Conflicts:
Documentation/networking/ip-sysctl.txt
drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
Both conflicts were simply overlapping context.
A build fix for qlcnic is in here too, simply removing the added
devinit annotations which no longer exist.
Signed-off-by: David S. Miller <davem@davemloft.net>
Beginning with kernel 3.8, the DMA mapping routines issue a warning
for the first call to pci_map_single() that is not checked with a
pci_dma_mapping_error() call.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use strlcpy where possible to ensure the string is \0 terminated.
Use always sizeof(string) instead of 32, ETHTOOL_BUSINFO_LEN
and custom defines.
Use snprintf instead of sprint.
Remove unnecessary inits of ->fw_version
Remove unnecessary inits of drvinfo struct.
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
CONFIG_HOTPLUG is going away as an option so __devexit is no
longer needed.
Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
CONFIG_HOTPLUG is going away as an option so __devinitdata is no
longer needed.
Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
CONFIG_HOTPLUG is going away as an option so __devinit is no longer
needed.
Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
CONFIG_HOTPLUG is going away as an option so __devexit_p is no longer
needed.
Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Inspect the return value of register_netdev() in the driver probe routine and
return -ENODEV in case of error.
Signed-off-by: Kumar Amit Mehta <gmate.amit@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When compiling this driver I get these compile warnings:
rtllib.h:2573:2: warning: '______f' is static but declared in inline
function 'rtllib_is_empty_essid' which is not static [enabled by
default]
rtllib.h:2579:3: warning: '______f' is static but declared in inline
function 'rtllib_is_empty_essid' which is not static [enabled by
default]
rtllib.h:2594:2: warning: '______f' is static but declared in inline
function 'rtllib_is_valid_mode' which is not static [enabled by default]
rtllib.h:2599:2: warning: '______f' is static but declared in inline
function 'rtllib_is_valid_mode' which is not static [enabled by default]
rtllib.h:2604:2: warning: '______f' is static but declared in inline
function 'rtllib_is_valid_mode' which is not static [enabled by default]
rtllib.h:2618:3: warning: '______f' is static but declared in inline
function 'rtllib_get_hdrlen' which is not static [enabled by default]
rtllib.h:2620:3: warning: '______f' is static but declared in inline
function 'rtllib_get_hdrlen' which is not static [enabled by default]
These functions are declared as extern inline but not 'overloaded'
anywhere so we can declare them static inline and get rid of the
warnings.
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Here is the big staging tree update for the 3.7-rc1 merge window.
There are a few patches in here that are outside of the staging area,
namely HID and IIO patches, but all of them have been acked by the
relevant subsystem maintainers. The IIO stuff is still coming in
through this tree as it hasn't entirely moved out of the staging tree,
but is almost there.
Other than that, there wa a ton of work on the comedi drivers to make
them more readable and the correct style. Doing that removed a lot of
code, but we added a new driver to the staging tree, so we didn't end up
with a net reduction this time around:
662 files changed, 51649 insertions(+), 26582 deletions(-)
All of these patches have been in the linux-next tree already.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)
iEYEABECAAYFAlBp32YACgkQMUfUDdst+ymU5QCgm8KWB+dAO8ZFbmzhhm3C0VFl
wB0AoKbDj/tCiUHkJ70u/i3OHueKkpet
=ut2/
-----END PGP SIGNATURE-----
Merge tag 'staging-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging tree update from Greg Kroah-Hartman:
"Here is the big staging tree update for the 3.7-rc1 merge window.
There are a few patches in here that are outside of the staging area,
namely HID and IIO patches, but all of them have been acked by the
relevant subsystem maintainers. The IIO stuff is still coming in
through this tree as it hasn't entirely moved out of the staging tree,
but is almost there.
Other than that, there wa a ton of work on the comedi drivers to make
them more readable and the correct style. Doing that removed a lot of
code, but we added a new driver to the staging tree, so we didn't end
up with a net reduction this time around:
662 files changed, 51649 insertions(+), 26582 deletions(-)
All of these patches have been in the linux-next tree already.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"
* tag 'staging-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (1094 commits)
staging: comedi: jr3_pci: fix iomem dereference
staging: comedi: drivers: use comedi_fc.h cmdtest helpers
Staging: winbond: usb_free_urb(NULL) is safe
Staging: winbond: checkpatch cleanup
Staging: winbond: Removed undesired spaces, lines and tabs
Staging: winbond: Typo corrections in comments
Staging: winbond: Changed c99 comments to c89 comments
staging: r8712u: Do not queue cloned skb
staging: comedi: ni_mio_common: always lock in ni_ai_poll()
staging: comedi: s626: add FIXME comment
staging: comedi: s626: don't dereference insn->data
staging: comedi: s526: fix if() check in s526_gpct_winsn()
staging: comedi: s626: cleanup comments in s626_initialize()
staging: comedi: s626: remove clear of kzalloc'ed data
staging: comedi: s626: remove 'WDInterval' from private data
staging: comedi: s626: remove 'ChargeEnabled' from private data
staging: comedi: s626: remove 'IsBoardRevA' comment
staging: comedi: s626: #if 0 out the "SAA7146 BUG WORKAROUND"
staging: comedi: s626: remove 'allocatedBuf' from private data
staging: comedi: s626: add final attach message
...
"Whether" is spelled "wether" in several places. This fixes those that
are in the staging tree.
Signed-off-by: Adam Buchbinder <adam.buchbinder@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Using random_ether_addr() to generate a random Ethernet
address (MAC) that is not multicast and has the local
assigned bit set. Not need to duplicating its implementation.
spatch with a semantic match is used to found this problem.
(http://coccinelle.lip6.fr/)
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
as per Documentation/CodingStyle we dont need to cast the return of
kmalloc
Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Using is_zero_ether_addr() instead of directly use
memcmp() to determine if the ethernet address is all
zeros.
spatch with a semantic match is used to found this problem.
(http://coccinelle.lip6.fr/)
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Using is_broadcast_ether_addr() instead of directly use
memcmp() to determine if the ethernet address is broadcast
address.
spatch with a semantic match is used to found this problem.
(http://coccinelle.lip6.fr/)
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The original code is equivalent to:
wrqu->retry.flags = 0x1000 & 0x0002;
so it just sets .flags to zero. We should be ORing the values together
like r8192_wx_get_retry() does in drivers/staging/rtl8192u/r8192U_wx.c.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A broadcast packet is a multicast packet, no need to test twice.
Reorder one defective test in rtl_core of is_multi_ether_addr
before is_broadcast_ether_addr as the is_multi returns true for
broadcast frames.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As mentioned by jesper juhl, we should probably change ContiuneDiffCount
to ContinueDiffCount. Below you will find the changes to do so. I have
compile tested this and everything builds with the changes, as for
testing on the hardware I am unable to do.
Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Routine rtllib_MlmeDisassociateRequest() has a comparison of memcpy()
with NULL, which makes no sense. Analysis of the code suggests that
memcmp() was intended.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It is possible to misconfigure a kernel by selecting the rtllib crypto
routines without enabling the underlying support from the crypto library.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Acked-by: Sean MacLennan <seanm@seanm.ca>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We don't use the rxcmdpkt[] counters at all and we can remove them.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
ACKed-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In drivers/staging/rtl8192e/rtl8192e/rtl_core.c the follwing printk-message can be found:
printk(KERN_ERR "rtl8193e: Unable to allocate space "
This is quite obviously just a typo, all other similar messages use
"rtl8192e" and the string "rtl8193e" does not occur anywhere else in the
source of the driver.
Signed-off-by: Axel Koellhofer <AxelKoellhofer@web.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In drivers/staging/rtl8192e/rtllib_softmac.c::rtllib_rx_assoc_resp()
we allocate memory for 'network' with kzalloc() and then proceed to
zero the already zeroed mem we got from kzalloc() with
memset(). That's redundant, so remove the memset()
We also fail to kfree() the memory we allocated for 'network' if we do not enter
if (ieee->current_network.qos_data.supported == 1) {
and the variable then goes out of scope.
To fix that I simply moved the kfree() that was inside that 'if'
statement to instead be just after it. It then covers both the case
where we take the branch and when we don't.
Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rewrite a duplicated test to test the correct value
The semantic match that finds this problem is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@@
expression E;
@@
(
* E
|| ... || E
|
* E
&& ... && E
)
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Convert rtllib from registering the crypt drivers against rtllib_crypt
and instead register the against lib80211. The crypto functions have
R- prepended (R-CCMP, R-TKIP, R-WEP) so they will not clash with the
lib80211 versions.
We cannot use the lib80211 crypt drivers since the rtl8192e has some
hardware support that is not handled by the lib80211 crypt drivers.
Signed-off-by: Sean MacLennan <seanm@seanm.ca>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Convert rtllib_crypt_data to lib80211_crypt_data and
rtllib_crypt_ops to lib80211_crypt_ops.
This is almost a 1:1 replacement, only extra_prefix_len and
extra_postfix_len changed.
Signed-off-by: Sean MacLennan <seanm@seanm.ca>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Add lib80211.h header file to rtllib.h and get it compiling.
Signed-off-by: Sean MacLennan <seanm@seanm.ca>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The rtllib and rtllib_crypt drivers are both required for a fully
functional rtllib. Make sure both are always available by having
rtllib select rtllib_crypt.
Reported-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Sean MacLennan <seanm@seanm.ca>
Acked-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The "rtl8192e: Export symbols" patch exported three functions already
exported by the rtl8192u driver. This patch renames the three functions:
Dot11d_Init => dot11d_init
HTUpdateSelfAndPeerSetting => HT_update_self_and_peer_setting
IsLegalChannel => rtllib_legal_channel
Signed-off-by: Sean MacLennan <seanm@seanm.ca>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Now that the rtl8192e driver is split up, it makes sense to keep the
rtllib code in one directory and the rtl8192e specific code in
another. This patch contains the split and the fixup of includes.
Since rtl_core.h already included rtllib.h and dot11d.h, rtl_core.h
was updated to point to the parent directory. All other references to
rtllib.h and dot11d.h in the rtl8192e specific code where deleted
rather than fixed. This leaves just one file that needs to know the
real location of the rtllib includes.
Signed-off-by: Sean MacLennan <seanm@seanm.ca>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch splits the current r8192e_pci driver up into six different
drivers: rtllib, rtllib_crypt, rtllib_crypt_ccmp, rtllib_crypt_tkip,
rtllib_crypt_wep, and r8192e_pci.
Now that they are proper modules, the init and exit functions do not
need to be called directly. Also, the rtllib_*_null functions are not
needed since they will be loaded on demand.
Signed-off-by: Sean MacLennan <seanm@seanm.ca>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The rtl8192e driver had a natural split between the more generic
rtllib code and the more specific rtl8192e code. This patch exports
all the symbols needed by the r8192 specific code from the rtllib
generic code.
Signed-off-by: Sean MacLennan <seanm@seanm.ca>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Rename rtl_debug.h to rtllib_debug.h. Source files should include
rtllib.h if they are generic and rtl_core.h if they are r8192e
specific. Files should never include both.
Signed-off-by: Sean MacLennan <seanm@seanm.ca>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The RTL_DEBUG enum is used for rt_global_debug_component global
variable and RT_TRACE. It should be in rtl_debug.h and not rtl_core.h.
The rtl8192_proc_* functions are r8192 specific and should not be in
rtl_debug.h. Move them to rtl_core.h.
Signed-off-by: Sean MacLennan <seanm@seanm.ca>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch cleans up rtl_debug.h by removing all the unused defines and
stub functions.
The changes to rtl_core.c are just to remove the deleted stub function
calls.
The changes to rtl_debug.c are functions that are never called.
Signed-off-by: Sean MacLennan <seanm@seanm.ca>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Use kmemdup rather than duplicating its implementation
The semantic patch that makes this change is available
in scripts/coccinelle/api/memdup.cocci.
More information about semantic patching is available at
http://coccinelle.lip6.fr/
Signed-off-by: Thomas Meyer <thomas@m3y3r.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Use kmemdup rather than duplicating its implementation
The semantic patch that makes this change is available
in scripts/coccinelle/api/memdup.cocci.
More information about semantic patching is available at
http://coccinelle.lip6.fr/
Signed-off-by: Thomas Meyer <thomas@m3y3r.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Use kzalloc rather than kmalloc followed by memset with 0
This considers some simple cases that are common and easy to validate
Note in particular that there are no ...s in the rule, so all of the
matched code has to be contiguous
The semantic patch that makes this change is available
in scripts/coccinelle/api/alloc/kzalloc-simple.cocci.
Signed-off-by: Thomas Meyer <thomas@m3y3r.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
It has always been enabled unconditionally by ccflags-y.
Signed-off-by: Stefan Lippers-Hollmann <s.l-h@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
