A series of SNDRV_CTL_TLVO_XXX macro was introduced for position offset
of TLV data. This commit applies a code optimization.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch adds new controls to set the effect levels on the R3Di and
SBZ. It also adds vmaster controls to control all surround sound
channels. So that Surround effect switch doesn't conflict with Surround
volume, FX: prefix added to all effect related switches.
Tested-by: Mariusz Ceier <mceier+kernel@gmail.com>
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add function to set vipsource on cards that use_alt_controls. Different
sequence. Also, add cvoice_switch_set at end of ca0132_select_in so that
when switching between inputs cvoice state is maintained.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Adds lookup table for floating point decibel volume, and new functions
to allow for setting the decibel level on the DSP.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch adds the ability to change the src_id on scp commands, which
is used in the dsp setup of the Recon3Di and the Sound Blaster Z. It
also makes sure to maintain backwards compatibility with the older
dspio_set_uint_param function, and sets it's src to the default 0x20.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Adds dsp setup functions for Recon3Di as well as the GPIO functions
specific to it.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add dsp setup related functions for the Sound Blaster Z, along with
other helper functions.
Also, add sbz_dsp_startup_check, which fixes a bug where the card
sometimes starts up and has no sound.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch updates core functions to accommodate the Sound Blaster Z and
Recon3Di by changing which functions they use. It also adds the ability
to enable/disable streams.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch adds extra init functions for the Sound Blaster Z and
Recon3Di. It also adds more checks to make sure that the DSP isn't
downloaded twice on startup, by checking if the dsp_state is already set
to DSP_DOWNLOADED. It also adds the ability to re-download the DSP on a
resume.
It also changes the init verbs table to apply to all codecs, and takes
the two specific end verbs and puts them into a separate function in
ca0132_init instead.
GPIO functions are also added.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch adds extra functions for shutdown on the Sound Blaster Z and
Recon3Di. The Recon3Di only has one specific functions, which sets the
GPIO data pins to 0 to prevent a popping noise.
The Sound Blaster Z exit sequence was taken from Windows. Without this
exit function, the card will not reload properly unless the PC has been
shutdown to clear the onboard memory. There are commented out functions
currently in the sbz_exit_chip function that are added in a later patch.
Also, a reboot notify function has been added, to make sure these
functions are ran before a reboot. This helps when using the card
through VFIO in a virtual machine, to make sure the card reloads the DSP
properly.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch adds iomapping for the region2 section of memory on the SBZ.
This memory region is used in later patches for setting inputs and
outputs. If the mapping fails, the quirk is changed back to QUIRK_NONE
to avoid attempts to write to uninitialized memory.
It also adds a new exit sequence to unmap the iomem for the SBZ.
[ Reordered linux/*.h inclusion in the patch by tiwai ]
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch adds an unsolicited response tag for the front headphone
panel which uses the same hp_callback as the rear headphone detection.
This patch also adds pincfgs for the R3Di and SBZ which were taken from
the Windows driver. The pins are also defined in the function
ca0132_config. Both the R3Di and SBZ are also given a max out channel
value of 6 to handle 5.1 surround sound in later patches.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch adds PCI quirk ID's for the Sound Blaster Z and Recon3Di.
Only the currently tested ID's have been added.
This patch also adds the ability to load alternative firmwares for each
card, the firmwares can be obtained from within the Windows driver.
The Recon3Di uses "ctefx-r3di.bin" and the Sound Blaster Z uses
"ctefx-sbz.bin". If the alternative firmware for the given quirk is not
found, the original ctefx.bin will be used. This has been confirmed to
work for both the R3Di and the SBZ.
This patch also makes the character array *dirstr a const.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
DECLARE_TLV_DB_SCALE (alias of SNDRV_CTL_TLVD_DECLARE_DB_SCALE) is used but
tlv.h is not included. This causes build failure when local macro is
defined by comment-out.
This commit fixes the bug. At the same time, the alias macro is replaced
with a destination macro added at a commit 46e860f768 ("ALSA: rename
TLV-related macros so that they're friendly to user applications")
Reported-by: Connor McAdams <conmanx360@gmail.com>
Fixes: 44f0c9782c ('ALSA: hda/ca0132: Add tuning controls')
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The DP-MST support requires more PCM streams than usual, hence
CONFIG_SND_DYNAMIC_MINORS is almost mandatory. Currently the driver
just warns and continues even if streams are missing, but it doesn't
seem to enough convince users to switch to the modern setup.
This patch adds the enforced selection of CONFIG_SND_DYNAMIC_MINORS
from CONFIG_SND_HDA_CODEC_HDMI for covering that.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When CONFIG_SND_DYNAMIC_MINORS isn't set, there are only limited
number of devices available, and HD-audio, especially with HDMI/DP
codec, will fail to create more than two devices.
The driver warns about the lack of such devices and skips the PCM
device creations, but the HDMI driver still tries to create the
corresponding JACK, SPDIF and ELD controls even for the non-existing
PCM substreams. This results in confusion on user-space, and even may
break the operation.
Similarly, Intel HDMI/DP codec builds the ELD notification from i915
graphics driver, and this may be broken if a notification is sent for
the non-existing PCM stream.
This patch adds the check of the existence of the assigned PCM
substream in the both scenarios above, and skips the further operation
if the PCM substream is not assigned.
Fixes: 9152085def ("ALSA: hda - add DP MST audio support")
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
On this Lenovo ThinkCentre machine. There are two front mics,
we change the location for one of them.
Relation: f33f79f3d0 ("ALSA: hda/realtek - change the location for
one of two front microphones")
Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
As recently Smatch suggested, one place in HD-audio hwdep ioctl codes
may expand the array directly from the user-space value with
speculation:
sound/pci/hda/hda_local.h:467 get_wcaps() warn: potential spectre issue 'codec->wcaps'
As get_wcaps() itself is a fairly frequently called inline function,
and there is only one single call with a user-space value, we replace
only the latter one to open-code locally with array_index_nospec()
hardening in this patch.
BugLink: https://marc.info/?l=linux-kernel&m=152411496503418&w=2
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add ALC255 its own depop functions for alc_init and alc_shutup.
Assign it to ALC256 usage.
Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Fill COEF to change EAPD to verb control.
Assigned codec type.
This is an additional fix over 92f974df34 ("ALSA: hda/realtek - New
vendor ID for ALC233").
[ More notes:
according to Kailang, the chip is 10ec:0235 bonding for ALC233b,
which is equivalent with ALC255. It's only used for Lenovo.
The chip needs no alc_process_coef_fw() for headset unlike ALC255. ]
Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Put WARN_ON() and bail out if the given index is over the allocated
array of the given SPDIF controls. It's merely a sanity check to
catch any potential issues (if any).
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Introduce a new helper macro, snd_array_for_each(), to iterate for
each snd_array element. It slightly improves the readability than
lengthy open codes at each place.
Along with it, add const prefix to some obvious places.
There should be no functional changes by this.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
A few small fixes:
- A fix for the NULL-dereference in rawmidi compat ioctls, triggered
by fuzzer
- HD-audio Realtek codec quirks, a VIA controller fixup
- A long-standing bug fix in LINE6 MIDI
-----BEGIN PGP SIGNATURE-----
iQJCBAABCAAsFiEEIXTw5fNLNI7mMiVaLtJE4w1nLE8FAlrZq6YOHHRpd2FpQHN1
c2UuZGUACgkQLtJE4w1nLE+jhRAA0cUbR2PWgeFURaw2jntFSUafNxVefuquR+MD
/Y43swY+q5ufKKtvEKG3u2u9R5gp/u/Oo95P5uDGg6FwftNJQphi6xEYNkaZAPH2
4maEZjWCerNDOgpuhczBSzW7CmQa4nQoKVj/kjtoTHuhMBtsNJyIZ3PyGdYi/2Ya
pGOSoivGk+S/PFDxYmZobMxkTJ85FnPyH9vE30kVQaqMXjpZ/ZH5KpN2aTPa0UiD
K1CcgoDZoJqWm0jp621X3O396y3Pby9qkUoeQM0mzcypufbDq91mik/ZfJXAOUDy
LKsol+luKerXmqRbKamP2C0lfSJiMntedd4QowUTMbJ6oWtyLP9gQ7QXsAKqMmZ4
rtPlLSD7qMTlYCcqFHXnMHwicUjiL8SRF969FmH2iULuyWUcvuqCxw+or3x5H8hb
aJzftV1pRnqNBFeAKhfFUxWLO5s8q+e8PMRya6UNcJw9ZDQr3wu2Gd8hW8d4XADu
KusEuZZNMkxasdirs980OKFvCxR+kLgqmpzbTAyqgDVWyU4QAfBcjyKEXLVW53oY
LkEhwe9i/hEpW/lObkJOqrlpG/Xv/yoiD0Bydlr6fW5GV16jtyXLsGVQ5+jhZa+E
Db6WHu972c7AICL0hYT7bBx62pLfVjgfD7PrIkREzrHZnKeoheSRDveg6ISHzJd7
ZhGWfoI=
=fb42
-----END PGP SIGNATURE-----
Merge tag 'sound-4.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A few small fixes:
- a fix for the NULL-dereference in rawmidi compat ioctls, triggered
by fuzzer
- HD-audio Realtek codec quirks, a VIA controller fixup
- a long-standing bug fix in LINE6 MIDI"
* tag 'sound-4.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: rawmidi: Fix missing input substream checks in compat ioctls
ALSA: hda/realtek - adjust the location of one mic
ALSA: hda/realtek - set PINCFG_HEADSET_MIC to parse_flags
ALSA: hda - New VIA controller suppor no-snoop path
ALSA: line6: Use correct endpoint type for midi output
There are two front mics on this machine, if we don't adjust the
location for one of them, they will have the same mixer name,
pulseaudio can't handle this situation.
After applying this FIXUP, they will have different mixer name,
then pulseaudio can handle them correctly.
Cc: <stable@vger.kernel.org>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Otherwise, the pin will be regarded as microphone, and the jack name
is "Mic Phantom", it is always on in the pulseaudio even nothing is
plugged into the jack. So the UI is confusing to users since the
microphone always shows up in the UI even there is no microphone
plugged.
After adding this flag, the jack name is "Headset Mic Phantom", then
the pulseaudio can handle its detection correctly.
Fixes: f0ba9d699e ("ALSA: hda/realtek - Fix Dell headset Mic can't record")
Cc: <stable@vger.kernel.org>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch is used to tell kernel that new VIA HDAC controller also
support no-snoop path.
[ minor coding style fix by tiwai ]
Signed-off-by: David Wang <davidwang@zhaoxin.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
-----BEGIN PGP SIGNATURE-----
iQIcBAABAgAGBQJaz/QFAAoJEAx081l5xIa+rlAQAImeYZMp5e8V1NjPORwUmp+N
VxHNErPc01vjTYqq2CNL+koJ1Rlq+cLbJZzHy3MT32U4jWVGykehMNmLah5fK55+
nhgV5Ho/0OXqjWeI+trGpmg1BiEmoCP2dJOyugP9J9lo55k9mvzj5RoSDGAuAaiH
jSrT2d4vnhvVFqNywBoqT5nGPgv0lqyp4o79jNykj9b8bGIU85K+KEhFzK7OXmtT
suHJE7tfSriC5nsez/TNpQf2tvfbQM6cHOdmd6pk6NllxJWLq0YSUWIKJr7DolPh
9s7FMHd1uwyEVMfoXVU8+5M0KirW8VwgUaWC6AwC75BMONH74OAlXFv9YnFiysSf
mRsjtI1iJMn5Ri4I3VEghyc9/34ejaSxq9mfe5rc5AUpRt7QhPV16I/sm0E82/88
bVymPJUpPnWERfs9p4VngNsV7hDCuXgrQWUCED0GRtEVcElKHIip/9RR6G4tB8HH
qS2QZwaFZLpAncXldqirx8MO8xqZi2amab9O+GDpTMkyqT2+S66bnAw4LCmRbqTj
Jw9JTY4Hb3P1pgYKCjJyLZzJXYw3+DvLMnwWdMe8g0Ms9sr2sqHuNBg4IeJt13qy
DIyfks43eJtT8H5YEvyTFtBYNck26u3h2VBpMcXacadeNM5HeWA1lBwCVURC7Cwu
MkeLcYcTVlQFjehkV0mL
=WE2n
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-for-v4.17-rc1' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"One omap, and one alsa pm fix (we merged the breaking patch via drm
tree).
Otherwise it's two bunches of amdgpu fixes, removing an unneeded file,
some DC fixes, HDMI audio regression fix, and some vega12 fixes"
* tag 'drm-fixes-for-v4.17-rc1' of git://people.freedesktop.org/~airlied/linux: (27 commits)
Revert "drm/amd/display: disable CRTCs with NULL FB on their primary plane (V2)"
Revert "drm/amd/display: fix dereferencing possible ERR_PTR()"
drm/amd/display: Fix regamma not affecting full-intensity color values
drm/amd/display: Fix FBC text console corruption
drm/amd/display: Only register backlight device if embedded panel connected
drm/amd/display: fix brightness level after resume from suspend
drm/amd/display: HDMI has no sound after Panel power off/on
drm/amdgpu: add MP1 and THM hw ip base reg offset
drm/amdgpu: fix null pointer panic with direct fw loading on gpu reset
drm/radeon: add PX quirk for Asus K73TK
drm/omap: fix crash if there's no video PLL
drm/amdgpu: Fix memory leaks at amdgpu_init() error path
drm/amdgpu: Fix PCIe lane width calculation
drm/radeon: Fix PCIe lane width calculation
drm/amdgpu/si: implement get/set pcie_lanes asic callback
drm/amdgpu: Add support for SRBM selection v3
Revert "drm/amdgpu: Don't change preferred domian when fallback GTT v5"
drm/amd/powerply: fix power reading on Fiji
drm/amd/powerplay: Enable ACG SS feature
drm/amdgpu/sdma: fix mask in emit_pipeline_sync
...
This became a large update. The changes are scattered widely,
and majority of them are attributed to ASoC componentization.
The gitk output made me dizzy, but it's slightly better than
London tube.
OK, below are some highlights:
- Continued hardening works in ALSA PCM core; most of the
existing syzkaller reports should have been covered.
- USB-audio got the initial USB Audio Class 3 support, as well
as UAC2 jack detection support and more DSD-device support.
- ASoC componentization: finally each individual driver was
converted to components framework, which is more future-proof
for further works. Most of conversations were systematic.
- Lots of fixes for Intel Baytrail / Cherrytrail devices with
Realtek codecs, typically tablets and small PCs.
- Fixes / cleanups for Samsung Odroid systems
- Cleanups in Freescale SSI driver
- New ASoC drivers:
* AKM AK4458 and AK5558 codecs
* A few AMD based machine drivers
* Intel Kabylake machine drivers
* Maxim MAX9759 codec
* Motorola CPCAP codec
* Socionext Uniphier SoCs
* TI PCM1789 and TDA7419 codecs
- Retirement of Blackfin drivers along with architecture removal.
-----BEGIN PGP SIGNATURE-----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=F3q1
-----END PGP SIGNATURE-----
Merge tag 'sound-4.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"This became a large update. The changes are scattered widely, and the
majority of them are attributed to ASoC componentization. The gitk
output made me dizzy, but it's slightly better than London tube.
OK, below are some highlights:
- Continued hardening works in ALSA PCM core; most of the existing
syzkaller reports should have been covered.
- USB-audio got the initial USB Audio Class 3 support, as well as
UAC2 jack detection support and more DSD-device support.
- ASoC componentization: finally each individual driver was converted
to components framework, which is more future-proof for further
works. Most of conversations were systematic.
- Lots of fixes for Intel Baytrail / Cherrytrail devices with Realtek
codecs, typically tablets and small PCs.
- Fixes / cleanups for Samsung Odroid systems
- Cleanups in Freescale SSI driver
- New ASoC drivers:
* AKM AK4458 and AK5558 codecs
* A few AMD based machine drivers
* Intel Kabylake machine drivers
* Maxim MAX9759 codec
* Motorola CPCAP codec
* Socionext Uniphier SoCs
* TI PCM1789 and TDA7419 codecs
- Retirement of Blackfin drivers along with architecture removal"
* tag 'sound-4.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (497 commits)
ALSA: pcm: Fix UAF at PCM release via PCM timer access
ALSA: usb-audio: silence a static checker warning
ASoC: tscs42xx: Remove owner assignment from i2c_driver
ASoC: mediatek: remove "simple-mfd" in the example
ASoC: cpcap: replace codec to component
ASoC: Intel: bytcr_rt5651: don't use codec anymore
ASoC: amd: don't use codec anymore
ALSA: usb-audio: fix memory leak on cval
ALSA: pcm: Fix mutex unbalance in OSS emulation ioctls
ASoC: topology: Fix kcontrol name string handling
ALSA: aloop: Mark paused device as inactive
ALSA: usb-audio: update clock valid control
ALSA: usb-audio: UAC2 jack detection
ALSA: pcm: Return -EBUSY for OSS ioctls changing busy streams
ALSA: pcm: Avoid potential races between OSS ioctls and read/write
ALSA: usb-audio: Integrate native DSD support for ITF-USB based DACs.
ALSA: usb-audio: FIX native DSD support for TEAC UD-501 DAC
ALSA: usb-audio: Add native DSD support for Luxman DA-06
ALSA: usb-audio: fix uac control query argument
ASoC: nau8824: recover system clock when device changes
...
The system sleep PM ops azx_suspend() and azx_resume() were previously
called by vga_switcheroo, but commit 07f4f97d7b ("vga_switcheroo: Use
device link for HDA controller") removed their invocation.
Unfortunately the commit neglected to update the #ifdef surrounding the
two functions, so if CONFIG_PM_SLEEP is *not* enabled but all three of
CONFIG_PM, CONFIG_VGA_SWITCHEROO and CONFIG_SND_HDA_CODEC_HDMI *are*
enabled, the compiler now emits the following warning:
sound/pci/hda/hda_intel.c:1024:12: warning: 'azx_resume' defined but not used [-Wunused-function]
static int azx_resume(struct device *dev)
^~~~~~~~~~
sound/pci/hda/hda_intel.c:989:12: warning: 'azx_suspend' defined but not used [-Wunused-function]
static int azx_suspend(struct device *dev)
^~~~~~~~~~~
Silence by updating the #ifdef. Because the #ifdef block now uses the
same condition as the one immediately succeeding it, the two blocks can
be collapsed together, shaving off another two lines.
Fixes: 07f4f97d7b ("vga_switcheroo: Use device link for HDA controller")
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Link: https://patchwork.kernel.org/patch/10313441/
Link: https://patchwork.freedesktop.org/patch/msgid/b8e70e34a9acbd4f0a1a6c7673cea96888ae9503.1522323444.git.lukas@wunner.de
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJauCZfAAoJEHm+PkMAQRiGWGUH/2rhdQDkoJpYWnjaQkolECG8
MxpGE7nmIIHxQcbSDdHTGJ8IhVm6Z5wZ7ym/PwCDTT043Y1y341sJrIwL2/nTG6d
HVidk8hFvgN6QzlzVAHT3ZZMII/V9Zt+VV5SUYLGnPAVuJNHo/6uzWlTU5g+NTFo
IquFDdQUaGBlkKqby+NoAFnkV1UAIkW0g22cfvPnlO5GMer0gusGyVNvVp7TNj3C
sqj4Hvt3RMDLMNe9RZ2pFTiOD096n8FWpYftZneUTxFImhRV3Jg5MaaYZm9SI3HW
tXrv/LChT/F1mi5Pkx6tkT5Hr8WvcrwDMJ4It1kom10RqWAgjxIR3CMm448ileY=
=YKUG
-----END PGP SIGNATURE-----
Backmerge tag 'v4.16-rc7' into drm-next
Linux 4.16-rc7
This was requested by Daniel, and things were getting
a bit hard to reconcile, most of the conflicts were
trivial though.
It will have a chance speaker no sound after system resume.
To toggle NID 0x53 index 0x2 bit 15 will solve this issue.
This usage will also suitable with ALC256.
Fixes: 4a219ef8f3 ("ALSA: hda/realtek - Add ALC256 HP depop function")
Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This platform was hardware fixed type for CTIA type for headset port.
Assigned 0x19 verb will fix can't record issue.
Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We've observed too long probe time with Coffee Lake (CFL) machines,
and the likely cause is some communication problem between the
HD-audio controller and the codec chips. While the controller expects
an IRQ wakeup for each codec response, it seems sometimes missing, and
it takes one second for the controller driver to time out and read the
response in the polling mode.
Although we aren't sure about the real culprit yet, in this patch, we
put a workaround by forcing the polling mode as default for CFL
machines; the polling mode itself isn't too heavy, and much better
than other workarounds initially suggested (e.g. disabling
power-save), at least.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=199007
Fixes: e79b0006c4 ("ALSA: hda - Add Coffelake PCI ID")
Reported-and-tested-by: Hui Wang <hui.wang@canonical.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Some HP laptops have a mute mute LED controlled by a pin VREF. The
Realtek codec driver updates the VREF via vmaster hook by calling
snd_hda_set_pin_ctl_cache().
This works fine as long as the driver is running in a normal mode.
However, when the VREF change happens during the codec being in
runtime PM suspend, the regmap access will skip and postpone the
actual register change. This ends up with the unchanged LED status
until the next runtime PM resume even if you change the Master mute
switch. (Interestingly, the machine keeps the LED status even after
the codec goes into D3 -- but it's another story.)
For improving this usability, let the driver temporarily powering up /
down only during the pin VREF change. This can be achieved easily by
wrapping the call with snd_hda_power_up_pm() / *_down_pm().
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=199073
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Back in 2013, runtime PM for GPUs with integrated HDA controller was
introduced with commits 0d69704ae3 ("gpu/vga_switcheroo: add driver
control power feature. (v3)") and 246efa4a07 ("snd/hda: add runtime
suspend/resume on optimus support (v4)").
Briefly, the idea was that the HDA controller is forced on and off in
unison with the GPU.
The original code is mostly still in place even though it was never a
100% perfect solution: E.g. on access to the HDA controller, the GPU
is powered up via vga_switcheroo_runtime_resume_hdmi_audio() but there
are no provisions to keep it resumed until access to the HDA controller
has ceased: The GPU autosuspends after 5 seconds, rendering the HDA
controller inaccessible.
Additionally, a kludge is required when hda_intel.c probes: It has to
check whether the GPU is powered down (check_hdmi_disabled()) and defer
probing if so.
However in the meantime (in v4.10) the driver core has gained a feature
called device links which promises to solve such issues in a clean way:
It allows us to declare a dependency from the HDA controller (consumer)
to the GPU (supplier). The PM core then automagically ensures that the
GPU is runtime resumed as long as the HDA controller's ->probe hook is
executed and whenever the HDA controller is accessed.
By default, the HDA controller has a dependency on its parent, a PCIe
Root Port. Adding a device link creates another dependency on its
sibling:
PCIe Root Port
^ ^
| |
| |
HDA ===> GPU
The device link is not only used for runtime PM, it also guarantees that
on system sleep, the HDA controller suspends before the GPU and resumes
after the GPU, and on system shutdown the HDA controller's ->shutdown
hook is executed before the one of the GPU. It is a complete solution.
Using this functionality is as simple as calling device_link_add(),
which results in a dmesg entry like this:
pci 0000:01:00.1: Linked as a consumer to 0000:01:00.0
The code for the GPU-governed audio power management can thus be removed
(except where it's still needed for legacy manual power control).
The device link is added in a PCI quirk rather than in hda_intel.c.
It is therefore legal for the GPU to runtime suspend to D3cold even if
the HDA controller is not bound to a driver or if CONFIG_SND_HDA_INTEL
is not enabled, for accesses to the HDA controller will cause the GPU to
wake up regardless if they're occurring outside of hda_intel.c (think
config space readout via sysfs).
Contrary to the previous implementation, the HDA controller's power
state is now self-governed, rather than GPU-governed, whereas the GPU's
power state is no longer fully self-governed. (The HDA controller needs
to runtime suspend before the GPU can.)
It is thus crucial that runtime PM is always activated on the HDA
controller even if CONFIG_SND_HDA_POWER_SAVE_DEFAULT is set to 0 (which
is the default), lest the GPU stays awake. This is achieved by setting
the auto_runtime_pm flag on every codec and the AZX_DCAPS_PM_RUNTIME
flag on the HDA controller.
A side effect is that power consumption might be reduced if the GPU is
in use but the HDA controller is not, because the HDA controller is now
allowed to go to D3hot. Before, it was forced to stay in D0 as long as
the GPU was in use. (There is no reduction in power consumption on my
Nvidia GK107, but there might be on other chips.)
The code paths for legacy manual power control are adjusted such that
runtime PM is disabled during power off, thereby preventing the PM core
from resuming the HDA controller.
Note that the device link is not only added on vga_switcheroo capable
systems, but for *any* GPU with integrated HDA controller. The idea is
that the HDA controller streams audio via connectors located on the GPU,
so the GPU needs to be on for the HDA controller to do anything useful.
This commit implicitly fixes an unbalanced runtime PM ref upon unbind of
hda_intel.c: On ->probe, a runtime PM ref was previously released under
the condition "azx_has_pm_runtime(chip) || hda->use_vga_switcheroo", but
on ->remove a runtime PM ref was only acquired under the first of those
conditions. Thus, binding and unbinding the driver twice on a
vga_switcheroo capable system caused the runtime PM refcount to drop
below zero. The issue is resolved because the AZX_DCAPS_PM_RUNTIME flag
is now always set if use_vga_switcheroo is true.
For more information on device links please refer to:
https://www.kernel.org/doc/html/latest/driver-api/device_link.html
Documentation/driver-api/device_link.rst
Cc: Dave Airlie <airlied@redhat.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Tested-by: Kai Heng Feng <kai.heng.feng@canonical.com> # AMD PowerXpress
Tested-by: Mike Lothian <mike@fireburn.co.uk> # AMD PowerXpress
Tested-by: Denis Lisov <dennis.lissov@gmail.com> # Nvidia Optimus
Tested-by: Peter Wu <peter@lekensteyn.nl> # Nvidia Optimus
Tested-by: Lukas Wunner <lukas@wunner.de> # MacBook Pro
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Link: https://patchwork.freedesktop.org/patch/msgid/51bd38360ff502a8c42b1ebf4405ee1d3f27118d.1520068884.git.lukas@wunner.de
Icelake is a next generation Intel platform. Add PCI ID for
it.
Signed-off-by: Guneshwor Singh <guneshwor.o.singh@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
With the commit 1ba8f9d308 ("ALSA: hda: Add a power_save
blacklist"), we changed the default value of power_save option to -1
for processing the power-save blacklist.
Unfortunately, this seems breaking user-space applications that
actually read the power_save parameter value via sysfs and judge /
adjust the power-saving status. They see the value -1 as if the
power-save is turned off, although the actual value is taken from
CONFIG_SND_HDA_POWER_SAVE_DEFAULT and it can be a positive.
So, overall, passing -1 there was no good idea. Let's partially
revert it -- at least for power_save option default value is restored
again to CONFIG_SND_HDA_POWER_SAVE_DEFAULT. Meanwhile, in this patch,
we keep the blacklist behavior and make is adjustable via the new
option, pm_blacklist.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=199073
Fixes: 1ba8f9d308 ("ALSA: hda: Add a power_save blacklist")
Acked-by: Hans de Goede <hdegoede@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch adds missing initialisation for HP 2013 UltraSlim Dock
Line-In/Out PINs and activates keyboard mute/micmute leds
for HP ProBook 640 G2
Signed-off-by: Dennis Wassenberg <dennis.wassenberg@secunet.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch adds missing initialisation for HP 2013 UltraSlim Dock
Line-In/Out PINs and activates keyboard mute/micmute leds
for HP EliteBook 820 G3
Signed-off-by: Dennis Wassenberg <dennis.wassenberg@secunet.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
One version of Lenovo Thinkpad T570 did not use ALC298
(like other Kaby Lake devices). Instead it uses ALC292.
In order to make the Lenovo dock working with that codec
the dock quirk for ALC292 will be used.
Signed-off-by: Dennis Wassenberg <dennis.wassenberg@secunet.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The dock line-out pin (NID 0x17 of ALC3254 codec) on Dell Precision
7520 may route to three different DACs, 0x02, 0x03 and 0x06. The
first two DACS have the volume amp controls while the last one
doesn't. And unfortunately, the auto-parser assigns this pin to DAC3,
resulting in the non-working volume control for the line out.
Fix it by disabling the routing to DAC3 on the corresponding pin.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=199029
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The internal mic boost on the T480 is too high. Fix this by applying the
ALC269_FIXUP_LIMIT_INT_MIC_BOOST fixup to the machine to limit the gain.
Signed-off-by: Benjamin Berg <bberg@redhat.com>
Tested-by: Benjamin Berg <bberg@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This platform was only one phone Jack.
Add dummy lineout verb to fix automute mode disable.
This just the workaround.
[ More background information:
since the platform has only a headphone jack without speaker, the
driver doesn't create the auto-mute control. Meanwhile we do update
the headset mode via the automute hook in the driver, thus with this
setup, the headset won't be updated any longer.
By adding a dummy line-out pin here, the auto-mute is added by the
driver, and the headset update is triggered properly.
Note that this is different from the other
ALC274_FIXUP_DELL_AIO_LINEOUT_VERB, which has the real line-out pin,
while this quirk adds a dummy line-out pin. -- tiwai ]
Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
With the alc289, the Pin 0x1b is Headphone-Mic, so we should assign
ALC269_FIXUP_DELL4_MIC_NO_PRESENCE rather than
ALC225_FIXUP_DELL1_MIC_NO_PRESENCE to it. And this change is suggested
by Kailang of Realtek and is verified on the machine.
Fixes: 3f2f7c553d ("ALSA: hda - Fix headset mic detection problem for two Dell machines")
Cc: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
