Following a reset, Flow Director filters are cleared from the hardware.
Rebuild the filters using the software structures containing the filter
rules.
Signed-off-by: Henry Tieman <henry.w.tieman@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Flex-bytes allows for packet matching based on an offset and value. This
is supported via the ethtool user-def option. It is specified by providing
an offset followed by a 2 byte match value. Offset is measured from the
start of the MAC address.
The following restrictions apply to flex-bytes. The specified offset must
be an even number and be smaller than 0x1fe.
Example usage:
ethtool -N eth0 flow-type tcp4 src-ip 192.168.0.55 dst-ip 172.16.0.55 \
src-port 12 dst-port 13 user-def 0x10ffff action 32
Signed-off-by: Henry Tieman <henry.w.tieman@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Three minor fixes, two in drivers, one to fix a hang after reset with
iSCSI, and one to avoid a spurious log message; and the final core one
to correct a suspend/resume miscount with quiesced devices.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCXshxRSYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishSESAP438CQw
i6vSozXyTQkxBMokvxKVvoRLf3jK03z0PvAyfgD7BW4/3CuO1dZVCsQJF62bUoEx
FwMTuWFO2d+Qoeo+3yk=
=VssU
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Three minor fixes, two in drivers, one to fix a hang after reset with
iSCSI, and one to avoid a spurious log message; and the final core one
to correct a suspend/resume miscount with quiesced devices"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: target: Put lun_ref at end of tmr processing
scsi: pm: Balance pm_only counter of request queue during system resume
scsi: qla2xxx: Do not log message when reading port speed via sysfs
vmwgfx:
- change maintainers
- fix redundant assignment
- fix parameter name
- fix return value
etnaviv:
- memory leak fix when userspace passes a invalid softpin address
- off-by-one crashing the kernel in the perfmon domain iteration when
the GPU core has both 2D and 3D capabilities
amdgpu:
- DP fix
- Floating point fix
- Fix cursor stutter issue
-----BEGIN PGP SIGNATURE-----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=1XSD
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-2020-05-23' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Things seemed to have quieten down, though no i915 pull (I even gave
them an extra 12 hours in case they were late).
The amdgpu floating point fix is probably the largest, but it just
moves some code around to it doesn't do fpu stuff outside the fpu
boundaries. Otherwise it's just a couple of vmwgfx fixes (maintainer
change) and two etnaviv fixes.
vmwgfx:
- change maintainers
- fix redundant assignment
- fix parameter name
- fix return value
etnaviv:
- memory leak fix when userspace passes a invalid softpin address
- off-by-one crashing the kernel in the perfmon domain iteration when
the GPU core has both 2D and 3D capabilities
amdgpu:
- DP fix
- Floating point fix
- Fix cursor stutter issue"
* tag 'drm-fixes-2020-05-23' of git://anongit.freedesktop.org/drm/drm:
drm/amd/display: Defer cursor lock until after VUPDATE
drm/amd/display: Remove dml_common_def file
drm/amd/display: DP training to set properly SCRAMBLING_DISABLE
drm/edid: Add Oculus Rift S to non-desktop list
drm/etnaviv: Fix a leak in submit_pin_objects()
drm/etnaviv: fix perfmon domain interation
drm/vmwgfx: Return true in function vmw_fence_obj_signaled()
drm/vmwgfx: remove redundant assignment to variable ret
drm/vmwgfx: Fix parameter name in vmw_bo_init
drm/vmwgfx: update MAINTAINERS entry
Add functionality for ethtool --show-ntuple, allowing for filters to be
displayed when set functionality is added. Add statistics related to
Flow Director matches and status.
Signed-off-by: Henry Tieman <henry.w.tieman@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Flow Director allows for redirection based on ntuple rules. Rules are
programmed using the ethtool set-ntuple interface. Supported actions are
redirect to queue and drop.
Setup the initial framework to process Flow Director filters. Create and
allocate resources to manage and program filters to the hardware. Filters
are processed via a sideband interface; a control VSI is created to manage
communication and process requests through the sideband. Upon allocation of
resources, update the hardware tables to accept perfect filters.
Signed-off-by: Henry Tieman <henry.w.tieman@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
On e.g. m68k, the alignment of 32-bit values is only 2 bytes, leading
to the following:
./include/linux/avf/virtchnl.h:147:36: warning: division by zero [-Wdiv-by-zero]
{ virtchnl_static_assert_##X = (n)/((sizeof(struct X) == (n)) ? 1 : 0) }
^
./include/linux/avf/virtchnl.h:577:1: note: in expansion of macro ‘VIRTCHNL_CHECK_STRUCT_LEN’
VIRTCHNL_CHECK_STRUCT_LEN(272, virtchnl_filter);
^~~~~~~~~~~~~~~~~~~~~~~~~
./include/linux/avf/virtchnl.h:577:32: error: enumerator value for ‘virtchnl_static_assert_virtchnl_filter’ is not an integer constant
VIRTCHNL_CHECK_STRUCT_LEN(272, virtchnl_filter);
^~~~~~~~~~~~~~~
./include/linux/avf/virtchnl.h:147:53: note: in definition of macro ‘VIRTCHNL_CHECK_STRUCT_LEN’
{ virtchnl_static_assert_##X = (n)/((sizeof(struct X) == (n)) ? 1 : 0) }
^
./include/linux/avf/virtchnl.h:147:36: warning: division by zero [-Wdiv-by-zero]
{ virtchnl_static_assert_##X = (n)/((sizeof(struct X) == (n)) ? 1 : 0) }
^
./include/linux/avf/virtchnl.h:619:1: note: in expansion of macro ‘VIRTCHNL_CHECK_STRUCT_LEN’
VIRTCHNL_CHECK_STRUCT_LEN(16, virtchnl_pf_event);
^~~~~~~~~~~~~~~~~~~~~~~~~
./include/linux/avf/virtchnl.h:619:31: error: enumerator value for ‘virtchnl_static_assert_virtchnl_pf_event’ is not an integer constant
VIRTCHNL_CHECK_STRUCT_LEN(16, virtchnl_pf_event);
^~~~~~~~~~~~~~~~~
./include/linux/avf/virtchnl.h:147:53: note: in definition of macro ‘VIRTCHNL_CHECK_STRUCT_LEN’
{ virtchnl_static_assert_##X = (n)/((sizeof(struct X) == (n)) ? 1 : 0) }
^
./include/linux/avf/virtchnl.h:147:36: warning: division by zero [-Wdiv-by-zero]
{ virtchnl_static_assert_##X = (n)/((sizeof(struct X) == (n)) ? 1 : 0) }
^
./include/linux/avf/virtchnl.h:640:1: note: in expansion of macro ‘VIRTCHNL_CHECK_STRUCT_LEN’
VIRTCHNL_CHECK_STRUCT_LEN(12, virtchnl_iwarp_qv_info);
^~~~~~~~~~~~~~~~~~~~~~~~~
./include/linux/avf/virtchnl.h:640:31: error: enumerator value for ‘virtchnl_static_assert_virtchnl_iwarp_qv_info’ is not an integer constant
VIRTCHNL_CHECK_STRUCT_LEN(12, virtchnl_iwarp_qv_info);
^~~~~~~~~~~~~~~~~~~~~~
./include/linux/avf/virtchnl.h:147:53: note: in definition of macro ‘VIRTCHNL_CHECK_STRUCT_LEN’
{ virtchnl_static_assert_##X = (n)/((sizeof(struct X) == (n)) ? 1 : 0) }
^
./include/linux/avf/virtchnl.h:147:36: warning: division by zero [-Wdiv-by-zero]
{ virtchnl_static_assert_##X = (n)/((sizeof(struct X) == (n)) ? 1 : 0) }
^
./include/linux/avf/virtchnl.h:647:1: note: in expansion of macro ‘VIRTCHNL_CHECK_STRUCT_LEN’
VIRTCHNL_CHECK_STRUCT_LEN(16, virtchnl_iwarp_qvlist_info);
^~~~~~~~~~~~~~~~~~~~~~~~~
./include/linux/avf/virtchnl.h:647:31: error: enumerator value for ‘virtchnl_static_assert_virtchnl_iwarp_qvlist_info’ is not an integer constant
VIRTCHNL_CHECK_STRUCT_LEN(16, virtchnl_iwarp_qvlist_info);
^~~~~~~~~~~~~~~~~~~~~~~~~~
./include/linux/avf/virtchnl.h:147:53: note: in definition of macro ‘VIRTCHNL_CHECK_STRUCT_LEN’
{ virtchnl_static_assert_##X = (n)/((sizeof(struct X) == (n)) ? 1 : 0) }
^
Fix this by adding explicit padding to structures with holes.
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Daniel Borkmann says:
====================
pull-request: bpf-next 2020-05-23
The following pull-request contains BPF updates for your *net-next* tree.
We've added 50 non-merge commits during the last 8 day(s) which contain
a total of 109 files changed, 2776 insertions(+), 2887 deletions(-).
The main changes are:
1) Add a new AF_XDP buffer allocation API to the core in order to help
lowering the bar for drivers adopting AF_XDP support. i40e, ice, ixgbe
as well as mlx5 have been moved over to the new API and also gained a
small improvement in performance, from Björn Töpel and Magnus Karlsson.
2) Add getpeername()/getsockname() attach types for BPF sock_addr programs
in order to allow for e.g. reverse translation of load-balancer backend
to service address/port tuple from a connected peer, from Daniel Borkmann.
3) Improve the BPF verifier is_branch_taken() logic to evaluate pointers
being non-NULL, e.g. if after an initial test another non-NULL test on
that pointer follows in a given path, then it can be pruned right away,
from John Fastabend.
4) Larger rework of BPF sockmap selftests to make output easier to understand
and to reduce overall runtime as well as adding new BPF kTLS selftests
that run in combination with sockmap, also from John Fastabend.
5) Batch of misc updates to BPF selftests including fixing up test_align
to match verifier output again and moving it under test_progs, allowing
bpf_iter selftest to compile on machines with older vmlinux.h, and
updating config options for lirc and v6 segment routing helpers, from
Stanislav Fomichev, Andrii Nakryiko and Alan Maguire.
6) Conversion of BPF tracing samples outdated internal BPF loader to use
libbpf API instead, from Daniel T. Lee.
7) Follow-up to BPF kernel test infrastructure in order to fix a flake in
the XDP selftests, from Jesper Dangaard Brouer.
8) Minor improvements to libbpf's internal hashmap implementation, from
Ian Rogers.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Since ME systems do not support SLP_S0 in S0ix state, and S0ix entry
and exit flows may cause errors on them it is best to avoid using
e1000e_s0ix_entry_flow and e1000e_s0ix_exit_flow functions.
This was done by creating a struct of all devices that comes with ME
and by checking if the current device has ME.
Signed-off-by: Vitaly Lifshits <vitaly.lifshits@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Commit b10effb92e ("e1000e: fix buffer overrun while the I219 is
processing DMA transactions") imposes roughly 30% performance penalty.
The commit log states that "Disabling TSO eliminates performance loss
for TCP traffic without a noticeable impact on CPU performance", so
let's disable TSO by default to regain the loss.
CC: stable <stable@vger.kernel.org>
Fixes: b10effb92e ("e1000e: fix buffer overrun while the I219 is processing DMA transactions")
BugLink: https://bugs.launchpad.net/bugs/1802691
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
The hardware may stop working if driver failed to disable ULP mode.
Take the return value of e1000_disable_ulp_lpt_lp() into account, and
pass up the error if it fails.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
igb device gets runtime suspended when there's no link partner. We can't
get correct speed under that state:
$ cat /sys/class/net/enp3s0/speed
1000
In addition to that, an error can also be spotted in dmesg:
[ 385.991957] igb 0000:03:00.0 enp3s0: PCIe link lost
Since device can only be runtime suspended when there's no link partner,
we can skip reading register and let the following logic set speed and
duplex with correct status.
The more generic approach will be wrap get_link_ksettings() with begin()
and complete() callbacks. However, for this particular issue, begin()
calls igb_runtime_resume() , which tries to rtnl_lock() while the lock
is already hold by upper ethtool layer.
So let's take this approach until the igb_runtime_resume() no longer
needs to hold rtnl_lock.
CC: stable <stable@vger.kernel.org>
Suggested-by: Alexander Duyck <alexander.duyck@gmail.com>
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Enable Tidv register, Report Packet Sent, Report Status and
Ethernet CRC flags not in use.
This patch comes to clean up these flags.
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
During igc_down(), we call igc_nfc_rule_exit() which traverse the NFC
rule list disabling filters one by one. Later on in igc_down() flow
we issue an hardware reset which also clear all filters. Since we
already reset the hardware, we don't actually need to disable each
filter manually. In order to simplify the code, this patch removes
igc_nfc_rule() altogether.
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
This patch changes adapter->nfc_rule_lock type from spin_lock to mutex
so we avoid unnecessary busy waiting on lock contention.
A closer look at the execution context of NFC rule API users shows that
all of them run in process context. The API users are: ethtool ops,
igc_configure(), called when interface is brought up by user or reset
workequeue thread, igc_down(), called when interface is brought down,
and igc_remove(), called when driver is unloaded.
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
None of igc_disable_nfc_rule() callers actually check its returning
value. A closer look at why this function would fail shows that the
only situation is when we try to delete an Ethertype or MAC filter that
doesn't exist.
That situation is very unlikely so we can change igc_del_etype_filter()
and igc_del_mac_filter() logic to "if the filter doesn't exist, we are
done", and keep the logic in igc_disable_nfc_rule() callers simple.
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
If we try to overwrite an existing rule with the same filter but
different action, we get EEXIST error as shown below.
$ ethtool -N eth0 flow-type ether dst <MACADDR> action 1 loc 10
$ ethtool -N eth0 flow-type ether dst <MACADDR> action 2 loc 10
rmgr: Cannot insert RX class rule: File exists
The second command is expected to overwrite the previous rule in location
10 and succeed.
This patch fixes igc_ethtool_check_nfc_rule() so it also checks the
rules location. In case they match, the rule under evaluation should not
be considered invalid.
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
If we have RFC rules in adapter->nfc_rule_list when the IGC driver
is unloaded, all rules are leaked. This patch fixes the issue by
introducing the helper igc_flush_nfc_rules() and calling it in
igc_remove(). It also updates igc_set_features() so is reuses the
new helper instead of re-implementing it.
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Current implementation of igc_ethtool_update_nfc_rule() is a bit
convoluted since it handles too many things: rule lookup, deletion
and addition. This patch breaks it into three functions so we simplify
the code and improve code reuse.
Code related to rule lookup is refactored out to a new function called
igc_get_nfc_rule().
Code related to rule addition is refactored out to a new function called
igc_add_nfc_rule(). This function enables the rule in hardware and adds
it to the adapter's list.
Code related to rule deletion is refactored out to a new function called
igc_del_nfc_rule(). This function disables the rule in hardware, removes
it from adapter's list, and deletes it.
As a byproduct of this refactoring, igc_enable_nfc_rule() and
igc_disable_nfc_rule() are moved to igc_main.c since they are not used
in igc_ethtool.c anymore, and igc_restore_nfc_rules() and igc_nfc_rule_
exit() are moved around to avoid forward declaration.
Also, since this patch already touches igc_ethtool_get_nfc_rule(), it
takes the opportunity to remove the 'match_flags' check. Empty flags
are not allowed to be added so no need to check that.
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
When network interface is brought up, the driver re-enables the NFC
rules previously configured. However, this is done in reverse order
the rules were added and hardware filters are configured differently.
For example, consider the following rules:
$ ethtool -N eth0 flow-type ether dst 00:00:00:00:00:AA queue 0
$ ethtool -N eth0 flow-type ether dst 00:00:00:00:00:BB queue 1
$ ethtool -N eth0 flow-type ether dst 00:00:00:00:00:CC queue 2
$ ethtool -N eth0 flow-type ether dst 00:00:00:00:00:DD queue 3
RAL/RAH registers are configure so filter index 1 has address ending
with AA, filter index 2 has address ending in BB, and so on.
If we bring the interface down and up again, RAL/RAH registers are
configured so filter index 1 has address ending in DD, filter index 2
has CC, and so on. IOW, in reverse order we had before bringing the
interface down.
This issue can be fixed by traversing adapter->nfc_rule_list in
backwards when restoring the rules. Since hlist doesn't support
backwards traversal, this patch replaces it by list_head and fixes
igc_restore_nfc_rules() accordingly.
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Multicast MAC addresses are valid address for NFC rules but
igc_add_mac_filter() is currently rejecting them. In fact, the I225
controller doesn't impose any constraint on the address value so this
patch gets rid of the address validation check in MAC filter APIs.
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
When the 'loc' argument is passed in ethtool, the input rule overwrites
any rule present in that location. In this situation we must disable the
old rule otherwise it is left enabled in hardware. This patch fixes
the issue by always calling igc_disable_nfc_rule() when deleting the
old rule, no matter the value of 'input' argument.
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Access to NFC rules stored in adapter->nfc_rule_list is protect by
adapter->nfc_rule_lock. The functions igc_ethtool_get_nfc_rule()
and igc_ethtool_get_nfc_rules() are missing to hold the lock while
accessing rule objects.
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
The 'sw_idx' field from 'struct igc_nfc_rule' is u16 type but it is
assigned an u32 value in igc_ethtool_init_nfc_rule(). This patch changes
'sw_idx' type to u32 so they match. Also, it makes more sense to call
this field 'location' since it holds the NFC rule location.
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Current implementation of igc_ethtool_add_nfc_rule() is quite long and a
bit convoluted so this patch does a code refactoring to improve the
code.
Code related to NFC rule object initialization is refactored out to the
local helper function igc_ethtool_init_nfc_rule(). Likewise, code
related to NFC rule validation is refactored out to another local
helper, igc_ethtool_is_nfc_rule_valid().
RX_CLS_FLOW_DISC check is removed since it is redundant. The macro is
defined as the max value fsp->ring_cookie can have, so checking if
fsp->ring_cookie >= adapter->num_rx_queues is already sufficient.
Finally, some log messages are improved or added, and obvious comments
are removed.
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Currently, if an error occurred during mlx5_function_setup(), we
keep dev->state as DEVICE_STATE_UP.
Fixing it by adding a goto label.
Fixes: e161105e58 ("net/mlx5: Function setup/teardown procedures")
Signed-off-by: Shay Drory <shayd@mellanox.com>
Reviewed-by: Moshe Shemesh <moshe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
The correct way is to us the flow_cls_offload_flow_rule() wrapper
instead of f->rule directly.
Fixes: 4c3844d9e9 ("net/mlx5e: CT: Introduce connection tracking")
Signed-off-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Oz Shlomo <ozsh@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
On sq closure when we free its descriptors, we should also update netdev
txq on completions which would not arrive. Otherwise if we reopen sqs
and attach them back, for example on fw fatal recovery flow, we may get
tx timeout.
Fixes: 29429f3300 ("net/mlx5e: Timeout if SQ doesn't flush during close")
Signed-off-by: Moshe Shemesh <moshe@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Add del_sw_func cb for root ns. Now there is no need to
maintain a case of del_sw_func being null when freeing the node.
Fixes: 2cc43b494a ("net/mlx5_core: Managing root flow table")
Signed-off-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Reviewed-by: Paul Blakey <paulb@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Unmanaged flow tables doesn't have a parent and tree_put_node()
assume there is always a parent if cleaning is needed. fix that.
Fixes: 5281a0c909 ("net/mlx5: fs_core: Introduce unmanaged flow tables")
Signed-off-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Reviewed-by: Paul Blakey <paulb@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Fix memory leak in mlx5_events_init(), in case
create_single_thread_workqueue() fails, events
struct should be freed.
Fixes: 5d3c537f90 ("net/mlx5: Handle event of power detection in the PCIE slot")
Signed-off-by: Moshe Shemesh <moshe@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
In the cited commit inner_tirs argument was added to create and destroy
inner tirs, and no indication was added to mlx5e_modify_tirs_hash()
function. In order to have a consistent handling, use
inner_indir_tir[0].tirn in tirs destroy/modify function as an indication
to whether inner tirs are created.
Inner tirs are not created for representors and before this commit,
a call to mlx5e_modify_tirs_hash() was sending HW commands to
modify non-existent inner tirs.
Fixes: 46dc933cee ("net/mlx5e: Provide explicit directive if to create inner indirect tirs")
Signed-off-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Vlad Buslov <vladbu@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
The TLS TIS object contains the dek/key ID.
By destroying the key first, the TIS would contain an invalid
non-existing key ID.
Reverse the destroy order, this also acheives the desired assymetry
between the destroy and the create flows.
Fixes: d2ead1f360 ("net/mlx5e: Add kTLS TX HW offload support")
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Reviewed-by: Boris Pismenny <borisp@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
After changing the parent_id to be the same for both NICs of same
The cited commit wrongly allow offload of tc redirect flows from
VF to uplink and vice versa when devcies are on different eswitch,
these cases aren't supported by HW.
Disallow the above offloads when devcies are on different eswitch
and VF LAG is not configured.
Fixes: f6dc1264f1 ("net/mlx5e: Disallow tc redirect offload cases we don't support")
Signed-off-by: Maor Dickman <maord@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
When driver is reloading during recovery flow, it can't get new commands
till command interface is up again. Otherwise we may get to null pointer
trying to access non initialized command structures.
Add cmdif state to avoid processing commands while cmdif is not ready.
Fixes: e126ba97db ("mlx5: Add driver for Mellanox Connect-IB adapters")
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Moshe Shemesh <moshe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
After driver creates (via FW command) an EQ for commands, the driver will
be informed on new commands completion by EQE. However, due to a race in
driver's internal command mode metadata update, some new commands will
still be miss-handled by driver as if we are in polling mode. Such commands
can get two non forced completion, leading to already freed command entry
access.
CREATE_EQ command, that maps EQ to the command queue must be posted to the
command queue while it is empty and no other command should be posted.
Add SW mechanism that once the CREATE_EQ command is about to be executed,
all other commands will return error without being sent to the FW. Allow
sending other commands only after successfully changing the driver's
internal command mode metadata.
We can safely return error to all other commands while creating the command
EQ, as all other commands might be sent from the user/application during
driver load. Application can rerun them later after driver's load was
finished.
Fixes: e126ba97db ("mlx5: Add driver for Mellanox Connect-IB adapters")
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Moshe Shemesh <moshe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
When FW response to commands is very slow and all command entries in
use are waiting for completion we can have a race where commands can get
timeout before they get out of the queue and handled. Timeout
completion on uninitialized command will cause releasing command's
buffers before accessing it for initialization and then we will get NULL
pointer exception while trying access it. It may also cause releasing
buffers of another command since we may have timeout completion before
even allocating entry index for this command.
Add entry handling completion to avoid this race.
Fixes: e126ba97db ("mlx5: Add driver for Mellanox Connect-IB adapters")
Signed-off-by: Moshe Shemesh <moshe@mellanox.com>
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Allow to modify ethernet headers while decapsulating mpls over UDP
packets. This is implemented using the same reformat object used for
decapsulation.
Signed-off-by: Eli Cohen <eli@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Paul Blakey <paulb@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
MPLS over UDP is supported in hardware by using a packet reformat object
with reformat type equal L3_TUNNEL_TO_L2 which both decapsulates the
outer L3, L4 and MPLS headers, and allows for setting the L2 headers of
the resulting decapsulated packet. For the hardware to operate
correctly, the configuration of the firmware must have
FLEX_PARSER_PROFILE_ENABLE = 1.
Example tc rule:
tc filter add dev bareudp0 protocol all prio 1 root flower enc_dst_port \
6635 enc_src_ip 8.8.8.23 action mpls pop protocol ip pipe \
action pedit ex munge eth dst set 00:11:22:33:44:21 pipe action \
mirred egress redirect dev enp59s0f0_0
We use pedit to set the correct destination MAC.
For MPLS over UDP decapsulation to take place, the driver logic requires
the following:
1. flower filter added on bareudp device.
2. action mpls pop
3. zero or more pedit munge actions
4. one redirect action
Current implementation supports only IPv4 and no VLAN.
tc filter show output looks like this:
filter protocol all pref 1 flower chain 0
filter protocol all pref 1 flower chain 0 handle 0x1
enc_src_ip 8.8.8.24
enc_dst_port 6635
in_hw in_hw_count 1
action order 1: mpls pop protocol ip pipe
index 2 ref 1 bind 1
action order 2: pedit action pipe keys 2
index 1 ref 1 bind 1
key #0 at eth+0: val 00112233 mask 00000000
key #1 at eth+4: val 44210000 mask 0000ffff
action order 3: mirred (Egress Redirect to device enp59s0f0_0) stolen
index 2 ref 1 bind 1
Signed-off-by: Eli Cohen <eli@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Eli Britstein <elibr@mellanox.com>
Reviewed-by: Vlad Buslov <vladbu@mellanox.com>
Reviewed-by: Paul Blakey <paulb@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Support matching on MPLS over UDP parameters using misc2 section of
match parameters.
Signed-off-by: Eli Cohen <eli@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
MPLS over UDP is supported by adding a rule on a representor net device
which does tunnel_key set, push mpls and forward to a baredup device. At
the hardware level we use a packet_reformat_context object to do the
encapsulation of the packet.
The resulting packet looks as follows (left side transmitted first):
outer L2 | outer IP | UDP | MPLS | inner L3 and data |
Example usage:
tc filter add dev $rep0 protocol ip prio 1 root flower skip_sw \
action tunnel_key set src_ip 8.8.8.21 dst_ip 8.8.8.24 id 555 \
dst_port 6635 tos 4 ttl 6 csum action mpls push protocol 0x8847 \
label 555 tc 3 action mirred egress redirect dev bareudp0
This is how the filter is shown with tc filter show:
tc filter show dev enp59s0f0_0 ingress
filter protocol ip pref 1 flower chain 0
filter protocol ip pref 1 flower chain 0 handle 0x1
eth_type ipv4
skip_sw
in_hw in_hw_count 1
action order 1: tunnel_key set
src_ip 8.8.8.21
dst_ip 8.8.8.24
key_id 555
dst_port 6635
csum
tos 0x4
ttl 6 pipe
index 1 ref 1 bind 1
action order 2: mpls push protocol mpls_uc label 555 tc 3 ttl 255 pipe
index 1 ref 1 bind 1
action order 3: mirred (Egress Redirect to device bareudp0) stolen
index 1 ref 1 bind 1
Signed-off-by: Eli Cohen <eli@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Eli Britstein <elibr@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Add netif_is_bareudp() so the device can be identified as a bareudp one.
Signed-off-by: Eli Cohen <eli@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Eli Britstein <elibr@mellanox.com>
Reviewed-by: Paul Blakey <paulb@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
In order to improve code maintainability and readability, introduce new
CONFIG_MLX5_CLS_ACT kconfig variable to control compilation of TC hardware
offloads implementation. This allows distinguishing between features that
require TC support (MPLSoUDP, etc.) and features that just rely on
representor functionality (rep_bond for live migration, etc.).
Modify rep_tc.h, rep_neigh.h, en_tc.h and chains.h files to provide stubs
for functions that are called from generic code.
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
As a preparation for introducing new kconfig option that controls
compilation of all TC offloads code in mlx5, extract TC-specific code from
en_main.c to en_tc.c. This allows easily compiling out the code by
only including new source in make file when corresponding kconfig is
enabled instead of adding multiple ifdef blocks to en_main.
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
As a preparation for introducing new kconfig option that controls
compilation of all TC offloads code in mlx5, extract neigh-specific code
from en_rep.c to standalone file. This allows easily compiling out the code
by only including new source in make file when corresponding kconfig is
enabled instead of adding multiple ifdef blocks to en_rep.
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
As a preparation for introducing new kconfig option that controls
compilation of all TC offloads code in mlx5, extract TC-specific code from
en_rep.c to standalone file. This allows easily compiling out the code by
only including new source in make file when corresponding kconfig is
enabled instead of adding multiple ifdef blocks to en_rep.
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Use IS_ERR() and PTR_ERR() instead of PTR_ERR_OR_ZERO() to
simplify code, avoid redundant judgements.
Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com>
Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
