Commit Graph

187 Commits

Author SHA1 Message Date
Linus Torvalds
e10abc629f TTY and Serial driver update for 4.7-rc1
Here's the large TTY and Serial driver update for 4.7-rc1.
 
 A few new serial drivers are added here, and Peter has fixed a bunch of
 long-standing bugs in the tty layer and serial drivers as normal.  Full
 details in the shortlog.
 
 All of these have been in linux-next for a while with no reported issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iEYEABECAAYFAlc/0/oACgkQMUfUDdst+ynzyQCgsa54VNijdAzU6AA5HEfqmf2M
 cGMAn1boH7hUWlAbJmzzihx4JASoGjYW
 =V5VH
 -----END PGP SIGNATURE-----

Merge tag 'tty-4.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull tty and serial driver updates from Greg KH:
 "Here's the large TTY and Serial driver update for 4.7-rc1.

  A few new serial drivers are added here, and Peter has fixed a bunch
  of long-standing bugs in the tty layer and serial drivers as normal.
  Full details in the shortlog.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'tty-4.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (88 commits)
  MAINTAINERS: 8250: remove website reference
  serial: core: Fix port mutex assert if lockdep disabled
  serial: 8250_dw: fix wrong logic in dw8250_check_lcr()
  tty: vt, finish looping on duplicate
  tty: vt, return error when con_startup fails
  QE-UART: add "fsl,t1040-ucc-uart" to of_device_id
  serial: mctrl_gpio: Drop support for out1-gpios and out2-gpios
  serial: 8250dw: Add device HID for future AMD UART controller
  Fix OpenSSH pty regression on close
  serial: mctrl_gpio: add IRQ locking
  serial: 8250: Integrate Fintek into 8250_base
  serial: mps2-uart: add support for early console
  serial: mps2-uart: add MPS2 UART driver
  dt-bindings: document the MPS2 UART bindings
  serial: sirf: Use generic uart-has-rtscts DT property
  serial: sirf: Introduce helper variable struct device_node *np
  serial: mxs-auart: Use generic uart-has-rtscts DT property
  serial: imx: Use generic uart-has-rtscts DT property
  doc: DT: Add Generic Serial Device Tree Bindings
  serial: 8250: of: Make tegra_serial_handle_break() static
  ...
2016-05-20 20:57:27 -07:00
Andrei Pistirica
157b939470 serial: pic32_uart: Add PIC32 UART driver
This adds UART and a serial console driver for Microchip PIC32 class
devices.

[ralf@linux-mips.org: Resolved merge conflict.]

Signed-off-by: Andrei Pistirica <andrei.pistirica@microchip.com>
Signed-off-by: Joshua Henderson <joshua.henderson@microchip.com>
Reviewed-by: Alan Cox <alan@linux.intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Slaby <jslaby@suse.com>
Cc: linux-kernel@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: linux-serial@vger.kernel.org
Cc: linux-api@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/12101/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13 14:01:56 +02:00
Vladimir Murzin
bd8d257fa3 serial: mps2-uart: add support for early console
This adds support early console for MPS2 UART which can be enabled via
earlycon=mps2,0x40004000

Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-30 09:26:55 -07:00
Vladimir Murzin
041f031def serial: mps2-uart: add MPS2 UART driver
This driver adds support to the UART controller found on ARM MPS2
platform.

Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-30 09:26:55 -07:00
Oleksij Rempel
254da0d753 serial: mxs-auart: add Alphascale ASM9260 support
Alphascale ASM9260 uart IP has some common registers with
Freescale STMP37XX. This patch provide changes which
allow to reuse mxs-auart.c code for ASM9260.

Reviewed-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-30 09:26:55 -07:00
Geert Uytterhoeven
3d23b4c364 serial: Make SERIAL_MVEBU_UART depend on ARCH_MVEBU
Enabling support for the UART on Marvell EBU SoCs only make sense when
compiling for Marvell EBU SoCs, unless compile-testing.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-30 09:26:55 -07:00
Andreas Färber
736d553886 tty: serial: meson: Implement earlycon support
Split off the bulk of the existing meson_serial_console_write()
implementation into meson_serial_port_write() for implementing
meson_serial_early_console_write().

Use "meson" as the earlycon driver name, courtesy of Nicolas.

Signed-off-by: Nicolas Saenz Julienne <nicolassaenzj@gmail.com>
Acked-by: Carlo Caione <carlo@endlessm.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-30 09:26:55 -07:00
Wilson Ding
30530791a7 serial: mvebu-uart: initial support for Armada-3700 serial port
Armada-3700's uart is a simple serial port, which doesn't
support. Configuring the modem control lines. The uart port has a 32
bytes Tx FIFO and a 64 bytes Rx FIFO

The uart driver implements the uart core operations. It also support the
system (early) console based on Armada-3700's serial port.

Known Issue:

The uart driver currently doesn't support clock programming, which means
the baud-rate stays with the default value configured by the bootloader
at boot time

[gregory.clement@free-electrons.com: Rewrite many part which are too long
to enumerate]

Signed-off-by: Wilson Ding <dingwei@marvell.com>
Signed-off-by: Nadav Haklai <nadavh@marvell.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-07 16:11:14 -08:00
Simon Horman
27202f2f1d tty: sh-sci: Use ARCH_RENESAS
Make use of ARCH_RENESAS in place of ARCH_SHMOBILE.

This is part of an ongoing process to migrate from ARCH_SHMOBILE to
ARCH_RENESAS the motivation for which being that RENESAS seems to be a more
appropriate name than SHMOBILE for the majority of Renesas ARM based SoCs.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-07 16:11:14 -08:00
Rich Felker
7cdcc29e49 serial-uartlite: add earlycon support
Microblaze currently uses the old earlyprintk system, rather than the
unified earlycon support, to show boot messages on uartlite. Add
earlycon support so that other archs using uartlite can benefit from
it. The new code in uartlite.c is copied almost verbatim from
arch/microblaze/kernel/early_printk.c.

Signed-off-by: Rich Felker <dalias@libc.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-06 22:56:43 -08:00
Yoshinori Sato
0b0cced19a serial: sh-sci: Add CONFIG_SERIAL_EARLYCON support
"earlyprintk" is architecture specific option.
General "earlycon" option support is much better.

Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
[uli: preserve other SCSCR bits when asserting RE and TE]
Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
[geert: rewording, #ifdef rework]
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-06 22:51:04 -08:00
Frederik Völkel
aaa68c50b2 serial: Remove 68328 driver
It's old, messy and mostly unmaintained.
Remove it as suggested by Peter Hurley and Alan.

Signed-off-by: Frederik Völkel <frederik.voelkel@fau.de>
Signed-off-by: Lukas Braun <lukas.braun@fau.de>
Reviewed-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-06 22:37:26 -08:00
Linus Torvalds
9638685e32 ARM: SoC driver updates for v4.5
Driver updates for ARM SoCs. Some for SoC-family code under drivers/soc,
 but also some other driver updates that don't belong anywhere else. We also
 bring in the drivers/reset code through arm-soc.
 
 Some of the larger updates:
 
 - Qualcomm support for SMEM, SMSM, SMP2P. All used to communicate with other
   parts of the chip/board on these platforms, all proprietary protocols that
   don't fit into other subsystems and live in drivers/soc for now.
 
 - System bus driver for UniPhier
 - Driver for the TI Wakeup M3 IPC device
 
 - Power management for Raspberry PI
 
 + Again a bunch of other smaller updates and patches.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJWnsLfAAoJEIwa5zzehBx3KVcQAJS90XyeheS3LX+SUMsn5qAJ
 Q+NLzfYAAHZPafruOTcBATs9xUvuJM4KsdqXIWiA4gJig/ZFpF5dpDbrnhpdJFEK
 0ULSfZd9J4B4m7aBo6L8lVBEbd4i++updHpIYnmPx3tkLL0Win/VM8KlMpdOzMQN
 DncNFVIRJ80OxepdHgBu6yY7gv3Z8XhRrNukeG8EZTvHw5bJQHfjMOeAQNQWUmWa
 HLyO6uqYkca38XMJOhPhqt0mOpwh/X6ByUueIrIMpOksJcRnklrkjDnBuvp9dQ+8
 fU1sOjjYzQPiA6Oa3o/2ruBKj2FymLJ0OzONJb3xPiBO5bJbc1LJwK00tuIRC3hv
 r9Jqoqwae/AolqYephfao/LvUcoyHBaZ6aSbGQYms0Wy2FCkkkocfY2i7QP6S6Mz
 qtOCHxX+yF921AEZ1xTOKgBvBU931WM1MQOe4s1QVllRlLFJhrGqDDwsNlPwRa+6
 OkXmPJSEhsHGFaCdA3iOEy+/W2dvMbVOaGa9csNDpPcSJhhpxc5A4CYRlFSwGyM1
 oL20g1T3ybDP+EkNcdpavWdQ55toWGmm48PunIZImVSdgNRZZQJw107yA/UzQTNz
 kOg27kqtjpM4xcpxmwGlIj4Zoy1M390ACm+n79Awa9agvjOvfV4QE1tLB4tiXyuy
 0Pxy8WWL/G5Si8bKWsfc
 =khZ5
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC driver updates from Olof Johansson:
 "Driver updates for ARM SoCs.  Some for SoC-family code under
  drivers/soc, but also some other driver updates that don't belong
  anywhere else.  We also bring in the drivers/reset code through
  arm-soc.

  Some of the larger updates:

   - Qualcomm support for SMEM, SMSM, SMP2P.  All used to communicate
     with other parts of the chip/board on these platforms, all
     proprietary protocols that don't fit into other subsystems and live
     in drivers/soc for now.

   - System bus driver for UniPhier

   - Driver for the TI Wakeup M3 IPC device

   - Power management for Raspberry PI

  + Again a bunch of other smaller updates and patches"

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (38 commits)
  bus: uniphier: allow only built-in driver
  ARM: bcm2835: clarify RASPBERRYPI_FIRMWARE dependency
  MAINTAINERS: Drop Kumar Gala from QCOM
  bus: uniphier-system-bus: add UniPhier System Bus driver
  ARM: bcm2835: add rpi power domain driver
  dt-bindings: add rpi power domain driver bindings
  ARM: bcm2835: Define two new packets from the latest firmware.
  drivers/soc: make mediatek/mtk-scpsys.c explicitly non-modular
  soc: mediatek: SCPSYS: Add regulator support
  MAINTAINERS: Change QCOM entries
  soc: qcom: smd-rpm: Add existing platform support
  memory/tegra: Add number of TLB lines for Tegra124
  reset: hi6220: fix modular build
  soc: qcom: Introduce WCNSS_CTRL SMD client
  ARM: qcom: select ARM_CPU_SUSPEND for power management
  MAINTAINERS: Add rules for Qualcomm dts files
  soc: qcom: enable smsm/smp2p modular build
  serial: msm_serial: Make config tristate
  soc: qcom: smp2p: Qualcomm Shared Memory Point to Point
  soc: qcom: smsm: Add driver for Qualcomm SMSM
  ...
2016-01-20 18:42:30 -08:00
Olof Johansson
47ec7e0b75 Qualcomm ARM Based SoC Updates for 4.5
* Add WCNSS_CTRL client
 * Various Kconfig changes to fix build issues
 * Update SoC Qualcomm MAINTAINERS entry
 * Add SMP2P, SMSM, and SMEM state machine drivers
 * Add SMD-RPM support for existing platforms
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJWcxOwAAoJEFKiBbHx2RXVCW8P/0WyBFVTOsOiPgm+zM35f4IP
 dmq3sLMIkanVR7QlnZTqJZ0VcuJvUqB254wGOlVDcSQ5wly7CBZRqGH/qD0fRTaO
 pCOPAR50MUWg/pwfQwJKKfJuvGWzuyOCmfg+dBs0nB9dTbnJcYvJ6s7Th12eCPIB
 8//yI/mbAbhml+YQ4Oc2wOd+nfG1DiStxsxrpwd9g9RBgVHTGbyMdrn6ZsOOXvY2
 kQiRebO62KvaoZQY3nGpMSjr0Rxus7o7pAEN0Q1PNEJjc2fKUkWFR00fTBfMIjVh
 l26cdr5MN7xottnDc5Q56xeOW1P85mdBtGdvLqj8r57zJbEX0WFzV4MnuZgclf7j
 RMM58n+CF/mG7YTueCoA5MvAdBkIyhTpflTYQpf5QmLz05ut80KZj4xvvMr5m5WY
 ywKaXfGMLj8w2fXx1uywq8OEtCzkq3uhxk9uULojvGRjfGCSl4FSwUMQhFP7WcfW
 97J0c57o4spVx+ymLopLHfQXj9AuZEdJNFFayno2u3iLoV5RjI1C3Muq3nY8svgp
 mc3DqeImVHS1k/oXGWZeWyro4r3BbnduamH+nwntko91JmxyUZNqhNCMOXIhaI9F
 IR1XKLoIWc9SqK/uh7Lc5mKGUdyy66xaQTfsGPB4quiBrfXDhEkQgEHwEqed6+lO
 jTGAmmfxlKxGRa36By8R
 =gwgF
 -----END PGP SIGNATURE-----

Merge tag 'qcom-soc-for-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/drivers

Qualcomm ARM Based SoC Updates for 4.5

* Add WCNSS_CTRL client
* Various Kconfig changes to fix build issues
* Update SoC Qualcomm MAINTAINERS entry
* Add SMP2P, SMSM, and SMEM state machine drivers
* Add SMD-RPM support for existing platforms

* tag 'qcom-soc-for-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux:
  MAINTAINERS: Change QCOM entries
  soc: qcom: smd-rpm: Add existing platform support
  soc: qcom: Introduce WCNSS_CTRL SMD client
  ARM: qcom: select ARM_CPU_SUSPEND for power management
  MAINTAINERS: Add rules for Qualcomm dts files
  soc: qcom: enable smsm/smp2p modular build
  serial: msm_serial: Make config tristate
  soc: qcom: smp2p: Qualcomm Shared Memory Point to Point
  soc: qcom: smsm: Add driver for Qualcomm SMSM
  soc: qcom: Introduce common SMEM state machine code

Signed-off-by: Olof Johansson <olof@lixom.net>
2015-12-22 12:10:37 -08:00
Uwe Kleine-König
58362d5be3 serial: imx: implement handshaking using gpios with the mctrl_gpio helper
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-12-13 20:01:47 -08:00
Arnd Bergmann
afd7f88f15 serial: 8250: move of_serial code to 8250 directory
As the of-serial driver is now 8250 specific, we can move the
file to a more appropriate place in teh 8250 subdirectory and
adapt the Kconfig help text and file name.

I'm leaving the CONFIG_SERIAL_OF_PLATFORM symbol unchanged
to avoid breaking user configuration files unnecessarily.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-12-13 19:59:48 -08:00
Arnd Bergmann
d1b5c87fa8 serial: remove NWP serial support
The NWP serial driver is no longer needed, as the two users of
this hardware have migrated to a much faster generation hardware,
see https://en.wikipedia.org/wiki/QPACE2 for the replacement.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Krill <ben@codiert.org>
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-12-13 19:59:48 -08:00
Geert Uytterhoeven
29647c4836 serial: SERIAL_MXS_AUART should depend on HAS_DMA
If NO_DMA=y:

    ERROR: "dma_unmap_sg" [drivers/tty/serial/mxs-auart.ko] undefined!
    ERROR: "dma_map_sg" [drivers/tty/serial/mxs-auart.ko] undefined!

Add a dependency on HAS_DMA to fix this.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-12-13 19:59:48 -08:00
Geert Uytterhoeven
f8032cb4f5 serial: SERIAL_IMX_AUART should depend on HAS_DMA
If NO_DMA=y:

    ERROR: "dma_unmap_sg" [drivers/tty/serial/imx.ko] undefined!
    ERROR: "dma_map_sg" [drivers/tty/serial/imx.ko] undefined!

Add a dependency on HAS_DMA to fix this.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-12-13 19:59:48 -08:00
Geert Uytterhoeven
55fe84b17a serial: SERIAL_ATMEL should depend on HAS_DMA
If NO_DMA=y:

    drivers/built-in.o: In function `atmel_release_rx_dma':
    atmel_serial.c:(.text+0x2502e): undefined reference to `dma_unmap_sg'
    drivers/built-in.o: In function `atmel_release_tx_dma':
    atmel_serial.c:(.text+0x25080): undefined reference to `dma_unmap_sg'
    drivers/built-in.o: In function `atmel_tx_dma':
    atmel_serial.c:(.text+0x2517a): undefined reference to `dma_sync_sg_for_cpu'
    drivers/built-in.o: In function `atmel_release_tx_pdc':
    atmel_serial.c:(.text+0x252e6): undefined reference to `dma_unmap_single'
    drivers/built-in.o: In function `atmel_prepare_tx_pdc':
    atmel_serial.c:(.text+0x2531a): undefined reference to `dma_map_single'
    drivers/built-in.o: In function `atmel_release_rx_pdc':
    atmel_serial.c:(.text+0x25362): undefined reference to `dma_unmap_single'
    drivers/built-in.o: In function `atmel_tx_pdc':
    atmel_serial.c:(.text+0x25722): undefined reference to `dma_sync_single_for_cpu'
    drivers/built-in.o: In function `atmel_rx_from_pdc':
    atmel_serial.c:(.text+0x2601a): undefined reference to `dma_sync_single_for_cpu'
    drivers/built-in.o: In function `atmel_rx_from_dma':
    atmel_serial.c:(.text+0x261b2): undefined reference to `dma_sync_sg_for_cpu'
    atmel_serial.c:(.text+0x26264): undefined reference to `dma_sync_sg_for_cpu'
    drivers/built-in.o: In function `atmel_prepare_rx_pdc':
    atmel_serial.c:(.text+0x262de): undefined reference to `dma_unmap_single'
    atmel_serial.c:(.text+0x26308): undefined reference to `dma_map_single'

Add a dependency on HAS_DMA to fix this.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-12-13 19:59:48 -08:00
Stephen Boyd
23a8802466 serial: msm_serial: Make config tristate
This driver works as a module, so mark it as a tristate config
instead of a bool.

Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Reviewed-by: Andy Gross <agross@codeaurora.org>
Signed-off-by: Andy Gross <agross@codeaurora.org>
2015-12-08 13:01:01 -06:00
Peter Hurley
bec8bf61dc serial: fsl_lpuart: Fix earlycon support
Earlycon support for Freescale lpuart should only be enabled when
console support is enabled.

Fixes: 1d59b382f1 ("serial: fsl_lpuart: add earlycon support")
Acked-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-11-20 16:19:54 -08:00
Stefan Agner
1d59b382f1 serial: fsl_lpuart: add earlycon support
Add support for DT and command line based earlycon support for
lpuart and lpuart32 used on Freescale Vybrid and and QorIQ LS1021A
processors.

Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-17 21:18:30 -07:00
Uwe Kleine-König
dc2454f7eb serial: mxs-auart+imx: allow compile testing on non-Freescale architectures
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-04 18:46:43 +01:00
Uwe Kleine-König
c8d1f02245 serial: atmel: allow compile testing on non-atmel architectures
This commit also fixes compiler warnings and errors seen when building
on x86_64.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-04 18:45:18 +01:00
Lucas Stach
913c6c0e94 serial: imx: add earlycon support
Earlycon allows to have an early debugging console that doesn't need
to be statically configured in the kernel config, like earlyprintk,
but is set up through the stdout-path DT property.

This allows to have the early debugging always built into the
kernel and enabled on demand without clashing between different boards
or architectures.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-04 17:49:27 +01:00
Geert Uytterhoeven
565dd11aa7 serial: sh-sci: Switch to generic DMA residue handling
Convert the SCI driver from the SHDMAE-specific partial DMA transfer
handling to the generic dmaengine residual data framework.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-04 17:33:48 +01:00
Greg Kroah-Hartman
062a68a5e0 Revert "uart: pl011: Add support to ZTE ZX296702 uart"
This reverts commit 8cd90e50d1 as with
this patch the serial console is broken on lots of platforms.

Reported-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: Jun Nie <jun.nie@linaro.org>
Acked-by: Will Deacon <will.deacon@arm.com>
Tested-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-04 09:14:20 -07:00
Jun Nie
8cd90e50d1 uart: pl011: Add support to ZTE ZX296702 uart
Support ZTE uart with some registers differing offset.
Probe as platform device for not AMBA IP ID is
available on ZTE uart.

Signed-off-by: Jun Nie <jun.nie@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-04 22:07:26 -07:00
Geert Uytterhoeven
b737eeb09e serial: Allow compile test of GPIO consumers if !GPIOLIB
The GPIO subsystem provides dummy GPIO consumer functions if GPIOLIB is
not enabled. Hence drivers that depend on GPIOLIB, but use GPIO consumer
functionality only, can still be compiled if GPIOLIB is not enabled.

Relax the dependency on GPIOLIB if COMPILE_TEST is enabled, where
appropriate.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-04 22:07:21 -07:00
Niklas Cassel
7b9c5162c1 serial: etraxfs-uart: use mctrl_gpio helpers for handling modem signals
In order to use the mctrl_gpio helpers, we change the DT bindings:
ri-gpios renamed to rng-gpios. cd-gpios renamed to dcd-gpios.
However, no in-tree dts/dtsi specifies these, so no worries.

Signed-off-by: Niklas Cassel <nks@flawful.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-04 22:07:20 -07:00
Greg Kroah-Hartman
92311e46ec Merge 4.2-rc4 into tty-next
Other serial driver work wants to build on patches now in 4.2-rc4 so
merge the branch so this can properly happen.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-07-27 11:12:39 -07:00
Ricardo Ribalda Delgado
1eacbfb06d serial/uartlite: Let it build on any arch with IOMEM
Being a soft core, it can be located not only on PPC or Microblaze
platforms.

Since the driver already does endianness detection we only need to
change the Kconfig to use it in other arches.

This is also done in other softcores as xilinx-spi.

Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-07-23 17:37:53 -07:00
Jakub Kicinski
32aa6339d9 sc16is7xx: fix Kconfig dependencies
When I2C=m and SPI=y or-ing them will produce =y while
what we need is the lower bound, i.e. =m.  Fortunately
SPI is a boolean so we need to handle only one special
case.

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Jakub Kicinski <kubakici@wp.pl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-07-23 15:32:32 -07:00
Linus Torvalds
8c7febe839 TTY/Serial driver patches for 4.2-rc1
Here's the tty and serial driver patches for 4.2-rc1.
 
 A number of individual driver updates, some code cleanups, and other
 minor things, full details in the shortlog.
 
 All have been in linux-next for a while with no reported issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iEYEABECAAYFAlWNoSAACgkQMUfUDdst+ymxNQCguSEmkAYNDdLyYhdcOqSxJt9u
 U1gAoMThUDoomkx6CTDMU1wn53hxgMk9
 =eCUS
 -----END PGP SIGNATURE-----

Merge tag 'tty-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull tty/serial driver updates from Greg KH:
 "Here's the tty and serial driver patches for 4.2-rc1.

  A number of individual driver updates, some code cleanups, and other
  minor things, full details in the shortlog.

  All have been in linux-next for a while with no reported issues"

* tag 'tty-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (152 commits)
  Doc: serial-rs485.txt: update RS485 driver interface
  Doc: tty.txt: remove mention of the BKL
  MAINTAINERS: tty: add serial docs directory
  serial: sprd: check for NULL after calling devm_clk_get
  serial: 8250_pci: Correct uartclk for xr17v35x expansion chips
  serial: 8250_pci: Add support for 12 port Exar boards
  serial: 8250_uniphier: add bindings document for UniPhier UART
  serial: core: cleanup in uart_get_baud_rate()
  serial: stm32-usart: Add STM32 USART Driver
  tty/serial: kill off set_irq_flags usage
  tty: move linux/gsmmux.h to uapi
  doc: dt: add documentation for nxp,lpc1850-uart
  serial: 8250: add LPC18xx/43xx UART driver
  serial: 8250_uniphier: add UniPhier serial driver
  serial: 8250_dw: support ACPI platforms with integrated DMA engine
  serial: of_serial: check the return value of clk_prepare_enable()
  serial: of_serial: use devm_clk_get() instead of clk_get()
  serial: earlycon: Add support for big-endian MMIO accesses
  serial: sirf: use hrtimer for data rx
  serial: sirf: correct the fifo empty_bit
  ...
2015-06-26 15:53:22 -07:00
Yoshinori Sato
e1d0be6161 sh-sci: Add h8300 SCI
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
2015-06-23 13:35:48 +09:00
Maxime Coquelin
48a6092fb4 serial: stm32-usart: Add STM32 USART Driver
This drivers adds support to the STM32 USART controller, which is a
standard serial driver.

Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Reviewed-by: Peter Hurley <peter@hurleysoftware.com>
Reviewed-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-06-10 17:34:26 -07:00
Rama Kiran Kumar Indrakanti
2c837a8a8f sc16is7xx: spi interface is added
spi interface for sc16is7xx is added along with Kconfig flag
to enable spi or i2c, thus in a instance we can have either
spi or i2c or both, in sync to the hw.

Signed-off-by: Rama Kiran Kumar Indrakanti <indrakanti_ram@hotmail.com>
Signed-off-by: Jakub Kicinski <kubakici@wp.pl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-06-01 06:45:27 +09:00
Arnd Bergmann
357d561519 serial: samsung: only use earlycon for console
A configuration that enables earlycon but not the core console
code causes a link error:

  drivers/built-in.o: In function `setup_earlycon':
  drivers/tty/serial/earlycon.c:70: undefined reference to `uart_parse_earlycon'

That error can be triggered by the newly added samsung earlycon support,
which is missing a 'select' statement.

As suggested by Peter Hurley, solves the problem by moving the
'select SERIAL_EARLYCON' statement to the samsung console driver
option, as it is done by all other console drivers.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: b94ba0328d ("serial: samsung: Add support for early console")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-24 13:06:08 -07:00
Stephen Boyd
360ee94b47 TTY: msm_smd_tty: Remove unused driver
This code is no longer used now that mach-msm has been removed.
Delete it.

Cc: David Brown <davidb@codeaurora.org>
Cc: Bryan Huntsman <bryanh@codeaurora.org>
Cc: Daniel Walker <dwalker@fifo99.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-10 19:19:06 +02:00
Geert Uytterhoeven
35a0f950aa serial: SERIAL_IFX6X60 should depend on HAS_DMA
If NO_DMA=y:

    drivers/built-in.o: In function `ifx_spi_free_device':
    ifx6x60.c:(.text+0x96d9a): undefined reference to `dma_free_coherent'
    drivers/built-in.o: In function `ifx_spi_spi_probe':
    ifx6x60.c:(.text+0x978a2): undefined reference to `dma_alloc_coherent'

While DMA is optional in this driver, and is used only if
ifx_modem_platform_data.use_dma is set, there are currently no in-tree
users of ifx_modem_platform_data (and thus of this driver), so just make
it depend on HAS_DMA.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-06 22:27:01 +02:00
Christophe Leroy
49708c9e6c tty: cpm_uart: replace CONFIG_8xx by CONFIG_CPM1
Two config options exist to define powerpc MPC8xx:
* CONFIG_PPC_8xx
* CONFIG_8xx
In addition, CONFIG_PPC_8xx also defines CONFIG_CPM1 as
communication co-processor

arch/powerpc/platforms/Kconfig.cputype has contained the following
comment about CONFIG_8xx item for some years:
"# this is temp to handle compat with arch=ppc"

It looks like not many places still have that old CONFIG_8xx used,
so it is likely to be a good time to get rid of it completely ?

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-26 23:00:36 +01:00
Stephen Boyd
0fea53e255 tty: serial: Remove orphaned serial driver
This driver is orphaned now that mach-msm has been removed.
Delete it.

Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: David Brown <davidb@codeaurora.org>
Cc: Bryan Huntsman <bryanh@codeaurora.org>
Cc: Daniel Walker <dwalker@fifo99.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-26 22:31:09 +01:00
Stephen Boyd
e23407d8b3 tty: serial: msm_serial: Remove dead code
This config no longer exists now that mach-msm has been removed.
Delete it and the associated code.

Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: David Brown <davidb@codeaurora.org>
Cc: Bryan Huntsman <bryanh@codeaurora.org>
Cc: Daniel Walker <dwalker@fifo99.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-26 22:31:09 +01:00
Andy Shevchenko
1bd187de53 x86, intel-mid: remove Intel MID specific serial support
Since we have a native 8250 driver carrying the Intel MID serial devices the
specific support is not needed anymore. This patch removes it for Intel MID.

Note that the console device name is changed from ttyMFDx to ttySx.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-07 03:25:18 +01:00
Joseph Kogut
84e0185efa tty: serial: s/Medfile/Medfield
Fixed misspelling of 'Medfield'

Signed-off-by: Joseph Kogut <joseph.kogut@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-07 03:20:25 +01:00
Kevin Hao
213dce3c17 tty: kconfig: remove the superfluous dependency on PPC_OF
In the current kernel, the CONFIG_PPC_OF is always 'y' for the ppc
arch. So we don't need to check it with other ppc specific options.

Signed-off-by: Kevin Hao <haokexin@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-07 03:13:06 +01:00
Arnd Bergmann
5dcb34bbc3 serial: pl010 is no longer broken
As more ARM platforms are moving into ARCH_MULTIPLATFORM, we can now
have integrator and versatile in the same kernel, and first one selects
this driver, causing a Kconfig warning:

warning: (ARCH_INTEGRATOR_AP) selects SERIAL_AMBA_PL010 which has unmet direct dependencies (TTY && HAS_IOMEM && ARM_AMBA && (BROKEN || !ARCH_VERSATILE))

It turns out that it has not been broken on versatile for a long time,
so we can remove the statement here.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-07 03:08:42 +01:00
Linus Torvalds
b11a278397 Merge branch 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild
Pull kconfig updates from Michal Marek:
 "Yann E Morin was supposed to take over kconfig maintainership, but
  this hasn't happened.  So I'm sending a few kconfig patches that I
  collected:

   - Fix for missing va_end in kconfig
   - merge_config.sh displays used if given too few arguments
   - s/boolean/bool/ in Kconfig files for consistency, with the plan to
     only support bool in the future"

* 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
  kconfig: use va_end to match corresponding va_start
  merge_config.sh: Display usage if given too few arguments
  kconfig: use bool instead of boolean for type definition attributes
2015-02-19 10:36:45 -08:00
Niklas Cassel
692132b5b1 serial: driver for ETRAX FS UART
This is the last missing piece to get a kernel booting to a prompt in qemu-cris.

Signed-off-by: Niklas Cassel <nks@flawful.org>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-02-07 18:43:16 +08:00