b43: Remove PIO support"...

Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:09:34 -08:00
Pavel Roskin
17f65f814f hostap_cs: don't match revisions in presense of the MAC chip name
If the third PCMCIA ID string specifies the MAC chip, the fourth ID
string doesn't need to be matched.  Even if it's different, it will be
compatible with the driver.

This ensures that other different revisions of the card will be
supported.

Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:09:33 -08:00
Michael Buesch
f31800d8b7 b43: Remove the PHY spinlock
This fixes a sparse warning about weird locking.
The spinlock is not needed, so simply remove it.
This also adds some sanity checks to the PHY and radio locking
to protect against recursive locking.

Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:09:32 -08:00
Michael Buesch
5250703e31 b43: Fix PHY register routing
This fixes the PHY routing bit handling.
This is needed for N-PHY.
No functional change to A-PHY and G-PHY code.

Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:09:32 -08:00
Michael Buesch
424047e6c6 b43: Add N-PHY register definitions
This patch adds all register definitions for the N-PHY.
This adds two new files: nphy.h and nphy.c
No functional changes to existing code.

Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:09:31 -08:00
Michael Buesch
9081728b5f zd1211rw: fix alignment for QOS and WDS frames
This patch fixes RX packet alignment issues in the zd1211rw driver.
This is based on a patch by Johannes Berg.

Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:09:30 -08:00
Miguel Botón
01c20986cb iwlwifi: fix compilation warning in 'iwl-4965.c'
This patch fixes a compilation warning in 'iwl-4965.c'.

"warning: format ‘%d’ expects type ‘int’, but argument 3 has type ‘long unsigned int’"

Signed-off-by: Miguel Botón <mboton@gmail.com
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:09:29 -08:00
Ivo van Doorn
93d2334f37 rt2x00: Release rt2x00 2.0.14
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:09:29 -08:00
Ivo van Doorn
7d1de80644 rt2x00: Correctly initialize data and desc pointer
rt2500usb and rt73usb store the descriptor in different
places. This means we should move the initialization of
the 2 pointers to the driver callback function fill_rxdone().

Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:09:28 -08:00
Ivo van Doorn
837e7f247a rt2x00: Move init_txring and init_rxring into rt2x00lib
Prior to enabling the radio rt2x00lib should go through all
rings and for each entry should call the callback function
init_txentry() and init_rxentry().

Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:09:27 -08:00
Ivo van Doorn
7e56d38d5d rt2x00: Determine MY_BSS from descriptor
Use the MY_BSS descriptor field to determine if the
received frame belongs to the same BSS as the interface.
This can be used by rxdone to determine if the frame
should be updated or not.

Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:09:27 -08:00
Ivo van Doorn
dd3193e1c2 rt2x00: Cleanup write_tx_desc() arguments
Send the skb structure with write_tx_desc() and use
the skbdesc structure to read all information about
the frame. This saves several arguments in the function
definition and it is easier to send more information
later as well.

Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:09:26 -08:00
Ivo van Doorn
3c4f2085e5 rt2x00: Move packet filter flags
The packet filter flags don't belong in the interface structure
because they are device based instead of interface based.
So move the filter fields out of struct interface and into rt2x00_dev.

Additionally we shouldn't change the filter based on the working
mode, if such a thing is needed than mac80211 should have done that.

Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:09:25 -08:00
Ivo van Doorn
e37ea2135b rt2x00: Move start() and stop() handlers into rt2x00lib.c
suspend & resume was broken since it called rt2x00mac_start()
and rt2x00mac_stop() which would fail to execute because the
DEVICE_PRESENT flag was not set.

Move the start and stop handlers into rt2x00lib.c which are called
from rt2x00mac_start() and rt2x00mac_stop() after they have checked
the DEVICE_PRESENT flag, while suspend and resume handlers can
directly call those functions.

Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:09:24 -08:00
Ivo van Doorn
042671040d rt2x00: Store queue idx and entry idx in data_ring and data_entry
Store the queue idx inside structure data_ring
Store the entry idx inside structure data_entry
This saves us a few calls to ARRAY_INDEX() which is now unused.

Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:09:24 -08:00
Ivo van Doorn
3867705bb7 rt2x00: Only set the TBCN flag when the interface is configured to send beacons.
These flags used to be fixed to one in rt2500pci_config_type, which
caused the beacon timer interrupt to fire. This would lead to
rt2x00lib_beacondone adding work which called
rt2x00lib_beacondone_scheduled which called ieee80211_beacon_get which
printed an error about not having any beacon data.

With this patch, these interrupts are only generated when the interface
is configured to send beacons.

Signed-off-by: Matthijs Kooijman <matthijs@stdin.nl>
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:09:23 -08:00
Ivo van Doorn
1230cb83f4 rt2x00: Always call ieee80211_stop_queue() when return NETDEV_TX_BUSY
Apparently it was possible that ieee80211_stop_queue() was not full while
NETDEV_TX_BUSY was being reported back. I think that is what causing the WARN_ON().
This moves all calls to ieee80211_stop_queue() in rt2x00mac.c where it is easier
to determine if the queue should be halted.

Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:09:22 -08:00
Ivo van Doorn
3e34c6dcb3 rt2x00: Fix chipset debugfs file
Initialize blob->data before moving the data pointer
Initialize blob->size based on blob->data size

This fixes the empty chipset file in debugfs.

Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:09:21 -08:00
Michael Buesch
96c755a392 b43: Fix any N-PHY related WARN_ON() in the attach stage.
This fixes all WARN_ON()s in the attach stage.

Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:09:21 -08:00
Michael Buesch
d5c71e4641 b43: Add NPHY kconfig option
This adds a new Kconfig option for enabling probing of N-PHYs.
This option will be removed again once the stuff works.
For now it is to help in development. This way real users won't
execute the broken N-PHY codepaths, but the developers can easily
enable N-PHY stuff.

To enable N-PHY probing simply remove the BROKEN dependency
and enable the option in the kernel config.

Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:09:20 -08:00
Miguel Botón
fedb0eefe2 b44: power down PHY when interface down
This is just this patch (http://lkml.org/lkml/2007/7/1/51) but adapted
to the 'b44' ssb driver.

Signed-off-by: Miguel Botón <mboton@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:09:19 -08:00
Michael Buesch
aa6c7ae21d b43: Add definitions for MAC Control register
This adds some definitions for the MAC Control register
and uses them.
This basically is no functional change.

Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:09:17 -08:00
Michael Buesch
03b29773b6 b43: Remove PIO support
Remove b43 PIO support.
DMA works well on all supported devices. There's no reason to use PIO.
Additionally, new devices don't support PIO in hardware anymore.
b43 PIO support is dead and unused code.

After applying this patch please do
git rm drivers/net/wireless/b43/pio.h
git rm drivers/net/wireless/b43/pio.c
to remove the main PIO support code.

Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:09:17 -08:00
Michael Buesch
f3dd3fcc2c b43: Fix chip access validation for new devices
This fixes chip access validation for newer devices
(4318 and up, I think)

This patch fixes probing of a PCMCIA based 4318 device.

Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:09:15 -08:00
Michael Buesch
9db1f6d725 b43: Only select allowed TX and RX antennas
This fixes antenna selection in b43. It adds a sanity check
for the antenna numbers we get from mac80211.

This patch depends on
ssb: Fix extraction of values from SPROM

Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:09:14 -08:00
Michael Buesch
e861b98d5e ssb: Fix extraction of values from SPROM
This fixes extraction of some values from the SPROM.
It mainly fixes extraction of antenna related values, which
is needed for another b43 fix sent later.

Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:09:14 -08:00
Zhu Yi
66c6b139f7 iwlwifi: fix typo in 'drivers/net/wireless/iwlwifi/Kconfig'
Based on a patch by Miguel.

Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Cc: Miguel Boton <mboton.lkml@gmail.com>
Cc: "John W. Linville" <linville@tuxdriver.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:09:13 -08:00
Daniel Walker
27ae4d4328 prism54: remove questionable down_interruptible usage
Reviewing the semaphore usage I noticed these down_interruptible calls.  Most
of these aren't returning anything, so a caller can't tell if the operation
completed or not.  prism54_wpa_bss_ie_get() returns zero, but it's treated as
the function failing which doesn't seem correct.

Signed-off-by: Daniel Walker <dwalker@mvista.com>
Cc: Michael Wu <flamingice@sourmilk.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:09:12 -08:00
John W. Linville
772353d849 Revert "rtl8187: fix tx power reading"
This reverts commit e4128a54d790658ab265c915e5da9153ff74af97.

On Sunday 02 December 2007 17:17:51 Michael Wu wrote:
> CCK and OFDM power levels are stored in adjacent bytes, not nibbles.
>
This turns out to be true only for rtl8180. On rtl8187, power levels are
indeed stored in nibbles, so this patch is wrong. Please revert this patch.

Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:09:11 -08:00
Al Viro
0e5ce1f330 misc wireless annotations
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:09:11 -08:00
Al Viro
5b5e807fb8 ipw2200: do not byteswap struct ipw_associate
keep it little-endian, update places that use its members

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:09:10 -08:00
Al Viro
e62e1ee029 ipw2200 trivial annotations
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:09:09 -08:00
Al Viro
0569056e0d prism54 trivial annotations
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:09:08 -08:00
Al Viro
cecefb8e97 bcm43xx annotations
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:09:08 -08:00
Al Viro
8160c03149 p54pci: endianness annotations and fixes
->ring_control_dma is dma_addr_t, needs conversion to little-endian
before __raw_writel()...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:09:07 -08:00
Al Viro
184a3b2c51 hostap: don't mess with mixed-endian even for internal skb queues
Just leave hfa384x_info_frame as-is, don't convert in place.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:09:06 -08:00
Al Viro
8a9faf3cd0 hostap annotations
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:09:05 -08:00
Al Viro
3eb9b41f24 airo: last of endianness annotations
sanitize handling of ConfigRid

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:09:05 -08:00
Al Viro
329e2c0067 airo: sanitize handling of StatusRid
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:09:04 -08:00
Al Viro
a749716ecc airo: sanitize APListRid handling
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:09:03 -08:00
Al Viro
56d81bd3c7 airo: sanitize handling of CapabilityRid
Don't byteswap any fields, annotate.  That has caught a bug,
BTW - will be handled in the next patch.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:09:02 -08:00
Al Viro
a23ace5f22 airo: sanitize handling of StatsRid
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:09:02 -08:00
Al Viro
4293ea33c8 airo: sanitize handling of WepKeyRid
don't byteswap, update users to match that, annotate.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:09:01 -08:00
Al Viro
17e7049140 airo: sanitize BSSListRid handling
Stop byteswap-in-place in readBSSListRid(), annotate the sucker.
BTW, that had immediately found a bug - another codepath fetching
the same struct from card did _not_ byteswap, but used ->dBm the
same as everything else - host-endian.  Fix in the next patch...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:09:00 -08:00
Al Viro
b8c06bc1f3 bap_read()/bap_write() work with fixed-endian buffers
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:08:59 -08:00
Al Viro
0dd2212fb6 airo: sanitize handling of SSID_rid
* store SSID_rid without conversions
* sanitize proc_SSID_on_close() (and avoid access past the end of
  buffer, while we are at it)

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:08:58 -08:00
Al Viro
593c2b9cf2 airo: trivial endianness annotations
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:08:58 -08:00
Al Viro
4958730e2b ipw2200: ipw_tx_skb() endianness bug
We'd just set tfd->u.data.chunk_len[i] to cpu_to_le16(remaining_bytes);
passing it to pci_map_single() is a bad idea - it expects host-endian.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:08:57 -08:00
Al Viro
472caf8c8a ipw2200 fix: ->rt_chbitmask is le16
A couple of places forgot cpu_to_le16() in assignments to
that field, even though right next to those in other branches
of if-else we do it correctly.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:08:56 -08:00
Al Viro
743b84d2fc ipw2200 fix: struct ieee80211_radiotap_header is little-endian
some places in driver forget conversions

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:08:56 -08:00
Al Viro
7698d6977a ray_cs fixes
bugs galore:
	* 0xf380 instead of htons(ETH_P_AARP), etc.  Works only on l-e.
	* back in 2.3.20 driver got readb() and friends instead of
direct dereferencing of iomem.  Somebody got too enthusiatic and replaced
	ntohs(p->mrx_overflow)
with
	ntohs(read(&p->mrx_overflow)
without noticing that (a) the sucker is 16bit and (b) that expression can't possibly
be portable anyway (hell, on l-e it's always less than 256, on b-e it's always a
multiple of 256).  Proper fix is
	swab16(readw(&p->mrx_overflow)
taking into account the conversion done by readw() itself.  That crap happened
in several places; the same fix applies.
	* untranslate() assumes little-endian almost everywhere, except for
the code checking for IPX/AARP packets; there we forgot ntohs(), so that part
only works on big-endian.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:08:55 -08:00
Al Viro
1edd3a5553 ipw2100 annotations and fixes
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:08:54 -08:00
Al Viro
dc73c623dd p54common annotations and fixes
* ->exp_id in bootrec_exp_if is __le16; missing conversion in its use
* !(x & y) misspelled as !x & y

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:08:53 -08:00
Al Viro
e0c0056c67 hostap: fix endianness with txdesc->sw_support
it's le32, not le16...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:08:53 -08:00
Al Viro
2ab1f519cb airo: fix writerids() endianness
in writerids() we do _not_ byteswap, so we want to access
->opmode as little-endian.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:08:52 -08:00
Al Viro
15617858b3 airo endianness bug: cap_rid.extSoftCap
never had been byteswapped, used as host-endian...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:08:51 -08:00
Al Viro
0300b3321d airo: bug in airo_interrupt() handling on incoming 802.11
On big-endian we end up with swapped first two bytes in packet,
due to earlier conversion to host-endian and forgotten conversion
back.

The code we calculated that host-endian for had been duplicated
several time - it finds the 802.11 MAC header length by the first
two bytes of packet; taken into a new helper (header_len(__le16 ctl)).

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:08:50 -08:00
Al Viro
851b3e5e3d airo: fix endianness bug in ->dBm handling
airo_translate_scan() reads BSSListRid directly, does _not_ byteswap
and uses ->dBm (__le16) as host-endian.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:08:50 -08:00
Al Viro
977b143c13 airo: fix transmit_802_11_packet()
a) gaplen would better be stored little-endian
b) for control packets (shorter than 24-byte header) we ended up with
        bap_write(ai, hdrlen == 30 ?
                (const u16*)&gap.gaplen : (const u16*)&gap, 38 - hdrlen, BAP1);
passing to card the data past the end of gap (i.e. random stuff from stack)
and did _not_ feed the gaplen at the right offset.
c) sending the contents of uninitialized fields of struct is Not Nice(tm) either

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:08:49 -08:00
Al Viro
8fffc15dc7 eliminate byteswapping in struct ieee80211_qos_parameters
Make it match the on-the-wire endianness, eliminate byteswapping.
The only driver that used this sucker (ipw2200) updated.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:08:45 -08:00
John W. Linville
c0ddd04d55 wireless: cleanup some merge errors
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:08:45 -08:00
Patrick McHardy
f12ca5f97b [MACVLAN]: Fix thinko in macvlan_transfer_operstate()
When the lower device's carrier is off, the macvlan devices's
carrier state should be checked to decide whether it needs to
be turned off. Currently the lower device's state is checked
a second time.

This still works, but unnecessarily tries to turn off the
carrier when its already off.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28 15:08:36 -08:00
Patrick McHardy
9dfebcc647 [VLAN]: Turn VLAN_DEV_INFO into inline function
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28 15:08:32 -08:00
Adrian Bunk
16b4d60b56 [IrDA]: Irport removal - part 2
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Samuel Ortiz <samuel@sortiz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28 15:08:10 -08:00
Adrian Bunk
e9888f5498 [IrDA]: Irport removal - part 1
This patch removes IrPORT and the old dongle drivers (all off them
have replacement drivers).

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Samuel Ortiz <samuel@sortiz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28 15:08:10 -08:00
Stefan Roese
ee63d22b89 net: NEWEMAC: Fix problem with mtu > 4080 on non TAH equipped 4xx PPC's
Currently, all non TAH equipped 4xx PPC's call emac_start_xmit() upon
xmit. This routine doesn't check if the frame length exceeds the max.
MAL buffer size.

This patch now changes the driver to call emac_start_xmit_sg() on all
GigE platforms and not only the TAH equipped ones (440GX). This enables
an MTU of 9000 instead 4080.

Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-28 15:08:04 -08:00
Claudio Lanconelli
3ec9c11da0 add driver for enc28j60 ethernet chip
Signed-off-by: Claudio Lanconelli <lanconelli.claudio@eptar.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-28 15:08:03 -08:00
Thomas Bogendoerfer
a24a789cc6 SGISEEQ: fix oops when doing ifconfig down; ifconfig up
When doing init_ring checking whether a new skb needs to be allocated
was wrong.

Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-28 15:08:02 -08:00
Stephen Hemminger
bcc5289498 sky2: version 1.21
Update driver version reflects new hardware support.

Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-28 15:08:02 -08:00
Stephen Hemminger
ed4d41616b sky2: support for Yukon Supreme
Add support from sk98lin vendor driver 10.50.1.3 for 88E8055 and
88E8075 chips.  I don't have this hardware to test, so this changes
are untested.

Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-28 15:08:01 -08:00
Al Viro
804d8541d2 qla3xxx annotations
stop the byteswap-in-place, annotate

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-28 15:08:00 -08:00
Al Viro
7cd61888d2 slhc annotations
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-28 15:07:59 -08:00
Al Viro
3dd5f1d422 eepro100 annotations
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-28 15:07:59 -08:00
Al Viro
904584018e annotate the rest of drivers/net/wan
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-28 15:07:58 -08:00
Al Viro
a3edb08311 annotate tun
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-28 15:07:57 -08:00
David Miller
7eefb04eb0 NET: ns83820.c remove fastcall macro
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-28 15:07:56 -08:00
Thomas Bogendoerfer
49b11bc3d4 SGISEEQ: use cached memory access to make driver work on IP28
- Use inline functions for dma_sync_* instead of macros
- added Kconfig change to make selection for similair SGI boxes easier

Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-28 15:07:56 -08:00
Zhu Yi
a0646470e8 iwlwifi: skip mac80211 conf during a hardware scan and replay it afterwards
This patch skips mac80211 configuration setting during a hardware scan
and replays it afterwards for the iwlwifi drivers.

Cc: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:07:54 -08:00
Zhu Yi
12342c475f iwlwifi: proper monitor support
This patch changes the iwlwifi driver to properly support
monitor interfaces after the filter flags change.

The patch is originally created by Johannes Berg for iwl4965. I fixed some
of the comments and created a similar patch for iwl3945.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:07:53 -08:00
David Woodhouse
7e94041ca1 libertas: remove check for driver_lock in lbs_interrupt()
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:07:52 -08:00
David Woodhouse
5844d12ea3 libertas: convert SUBSCRIBE_EVENT to a direct command
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:07:51 -08:00
David Woodhouse
f15ebb63b3 libertas: change inference about buffer size in lbs_cmd()
sizeof(*cmd) is going to give the total size of the data structure that
we allocated, more often than not. But the size of the command to be
_sent_ could be a lot smaller, as it is in the KEY_MATERIAL and
SUBSCRIBE_EVENT commands for example. So swap them round; let the caller
set the _command_ size explicitly in the header, and infer the
maximum response size from the data structure.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:07:51 -08:00
David Woodhouse
4f59abf190 libertas: convert ENABLE_RSN to a direct command
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:07:50 -08:00
David Woodhouse
f70dd4515a libertas: convert SET_WEP to a direct command
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:07:49 -08:00
David Woodhouse
3fbe104cec libertas: convert SLEEP_PARAMS to a direct command
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:07:49 -08:00
David Woodhouse
6e5cc4fb35 libertas: convert INACTIVITY_TIMEOUT to a direct command
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:07:48 -08:00
David Woodhouse
a7c4589065 libertas: convert RADIO_CONTROL to a direct command
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:07:47 -08:00
David Woodhouse
354eca9820 libertas: submit RSSI command on tx timeout, to check whether module is dead
We don't necessarily want to reset the device on a TX timeout. But more
often than not, the real cause is that the firmware has crapped itself,
not just that the network is busy. So submit any harmless command, and
if _that_ times out, then the error handling code will reset the module,
as appropriate.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:07:46 -08:00
David Woodhouse
18c52e7c3e libertas: make lbs_submit_command always 'succeed' and set command timer
Even if it fails, we want to wait a while and try again, with an
ultimate timeout if it the condition persists. So again, just use the
standard command timeout behaviour.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:07:46 -08:00
David Woodhouse
8538823f7c libertas: discard DEFER responses to commands; let the timeout trigger
When the firmware returns 0x0004, it wants us to try again later. We can
achieve that simply by throwing out the response and letting the command
timeout code kick in.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:07:45 -08:00
David Woodhouse
7003b078c8 libertas: use priv->upld_buf for command responses
If we don't scribble over the command we sent, then we can retry it when
the firmware responds with 0x0004 (which means -EAGAIN).

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:07:44 -08:00
David Woodhouse
ac4cced6e8 libertas: reduce explicit references to priv->cur_cmd->cmdbuf
We have a local variable 'resp' which we use for this. So use it,
instead of typing the whole thing.

In preparation for actually using priv->upld_buf for the responses
instead...

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:07:44 -08:00
David Woodhouse
4694961cc2 libertas: Check for PS mode support on USB devices
Move the various firmware setup bits into a separate function, which
used to do just boot2 version.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:07:43 -08:00
David Woodhouse
b2c57eee66 libertas: allow for PS mode to be disabled when firmware doesn't support it
Otherwise, we go into an endless busy loop trying to enable PS mode when
the command queue is empty, dealing with the error response, and then
trying to enable PS mode again because the command queue is empty.... it
doesn't really save much power.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:07:42 -08:00
David Woodhouse
b47ef2438d libertas: handle HOST_AWAKE event by sending WAKEUP_CONFIRM command
lbs_send_confirmwake() is a bit ugly but matches the way we confirm
sleep. We'll deal with that whole thing later.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:07:42 -08:00
David Woodhouse
24dba5f391 libertas: don't clear priv->dnld_sent after sending sleep confirm
DNLD_RES_RECEIVED is a bit of a misnomer -- we never wait for the result
to be received; it's purely representing the state of the TX path, and
in this case the TX path is definitely busy.

Of course, that means that we don't actually care about DATA_SENT vs.
CMD_SENT either, but that's a can of worms for another day...

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:07:41 -08:00
David Woodhouse
38bfab1a01 libertas: fix buffer handling of PS_MODE commands and responses
Commit 5b8845345e7385d2eb37fac22ba9ab6905988be5 (or, in case the git
workflow is broken and patches get recommitted, the commit entitled
'libertas: rename and re-type bufvirtualaddr to cmdbuf' by dcbw),
introduced a number of bugs where we once had a pointer to a command
_payload_, but now we use the pointer to the command header instead.

The fix isn't wonderfully pretty for now, but it'll get better when we
finish converting all commands so the structures include the header.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:07:40 -08:00
David Woodhouse
c6ad3738c6 libertas: add SLEEP_PERIOD and FW_WAKE_METHOD command definitions
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:07:39 -08:00
David Woodhouse
d1a469fd1b libertas: fix return from lbs_update_channel()
If we return the channel number in a 'ret' variable where anything
non-zero is later interpreted as an error, that isn't nice. It breaks
WPA, for a start. OLPC trac #5485

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:07:39 -08:00
David Woodhouse
681ffbb7d4 libertas: kill 'addtail' argument to lbs_queue_cmd() and make it static
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:07:38 -08:00
David Woodhouse
2a345099a4 libertas: handle command timeout in main thread instead of directly in timer
And handle the case where it times out more than once, too, instead of
locking up for ever.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:07:37 -08:00
David Woodhouse
9fae899c2b libertas: ensure response buffer size is always set for lbs_cmd_with_response
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:07:37 -08:00
David Woodhouse
3399ea5f23 libertas: add __lbs_cmd_async() for asynchronous command submission
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:07:36 -08:00
David Woodhouse
ae125bf827 libertas: store command result in cmdnode instead of priv->cur_cmd_retcode
... at least for users of __lbs_cmd().

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:07:35 -08:00
David Woodhouse
75567670c6 libertas: kill pdata_buf member of struct cmd_ctrl_node
We can use the callback_arg for it; that's the way we're heading anyway...

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:07:34 -08:00
David Woodhouse
ad12d0f418 libertas: let __lbs_cmd() free its own cmdnode
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:07:34 -08:00
David Woodhouse
5ba2f8a021 libertas: kill cleanup_cmdnode()
Move the wakeup into lbs_complete_command(), and leave the other bits
in __lbs_cleanup_and_insert_cmd() which was the only caller now anyway.

There are two remaining direct callers of lbs_cleanup_and_insert_cmd(),
and they are both fine without the wakeup.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:07:33 -08:00
David Woodhouse
ecfe9b487c libertas: don't re-initialise cmdnode when taking it off the free queue
We initialise it when we add it to the queue. No need to do it again.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:07:32 -08:00
David Woodhouse
183aeac1c4 libertas: introduce and use lbs_complete_command() for command completion
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:07:31 -08:00
David Woodhouse
c4ab41272b libertas: remove some pointless checks for cmdnode buffer being present
We allocate them all at the same time, at startup. If they go missing,
we have more serious things to worry about, and the resulting oops will
be a perfectly acceptable result.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:07:31 -08:00
David Woodhouse
b23b2061e5 libertas: don't use __lbs_cmd() with empty callback in if_usb.c
We're about to change semantics, leaving callers of
lbs_prepare_and_send_command() with the old broken priv->cur_cmd_retcode
crap. The existence of the callback command will be the trigger for the
new semantics when handling the response.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:07:30 -08:00
David Woodhouse
d9896ee147 libertas: rename and clean up DownloadcommandToStation
Call it lbs_submit_command(), remove a bunch of things which can be (or,
in the case of zeroing ->cmdwaitqwoken, already are) done elsewhere.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:07:29 -08:00
David Woodhouse
8e5b6b2d32 libertas: kill unused wait_option field in struct cmd_ctrl_node
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:07:28 -08:00
David Woodhouse
7e226272fc libertas: kill whitespace at end of lines
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:07:28 -08:00
David Woodhouse
eae86bf378 libertas: clean up if_usb driver
It was just getting on my tits, really.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:07:27 -08:00
David Woodhouse
b926d6b31e libertas: stop attempting to reset devices on unload
It wasn't working anyway -- by the time we get into if_usb_disconnect()
the USB core has already stopped us talking to the thing; even if it's
just on unload and the device still exists.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:07:26 -08:00
David Woodhouse
d9f88705a7 libertas: don't exit worker thread until kthread_stop() is called
The kthread code can't cope with a thread exiting of its own accord and
then someone calling kthread_stop() for it. When the thread detects that
it needs to die, make it wait for kthread_stop() to be called.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:07:26 -08:00
Larry Finger
4ad36d780c b43legacy: Fix rfkill radio LED
This fixes Bug #9414 for b43legacy. This patch is the equivalent of one
submitted earlier for b43.

Since addition of the rfkill callback, the LED associated with the off
switch on the radio has not worked for several reasons:

(1) Essential data in the rfkill structure were missing.
(2) The rfkill structure was initialized after the LED initialization.
(3) There was a minor memory leak if the radio LED structure was inited.

Once the above problems were fixed, additional difficulties were noted:

(4) The radio LED was in the wrong state at startup.
(5) The radio switch had to be manipulated twice for each state change.
(6) A circular mutex locking situation existed.
(7) If rfkill-input is built as a module, it is not automatically loaded.

This patch fixes all of the above and removes a couple of sparse warnings.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Stefano Brivio <stefano.brivio@polimi.it>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:07:25 -08:00
Ramkrishna Vepa
b7c5678f0b S2io: Fixes to enable multiple transmit fifos
Multiple transmit fifo initialization -
  - Assigned equal scheduling priority for all configured FIFO's.
  - Modularized transmit traffic interrupt initialization since it is executed in
    s2io_card_up and s2io_link. Enable continuous tx interrupt when link is UP
    and vice verse.
  - Enable transmit interrupts for all configured transmit fifos.
  - Fixed typo errors.

Signed-off-by: Surjit Reang <surjit.reang@neterion.com>
Signed-off-by: Sreenivasa Honnur <sreenivasa.honnur@neterion.com>
Signed-off-by: Ramkrishna Vepa <ram.vepa@neterion.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-28 15:07:24 -08:00
Surjit Reang
2fda096d18 S2io: Fixes to enable multiple transmit fifo support
Fixes to enable multiple transmit fifos (upto a maximum of eight).
  - Moved single tx_lock from struct s2io_nic to struct fifo_info.
  - Moved single ufo_in_band_v structure from struct s2io_nic to struct
    fifo_info.
  - Assign the respective interrupt number for the transmitting fifo in the
    transmit descriptor (TXD).
- Added boundary checks for number of FIFOs enabled and FIFO length.

Signed-off-by: Surjit Reang <surjit.reang@neterion.com>
Signed-off-by: Sreenivasa Honnur <sreenivasa.honnur@neterion.com>
Signed-off-by: Ramkrishna Vepa <ram.vepa@neterion.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28 15:07:23 -08:00
Divy Le Ray
bc4b6b5269 cxgb3 - Fix EEH, missing softirq blocking
set_pci_drvdata() stores a pointer to the adapter,
not the net device.
Add missing softirq blocking in t3_mgmt_tx.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-28 15:07:22 -08:00
Divy Le Ray
b881955b7d cxgb3 - parity initialization for T3C adapters.
Add parity initialization for T3C adapters.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-28 15:07:22 -08:00
Matthias Kaehlcke
01f31ac828 PLIP driver: convert the semaphore killed_timer_sem to completion
Signed-off-by: Matthias Kaehlcke <matthias.kaehlcke@gmail.com>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-28 15:07:20 -08:00
Lee Schermerhorn
07b270eab5 bnx2x depends on ZLIB_INFLATE
The bnx2x module depends on the zlib_inflate functions.  The build will
fail if ZLIB_INFLATE has not been selected manually or by building another
module that automatically selects it.

Modify BNX2X config option to 'select ZLIB_INFLATE' like BNX2
and others.  This seems to fix it.

Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com>
Acked-by: Eliezer Tamir <eliezert@broadcom.com>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-28 15:07:20 -08:00
Robert P. J. Day
9329f4e4d2 pcmcia net: use roundup_pow_of_two() macro instead of grotesque loop
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Cc: Jeff Garzik <jeff@garzik.org>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-28 15:07:19 -08:00
Auke Kok
67b3c27c8a e1000: Dump the eeprom when a user encounters a bad checksum
To help supporting users with a bad eeprom checksum, dump the
eeprom info when such a situation is encountered by a user.

Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-28 15:07:18 -08:00
Matheos Worku
8b32e63d48 ixgb: enable sun hardware support for broadcom phy
Implement support for a SUN-specific PHY.

SUN provides a modified 82597-based board with their own
PHY that works with very little modification to the code. This
patch implements this new PHY which is identified by the
subvendor device ID. The device ID of the adapter remains
the same.

Signed-off-by: Matheos Worku <matheos.worku@sun.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-28 15:07:17 -08:00
Adrian Bunk
67cefcbafc e1000: remove no longer used code for pci read/write cfg
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-28 15:07:17 -08:00
Al Viro
a7df90a519 ixgb endianness annotations
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-28 15:07:16 -08:00
Al Viro
8327d000e0 ixgbe endianness annotations
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-28 15:07:15 -08:00
Al Viro
aaf918ba8c e100 endianness annotations
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-28 15:07:15 -08:00
Al Viro
5bb7ea2614 forcedeth endianness bugs
* misannotation: struct register_test members are actually host-endian
* bug: cpu_to_le64(n) >> 32 instead of cpu_to_le32(n >> 32) in setting
->bufhigh and similar for ->buflow (take low bits, _then_ convert to
little-endian, not the other way round).
* bug: setup_hw_rings() should not convert to little-endian at all (we
feed the result to writel(), not store in shared data structure), let
alone try to play with shifting and masking little-endian values.  Introduced
when setup_hw_rings() went in, screwed both 64bit case and the old code for
32bit rings it had replaced.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-28 15:07:13 -08:00
Al Viro
79ea13ce07 NULL noise in drivers/net
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28 15:07:12 -08:00
Al Viro
3e18826c73 e1000 endianness annotations
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-28 15:07:11 -08:00
Al Viro
a39fe742e7 e1000e endianness annotations
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-28 15:07:11 -08:00
Al Viro
439104b3a3 sungem endianness annotations
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-28 15:07:10 -08:00
Al Viro
f3ec33e587 sunhme endianness annotations
This one is interesting - SBUS and PCI variants have
opposite endianness in descriptors (SBUS is sparc-only, so there
host-endian == big-endian).

	Solution: declare a bitwise type (hme32) and in accessor
helpers do typechecking and force-casts (once we know that the
type is right).

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-28 15:07:09 -08:00
Al Viro
b710b43c30 endianness annotations and fixes for olympic
* missing braces in !readl(...) & ...
	* trivial endianness annotations
	* in olympic_arb_cmd() the loop collecting fragments of
packet is b0rken on big-endian - we have
	(next_ptr && (buf_ptr=olympic_priv->olympic_lap + ntohs(next_ptr)))
as condition and it should have swab16(), not ntohs() - it's host-endian
byteswapped, not big-endian.  So if we get more than one fragment on big-endian
host, we get screwed.
	This ntohs() got missed back when the rest of those had been switched
to swab16() in 2.4.0-test2-pre1 - at a guess, nobody had hit fragmented
packets during the testing of PPC fixes.

PS: Ken Aaker cc'd on assumption that he is the same guy who'd done the
original set of PPC fixes in olympic

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-28 15:07:08 -08:00
David Woodhouse
f5a3ea6f96 libertas: use spin_is_locked() instead of spin_trylock() in lbs_interrupt()
We get scary warnings on UP if we use spin_trylock() and find, as we
hoped, that the lock in question is already locked.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:07:08 -08:00
David Woodhouse
860621347e libertas: pass channel argument directly to lbs_mesh_config()
There is weirdness here; the firmware seems to refuse to change channels
at will.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:07:07 -08:00
David Woodhouse
020f3d0001 libertas: cope with both old and new mesh TLV values
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:07:06 -08:00
David Woodhouse
9f4625776f libertas: make lbs_update_channel() function non-static
We'll want to use this for meshfrobbing

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:07:06 -08:00
David Woodhouse
506e9025e0 libertas: add ethtool support for wake-on-lan configuration
Also, check that suspend is refused if HOST_SLEEP_CFG hasn't been done.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:07:05 -08:00
David Woodhouse
d1f7a5b8cf libertas: implement suspend/resume for USB devices
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:07:04 -08:00
David Woodhouse
ab25ecaea5 libertas: implement suspend and resume core methods
We (ab)use priv->fw_ready to stop the worker thread from sending more
commands or data after the response to the HOST_SLEEP_ACTIVATE command
comes in. And we set it from the callback function _directly_ to ensure
that the worker thread sees it immediately; if we did it in
lbs_suspend() after waking up, that might be too late.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:07:03 -08:00
David Woodhouse
f3db2bb411 libertas: make worker thread not freezable
We want it to send the HOST_SLEEP_ACTIVATE command on the way down...

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:07:03 -08:00
David Woodhouse
689442dca1 libertas: switch lbs_cmd() to take a _pointer_ to the command structure
This way, it looks more like a normal function.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:07:02 -08:00
David Woodhouse
6ce4fd2a3a libertas: add lbs_host_sleep_cfg() command function
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:07:01 -08:00
David Woodhouse
a27b9f96f2 libertas: slight cleanup of netif queue stop/wake
In particular, we shouldn't be waking the queues in lbs_host_to_card_done()
any more.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:07:00 -08:00
David Woodhouse
23d36eec26 libertas: add missing newlines in debugging statements
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:07:00 -08:00
David Woodhouse
e1258177e4 libertas: be more careful about command responses matching cur_cmd
Especially in the light of OLPC trac #5461, in which the firmware starts
sending us seemingly random command responses which bear little relation
to the command we sent it.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:06:59 -08:00
David Woodhouse
06113c1c70 libertas: add debugging output to lbs_mesh_config()
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:06:58 -08:00
David Woodhouse
8642f1f062 libertas: disable mesh temporarily while setting eth channel/assoc
Otherwise the device won't let us change channels.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:06:58 -08:00
David Woodhouse
88ae2915cc libertas: add missing newline on debug message
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:06:57 -08:00
David Woodhouse
823eaa2cc2 libertas: allow setting channel on mshX device
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:06:56 -08:00
David Woodhouse
f5956bf1e4 libertas: allow get/set SSID on mshX device
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:06:56 -08:00
David Woodhouse
387a1f046f libertas: whitespace cleanup in host.h
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:06:55 -08:00
David Woodhouse
202f3f3ac9 libertas: kill rx_urb_recall and eth_dev members of struct usb_card_rec
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:06:54 -08:00
David Woodhouse
1f8a08342c libertas: kill references to mesh autostart
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:06:53 -08:00
David Woodhouse
23a397ac82 libertas: add lbs_mesh sysfs attribute for enabling mesh
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:06:53 -08:00
David Woodhouse
e7240acae3 libertas: fix sparse endianness warnings in scan.c
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:06:52 -08:00
David Woodhouse
2fd6cfe307 libertas: make some more functions static
sparse was getting on my tits.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:06:51 -08:00
Dan Williams
cb182a6028 libertas: endianness fixes for get_channel/set_channel
Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:06:50 -08:00
Dan Williams
2dd4b26264 libertas: convert RF_CHANNEL to a direct command
Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:06:50 -08:00
Dan Williams
8e3c91bb70 libertas: convert DATA_RATE to a direct command
Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:06:49 -08:00
Dan Williams
79a9a37c1e libertas: fix case of FWT_ACCESS_LIST_ROUTE and FWT_ACCESS_LIST_NEIGHBOR commands
Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:06:48 -08:00
David Woodhouse
0f1c8232e8 libertas: remove casts from lbs_cmd() and lbs_cmd_with_response() macros
If stupid people like me give it arguments with the wrong type (like a
pointer to the structure, for example, instead of the structure itself),
then we should probably notice that at compile time. Otherwise, much
confusion ensues.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:06:47 -08:00
David Woodhouse
301eacbf30 libertas: convert CMD_MESH_ACCESS to a direct command
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:06:46 -08:00
David Woodhouse
ad9d7a7f3c libertas: fix debug output in lbs_cmd_copyback() function.
Bad dcbw. Always test on big-endian, or at least use sparse.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:06:46 -08:00
Dan Williams
ddac452680 libertas: rename and re-type bufvirtualaddr to cmdbuf
Make it a struct cmd_header, since that's what it is, and clean up
the places that it's used.

Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:06:45 -08:00
David Woodhouse
c9cd6f9d63 libertas: wait for 'firmware ready' event from firmware after loading
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:06:44 -08:00
David Woodhouse
10bca0d5f4 libertas: move removal of lbs_rtap file to lbs_stop_card()
This prevents us from trying to remove it when it didn't exist, in the
error case.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:06:44 -08:00
David Woodhouse
6bc822b516 libertas: switch USB cardp->priv to 'struct lbs_private *' and resulting fix
Amazing what interesting things the compiler will tell you if you let it
know what types you expect to be passing around.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:06:43 -08:00
Dan Williams
6e66f03ff7 libertas: convert GET_HW_SPEC to a direct command
Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:06:42 -08:00
Dan Williams
a8bdcd71fd libertas: add simple copyback command callback
A simple callback which copies the response back into the
command buffer that was used to send the command to the
card.  Will allow for direct command processing outside
the mega-switches in cmd.c and cmdresp.c.

Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:06:41 -08:00
Dan Williams
7ad994dec7 libertas: clean up direct command handling
Move direct command handling through __lbs_cmd() over to using the
header as the first member of the command structure, and only define
the __lbs_cmd() callback in one place rather than 3.  Convert boot2
version command to new usage.

Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:06:41 -08:00
David Woodhouse
b15152a403 libertas: don't run thread while firmware not yet ready
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:06:40 -08:00
David Woodhouse
4f82f5c853 libertas: switch to a waitqueue and timer for handling USB firmware load
No need to busy-wait, even if we did have a 100ms delay in the loop.
This makes it easier to support the new 'firmware ready' event which is
in the new firmware, too.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:06:39 -08:00
David Woodhouse
c8ba39d060 libertas: improve reliability of firmware reloading on USB
Increase the delay between issuing the RESET command and the usb reset,
and be prepared to discard more than one 'normal' packet from it before
it resets.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:06:39 -08:00
David Woodhouse
8552855f98 libertas: make rtap and normal modes mutually exclusive, clean up open/stop
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:06:38 -08:00
Dan Williams
852e1f2a26 libertas: clean up is_command_allowed_in_ps()
Total overkill to have an array when there's only one command in it.

Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:06:37 -08:00
David Woodhouse
b31d8b90dc libertas: remove pre_open_check()
The firmware is always initialised before we register the netdevices.
It's not possible for pre_open_check() to fail.

One day we might try loading firmware in ->open(), but still it won't be
just a _check_, like this.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:06:36 -08:00
Dan Williams
14e865ba5d libertas: make lbs_cmd() usage nicer
Define a macro that relieves the caller from having to use sizeof on
the command structure when calling lbs_cmd(), and move the prototype
of __lbs_cmd() to a new cmd.h file.

Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:06:36 -08:00
David Woodhouse
4f67949656 libertas: clean up lbs_interrupt()
Make it take struct lbs_private as argument; that's all it wants anyway,
and all callers were starting off from that. Don't wake the netif
queues, because those should be handled elsewhere. And sort out the
locking, with a big nasty warning for those who don't have the
driver_lock locked when they call it.

Oh, and fix if_cs.c to lock the driver_lock before calling it.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:06:35 -08:00