forked from Minki/linux
56c1d2335b
2328 Commits
Author | SHA1 | Message | Date | |
---|---|---|---|---|
Marc Zyngier
|
d04594c2f5 |
ARM: shmobile: remove use of gic_arch_extn.irq_set_wake
shmobile only uses gic_arch_extn.irq_set_wake to prevent the GIC from returning -ENXIO when receiving a wake-up configuration request. It is a lot simpler to tell the irq layer that we don't need any configuration by using the IRQCHIP_SKIP_SET_WAKE, thanks to the new gic_set_irqchip_flags function. Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Link: https://lkml.kernel.org/r/1426088737-15817-3-git-send-email-marc.zyngier@arm.com Signed-off-by: Jason Cooper <jason@lakedaemon.net> |
||
Uwe Kleine-König
|
543c5040f5 |
ARM: make arrays containing machine compatible strings const
The definition static const char *axxia_dt_match[] __initconst = { ... defines a changable array of constant strings. That is you must not do: *axxia_dt_match[0] = 'k'; but axxia_dt_match[0] = "different string"; is fine. So the annotation __initconst is wrong and yields a compiler error when other really const variables are added with __initconst. As the struct machine_desc member dt_compat is declared as const char *const *dt_compat; making the arrays const is the better alternative over changing all annotations to __initdata. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
Linus Torvalds
|
18656782a8 |
ARM: SoC driver updates
These are changes for drivers that are intimately tied to some SoC and for some reason could not get merged through the respective subsystem maintainer tree. This time around, much of this is for at91, with the bulk of it being syscon and udc drivers. Also, there's: - coupled cpuidle support for Samsung Exynos4210 - Renesas 73A0 common-clk work - of/platform changes to tear down DMA mappings on device destruction - a few updates to the TI Keystone knav code -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJU4upSAAoJEIwa5zzehBx3HkUP/Rc4B1yZChNIFNfVq4dbei6w dT9WdFmxOIj2JLeXEypFBiNf1nSHmsxrZe9/IDACz2fYQOnaZZ6/786utUJP/PtC 2GDJy9cjL2Xh03We3nQp5z6J33XvpEni1t82cOpCl8wLBOQNnkjEks8UvLgi1LHW CNLcMm8JtDQ2aB/gRTjzetp9liZluESY5+Mig+loE2F/rzbMbNQDcWDDgUPyIQIS 1onL+Bad3BnGFdo/+qnkurGc81pxoKiQJty06VWFftzvIwxXhsNjrqls2+KzstAx 0lLvW1tqaDhXvUBImRM8GgfbldZslsgoFVmgESS9MpPMBNENYrkAiQNvJUnM7kd9 qHDQNq+zRNsz/k4fVvp/YUp7xEiAo4rLcFmp/dBr535jS2LNyiZnB94q+kXsin/m tiyEMx+RWxEHTEHN9WdKE61Ty1RbzOa5UTLSzOKFAkF+m2nvuQsJvb97n19coAq9 SSsj/wJgesfqrDEegphCDh1fyVxUzlAjjhTAyvPS155WvPzkbxZxuBbSqRuriRKA 2aCfVne2ELimHAr3LEPgPW2kFBcONHckOGe6MvrTX4zPHU8bb9WIeg+iGdQChnr3 nclT9jq+ZnQro5XTgUtPtadq100oEXlJbqpAzhd+cJbvgzSNbcWfcgE6kOWqd9uK oeWQWFLCdXLmXf9zCwmk =T7R2 -----END PGP SIGNATURE----- Merge tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver updates from Olof Johansson: "These are changes for drivers that are intimately tied to some SoC and for some reason could not get merged through the respective subsystem maintainer tree. This time around, much of this is for at91, with the bulk of it being syscon and udc drivers. Also, there's: - coupled cpuidle support for Samsung Exynos4210 - Renesas 73A0 common-clk work - of/platform changes to tear down DMA mappings on device destruction - a few updates to the TI Keystone knav code" * tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (26 commits) cpuidle: exynos: add coupled cpuidle support for exynos4210 ARM: EXYNOS: apply S5P_CENTRAL_SEQ_OPTION fix only when necessary soc: ti: knav_qmss_queue: change knav_range_setup_acc_irq to static soc: ti: knav_qmss_queue: makefile tweak to build as dynamic module pcmcia: at91_cf: depend on !ARCH_MULTIPLATFORM soc: ti: knav_qmss_queue: export API calls for use by user driver of/platform: teardown DMA mappings on device destruction usb: gadget: at91_udc: Allocate udc instance usb: gadget: at91_udc: Update DT binding documentation usb: gadget: at91_udc: Rework for multi-platform kernel support usb: gadget: at91_udc: Simplify probe and remove functions usb: gadget: at91_udc: Remove non-DT handling code usb: gadget: at91_udc: Document DT clocks and clock-names property usb: gadget: at91_udc: Drop uclk clock usb: gadget: at91_udc: Fix clock names mfd: syscon: Add Atmel SMC binding doc mfd: syscon: Add atmel-smc registers definition mfd: syscon: Add Atmel Matrix bus DT binding documentation mfd: syscon: Add atmel-matrix registers definition clk: shmobile: fix sparse NULL pointer warning ... |
||
Linus Torvalds
|
878ba61aa9 |
ARM: SoC platform changes
New and updated SoC support. Also included are some cleanups where the platform maintainers hadn't separated cleanups from new developent in separate branches. Some of the larger things worth pointing out: - A large set of changes from Alexandre Belloni and Nicolas Ferre preparing at91 platforms for multiplatform and cleaning up quite a bit in the process. - Removal of CSR's "Marco" SoC platform that never made it out to the market. We love seeing these since it means the vendor published support before product was out, which is exactly what we want! New platforms this release are: - Conexant Digicolor (CX92755 SoC) - Hisilicon HiP01 SoC - CSR/sirf Atlas7 SoC - ST STiH418 SoC - Common code changes for Nvidia Tegra132 (64-bit SoC) We're seeing more and more platforms having a harder time labelling changes as cleanups vs new development -- which is a good sign that we've come quite far on the cleanup effort. So over time we might start combining the cleanup and new-development branches more. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJU4uiiAAoJEIwa5zzehBx3LtoQAIP4eInJAumhB67MexzWGIBx eOsloBRMEBrjBQdSYsdsypN6T61WjDu1aieCxEGzIqitcMa59AIyyzglmlXy3UmV XQuSnIBag2fsOqrvqd+c6ewzAMxm2/Nbi3+zjzApkf27NDlBLhEjxuK6pAAf4Yw9 gyWqB9g0d4V06XdqRInRvyyVfMu6fdApHLnadtjcMdiorQGd1bcOE1sQYygy6N6e d6vGvyKSv4ygyDG9//njzm6C5OnmHliimMToeuDC2Scel69RM97EnMXys988CqUH 0Ru7XANEujtHXSOBYOyCv1kk4V5NguGzlfepe23oidOew8MjUdyRvKrwUiMt3AnT SVqcZ9UU5wjJC6j+iADh+E7zww2H0rA6vFRzXy297dDuLg2C2ONFljBj/tIKGc71 ++gLc6LRn7UmSyK98JMzkxDhmnnPn8w2O0M5GdabAqzZSfHlL1juW9ljp9Al5P6y apLRzqMGjEoyC4huXvB3XVfrxGfepe5pco6wVlwmF3ilwf7iHnfuHONC1aw2mPRO aOKiS+0gHWL3rNZtZQtyW7Ws0I2HJFip2CWIloBK1/2ntEoh51PH7jGw8iu/6jTk //DCXqPBNXcLqonB9CHJZ/EWt0wup0BcHyLjlWX7iEjsdP/QJXrDgnrV3qdHibbh AJASjs0YVDcdvRsRStlg =szd9 -----END PGP SIGNATURE----- Merge tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform changes from Olof Johansson: "New and updated SoC support. Also included are some cleanups where the platform maintainers hadn't separated cleanups from new developent in separate branches. Some of the larger things worth pointing out: - A large set of changes from Alexandre Belloni and Nicolas Ferre preparing at91 platforms for multiplatform and cleaning up quite a bit in the process. - Removal of CSR's "Marco" SoC platform that never made it out to the market. We love seeing these since it means the vendor published support before product was out, which is exactly what we want! New platforms this release are: - Conexant Digicolor (CX92755 SoC) - Hisilicon HiP01 SoC - CSR/sirf Atlas7 SoC - ST STiH418 SoC - Common code changes for Nvidia Tegra132 (64-bit SoC) We're seeing more and more platforms having a harder time labelling changes as cleanups vs new development -- which is a good sign that we've come quite far on the cleanup effort. So over time we might start combining the cleanup and new-development branches more" * tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (124 commits) ARM: at91/trivial: unify functions and machine names ARM: at91: remove at91_dt_initialize and machine init_early() ARM: at91: change board files into SoC files ARM: at91: remove at91_boot_soc ARM: at91: move alternative initial mapping to board-dt-sama5.c ARM: at91: merge all SOC_AT91SAM9xxx ARM: at91: at91rm9200: set idle and restart from rm9200_dt_device_init() ARM: digicolor: select syscon and timer ARM: zynq: Simplify SLCR initialization ARM: zynq: PM: Fixed simple typo. ARM: zynq: Setup default gpio number for Xilinx Zynq ARM: digicolor: add low level debug support ARM: initial support for Conexant Digicolor CX92755 SoC ARM: OMAP2+: Add dm816x hwmod support ARM: OMAP2+: Add clock domain support for dm816x ARM: OMAP2+: Add board-generic.c entry for ti81xx ARM: at91: pm: remove warning to remove SOC_AT91SAM9263 usage ARM: at91: remove unused mach/system_rev.h ARM: at91: stop using HAVE_AT91_DBGUx ARM: at91: fix ordering of SRAM and PM initialization ... |
||
Linus Torvalds
|
ea7531ac4a |
ARM: SoC cleanups
This is a good healthy set of various code removals. Total net delta is 8100 lines removed. Among the larger cleanups are: - Removal of old Samsung S3C DMA infrastructure by Arnd - Removal of the non-DT version of the 'lager' board by Magnus Damm - General stale code removal on OMAP and Davinci by Rickard Strandqvist - Removal of non-DT support on am3517 platforms by Tony Lindgren ... plus several other cleanups of various platforms across the board. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJU4uYeAAoJEIwa5zzehBx3v58P/RGKt5e4CgCdHKjVhbPmADSE FVECT4qrIkf4dFgU5qPCBDCtQn/B3ljxZnq6Hqi8VxYD+pRcXt94R50ZyhGUZ6QF GLXU8jDSlY906uJwW+CHZFVLmDjTM4ONLn1ZMRtcdOrU3yGC5rZq9+Kla6ZIE6jb mUAFMj6e+NBPYDonq93G7968EdyLJOtK4B2ylPW0+wgSRGIEPibCiNi9yyN4hBFr LiaOyY/execKUo2K2BFWkfAZWt7GrwBu/qAkz/9YDRDiikLwFG2UBWbaik5Fj8tf v8wvpL6Af6iLpRx1wI/HoCgjFS/g/n4O3svMe7aHGyfrkEAxNtoCKlFscO8w/aLc eABNAb5j65it8IHvQMR5RhgqWoQe4XMlDcwsxotTe64GfxpTahdhDmhk7RKAY9Xq MyITvtZPTPHTSZHNEDE3HtgHn62ndSinYFhdTaBi2FQxLNCUFl2TKZxpb0r65JI/ 2yOf6hcgWGTgV1VOruAc5SHcSkQOY3SptM4n4F1B0VcDrCphBDYhRTdokELFJIIq I47Week8o0f+a4ot/sf0QhU68wVZENgUJO3/Q5Buta+UGSZa4NYH7Ymc159e7hGS k+7mCeTJC85F0H/EBWvCcZzbpwiq7jBRAY2PhqYF1EQkefdR/+28o1sX090fVaXD n0gXv3/ZDvJB2ryv8lR/ =tsjK -----END PGP SIGNATURE----- Merge tag 'cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC cleanups from Olof Johansson: "This is a good healthy set of various code removals. Total net delta is 8100 lines removed. Among the larger cleanups are: - Removal of old Samsung S3C DMA infrastructure by Arnd - Removal of the non-DT version of the 'lager' board by Magnus Damm - General stale code removal on OMAP and Davinci by Rickard Strandqvist - Removal of non-DT support on am3517 platforms by Tony Lindgren ... plus several other cleanups of various platforms across the board" * tag 'cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (47 commits) ARM: sirf: drop redundant function and marco declaration arm: omap: specify PMUs are for ARMv7 CPUs arm: shmobile: specify PMUs are for ARMv7 CPUs arm: iop: specify PMUs are for XScale CPUs arm: pxa: specify PMUs are for XScale CPUs arm: realview: specify PMU types ARM: SAMSUNG: remove unused DMA infrastructure ARM: OMAP3: Add back Kconfig option MACH_OMAP3517EVM for ASoC ARM: davinci: Remove CDCE949 driver ARM: at91: remove useless at91rm9200_set_type() ARM: at91: remove useless at91rm9200_dt_initialize() ARM: at91: move debug-macro.S into the common space ARM: at91: remove useless at91_sysirq_mask_rtx ARM: at91: remove useless config MACH_AT91SAM9_DT ARM: at91: remove useless config MACH_AT91RM9200_DT ARM: at91: remove unused mach/memory.h ARM: at91: remove useless header file includes ARM: at91: remove unneeded header file rtc: at91/Kconfig: remove useless options ARM: at91/Documentation: add a README for Atmel SoCs ... |
||
Mark Rutland
|
744503b35a |
arm: shmobile: specify PMUs are for ARMv7 CPUs
Now that we can specify which PMU variant we're likely to deal with, do so in the shmobile board code. This will allow us to split the ARMv6, ARMv7, and XScale PMU drivers Signed-off-by: Mark Rutland <mark.rutland@arm.com> Tested-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Simon Horman <horms+renesas@verge.net.au> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Olof Johansson <olof@lixom.net> Signed-off-by: Olof Johansson <olof@lixom.net> |
||
Olof Johansson
|
28111dda37 |
Third Round of Renesas ARM Based SoC Fixes for v3.19
* Instantiate GIC from C board code in legacy builds on r8a7790 and r8a73a4 -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJUytABAAoJENfPZGlqN0++qrkP/R2n+rHBNvZTW4p88IZcZ37O 7zRXCkcXLHHVfKp8XHEMrhH/Pc7uIonWgq3SIKHDlK9UwAvfOdLPj2CMGm7bN+Ea +fgT6Qe1UP9kgbsH1whovsR3CzjLDqxmlhfjTkrmu5UjFNGQuv/iFVkkzViSCDYd YkSIYxybAlH3Nd7xxNFG54LzjCPauY2V76JM76/3j24m+zxZverY8sN46PtKryGg /toQzuVeimpz4BtObXZAi7Y7eWvvYUtELGshTTGKBmtRhLWGZDrS+60KpMDVoKtK f135X2taKm2jIiKPXCPMQTOWsXBls1TuxIGssiIysPU6t5OCSuNd/M1RiKDhZhE3 J4L4vCMq/Gn2XbYe2+O0PNkLxuWepSZ4VRzALZCPhP48CYGrazP63JWTnjROcC61 5bxuUtWMUVHF52hEWf6bXEiAEBNZP7u8kBc02drsscQHM/N3SiFcIxK/nGlIVMjy Qt01fYR+zZZ2v5OhQHeEe7lBfUMnKA9+QLHR4dJ32oJvyAFiDImLsrEBiVlTDk47 gYJXmqGp2GWgB1H2mDiopHg+ERsavK9P7FL9juYG3OdvFPFuQwktJDSpN+Y0GZMV wRADV2/ylZBw48DidX86TD3gwtV7gP995nHvQJ2nv+/Kjq58uR4AHwn0wVHPldCE cDf5IYwdvD0a42id6zb5 =/Oq9 -----END PGP SIGNATURE----- Merge tag 'renesas-soc-fixes3-for-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into fixes Merge "Third Round of Renesas ARM Based SoC Fixes for v3.19" from Simon Horman: * Instantiate GIC from C board code in legacy builds on r8a7790 and r8a73a4 * tag 'renesas-soc-fixes3-for-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: ARM: shmobile: r8a7790: Instantiate GIC from C board code in legacy builds ARM: shmobile: r8a73a4: Instantiate GIC from C board code in legacy builds Signed-off-by: Olof Johansson <olof@lixom.net> |
||
Magnus Damm
|
77cf5166f2 |
ARM: shmobile: r8a7790: Instantiate GIC from C board code in legacy builds
As of commit
|
||
Magnus Damm
|
974b072f71 |
ARM: shmobile: r8a73a4: Instantiate GIC from C board code in legacy builds
As of commit
|
||
Olof Johansson
|
604beee864 |
Second Round of Renesas ARM Based SoC Fixes for v3.19
* Instantiate GIC from C board code in legacy builds on r8a7778 and r8a7779 -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJUvax/AAoJENfPZGlqN0++7d4P/ic/OC82lPZuhmqCzdE03ptb 8wvQNiQdHHA1q1hVZPC4cVGDqIymv9Si5q8AliPT5hqT2iSZIUjlTPe4WO350zSl qZZoAM4Qk6DzxFNw6I/+j7HcR9NEzCBpfCEkNH7peXzmrlGnAdBPKY0Lw9wf47a/ uh4xwaKsi7583AN2m1NB9jYESUNXyP/lWEsA+goUqIZTudJLpcvML6y96nHJ9JEv 5MXFAwVVDJ+huz6Q8hG3ImviUihiIWX25oQ2pmhFczPIf+RDHWDMhQd5Xp/5VBVn +3ckUFjXgzhYp5BvPvFhrU46nHolGALDbEIOGgMZwM8GRIA9ffAttK3j4Du1ixa3 XDrNCbfOCeXfRAr+HcTHdwUtKcJxVz9oVZmlOMzc6yZfrAR0Y5dz3M8iUa2tqFqK +DUGstqm26rSwDVGkY7vElRz5nnQhb0/yWpUrO2Augsh04e28V5SkFiIHRFWJ/uT 53h8qbqyDChw9ZVqg0Na01N0aVRa5a1XpYqtAEs+ta+y3/A35NVBToXhVh3aOQUt qAdFrwykyR32bMR0vUg8XVLm2rcaV87D6MDKGElKlkTxPoDK9+RPzfiu0sK4fmfV TULb9izepRRfJLDWTeDJm3uxbt1qaOVc1ry24R4HvDsC48BmfuZEVedIn9+Mp+SW xhrHiW1bUa3NL/p2BuPX =Mb4f -----END PGP SIGNATURE----- Merge tag 'renesas-soc-fixes2-for-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into fixes Merge "Second Round of Renesas ARM Based SoC Fixes for v3.19" from Simon Horman: * Instantiate GIC from C board code in legacy builds on r8a7778 and r8a7779 * tag 'renesas-soc-fixes2-for-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: ARM: shmobile: r8a7779: Instantiate GIC from C board code in legacy builds ARM: shmobile: r8a7778: Instantiate GIC from C board code in legacy builds Signed-off-by: Olof Johansson <olof@lixom.net> |
||
Olof Johansson
|
a30e93186c |
Merge tag 'renesas-soc-fixes-for-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into fixes
Merge "Renesas ARM Based SoC Fixes for v3.19" from Simon Horman:
Renesas ARM Based SoC Fixes for v3.19
This pull request is based on the last round of SoC updates for v3.19,
Fourth Round of Renesas ARM Based SoC Updates for v3.19, tagged as
renesas-soc3-for-v3.19, merged into your next/soc branch and included in
v3.19-rc1.
- ARM: shmobile: r8a7740: Instantiate GIC from C board code in legacy builds
Set .control_parent for all irqpin instances for sh73a0 SoC when booting
using legacy C.
- ARM: shmobile: r8a7740: Instantiate GIC from C board code in legacy builds
This fixes a long standing problem which has been present since
the sh73a0 SoC started using the INTC External IRQ pin driver.
The patch that introduced the problem is
|
||
Magnus Damm
|
f469cde20a |
ARM: shmobile: r8a7779: Instantiate GIC from C board code in legacy builds
As of commit
|
||
Magnus Damm
|
1fbbc3f0c5 |
ARM: shmobile: r8a7778: Instantiate GIC from C board code in legacy builds
As of commit
|
||
Geert Uytterhoeven
|
1632ff162f |
ARM: shmobile: R-Mobile: Special-case PM domains with memory-controllers
Add a special case for PM domains containing a memory-controller. Such a PM domain must not be turned off if memory is in use. On sh73a0 PM domains A4BC0 and A4BC1 each contain an SDRAM Bus State Controller (SBSC). On r8a73a4 PM domain A3BC contains two DDR Bus Controllers (DBSC). In both cases, there are no other devices in these PM domains, so they were eligible for power down, crashing the system. On r8a7740 the DDR3 Bus State Controller (DBSC3) is located in A4S, whose child domain A3SM contains the CPU core. Hence A4S is never turned off, and no crash happened. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> |
||
Geert Uytterhoeven
|
60e2643562 |
ARM: shmobile: R-Mobile: Generalize adding/looking up special PM domains
Make adding special PM domains to an array, and looking them up later, more generic, so it can be used for all special hardware blocks. The type of PM domain is also stored, so rmobile_setup_pm_domain() can use a switch() statement instead of a chain of if/else statements. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> |
||
Geert Uytterhoeven
|
e43ee86efb |
ARM: shmobile: R-Mobile: Consolidate rmobile_pd_suspend_*()
Consolidate the identical rmobile_pd_suspend_*() routines that just return -EBUSY to prevent a PM domain from being powered down into a single rmobile_pd_suspend_busy(). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> |
||
Geert Uytterhoeven
|
2173fc7cb6 |
ARM: shmobile: R-Mobile: Add DT support for PM domains
Populate the PM domains from DT, and provide support to hook up devices to their respective PM domain. The always-on power area (e.g. C5 on r8a7740) is created as a PM domain without software control, to allow Run-Time management of module clocks for hardware blocks inside this area. Special cases like PM domains containing CPUs, the console device, or Coresight-ETM, are handled by scanning the DT topology. As long as the ARM debug/perf code doesn't use resource management with runtime PM support, the power area containing Coresight-ETM (e.g. D4 on r8a7740) must be kept powered to avoid a crash during resume from s2ram (dbg_cpu_pm_notify() calls reset_ctrl_regs() unconditionally, causing an undefined instruction oops). Initialization is done from core_initcall(), as the "renesas,intc-irqpin" driver uses postcore_initcall(). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> |
||
Geert Uytterhoeven
|
25717b8573 |
ARM: shmobile: R-Mobile: Store SYSC base address in rmobile_pm_domain
Replace the hardcoded addresses for accessing the SYSC PM domain registers by register offsets, relative to the SYSC base address stored in struct rmobile_pm_domain. In the future, the SYSC base address will come from DT. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> |
||
Geert Uytterhoeven
|
4b9d62e02a |
ARM: shmobile: R-Mobile: Use generic_pm_domain.attach_dev() for pm_clk setup
Use the just introduced genpd attach/detach callbacks to register the devices' module clocks, instead of doing it directly, to make it DT-proof. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> |
||
Geert Uytterhoeven
|
b0ddb319db |
ARM: shmobile: sh73a0 legacy: Set .control_parent for all irqpin instances
The sh73a0 INTC can't mask interrupts properly most likely due to a
hardware bug. Set the .control_parent flag to delegate masking to the
parent interrupt controller, like was already done for irqpin1.
Without this, accessing the three-axis digital accelerometer ADXL345
on kzm9g through /dev/input/event1 causes an interrupt storm, which
requires a power-cycle to recover from.
This was inspired by a patch for arch/arm/boot/dts/sh73a0.dtsi from
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Fixes:
|
||
Ulrich Hecht
|
39695882d3 |
ARM: shmobile: r8a73a4: Multiplatform support
Enable r8a73a4 Multiplatform support for the generic r8a73a4 machine vector. Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com> Acked-by: Magnus Damm <damm+renesas@opensource.se> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> |
||
Magnus Damm
|
1dc13eee3a |
ARM: shmobile: r8a7779: No TWD setup in C for Multiplatform
Skip the TWD setup in C for r8a7779 Multiplatform. We should use DTS for the TWD device anyway. Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> |
||
Magnus Damm
|
95abc9de78 |
ARM: shmobile: Fix is_e2 warning
Fix "is_e2" warning introduced by:
|
||
Geert Uytterhoeven
|
2f472ae6b1 |
ARM: shmobile: sh73a0 legacy/reference: Add missing INTCA0 clock for irqpin module
This clock drives the irqpin controller modules. Before, it was assumed enabled by the bootloader or reset state. By making it available to the driver, we make sure it gets enabled when needed, and allow it to be managed by system or runtime PM. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> |
||
Ulrich Hecht
|
09bd745b55 |
ARM: shmobile: sh73a0: disable legacy clock initialization
Disables sh73a0_clock_init() if CCF is enabled. Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> |
||
Laurent Pinchart
|
e042681894 |
ARM: shmobile: r8a7790: Remove legacy code
All r8a7790 boards are now used with multiplatform kernels only. We can remove all the unused r8a7790 legacy device and clock registration code. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> |
||
Magnus Damm
|
a483dcbfa2 |
ARM: shmobile: lager: Remove legacy board support
Lager legacy support level is same as the DT case so remove the legacy code and force people to move over to using Multiplatform and DT. Signed-off-by: Magnus Damm <damm+renesas@opensource.se> [Remove lager_defconfig and don't build the dtb for legacy kernels] Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> |
||
Magnus Damm
|
be2902416c |
ARM: shmobile: lager-reference: DTS-only board support
Remove redundant C board code for Lager Multiplatform, everything is supported via DT these days anyway so it is fine to rely on the MACHINE_START in setup-r8a7790.c. Signed-off-by: Magnus Damm <damm+renesas@opensource.se> [Remove CONFIG_MACH_LAGER from shmobile_defconfig] Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> |
||
Geert Uytterhoeven
|
d034f53cc6 |
ARM: shmobile: r8a7740: Instantiate GIC from C board code in legacy builds
As of commit
|
||
Linus Torvalds
|
988adfdffd |
Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linux
Pull drm updates from Dave Airlie: "Highlights: - AMD KFD driver merge This is the AMD HSA interface for exposing a lowlevel interface for GPGPU use. They have an open source userspace built on top of this interface, and the code looks as good as it was going to get out of tree. - Initial atomic modesetting work The need for an atomic modesetting interface to allow userspace to try and send a complete set of modesetting state to the driver has arisen, and been suffering from neglect this past year. No more, the start of the common code and changes for msm driver to use it are in this tree. Ongoing work to get the userspace ioctl finished and the code clean will probably wait until next kernel. - DisplayID 1.3 and tiled monitor exposed to userspace. Tiled monitor property is now exposed for userspace to make use of. - Rockchip drm driver merged. - imx gpu driver moved out of staging Other stuff: - core: panel - MIPI DSI + new panels. expose suggested x/y properties for virtual GPUs - i915: Initial Skylake (SKL) support gen3/4 reset work start of dri1/ums removal infoframe tracking fixes for lots of things. - nouveau: tegra k1 voltage support GM204 modesetting support GT21x memory reclocking work - radeon: CI dpm fixes GPUVM improvements Initial DPM fan control - rcar-du: HDMI support added removed some support for old boards slave encoder driver for Analog Devices adv7511 - exynos: Exynos4415 SoC support - msm: a4xx gpu support atomic helper conversion - tegra: iommu support universal plane support ganged-mode DSI support - sti: HDMI i2c improvements - vmwgfx: some late fixes. - qxl: use suggested x/y properties" * 'drm-next' of git://people.freedesktop.org/~airlied/linux: (969 commits) drm: sti: fix module compilation issue drm/i915: save/restore GMBUS freq across suspend/resume on gen4 drm: sti: correctly cleanup CRTC and planes drm: sti: add HQVDP plane drm: sti: add cursor plane drm: sti: enable auxiliary CRTC drm: sti: fix delay in VTG programming drm: sti: prepare sti_tvout to support auxiliary crtc drm: sti: use drm_crtc_vblank_{on/off} instead of drm_vblank_{on/off} drm: sti: fix hdmi avi infoframe drm: sti: remove event lock while disabling vblank drm: sti: simplify gdp code drm: sti: clear all mixer control drm: sti: remove gpio for HDMI hot plug detection drm: sti: allow to change hdmi ddc i2c adapter drm/doc: Document drm_add_modes_noedid() usage drm/i915: Remove '& 0xffff' from the mask given to WA_REG() drm/i915: Invert the mask and val arguments in wa_add() and WA_REG() drm: Zero out DRM object memory upon cleanup drm/i915/bdw: Fix the write setting up the WIZ hashing mode ... |
||
Linus Torvalds
|
2183a58803 |
media updates for v3.19-rc1
-----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJUhxhbAAoJEAhfPr2O5OEV4JwP/2I7D2KGz5tdNGDAh1H8+swR hoj3tX7HLhwBmF6XIUlMYbk5L/ClDace6kcjT6OjwJ9SktrrKks6ZSsYsBjCIyOC yS7xNQArUKzWk4vV+uJVAvtF8V57LLFul8dhHk0JJwAxrkWnPvDdfJNs4PhUAkgn 1i0PPshNo5Ow/+4YMiOjEDR+q9TMSUUzaq5zkPF7AFCnykuJ1wUJwUE0qjTfGi+4 gl1yMye0TEawTYSM8h/+Lh7wosNFZYcXg85r04A6a8h6GLgg0h6KSOJjyPITmQ+j hLdtyiYs8a6XT+Y8o416zxpbSozo7KXCUTtet/N5g+lgQMqZqSd9WxE52SOY+kfd UVeob0VfWR0xdDzaJp5rLQ/MQ16RTHaHppgUidFxxGe9D5f9JM/88I0OfwNzl4uO cv2cyeNktHH6bcjfOGqxSVmZWgAm6q6qU7MN07PoN+5TcUlYTAOi1WLE5K+7HGgw CxzOZ61oxi/OO1FapaVoipq6ycjltTql2kbcARvmrRrbge0ocAqHxHqFyUbDDhNw Wn/O6VzLfpW0vGTacC6+xcUSpIhwajJ80UJAOqJP8sw0Xtmian5Lcs6gVzxwkOdU 36Po4RRGFqsG6Sq3HR+toNwKt/nHNEFkJwYcNFHdvBiXTEYYkMe6MccUxxb3i/iI KxB1s51zVy9t3PqjP+3J =i7gx -----END PGP SIGNATURE----- Merge tag 'media/v3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - Two new dvb frontend drivers: mn88472 and mn88473 - A new driver for some PCIe DVBSky cards - A new remote controller driver: meson-ir - One LIRC staging driver got rewritten and promoted to mainstream: igorplugusb - A new tuner driver (m88rs6000t) - The old omap2 media driver got removed from staging. This driver uses an old DMA API and it is likely broken on recent kernels. Nobody cared enough to fix it - Media bus format moved to a separate header, as DRM will also use the definitions there - mem2mem_testdev were renamed to vim2m, in order to use the same naming convention taken by the other virtual test driver (vivid) - Added a new driver for coda SoC (coda-jpeg) - The cx88 driver got converted to use videobuf2 core - Make DMABUF export buffer to work with DMA Scatter/Gather and Vmalloc cores - Lots of other fixes, improvements and cleanups on the drivers. * tag 'media/v3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (384 commits) [media] mn88473: One function call less in mn88473_init() after error [media] mn88473: Remove uneeded check before release_firmware() [media] lirc_zilog: Deletion of unnecessary checks before vfree() [media] MAINTAINERS: Add myself as img-ir maintainer [media] img-ir: Don't set driver's module owner [media] img-ir: Depend on METAG or MIPS or COMPILE_TEST [media] img-ir/hw: Drop [un]register_decoder declarations [media] img-ir/hw: Fix potential deadlock stopping timer [media] img-ir/hw: Always read data to clear buffer [media] redrat3: ensure dma is setup properly [media] ddbridge: remove unneeded check before dvb_unregister_device() [media] si2157: One function call less in si2157_init() after error [media] tuners: remove uneeded checks before release_firmware() [media] arm: omap2: rx51-peripherals: fix build warning [media] stv090x: add an extra protetion against buffer overflow [media] stv090x: Remove an unreachable code [media] stv090x: Some whitespace cleanups [media] em28xx: checkpatch cleanup: whitespaces/new lines cleanups [media] si2168: add support for firmware files in new format [media] si2168: debug printout for firmware version ... |
||
Linus Torvalds
|
92a578b064 |
ACPI and power management updates for 3.19-rc1
This time we have some more new material than we used to have during the last couple of development cycles. The most important part of it to me is the introduction of a unified interface for accessing device properties provided by platform firmware. It works with Device Trees and ACPI in a uniform way and drivers using it need not worry about where the properties come from as long as the platform firmware (either DT or ACPI) makes them available. It covers both devices and "bare" device node objects without struct device representation as that turns out to be necessary in some cases. This has been in the works for quite a few months (and development cycles) and has been approved by all of the relevant maintainers. On top of that, some drivers are switched over to the new interface (at25, leds-gpio, gpio_keys_polled) and some additional changes are made to the core GPIO subsystem to allow device drivers to manipulate GPIOs in the "canonical" way on platforms that provide GPIO information in their ACPI tables, but don't assign names to GPIO lines (in which case the driver needs to do that on the basis of what it knows about the device in question). That also has been approved by the GPIO core maintainers and the rfkill driver is now going to use it. Second is support for hardware P-states in the intel_pstate driver. It uses CPUID to detect whether or not the feature is supported by the processor in which case it will be enabled by default. However, it can be disabled entirely from the kernel command line if necessary. Next is support for a platform firmware interface based on ACPI operation regions used by the PMIC (Power Management Integrated Circuit) chips on the Intel Baytrail-T and Baytrail-T-CR platforms. That interface is used for manipulating power resources and for thermal management: sensor temperature reporting, trip point setting and so on. Also the ACPI core is now going to support the _DEP configuration information in a limited way. Basically, _DEP it supposed to reflect off-the-hierarchy dependencies between devices which may be very indirect, like when AML for one device accesses locations in an operation region handled by another device's driver (usually, the device depended on this way is a serial bus or GPIO controller). The support added this time is sufficient to make the ACPI battery driver work on Asus T100A, but it is general enough to be able to cover some other use cases in the future. Finally, we have a new cpufreq driver for the Loongson1B processor. In addition to the above, there are fixes and cleanups all over the place as usual and a traditional ACPICA update to a recent upstream release. As far as the fixes go, the ACPI LPSS (Low-power Subsystem) driver for Intel platforms should be able to handle power management of the DMA engine correctly, the cpufreq-dt driver should interact with the thermal subsystem in a better way and the ACPI backlight driver should handle some more corner cases, among other things. On top of the ACPICA update there are fixes for race conditions in the ACPICA's interrupt handling code which might lead to some random and strange looking failures on some systems. In the cleanups department the most visible part is the series of commits targeted at getting rid of the CONFIG_PM_RUNTIME configuration option. That was triggered by a discussion regarding the generic power domains code during which we realized that trying to support certain combinations of PM config options was painful and not really worth it, because nobody would use them in production anyway. For this reason, we decided to make CONFIG_PM_SLEEP select CONFIG_PM_RUNTIME and that lead to the conclusion that the latter became redundant and CONFIG_PM could be used instead of it. The material here makes that replacement in a major part of the tree, but there will be at least one more batch of that in the second part of the merge window. Specifics: - Support for retrieving device properties information from ACPI _DSD device configuration objects and a unified device properties interface for device drivers (and subsystems) on top of that. As stated above, this works with Device Trees and ACPI and allows device drivers to be written in a platform firmware (DT or ACPI) agnostic way. The at25, leds-gpio and gpio_keys_polled drivers are now going to use this new interface and the GPIO subsystem is additionally modified to allow device drivers to assign names to GPIO resources returned by ACPI _CRS objects (in case _DSD is not present or does not provide the expected data). The changes in this set are mostly from Mika Westerberg, Rafael J Wysocki, Aaron Lu, and Darren Hart with some fixes from others (Fabio Estevam, Geert Uytterhoeven). - Support for Hardware Managed Performance States (HWP) as described in Volume 3, section 14.4, of the Intel SDM in the intel_pstate driver. CPUID is used to detect whether or not the feature is supported by the processor. If supported, it will be enabled automatically unless the intel_pstate=no_hwp switch is present in the kernel command line. From Dirk Brandewie. - New Intel Broadwell-H ID for intel_pstate (Dirk Brandewie). - Support for firmware interface based on ACPI operation regions used by the PMIC chips on the Intel Baytrail-T and Baytrail-T-CR platforms for power resource control and thermal management (Aaron Lu). - Limited support for retrieving off-the-hierarchy dependencies between devices from ACPI _DEP device configuration objects and deferred probing support for the ACPI battery driver based on the _DEP information to make that driver work on Asus T100A (Lan Tianyu). - New cpufreq driver for the Loongson1B processor (Kelvin Cheung). - ACPICA update to upstream revision 20141107 which only affects tools (Bob Moore). - Fixes for race conditions in the ACPICA's interrupt handling code and in the ACPI code related to system suspend and resume (Lv Zheng and Rafael J Wysocki). - ACPI core fix for an RCU-related issue in the ioremap() regions management code that slowed down significantly after CPUs had been allowed to enter idle states even if they'd had RCU callbakcs queued and triggered some problems in certain proprietary graphics driver (and elsewhere). The fix replaces synchronize_rcu() in that code with synchronize_rcu_expedited() which makes the issue go away. From Konstantin Khlebnikov. - ACPI LPSS (Low-Power Subsystem) driver fix to handle power management of the DMA engine included into the LPSS correctly. The problem is that the DMA engine doesn't have ACPI PM support of its own and it simply is turned off when the last LPSS device having ACPI PM support goes into D3cold. To work around that, the PM domain used by the ACPI LPSS driver is redesigned so at least one device with ACPI PM support will be on as long as the DMA engine is in use. From Andy Shevchenko. - ACPI backlight driver fix to avoid using it on "Win8-compatible" systems where it doesn't work and where it was used by default by mistake (Aaron Lu). - Assorted minor ACPI core fixes and cleanups from Tomasz Nowicki, Sudeep Holla, Huang Rui, Hanjun Guo, Fabian Frederick, and Ashwin Chaugule (mostly related to the upcoming ARM64 support). - Intel RAPL (Running Average Power Limit) power capping driver fixes and improvements including new processor IDs (Jacob Pan). - Generic power domains modification to power up domains after attaching devices to them to meet the expectations of device drivers and bus types assuming devices to be accessible at probe time (Ulf Hansson). - Preliminary support for controlling device clocks from the generic power domains core code and modifications of the ARM/shmobile platform to use that feature (Ulf Hansson). - Assorted minor fixes and cleanups of the generic power domains core code (Ulf Hansson, Geert Uytterhoeven). - Assorted minor fixes and cleanups of the device clocks control code in the PM core (Geert Uytterhoeven, Grygorii Strashko). - Consolidation of device power management Kconfig options by making CONFIG_PM_SLEEP select CONFIG_PM_RUNTIME and removing the latter which is now redundant (Rafael J Wysocki and Kevin Hilman). That is the first batch of the changes needed for this purpose. - Core device runtime power management support code cleanup related to the execution of callbacks (Andrzej Hajda). - cpuidle ARM support improvements (Lorenzo Pieralisi). - cpuidle cleanup related to the CPUIDLE_FLAG_TIME_VALID flag and a new MAINTAINERS entry for ARM Exynos cpuidle (Daniel Lezcano and Bartlomiej Zolnierkiewicz). - New cpufreq driver callback (->ready) to be executed when the cpufreq core is ready to use a given policy object and cpufreq-dt driver modification to use that callback for cooling device registration (Viresh Kumar). - cpufreq core fixes and cleanups (Viresh Kumar, Vince Hsu, James Geboski, Tomeu Vizoso). - Assorted fixes and cleanups in the cpufreq-pcc, intel_pstate, cpufreq-dt, pxa2xx cpufreq drivers (Lenny Szubowicz, Ethan Zhao, Stefan Wahren, Petr Cvek). - OPP (Operating Performance Points) framework modification to allow OPPs to be removed too and update of a few cpufreq drivers (cpufreq-dt, exynos5440, imx6q, cpufreq) to remove OPPs (added during initialization) on driver removal (Viresh Kumar). - Hibernation core fixes and cleanups (Tina Ruchandani and Markus Elfring). - PM Kconfig fix related to CPU power management (Pankaj Dubey). - cpupower tool fix (Prarit Bhargava). / -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.22 (GNU/Linux) iQIcBAABCAAGBQJUhj6JAAoJEILEb/54YlRxTM4P/j5g5SfqvY0QKsn7sR7MGZ6v nsgCBhJAqTw3ocNC7EAs8z9h2GWy1KbKpakKYWAh9Fs1yZoey7tFSlcv/Rgjlp70 uU5sDQHtpE9mHKiymdsowiQuWgpl962L4k+k8hUslhlvgk1PvVbpajR6OqG8G+pD asuIW9eh1APNkLyXmRJ3ZPomzs0VmRdZJ0NEs0lKX9mJskqEvxPIwdaxq3iaJq9B Fo0J345zUDcJnxWblDRdHlOigCimglElfN5qJwaC4KpwUKuBvLRKbp4f69+wfT0c kYFiR29X5KjJ2kLfP/wKsLyuDCYYXRq3tCia5M1tAqOjZ+UA89H/GDftx/5lntmv qUlBa35VfdS1SX4HyApZitOHiLgo+It/hl8Z9bJnhyVw66NxmMQ8JYN2imb8Lhqh XCLR7BxLTah82AapLJuQ0ZDHPzZqMPG2veC2vAzRMYzVijict/p4Y2+qBqONltER 4rs9uRVn+hamX33lCLg8BEN8zqlnT3rJFIgGaKjq/wXHAU/zpE9CjOrKMQcAg9+s t51XMNPwypHMAYyGVhEL89ImjXnXxBkLRuquhlmEpvQchIhR+mR3dLsarGn7da44 WPIQJXzcsojXczcwwfqsJCR4I1FTFyQIW+UNh02GkDRgRovQqo+Jk762U7vQwqH+ LBdhvVaS1VW4v+FWXEoZ =5dox -----END PGP SIGNATURE----- Merge tag 'pm+acpi-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI and power management updates from Rafael Wysocki: "This time we have some more new material than we used to have during the last couple of development cycles. The most important part of it to me is the introduction of a unified interface for accessing device properties provided by platform firmware. It works with Device Trees and ACPI in a uniform way and drivers using it need not worry about where the properties come from as long as the platform firmware (either DT or ACPI) makes them available. It covers both devices and "bare" device node objects without struct device representation as that turns out to be necessary in some cases. This has been in the works for quite a few months (and development cycles) and has been approved by all of the relevant maintainers. On top of that, some drivers are switched over to the new interface (at25, leds-gpio, gpio_keys_polled) and some additional changes are made to the core GPIO subsystem to allow device drivers to manipulate GPIOs in the "canonical" way on platforms that provide GPIO information in their ACPI tables, but don't assign names to GPIO lines (in which case the driver needs to do that on the basis of what it knows about the device in question). That also has been approved by the GPIO core maintainers and the rfkill driver is now going to use it. Second is support for hardware P-states in the intel_pstate driver. It uses CPUID to detect whether or not the feature is supported by the processor in which case it will be enabled by default. However, it can be disabled entirely from the kernel command line if necessary. Next is support for a platform firmware interface based on ACPI operation regions used by the PMIC (Power Management Integrated Circuit) chips on the Intel Baytrail-T and Baytrail-T-CR platforms. That interface is used for manipulating power resources and for thermal management: sensor temperature reporting, trip point setting and so on. Also the ACPI core is now going to support the _DEP configuration information in a limited way. Basically, _DEP it supposed to reflect off-the-hierarchy dependencies between devices which may be very indirect, like when AML for one device accesses locations in an operation region handled by another device's driver (usually, the device depended on this way is a serial bus or GPIO controller). The support added this time is sufficient to make the ACPI battery driver work on Asus T100A, but it is general enough to be able to cover some other use cases in the future. Finally, we have a new cpufreq driver for the Loongson1B processor. In addition to the above, there are fixes and cleanups all over the place as usual and a traditional ACPICA update to a recent upstream release. As far as the fixes go, the ACPI LPSS (Low-power Subsystem) driver for Intel platforms should be able to handle power management of the DMA engine correctly, the cpufreq-dt driver should interact with the thermal subsystem in a better way and the ACPI backlight driver should handle some more corner cases, among other things. On top of the ACPICA update there are fixes for race conditions in the ACPICA's interrupt handling code which might lead to some random and strange looking failures on some systems. In the cleanups department the most visible part is the series of commits targeted at getting rid of the CONFIG_PM_RUNTIME configuration option. That was triggered by a discussion regarding the generic power domains code during which we realized that trying to support certain combinations of PM config options was painful and not really worth it, because nobody would use them in production anyway. For this reason, we decided to make CONFIG_PM_SLEEP select CONFIG_PM_RUNTIME and that lead to the conclusion that the latter became redundant and CONFIG_PM could be used instead of it. The material here makes that replacement in a major part of the tree, but there will be at least one more batch of that in the second part of the merge window. Specifics: - Support for retrieving device properties information from ACPI _DSD device configuration objects and a unified device properties interface for device drivers (and subsystems) on top of that. As stated above, this works with Device Trees and ACPI and allows device drivers to be written in a platform firmware (DT or ACPI) agnostic way. The at25, leds-gpio and gpio_keys_polled drivers are now going to use this new interface and the GPIO subsystem is additionally modified to allow device drivers to assign names to GPIO resources returned by ACPI _CRS objects (in case _DSD is not present or does not provide the expected data). The changes in this set are mostly from Mika Westerberg, Rafael J Wysocki, Aaron Lu, and Darren Hart with some fixes from others (Fabio Estevam, Geert Uytterhoeven). - Support for Hardware Managed Performance States (HWP) as described in Volume 3, section 14.4, of the Intel SDM in the intel_pstate driver. CPUID is used to detect whether or not the feature is supported by the processor. If supported, it will be enabled automatically unless the intel_pstate=no_hwp switch is present in the kernel command line. From Dirk Brandewie. - New Intel Broadwell-H ID for intel_pstate (Dirk Brandewie). - Support for firmware interface based on ACPI operation regions used by the PMIC chips on the Intel Baytrail-T and Baytrail-T-CR platforms for power resource control and thermal management (Aaron Lu). - Limited support for retrieving off-the-hierarchy dependencies between devices from ACPI _DEP device configuration objects and deferred probing support for the ACPI battery driver based on the _DEP information to make that driver work on Asus T100A (Lan Tianyu). - New cpufreq driver for the Loongson1B processor (Kelvin Cheung). - ACPICA update to upstream revision 20141107 which only affects tools (Bob Moore). - Fixes for race conditions in the ACPICA's interrupt handling code and in the ACPI code related to system suspend and resume (Lv Zheng and Rafael J Wysocki). - ACPI core fix for an RCU-related issue in the ioremap() regions management code that slowed down significantly after CPUs had been allowed to enter idle states even if they'd had RCU callbakcs queued and triggered some problems in certain proprietary graphics driver (and elsewhere). The fix replaces synchronize_rcu() in that code with synchronize_rcu_expedited() which makes the issue go away. From Konstantin Khlebnikov. - ACPI LPSS (Low-Power Subsystem) driver fix to handle power management of the DMA engine included into the LPSS correctly. The problem is that the DMA engine doesn't have ACPI PM support of its own and it simply is turned off when the last LPSS device having ACPI PM support goes into D3cold. To work around that, the PM domain used by the ACPI LPSS driver is redesigned so at least one device with ACPI PM support will be on as long as the DMA engine is in use. From Andy Shevchenko. - ACPI backlight driver fix to avoid using it on "Win8-compatible" systems where it doesn't work and where it was used by default by mistake (Aaron Lu). - Assorted minor ACPI core fixes and cleanups from Tomasz Nowicki, Sudeep Holla, Huang Rui, Hanjun Guo, Fabian Frederick, and Ashwin Chaugule (mostly related to the upcoming ARM64 support). - Intel RAPL (Running Average Power Limit) power capping driver fixes and improvements including new processor IDs (Jacob Pan). - Generic power domains modification to power up domains after attaching devices to them to meet the expectations of device drivers and bus types assuming devices to be accessible at probe time (Ulf Hansson). - Preliminary support for controlling device clocks from the generic power domains core code and modifications of the ARM/shmobile platform to use that feature (Ulf Hansson). - Assorted minor fixes and cleanups of the generic power domains core code (Ulf Hansson, Geert Uytterhoeven). - Assorted minor fixes and cleanups of the device clocks control code in the PM core (Geert Uytterhoeven, Grygorii Strashko). - Consolidation of device power management Kconfig options by making CONFIG_PM_SLEEP select CONFIG_PM_RUNTIME and removing the latter which is now redundant (Rafael J Wysocki and Kevin Hilman). That is the first batch of the changes needed for this purpose. - Core device runtime power management support code cleanup related to the execution of callbacks (Andrzej Hajda). - cpuidle ARM support improvements (Lorenzo Pieralisi). - cpuidle cleanup related to the CPUIDLE_FLAG_TIME_VALID flag and a new MAINTAINERS entry for ARM Exynos cpuidle (Daniel Lezcano and Bartlomiej Zolnierkiewicz). - New cpufreq driver callback (->ready) to be executed when the cpufreq core is ready to use a given policy object and cpufreq-dt driver modification to use that callback for cooling device registration (Viresh Kumar). - cpufreq core fixes and cleanups (Viresh Kumar, Vince Hsu, James Geboski, Tomeu Vizoso). - Assorted fixes and cleanups in the cpufreq-pcc, intel_pstate, cpufreq-dt, pxa2xx cpufreq drivers (Lenny Szubowicz, Ethan Zhao, Stefan Wahren, Petr Cvek). - OPP (Operating Performance Points) framework modification to allow OPPs to be removed too and update of a few cpufreq drivers (cpufreq-dt, exynos5440, imx6q, cpufreq) to remove OPPs (added during initialization) on driver removal (Viresh Kumar). - Hibernation core fixes and cleanups (Tina Ruchandani and Markus Elfring). - PM Kconfig fix related to CPU power management (Pankaj Dubey). - cpupower tool fix (Prarit Bhargava)" * tag 'pm+acpi-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (120 commits) i2c-omap / PM: Drop CONFIG_PM_RUNTIME from i2c-omap.c dmaengine / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM tools: cpupower: fix return checks for sysfs_get_idlestate_count() drivers: sh / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM e1000e / igb / PM: Eliminate CONFIG_PM_RUNTIME MMC / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM MFD / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM misc / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM media / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM input / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM leds: leds-gpio: Fix multiple instances registration without 'label' property iio / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM hsi / OMAP / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM i2c-hid / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM drm / exynos / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM gpio / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM hwrandom / exynos / PM: Use CONFIG_PM in #ifdef block / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM USB / PM: Drop CONFIG_PM_RUNTIME from the USB core PM: Merge the SET*_RUNTIME_PM_OPS() macros ... |
||
Linus Torvalds
|
6da314122d |
ARM: SoC DT updates for 3.19
The DT branch adds a lot of new stuff for additional SoC and board support. The branch is the largest one and contains 513 out of the total 972 non-merge arm-soc changesets for 3.19. Most of the changes are about enabling additional on-chip devices for existing machines, but there are also an unusual number of new SoC types being added this time: * AMLogic Meson8 * ARM Realview in DT mode * Allwinner A80 * Broadcom BCM47081 * Broadcom Cygnus * Freescale LS1021A * Freescale Vybrid 500 series * Mediatek MT6592, MT8127, MT8135 * STMicroelectronics STiH410 * Samsung Exynos4415 The level of support for the above differs widely, some are just stubs with nothing more than CPU, memory and a UART, but others are fairly complete. As usual, these get extended over time. There are also many new boards getting added, this is the list of model strings that are showing up in new dts files: * ARM RealView PB1176 * Altera SOCFPGA Arria 10 * Asus RT-N18U (BCM47081) * Buffalo WZR-1750DHP (BCM4708) * Buffalo WZR-600DHP2 (BCM47081) * Cygnus Enterprise Phone (BCM911360_ENTPHN) * D-Link DIR-665 * Google Spring * IGEP COM MODULE Rev. G (TI OMAP AM/DM37x) * IGEPv2 Rev. F (TI OMAP AM/DM37x) * LS1021A QDS Board * LS1021A TWR Board * LeMaker Banana Pi * MarsBoard RK3066 * MediaTek MT8127 Moose Board * MediaTek MT8135 evaluation board * Mele M3 * Merrii A80 Optimus Board * Netgear R6300 V2 (BCM4708) * Nomadik STN8815NHK * NovaTech OrionLXm * Olimex A20-OLinuXino-LIME2 * Raspberry Pi Model B+ * STiH410 B2120 * Samsung Monk board * Samsung Rinato board * Synology DS213j * Synology DS414 * TBS2910 Matrix ARM mini PC * TI AM5728 BeagleBoard-X15 * Toradex Colibri VF50 on Colibri Evaluation Board * Zynq ZYBO Development Board Other notable changes include: * exynos: cleanup of existing dts files * mvebu: improved pinctrl support for Armada 370/XP * nomadik: restructuring dts files * omap: added CAN bus support * shmobile: added clock support for some SoCs * shmobile: added sound support for some SoCs * sirf: reset controller support * sunxi: continuing the relicensing under dual GPL/MIT * sunxi: lots of new on-chip device support * sunxi: working simplefb support (long awaited) * various: provide stdout-path property for earlycon -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.12 (GNU/Linux) iQIVAwUAVIcj3mCrR//JCVInAQL9Nw//YKK1l5gDZMmJ5nZXapXaZXERACN1n7H6 9kkEZRF5ndUY4+MQmqYqHqBya04aQgnuHu0hsxbEAn2L3j2+ejZgc8XRqflArORy EXQvH/l6UNA11aCoLvKvT9fny76ZCOyEOALWXj9oLxhfd5X2d/So9q1ELFLgmc0S XnVMfpoXPeVPhe6l8EhF/qI0xYjM91CHWRopRQi6yp4DqFXV2+h5ggCpX1+S2e8L LyGNLk0RM9Mha+Qyy4O+LY+FoeWwDutQyat0ct9ov6FP8AYrR1N43d/ekJ57L8fU hVymo+5prUwEkIfQpsJQjPzonJxFssk1KD9t+GZ99VgEO02tvpjeB0nwoaWJxS25 MzU2Bgp0Z/Yu0Q0SGu5/fuMya1Mo+wRA1OyQLp515TQqdWyTLcPT9o/ahfw8Uf1W 6gBZoB+XXEQPI1sMHDDrn4r5T9mySsodAGfnvJoNxttnjCmVRzI5sXssnFji8TTF ciMEzfoTJNPqzxkzaOM13XmslKtFrI9A+DGgnOWn6oZXODzHcc6M+z/moiWy8b/e /HsbzWvp9HUPZVjM2AJR4iiyLXv7GRu9maNmGtoXKi9bnQDaNGWFovp/R5y8avQM xyzJ+6melNZnnoEue8/OOdum7jMeqPCRVQuqM2hKVcsmNEnb7kPBOi4AYXWTrTFO bcDvFylnmlA= =BHwA -----END PGP SIGNATURE----- Merge tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC DT updates from Arnd Bergmann: "The DT branch adds a lot of new stuff for additional SoC and board support. The branch is the largest one and contains 513 out of the total 972 non-merge arm-soc changesets for 3.19. Most of the changes are about enabling additional on-chip devices for existing machines, but there are also an unusual number of new SoC types being added this time: - AMLogic Meson8 - ARM Realview in DT mode - Allwinner A80 - Broadcom BCM47081 - Broadcom Cygnus - Freescale LS1021A - Freescale Vybrid 500 series - Mediatek MT6592, MT8127, MT8135 - STMicroelectronics STiH410 - Samsung Exynos4415 The level of support for the above differs widely, some are just stubs with nothing more than CPU, memory and a UART, but others are fairly complete. As usual, these get extended over time. There are also many new boards getting added, this is the list of model strings that are showing up in new dts files: - ARM RealView PB1176 - Altera SOCFPGA Arria 10 - Asus RT-N18U (BCM47081) - Buffalo WZR-1750DHP (BCM4708) - Buffalo WZR-600DHP2 (BCM47081) - Cygnus Enterprise Phone (BCM911360_ENTPHN) - D-Link DIR-665 - Google Spring - IGEP COM MODULE Rev. G (TI OMAP AM/DM37x) - IGEPv2 Rev. F (TI OMAP AM/DM37x) - LS1021A QDS Board - LS1021A TWR Board - LeMaker Banana Pi - MarsBoard RK3066 - MediaTek MT8127 Moose Board - MediaTek MT8135 evaluation board - Mele M3 - Merrii A80 Optimus Board - Netgear R6300 V2 (BCM4708) - Nomadik STN8815NHK - NovaTech OrionLXm - Olimex A20-OLinuXino-LIME2 - Raspberry Pi Model B+ - STiH410 B2120 - Samsung Monk board - Samsung Rinato board - Synology DS213j - Synology DS414 - TBS2910 Matrix ARM mini PC - TI AM5728 BeagleBoard-X15 - Toradex Colibri VF50 on Colibri Evaluation Board - Zynq ZYBO Development Board Other notable changes include: - exynos: cleanup of existing dts files - mvebu: improved pinctrl support for Armada 370/XP - nomadik: restructuring dts files - omap: added CAN bus support - shmobile: added clock support for some SoCs - shmobile: added sound support for some SoCs - sirf: reset controller support - sunxi: continuing the relicensing under dual GPL/MIT - sunxi: lots of new on-chip device support - sunxi: working simplefb support (long awaited) - various: provide stdout-path property for earlycon" * tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (510 commits) ARM: dts: rk3288: add arm,cpu-registers-not-fw-configured Revert "ARM: dts: rockchip: temporarily disable smp on rk3288" ARM: BCM5301X: Add DT for Buffalo WZR-600DHP2 ARM: BCM5301X: Add DT for Asus RT-N18U ARM: BCM5301X: Add DT for Buffalo WZR-1750DHP ARM: BCM5301X: Add DT for Netgear R6300 V2 ARM: BCM5301X: Add buttons for Netgear R6250 ARM: dts: rockchip: Add input voltage supply regulators in pmic for Marsboard ARM: BCM5301X: Add IRQs to Broadcom's bus-axi in DTS file arm: dts: zynq: Add Digilent ZYBO board arm: dts: zynq: Move crystal freq. to board level doc: dt: vendor-prefixes: Add Digilent Inc Documentation: devicetree: Fix Xilinx VDMA specification ARM: dts: rockchip: set FIFO size for SDMMC, SDIO and EMMC on rk3066 and rk3188 ARM: dts: rockchip: add label property for leds on Radxa Rock ARM: BCM5301X: Add LEDs for Netgear R6250 V1 ARM: BCM5301X: Add Broadcom's bus-axi to the DTS file ARM: dts: add sysreg phandle to i2c device nodes for exynos ARM: dts: Remove unused bootargs from exynos3250-rinato ARM: dts: add board dts file for Exynos3250-based Monk board ... |
||
Linus Torvalds
|
6cd94d5e57 |
ARM: SoC platform changes for 3.19
New and updated SoC support, notable changes include: * bcm: brcmstb SMP support * bcm: initial iproc/cygnus support * exynos: Exynos4415 SoC support * exynos: PMU and suspend support for Exynos5420 * exynos: PMU support for Exynos3250 * exynos: pm related maintenance * imx: new LS1021A SoC support * imx: vybrid 610 global timer support * integrator: convert to using multiplatform configuration * mediatek: earlyprintk support for mt8127/mt8135 * meson: meson8 soc and l2 cache controller support * mvebu: Armada 38x CPU hotplug support * mvebu: drop support for prerelease Armada 375 Z1 stepping * mvebu: extended suspend support, now works on Armada 370/XP * omap: hwmod related maintenance * omap: prcm cleanup * pxa: initial pxa27x DT handling * rockchip: SMP support for rk3288 * rockchip: add cpu frequency scaling support * shmobile: r8a7740 power domain support * shmobile: various small restart, timer, pci apmu changes * sunxi: Allwinner A80 (sun9i) earlyprintk support * ux500: power domain support Overall, a significant chunk of changes, coming mostly from the usual suspects: omap, shmobile, samsung and mvebu, all of which already contain a lot of platform specific code in arch/arm. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.12 (GNU/Linux) iQIVAwUAVIcjyGCrR//JCVInAQJJCRAA1Tm+HZGiAiTvXEAcm/T9tIA08uqtawHt cqyEAUyrnE8QxE4EhUd2pTw4EunVusqKF5EsDxOzw7b3ukUdLAWZE7bqBOSIJLqn hrfsQQ8dXLbyC7T/CHPnBVeM+pn9LiIc9qzpZ0YToiMnHBBI4vKFQntBjd31yoRE hN08I6AmDjQolOzzlqR1fuM0uZaKiHIcytdauTt3Vfqgg7FTHcTy3u1kClHTR1Lp m/KuDothGpR5OKjSnUQz7EO5V3KJEnaKey8z2xM1a7DLLAvJ6r2+DUaDopv9Dbz1 W/V3H7fi5tLvillVa8xmlmzqWZbPc1xw8MWqvHZSWIMRZqloAHpC1VWKn0ZuH4SW 5Bj4ubSrpYjJxjKYfrxtjmuzru3A2jWBNTSP5A4nsny0C3AUsXkfRmRS0VNdegF8 sUdQ1MF8vEMpQT3QPH88+ccFHeIgqbcayhKqLPf7r8q0kwlym5N7Y2amU2A/O6qz +324r+yzfSA70VgJZ5EhXxWVDOPB4Lc8EtoWnH6T/kjncIMwzEsbEbyB3X1OaREW pVn3PNo06VjHLYoiHX+8G99pOFR/JZvaQs6jGCXLs+Orjp5WfP+kafkWqcB5GAKU Pfd3AQsl6rKAITdu0XsTdPiICNS4CmBiWYPepQsTa3pQaNgB7fwZNQKelNRIdGc+ dF1lnQ7CXLQ= =lFoH -----END PGP SIGNATURE----- Merge tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform changes from Arnd Bergmann: "New and updated SoC support, notable changes include: - bcm: brcmstb SMP support initial iproc/cygnus support - exynos: Exynos4415 SoC support PMU and suspend support for Exynos5420 PMU support for Exynos3250 pm related maintenance - imx: new LS1021A SoC support vybrid 610 global timer support - integrator: convert to using multiplatform configuration - mediatek: earlyprintk support for mt8127/mt8135 - meson: meson8 soc and l2 cache controller support - mvebu: Armada 38x CPU hotplug support drop support for prerelease Armada 375 Z1 stepping extended suspend support, now works on Armada 370/XP - omap: hwmod related maintenance prcm cleanup - pxa: initial pxa27x DT handling - rockchip: SMP support for rk3288 add cpu frequency scaling support - shmobile: r8a7740 power domain support various small restart, timer, pci apmu changes - sunxi: Allwinner A80 (sun9i) earlyprintk support - ux500: power domain support Overall, a significant chunk of changes, coming mostly from the usual suspects: omap, shmobile, samsung and mvebu, all of which already contain a lot of platform specific code in arch/arm" * tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (187 commits) ARM: mvebu: use the cpufreq-dt platform_data for independent clocks soc: integrator: Add terminating entry for integrator_cm_match ARM: mvebu: add SDRAM controller description for Armada XP ARM: mvebu: adjust mbus controller description on Armada 370/XP ARM: mvebu: add suspend/resume DT information for Armada XP GP ARM: mvebu: synchronize secondary CPU clocks on resume ARM: mvebu: make sure MMU is disabled in armada_370_xp_cpu_resume ARM: mvebu: Armada XP GP specific suspend/resume code ARM: mvebu: reserve the first 10 KB of each memory bank for suspend/resume ARM: mvebu: implement suspend/resume support for Armada XP clk: mvebu: add suspend/resume for gatable clocks bus: mvebu-mbus: provide a mechanism to save SDRAM window configuration bus: mvebu-mbus: suspend/resume support clocksource: time-armada-370-xp: add suspend/resume support irqchip: armada-370-xp: Add suspend/resume support ARM: add lolevel debug support for asm9260 ARM: add mach-asm9260 ARM: EXYNOS: use u8 for val[] in struct exynos_pmu_conf power: reset: imx-snvs-poweroff: add power off driver for i.mx6 ARM: imx: temporarily remove CONFIG_SOC_FSL from LS1021A ... |
||
Linus Torvalds
|
6c9e92476b |
ARM: SoC cleanups for 3.19
The remaining cleanups for 3.19 are to a large part result of devicetree conversion nearing completion on two other platforms besides AT91: * Like AT91, Renesas shmobile is in the process to migrate to DT and multiplatform, but using a different approach of doing it one SoC at a time. For 3.19, the r8a7791 platform and associated\ "Koelsch" board are considered complete and we remove the non-DT non-multiplatform support for this. * The ARM Versatile Express has supported DT and multiplatform for a long time, but we have still kept the legacy board files around, because not all drivers were fully working before. We have finally taken the last step to remove the board files. Other changes in this branch are preparation for the later branches or just unrelated to the more interesting changes: * The dts files for arm64 get moved into per-vendor directories for a clearer structure. * Some dead code removal (zynq, exynos, davinci, imx) * Using pr_*() macros more consistently instead of printk(KERN_*) in some platform code. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.12 (GNU/Linux) iQIVAwUAVIdpgGCrR//JCVInAQIr/BAA3UZvPPf5dwy5OkULPTghvWueeL9NWZHr 8KwNWIIkIzCgr8zUf2HrMRRLtG429WQWHWxNA+TH9HpcHFGo/zJDBPaJ63cb3Rv1 YLDGJ0zYPXjOsiWUWHm2M5B4hWj0Is5CwYnuozcpLykzQ9QsLMTIv2CAXoJXpH9S sAdx/B5e9G7IqzlJRgbvCPNAZleLYUneYoIW5L68MaFIjfKXVrHzY6w0CJFt/UDa CVbP0iwVQNnL1Opr3ABAkBkJ7rrFU17jpBWMtrNsyyMCZQADiV5Z4+IBnW0uWSZj zn92dycwOSYRmrgOrI2J6r5vFtxWRyWfR5Au5rD02oQTIucGiLmaKMV5gNhoQrEq v53IknDZzqv+xbiARGnJKGdJs70AYjrurpNgXXzJt3W4dZ6vssotxhiYEXbpPPDN v5QxrOStePY+qBHeMLuQi8VoV9SI+j/YAiaXak4QWmiGHVDzvBfZ2P3wMCbj04Jp oxCZ6IGMczYwvqQ8vWXJOueLm+IfM0GcEFwslUwO95rMRMv7JRCXdvfNhL7wLlu8 f2Hd/Pk/u0bOUQXhZlFKNRFg78t4hgD1hMKHgmpEDTZ8P1XMuIrWoQu0xkSQZsYG MiGIqwRd5Ow9OWzWq3DNJ4EjhmvPYv2X/Dcvu7Jv4yq1zZQ8G6OnWkmWWn5ghq6M grvB27RnbuE= =Apdh -----END PGP SIGNATURE----- Merge tag 'cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC cleanups from Arnd Bergmann: "The remaining cleanups for 3.19 are to a large part result of devicetree conversion nearing completion on two other platforms besides AT91: - Like AT91, Renesas shmobile is in the process to migrate to DT and multiplatform, but using a different approach of doing it one SoC at a time. For 3.19, the r8a7791 platform and associated "Koelsch" board are considered complete and we remove the non-DT non-multiplatform support for this. - The ARM Versatile Express has supported DT and multiplatform for a long time, but we have still kept the legacy board files around, because not all drivers were fully working before. We have finally taken the last step to remove the board files. Other changes in this branch are preparation for the later branches or just unrelated to the more interesting changes: - The dts files for arm64 get moved into per-vendor directories for a clearer structure. - Some dead code removal (zynq, exynos, davinci, imx) - Using pr_*() macros more consistently instead of printk(KERN_*) in some platform code" * tag 'cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (71 commits) ARM: zynq: Remove secondary_startup() declaration from header ARM: vexpress: Enable regulator framework when MMCI is in use ARM: vexpress: Remove non-DT code ARM: imx: Remove unneeded .map_io initialization ARM: dts: imx6qdl-sabresd: Fix the microphone route ARM: imx: refactor mxc_iomux_mode() ARM: imx: simplify clk_pllv3_prepare() ARM: imx6q: drop unnecessary semicolon ARM: imx: clean up machine mxc_arch_reset_init_dt reset init ARM: dts: imx6qdl-rex: Remove unneeded 'fsl,mode' property ARM: dts: imx6qdl-gw5x: Remove unneeded 'fsl,mode' property ARM: dts: imx6qdl-sabresd: Use IMX6QDL_CLK_CKO define ARM: at91: remove useless init_time for DT-only SoCs ARM: davinci: Remove redundant casts ARM: davinci: Use standard logging styles ARM: shmobile: r8a7779: Spelling/grammar s/entity/identity/, s/map/mapping/ ARM: shmobile: sh7372: Spelling/grammar s/entity map/identity mapping/ ARM: shmobile: sh73a0: Spelling/grammar s/entity map/identity mapping/ ARM: EXYNOS: Remove unused static iomapping ARM: at91: fix build breakage due to legacy board removals ... |
||
Rafael J. Wysocki
|
648fcab2b0 |
Merge branch 'pm-cpuidle'
* pm-cpuidle: cpuidle: add MAINTAINERS entry for ARM Exynos cpuidle driver drivers: cpuidle: Remove cpuidle-arm64 duplicate error messages drivers: cpuidle: Add idle-state-name description to ARM idle states drivers: cpuidle: Add status property to ARM idle states cpuidle: Invert CPUIDLE_FLAG_TIME_VALID logic |
||
Rafael J. Wysocki
|
389cbf36e5 |
Merge branches 'pm-domains', 'pm-sleep' and 'pm-tools'
* pm-domains: ARM: shmobile: Convert to genpd flags for PM clocks for R-mobile ARM: shmobile: Convert to genpd flags for PM clocks for r8a7779 PM / Domains: Initial PM clock support for genpd PM / Domains: Power on the PM domain right after attach completes PM / Domains: Move struct pm_domain_data to pm_domain.h PM / Domains: Extract code to power off/on a PM domain PM / Domains: Make genpd parameter of pm_genpd_present() const * pm-sleep: PM / hibernate: Deletion of an unnecessary check before the function call "vfree" PM / Hibernate: Migrate to ktime_t * pm-tools: tools: cpupower: fix return checks for sysfs_get_idlestate_count() |
||
Ulf Hansson
|
cffa91380d |
ARM: shmobile: Convert to genpd flags for PM clocks for R-mobile
Instead of using the dev_ops ->stop|start() callbacks for genpd, let's convert to use genpd's flag field and set it to GENPD_FLAG_PM_CLK. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
Ulf Hansson
|
9c6a973629 |
ARM: shmobile: Convert to genpd flags for PM clocks for r8a7779
Instead of using the dev_ops ->stop|start() callbacks for genpd, let's convert to use genpd's flag field and set it to GENPD_FLAG_PM_CLK. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
Dave Airlie
|
e8115e79aa |
Linux 3.18-rc7
-----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQEcBAABAgAGBQJUe7l9AAoJEHm+PkMAQRiGkGcIAIryQ7NKn4IaxUtS807Lx4Ih obEnx7nNKZTXCZpD/7XQGHMMJyozMJR50PHZESJoHu4Luhv9h7EFRnyJ6MdqMlwn zla3zY0yRsHwPoJKcHbSE0CPHZz0WPQHj7IEbM+XJz2tMNJfbgTrezElmcCM4DRp c9ae+ggwZ2cyNYM0r2RSwSJ525WMh69f9dzSUE27fpvkllQgwqNs/jHYz8HNOEht FWcv5UhvzKjwJS3awULfOB3zH2QdFvVTrwAzd+kbV2Q6T6CaUoFRlhXeKUO6W2Jv pJM6oj8tMZUkdXEv7EQXT1kwEqC4DULTTTHs4tSF79O1ESmNfePiOwwBcwoM2nM= =kG1Y -----END PGP SIGNATURE----- Merge tag 'v3.18-rc7' into drm-next This fixes a bunch of conflicts prior to merging i915 tree. Linux 3.18-rc7 Conflicts: drivers/gpu/drm/exynos/exynos_drm_drv.c drivers/gpu/drm/i915/i915_drv.c drivers/gpu/drm/i915/intel_pm.c drivers/gpu/drm/tegra/dc.c |
||
Laurent Pinchart
|
5a0e9d7213 |
ARM: shmobile: marzen: Remove DU platform device
Platform data support has been removed from the DU driver, drop DU support from the legacy Marzen board file. The multiplatform DT-based Marzen support should be used instead. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Dave Airlie <airlied@redhat.com> |
||
Laurent Pinchart
|
792c17cbe2 |
ARM: shmobile: lager: Remove DU platform device
Platform data support has been removed from the DU driver, drop DU support from the legacy Lager board file. The multiplatform DT-based Lager support should be used instead. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Dave Airlie <airlied@redhat.com> |
||
Arnd Bergmann
|
3c6f4b154a |
Second Round of Renesas ARM Based SoC Cleanups for v3.19
* Spelling and grammar fixes -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJUbovwAAoJENfPZGlqN0++69QP/iu/h2HZYc0L3f0iZt0aQAL5 FXDVlhdDquprYjnaLX/HAymnxZf/TuCQIZY1B8UjdPV8DqvWllubV8DA9x22XsTY EsmP+acEzLqvPJEFzLvm9BFsNpHWDa1021zFU4x4WONLmqD5Ln2cninAOTkg5q4H ty68ij4okyxc6anemsQAPrZKdQFIhaokH1jzrbSHEtFEGd/WxzJkQtYtyMHp87Ep rn3Tkb1fFyaIPwl68smCsDcHeZDQG1UmC4NAWIJ+pPBS8vOKztkWneD0l0z5U2u5 3I5+G3Mnk/HO9I3+UKVCbNsh+hJ2tQfbailUYBat3RcWTch8/nj2H2AmjAFE5vF7 qTpCMQ7yIdvKuqJMvRrJudYFFSKGkJ/wrJ7gqZHk7FSfLx76IKswuZ4QkRXLKV+3 nJF/bsh8YkoLOmNKFeNL128U63UGgL4xqwgDK+gIxr3r18+ACSxtZvTU5X0dbVDX XD3to32Yjy1tdeN9vYFbwVA7gDr7fUiwuYUGZyk9F84AglJVrBrcoAjaff2aK38K GBsG6xvIlP4t8xQc5eMFbDa5E8j5Py/bUS7dDri9P+j/7750M/t8BdfYj8ByC7rq lvb5BPTRY/86ks42tfRAATwqYQuMlIsiQifvBvN64hYaXSHVFHl/IKEJSabH2G5i dWl79XHEacH+Z2EDVo35 =NxGD -----END PGP SIGNATURE----- Merge tag 'renesas-soc-cleanups2-for-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/cleanup Pull "Second Round of Renesas ARM Based SoC Cleanups for v3.19" from Simon Horman: * Spelling and grammar fixes * tag 'renesas-soc-cleanups2-for-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: ARM: shmobile: r8a7779: Spelling/grammar s/entity/identity/, s/map/mapping/ ARM: shmobile: sh7372: Spelling/grammar s/entity map/identity mapping/ ARM: shmobile: sh73a0: Spelling/grammar s/entity map/identity mapping/ Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
Arnd Bergmann
|
6febbf472b |
Fourth Round of Renesas ARM Based SoC Updates for v3.19
* Add early debugging support using SCIF(A) -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJUboyIAAoJENfPZGlqN0++ACgQAIuqcxX1F5dayIeggtoFg4d9 dG/YrZTZDRi5AcpXLgoMvt05Q908dDexwTxqSRjjahAil3xVVksjjU57dtKeV1a1 YgsuXHn/7S3Ai97Fk+3KyOQ+SqJZpUATkjTNKpQDTYsdzHf6qSWgxOOXk1e76Ubi DYQb3iNQUUtSrjK9KmiwQ/qdKdb+mkW7F4gprykYBsiNBxbwV8ynwFt8VOE1IjiQ nevT28HTJMCyWjvQTLXD0kPodhD+Qx81wrer6zusZp/HEQprCap+QhaR6owGnCPX AQXmvSl4QaA5CqA4QWPOEW38gNzOnMAu3CZUplTWmm1+kp0avNj0jms4UCa3ufwc RkGmv/AUefbWxEE3ZDH21Cbem2vDN/Pk/cY/EcDweaAGBomPua4fH54YD3yzLoIL omPsmx/dp6Dr3THoyGCXJbPGsVBJHqYT19PLsubMaG6FcC2KH4ootb5riX2rQzOa ihkhaANOPgTALj13gNs1Gv0Fpl1h4Mp3O119ZTZSFz74RNS3qO4/B+/dpIBM3v+B dJxuRsHWluRSMRRo4CTXtZP4WstABwZvEBFmGjPJSm6eP+UmBTdIsXS2C8Q22/Dy AGKIhZBxt2wI+SzpLtgAD3i/3MzH3T3NXTMqpH8xrrP09ePwXGdOzP53q4A28OLX 1L+BZGFNaoV3TRDzbhAq =O/9v -----END PGP SIGNATURE----- Merge tag 'renesas-soc4-for-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/soc Pull "Fourth Round of Renesas ARM Based SoC Updates for v3.19" from Simon Horman: * Add early debugging support using SCIF(A) * tag 'renesas-soc4-for-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: ARM: shmobile: Add early debugging support using SCIF(A) Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
Arnd Bergmann
|
86dd04a22a |
Renesas ARM Based SoC Koelsch Board Removal Updates for v3.19
* Remove lecacy C koelsh board support -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJUWBbDAAoJENfPZGlqN0++wYEP/1Ya7Vy+EP14FHFeLyDuxxa+ LqsMho7DSVIs9hvdd0FFZE5CODPKNLh3dPvQ5h421yOrevIlfy0/dHnNONLhlvNx 0GQHbGOz7qm7xUWekcxugy4U+i/MbGgWi7Y5BQSOXiGKeFJegylvD8ZMvmJfhZla UYDmkeOn1qVilUGBwD9XIqmsFKCitILqyOhdnqnQxSlxEbPwKJNrfptoqXxKFNov g6ieVvQI/mBw5hGl8p68ctcfmrAMIo//vGW7ScE/lILcCzkAizOBCzWFxoA+IxIR AjdZgAWBnMxnGMQ4qxyN9tfnoPy1h6t660lSCyUFgHGbSm3FQol/0vYI5x6259XV UL5XEScT2LtaMG7BowlmyZ8AJqzRJPHIFRpghNrqIbGE5r/SQT3tgQMLqJYJeXFQ Z0n329+wcWTLviBzmwZpjNhHwcuNqRUTr95OJmZLIIXS4lM+uGKBHwHGvX46Klcu Umq4ZeGmuGOqxG2p/73u06xh92+RaelAhKKZEAiO9PSmgenopikRdFqe/y1g9vOV d0qzW5VmiOf19zwEUqcn8WpOmD9VNEeQA6NF7HL1T2eFjIcAZQ+ZDR3g8EGzQo0B 91qsXShwvMJ7Xvhty1B9ki4Dt5Fd/+H845X6Da68m8OJmUqVRX7ojiX0aTdxqrHp FHF41Umf29euca+1NF9t =Eohe -----END PGP SIGNATURE----- Merge tag 'renesas-koelsch-board-removal-for-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/cleanup Pull "Renesas ARM Based SoC Koelsch Board Removal Updates for v3.19" from Simon Horman: * Remove lecacy C koelsh board support * tag 'renesas-koelsch-board-removal-for-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: ARM: shmobile: koelsch dts: Drop console= bootargs parameter ARM: dts: koelsch: Stop building r8a7791-koelsch.dtb in legacy builds MAINTAINERS: Remove reference to shmobile / koelsch_defconfig ARM: shmobile: koelsch: Remove reference board code ARM: shmobile: r8a7791: Remove legacy code ARM: shmobile: koelsch: Remove legacy C board code ARM: shmobile: Remove shmobile_clk_workaround() implementation Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
Arnd Bergmann
|
73a0e3350c |
Renesas ARM Based SoC Boards Updates for v3.19
* Add restart callback to kzm9g -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJUYrwJAAoJENfPZGlqN0++T14P/AgLo05kfWeUUWC1/p2atyVG UfNfVAlJctMQtZN23XNVSRE+mfUGvGVAeYQJo+kbGGHFCiIE5s5L9mNxn3cHmRd6 w260S3NEQaTpwBj5Tg0dCQVgDDUm8HMf3sh/Iex++l/BlSMe1Y4aB+B84HSA5l7t MCOIq/ShY05B16KLaLwUihZnJUN3eZ9/0HkGUVN4dKQvU2+tlYTGSpE1XlCm/kWC Rq+bLLew/1zPfebtWdqnSX50Vu3/UkYs4629ahqycyOSXvqpqMbN7mrHN6+uSruR 49fUt2fsauESX2deFYO18f/T0eNqf7tp9opTIQdNCA2u87pTeQSx4JQzWItJGUu/ f32CS4aANSNAPRjeRukbBJuuFCWAM1vN9rHbpAKV/d0n70YcNesC5nzGL7IzsH8Y pVg6guHLCInMB72P+AC/8HHeru09qoNOj5p1R15i+vqc71XJrrVm/nuP+IIh9WY/ a71rC3rY409b15ZjURBRs+T8C8Kyg3i7zPpj/ColSniHr0AO6GWHoWTt9T7RITUG FPSPTNhFs0SEPG7qwp6eWN4Nqsfb7M4BEZe6nL8VFj5cgh2XugJ7xaE6ij1Sfj1P ihmqUFft1JEbEV/f43yl6rb/i8aIt5qel9mGtv+doPzxgL62NBVra/jtVY+DYBkY 757L9/7tIV4wwy/JQpj7 =k0Vx -----END PGP SIGNATURE----- Merge tag 'renesas-boards-for-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/soc Pull "Renesas ARM Based SoC Boards Updates for v3.19" from Simon Horman: * Add restart callback to kzm9g * tag 'renesas-boards-for-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: ARM: shmobile: kzm9g-reference: Add restart callback Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
Arnd Bergmann
|
8ecb3ccb74 |
Renesas ARM Based SoC DT DU Updates for v3.19
* Enable DU using DT on marzen/r8a7779, lager/r8a7790 and koelsch/r8a7791 -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJUWBRRAAoJENfPZGlqN0++Pm0P/3Qa+X8o4kAZETi+ER+Q7s/B d0EGNAw/1b/Si7D2SpftRHvHx5TDL2QiU0QIAPWAcd4u1NJxaYP/SDwRETGQnHbV TsL25mASYNByP6DXTrBJneiDS5U88DwVP5q5FW9WEkvIbmtzbxTe/7OnSPAjhxl0 83kXATiHwdRct4KYLW8ngNhaY/9OUjrL+wZ8ffN/dM0EpSyixXK5bHmWLFC5/HGY D8b+zW/NTSBOYTk1OR6QSlp/eGmjRCG2UJn4toHWKse2defxZ/hyTUas4ysgDXzC gsWT96yLwmueTRcSBglkKGFbPukWcyKPt7sRphtZlTYbJmpS0ncBTfC2s0+Jv2RR VDpeAmB6NXQ5L7Ck51ryt4A8kX88uOgHrmcz+NGJadNE07TZgLJBLDf6aSjDsytr NIZq7RFNK975Qv3QldQJX4PYmqcWJMI5WDPnm2buzZsKHkjQrpKIicAiSlwzJX/9 4SeCF2yrZuJJVnJwit8gOvvBHq5ORQrumAs1xrPQiu570p+6jBjjJ5v4sDvuF5UY nXfMTUGrNYe8JSxjf8NTmXJX8DRKSLq0tGcHbzajvKVzuy8Gp6+yFNkrqzQj2HK6 dy4TLtuvMk5JB4E5Q22xdYYV4TorO28qiuGoGDOOwIx6+940MdY/ucE2Z4i4M2R7 /NZJCpITds6HxVZJWAKo =m0Ov -----END PGP SIGNATURE----- Merge tag 'renesas-dt-du-for-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/cleanup Pull "Renesas ARM Based SoC DT DU Updates for v3.19" from Simon Horman: * Enable DU using DT on marzen/r8a7779, lager/r8a7790 and koelsch/r8a7791 * tag 'renesas-dt-du-for-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: ARM: shmobile: koelsch: Enable DU device in DT ARM: shmobile: koelsch-reference: Remove DU platform device ARM: shmobile: lager: Enable DU device in DT ARM: shmobile: lager-reference: Remove DU platform device ARM: shmobile: marzen: Enable DU device in DT ARM: shmobile: dts: Add common file for AA104XD12 panel ARM: shmobile: r8a7791: Add DU node to device tree ARM: shmobile: r8a7790: Add DU node to device tree ARM: shmobile: r8a7779: Add DU node to device tree Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
Arnd Bergmann
|
1cee6a96cd |
Second Round of Renesas ARM Based SoC Boards Cleanups for v3.19
* marzen-reference: Don't include legacy clock.h -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJUWBZoAAoJENfPZGlqN0++TsEQAI43mmu8RgLlCyWTcRu928C9 6ui0WocKzZWYWkZJCAjtOestossOBHr+jYWISAPTHpVX1S3snKNFz6SdzMJNkYQI eFBSVpDsk3eSd+IUI6Z4ZZD/JSGHFRmxRzTp0wkdp4dQCi6/Rskm1IqzX0uF/+6b bspYnBP3DPExnAy8NgGrJzjCm8fv9UDAXb7waA7fJrybzjoM0fuwo4NeXZTxrY4F 1F2rXLgLZvdRX9SuWka0Le4v5TeGB/5mxtBUdwekllaVEs+S0HQcG4faj90NNK8Q KR7XYRSZQLjKr4ndpq67iFSACubep1gngcB6TqxYlo9n52RkFOrBwWyyHuCodqfl uvjGm8ReZtqbWpkHta8a9hQlQjuX+IYT6Maw+eI0qwCMHl6miNzV/JTslWQVjfY7 OOn9bJFR8JOJo1K+dstPYuynx1OR7EryzrTcFKtMPCFzArmGb6Xle++y5OiVWkNc AZlwAqNfPTU+46oTZd1fb9EdLotjQKzUkFQWGkt34WjA88eqDPQt3S6fv9Mhe6s6 gjLdtFL5zM8y5IB8wrAQsg9WEjCTekjje3nMCLhhEvHdh/CxZ1uMPRVWrfkoMtvd 1Jq98j9Q3LFaPZRnicH53FWqzOGgYsvHrtU5v01Bf9PgyvhDc3uIAuwxMKGbN9qo pinzk1jmH8XLCoSI5sOz =1JF0 -----END PGP SIGNATURE----- Merge tag 'renesas-boards-cleanups2-for-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/cleanup Pull "Second Round of Renesas ARM Based SoC Boards Cleanups for v3.19" form Simon Horman: * marzen-reference: Don't include legacy clock.h * tag 'renesas-boards-cleanups2-for-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: ARM: shmobile: marzen-reference: Don't include legacy clock.h Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
Arnd Bergmann
|
b4e2c4bf4f |
Third Round of Renesas ARM Based Soc Updates for v3.19
* Always build rcar setup for armv7 - Fixes allmodconfig build fauilre caused by "ARM: shmobile: always build rcar setup for armv7" * Add restart callback to sh73a0 -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJUZAalAAoJENfPZGlqN0++VREP/3y7uJB/lLTr1u0tXiBHGAUX ElNcUR7JgDnfWyhVwh9Nyo91kx3A95Z72PzouGQQVVmZc1ZuhIU/XKCjDRRGuTHY JiWNacLNVHXCm4tQ//T7MjTEt7jXeUKciSLlq4vSHk4Wn0uUYEWibYDIrrysm0d/ 7JAxJL+D59AUfGcL9rTiuolCtBLgB6V099WE0WNTFeWxktfCORQiiuck3yv54Ar7 djxLAsjDQgtWszUzaVlLJjeI/X9bRCO1yWzCmSRR4Kek0A/ZTCH5UrpWlc3fkUyz zdmRv0IherWn/PB1NTdVlgSDDeDOmIPu9K2JIvaVbfRyRAKehkqjqdEbUYWc+F88 gICU8y2qBBl1/F8xVhS1dPMyGlTkebzFPAXbUCPVrtfVJdmhAMKoWZ5cGG3gap9L nvhaj7CxU3hCfBUUYz7AtmpCBXN6WY/HNldR4JK9rw+eW+NZVOM+P5xnjvyYwhb6 2oua8RL99qzWxaXbWdIisLK9/YgDQFCF3id/f21Wvawb+uoNJjiyFIOiTJ0SLj9H 02EX7rrbwm9eVNGgNUJnjPWpW7YcUUPJFk4qv1VLCsHwNyvBfLbs3A6hxG7fJF7x HKmMK8FRCtYTWHIUqMkCJ3SQ3ineK6rrmf1HyrNa0rBdr1uhgAVAAsX/LDKDY1Fe o9pWDKsfYjNN8KARepBN =H86n -----END PGP SIGNATURE----- Merge tag 'renesas-soc3-for-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/soc Pull "Third Round of Renesas ARM Based Soc Updates for v3.19" from Simon Horman: * Always build rcar setup for armv7 - Fixes allmodconfig build fauilre caused by "ARM: shmobile: always build rcar setup for armv7" * Add restart callback to sh73a0 * tag 'renesas-soc3-for-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: ARM: shmobile: always build rcar setup for armv7 ARM: shmobile: sh73a0: Add restart callback Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
Arnd Bergmann
|
0a1d643450 |
Second Round of Renesas ARM Based SoC Soc Updates for v3.19
* Enable PCI domains for R-Car Gen2 devices * Make APMU resource code SoC-specific -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJUZAXRAAoJENfPZGlqN0++qlgQAIne34JegIo6zR6IHUyHzvNK QqXeFTQvWyUX5jCVsn79gL7gwOuOoSwDqvrdGOla/LH4zayfG/kloFowxoO6qcdl UGKKTJMWgh4BKMusIskjoDShqGDIbyPRMcs+SdmU0+qrGZh9gYfifUZqopQ2+FpL 2vvPA0vR5J7kfT5Vg8sUkYdbPoivcnL76D5nZonsEcIn0wKEyTL9AY0b5uNMJIxc em1zBtt5zICwA5iiJKe7Q59z1st5Z/LDWFQP24uquKZwfShawMddm9kPfLqHlSnr SD9qzAaBPar30R+QDfQH7pC4q3MlALAqAmIWIgaBDLubkJwd5N5yTAgQ7Uw4uqH6 8mwfYY4cnyD9R5CTVUYVn/pY1+QYjjXoYHWlgJkhhsnC8iwYd/FLcXhy793Kk0ac b2UusUO/zEILVh2wZT2ki50LIURM7dW0CUhl5Gt4G8c+zMQ8FwtZi33eW9Gpf+1k xWPvKMt5rIi0YyI19mxlhdAp2GF2yWR7uycb4FeN/z/ce5GOAaDOWt1Gtib3YjM9 EQxGFPCWhrTJ/vfufYr4tfPLJeedQ8XpFIKL9ACvIY67zOst5nEkE9g6Lyt23ByU NbwQSHV8dpIWGkmps4QazDyy2vwQTrUxa0XPU2JcAxO50UjiHGlK6WOKAn610StU xji8z2cdEbNZ5zV/1tfs =g7rn -----END PGP SIGNATURE----- Merge tag 'renesas-soc2-for-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/soc Pull "Second Round of Renesas ARM Based SoC Soc Updates for v3.19" from Simon Horman: * Enable PCI domains for R-Car Gen2 devices * Make APMU resource code SoC-specific * tag 'renesas-soc2-for-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: ARM: shmobile: Enable PCI domains for R-Car Gen2 devices ARM: shmobile: r8a7791: Correct number of CPU cores ARM: shmobile: Separate APMU resource data into CPU dependant part Signed-off-by: Arnd Bergmann <arnd@arndb.de> |