Commit Graph

232 Commits

Author SHA1 Message Date
Sven Eckelmann
d7129dafcb batman-adv: netlink: add gateway table queries
Add BATADV_CMD_GET_GATEWAYS commands, using handlers bat_gw_dump in
batadv_algo_ops. Will always return -EOPNOTSUPP for now, as no
implementations exist yet.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-08-09 07:54:40 +02:00
Matthias Schiffer
85cf8c859d batman-adv: netlink: add originator and neighbor table queries
Add BATADV_CMD_GET_ORIGINATORS and BATADV_CMD_GET_NEIGHBORS commands,
using handlers bat_orig_dump and bat_neigh_dump in batadv_algo_ops. Will
always return -EOPNOTSUPP for now, as no implementations exist yet.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
[sven@narfation.org: Rewrite based on new algo_ops structures]
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2016-08-09 07:54:38 +02:00
Linus Lüssing
a65e548131 batman-adv: Introduce forward packet creation helper
This patch abstracts the forward packet creation into the new function
batadv_forw_packet_alloc().

The queue counting and interface reference counters are now handled
internally within batadv_forw_packet_alloc() and its
batadv_forw_packet_free() counterpart. This should reduce the risk of
having reference/queue counting bugs again and should increase
code readibility.

Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-08-09 07:54:32 +02:00
Antonio Quartulli
34d99cfefa batman-adv: make GW election code protocol specific
Each routing protocol may have its own specific logic about
gateway election which is potentially based on the metric being
used.

Create two GW specific API functions and move the current election
logic in the B.A.T.M.A.N. IV specific code.

Signed-off-by: Antonio Quartulli <a@unstable.cc>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-08-09 07:54:29 +02:00
Antonio Quartulli
086869438a batman-adv: make the GW selection class algorithm specific
The B.A.T.M.A.N. V algorithm uses a different metric compared to its
predecessor and for this reason the logic used to compute the best
Gateway is also changed. This means that the GW selection class
fed to this logic has a semantics that depends on the algorithm being
used.

Make the parsing and printing routine of the GW selection class
routing algorithm specific. Each algorithm can now parse (and print)
this value independently.

If no API is provided by any algorithm, the default is to use the
current mechanism of considering such value like an integer between
1 and 255.

Signed-off-by: Antonio Quartulli <a@unstable.cc>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-08-09 07:54:29 +02:00
Sven Eckelmann
569c98504b batman-adv: Revert "postpone sysfs removal when unregistering"
Postponing the removal of the interface breaks the expected behavior of
NETDEV_UNREGISTER and NETDEV_PRE_TYPE_CHANGE. This is especially
problematic when an interface is removed and added in quick succession.

This reverts commit 5bc44dc845 ("batman-adv: postpone sysfs removal when
unregistering").

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-08-09 07:54:27 +02:00
Sven Eckelmann
77d69d8ce1 batman-adv: Modify mesh_iface outside sysfs context
The legacy sysfs interface to modify interfaces belonging to batman-adv
is run inside a region holding s_lock. And to add a net_device, it has
to also get the rtnl_lock. This is exactly the other way around than in
other virtual net_devices and conflicts with netdevice notifier which
executes inside rtnl_lock.

The inverted lock situation is currently solved by executing the removal
of netdevices via workqueue. The workqueue isn't executed inside
rtnl_lock and thus can independently get the s_lock and the rtnl_lock.

But this workaround fails when the netdevice notifier creates events in
quick succession and the earlier triggered removal of a net_device isn't
processed in the workqueue before the adding of the new netdevice (with
same name) event is issued.

Instead the legacy sysfs interface store events have to be enqueued in
a workqueue to loose the s_lock. The worker is then free to get the
required locks and the deadlock is avoided.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-08-09 07:54:27 +02:00
Sven Eckelmann
e61cdfa334 batman-adv: Document optional batadv_algo_ops
Some operations in batadv_algo_ops are optional and marked as such in the
kerneldoc. But some of them miss the "(optional)" in their kerneldoc. These
have to also be marked to give an implementor of an algorithm the correct
background information without looking in the code calling these function
pointers.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-08-09 07:54:25 +02:00
David S. Miller
de0ba9a0d8 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Just several instances of overlapping changes.

Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-24 00:53:32 -04:00
Sven Eckelmann
15c2ed753c batman-adv: Fix reference leak in batadv_find_router
The replacement of last_bonding_candidate in batadv_orig_node has to be an
atomic operation. Otherwise it is possible that the reference counter of a
batadv_orig_ifinfo is reduced which was no longer the
last_bonding_candidate when the new candidate is added. This can either
lead to an invalid memory access or to reference leaks which make it
impossible to an interface which was added to batman-adv.

Fixes: f3b3d90189 ("batman-adv: add bonding again")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-07-05 12:43:52 +02:00
Sven Eckelmann
3db0decf11 batman-adv: Fix non-atomic bla_claim::backbone_gw access
The pointer batadv_bla_claim::backbone_gw can be changed at any time.
Therefore, access to it must be protected to ensure that two function
accessing the same backbone_gw are actually accessing the same. This is
especially important when the crc_lock is used or when the backbone_gw of a
claim is exchanged.

Not doing so leads to invalid memory access and/or reference leaks.

Fixes: 23721387c4 ("batman-adv: add basic bridge loop avoidance code")
Fixes: 5a1dd8a477 ("batman-adv: lock crc access in bridge loop avoidance")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-07-05 12:43:21 +02:00
David S. Miller
b77af26a79 This feature patchset includes the following changes:
- Cleanup work by Markus Pargmann and Sven Eckelmann (six patches)
 
  - Initial Netlink support by Matthias Schiffer (two patches)
 
  - Throughput Meter implementation by Antonio Quartulli, a kernel-space
    traffic generator to estimate link speeds. This feature is useful on
    low-end WiFi APs where running iperf or netperf from userspace
    gives wrong results due to heavy userspace/kernelspace overhead.
    (two patches)
 
  - API clean-up work by Antonio Quartulli (one patch)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABCgAGBQJXel3cAAoJEKEr45hCkp6hxs0P/jQZBJ37Bd4EHRGdhvCJWwsO
 j79zr7mIECub8a6PMkO1GI87ksJNtRdRw7XAIbLKTwsKEsUE0Gpv/MLLKgv/nD7X
 zatcoI4DujkgSojZIcOV/061+M9FAnCtAYv13jIS8nbXdqfGPxPfLua6Zbvx1GS2
 z/Rqg/WbB2qDtDlUrp0W/8oXQ+k6062G7GigroPLmjdWd5lF0H6ly4loWsxFyr0U
 GVl44HM4nOj7DwkVlrGoOXnAbjpz9TNC/aA5TIS/tLFZkm5dvJjjKLDbxo5NM9aq
 hRhFy8Gbe0TmOxV3mKZUT1oHuaHgFDY2tADLiLF2g/ijgaTetXCBJ6DXQ7BkiZnh
 +t1fnutOB1D05+cZGDmlfb2bFXO6vdDwNzKYuPdeW0tUOVwzNIaMK+US1HffUD3F
 ciK/cALsLbfJ3QkUHJclE57baMuB2c7YWJUxGdp2r4lKHak6tc8+BsornI6lB6qY
 kcxip6EEaT7edjT66Qjq8GtFK7WIri5nHI9n5Js+Wwl1QENvkLmZRQ6qZexwSplS
 RTZmmO+i+Y4rGDa3xoVSlC+CEUO7D4VwhET2Jir7KJrVS+pFNRAmfpUNWxeauAls
 D1xWgBrWjjOYu5i3LjwC6cHl4eTWxBwWmBUaxLUUeyoR22ulIs6bXCQMWOLMbupd
 q8k2B5BW9waTAgb4Tam9
 =PFHu
 -----END PGP SIGNATURE-----

Merge tag 'batadv-next-for-davem-20160704' of git://git.open-mesh.org/linux-merge

Simon Wunderlich says:

====================
This feature patchset includes the following changes:

 - Cleanup work by Markus Pargmann and Sven Eckelmann (six patches)

 - Initial Netlink support by Matthias Schiffer (two patches)

 - Throughput Meter implementation by Antonio Quartulli, a kernel-space
   traffic generator to estimate link speeds. This feature is useful on
   low-end WiFi APs where running iperf or netperf from userspace
   gives wrong results due to heavy userspace/kernelspace overhead.
   (two patches)

 - API clean-up work by Antonio Quartulli (one patch)
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-04 23:33:59 -07:00
Antonio Quartulli
29824a55c0 batman-adv: split routing API data structure in subobjects
The routing API data structure contains several function
pointers that can easily be grouped together based on the
component they work with.

Split the API in subobjects in order to improve definition readability.

At the same time, remove the "bat_" prefix from the API object and
its fields names. These are batman-adv private structs and there is no
need to always prepend such prefix, which only makes function invocations
much much longer.

Signed-off-by: Antonio Quartulli <a@unstable.cc>
Reviewed-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-07-04 12:37:19 +02:00
Antonio Quartulli
33a3bb4a33 batman-adv: throughput meter implementation
The throughput meter module is a simple, kernel-space replacement for
throughtput measurements tool like iperf and netperf. It is intended to
approximate TCP behaviour.

It is invoked through batctl: the protocol is connection oriented, with
cumulative acknowledgment and a dynamic-size sliding window.

The test *can* be interrupted by batctl. A receiver side timeout avoids
unlimited waitings for sender packets: after one second of inactivity, the
receiver abort the ongoing test.

Based on a prototype from Edo Monticelli <montik@autistici.org>

Signed-off-by: Antonio Quartulli <antonio.quartulli@open-mesh.com>
Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-07-04 12:37:18 +02:00
David S. Miller
3ea00443f1 This feature patchset includes the following changes:
- two patches with minimal clean up work by Antonio Quartulli and
    Simon Wunderlich
 
  - eight patches of B.A.T.M.A.N. V, API and documentation clean
    up work, by Antonio Quartulli and Marek Lindner
 
  - Andrew Lunn fixed the skb priority adoption when forwarding
    fragmented packets (two patches)
 
  - Multicast optimization support is now enabled for bridges which
    comes with some protocol updates, by Linus Luessing
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABCgAGBQJXdmhpAAoJEKEr45hCkp6h/R0P/1K0mZjs1lk15j1oc0EeE/lJ
 a47nwLQiAj9O790SUhQuonUYtbw5jhxZq5P1zYvg44ngRdUhsH9yiwr+Yado40CW
 5ek+EdfGfkwNThGG++knVrbhLPrGxSC9Q2qJCApergt4wViWvvovSJOZsKVcanei
 Qv9uGn6TIhZW3FFhvYk6/xgseZhjRISgxPkO1N20tMcC3f0w4YgM5QcCPGG2KB3N
 CYq1qryyl4Jf6NeNap/lXiTo6JA5qOHYe68ziotJTtlsrsYQ3WitJvuKO+bWuQIv
 zOU/jQ7qUwuabLT5TnzZKxQJvhrqfA5V20OM3yD4lnhdgvqVsHgHoIRy6RpN4U8M
 rFlgROZvm+k0ATnL8AcUtIY7EA/EA0ifHN2fdTAfQ0XNc0VxTXEWB4qTTBJu3+se
 N0+QyIjpXzgHqKxjIpr8Sm3tBO/ANCui/gWl5SToGXis3xDsRivvTMWNSNYjgDcP
 WdyLtx9h7RLNOh64Idwsq4yDHt+/P86z7xJQdlkmrshkjqL/HNgS93U5CeAC3mN0
 S6N5PgZG07EYnGxzxDid+6x1UP1VA7dyqHJpxpYY7qbw+/aDVlq5XH/vI/9Lbq5i
 vu/54L8cVG5nBe54SZBeUib5W7Wkgf3POWzt+rrRwbHY+gAE1zUPQNNzgDtLHH0N
 K/XJwdcoGQzA5LEynGE7
 =js/J
 -----END PGP SIGNATURE-----

Merge tag 'batadv-next-for-davem-20160701' of git://git.open-mesh.org/linux-merge

Simon Wunderlich says:

====================
This feature patchset includes the following changes:

 - two patches with minimal clean up work by Antonio Quartulli and
   Simon Wunderlich

 - eight patches of B.A.T.M.A.N. V, API and documentation clean
   up work, by Antonio Quartulli and Marek Lindner

 - Andrew Lunn fixed the skb priority adoption when forwarding
   fragmented packets (two patches)

 - Multicast optimization support is now enabled for bridges which
   comes with some protocol updates, by Linus Luessing
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-01 17:05:00 -04:00
Linus Lüssing
72f7b2deaf batman-adv: Adding logging of mcast flag changes
With this patch changes relevant to a node's own multicast flags are
printed to the 'mcast' log level.

Tested-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-06-30 10:29:43 +02:00
Linus Lüssing
687937ab34 batman-adv: Add multicast optimization support for bridged setups
With this patch we are finally able to support multicast optimizations
in bridged setups, too. So far, if a bridge was added on top of a
soft-interface (e.g. bat0) the batman-adv multicast optimizations
needed to be disabled to avoid packetloss.

Current Linux bridge implementations and API can now provide us
with the so far missing information about interested but "remote"
multicast receivers behind bridge ports.

The Linux bridge performs the detection of remote participants
interested in multicast packets with its own and mature so
called IGMP and MLD snooping code and stores that in its
database. With the new API provided by the bridge batman-adv can
now simply hook into this database.

We then reliably announce the gathered multicast listeners to
other nodes through the batman-adv translation table.

Additionally, the Linux bridge provides us with the information about
whether an IGMP/MLD querier exists. If there is none then we need to
disable multicast optimizations as we cannot learn about multicast
listeners on external, bridged-in host then.

Tested-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-06-30 10:29:43 +02:00
Antonio Quartulli
3a24a63e74 batman-adv: move GW mode and selection class to private data structure
To reduce the field pollution in our main batadv_priv data structure
we've already created some substructures so that we could group fields
in a convenient manner.

However gw_mode and gw_sel_class are still part of the main object.

More both fields to the GW private substructure.

Signed-off-by: Antonio Quartulli <a@unstable.cc>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-06-30 10:29:43 +02:00
Antonio Quartulli
f0d97253fb batman-adv: remove ogm_emit and ogm_schedule API calls
The ogm_emit and ogm_schedule API calls were rather tight to the
B.A.T.M.A.N. IV logic and therefore rather difficult to use
with other algorithm implementations.

Remove such calls and move the surrounding logic into the
B.A.T.M.A.N. IV specific code.

Signed-off-by: Antonio Quartulli <a@unstable.cc>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-06-30 10:29:43 +02:00
Marek Lindner
d9f179877e batman-adv: remove unused callback from batadv_algo_ops struct
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-06-30 10:29:43 +02:00
Sven Eckelmann
9c4604a298 batman-adv: Fix use-after-free/double-free of tt_req_node
The tt_req_node is added and removed from a list inside a spinlock. But the
locking is sometimes removed even when the object is still referenced and
will be used later via this reference. For example batadv_send_tt_request
can create a new tt_req_node (including add to a list) and later
re-acquires the lock to remove it from the list and to free it. But at this
time another context could have already removed this tt_req_node from the
list and freed it.

CPU#0

    batadv_batman_skb_recv from net_device 0
    -> batadv_iv_ogm_receive
      -> batadv_iv_ogm_process
        -> batadv_iv_ogm_process_per_outif
          -> batadv_tvlv_ogm_receive
            -> batadv_tvlv_ogm_receive
              -> batadv_tvlv_containers_process
                -> batadv_tvlv_call_handler
                  -> batadv_tt_tvlv_ogm_handler_v1
                    -> batadv_tt_update_orig
                      -> batadv_send_tt_request
                        -> batadv_tt_req_node_new
                           spin_lock(...)
                           allocates new tt_req_node and adds it to list
                           spin_unlock(...)
                           return tt_req_node

CPU#1

    batadv_batman_skb_recv from net_device 1
    -> batadv_recv_unicast_tvlv
      -> batadv_tvlv_containers_process
        -> batadv_tvlv_call_handler
          -> batadv_tt_tvlv_unicast_handler_v1
            -> batadv_handle_tt_response
               spin_lock(...)
               tt_req_node gets removed from list and is freed
               spin_unlock(...)

CPU#0

                      <- returned to batadv_send_tt_request
                         spin_lock(...)
                         tt_req_node gets removed from list and is freed
                         MEMORY CORRUPTION/SEGFAULT/...
                         spin_unlock(...)

This can only be solved via reference counting to allow multiple contexts
to handle the list manipulation while making sure that only the last
context holding a reference will free the object.

Fixes: a73105b8d4 ("batman-adv: improved client announcement mechanism")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Tested-by: Martin Weinelt <martin@darmstadt.freifunk.net>
Tested-by: Amadeus Alfa <amadeus@chemnitz.freifunk.net>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-29 04:01:47 -04:00
Simon Wunderlich
cd9c7bfbba batman-adv: add detection for complex bridge loops
There are network setups where the current bridge loop avoidance can't
detect bridge loops. The minimal setup affected would consist of two
LANs and two separate meshes, connected in a ring like that:

   A...(mesh1)...B
   |             |
 (LAN1)        (LAN2)
   |             |
   C...(mesh2)...D

Since both the meshes and backbones are separate, the bridge loop
avoidance has not enough information to detect and avoid the loop
in this case. Even if these scenarios can't be fixed easily,
these kind of loops can be detected.

This patch implements a periodic check (running every 60 seconds for
now) which sends a broadcast frame with a random MAC address on
each backbone VLAN. If a broadcast frame with the same MAC address
is received shortly after on the mesh, we know that there must be a
loop and report that incident as well as throw an uevent to let others
handle that problem.

Signed-off-by: Simon Wunderlich <simon.wunderlich@open-mesh.com>
[sven@narfation.org: fix conflicts with current version]
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-05-10 18:26:45 +08:00
Sven Eckelmann
abe59c6522 batman-adv: Fix reference counting of hardif_neigh_node object for neigh_node
The batadv_neigh_node was specific to a batadv_hardif_neigh_node and held
an implicit reference to it. But this reference was never stored in form of
a pointer in the batadv_neigh_node itself. Instead
batadv_neigh_node_release depends on a consistent state of
hard_iface->neigh_list and that batadv_hardif_neigh_get always returns the
batadv_hardif_neigh_node object which it has a reference for. But
batadv_hardif_neigh_get cannot guarantee that because it is working only
with rcu_read_lock on this list. It can therefore happen that a neigh_addr
is in this list twice or that batadv_hardif_neigh_get cannot find the
batadv_hardif_neigh_node for an neigh_addr due to some other list
operations taking place at the same time.

Instead add a batadv_hardif_neigh_node pointer directly in
batadv_neigh_node which will be used for the reference counter decremented
on release of batadv_neigh_node.

Fixes: cef63419f7 ("batman-adv: add list of unique single hop neighbors per hard-interface")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-04-29 19:46:11 +08:00
Sven Eckelmann
a33d970d0b batman-adv: Fix reference counting of vlan object for tt_local_entry
The batadv_tt_local_entry was specific to a batadv_softif_vlan and held an
implicit reference to it. But this reference was never stored in form of a
pointer in the tt_local_entry itself. Instead batadv_tt_local_remove,
batadv_tt_local_table_free and batadv_tt_local_purge_pending_clients depend
on a consistent state of bat_priv->softif_vlan_list and that
batadv_softif_vlan_get always returns the batadv_softif_vlan object which
it has a reference for. But batadv_softif_vlan_get cannot guarantee that
because it is working only with rcu_read_lock on this list. It can
therefore happen that an vid is in this list twice or that
batadv_softif_vlan_get cannot find the batadv_softif_vlan for an vid due to
some other list operations taking place at the same time.

Instead add a batadv_softif_vlan pointer directly in batadv_tt_local_entry
which will be used for the reference counter decremented on release of
batadv_tt_local_entry.

Fixes: 35df3b298f ("batman-adv: fix TT VLAN inconsistency on VLAN re-add")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Acked-by: Antonio Quartulli <a@unstable.cc>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-04-29 19:46:11 +08:00
Antonio Quartulli
b6cf5d499f batman-adv: B.A.T.M.A.N V - make sure iface is reactivated upon NETDEV_UP event
At the moment there is no explicit reactivation of an hard-interface
upon NETDEV_UP event. In case of B.A.T.M.A.N. IV the interface is
reactivated as soon as the next OGM is scheduled for sending, but this
mechanism does not work with B.A.T.M.A.N. V. The latter does not rely
on the same scheduling mechanism as its predecessor and for this reason
the hard-interface remains deactivated forever after being brought down
once.

This patch fixes the reactivation mechanism by adding a new routing API
which explicitly allows each algorithm to perform any needed operation
upon interface re-activation.

Such API is optional and is implemented by B.A.T.M.A.N. V only and it
just takes care of setting the iface status to ACTIVE

Signed-off-by: Antonio Quartulli <a@unstable.cc>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2016-04-29 19:46:11 +08:00
Antonio Quartulli
c833484e5f batman-adv: ELP - compute the metric based on the estimated throughput
In case of wireless interface retrieve the throughput by
querying cfg80211. To perform this call a separate work
must be scheduled because the function may sleep and this
is not allowed within an RCU protected context (RCU in this
case is used to iterate over all the neighbours).

Use ethtool to retrieve information about an Ethernet link
like HALF/FULL_DUPLEX and advertised bandwidth (e.g.
100/10Mbps).

The metric is updated each time a new ELP packet is sent,
this way it is possible to timely react to a metric
variation which can imply (for example) a neighbour
disconnection.

Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2016-02-29 16:25:06 +08:00
Antonio Quartulli
95d392784d batman-adv: keep track of when unicast packets are sent
To enable ELP to send probing packets over wireless links
only if needed, batman-adv must keep track of the last time
it sent a unicast packet towards every neighbour.

For this purpose a 2 main changes are introduced:
1) a new member of the elp_neigh_node structure stores the
   last time a unicast packet was sent towards this neighbour;
2) a wrapper function for sending unicast packets is
   implemented. This function will simply update the member
   describe din point 1) and then forward the packet to the
   real sending routine.

Point 2) implies that any code-path leading to a unicast
sending now has to use the new wrapper.

Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2016-02-29 16:05:32 +08:00
Antonio Quartulli
0b5ecc6811 batman-adv: add throughput override attribute to hard_ifaces
This attribute is exported to user space to disable the link
throughput auto-detection by setting a fixed value.
The throughput override value is used when batman-adv is
computing the link throughput towards a neighbour.

If the value is set to 0 then batman-adv will try to detect
the throughput by itself.

Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2016-02-29 16:05:32 +08:00
Antonio Quartulli
9323158ef9 batman-adv: OGMv2 - implement originators logic
Add the support for recognising new originators in the
network and rebroadcast their OGMs.

Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2016-02-29 16:05:31 +08:00
Antonio Quartulli
0da0035942 batman-adv: OGMv2 - add basic infrastructure
This is the initial implementation of the new OGM protocol
(version 2). It has been designed to work on top of the
newly added ELP.

In the previous version the OGM protocol was used to both
measure link qualities and flood the network with the metric
information. In this version the protocol is in charge of
the latter task only, leaving the former to ELP.

This means being able to decouple the interval used by the
neighbor discovery from the OGM broadcasting, which revealed
to be costly in dense networks and needed to be relaxed so
leading to a less responsive routing protocol.

Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2016-02-29 16:05:31 +08:00
Linus Luessing
162bd64c24 batman-adv: ELP - creating neighbor structures
Initially developed by Linus during a 6 months trainee study
period in Ascom (Switzerland) AG.

Signed-off-by: Linus Luessing <linus.luessing@web.de>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
2016-02-29 16:05:30 +08:00
Linus Luessing
d6f94d91f7 batman-adv: ELP - adding basic infrastructure
The B.A.T.M.A.N. protocol originally only used a single
message type (called OGM) to determine the link qualities to
the direct neighbors and spreading these link quality
information through the whole mesh. This procedure is
summarized on the BATMAN concept page and explained in
details in the RFC draft published in 2008.

This approach was chosen for its simplicity during the
protocol design phase and the implementation. However, it
also bears some drawbacks:

 *  Wireless interfaces usually come with some packet loss,
    therefore a higher broadcast rate is desirable to allow
    a fast reaction on flaky connections.
    Other interfaces of the same host might be connected to
    Ethernet LANs / VPNs / etc which rarely exhibit packet
    loss would benefit from a lower broadcast rate to reduce
    overhead.
 *  It generally is more desirable to detect local link
    quality changes at a faster rate than propagating all
    these changes through the entire mesh (the far end of
    the mesh does not need to care about local link quality
    changes that much). Other optimizations strategies, like
    reducing overhead, might be possible if OGMs weren't
    used for all tasks in the mesh at the same time.

As a result detecting local link qualities shall be handled
by an independent message type, ELP, whereas the OGM message
type remains responsible for flooding the mesh with these
link quality information and determining the overall path
transmit qualities.

Developed by Linus during a 6 months trainee study period in
Ascom (Switzerland) AG.

Signed-off-by: Linus Luessing <linus.luessing@web.de>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
2016-02-29 16:05:29 +08:00
Sven Eckelmann
92dcdf09a1 batman-adv: Convert batadv_tt_common_entry to kref
batman-adv uses a self-written reference implementation which is just based
on atomic_t. This is less obvious when reading the code than kref and
therefore increases the change that the reference counting will be missed.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-10 23:24:06 +08:00
Sven Eckelmann
7c12439115 batman-adv: Convert batadv_orig_node to kref
batman-adv uses a self-written reference implementation which is just based
on atomic_t. This is less obvious when reading the code than kref and
therefore increases the change that the reference counting will be missed.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-10 23:24:06 +08:00
Sven Eckelmann
161a3be932 batman-adv: Convert batadv_orig_node_vlan to kref
batman-adv uses a self-written reference implementation which is just based
on atomic_t. This is less obvious when reading the code than kref and
therefore increases the change that the reference counting will be missed.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-10 23:24:05 +08:00
Sven Eckelmann
7a659d5694 batman-adv: Convert batadv_hard_iface to kref
batman-adv uses a self-written reference implementation which is just based
on atomic_t. This is less obvious when reading the code than kref and
therefore increases the change that the reference counting will be missed.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-10 23:24:05 +08:00
Sven Eckelmann
77ae32e898 batman-adv: Convert batadv_neigh_node to kref
batman-adv uses a self-written reference implementation which is just based
on atomic_t. This is less obvious when reading the code than kref and
therefore increases the change that the reference counting will be missed.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-10 23:24:04 +08:00
Sven Eckelmann
a6ba0d340d batman-adv: Convert batadv_orig_ifinfo to kref
batman-adv uses a self-written reference implementation which is just based
on atomic_t. This is less obvious when reading the code than kref and
therefore increases the change that the reference counting will be missed.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-10 23:24:04 +08:00
Sven Eckelmann
962c68328b batman-adv: Convert batadv_neigh_ifinfo to kref
batman-adv uses a self-written reference implementation which is just based
on atomic_t. This is less obvious when reading the code than kref and
therefore increases the change that the reference counting will be missed.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-10 23:24:03 +08:00
Sven Eckelmann
6e8ef69dd4 batman-adv: Convert batadv_tt_orig_list_entry to kref
batman-adv uses a self-written reference implementation which is just based
on atomic_t. This is less obvious when reading the code than kref and
therefore increases the change that the reference counting will be missed.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-10 23:24:03 +08:00
Sven Eckelmann
32836f56f8 batman-adv: Convert batadv_tvlv_handler to kref
batman-adv uses a self-written reference implementation which is just based
on atomic_t. This is less obvious when reading the code than kref and
therefore increases the change that the reference counting will be missed.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-10 23:24:03 +08:00
Sven Eckelmann
f7157dd135 batman-adv: Convert batadv_tvlv_container to kref
batman-adv uses a self-written reference implementation which is just based
on atomic_t. This is less obvious when reading the code than kref and
therefore increases the change that the reference counting will be missed.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-10 23:24:02 +08:00
Sven Eckelmann
68a6722cc4 batman-adv: Convert batadv_dat_entry to kref
batman-adv uses a self-written reference implementation which is just based
on atomic_t. This is less obvious when reading the code than kref and
therefore increases the change that the reference counting will be missed.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-10 23:24:02 +08:00
Sven Eckelmann
727e0cd59e batman-adv: Convert batadv_nc_path to kref
batman-adv uses a self-written reference implementation which is just based
on atomic_t. This is less obvious when reading the code than kref and
therefore increases the change that the reference counting will be missed.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-10 23:24:01 +08:00
Sven Eckelmann
daf99b4810 batman-adv: Convert batadv_nc_node to kref
batman-adv uses a self-written reference implementation which is just based
on atomic_t. This is less obvious when reading the code than kref and
therefore increases the change that the reference counting will be missed.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-10 23:24:01 +08:00
Sven Eckelmann
71b7e3d316 batman-adv: Convert batadv_bla_claim to kref
batman-adv uses a self-written reference implementation which is just based
on atomic_t. This is less obvious when reading the code than kref and
therefore increases the change that the reference counting will be missed.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-10 23:24:00 +08:00
Sven Eckelmann
06e56ded86 batman-adv: Convert batadv_bla_backbone_gw to kref
batman-adv uses a self-written reference implementation which is just based
on atomic_t. This is less obvious when reading the code than kref and
therefore increases the change that the reference counting will be missed.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-10 23:24:00 +08:00
Sven Eckelmann
6be4d30c18 batman-adv: Convert batadv_softif_vlan to kref
batman-adv uses a self-written reference implementation which is just based
on atomic_t. This is less obvious when reading the code than kref and
therefore increases the change that the reference counting will be missed.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-10 23:23:59 +08:00
Sven Eckelmann
e7aed321b8 batman-adv: Convert batadv_gw_node to kref
batman-adv uses a self-written reference implementation which is just based
on atomic_t. This is less obvious when reading the code than kref and
therefore increases the change that the reference counting will be missed.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-10 23:23:59 +08:00
Sven Eckelmann
90f564dff4 batman-adv: Convert batadv_hardif_neigh_node to kref
batman-adv uses a self-written reference implementation which is just based
on atomic_t. This is less obvious when reading the code than kref and
therefore increases the change that the reference counting will be missed.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-10 23:23:58 +08:00