Remove the ignored return value from xfs_log_unmount_write, and also
remove a rather pointless assert on the return value from xfs_log_force.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Prior to commit df732b29c8 ("xfs: call xlog_state_release_iclog with
l_icloglock held"), xlog_state_release_iclog() always performed a
locked check of the iclog error state before proceeding into the
sync state processing code. As of this commit, part of
xlog_state_release_iclog() was open-coded into
xfs_log_release_iclog() and as a result the locked error state check
was lost.
The lockless check still exists, but this doesn't account for the
possibility of a race with a shutdown being performed by another
task causing the iclog state to change while the original task waits
on ->l_icloglock. This has reproduced very rarely via generic/475
and manifests as an assert failure in __xlog_state_release_iclog()
due to an unexpected iclog state.
Restore the locked error state check in xlog_state_release_iclog()
to ensure that an iclog state update via shutdown doesn't race with
the iclog release state processing code.
Fixes: df732b29c8 ("xfs: call xlog_state_release_iclog with l_icloglock held")
Reported-by: Zorro Lang <zlang@redhat.com>
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
syzbot (via KASAN) reports a use-after-free in the error path of
xlog_alloc_log(). Specifically, the iclog freeing loop doesn't
handle the case of a fully initialized ->l_iclog linked list.
Instead, it assumes that the list is partially constructed and NULL
terminated.
This bug manifested because there was no possible error scenario
after iclog list setup when the original code was added. Subsequent
code and associated error conditions were added some time later,
while the original error handling code was never updated. Fix up the
error loop to terminate either on a NULL iclog or reaching the end
of the list.
Reported-by: syzbot+c732f8644185de340492@syzkaller.appspotmail.com
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
We can remove it now, without needing to rework the KM_ flags.
Use kmem_cache_free() directly.
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Add some lock annotations to helper functions that seem to have
unbalanced locking that confuses the static analyzers.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Eliminate struct xfs_mount field m_fsname by using the super block s_id
field directly.
Signed-off-by: Ian Kent <raven@themaw.net>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
XLOG_STATE_DO_CALLBACK is only entered through XLOG_STATE_DONE_SYNC
and just used in a single debug check. Remove the flag and thus
simplify the calling conventions for xlog_state_do_callback and
xlog_state_iodone_process_iclog.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
ic_state really is a set of different states, even if the values are
encoded as non-conflicting bits and we sometimes use logical and
operations to check for them. Switch all comparisms to check for
exact values (and use switch statements in a few places to make it
more clear) and turn the values into an implicitly enumerated enum
type.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
XFSERRORDEBUG is never set and the code isn't all that useful, so remove
it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
All but one caller of xlog_state_release_iclog hold l_icloglock and need
to drop and reacquire it to call xlog_state_release_iclog. Switch the
xlog_state_release_iclog calling conventions to expect the lock to be
held, and open code the logic (using a shared helper) in the only
remaining caller that does not have the lock (and where not holding it
is a nice performance optimization). Also move the refactored code to
require the least amount of forward declarations.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
[darrick: minor whitespace cleanup]
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
This will allow optimizing various locking cycles in the following
patches.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
ic_io_size is only used inside xlog_write_iclog, where we can just use
the count parameter intead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
xlog_write_iclog expects a bool for the second argument. While any
non-0 value happens to work fine this makes all calls consistent.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Guarantee zeroed memory buffers for cases where potential memory
leak to disk can occur. In these cases, kmem_alloc is used and
doesn't zero the buffer, opening the possibility of information
leakage to disk.
Use existing infrastucture (xfs_buf_allocate_memory) to obtain
the already zeroed buffer from kernel memory.
This solution avoids the performance issue that would occur if a
wholesale change to replace kmem_alloc with kmem_zalloc was done.
Signed-off-by: Bill O'Donnell <billodo@redhat.com>
[darrick: fix bitwise complaint about kmflag_mask]
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
When the log fills up, we can get into the state where the
outstanding items in the CIL being committed and aggregated are
larger than the range that the reservation grant head tail pushing
will attempt to clean. This can result in the tail pushing range
being trimmed back to the the log head (l_last_sync_lsn) and so
may not actually move the push target at all.
When the iclogs associated with the CIL commit finally land, the
log head moves forward, and this removes the restriction on the AIL
push target. However, if we already have transactions sleeping on
the grant head, and there's nothing in the AIL still to flush from
the current push target, then nothing will move the tail of the log
and trigger a log reservation wakeup.
Hence the there is nothing that will trigger xlog_grant_push_ail()
to recalculate the AIL push target and start pushing on the AIL
again to write back the metadata objects that pin the tail of the
log and hence free up space and allow the transaction reservations
to be woken and make progress.
Hence we need to push on the grant head when we move the log head
forward, as this may be the only trigger we have that can move the
AIL push target forwards in this situation.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
xlog_state_clean_log() is only called from one place, and it occurs
when an iclog is transitioning back to ACTIVE. Prior to calling
xlog_state_clean_log, the iclog we are processing has a hard coded
state check to DIRTY so that xlog_state_clean_log() processes it
correctly. We also have a hard coded wakeup after
xlog_state_clean_log() to enfore log force waiters on that iclog
are woken correctly.
Both of these things are operations required to finish processing an
iclog and return it to the ACTIVE state again, so they make little
sense to be separated from the rest of the clean state transition
code.
Hence push these things inside xlog_state_clean_log(), document the
behaviour and rename it xlog_state_clean_iclog() to indicate that
it's being driven by an iclog state change and does the iclog state
change work itself.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The iclog IO completion state processing is somewhat complex, and
because it's inside two nested loops it is highly indented and very
hard to read. Factor it out, flatten the logic flow and clean up the
comments so that it much easier to see what the code is doing both
in processing the individual iclogs and in the over
xlog_state_do_callback() operation.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Simplify the code flow by lifting the iclog callback work out of
the main iclog iteration loop. This isolates the log juggling and
callbacks from the iclog state change logic in the loop.
Note that the loopdidcallbacks variable is not actually tracking
whether callbacks are actually run - it is tracking whether the
icloglock was dropped during the loop and so determines if we
completed the entire iclog scan loop atomically. Hence we know for
certain there are either no more ordered completions to run or
that the next completion will run the remaining ordered iclog
completions. Hence rename that variable appropriately for it's
function.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Start making this function readable by lifting the debug code into
a conditional function.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The code in xlog_wait uses the spinlock to make adding the task to
the wait queue, and setting the task state to UNINTERRUPTIBLE atomic
with respect to the waker.
Doing the wakeup after releasing the spinlock opens up the following
race condition:
Task 1 task 2
add task to wait queue
wake up task
set task state to UNINTERRUPTIBLE
This issue was found through code inspection as a result of kworkers
being observed stuck in UNINTERRUPTIBLE state with an empty
wait queue. It is rare and largely unreproducable.
Simply moving the spin_unlock to after the wake_up_all results
in the waker not being able to see a task on the waitqueue before
it has set its state to UNINTERRUPTIBLE.
This bug dates back to the conversion of this code to generic
waitqueue infrastructure from a counting semaphore back in 2008
which didn't place the wakeups consistently w.r.t. to the relevant
spin locks.
[dchinner: Also fix a similar issue in the shutdown path on
xc_commit_wait. Update commit log with more details of the issue.]
Fixes: d748c62367 ("[XFS] Convert l_flushsema to a sv_t")
Reported-by: Chris Mason <clm@fb.com>
Signed-off-by: Rik van Riel <riel@surriel.com>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
In the situation where the log is full and the CIL has not recently
flushed, the AIL push threshold is throttled back to the where the
last write of the head of the log was completed. This is stored in
log->l_last_sync_lsn. Hence if the CIL holds > 25% of the log space
pinned by flushes and/or aggregation in progress, we can get the
situation where the head of the log lags a long way behind the
reservation grant head.
When this happens, the AIL push target is trimmed back from where
the reservation grant head wants to push the log tail to, back to
where the head of the log currently is. This means the push target
doesn't reach far enough into the log to actually move the tail
before the transaction reservation goes to sleep.
When the CIL push completes, it moves the log head forward such that
the AIL push target can now be moved, but that has no mechanism for
puhsing the log tail. Further, if the next tail movement of the log
is not large enough wake the waiter (i.e. still not enough space for
it to have a reservation granted), we don't wake anything up, and
hence we do not update the AIL push target to take into account the
head of the log moving and allowing the push target to be moved
forwards.
To avoid this particular condition, if we fail to wake the first
waiter on the grant head because we don't have enough space,
push on the AIL again. This will pick up any movement of the log
head and allow the push target to move forward due to completion of
CIL pushing.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Memory we use to submit for IO needs strict alignment to the
underlying driver contraints. Worst case, this is 512 bytes. Given
that all allocations for IO are always a power of 2 multiple of 512
bytes, the kernel heap provides natural alignment for objects of
these sizes and that suffices.
Until, of course, memory debugging of some kind is turned on (e.g.
red zones, poisoning, KASAN) and then the alignment of the heap
objects is thrown out the window. Then we get weird IO errors and
data corruption problems because drivers don't validate alignment
and do the wrong thing when passed unaligned memory buffers in bios.
TO fix this, introduce kmem_alloc_io(), which will guaranteeat least
512 byte alignment of buffers for IO, even if memory debugging
options are turned on. It is assumed that the minimum allocation
size will be 512 bytes, and that sizes will be power of 2 mulitples
of 512 bytes.
Use this everywhere we allocate buffers for IO.
This no longer fails with log recovery errors when KASAN is enabled
due to the brd driver not handling unaligned memory buffers:
# mkfs.xfs -f /dev/ram0 ; mount /dev/ram0 /mnt/test
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Since no caller is using KM_NOSLEEP and no callee branches on KM_SLEEP,
we can remove KM_NOSLEEP and replace KM_SLEEP with 0.
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
When the system is close-to-OOM, fsync() may fail due to -ENOMEM because
xfs_log_reserve() is using KM_MAYFAIL. It is a bad thing to fail writeback
operation due to user-triggerable OOM condition. Since we are not using
KM_MAYFAIL at xfs_trans_alloc() before calling xfs_log_reserve(), let's
use the same flags at xfs_log_reserve().
oom-torture: page allocation failure: order:0, mode:0x46c40(GFP_NOFS|__GFP_NOWARN|__GFP_RETRY_MAYFAIL|__GFP_COMP), nodemask=(null)
CPU: 7 PID: 1662 Comm: oom-torture Kdump: loaded Not tainted 5.3.0-rc2+ #925
Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00
Call Trace:
dump_stack+0x67/0x95
warn_alloc+0xa9/0x140
__alloc_pages_slowpath+0x9a8/0xbce
__alloc_pages_nodemask+0x372/0x3b0
alloc_slab_page+0x3a/0x8d0
new_slab+0x330/0x420
___slab_alloc.constprop.94+0x879/0xb00
__slab_alloc.isra.89.constprop.93+0x43/0x6f
kmem_cache_alloc+0x331/0x390
kmem_zone_alloc+0x9f/0x110 [xfs]
kmem_zone_alloc+0x9f/0x110 [xfs]
xlog_ticket_alloc+0x33/0xd0 [xfs]
xfs_log_reserve+0xb4/0x410 [xfs]
xfs_trans_reserve+0x1d1/0x2b0 [xfs]
xfs_trans_alloc+0xc9/0x250 [xfs]
xfs_setfilesize_trans_alloc.isra.27+0x44/0xc0 [xfs]
xfs_submit_ioend.isra.28+0xa5/0x180 [xfs]
xfs_vm_writepages+0x76/0xa0 [xfs]
do_writepages+0x17/0x80
__filemap_fdatawrite_range+0xc1/0xf0
file_write_and_wait_range+0x53/0xa0
xfs_file_fsync+0x87/0x290 [xfs]
vfs_fsync_range+0x37/0x80
do_fsync+0x38/0x60
__x64_sys_fsync+0xf/0x20
do_syscall_64+0x4a/0x1c0
entry_SYSCALL_64_after_hwframe+0x49/0xbe
Fixes: eb01c9cd87 ("[XFS] Remove the xlog_ticket allocator")
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Change return types of below functions as they never fails
xfs_log_mount_cancel
xlog_recover_cancel
xlog_recover_cancel_intents
fix below issue reported by coccicheck
fs/xfs/xfs_log_recover.c:4886:7-12: Unneeded variable: "error". Return
"0" on line 4926
Signed-off-by: Hariprasad Kelam <hariprasad.kelam@gmail.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Properly allocate the space for the bio_vecs instead of just one byte
per bio_vec.
Fixes: 79b54d9bfc ("xfs: use bios directly to write log buffers")
Reported-by: syzbot+b75afdbe271a0d7ac4f6@syzkaller.appspotmail.com
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
There are many, many xfs header files which are included but
unneeded (or included twice) in the xfs code, so remove them.
nb: xfs_linux.h includes about 9 headers for everyone, so those
explicit includes get removed by this. I'm not sure what the
preference is, but if we wanted explicit includes everywhere,
a followup patch could remove those xfs_*.h includes from
xfs_linux.h and move them into the files that need them.
Or it could be left as-is.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Replace the hand grown linked list handling and cil context attachment
with the standard list_head structure.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Just pass a straight bool aborted instead of abusing XFS_LI_ABORTED as a
flag in function parameters.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Move the workqueue used for log I/O completions from struct xfs_mount
to struct xlog to keep it self contained in the log code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
[darrick: destroy the log workqueue after ensuring log ios are done]
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Currently the XFS logging code uses the xfs_buf structure and
associated APIs to write the log buffers to disk. This requires
various special cases in the log code and is generally not very
optimal.
Instead of using a buffer just allocate a kmem_alloc_larger region for
each log buffer, and use a bio and bio_vec array embedded in the iclog
structure to write the buffer to disk. This also allows for using
the bio split and chaining case to deal with the case of a log
buffer wrapping around the end of the log.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
[darrick: don't split if/else with an #endif]
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Use the slightly shorter way to get at the buftarg for the log device
wherever we can in the log and log recovery code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The only caller unconditionally passes true here.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Just a small bit of code tidying up.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Split out another self-contained bit of code from xlog_sync.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Split out a self-contained chunk of code from xlog_sync that calculates
the split offset for an iclog that wraps the log end and bumps the
cycles for the second half.
Use the chance to bring some sanity to the variables used to track the
split in xlog_sync by not changing the count variable, and instead use
split as the offset for the split and use those to calculate the
sizes and offsets for the two write buffers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Replace the not very useful xlog_bdstrat wrapper with a new version that
that takes care of all the common logic for writing log buffers. Use
the opportunity to avoid overloading the buffer address with the log
relative address, and to shed the unused return value.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
If we have to split a log write because it wraps the end of the log we
can't just use REQ_PREFLUSH to flush before the first log write,
as the writes might get reordered somewhere in the I/O stack. Issue
a manual flush in that case so that the ordering of the two log I/Os
doesn't matter.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
This value is the only flag in ic_state, which we otherwise use as
a state. Switch it to a new debug-only field and also report and
actual error in the buffer in the I/O completion path.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reformat xlog_get_lowest_lsn to our usual style.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
We don't really need all the messy branches in the function, as it
really does three things, out of which 2 are common for all branches:
1) set up mount point log buffer size and count values if not already
done from mount options
2) calculate the number of log headers
3) set up all the values in struct xlog based on the above
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
This field is never used, so we can simply kill it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
xlog_print_tic_res() is supposed to print a human readable string for
each element of the log ticket reservation array. Unfortunately, I
forgot to update the string array when we added rmap & reflink support,
so the debug message prints "region[3]: (null) - 352 bytes" which isn't
useful at all. Add the missing elements and add a build check so that
we don't forget again to add a string when adding a new XLOG_REG_TYPE.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Replace the BAD_SUMMARY mount flag with calls to the equivalent health
tracking code.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Fix the comment in xfs_log_reserve to avoid confusing.
Signed-of-by: Huang Chong <huang.chong@zte.com.cn>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Add a predicate to decide if the log is actively in recovery and use
that instead of open-coding a pagf_init check in the attr leaf verifier.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Use the "bad summary count" mount flag from the previous patch to skip
writing the unmount record to force log recovery at the next mount,
which will recalculate the summary counters for us.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Refactor the writing of the unmount record into a separate helper. No
functionality changes.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Get rid of the MIN/MAX macros and just use the native min/max macros
directly in the XFS code.
Signed-Off-By: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
