DG1 has the south engine display on the same PCI device. Ideally we
could use HAS_PCH_SPLIT(), but that macro is misused all across the
code base to rather signify a range of gens. So add a fake one for DG1
to be used where needed.
Cc: Aditya Swarup <aditya.swarup@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200713182321.12390-6-lucas.demarchi@intel.com
Bspec asks us to remove the special programming of the
SHPD_FILTER_CNT register which we have been doing since CNP+.
Bspec: 49305
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200713182321.12390-5-lucas.demarchi@intel.com
DG1 has master unit interrupt register which is used to indicate the
correct source of interrupt.
v2: fix coding style on register definition
Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Cc: Daniele Spurio Ceraolo <daniele.ceraolospurio@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200713182321.12390-4-lucas.demarchi@intel.com
Bspec: 33617, 33617
v2: s/intel_dg1_info/dg1_info/ as done for other platforms before and
try to shut up compiler about ununsed variable that we know
shouldn't be used (Lucas)
v3: replace explicit attribute with __maybe_unused (Lucas)
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Stuart Summers <stuart.summers@intel.com>
Cc: Vanshidhar Konda <vanshidhar.r.konda@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Aravind Iddamsetty <aravind.iddamsetty@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Abdiel Janulgue <abdiel.janulgue@linux.intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200713182321.12390-2-lucas.demarchi@intel.com
According to the DP spec a DPTX must support vswing/pre-emphasis
up to and including level 2. Level 3 is optional (actually DP 1.4a
seems to make even level 3 mandatory for HBR2/3, while leaving it
optional for RBR/HBR1).
WARN if out encoders' .voltage_max()/.preemph_max() return
an illegal value.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200709145845.18118-1-ville.syrjala@linux.intel.com
So far, max dot clock rate for MST mode rely on physcial
bandwidth limitation. It would caused compatibility issue
if source display resolution exceed MST hub output ability.
For example, source DUT had DP 1.2 output capability.
And MST docking just support HDMI 1.4 spec. When a HDMI 2.0
monitor connected. Source would retrieve EDID from external
and get max resolution 4k@60fps. DP 1.2 can support 4K@60fps
because it did not surpass DP physical bandwidth limitation.
Do modeset to 4k@60fps, source output display data but MST
docking can't output HDMI properly due to this resolution
already over HDMI 1.4 spec.
Refer to commit <fcf463807596> ("drm/dp_mst: Use full_pbn
instead of available_pbn for bandwidth checks").
Source driver should refer to full_pbn to evaluate sink
output capability. And filter out the resolution surpass
sink output limitation.
Changes since v1:
* Using mgr->base.lock to protect full_pbn.
Changes since v2:
* Add ctx lock.
Changes since v3:
* s/intel_dp_mst_mode_clock_exceed_pbn_bandwidth/
intel_dp_mst_mode_clock_exceeds_pbn_bw/
* Use the new drm_connector_helper_funcs.mode_valid_ctx to properly pipe
down the drm_modeset_acquire_ctx that the probe helpers are using, so
we can safely grab &mgr->base.lock without deadlocking
Changes since v4:
* Move drm_dp_calc_pbn_mode(mode->clock, bpp, false) > port->full_pbn
check
* Fix the bpp we use in drm_dp_calc_pbn_mode()
* Drop leftover (!mgr) check
* Don't check for if full_pbn is unset. To be clear - it _can_ be unset,
but if it is then it's certainly a bug in DRM or a non-compliant sink
as full_pbn should always be populated by the time we call
->mode_valid_ctx.
We should workaround non-compliant sinks with full_pbn=0, but that
should happen in the DP MST helpers so we can estimate the full_pbn
value as best we can.
Tested-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Cooper Chiou <cooper.chiou@intel.com>
Co-developed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Lee Shawn C <shawn.c.lee@intel.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200713170746.254388-3-lyude@redhat.com
This is just an atomic version of mode_valid, which is intended to be
used for situations where a driver might need to check the atomic state
of objects other than the connector itself. One such example is with
MST, where the maximum possible bandwidth on a connector can change
dynamically irregardless of the display configuration.
Changes since v1:
* Use new drm logging functions
* Make some corrections in the mode_valid_ctx kdoc
* Return error codes or 0 from ->mode_valid_ctx() on fail, and store the
drm_mode_status in an additional function parameter
Changes since v2:
* Don't accidentally assign ret to mode->status on success, or we'll
squash legitimate mode validation results
* Don't forget to assign MODE_OK to status in drm_connector_mode_valid()
if we have no callbacks
* Drop leftover hunk in drm_modes.h around enum drm_mode_status
Changes since v3:
* s/return ret/return 0/ in drm_mode_validate_pipeline()
* Minor cleanup in drm_connector_mode_valid()
Tested-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Cc: Lee Shawn C <shawn.c.lee@intel.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200713170746.254388-2-lyude@redhat.com
Preempt-to-busy introduces various fascinating complications in that the
requests may complete as we are unsubmitting them from HW. As they may
then signal after unsubmission, we may find ourselves having to cleanup
the signaling request from within the signaling callback. This causes us
to recurse onto the same i915_request.lock.
However, if the request is already signaled (as it will be before we
enter the signal callbacks), we know we can skip the signaling of that
request during submission, neatly evading the spinlock recursion.
unsubmit(ve.rq0) # timeslice expiration or other preemption
-> virtual_submit_request(ve.rq0)
dma_fence_signal(ve.rq0) # request completed before preemption ack
-> submit_notify(ve.rq1)
-> virtual_submit_request(ve.rq1) # sees that we have completed ve.rq0
-> __i915_request_submit(ve.rq0)
[ 264.210142] BUG: spinlock recursion on CPU#2, sample_multi_tr/2093
[ 264.210150] lock: 0xffff9efd6ac55080, .magic: dead4ead, .owner: sample_multi_tr/2093, .owner_cpu: 2
[ 264.210155] CPU: 2 PID: 2093 Comm: sample_multi_tr Tainted: G U
[ 264.210158] Hardware name: Intel Corporation CoffeeLake Client Platform/CoffeeLake S UDIMM RVP, BIOS CNLSFWR1.R00.X212.B01.1909060036 09/06/2019
[ 264.210160] Call Trace:
[ 264.210167] dump_stack+0x98/0xda
[ 264.210174] spin_dump.cold+0x24/0x3c
[ 264.210178] do_raw_spin_lock+0x9a/0xd0
[ 264.210184] _raw_spin_lock_nested+0x6a/0x70
[ 264.210314] __i915_request_submit+0x10a/0x3c0 [i915]
[ 264.210415] virtual_submit_request+0x9b/0x380 [i915]
[ 264.210516] submit_notify+0xaf/0x14c [i915]
[ 264.210602] __i915_sw_fence_complete+0x8a/0x230 [i915]
[ 264.210692] i915_sw_fence_complete+0x2d/0x40 [i915]
[ 264.210762] __dma_i915_sw_fence_wake+0x19/0x30 [i915]
[ 264.210767] dma_fence_signal_locked+0xb1/0x1c0
[ 264.210772] dma_fence_signal+0x29/0x50
[ 264.210871] i915_request_wait+0x5cb/0x830 [i915]
[ 264.210876] ? dma_resv_get_fences_rcu+0x294/0x5d0
[ 264.210974] i915_gem_object_wait_fence+0x2f/0x40 [i915]
[ 264.211084] i915_gem_object_wait+0xce/0x400 [i915]
[ 264.211178] i915_gem_wait_ioctl+0xff/0x290 [i915]
Fixes: 22b7a426bb ("drm/i915/execlists: Preempt-to-busy")
References: 6d06779e86 ("drm/i915: Load balancing across a virtual engine")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: "Nayana, Venkata Ramana" <venkata.ramana.nayana@intel.com>
Cc: <stable@vger.kernel.org> # v5.4+
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200713141636.29326-1-chris@chris-wilson.co.uk
The danger in switching at random upon intel_context_pin is that the
context may still actually be inflight, as it will not be scheduled out
until a context switch after it is complete -- that may be a long time
after we do a final intel_context_unpin.
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2118
Fixes: 6d06779e86 ("drm/i915: Load balancing across a virtual engine")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: <stable@vger.kernel.org> # v5.3+
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200713160549.17344-1-chris@chris-wilson.co.uk
There is an error condition where err is not being set and an uninitialized
garbage value in err is being returned. Fix this by assigning err to an
appropriate error return value before taking the error exit path.
Addresses-Coverity: ("Uninitialized scalar value")
Fixes: ed2690a9ca ("drm/i915/selftest: Check that GPR are restored across noa_wait")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200713142551.423649-1-colin.king@canonical.com
We do not use the virtual engines for interrupts (they have physical
components), but we do use them to decouple the fence signaling during
submission. Currently, when we submit a completed request, we try to
enable the interrupt handler for the virtual engine, but we never disarm
it. A quick fix is then to mark the irq as enabled, and it will then
remain enabled -- and this prevents us from waking the device and never
letting it sleep again.
Fixes: f8db4d051b ("drm/i915: Initialise breadcrumb lists on the virtual engine")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: <stable@vger.kernel.org> # v5.5+
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200711203236.12330-1-chris@chris-wilson.co.uk
If something has gone awry with the CSB processing, we need to pause,
unwind and restart the request submission and event processing. However,
currently we skip the engine reset if we raise an error but discover no
active context, in the mistaken belief that it was merely a glitch in
the matrix. The glitches are real enough, and we do need to unwind even
if the engine appears idle (as it has gone permanently idle!) The
simplest way to unwind and recover is simply do the engine reset, which
should be very fast and _safe_ as nothing is active.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200711091349.28865-1-chris@chris-wilson.co.uk
We try not to assume that we captured any information, and so have to
check that error->gt exists before reporting. This check was missed in
err_print_capabilities, so lets break up the capability info and push it
into the GT dump.
We are still a long way from yamlifying this output!
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: 792592e72a ("drm/i915: Move the engine mask to intel_gt_info")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200710193239.5419-1-chris@chris-wilson.co.uk
If the HW throws a curve ball and reports either en event before it is
possible, or just a completely impossible event, we have to grin and
bear it. The first few events, we will likely not notice as we would be
expecting some event, but as soon as we stop expecting an event and yet
they still keep coming, then we enter into undefined state territory.
In which case, bail out, stop processing the events, and reset the
engine and our set of queued requests to recover.
The sporadic hangs and warnings will continue to plague CI, but at least
system stability should not be compromised.
v2: Commentary and force the reset-on-error.
v3: Customised user facing message for forced resets from internal errors.
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2045
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200710133125.30194-1-chris@chris-wilson.co.uk
Perf implements a GPU delay (noa_wait) by looping until the CS timestamp
has passed a certain point. This use MI_MATH and the general purpose
registers of the user's context, and since it is clobbering the user
state it must carefully save and restore the user's data around the
noa_wait. We can verify this by loading some values in the GPR that we
know will be clobbered by the noa_wait, and then inspecting the GPR after
the noa_wait completes and confirming that they have been restored.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200709224504.11345-2-chris@chris-wilson.co.uk
MI_STORE_REGISTER_MEM and MI_LOAD_REGISTER_MEM need to know which
translation to use when saving restoring the engine general purpose
registers to and from the GT scratch. Since GT scratch is mapped to
ggtt, we need to set an additional bit in the command to use GTT.
Fixes: daed3e4439 ("drm/i915/perf: implement active wait for noa configurations")
Suggested-by: Prathap Kumar Valsan <prathap.kumar.valsan@intel.com>
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200709224504.11345-1-chris@chris-wilson.co.uk
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Since the aliasing-ppgtt remains the default for gen6/gen7, it is worth
optimising the ppgtt allocation for it. In this case, we do not need to
flush the GGTT page directories entries as they are fixed during setup.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200709190111.5492-1-chris@chris-wilson.co.uk
HOBL means hours of battery life, it is a power-saving feature
were supported motherboards can use a special voltage swing table
that uses less power.
So here parsing the VBT to check if this feature is supported.
BSpec: 20150
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200708205512.21625-3-jose.souza@intel.com
Both cmp_u32 and cmp_u64 are comparing the pointers instead of the value
at those pointers. This will result in incorrect/unsorted list. Fix it
by deferencing the pointers before comparison.
Fixes: 4ba74e53ad ("drm/i915/selftests: Verify frequency scaling with RPS")
Fixes: 8757797ff9 ("drm/i915/selftests: Repeat the rps clock frequency measurement")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200709154931.23310-1-sudeep.holla@arm.com
As today those 2 WAs have different implementation between TGL and DG1
WA pages but checking the HSD it is clear that DG1 implementation
should be used for both, also to do so is easier as we just need to
extend WA 1407928979 to B* stepping.
Both WAs are need to fix some possible render corruptions.
DG1 initial patches were not merged yet, as soon it is this WAs should
be applied to DG1 as well.
BSpec: 53508
BSpec: 52890
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200708212947.40178-1-jose.souza@intel.com
Some platforms apply the FBC w/as in .init_clock_gating(), some
in fbc_activate(). Move them all to .init_clock_gating() for
consistentce. Also safer since we don't have to worry about the
RMWs clashing with any other runtime use of the same registers.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200708131223.9519-1-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
.get_modes() is supposed to return the number of modes added to the
probed_modes list (not that anyone actually checks for anything
except zero vs. not zero). Let's do that. Also switch over to using
intel_connector_update_modes() instead of hand rolling it.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200108181242.13650-8-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
With SDVO the pipe config pixel_multiplier only concerns itself with the
data on the SDVO bus. Any HDMI specific pixel repeat must be handled by
the SDVO device itself. To do that simply configure the SDVO pixel
replication factor appropriately. We already set up the infoframe PRB
values correctly via the infoframe helpers.
There is no cap we can check for this. The spec says that 1X,2X,4X are
mandatory, anything else is optional. 1X and 2X are all we need so
we should be able to assume they work.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200108181242.13650-7-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
The code assumes that DRM_MODE_FLAG_DBLCLK means that we enable the
pixel repeat feature. That only works with HDMI since it requires
AVI infoframe to signal the information to the sink. Hence even if
the mode dotclock would be valid we cannot currently assume that
we can just ignore the DBLCLK flag. Reject it for DVI sinks.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200108181242.13650-6-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
The SDVO/HDMI port register limited color range bit can only be used
with TMDS encoding and not SDVO encoding, ie. to be used only when
using the port as a HDMI port as opposed to a SDVO port. The SDVO
spec does have a note that some GMCHs might allow that, but gen4
bspec vehemently disagrees. I suppose on ILK+ it might work since
the color range handling is on the CPU side rather than on the PCH
side, so there is no clear linkage between the TMDS vs. SDVO
encoding and color range. Alas, I have no hardware to test that
theory.
To implement limited color range support for SDVO->HDMI we need to
ask the SDVO device to do the range compression. Do so, but first
check if the device even supports the colorimetry selection.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200108181242.13650-5-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
Some objects we map once during their construction, and then never
access their mappings again, even if they are kept around for the
duration of the driver. Keeping those pages mapped, often vmapped, is
therefore wasteful and we should release the maps as soon as we no
longer need them.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200708173748.32734-3-chris@chris-wilson.co.uk
As we have a pin_map interface, that knows how to flush the data to the
device, use it. The only downside is that we keep the kmap around, as
once acquired we keep the mapping cached until the object's backing
store is released.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200708173748.32734-2-chris@chris-wilson.co.uk
We removed retiring requests from the shrinker in order to decouple the
mutexes from reclaim in preparation for unravelling the struct_mutex.
The impact of not retiring is that we are much less agressive in making
global objects available for shrinking, as such objects remain pinned
until they are flushed by a heartbeat pulse following the last retired
request along their timeline. In order to ensure that pulse occurs in
time for memory reclamation, we should kick it from kswapd.
The catch is that we have added some flush_work() into the retirement
phase (to ensure that we reach a global idle in a timely manner), but
these flush_work() are not eligible (i.e do not belong to WQ_MEM_RELCAIM)
for use from inside kswapd. To avoid flushing those workqueues, we teach
the retirer not to do so unless we are actually waiting, and only do the
plain retire from inside the shrinker.
Note that for execlists, we already retire completed contexts as they
are scheduled out, so it should not be keeping global state
unnecessarily pinned. The legacy ringbuffer however...
References: 9e9539800d ("drm/i915: Remove waiting & retiring from shrinker paths")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200708173748.32734-1-chris@chris-wilson.co.uk
In line with what happened for other gt-related features, move the sseu
debugfs files under gt/.
The sseu_status debugfs has also been kept at the top level as we do
have tests that use it; it will be removed once we teach the tests to
look into the new path.
Suggested-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Andi Shyti <andi.shyti@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200708003952.21831-10-daniele.ceraolospurio@intel.com
Ahead of moving the sseu debugfs logic under gt/, update the functions
to use intel_gt where possible to make the move cleaner.
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Andi Shyti <andi.shyti@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200708003952.21831-9-daniele.ceraolospurio@intel.com
SSEUs are a GT capability, so track them under gt_info.
Signed-off-by: Venkata Sandeep Dhanalakota <venkata.s.dhanalakota@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Andi Shyti <andi.shyti@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200708003952.21831-8-daniele.ceraolospurio@intel.com
Keep all the SSEU code in the relevant file. The code has also been
updated to use intel_gt instead of dev_priv.
Based on an original patch by Sandeep.
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Andi Shyti <andi.shyti@intel.com>
Cc: Venkata Sandeep Dhanalakota <venkata.s.dhanalakota@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200708003952.21831-7-daniele.ceraolospurio@intel.com
We already call 2 gt-related init_mmio functions in driver_mmio_probe
and a 3rd one will be added by a follow-up patch, so pre-emptively
introduce a gt_init_mmio function to group them.
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Andi Shyti <andi.shyti@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200708003952.21831-6-daniele.ceraolospurio@intel.com
Since the engines belong to the GT, move the runtime-updated list of
available engines to the intel_gt struct. The original mask has been
renamed to indicate it contains the maximum engine list that can be
found on a matching device.
In preparation for other info being moved to the gt in follow up patches
(sseu), introduce an intel_gt_info structure to group all gt-related
runtime info.
v2: s/max_engine_mask/platform_engine_mask (tvrtko), fix selftest
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Andi Shyti <andi.shyti@intel.com>
Cc: Venkata Sandeep Dhanalakota <venkata.s.dhanalakota@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> #v1
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200708003952.21831-5-daniele.ceraolospurio@intel.com
All the info we read in intel_device_info_init_mmio are engine-related
and since we already have an engine_init_mmio function we can just
perform the operations from there.
v2: clarify comment about forcewake requirements and pruning (Chris)
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Andi Shyti <andi.shyti@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> #v1
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200708003952.21831-4-daniele.ceraolospurio@intel.com
A follow up patch will move the engine mask under the gt structure,
so get ready for that.
v2: switch the remaining gvt case using dev_priv->gt to gvt->gt (Chris)
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Andi Shyti <andi.shyti@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> #v1
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200708003952.21831-3-daniele.ceraolospurio@intel.com
Use intel_<uncore/de>_read instead of I915_READ to read the
informational registers.
Extended from an original sseu-only patch by Sandeep.
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Andi Shyti <andi.shyti@intel.com>
Cc: Venkata Sandeep Dhanalakota <venkata.s.dhanalakota@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200708003952.21831-2-daniele.ceraolospurio@intel.com
Based on the platform, Bspec expects us to wait or poll with
timeout for DDI BUF IDLE bit to be set to 0 (non idle) or get active
after enabling DDI_BUF_CTL.
v2:
* Based on platform, fixed delay or poll (Ville)
* Use a helper to do this (Imre, Ville)
v3:
* Add a new function _active for DDI BUF CTL to be non idle (Ville)
v4:
* Use the timeout for GLK (Ville)
v5:
* Add bspec quote, change timeout to 500us (Ville)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200701221052.8946-2-manasi.d.navare@intel.com
Modify the helper to add a fixed delay or poll with timeout
based on platform specification to check for either Idle bit
set (DDI_BUF_CTL is idle for disable case)
v2:
* Use 2 separate functions or idle and active (Ville)
v3:
* Change the timeout to 16usecs (Ville)
v4:
* Change the timeout 8, follow spec (Ville)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200701221052.8946-1-manasi.d.navare@intel.com
Firmware "Selected" state is a transient state - we don't expect to see
it after finishing driver probe, we even have asserts sprinkled over
i915 to confirm whether that's the case.
Unfortunately - we don't handle the transition out of "Selected" in case
of GuC fetch error, leading those asserts to fire when calling
"intel_huc_is_used()".
v2: Add dbg print when moving HuC into error state (Daniele)
Reported-by: Marcin Bernatowicz <marcin.bernatowicz@intel.com>
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Marcin Bernatowicz <marcin.bernatowicz@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200708100843.297655-2-michal@hardline.pl
It has been pointed out that information about HuC usage doesn't belong
in guc_info debugfs. Let's move "supported/used/wanted" matrix to a
separate debugfs file, keeping guc_info strictly about GuC.
Suggested-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Lukasz Fiedorowicz <lukasz.fiedorowicz@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200708100843.297655-1-michal@hardline.pl
