First of all there is no point in looking up the irq descriptor again, but we
also need the descriptor for the final cleanup race fix in the next
patch. Make that change seperate. No functional difference.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Borislav Petkov <bp@alien8.de>
Tested-by: Joe Lawrence <joe.lawrence@stratus.com>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Jeremiah Mahler <jmmahler@gmail.com>
Cc: andy.shevchenko@gmail.com
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: stable@vger.kernel.org #4.3+
Link: http://lkml.kernel.org/r/20151231160107.125211743@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
In fixup_irqs() we unconditionally dereference the irq chip of an irq
descriptor. The descriptor might still be valid, but already cleaned up,
i.e. the chip removed. Add a check for this condition.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Joe Lawrence <joe.lawrence@stratus.com>
Cc: Jeremiah Mahler <jmmahler@gmail.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: andy.shevchenko@gmail.com
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: stable@vger.kernel.org #4.3+
Link: http://lkml.kernel.org/r/20151231160106.236423282@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Pull x86 apic updates from Thomas Gleixner:
"This udpate contains:
- rework the irq vector array to store a pointer to the irq
descriptor instead of the irq number to avoid a lookup of the irq
descriptor in the irq entry path
- lguest interrupt handling cleanups
- conversion of the local apic timer to the new clockevent callbacks
- preparatory changes for the irq argument removal of interrupt flow
handlers"
* 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/irq: Do not dereference irq descriptor before checking it
tools/lguest: Clean up include dir
tools/lguest: Fix redefinition of struct virtio_pci_cfg_cap
x86/irq: Store irq descriptor in vector array
genirq: Provide irq_desc_has_action
x86/irq: Get rid of an indentation level
x86/irq: Rename VECTOR_UNDEFINED to VECTOR_UNUSED
x86/irq: Replace numeric constant
x86/irq: Protect smp_cleanup_move
x86/lguest: Do not setup unused irq vectors
x86/lguest: Clean up lguest_setup_irq
x86/apic: Drop local_irq_save/restore in timer callbacks
x86/apic: Migrate apic timer to new set_state interface
x86/irq: Use access helper irq_data_get_affinity_mask()
x86/irq: Use accessor irq_data_get_irq_handler_data()
x86/irq: Use accessor irq_data_get_node()
Pull x86 irq fixlet from Ingo Molnar:
"A single change that hides the 'HYP:' line in /proc/interrupts when
it's unused"
* 'x86-irq-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/irq: Hide 'HYP:' line in /proc/interrupts when not on Xen/Hyper-V
Pull x86 asm changes from Ingo Molnar:
"The biggest changes in this cycle were:
- Revamp, simplify (and in some cases fix) Time Stamp Counter (TSC)
primitives. (Andy Lutomirski)
- Add new, comprehensible entry and exit handlers written in C.
(Andy Lutomirski)
- vm86 mode cleanups and fixes. (Brian Gerst)
- 32-bit compat code cleanups. (Brian Gerst)
The amount of simplification in low level assembly code is already
palpable:
arch/x86/entry/entry_32.S | 130 +----
arch/x86/entry/entry_64.S | 197 ++-----
but more simplifications are planned.
There's also the usual laudry mix of low level changes - see the
changelog for details"
* 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (83 commits)
x86/asm: Drop repeated macro of X86_EFLAGS_AC definition
x86/asm/msr: Make wrmsrl() a function
x86/asm/delay: Introduce an MWAITX-based delay with a configurable timer
x86/asm: Add MONITORX/MWAITX instruction support
x86/traps: Weaken context tracking entry assertions
x86/asm/tsc: Add rdtscll() merge helper
selftests/x86: Add syscall_nt selftest
selftests/x86: Disable sigreturn_64
x86/vdso: Emit a GNU hash
x86/entry: Remove do_notify_resume(), syscall_trace_leave(), and their TIF masks
x86/entry/32: Migrate to C exit path
x86/entry/32: Remove 32-bit syscall audit optimizations
x86/vm86: Rename vm86->v86flags and v86mask
x86/vm86: Rename vm86->vm86_info to user_vm86
x86/vm86: Clean up vm86.h includes
x86/vm86: Move the vm86 IRQ definitions to vm86.h
x86/vm86: Use the normal pt_regs area for vm86
x86/vm86: Eliminate 'struct kernel_vm86_struct'
x86/vm86: Move fields from 'struct kernel_vm86_struct' to 'struct vm86'
x86/vm86: Move vm86 fields out of 'thread_struct'
...
We can spare the irq_desc lookup in the interrupt entry code if we
store the descriptor pointer in the vector array instead the interrupt
number.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Link: http://lkml.kernel.org/r/20150802203609.717724106@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Make the code simpler to read.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Link: http://lkml.kernel.org/r/20150802203609.555253675@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
VECTOR_UNDEFINED is a misnomer. The vector is defined, but unused.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Link: http://lkml.kernel.org/r/20150802203609.477282494@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Use the proper define instead of 0.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Link: http://lkml.kernel.org/r/20150802203609.385495420@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This is a preparatory patch for moving irq_data struct members.
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Hypervisor callback interrupts are only accounted on
Xen/Hyper-V. There is no point in having always-zero HYP: line
on other hypervisors or bare metal. Print the line only if
HYPERVISOR_CALLBACK_VECTOR was allocated.
Reported-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: Andrew Jones <drjones@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1436286373-11908-1-git-send-email-vkuznets@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
irq_data is protected by irq_desc->lock, so retrieving the irq chip
from irq_data outside the lock is racy vs. an concurrent update. Move
it into the lock held region.
While at it add a comment why the vector walk does not require
vector_lock.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: xiao jin <jin.xiao@intel.com>
Cc: Joerg Roedel <jroedel@suse.de>
Cc: Borislav Petkov <bp@suse.de>
Cc: Yanmin Zhang <yanmin_zhang@linux.intel.com>
Link: http://lkml.kernel.org/r/20150705171102.331320612@linutronix.de
It's unsafe to examine fields in the irq descriptor w/o holding the
descriptor lock. Add proper locking.
While at it add a comment why the vector check can run lock less
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: xiao jin <jin.xiao@intel.com>
Cc: Joerg Roedel <jroedel@suse.de>
Cc: Borislav Petkov <bp@suse.de>
Cc: Yanmin Zhang <yanmin_zhang@linux.intel.com>
Link: http://lkml.kernel.org/r/20150705171102.236544164@linutronix.de
Currently, we use a global vector as the Posted-Interrupts
Notification Event for all the vCPUs in the system. We need
to introduce another global vector for VT-d Posted-Interrtups,
which will be used to wakeup the sleep vCPU when an external
interrupt from a direct-assigned device happens for that vCPU.
[ tglx: Removed a gazillion of extra newlines ]
Signed-off-by: Feng Wu <feng.wu@intel.com>
Cc: jiang.liu@linux.intel.com
Link: http://lkml.kernel.org/r/1432026437-16560-4-git-send-email-feng.wu@intel.com
Suggested-by: Yang Zhang <yang.z.zhang@intel.com>
Acked-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Deferred errors indicate error conditions that were not corrected, but
require no action from S/W (or action is optional).These errors provide
info about a latent UC MCE that can occur when a poisoned data is
consumed by the processor.
Processors that report these errors can be configured to generate APIC
interrupts to notify OS about the error.
Provide an interrupt handler in this patch so that OS can catch these
errors as and when they happen. Currently, we simply log the errors and
exit the handler as S/W action is not mandated.
Signed-off-by: Aravind Gopalakrishnan <Aravind.Gopalakrishnan@amd.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: x86-ml <x86@kernel.org>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/1430913538-1415-5-git-send-email-Aravind.Gopalakrishnan@amd.com
Signed-off-by: Borislav Petkov <bp@suse.de>
When an interrupt is migrated away from a cpu it will stay
in its vector_irq array until smp_irq_move_cleanup_interrupt
succeeded. The cfg->move_in_progress flag is cleared already
when the IPI was sent.
When the interrupt is destroyed after migration its 'struct
irq_desc' is freed and the vector_irq arrays are cleaned up.
But since cfg->move_in_progress is already 0 the references
at cpus before the last migration will not be cleared. So
this would leave a reference to an already destroyed irq
alive.
When the cpu is taken down at this point, the
check_irq_vectors_for_cpu_disable() function finds a valid irq
number in the vector_irq array, but gets NULL for its
descriptor and dereferences it, causing a kernel panic.
This has been observed on real systems at shutdown. Add a
check to check_irq_vectors_for_cpu_disable() for a valid
'struct irq_desc' to prevent this issue.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Jiang Liu <jiang.liu@linux.intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jan Beulich <JBeulich@suse.com>
Cc: K. Y. Srinivasan <kys@microsoft.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: alnovak@suse.com
Cc: joro@8bytes.org
Link: http://lkml.kernel.org/r/20150204132754.GA10078@suse.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull x86 irq fixes from Ingo Molnar:
"Two changes: a cpu-hotplug/irq race fix, plus a HyperV related fix"
* 'x86-irq-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/irq: Fix fixup_irqs() error handling
x86, irq, pic: Probe for legacy PIC and set legacy_pic appropriately
check_irq_vectors_for_cpu_disable() can overestimate the number of
available interrupt vectors, so the check for cpu down succeeds, but
the actual cpu removal fails.
It iterates from FIRST_EXTERNAL_VECTOR to NR_VECTORS, which is wrong
because the systems vectors are not taken into account.
Limit the search to first_system_vector instead of NR_VECTORS.
The second indicator for vector availability the used_vectors bitmap
is not taken into account at all. So system vectors,
e.g. IA32_SYSCALL_VECTOR (0x80) and IRQ_MOVE_CLEANUP_VECTOR (0x20),
are accounted as available.
Add a check for the used_vectors bitmap and do not account vectors
which are marked there.
[ tglx: Simplified code. Rewrote changelog and code comments. ]
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Acked-by: Prarit Bhargava <prarit@redhat.com>
Cc: Seiji Aguchi <seiji.aguchi@hds.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: K. Y. Srinivasan <kys@microsoft.com>
Cc: Steven Rostedt (Red Hat) <rostedt@goodmis.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: "Elliott, Robert (Server Storage)" <Elliott@hp.com>
Cc: x86@kernel.org
Link: http://lkml.kernel.org/r/1400160305-17774-2-git-send-email-prarit@redhat.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Several patches to fix cpu hotplug and the down'd cpu's irq
relocations have been submitted in the past month or so. The
patches should resolve the problems with cpu hotplug and irq
relocation, however, there is always a possibility that a bug
still exists. The big problem with debugging these irq
reassignments is that the cpu down completes and then we get
random stack traces from drivers for which irqs have not been
properly assigned to a new cpu. The stack traces are a mix of
storage, network, and other kernel subsystem (I once saw the
serial port stop working ...) warnings and failures.
The problem with these failures is that they are difficult to
diagnose. There is no warning in the cpu hotplug down path to
indicate that an IRQ has failed to be assigned to a new cpu, and
all we are left with is a stack trace from a driver, or a
non-functional device. If we had some information on the
console debugging these situations would be much easier; after
all we can map an IRQ to a device by simply using lspci or
/proc/interrupts.
The current code, fixup_irqs(), which migrates IRQs from the
down'd cpu and is called close to the end of the cpu down path,
calls chip->set_irq_affinity which eventually calls
__assign_irq_vector(). Errors are not propogated back from this
function call and this results in silent irq relocation
failures.
This patch fixes this issue by returning the error codes up the
call stack and prints out a warning if there is a relocation
failure.
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Rui Wang <rui.y.wang@intel.com>
Cc: Liu Ping Fan <kernelfans@gmail.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Yoshihiro YUNOMAE <yoshihiro.yunomae.ez@hitachi.com>
Cc: Lv Zheng <lv.zheng@intel.com>
Cc: Seiji Aguchi <seiji.aguchi@hds.com>
Cc: Yang Zhang <yang.z.zhang@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Steven Rostedt (Red Hat) <rostedt@goodmis.org>
Cc: Li Fei <fei.li@intel.com>
Cc: gong.chen@linux.intel.com
Link: http://lkml.kernel.org/r/1396440673-18286-1-git-send-email-prarit@redhat.com
[ Made small cleanliness tweaks. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
HyperV abuses a device interrupt to account for the
HYPERVISOR_CALLBACK_VECTOR.
Provide proper accounting as we have for the other vectors as well.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: K. Y. Srinivasan <kys@microsoft.com>
Cc: x86 <x86@kernel.org>
Link: http://lkml.kernel.org/r/20140223212738.681855582@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Further discussion here: http://marc.info/?l=linux-kernel&m=139073901101034&w=2
kbuild, 0day kernel build service, outputs the warning:
arch/x86/kernel/irq.c:333:1: warning: the frame size of 2056 bytes
is larger than 2048 bytes [-Wframe-larger-than=]
because check_irq_vectors_for_cpu_disable() allocates two cpumasks on the
stack. Fix this by moving the two cpumasks to a global file context.
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Tested-by: David Rientjes <rientjes@google.com>
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Link: http://lkml.kernel.org/r/1390915331-27375-1-git-send-email-prarit@redhat.com
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Seiji Aguchi <seiji.aguchi@hds.com>
Cc: Yang Zhang <yang.z.zhang@Intel.com>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Janet Morgan <janet.morgan@intel.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Ruiv Wang <ruiv.wang@gmail.com>
Cc: Gong Chen <gong.chen@linux.intel.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Pull leftover x86 fixes from Ingo Molnar:
"Two leftover fixes that did not make it into v3.13"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86: Add check for number of available vectors before CPU down
x86, cpu, amd: Add workaround for family 16h, erratum 793
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=64791
When a cpu is downed on a system, the irqs on the cpu are assigned to
other cpus. It is possible, however, that when a cpu is downed there
aren't enough free vectors on the remaining cpus to account for the
vectors from the cpu that is being downed.
This results in an interesting "overflow" condition where irqs are
"assigned" to a CPU but are not handled.
For example, when downing cpus on a 1-64 logical processor system:
<snip>
[ 232.021745] smpboot: CPU 61 is now offline
[ 238.480275] smpboot: CPU 62 is now offline
[ 245.991080] ------------[ cut here ]------------
[ 245.996270] WARNING: CPU: 0 PID: 0 at net/sched/sch_generic.c:264 dev_watchdog+0x246/0x250()
[ 246.005688] NETDEV WATCHDOG: p786p1 (ixgbe): transmit queue 0 timed out
[ 246.013070] Modules linked in: lockd sunrpc iTCO_wdt iTCO_vendor_support sb_edac ixgbe microcode e1000e pcspkr joydev edac_core lpc_ich ioatdma ptp mdio mfd_core i2c_i801 dca pps_core i2c_core wmi acpi_cpufreq isci libsas scsi_transport_sas
[ 246.037633] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.12.0+ #14
[ 246.044451] Hardware name: Intel Corporation S4600LH ........../SVRBD-ROW_T, BIOS SE5C600.86B.01.08.0003.022620131521 02/26/2013
[ 246.057371] 0000000000000009 ffff88081fa03d40 ffffffff8164fbf6 ffff88081fa0ee48
[ 246.065728] ffff88081fa03d90 ffff88081fa03d80 ffffffff81054ecc ffff88081fa13040
[ 246.074073] 0000000000000000 ffff88200cce0000 0000000000000040 0000000000000000
[ 246.082430] Call Trace:
[ 246.085174] <IRQ> [<ffffffff8164fbf6>] dump_stack+0x46/0x58
[ 246.091633] [<ffffffff81054ecc>] warn_slowpath_common+0x8c/0xc0
[ 246.098352] [<ffffffff81054fb6>] warn_slowpath_fmt+0x46/0x50
[ 246.104786] [<ffffffff815710d6>] dev_watchdog+0x246/0x250
[ 246.110923] [<ffffffff81570e90>] ? dev_deactivate_queue.constprop.31+0x80/0x80
[ 246.119097] [<ffffffff8106092a>] call_timer_fn+0x3a/0x110
[ 246.125224] [<ffffffff8106280f>] ? update_process_times+0x6f/0x80
[ 246.132137] [<ffffffff81570e90>] ? dev_deactivate_queue.constprop.31+0x80/0x80
[ 246.140308] [<ffffffff81061db0>] run_timer_softirq+0x1f0/0x2a0
[ 246.146933] [<ffffffff81059a80>] __do_softirq+0xe0/0x220
[ 246.152976] [<ffffffff8165fedc>] call_softirq+0x1c/0x30
[ 246.158920] [<ffffffff810045f5>] do_softirq+0x55/0x90
[ 246.164670] [<ffffffff81059d35>] irq_exit+0xa5/0xb0
[ 246.170227] [<ffffffff8166062a>] smp_apic_timer_interrupt+0x4a/0x60
[ 246.177324] [<ffffffff8165f40a>] apic_timer_interrupt+0x6a/0x70
[ 246.184041] <EOI> [<ffffffff81505a1b>] ? cpuidle_enter_state+0x5b/0xe0
[ 246.191559] [<ffffffff81505a17>] ? cpuidle_enter_state+0x57/0xe0
[ 246.198374] [<ffffffff81505b5d>] cpuidle_idle_call+0xbd/0x200
[ 246.204900] [<ffffffff8100b7ae>] arch_cpu_idle+0xe/0x30
[ 246.210846] [<ffffffff810a47b0>] cpu_startup_entry+0xd0/0x250
[ 246.217371] [<ffffffff81646b47>] rest_init+0x77/0x80
[ 246.223028] [<ffffffff81d09e8e>] start_kernel+0x3ee/0x3fb
[ 246.229165] [<ffffffff81d0989f>] ? repair_env_string+0x5e/0x5e
[ 246.235787] [<ffffffff81d095a5>] x86_64_start_reservations+0x2a/0x2c
[ 246.242990] [<ffffffff81d0969f>] x86_64_start_kernel+0xf8/0xfc
[ 246.249610] ---[ end trace fb74fdef54d79039 ]---
[ 246.254807] ixgbe 0000:c2:00.0 p786p1: initiating reset due to tx timeout
[ 246.262489] ixgbe 0000:c2:00.0 p786p1: Reset adapter
Last login: Mon Nov 11 08:35:14 from 10.18.17.119
[root@(none) ~]# [ 246.792676] ixgbe 0000:c2:00.0 p786p1: detected SFP+: 5
[ 249.231598] ixgbe 0000:c2:00.0 p786p1: NIC Link is Up 10 Gbps, Flow Control: RX/TX
[ 246.792676] ixgbe 0000:c2:00.0 p786p1: detected SFP+: 5
[ 249.231598] ixgbe 0000:c2:00.0 p786p1: NIC Link is Up 10 Gbps, Flow Control: RX/TX
(last lines keep repeating. ixgbe driver is dead until module reload.)
If the downed cpu has more vectors than are free on the remaining cpus on the
system, it is possible that some vectors are "orphaned" even though they are
assigned to a cpu. In this case, since the ixgbe driver had a watchdog, the
watchdog fired and notified that something was wrong.
This patch adds a function, check_vectors(), to compare the number of vectors
on the CPU going down and compares it to the number of vectors available on
the system. If there aren't enough vectors for the CPU to go down, an
error is returned and propogated back to userspace.
v2: Do not need to look at percpu irqs
v3: Need to check affinity to prevent counting of MSIs in IOAPIC Lowest
Priority Mode
v4: Additional changes suggested by Gong Chen.
v5/v6/v7/v8: Updated comment text
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Link: http://lkml.kernel.org/r/1389613861-3853-1-git-send-email-prarit@redhat.com
Reviewed-by: Gong Chen <gong.chen@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Seiji Aguchi <seiji.aguchi@hds.com>
Cc: Yang Zhang <yang.z.zhang@Intel.com>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Janet Morgan <janet.morgan@intel.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Ruiv Wang <ruiv.wang@gmail.com>
Cc: Gong Chen <gong.chen@linux.intel.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Cc: <stable@vger.kernel.org>
During heavy CPU-hotplug operations the following spurious kernel warnings
can trigger:
do_IRQ: No ... irq handler for vector (irq -1)
[ See: https://bugzilla.kernel.org/show_bug.cgi?id=64831 ]
When downing a cpu it is possible that there are unhandled irqs
left in the APIC IRR register. The following code path shows
how the problem can occur:
1. CPU 5 is to go down.
2. cpu_disable() on CPU 5 executes with interrupt flag cleared
by local_irq_save() via stop_machine().
3. IRQ 12 asserts on CPU 5, setting IRR but not ISR because
interrupt flag is cleared (CPU unabled to handle the irq)
4. IRQs are migrated off of CPU 5, and the vectors' irqs are set
to -1. 5. stop_machine() finishes cpu_disable()
6. cpu_die() for CPU 5 executes in normal context.
7. CPU 5 attempts to handle IRQ 12 because the IRR is set for
IRQ 12. The code attempts to find the vector's IRQ and cannot
because it has been set to -1. 8. do_IRQ() warning displays
warning about CPU 5 IRQ 12.
I added a debug printk to output which CPU & vector was
retriggered and discovered that that we are getting bogus
events. I see a 100% correlation between this debug printk in
fixup_irqs() and the do_IRQ() warning.
This patchset resolves this by adding definitions for
VECTOR_UNDEFINED(-1) and VECTOR_RETRIGGERED(-2) and modifying
the code to use them.
Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=64831
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Reviewed-by: Rui Wang <rui.y.wang@intel.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Seiji Aguchi <seiji.aguchi@hds.com>
Cc: Yang Zhang <yang.z.zhang@Intel.com>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: janet.morgan@Intel.com
Cc: tony.luck@Intel.com
Cc: ruiv.wang@gmail.com
Link: http://lkml.kernel.org/r/1388938252-16627-1-git-send-email-prarit@redhat.com
[ Cleaned up the code a bit. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
These handlers are all referenced from assembler stubs, so need
to be visible.
The handlers without arguments become asmlinkage, the others __visible
to not force regparms(0) on x86-32.
I put it all into a single patch, please let me know if you want
it it split up.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Link: http://lkml.kernel.org/r/1375740170-7446-4-git-send-email-andi@firstfloor.org
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Compiling without CONFIG_X86_LOCAL_APIC set, apic.c will not be
compiled, and the irq tracepoints will not be created via the
CREATE_TRACE_POINTS macro. When CONFIG_X86_LOCAL_APIC is not set,
we get the following build error:
LD init/built-in.o
arch/x86/built-in.o: In function `trace_x86_platform_ipi_entry':
linux-test.git/arch/x86/include/asm/trace/irq_vectors.h:66: undefined reference to `__tracepoint_x86_platform_ipi_entry'
arch/x86/built-in.o: In function `trace_x86_platform_ipi_exit':
linux-test.git/arch/x86/include/asm/trace/irq_vectors.h:66: undefined reference to `__tracepoint_x86_platform_ipi_exit'
arch/x86/built-in.o: In function `trace_irq_work_entry':
linux-test.git/arch/x86/include/asm/trace/irq_vectors.h:72: undefined reference to `__tracepoint_irq_work_entry'
arch/x86/built-in.o: In function `trace_irq_work_exit':
linux-test.git/arch/x86/include/asm/trace/irq_vectors.h:72: undefined reference to `__tracepoint_irq_work_exit'
arch/x86/built-in.o:(__jump_table+0x8): undefined reference to `__tracepoint_x86_platform_ipi_entry'
arch/x86/built-in.o:(__jump_table+0x14): undefined reference to `__tracepoint_x86_platform_ipi_exit'
arch/x86/built-in.o:(__jump_table+0x20): undefined reference to `__tracepoint_irq_work_entry'
arch/x86/built-in.o:(__jump_table+0x2c): undefined reference to `__tracepoint_irq_work_exit'
make[1]: *** [vmlinux] Error 1
make: *** [sub-make] Error 2
As irq.c is always compiled for x86, it is a more appropriate location
to create the irq tracepoints.
Cc: Seiji Aguchi <seiji.aguchi@hds.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
[Purpose of this patch]
As Vaibhav explained in the thread below, tracepoints for irq vectors
are useful.
http://www.spinics.net/lists/mm-commits/msg85707.html
<snip>
The current interrupt traces from irq_handler_entry and irq_handler_exit
provide when an interrupt is handled. They provide good data about when
the system has switched to kernel space and how it affects the currently
running processes.
There are some IRQ vectors which trigger the system into kernel space,
which are not handled in generic IRQ handlers. Tracing such events gives
us the information about IRQ interaction with other system events.
The trace also tells where the system is spending its time. We want to
know which cores are handling interrupts and how they are affecting other
processes in the system. Also, the trace provides information about when
the cores are idle and which interrupts are changing that state.
<snip>
On the other hand, my usecase is tracing just local timer event and
getting a value of instruction pointer.
I suggested to add an argument local timer event to get instruction pointer before.
But there is another way to get it with external module like systemtap.
So, I don't need to add any argument to irq vector tracepoints now.
[Patch Description]
Vaibhav's patch shared a trace point ,irq_vector_entry/irq_vector_exit, in all events.
But there is an above use case to trace specific irq_vector rather than tracing all events.
In this case, we are concerned about overhead due to unwanted events.
So, add following tracepoints instead of introducing irq_vector_entry/exit.
so that we can enable them independently.
- local_timer_vector
- reschedule_vector
- call_function_vector
- call_function_single_vector
- irq_work_entry_vector
- error_apic_vector
- thermal_apic_vector
- threshold_apic_vector
- spurious_apic_vector
- x86_platform_ipi_vector
Also, introduce a logic switching IDT at enabling/disabling time so that a time penalty
makes a zero when tracepoints are disabled. Detailed explanations are as follows.
- Create trace irq handlers with entering_irq()/exiting_irq().
- Create a new IDT, trace_idt_table, at boot time by adding a logic to
_set_gate(). It is just a copy of original idt table.
- Register the new handlers for tracpoints to the new IDT by introducing
macros to alloc_intr_gate() called at registering time of irq_vector handlers.
- Add checking, whether irq vector tracing is on/off, into load_current_idt().
This has to be done below debug checking for these reasons.
- Switching to debug IDT may be kicked while tracing is enabled.
- On the other hands, switching to trace IDT is kicked only when debugging
is disabled.
In addition, the new IDT is created only when CONFIG_TRACING is enabled to avoid being
used for other purposes.
Signed-off-by: Seiji Aguchi <seiji.aguchi@hds.com>
Link: http://lkml.kernel.org/r/51C323ED.5050708@hds.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
When implementing tracepoints in interrupt handers, if the tracepoints are
simply added in the performance sensitive path of interrupt handers,
it may cause potential performance problem due to the time penalty.
To solve the problem, an idea is to prepare non-trace/trace irq handers and
switch their IDTs at the enabling/disabling time.
So, let's introduce entering_irq()/exiting_irq() for pre/post-
processing of each irq handler.
A way to use them is as follows.
Non-trace irq handler:
smp_irq_handler()
{
entering_irq(); /* pre-processing of this handler */
__smp_irq_handler(); /*
* common logic between non-trace and trace handlers
* in a vector.
*/
exiting_irq(); /* post-processing of this handler */
}
Trace irq_handler:
smp_trace_irq_handler()
{
entering_irq(); /* pre-processing of this handler */
trace_irq_entry(); /* tracepoint for irq entry */
__smp_irq_handler(); /*
* common logic between non-trace and trace handlers
* in a vector.
*/
trace_irq_exit(); /* tracepoint for irq exit */
exiting_irq(); /* post-processing of this handler */
}
If tracepoints can place outside entering_irq()/exiting_irq() as follows,
it looks cleaner.
smp_trace_irq_handler()
{
trace_irq_entry();
smp_irq_handler();
trace_irq_exit();
}
But it doesn't work.
The problem is with irq_enter/exit() being called. They must be called before
trace_irq_enter/exit(), because of the rcu_irq_enter() must be called before
any tracepoints are used, as tracepoints use rcu to synchronize.
As a possible alternative, we may be able to call irq_enter() first as follows
if irq_enter() can nest.
smp_trace_irq_hander()
{
irq_entry();
trace_irq_entry();
smp_irq_handler();
trace_irq_exit();
irq_exit();
}
But it doesn't work, either.
If irq_enter() is nested, it may have a time penalty because it has to check if it
was already called or not. The time penalty is not desired in performance sensitive
paths even if it is tiny.
Signed-off-by: Seiji Aguchi <seiji.aguchi@hds.com>
Link: http://lkml.kernel.org/r/51C3238D.9040706@hds.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Pull kvm updates from Gleb Natapov:
"Highlights of the updates are:
general:
- new emulated device API
- legacy device assignment is now optional
- irqfd interface is more generic and can be shared between arches
x86:
- VMCS shadow support and other nested VMX improvements
- APIC virtualization and Posted Interrupt hardware support
- Optimize mmio spte zapping
ppc:
- BookE: in-kernel MPIC emulation with irqfd support
- Book3S: in-kernel XICS emulation (incomplete)
- Book3S: HV: migration fixes
- BookE: more debug support preparation
- BookE: e6500 support
ARM:
- reworking of Hyp idmaps
s390:
- ioeventfd for virtio-ccw
And many other bug fixes, cleanups and improvements"
* tag 'kvm-3.10-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (204 commits)
kvm: Add compat_ioctl for device control API
KVM: x86: Account for failing enable_irq_window for NMI window request
KVM: PPC: Book3S: Add API for in-kernel XICS emulation
kvm/ppc/mpic: fix missing unlock in set_base_addr()
kvm/ppc: Hold srcu lock when calling kvm_io_bus_read/write
kvm/ppc/mpic: remove users
kvm/ppc/mpic: fix mmio region lists when multiple guests used
kvm/ppc/mpic: remove default routes from documentation
kvm: KVM_CAP_IOMMU only available with device assignment
ARM: KVM: iterate over all CPUs for CPU compatibility check
KVM: ARM: Fix spelling in error message
ARM: KVM: define KVM_ARM_MAX_VCPUS unconditionally
KVM: ARM: Fix API documentation for ONE_REG encoding
ARM: KVM: promote vfp_host pointer to generic host cpu context
ARM: KVM: add architecture specific hook for capabilities
ARM: KVM: perform HYP initilization for hotplugged CPUs
ARM: KVM: switch to a dual-step HYP init code
ARM: KVM: rework HYP page table freeing
ARM: KVM: enforce maximum size for identity mapped code
ARM: KVM: move to a KVM provided HYP idmap
...
With the current implementation, kstat_cpu(cpu).irqs_sum is also
increased in case of irq_mis_count increment.
So there is no need to count irq_mis_count in arch_irq_stat,
otherwise irq_mis_count will be counted twice in the sum of
/proc/stat.
Reported-by: Liu Chuansheng <chuansheng.liu@intel.com>
Signed-off-by: Li Fei <fei.li@intel.com>
Acked-by: Liu Chuansheng <chuansheng.liu@intel.com>
Cc: tomoki.sekiyama.qu@hitachi.com
Cc: joe@perches.com
Link: http://lkml.kernel.org/r/1366980611.32469.7.camel@fli24-HP-Compaq-8100-Elite-CMT-PC
Cc: <stable@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Posted Interrupt feature requires a special IPI to deliver posted interrupt
to guest. And it should has a high priority so the interrupt will not be
blocked by others.
Normally, the posted interrupt will be consumed by vcpu if target vcpu is
running and transparent to OS. But in some cases, the interrupt will arrive
when target vcpu is scheduled out. And host will see it. So we need to
register a dump handler to handle it.
Signed-off-by: Yang Zhang <yang.z.zhang@Intel.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Pull x86/mm changes from Ingo Molnar:
"The biggest change is new TLB partial flushing code for AMD CPUs.
(The v3.6 kernel had the Intel CPU side code, see commits
e0ba94f14f74..effee4b9b3b.)
There's also various other refinements around the TLB flush code"
* 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86: Distinguish TLB shootdown interrupts from other functions call interrupts
x86/mm: Fix range check in tlbflush debugfs interface
x86, cpu: Preset default tlb_flushall_shift on AMD
x86, cpu: Add AMD TLB size detection
x86, cpu: Push TLB detection CPUID check down
x86, cpu: Fixup tlb_flushall_shift formatting
As TLB shootdown requests to other CPU cores are now using function call
interrupts, TLB shootdowns entry in /proc/interrupts is always shown as 0.
This behavior change was introduced by commit 52aec3308d ("x86/tlb:
replace INVALIDATE_TLB_VECTOR by CALL_FUNCTION_VECTOR").
This patch reverts TLB shootdowns entry in /proc/interrupts to count TLB
shootdowns separately from the other function call interrupts.
Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama.qu@hitachi.com>
Link: http://lkml.kernel.org/r/20120926021128.22212.20440.stgit@hpxw
Acked-by: Alex Shi <alex.shi@intel.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
When one CPU is going down and this CPU is the last one in irq
affinity, current code is setting cpu_all_mask as the new
affinity for that irq.
But for some systems (such as in Medfield Android mobile) the
firmware sends the interrupt to each CPU in the irq affinity
mask, averaged, and cpu_all_mask includes all potential CPUs,
i.e. offline ones as well.
So replace cpu_all_mask with cpu_online_mask.
Signed-off-by: liu chuansheng <chuansheng.liu@intel.com>
Acked-by: Yanmin Zhang <yanmin_zhang@linux.intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/27240C0AC20F114CBF8149A2696CBE4A137286@SHSMSX101.ccr.corp.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
In the current kernel, percpu variable `vector_irq' is not always
cleared when a CPU is offlined. If the CPU that has the disabled
irqs in vector_irq is hotplugged again, __setup_vector_irq()
hits invalid irq vector and may crash.
This bug can be reproduced as following;
# echo 0 > /sys/devices/system/cpu/cpu7/online
# modprobe -r some_driver_using_interrupts # vector_irq@cpu7 uncleared
# echo 1 > /sys/devices/system/cpu/cpu7/online # kernel may crash
To fix this problem, this patch clears vector_irq in
__fixup_irqs() when the CPU is offlined.
This also reverts commit f6175f5bfb, which partially fixes
this bug by clearing vector in __clear_irq_vector(). But in
environments with IOMMU IRQ remapper, it could fail because
cfg->domain doesn't contain offlined CPUs. With this patch, the
fix in __clear_irq_vector() can be reverted because every
vector_irq is already cleared in __fixup_irqs() on offlined CPUs.
Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama.qu@hitachi.com>
Acked-by: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: yrl.pp-manager.tt@hitachi.com
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Alexander Gordeev <agordeev@redhat.com>
Link: http://lkml.kernel.org/r/20120726104732.2889.19144.stgit@kvmdev
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Use a more current logging style:
- Bare printks should have a KERN_<LEVEL> for consistency's sake
- Add pr_fmt where appropriate
- Neaten some macro definitions
- Convert some Ok output to OK
- Use "%s: ", __func__ in pr_fmt for summit
- Convert some printks to pr_<level>
Message output is not identical in all cases.
Signed-off-by: Joe Perches <joe@perches.com>
Cc: levinsasha928@gmail.com
Link: http://lkml.kernel.org/r/1337655007.24226.10.camel@joe2Laptop
[ merged two similar patches, tidied up the changelog ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The default irq_disable() sematics are to mark the interrupt disabled,
but keep it unmasked. If the interrupt is delivered while marked
disabled, the low level interrupt handler masks it and marks it
pending. This is important for detecting wakeup interrupts during
suspend and for edge type interrupts to avoid losing interrupts.
fixup_irqs() moves the interrupts away from an offlined cpu. For
certain interrupt types it needs to mask the interrupt line before
changing the affinity. After affinity has changed the interrupt line
is unmasked again, but only if it is not marked disabled.
This breaks the lazy irq disable semantics and causes problems in
suspend as the interrupt can be lost or wakeup functionality is
broken.
Check irqd_irq_masked() instead of irqd_irq_disabled() because
irqd_irq_masked() is only set, when the core code actually masked the
interrupt line. If it's not set, we unmask the interrupt and let the
lazy irq disable logic deal with an eventually incoming interrupt.
[ tglx: Massaged changelog and added a comment ]
Signed-off-by: liu chuansheng <chuansheng.liu@intel.com>
Cc: Yanmin Zhang <yanmin_zhang@linux.intel.com>
Link: http://lkml.kernel.org/r/27240C0AC20F114CBF8149A2696CBE4A05DFB3@SHSMSX101.ccr.corp.intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86: Skip cpus with apic-ids >= 255 in !x2apic_mode
x86, x2apic: Allow "nox2apic" to disable x2apic mode setup by BIOS
x86, x2apic: Fallback to xapic when BIOS doesn't setup interrupt-remapping
x86, acpi: Skip acpi x2apic entries if the x2apic feature is not present
x86, apic: Add probe() for apic_flat
x86: Simplify code by removing a !SMP #ifdefs from 'struct cpuinfo_x86'
x86: Convert per-cpu counter icr_read_retry_count into a member of irq_stat
x86: Add per-cpu stat counter for APIC ICR read tries
pci, x86/io-apic: Allow PCI_IOAPIC to be user configurable on x86
x86: Fix the !CONFIG_NUMA build of the new CPU ID fixup code support
x86: Add NumaChip support
x86: Add x86_init platform override to fix up NUMA core numbering
x86: Make flat_init_apic_ldr() available
LAPIC related statistics are grouped inside the per-cpu
structure irq_stat, so there is no need for icr_read_retry_count
to be a standalone per-cpu variable.
This patch moves icr_read_retry_count to where it belongs.
Suggested-y: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Fernando Luis Vazquez Cao <fernando@oss.ntt.co.jp>
Cc: Jörn Engel <joern@logfs.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
