A typo in qca808x_read_status means we try to set SMII mode on the port
rather than SGMII when the link speed is not 2.5Gb/s. This results in no
traffic due to the mismatch in configuration between the phy and the
mac.
v2:
Only change interface mode when the link is up
Fixes: 79c7bc0521 ("net: phy: add qca8081 read_status")
Cc: stable@vger.kernel.org
Signed-off-by: Jonathan McDowell <noodles@earth.li>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
This code calls fd_install() which gives the userspace access to the fd.
Then if copy_info_records_to_user() fails it calls put_unused_fd(fd) but
that will not release it and leads to a stale entry in the file
descriptor table.
Generally you can't trust the fd after a call to fd_install(). The fix
is to delay the fd_install() until everything else has succeeded.
Fortunately it requires CAP_SYS_ADMIN to reach this code so the security
impact is less.
Fixes: f644bc449b ("fanotify: fix copy_event_to_user() fid error clean up")
Link: https://lore.kernel.org/r/20220128195656.GA26981@kili
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Mathias Krause <minipli@grsecurity.net>
Signed-off-by: Jan Kara <jack@suse.cz>
Handle non-APICv interrupt delivery in vendor code, even though it means
VMX and SVM will temporarily have duplicate code. SVM's AVIC has a race
condition that requires KVM to fall back to legacy interrupt injection
_after_ the interrupt has been logged in the vIRR, i.e. to fix the race,
SVM will need to open code the full flow anyways[*]. Refactor the code
so that the SVM bug without introducing other issues, e.g. SVM would
return "success" and thus invoke trace_kvm_apicv_accept_irq() even when
delivery through the AVIC failed, and to opportunistically prepare for
using KVM_X86_OP to fill each vendor's kvm_x86_ops struct, which will
rely on the vendor function matching the kvm_x86_op pointer name.
No functional change intended.
[*] https://lore.kernel.org/all/20211213104634.199141-4-mlevitsk@redhat.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220128005208.4008533-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch adds support for the Brainboxes US-159, US-235 and US-320
USB-to-Serial devices.
Signed-off-by: Cameron Williams <cang1@live.co.uk>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
This adds support for the iTE IT6505.
This device can convert DPI signal to DP output.
From: Allen Chen <allen.chen@ite.com.tw>
Tested-by: Hsin-yi Wang <hsinyi@chromium.org>
Signed-off-by: Hermes Wu <hermes.wu@ite.com.tw>
Signed-off-by: Allen Chen <allen.chen@ite.com.tw>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220114091502.333083-1-allen.chen@ite.com.tw
Add a bottom table border to complete the table format and prevent
a documentation build warning.
Documentation/ABI/testing/sysfs-class-power:459: WARNING: Malformed table.
No bottom table border found.
Fixes: 1b0b6cc803 ("power: supply: add charge_behaviour attributes")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Thomas Weißschuh <linux@weissschuh.net>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Sebastian Reichel <sre@kernel.org>
Cc: linux-pm@vger.kernel.org
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
When reprogramming M/N live on BDW+ we must write the LINK_N
register last as it's the one that arms the double buffered
register update for all the M/N registers. Document this so
that we don't accidentally break things.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220128103757.22461-18-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
No point in special casing the check of dp_m2_n2 on pre-bdw platforms.
Either the transcoder has M2/N2 in which case the values should be
set to something sensible, or it doesn't in which case dp_m2_n2 is
always zeroed.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220128103757.22461-17-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Program the PCH transcoder M2/N2 values appropriately. We're
still missing a few things for PCH port DRRS but at least this
means we can do readout/state check for dp_m2_n2 unconditionally.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220128103757.22461-15-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Make life simpler by always programming DP M2/N2 with a consistent
value. This will lets use do state readout+chec unconditionally.
I was first going to just set M2/N2=M1/N1 but then it occurred
to me that it might interfere with fastboot on account of BIOS
likely leaving the registers zeroed. So let's zero out the values
instead (except TU where a zero register value actually means '1').
Still not sure that's the best approach but lets go with it for
now.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220128103757.22461-14-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Currently we allow DRRS on IVB PCH ports, but we're missing a
few programming steps meaning it is guaranteed to not work.
And on HSW DRRS is not supported on anything but port A ever
as only transcoder EDP has the M2/N2 registers (though I'm
not sure if HSW ever has eDP on any other port).
Starting from BDW all transcoders have the dynamically
reprogrammable M/N registers so DRRS could work on any
port.
Stop initializing DRRS on ports where it cannot possibly work.
Cc: stable@vger.kernel.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220128103757.22461-11-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
[why]
Unlock is needed on the error handling path to prevent dead lock.
v3d_submit_cl_ioctl and v3d_submit_csd_ioctl is missing unlock.
[how]
Fix this by changing goto target on the error handling path. So
changing the goto to target an error handling path
that includes drm_gem_unlock reservations.
Signed-off-by: Yongzhi Liu <lyz_cs@pku.edu.cn>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Melissa Wen <melissa.srw@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1643377262-109975-1-git-send-email-lyz_cs@pku.edu.cn
Instead of passing in the whole crtc state let's pass in just
the bits of state we need. This will help with the DRRS code
which shouldn't really be accessing the atomic state stuff directly
as it gets called outside the normal atomic flows.
v2: Fix set_m1_n1 vs. set_m2_n2 fumble for i9xx (Jani)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220128103757.22461-7-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Make things a bit more explicit by splitting
intel_cpu_transcoder_set_m_n() into separate variants for M1/N1 vs.
M2/N2. Makes the DRRS M/N programming at least more obvious.
Note that for the MST and DRRS cases we don't need to call the
M2/N2 variant at all since the transcoders that support those
do not have the M2/N2 registers.
Same could be said for i9xx_crtc_enable() but I want to do a
higher level code sharing between that valleyview_crtc_enable()
later in which case we do need the M2/N2 variant. This is also
why I keep the transcoder_has_m2_n2() in intel_cpu_transcoder_set_m2_n2()
so the caller doesn't have necessarily care what the chosen
transcoder supports.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220128103757.22461-5-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
I want to make a clean split betwen the CPU vs. PCH transcoder
programming. To that end eliminate intel_dp_set_m_n() and just
call the individual CPU/PCH transcoder functions directly.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220128103757.22461-2-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Don't see why we should skip the wakeref tracking when the
platform doesn't support runtime pm. We still want all the
code to be 100% leak free so let's track this unconditionally.
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Marco Elver <elver@google.com> # stackdepot
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220126081539.23227-2-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
We call __save_depot_stack() unconditionally so the stack depot
must always be initialized or else we'll oops on platforms without
runtime pm support.
Presumably we've not seen this in CI due to stack_depot_init()
already getting called via drm_mm_init()+CONFIG_DRM_DEBUG_MM.
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Marco Elver <elver@google.com> # stackdepot
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Imre Deak <imre.deak@intel.com>
Fixes: 2dba5eb1c7 ("lib/stackdepot: allow optional init and stack_table allocation by kvmalloc()")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220126081539.23227-1-ville.syrjala@linux.intel.com
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Imre Deak <imre.deak@intel.com>
UAPI Changes:
- Fix invalid IN_FORMATS blob when plane->format_mod_supported is NULL.
Cross-subsystem Changes:
- Assorted dt bindings updates.
- Fix vga16fb vga checking on x86.
- Fix extra semicolon in rwsem.h's _down_write_nest_lock.
- Assorted small fixes to agp and fbdev drivers.
- Fix oops in creating a udmabuf with 0 pages.
- Hot-unplug firmware fb devices on forced removal
- Reqquest memory region in simplefb and simpledrm, and don't make the ioresource as busy.
Core Changes:
- Mock a drm_plane in drm-plane-helper selftest.
- Assorted bug fixes to device logging, dbi.
- Use DP helper for sink count in mst.
- Assorted documentation fixes.
- Assorted small fixes.
- Move DP headers to drm/dp, and add a drm dp helper module.
- Move the buddy allocator from i915 to common drm.
- Add simple pci and platform module init macros to remove a lot of boilerplate from some drivers.
- Support microsoft extension for HMDs and specialized monitors.
- Improve edid parser's deep color handling.
- Add type 7 timing support to edid parser.
- Add a weak backpointer to the ttm_bo from ttm_resource
- Add 3 eDP panels.
Driver Changes:
- Add support for HDMI and JZ4780 to ingenic.
- Add support for higher DP/eDP bitrates to nouveau.
- Assorted driver fixes to tilcdc, vmwgfx, sn65dsi83, meson, stm, panfrost, v3d, gma500, vc4, virtio, mgag200, ast, radeon, amdgpu, nouveau, various bridge drivers.
- Convert and revert exynos dsi support to bridge driver.
- Add vcc supply regulator support for sn65dsi83.
- More conversion of bridge/chipone-icn6211 to atomic.
- Remove conflicting fb's from stm, and add support for new hw version.
- Add device link in parade-ps8640 to fix suspend/resume.
- Update Boe-tv110c9m init sequence.
- Add wide screen support to AST2600.
- Fix omapdrm implicit dma_buf fencing.
- Add support for multiple overlay planes to vkms.
- Convert bridge/anx7625 to atomic, add HDCP support,
add eld support for audio, and fix HPD.
- Add driver for ChromeOS privacy screen.
- Handover display from firmware to vc4 more gracefully, and support nomodeset.
- Add flexible and ycbcr pixel formats to stm/ltdc.
- Convert exynos mipi dsi to atomic.
- Add initial dual core group GPUs support to panfrost.
- No longer add exclusive fence in amdgpu as shared fence.
- Add CSC and full range supoprt to vc4.
- Shutdown the display on system shutdown and unbind.
- Add Multi-Inno Technology MI0700S4T-6 simple panel.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEuXvWqAysSYEJGuVH/lWMcqZwE8MFAmHyiHMACgkQ/lWMcqZw
E8OLfQ//Xd1njt93nRGoQofuQkz23n2AUTAnmbwzQKcvmat8ugXbRJ5JaVQJrFpu
OQEYM46eZIyu2LekMiz4HgPK8CjS156QJ1WtltUFglOY1KLejb6HF5boBYxLkIC7
wLhkaRiwed4t7WOTrftgzpH5FNj/7Vi+Hav9l8rYRC74sWanEZNGBJL2OD9GRdlU
3tlmY8oXVAN8YDD/43Cv+foOTzLS/COI7JCFgFRhfzoFss3EVR061u55uOq18STB
UI29NusqX7/K6hQAWCKl0EQBEZWMR02/dgu3ZpOEHHAa96RgHxIuRYsIO9kvGgiF
VyW0EW6AyD/KsOSBYnsfUqkFfNchx9Xb8ZDjIhHUYxPsxe4iUJneCrdIKEmLWgSd
1bVNrltLJKBQARW4Whpy/gaiKV8RD8YVJobA/+/COeCUXCnNAT43O9aJmix/7253
Q7ORXTss5WRpuYswMWmObebf8p3IhFjTvlzzenXynl7mkaohGzHPf6SUSUZbJ8Df
PZCh17McwIEQ1BtYeegeAGM6s8lrv5+yZaY4bnkQsJNOHeab0cPqmQ8/s+hUeRtp
3VDRVhkgzz2XuTaiKia0gWcAQbdZ2KornkP4QMyDH7w0+6bsuJnNXe4L1XY9lt4J
5v411FaD61FbGDhu5PFtYI7+ZlgM0h5sqlhVkUEzbckzTF3SC9c=
=IMtm
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2022-01-27' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
[airlied: add two missing Kconfig]
drm-misc-next for v5.18:
UAPI Changes:
- Fix invalid IN_FORMATS blob when plane->format_mod_supported is NULL.
Cross-subsystem Changes:
- Assorted dt bindings updates.
- Fix vga16fb vga checking on x86.
- Fix extra semicolon in rwsem.h's _down_write_nest_lock.
- Assorted small fixes to agp and fbdev drivers.
- Fix oops in creating a udmabuf with 0 pages.
- Hot-unplug firmware fb devices on forced removal
- Reqquest memory region in simplefb and simpledrm, and don't make the ioresource as busy.
Core Changes:
- Mock a drm_plane in drm-plane-helper selftest.
- Assorted bug fixes to device logging, dbi.
- Use DP helper for sink count in mst.
- Assorted documentation fixes.
- Assorted small fixes.
- Move DP headers to drm/dp, and add a drm dp helper module.
- Move the buddy allocator from i915 to common drm.
- Add simple pci and platform module init macros to remove a lot of boilerplate from some drivers.
- Support microsoft extension for HMDs and specialized monitors.
- Improve edid parser's deep color handling.
- Add type 7 timing support to edid parser.
- Add a weak backpointer to the ttm_bo from ttm_resource
- Add 3 eDP panels.
Driver Changes:
- Add support for HDMI and JZ4780 to ingenic.
- Add support for higher DP/eDP bitrates to nouveau.
- Assorted driver fixes to tilcdc, vmwgfx, sn65dsi83, meson, stm, panfrost, v3d, gma500, vc4, virtio, mgag200, ast, radeon, amdgpu, nouveau, various bridge drivers.
- Convert and revert exynos dsi support to bridge driver.
- Add vcc supply regulator support for sn65dsi83.
- More conversion of bridge/chipone-icn6211 to atomic.
- Remove conflicting fb's from stm, and add support for new hw version.
- Add device link in parade-ps8640 to fix suspend/resume.
- Update Boe-tv110c9m init sequence.
- Add wide screen support to AST2600.
- Fix omapdrm implicit dma_buf fencing.
- Add support for multiple overlay planes to vkms.
- Convert bridge/anx7625 to atomic, add HDCP support,
add eld support for audio, and fix HPD.
- Add driver for ChromeOS privacy screen.
- Handover display from firmware to vc4 more gracefully, and support nomodeset.
- Add flexible and ycbcr pixel formats to stm/ltdc.
- Convert exynos mipi dsi to atomic.
- Add initial dual core group GPUs support to panfrost.
- No longer add exclusive fence in amdgpu as shared fence.
- Add CSC and full range supoprt to vc4.
- Shutdown the display on system shutdown and unbind.
- Add Multi-Inno Technology MI0700S4T-6 simple panel.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/456a23c6-7324-7543-0c45-751f30ef83f7@linux.intel.com
GuC updates shared memory and KMD reads it. Since this is not
synchronized, we run into a race where the value read is inconsistent.
Sometimes the inconsistency is in reading the upper MSB bytes of the
last_switch_in value. 2 types of cases are seen - upper 8 bits are zero
and upper 24 bits are zero. Since these are non-zero values, it is
not trivial to determine validity of these values. Instead we read the
values multiple times until they are consistent. In test runs, 3
attempts results in consistent values. The upper bound is set to 6
attempts and may need to be tuned as per any new occurences.
Since the duration that gt is parked can vary, the patch also updates
the gt timestamp on unpark before starting the worker.
v2:
- Initialize i
- Use READ_ONCE to access engine record
Fixes: 77cdd054dd ("drm/i915/pmu: Connect engine busyness stats from GuC to pmu")
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220125020124.788679-2-umesh.nerlige.ramappa@intel.com
(cherry picked from commit 512712a824)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
It appears like nr could be a Spectre v1 gadget as it's supplied by a
user and used as an array index. Prevent the contents
of kernel memory from being leaked to userspace via speculative
execution by using array_index_nospec.
Signed-off-by: Jordy Zomer <jordy@pwning.systems>
Fixes: c02a81fba7 ("dma-buf: Add dma-buf heaps framework")
Cc: <stable@vger.kernel.org> # v5.6+
Acked-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
[sumits: added fixes and cc: stable tags]
Link: https://patchwork.freedesktop.org/patch/msgid/20220129150604.3461652-1-jordy@pwning.systems
Fix all kernel-doc warnings in mips/kvm/vz.c as reported by the
kernel test robot:
arch/mips/kvm/vz.c:471: warning: Function parameter or member 'out_compare' not described in '_kvm_vz_save_htimer'
arch/mips/kvm/vz.c:471: warning: Function parameter or member 'out_cause' not described in '_kvm_vz_save_htimer'
arch/mips/kvm/vz.c:471: warning: Excess function parameter 'compare' description in '_kvm_vz_save_htimer'
arch/mips/kvm/vz.c:471: warning: Excess function parameter 'cause' description in '_kvm_vz_save_htimer'
arch/mips/kvm/vz.c:1551: warning: No description found for return value of 'kvm_trap_vz_handle_cop_unusable'
arch/mips/kvm/vz.c:1552: warning: expecting prototype for kvm_trap_vz_handle_cop_unusuable(). Prototype was for kvm_trap_vz_handle_cop_unusable() instead
arch/mips/kvm/vz.c:1597: warning: No description found for return value of 'kvm_trap_vz_handle_msa_disabled'
Fixes: c992a4f6a9 ("KVM: MIPS: Implement VZ support")
Fixes: f4474d50c7 ("KVM: MIPS/VZ: Support hardware guest timer")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: linux-mips@vger.kernel.org
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com>
Cc: James Hogan <jhogan@kernel.org>
Cc: kvm@vger.kernel.org
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
This device provides both audio and video. The original quirk added in
commit 48827e1d6a ("ALSA: usb-audio: Add quirk for VF0770") used
USB_DEVICE to match the vendor and product ID. Depending on module order,
if snd-usb-audio was asked first, it would match the entire device and
uvcvideo wouldn't get to see it. Change the matching to USB_AUDIO_DEVICE
to restore uvcvideo matching in all cases.
Fixes: 48827e1d6a ("ALSA: usb-audio: Add quirk for VF0770")
Reported-by: Jukka Heikintalo <heikintalo.jukka@gmail.com>
Tested-by: Jukka Heikintalo <heikintalo.jukka@gmail.com>
Reported-by: Paweł Susicki <pawel.susicki@gmail.com>
Tested-by: Paweł Susicki <pawel.susicki@gmail.com>
Cc: <stable@vger.kernel.org> # 5.4, 5.10, 5.14, 5.15
Signed-off-by: Jonas Hahnfeld <hahnjo@hahnjo.de>
Link: https://lore.kernel.org/r/20220131183516.61191-1-hahnjo@hahnjo.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Replace acpi_bus_get_device() that is going to be dropped with
acpi_fetch_acpi_dev().
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/2828205.e9J7NaK4W3@kreacher
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Current macsec netdev notify handler handles NETDEV_UNREGISTER event by
releasing relevant SW resources only, this causes resources leak in case
of macsec HW offload, as the underlay driver was not notified to clean
it's macsec offload resources.
Fix by calling the underlay driver to clean it's relevant resources
by moving offload handling from macsec_dellink() to macsec_common_dellink()
when handling NETDEV_UNREGISTER event.
Fixes: 3cf3227a21 ("net: macsec: hardware offloading infrastructure")
Signed-off-by: Lior Nahmanson <liorna@nvidia.com>
Reviewed-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Raed Salem <raeds@nvidia.com>
Reviewed-by: Antoine Tenart <atenart@kernel.org>
Link: https://lore.kernel.org/r/1643542141-28956-1-git-send-email-raeds@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Unlike gmac100, gmac1000, gmac4 has 27 DMA registers and they are
located at DMA_CHAN_BASE_ADDR (0x1100). In order for ethtool to dump
gmac4 DMA registers correctly, this commit checks if a net_device has
gmac4 and uses different logic to dump its DMA registers.
This fixes the following KASAN warning, which can normally be triggered
by a command similar like "ethtool -d eth0":
BUG: KASAN: vmalloc-out-of-bounds in dwmac4_dump_dma_regs+0x6d4/0xb30
Write of size 4 at addr ffffffc010177100 by task ethtool/1839
kasan_report+0x200/0x21c
__asan_report_store4_noabort+0x34/0x60
dwmac4_dump_dma_regs+0x6d4/0xb30
stmmac_ethtool_gregs+0x110/0x204
ethtool_get_regs+0x200/0x4b0
dev_ethtool+0x1dac/0x3800
dev_ioctl+0x7c0/0xb50
sock_ioctl+0x298/0x6c4
...
Fixes: fbf68229ff ("net: stmmac: unify registers dumps methods")
Signed-off-by: Camel Guo <camelg@axis.com>
Link: https://lore.kernel.org/r/20220131083841.3346801-1-camel.guo@axis.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Make MediaTek MT753x DSA driver enable MediaTek Gigabit PHYs driver to
properly control MT7530 and MT7531 switch PHYs.
A noticeable change is that the behaviour of switchport interfaces going
up-down-up-down is no longer there.
Fixes: b8f126a8d5 ("net-next: dsa: add dsa support for Mediatek MT7530 switch")
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20220129062703.595-1-arinc.unal@arinc9.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
On some OEM setups users can configure the BIOS for S3 or S2idle.
When configured to S3 users can still choose 's2idle' in the kernel by
using `/sys/power/mem_sleep`. Before commit 6dc8265f98 ("drm/amdgpu:
always reset the asic in suspend (v2)"), the GPU would crash. Now when
configured this way, the system should resume but will use more power.
As such, adjust the `amdpu_acpi_is_s0ix function` to warn users about
potential power consumption issues during their first attempt at
suspending.
Reported-by: Bjoren Dasse <bjoern.daase@gmail.com>
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1824
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The existing way cannot handle Beige Goby well as a different
PPTable data structure(PPTable_beige_goby_t instead of PPTable_t)
is used there.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Fix the crash in kernel while dereferencing the NULL pointer,
when the driver is unloaded and simultaneously the VSI rings
are being stopped.
The hardware requires 50msec in order to finish RX queues
disable. For this purpose the driver spins in mdelay function
for the operation to be completed.
For example changing number of queues which requires reset would
fail in the following call stack:
1) i40e_prep_for_reset
2) i40e_pf_quiesce_all_vsi
3) i40e_quiesce_vsi
4) i40e_vsi_close
5) i40e_down
6) i40e_vsi_stop_rings
7) i40e_vsi_control_rx -> disable requires the delay of 50msecs
8) continue back in i40e_down function where
i40e_clean_tx_ring(vsi->tx_rings[i]) is going to crash
When the driver was spinning vsi_release called
i40e_vsi_free_arrays where the vsi->tx_rings resources
were freed and the pointer was set to NULL.
Fixes: 5b6d4a7f20 ("i40e: Fix crash during removing i40e driver")
Signed-off-by: Slawomir Laba <slawomirx.laba@intel.com>
Signed-off-by: Sylwester Dziedziuch <sylwesterx.dziedziuch@intel.com>
Signed-off-by: Karen Sornek <karen.sornek@intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The hisi_sas_slot.is_internal member is not set properly for ATA commands
which the driver sends directly. A TMF struct pointer is normally used as a
test to set this, but it is NULL for those commands. It's not ideal, but
pass an empty TMF struct to set that member properly.
Link: https://lore.kernel.org/r/1643627607-138785-1-git-send-email-john.garry@huawei.com
Fixes: dc313f6b12 ("scsi: hisi_sas: Factor out task prep and delivery code")
Reported-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Bounds checking when parsing init scripts embedded in the BIOS reject
access to the last byte. This causes driver initialization to fail on
Apple eMac's with GeForce 2 MX GPUs, leaving the system with no working
console.
This is probably only seen on OpenFirmware machines like PowerPC Macs
because the BIOS image provided by OF is only the used parts of the ROM,
not a power-of-two blocks read from PCI directly so PCs always have
empty bytes at the end that are never accessed.
Signed-off-by: Nick Lopez <github@glowingmonkey.org>
Fixes: 4d4e9907ff ("drm/nouveau/bios: guard against out-of-bounds accesses to image")
Cc: <stable@vger.kernel.org> # v4.10+
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220122081906.2633061-1-github@glowingmonkey.org
Currently a use-after-free may occur if a sas_task is aborted by the upper
layer before we handle the I/O completion in mpi_ssp_completion() or
mpi_sata_completion().
In this case, the following are the two steps in handling those I/O
completions:
- Call complete() to inform the upper layer handler of completion of
the I/O.
- Release driver resources associated with the sas_task in
pm8001_ccb_task_free() call.
When complete() is called, the upper layer may free the sas_task. As such,
we should not touch the associated sas_task afterwards, but we do so in the
pm8001_ccb_task_free() call.
Fix by swapping the complete() and pm8001_ccb_task_free() calls ordering.
Link: https://lore.kernel.org/r/1643289172-165636-4-git-send-email-john.garry@huawei.com
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Currently a use-after-free may occur if a TMF sas_task is aborted before we
handle the IO completion in mpi_ssp_completion(). The abort occurs due to
timeout.
When the timeout occurs, the SAS_TASK_STATE_ABORTED flag is set and the
sas_task is freed in pm8001_exec_internal_tmf_task().
However, if the I/O completion occurs later, the I/O completion still
thinks that the sas_task is available. Fix this by clearing the ccb->task
if the TMF times out - the I/O completion handler does nothing if this
pointer is cleared.
Link: https://lore.kernel.org/r/1643289172-165636-3-git-send-email-john.garry@huawei.com
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
make W=1 complains of an undescribed function parameter:
drivers/scsi/pm8001/pm80xx_hwi.c:3938: warning: Function parameter or member 'circularQ' not described in 'process_one_iomb'
Fix it.
Link: https://lore.kernel.org/r/1643289172-165636-2-git-send-email-john.garry@huawei.com
Reported-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
There was an AQ error I40E_AQ_RC_EINVAL when trying
to reset bw limit as part of bw allocation setup.
This was caused by trying to reset bw limit with
DCB enabled. Bw limit should not be reset when
DCB is enabled. The code was relying on the pf->flags
to check if DCB is enabled but if only 1 TC is available
this flag will not be set even though DCB is enabled.
Add a check for number of TC and if it is 1
don't try to reset bw limit even if pf->flags shows
DCB as disabled.
Fixes: fa38e30ac7 ("i40e: Fix for Tx timeouts when interface is brought up if DCB is enabled")
Suggested-by: Alexander Lobakin <alexandr.lobakin@intel.com> # Flatten the condition
Signed-off-by: Sylwester Dziedziuch <sylwesterx.dziedziuch@intel.com>
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Reviewed-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Tested-by: Imam Hassan Reza Biswas <imam.hassan.reza.biswas@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Syzbot tripped over the following complaint from the kernel:
WARNING: CPU: 2 PID: 15402 at mm/util.c:597 kvmalloc_node+0x11e/0x125 mm/util.c:597
While trying to run XFS_IOC_GETBMAP against the following structure:
struct getbmap fubar = {
.bmv_count = 0x22dae649,
};
Obviously, this is a crazy huge value since the next thing that the
ioctl would do is allocate 37GB of memory. This is enough to make
kvmalloc mad, but isn't large enough to trip the validation functions.
In other words, I'm fussing with checks that were **already sufficient**
because that's easier than dealing with 644 internal bug reports. Yes,
that's right, six hundred and forty-four.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Catherine Hoang <catherine.hoang@oracle.com>
