The norm_swidth function was unused and is dropped. It's not clear
what the purpose of that function was.
The norm_maxh function was changed so it tests for 60 Hz standards
rather than for 50 Hz standards. The is the preferred order.
The norm_maxw function was poorly written and used: it gives the maximum
allowed line width for the given standard. For 60 Hz that's 720, but
for 50 Hz that's 768 which allows for 768x576 which gives you square
pixels. For 60 Hz formats it is 640x480 that gives square pixels, so
there is no need to go beyond 720.
The initial width was set using norm_maxh(), which was wrong. Just set
to 720, that's what you normally use. Since the initial standard was
NTSC anyway the initial width was always 720 anyway.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Tested VBI support and discovered that the wrong offset was used.
After this change it is now working. Verified with CC/XDS for NTSC
and WSS/Teletext on PAL.
It also reported the wrong start lines for the second field. That's
now fixed as well.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
There are some patches that depends on media-v3.16-rc6.
So, merge back from upstream before applying them.
* linus/master: (1123 commits)
drm/nouveau: ltc/gf100-: fix cbc issues on certain boards
drm/bochs: add missing drm_connector_register call
drm/cirrus: add missing drm_connector_register call
staging: vt6655: buffer overflow in ioctl
USB: storage: Add quirks for Entrega/Xircom USB to SCSI converters
USB: storage: Add quirk for Ariston Technologies iConnect USB to SCSI adapter
USB: storage: Add quirk for Adaptec USBConnect 2000 USB-to-SCSI Adapter
USB: EHCI: unlink QHs even after the controller has stopped
[SCSI] fix for bidi use after free
[SCSI] fix regression that accidentally disabled block-based tcq
[SCSI] libiscsi: fix potential buffer overrun in __iscsi_conn_send_pdu
drm/radeon: Fix typo 'addr' -> 'entry' in rs400_gart_set_page
drm/nouveau/runpm: fix module unload
drm/radeon/px: fix module unload
vgaswitcheroo: add vga_switcheroo_fini_domain_pm_ops
drm/radeon: don't reset dma on r6xx-evergreen init
drm/radeon: don't reset sdma on CIK init
drm/radeon: don't reset dma on NI/SI init
drm/radeon/dpm: fix resume on mullins
drm/radeon: Disable HDP flush before every CS again for < r600
...
tw_writel maps to writel which maps to __raw_writel(__cpu_to_le32(b),addr).
So tw_writel already calls cpu_to_le32 and it shouldn't be called again
in the code.
Reported-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
The code to calculate the maximum number of buffers allowed in 4 MB
is 1) wrong if PAGE_SIZE != 4096 and 2) unnecessarily complex.
Fix and simplify the code.
Reported-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Before you can change the standard or the capture format, make sure the
various vb2_queues aren't in use since you cannot change the buffer size from
underneath a a busy vb2_queue.
Also make sure that the return code of cx23885_set_tvnorm is returned
correctly, otherwise the -EBUSY will be lost.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
It's just as easy to do it in the driver. This dependency only uses a
fraction of the btcx-risc module and doing it directly in the driver
adds only a few lines. The btcx-risc module is really meant for the
bttv driver, not for other drivers.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Add missing SEQ_BT/TB support, bottom field is first for all 60 Hz formats,
not just NTSC, restore an overwritten field value and initialize dev->field
correctly.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
As usual, this patch is very large due to the fact that half a vb2 conversion
isn't possible. And since this affects 417, alsa, core, dvb, vbi and video the
changes are all over.
What made this more difficult was the peculiar way the risc program was setup.
The driver allowed for running out of buffers in which case the DMA would stop
and restart when the next buffer was queued. There was also a complicated
timeout system for when buffers weren't filled. This was replaced by a much
simpler scheme where there is always one buffer around and the DMA will just
cycle that buffer until a new buffer is queued. In that case the previous
buffer will be chained to the new buffer. An interrupt is generated at the
start of the new buffer telling the driver that the previous buffer can be
passed on to userspace.
Much simpler and more robust. The old code seems to be copied from the
cx88 driver. But it didn't fit the vb2 ops very well and replacing it with
the new scheme made the code easier to understand. Not to mention that this
patch removes 600 lines of code.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Sparse is complaining about ngene's bad usage of a __user ptr:
>> drivers/media/pci/ngene/ngene-dvb.c:62:48: sparse: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ngene/ngene-dvb.c:62:48: expected unsigned char const [usertype] *buf
drivers/media/pci/ngene/ngene-dvb.c:62:48: got char const [noderef] <asn:1>*buf
As this is intercepting a .write() file ops, we can't just memcpy. We need to use
copy_from_user.
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
drivers/media/pci/tw68/tw68-core.c:72:22: warning: symbol 'tw68_pci_tbl' was not declared. Should it be static?
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Refactor and clean up the tw68 driver. It's now using the proper
V4L2 core frameworks.
Tested with my Techwell tw6805a and tw6816 grabber boards.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
This tw68 driver has been out-of-tree for many years on gitorious:
https://gitorious.org/tw68/tw68-v2.
This copies that code to the kernel as a record of that original code.
Note that William Brack's email address in these sources is no longer
valid and I have not been able to contact him. However, all the code is
standard GPL.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Instead of allocating a var to store 0 and just return it,
change the code to return 0 directly.
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Instead of allocating a var to store 0 and just return it,
change the code to return 0 directly.
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
lml33dpatch is boolean. So, the possible values are
true or false.
Instead of using if (lml33dpath), just use
if (!lml33dpath).
That allows a faster mental parsing when analyzing the
code.
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
drivers/media/pci/ivtv/ivtv-irq.c:195:25: warning: incorrect type in argument 1 (different base types)
drivers/media/pci/ivtv/ivtv-irq.c:199:25: warning: incorrect type in argument 1 (different base types)
drivers/media/pci/ivtv/ivtv-irq.c:278:35: warning: restricted __le32 degrades to integer
drivers/media/pci/ivtv/ivtv-irq.c:281:51: warning: restricted __le32 degrades to integer
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
drivers/media/pci/dm1105/dm1105.c:617:9: warning: incorrect type in argument 1 (different base types)
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
drivers/media/pci/mantis/hopper_vp3028.c:37:23: warning: symbol 'hopper_vp3028_config' was not declared. Should it be static?
drivers/media/pci/mantis/mantis_vp1033.c:38:4: warning: symbol 'lgtdqcs001f_inittab' was not declared. Should it be static?
drivers/media/pci/mantis/mantis_vp1033.c:153:23: warning: symbol 'lgtdqcs001f_config' was not declared. Should it be static?
drivers/media/pci/mantis/mantis_vp1034.c:39:23: warning: symbol 'vp1034_mb86a16_config' was not declared. Should it be static?
drivers/media/pci/mantis/mantis_vp1041.c:266:23: warning: symbol 'vp1041_stb0899_config' was not declared. Should it be static?
drivers/media/pci/mantis/mantis_vp1041.c:303:23: warning: symbol 'vp1041_stb6100_config' was not declared. Should it be static?
drivers/media/pci/mantis/mantis_vp2033.c:40:24: warning: symbol 'vp2033_tda1002x_cu1216_config' was not declared. Should it be static?
drivers/media/pci/mantis/mantis_vp2033.c:45:24: warning: symbol 'vp2033_tda10023_cu1216_config' was not declared. Should it be static?
drivers/media/pci/mantis/mantis_vp2040.c:40:24: warning: symbol 'vp2040_tda1002x_cu1216_config' was not declared. Should it be static?
drivers/media/pci/mantis/mantis_vp2040.c:45:24: warning: symbol 'vp2040_tda10023_cu1216_config' was not declared. Should it be static?
drivers/media/pci/mantis/mantis_vp3030.c:38:23: warning: symbol 'mantis_vp3030_config' was not declared. Should it be static?
drivers/media/pci/mantis/mantis_vp3030.c:42:23: warning: symbol 'env57h12d5_config' was not declared. Should it be static?
drivers/media/pci/mantis/mantis_dma.c:167:33: warning: incorrect type in assignment (different base types)
drivers/media/pci/mantis/mantis_dma.c:172:33: warning: incorrect type in assignment (different base types)
drivers/media/pci/mantis/mantis_dma.c:174:25: warning: incorrect type in assignment (different base types)
drivers/media/pci/mantis/mantis_dma.c:178:9: warning: incorrect type in assignment (different base types)
drivers/media/pci/mantis/mantis_dma.c:179:9: warning: incorrect type in assignment (different base types)
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
drivers/media/pci/ngene/ngene-core.c:188:27: warning: incorrect type in argument 1 (different address spaces)
drivers/media/pci/ngene/ngene-core.c:190:25: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ngene/ngene-core.c:199:9: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ngene/ngene-core.c:260:9: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ngene/ngene-core.c:263:9: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ngene/ngene-core.c:282:32: warning: incorrect type in argument 1 (different address spaces)
drivers/media/pci/ngene/ngene-core.c:283:17: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ngene/ngene-core.c:284:17: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ngene/ngene-core.c:285:17: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ngene/ngene-core.c:286:17: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ngene/ngene-core.c:287:17: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ngene/ngene-core.c:288:17: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ngene/ngene-core.c:292:17: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ngene/ngene-core.c:293:17: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ngene/ngene-core.c:294:17: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ngene/ngene-core.c:295:17: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ngene/ngene-core.c:296:17: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ngene/ngene-core.c:297:17: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ngene/ngene-core.c:303:17: warning: incorrect type in argument 1 (different address spaces)
drivers/media/pci/ngene/ngene-core.c:316:9: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ngene/ngene-core.c:368:17: warning: incorrect type in argument 1 (different address spaces)
drivers/media/pci/ngene/ngene-core.c:372:9: warning: incorrect type in argument 1 (different address spaces)
drivers/media/pci/ngene/ngene-core.c:1160:28: warning: incorrect type in argument 1 (different address spaces)
drivers/media/pci/ngene/ngene-core.c:1199:20: warning: incorrect type in assignment (different address spaces)
drivers/media/pci/ngene/ngene-core.c:1213:30: warning: incorrect type in argument 1 (different address spaces)
drivers/media/pci/ngene/ngene-core.c:1214:30: warning: incorrect type in argument 1 (different address spaces)
drivers/media/pci/ngene/ngene-core.c:1223:9: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ngene/ngene-core.c:1225:24: warning: incorrect type in argument 1 (different address spaces)
drivers/media/pci/ngene/ngene-core.c:1227:31: warning: incorrect type in argument 1 (different address spaces)
drivers/media/pci/ngene/ngene-core.c:1296:9: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ngene/ngene-core.c:1297:9: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ngene/ngene-core.c:1298:9: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ngene/ngene-core.c:1299:9: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ngene/ngene-core.c:1300:9: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ngene/ngene-core.c:1301:9: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ngene/ngene-core.c:1302:9: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ngene/ngene-core.c:1363:9: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ngene/ngene-core.c:1365:9: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ngene/ngene-core.c:1376:17: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ngene/ngene-core.c:1391:17: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ngene/ngene-core.c:1596:18: warning: Using plain integer as NULL pointer
drivers/media/pci/ngene/ngene-core.c:1615:9: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ngene/ngene-cards.c:699:29: warning: Using plain integer as NULL pointer
drivers/media/pci/ngene/ngene-cards.c:699:32: warning: Using plain integer as NULL pointer
drivers/media/pci/ngene/ngene-cards.c:699:35: warning: Using plain integer as NULL pointer
drivers/media/pci/ngene/ngene-cards.c:699:38: warning: Using plain integer as NULL pointer
drivers/media/pci/ngene/ngene-dvb.c:84:59: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ngene/ngene-dvb.c:93:20: warning: incorrect type in initializer (incompatible argument 2 (different address spaces))
drivers/media/pci/ngene/ngene-dvb.c:94:20: warning: incorrect type in initializer (incompatible argument 2 (different address spaces))
drivers/media/pci/ngene/ngene-dvb.c💯20: warning: Using plain integer as NULL pointer
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
drivers/media/pci/ddbridge/ddbridge-core.c:88:9: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:93:37: warning: incorrect type in argument 1 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:95:25: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:99:15: warning: incorrect type in argument 1 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:117:58: warning: incorrect type in argument 1 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:119:17: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:123:68: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:130:17: warning: incorrect type in argument 1 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:131:17: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:136:17: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:138:25: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:152:22: warning: symbol 'ddb_i2c_algo' was not declared. Should it be static?
drivers/media/pci/ddbridge/ddbridge-core.c:183:17: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:184:17: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:246:25: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:247:25: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:255:25: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:256:25: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:269:35: warning: Using plain integer as NULL pointer
drivers/media/pci/ddbridge/ddbridge-core.c:358:9: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:359:9: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:360:9: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:362:9: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:366:9: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:368:9: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:369:9: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:370:9: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:380:9: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:381:9: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:393:9: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:394:9: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:395:9: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:396:9: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:397:9: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:401:9: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:403:9: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:404:9: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:406:9: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:416:9: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:417:9: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:475:36: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:484:17: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:494:20: warning: incorrect type in argument 1 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:501:17: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:524:36: warning: incorrect type in argument 1 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:534:17: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:852:21: warning: Using plain integer as NULL pointer
drivers/media/pci/ddbridge/ddbridge-core.c:973:20: warning: incorrect type in initializer (incompatible argument 2 (different address spaces))
drivers/media/pci/ddbridge/ddbridge-core.c:974:20: warning: incorrect type in initializer (incompatible argument 2 (different address spaces))
drivers/media/pci/ddbridge/ddbridge-core.c:978:20: warning: Using plain integer as NULL pointer
drivers/media/pci/ddbridge/ddbridge-core.c:982:20: warning: Using plain integer as NULL pointer
drivers/media/pci/ddbridge/ddbridge-core.c:1003:23: warning: incorrect type in argument 1 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:1006:23: warning: incorrect type in argument 1 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:1009:30: warning: incorrect type in argument 1 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:1015:25: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:1017:39: warning: incorrect type in argument 1 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:1035:24: warning: incorrect type in argument 1 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:1041:20: warning: symbol 'cxd_cfg' was not declared. Should it be static?
drivers/media/pci/ddbridge/ddbridge-core.c:1130:44: warning: Using plain integer as NULL pointer
drivers/media/pci/ddbridge/ddbridge-core.c:1183:17: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:1188:17: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:1193:17: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:1198:17: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:1213:9: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:1214:9: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:1215:9: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:1216:9: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:1231:9: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:1232:9: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:1233:9: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:1289:17: warning: incorrect type in argument 1 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:1333:23: warning: incorrect type in argument 1 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:1295:17: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:1347:17: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:1353:17: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:1354:24: warning: incorrect type in argument 1 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:1359:17: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:1361:17: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:1373:9: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:1374:16: warning: incorrect type in argument 1 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:1378:17: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:1382:17: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:1385:17: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:1386:24: warning: incorrect type in argument 1 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:1388:24: warning: incorrect type in argument 1 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:1393:9: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:1394:9: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:1395:16: warning: incorrect type in argument 1 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:1398:16: warning: incorrect type in argument 1 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:1399:9: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:1451:42: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:1462:45: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:1467:37: warning: incorrect type in argument 1 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:1538:28: warning: incorrect type in argument 1 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:1550:9: warning: incorrect type in argument 2 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:1561:31: warning: Using plain integer as NULL pointer
drivers/media/pci/ddbridge/ddbridge-core.c:1585:19: warning: incorrect type in assignment (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:1591:47: warning: incorrect type in argument 1 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:1591:60: warning: incorrect type in argument 1 (different address spaces)
drivers/media/pci/ddbridge/ddbridge-core.c:1607:9: warning: too many warnings
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
drivers/media/pci/solo6x10/solo6x10-disp.c:184:24: warning: incorrect type in assignment (different base types)
drivers/media/pci/solo6x10/solo6x10-disp.c:223:32: warning: incorrect type in assignment (different base types)
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
This was caused by an uninitialized setup.config field.
Based on a suggestion from Devin Heitmueller.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Thanks-to: Devin Heitmueller <dheitmueller@kernellabs.com>
Reported-by: Scott Robinson <scott.robinson55@gmail.com>
Tested-by: Hans Verkuil <hans.verkuil@cisco.com>
Cc: stable@vger.kernel.org # for v3.10 and up
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
These addresses are usually out-of-date and the top-level license will
always have the right address. So drop it from these sources.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Use video_drvdata(file) instead of fh->dev to get the cx23885_dev
pointer. This prepares for the vb2 conversion where fh->dev (renamed
to fh->q_dev in this patch) will be removed completely.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
The alsa driver uses videobuf low-level functions that are not
available in vb2, so replace them by driver-specific functions.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Move these fields from cx23885_fh to cx23885_dev.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
There is no overlay support, so drop these unused fields.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
This information is available elsewhere as well.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Currently no radio device nodes are ever created, so remove the dead radio
code.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
If field format is not valid, map it as V4L2_FIELD_INTERLACED,
instead of pretending to support an invalid format.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Convert the -417 source to the control framework as well.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
This is part 1, converting the uncompressed video/vbi nodes to use
the control framework.
The next patch converts the compressed video node as well.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Enable core locking which allows us to safely switch to unlocked_ioctl.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Add support for struct v4l2_fh and priority handling.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Fix a bunch of v4l2-compliance errors relating to audio input handling.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Set device_caps to fix the v4l2-compliance QUERYCAP complaints.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Fix build when CONFIG_INPUT_EVDEV=m and DVB_AV7110=y.
Only build av7110_ir.c when CONFIG_INPUT_EVDEV is compatible with
CONFIG_DVB_AV7110.
Fixes these build errors:
drivers/built-in.o: In function `input_sync':
av7110_ir.c:(.text+0x1223ac): undefined reference to `input_event'
drivers/built-in.o: In function `av7110_emit_key':
av7110_ir.c:(.text+0x12247c): undefined reference to `input_event'
av7110_ir.c:(.text+0x122495): undefined reference to `input_event'
av7110_ir.c:(.text+0x122569): undefined reference to `input_event'
av7110_ir.c:(.text+0x1225a7): undefined reference to `input_event'
drivers/built-in.o:av7110_ir.c:(.text+0x122629): more undefined
references to `input_event' follow
drivers/built-in.o: In function `av7110_ir_init':
(.text+0x1227e4): undefined reference to `input_allocate_device'
drivers/built-in.o: In function `av7110_ir_init':
(.text+0x12298f): undefined reference to `input_register_device'
drivers/built-in.o: In function `av7110_ir_init':
(.text+0x12299e): undefined reference to `input_free_device'
drivers/built-in.o: In function `av7110_ir_exit':
(.text+0x122a94): undefined reference to `input_unregister_device'
drivers/built-in.o: In function `av7110_detach':
av7110.c:(.text+0x228d4a): undefined reference to `av7110_ir_exit'
drivers/built-in.o: In function `arm_thread':
av7110.c:(.text+0x22a404): undefined reference to `av7110_check_ir_config'
av7110.c:(.text+0x22a626): undefined reference to `av7110_check_ir_config'
drivers/built-in.o: In function `av7110_attach':
av7110.c:(.text+0x22b08c): undefined reference to `av7110_ir_init'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: Jim Davis <jim.epost@gmail.com>
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
In the list of subdirectories compiled, b2c2/ appears twice.
This patch removes one of the appearances.
Signed-off-by: Andreas Ruprecht <rupran@einserver.de>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Sometimes dev->tuner_type is compared to UNSET, sometimes to TUNER_ABSENT,
but these defines have different values.
Standardize to TUNER_ABSENT.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
The same card entry is used for HVR-4400 and HVR-5500.
Only HVR-5500 has been tested.
Signed-off-by: Matthias Schwarzott <zzam@gentoo.org>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
