Commit Graph

57 Commits

Author SHA1 Message Date
Linus Torvalds
670ffccb2f SCSI misc on 20171114
This is mostly updates of the usual suspects: lpfc, qla2xxx, hisi_sas,
 megaraid_sas, pm80xx, mpt3sas, be2iscsi, hpsa. and a host of minor
 updates.
 
 There's no major behaviour change or additions to the core in all of
 this, so the potential for regressions should be small (biggest
 potential being in the scsi error handler changes).
 
 Signed-off-by: James E.J. Bottomley <jejb@linux.vnet.ibm.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABAgAGBQJaCxtCAAoJEAVr7HOZEZN4d9EQAI+OHP6ss6zjKKC21c9jNPcH
 NhLrNv37gHg/LA2VXeUEL9RGUjCGLIUrI4HsrxzkFAMLKP4TkshMs8/2RvczY+Sa
 VpayPqVybEKLIS6ipQyM1SLIQff2nvtDVcN/T+8z1lkk45TrbA6ZGuwUwd2aJyEA
 2V2wtg51ObnL0Nr9QPPll0JrtL1AnCZyRlu9XrwTZuuSBZwk93opIuuvbZm/3dVg
 Ir4GSS4Y+PuHIfu4cxqdsPMdzRdY9I2me1YiE4jeFSn1/VTAjL4HBz7fO9eITT42
 VhXSpDz1XvFsa9dJ0ubkqoALpJzCfOcBw+EuGvSydLEvOBoEVwMccdfaD9lT1zc5
 L9e1Z5qqJoq7hTA6xTXCYfWG73I9HYvljtmc8yudKHhADOdnSTUXhaO6uBF0RNqD
 OxPSA1RZwRx3c6lDOcK6BTtvLAkTEuYKdrWSKJi0w+QXJAyQ6etqbmsKpmPdRim7
 Z4ZSpJFro2gyo9gcdJO0ykTG+z3U7Z/ay1sNgnuprsv+eU/QjUdlAPl18o79EkRf
 H54zZggZ4wC6q/cFVVt4Vx+V+oqIeu38s7NDXS9UltLoTZPm2EzDW6pXd/38Z4Tf
 a1oBAUET8kYLC90P8sVZxUIHZjITlpgDbyE2Lq00PMYXhk8S4IxF0aMN5RvVqzUv
 +7N2HrHkSSgG1nhw1t+E
 =3O85
 -----END PGP SIGNATURE-----

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI updates from James Bottomley:
 "This is mostly updates of the usual suspects: lpfc, qla2xxx, hisi_sas,
  megaraid_sas, pm80xx, mpt3sas, be2iscsi, hpsa. and a host of minor
  updates.

  There's no major behaviour change or additions to the core in all of
  this, so the potential for regressions should be small (biggest
  potential being in the scsi error handler changes)"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (203 commits)
  scsi: lpfc: Fix hard lock up NMI in els timeout handling.
  scsi: mpt3sas: remove a stray KERN_INFO
  scsi: mpt3sas: cleanup _scsih_pcie_enumeration_event()
  scsi: aacraid: use timespec64 instead of timeval
  scsi: scsi_transport_fc: add 64GBIT and 128GBIT port speed definitions
  scsi: qla2xxx: Suppress a kernel complaint in qla_init_base_qpair()
  scsi: mpt3sas: fix dma_addr_t casts
  scsi: be2iscsi: Use kasprintf
  scsi: storvsc: Avoid excessive host scan on controller change
  scsi: lpfc: fix kzalloc-simple.cocci warnings
  scsi: mpt3sas: Update mpt3sas driver version.
  scsi: mpt3sas: Fix sparse warnings
  scsi: mpt3sas: Fix nvme drives checking for tlr.
  scsi: mpt3sas: NVMe drive support for BTDHMAPPING ioctl command and log info
  scsi: mpt3sas: Add-Task-management-debug-info-for-NVMe-drives.
  scsi: mpt3sas: scan and add nvme device after controller reset
  scsi: mpt3sas: Set NVMe device queue depth as 128
  scsi: mpt3sas: Handle NVMe PCIe device related events generated from firmware.
  scsi: mpt3sas: API's to remove nvme drive from sml
  scsi: mpt3sas: API 's to support NVMe drive addition to SML
  ...
2017-11-14 16:23:44 -08:00
Kees Cook
abef751056 scsi: bnx2i: Convert timers to use timer_setup()
In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.

There was a seemingly missing call to initialize the timer in one handler,
so this was added to remove the open-coded initialization.

Cc: QLogic-Storage-Upstream@qlogic.com
Cc: "James E.J. Bottomley" <jejb@linux.vnet.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: linux-scsi@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-10-27 02:22:00 -07:00
Christos Gkekas
cd6372b614 scsi: bnx2i: Clean up unused pointers in bnx2i_hwi
Pointers bnx2i_cmd are set but never used, so they can be removed.

Signed-off-by: Christos Gkekas <chris.gekas@gmail.com>
Acked-by: Manish Rangankar <Manish.Rangankar@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-09-15 15:40:29 -04:00
Colin Ian King
09d2a4e7fc bnx2i: fix spelling mistake "complection" -> "completion"
Trivial fix to spelling mistake in printk message.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Laurence Oberman <loberman@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-07-12 23:16:31 -04:00
Vikas Chaudhary
f39a775715 bnx2i: Rebranding bnx2i driver
QLogic has acquired the NetXtremeII products and drivers from Broadcom.
This patch re-brands bnx2i driver as a QLogic driver

Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Acked-by: Eddie Wai <eddie.wai@broadcom.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-25 17:16:59 -04:00
Dongsheng Yang
8698a745d8 sched, treewide: Replace hardcoded nice values with MIN_NICE/MAX_NICE
Replace various -20/+19 hardcoded nice values with MIN_NICE/MAX_NICE.

Signed-off-by: Dongsheng Yang <yangds.fnst@cn.fujitsu.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/ff13819fd09b7a5dba5ab5ae797f2e7019bdfa17.1394532288.git.yangds.fnst@cn.fujitsu.com
Cc: devel@driverdev.osuosl.org
Cc: devicetree@vger.kernel.org
Cc: fcoe-devel@open-fcoe.org
Cc: linux390@de.ibm.com
Cc: linux-kernel@vger.kernel.org
Cc: linux-mm@kvack.org
Cc: linux-s390@vger.kernel.org
Cc: linux-scsi@vger.kernel.org
Cc: nbd-general@lists.sourceforge.net
Cc: ocfs2-devel@oss.oracle.com
Cc: openipmi-developer@lists.sourceforge.net
Cc: qla2xxx-upstream@qlogic.com
Cc: linux-arch@vger.kernel.org
[ Consolidated the patches, twiddled the changelog. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-18 12:07:24 +02:00
Linus Torvalds
1a0b6abaea SCSI misc on 20140401
This patch consists of the usual driver updates (megaraid_sas, scsi_debug,
 qla2xxx, qla4xxx, lpfc, bnx2fc, be2iscsi, hpsa, ipr) plus an assortment of
 minor fixes and the first precursors of SCSI-MQ (the code path
 simplifications) and the bug fix for the USB oops on remove (which involves an
 infrastructure change, so is sent via the main tree with a delayed backport
 after a cycle in which it is shown to introduce no new bugs).
 
 Signed-off-by: James Bottomley <JBottomley@Parallels.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQEcBAABAgAGBQJTOsP1AAoJEDeqqVYsXL0MraUIAMCHWIN791cSc/E4d6mw/6nC
 j5CG/wwuw3VfqJcJJ8PcItfReWPuS7aLwhAx3wNGDUe7Vcz9pmcgJU9c2/ZWhIJH
 D0YXnGSkkfxI9Wc5WJ/NbueS0TFt0G5B6wpIxSLpSEJ1k9I90vxe3symCwv5vS/p
 3Cd2nZZCLg6ArzZJ3PJLnNG9FUp2ZBeZwfPu4CuPm+3kEq9oRATg7bS4NNtVTQLP
 0zNs5rKAVWfnE5Ii8VFjA7DLduG9W1IBNnSI7EERenrLKMbHG5530Rnl71uvjjgY
 0jmQ5YGpTsYcJggLdaijZdK+zuq6Jtc+0DwWJKIE3cEHx3kUrYi4UQWTTRk9ttQ=
 =Bp1Y
 -----END PGP SIGNATURE-----

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull first round of SCSI updates from James Bottomley:
 "This patch consists of the usual driver updates (megaraid_sas,
  scsi_debug, qla2xxx, qla4xxx, lpfc, bnx2fc, be2iscsi, hpsa, ipr) plus
  an assortment of minor fixes and the first precursors of SCSI-MQ (the
  code path simplifications) and the bug fix for the USB oops on remove
  (which involves an infrastructure change, so is sent via the main tree
  with a delayed backport after a cycle in which it is shown to
  introduce no new bugs)"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (196 commits)
  [SCSI] sd: Quiesce mode sense error messages
  [SCSI] add support for per-host cmd pools
  [SCSI] simplify command allocation and freeing a bit
  [SCSI] megaraid: simplify internal command handling
  [SCSI] ses: Use vpd information from scsi_device
  [SCSI] Add EVPD page 0x83 and 0x80 to sysfs
  [SCSI] Return VPD page length in scsi_vpd_inquiry()
  [SCSI] scsi_sysfs: Implement 'is_visible' callback
  [SCSI] hpsa: update driver version to 3.4.4-1
  [SCSI] hpsa: fix bad endif placement in RAID 5 mapper code
  [SCSI] qla2xxx: Fix build errors related to invalid print fields on some architectures.
  [SCSI] bfa: Replace large udelay() with mdelay()
  [SCSI] vmw_pvscsi: Some improvements in pvscsi driver.
  [SCSI] vmw_pvscsi: Add support for I/O requests coalescing.
  [SCSI] vmw_pvscsi: Fix pvscsi_abort() function.
  [SCSI] remove deprecated IRQF_DISABLED from SCSI
  [SCSI] bfa: Updating Maintainers email ids
  [SCSI] ipr: Add new CCIN definition for Grand Canyon support
  [SCSI] ipr: Format HCAM overlay ID 0x21
  [SCSI] ipr: Use pci_enable_msi_range() and pci_enable_msix_range()
  ...
2014-04-01 18:49:04 -07:00
Michael Chan
be1fefc214 cnic,bnx2i,bnx2fc: Fix inconsistent use of page size
The bnx2/bnx2x rings are made up of linked pages.  However there is an
upper limit on the page size as some the page size settings are 16-bit
in the hardware/firmware interface.  In the current code, some parts
use BNX2_PAGE_SIZE which has a 16K upper limit and some parts use
PAGE_SIZE.  On archs with >= 64K PAGE_SIZE, it generates some compile
warnings.  Define a new CNIC_PAGE_SZIE which has an upper limit of
16K and use it consistently in all relevant parts.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: Eddie Wai <eddie.wai@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-18 16:02:16 -04:00
Shlomo Pongratz
659743b02c [SCSI] libiscsi: Reduce locking contention in fast path
Replace the session lock with two locks, a forward lock and
a backwards lock named frwd_lock and back_lock respectively.

The forward lock protects resources that change while sending a
request to the target, such as cmdsn, queued_cmdsn, and allocating
task from the commands' pool with kfifo_out.

The backward lock protects resources that change while processing
a response or in error path, such as cmdsn_exp, cmdsn_max, and
returning tasks to the commands' pool with kfifo_in.

Under a steady state fast-path situation, that is when one
or more processes/threads submit IO to an iscsi device and
a single kernel upcall (e.g softirq) is dealing with processing
of responses without errors, this patch eliminates the contention
between the queuecommand()/request response/scsi_done() flows
associated with iscsi sessions.

Between the forward and the backward locks exists a strict locking
hierarchy. The mutual exclusion zone protected by the forward lock can
enclose the mutual exclusion zone protected by the backward lock but not
vice versa.

For example, in iscsi_conn_teardown or in iscsi_xmit_data when there is
a failure and __iscsi_put_task is called, the backward lock is taken while
the forward lock is still taken. On the other hand, if in the RX path a nop
is to be sent, for example in iscsi_handle_reject or __iscsi_complete_pdu
than the forward lock is released and the backward lock is taken for the
duration of iscsi_send_nopout, later the backward lock is released and the
forward lock is retaken.

libiscsi_tcp uses two kernel fifos the r2t pool and the r2t queue.

The insertion and deletion from these queues didn't corespond to the
assumption taken by the new forward/backwards session locking paradigm.

That is, in iscsi_tcp_clenup_task which belongs to the RX (backwards)
path, r2t is taken out from r2t queue and inserted to the r2t pool.
In iscsi_tcp_get_curr_r2t which belong to the TX (forward) path, r2t
is also inserted to the r2t pool and another r2t is pulled from r2t
queue.

Only in iscsi_tcp_r2t_rsp which is called in the RX path but can requeue
to the TX path, r2t is taken from the r2t pool and inserted to the r2t
queue.

In order to cope with this situation, two spin locks were added,
pool2queue and queue2pool. The former protects extracting from the
r2t pool and inserting to the r2t queue, and the later protects the
extracing from the r2t queue and inserting to the r2t pool.

Signed-off-by: Shlomo Pongratz <shlomop@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
[minor fix up to apply cleanly and compile fix]
Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-03-15 10:19:18 -07:00
Linus Torvalds
9073e1a804 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
Pull trivial tree updates from Jiri Kosina:
 "Usual earth-shaking, news-breaking, rocket science pile from
  trivial.git"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (23 commits)
  doc: usb: Fix typo in Documentation/usb/gadget_configs.txt
  doc: add missing files to timers/00-INDEX
  timekeeping: Fix some trivial typos in comments
  mm: Fix some trivial typos in comments
  irq: Fix some trivial typos in comments
  NUMA: fix typos in Kconfig help text
  mm: update 00-INDEX
  doc: Documentation/DMA-attributes.txt fix typo
  DRM: comment: `halve' -> `half'
  Docs: Kconfig: `devlopers' -> `developers'
  doc: typo on word accounting in kprobes.c in mutliple architectures
  treewide: fix "usefull" typo
  treewide: fix "distingush" typo
  mm/Kconfig: Grammar s/an/a/
  kexec: Typo s/the/then/
  Documentation/kvm: Update cpuid documentation for steal time and pv eoi
  treewide: Fix common typo in "identify"
  __page_to_pfn: Fix typo in comment
  Correct some typos for word frequency
  clk: fixed-factor: Fix a trivial typo
  ...
2013-11-15 16:47:22 -08:00
Maxime Jayat
3f79410c7c treewide: Fix common typo in "identify"
Correct common misspelling of "identify" as "indentify" throughout
the kernel

Signed-off-by: Maxime Jayat <maxime@artisandeveloppeur.fr>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-10-14 15:31:06 +02:00
Michael Chan
f78afb3563 bnx2x, cnic, bnx2i, bnx2fc: Fix bnx2i and bnx2fc regressions.
commit b9871bcfd2
    bnx2x: VF RSS support - PF side

changed the configuration of the doorbell HW and it broke iSCSI and FCoE.
We fix this by making compatible changes to the doorbell address in bnx2i
and bnx2fc.  For the userspace driver, we need to pass a modified CID
so that the existing userspace driver will calculate the correct doorbell
address and continue to work.

Signed-off-by: Ariel Elior <ariele@broadcom.com>
Signed-off-by: Eddie Wai <eddie.wai@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-18 12:24:32 -04:00
Eddie Wai
0b3bf38739 [SCSI] bnx2i: Update version and copyright year 2013
Old version: 2.7.2.2
New version: 2.7.6.2

Signed-off-by: Eddie Wai <eddie.wai@broadcom.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-08-23 13:04:29 -04:00
Tomas Henzl
d4a0d607e2 [SCSI] bnx2i: fix the bit manipulation when setting the error mask
The intention in bnx2i_send_fw_iscsi_init_msg was to zero out
only the lower 32bits, but instead the whole mask64 is zeroed.
This patch fixes it.

Signed-off-by: Tomas Henzl <thenzl@redhat.com>
Acked-by: Eddie Wai <eddie.wai@broadcom.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-01-29 14:15:34 +11:00
Eddie Wai
d653220711 [SCSI] bnx2i: Fixed NULL ptr deference for 1G bnx2 Linux iSCSI offload
This patch fixes the following kernel panic invoked by uninitialized fields
in the chip initialization for the 1G bnx2 iSCSI offload.

One of the bits in the chip initialization is being used by the latest
firmware to control overflow packets.  When this control bit gets enabled
erroneously, it would ultimately result in a bad packet placement which would
cause the bnx2 driver to dereference a NULL ptr in the placement handler.

This can happen under certain stress I/O environment under the Linux
iSCSI offload operation.

This change only affects Broadcom's 5709 chipset.

Unable to handle kernel NULL pointer dereference at 0000000000000008 RIP:
 [<ffffffff881f0e7d>] :bnx2:bnx2_poll_work+0xd0d/0x13c5
Pid: 0, comm: swapper Tainted: G     ---- 2.6.18-333.el5debug #2
RIP: 0010:[<ffffffff881f0e7d>]  [<ffffffff881f0e7d>] :bnx2:bnx2_poll_work+0xd0d/0x13c5
RSP: 0018:ffff8101b575bd50  EFLAGS: 00010216
RAX: 0000000000000005 RBX: ffff81007c5fb180 RCX: 0000000000000000
RDX: 0000000000000ffc RSI: 00000000817e8000 RDI: 0000000000000220
RBP: ffff81015bbd7ec0 R08: ffff8100817e9000 R09: 0000000000000000
R10: ffff81007c5fb180 R11: 00000000000000c8 R12: 000000007a25a010
R13: 0000000000000000 R14: 0000000000000005 R15: ffff810159f80558
FS:  0000000000000000(0000) GS:ffff8101afebc240(0000) knlGS:0000000000000000
CS:  0010 DS: 0018 ES: 0018 CR0: 000000008005003b
CR2: 0000000000000008 CR3: 0000000000201000 CR4: 00000000000006a0
Process swapper (pid: 0, threadinfo ffff8101b5754000, task ffff8101afebd820)
Stack:  000000000000000b ffff810159f80000 0000000000000040 ffff810159f80520
 ffff810159f80500 00cf00cf8008e84b ffffc200100939e0 ffff810009035b20
 0000502900000000 000000be00000001 ffff8100817e7810 00d08101b575bea8
Call Trace:
 <IRQ>  [<ffffffff8008e0d0>] show_schedstat+0x1c2/0x25b
 [<ffffffff881f1886>] :bnx2:bnx2_poll+0xf6/0x231
 [<ffffffff8000c9b9>] net_rx_action+0xac/0x1b1
 [<ffffffff800125a0>] __do_softirq+0x89/0x133
 [<ffffffff8005e30c>] call_softirq+0x1c/0x28
 [<ffffffff8006d5de>] do_softirq+0x2c/0x7d
 [<ffffffff8006d46e>] do_IRQ+0xee/0xf7
 [<ffffffff8005d625>] ret_from_intr+0x0/0xa
 <EOI>  [<ffffffff801a5780>] acpi_processor_idle_simple+0x1c5/0x341
 [<ffffffff801a573d>] acpi_processor_idle_simple+0x182/0x341
 [<ffffffff801a55bb>] acpi_processor_idle_simple+0x0/0x341
 [<ffffffff80049560>] cpu_idle+0x95/0xb8
 [<ffffffff80078b1c>] start_secondary+0x479/0x488

Signed-off-by: Eddie Wai <eddie.wai@broadcom.com>
Cc: stable@vger.kernel.org
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-09-17 13:40:32 +01:00
David S. Miller
abaa72d7fd Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflicts:
	drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
2012-07-19 11:17:30 -07:00
Eddie Wai
a771718065 [SCSI] bnx2i: Removed the reference to the netdev->base_addr
The netdev->base_addr parameter has been deprecated in the L2 bnx2
driver.  This is used by bnx2i for the BARn iomapping.

This patch will directly reference the pci_resource_start instead
of using the deprecated netdev->base_addr.

This patch is actually a critical bug fix as the 1G bnx2 driver no
longer supports the netdev->base_addr in the current kernel of the scsi
tree.  This means that Broadcom's 1G Linux iSCSI offload solution would
not work at all without this patch. 

Signed-off-by: Eddie Wai <eddie.wai@broadcom.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-07-08 09:52:03 +01:00
Barak Witkowski
2e499d3cc1 bnx2x, bnx2fc, bnx2i, cnic: Add statistics support and FCoE capabilities advertisement
1. When FCoE offload driver is registered, copy its capabilities to the chip
   scratchpad.
2. Copy FCoE/iSCSI MAC addresses in aligned manner to chip scratchpad.
3. Add FCoE/iSCSI statistics collection support

Signed-off-by: Barak Witkowski <barak@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: Eddie Wai <eddie.wai@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-27 01:20:13 -07:00
Eddie Wai
9ebd99c599 [SCSI] bnx2i: Updated version and copyright year
Old version: 2.7.0.3
New version: 2.7.2.2

Signed-off-by: Eddie Wai <eddie.wai@broadcom.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-10 09:04:18 +01:00
Eddie Wai
70fc872c73 [SCSI] bnx2i: Fixed the override of the error_mask module param
The error_mask module param overrides has a bug which prevented
the new module param values to take effect.

Also changed the type attribute of the error_mask1/2 module params
from int to uint to allow the MSB to be set.

Signed-off-by: Eddie Wai <eddie.wai@broadcom.com>
Acked-by: Anil Veerabhadrappa <anilgv@broadcom.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-19 08:09:01 -06:00
Eddie Wai
a878185c3b [SCSI] bnx2i: Fixed kernel panic caused by unprotected task->sc->request deref
During session recovery, the conn_stop call will trigger a flush
to all outstanding SCSI cmds in the xmit queue.  This will set
all outstanding task->sc to NULL prior to the session_teardown
call which frees the task memory.

In the bnx2i SCSI response processing path, only the task was being checked
for NULL under the session lock before the task->sc->request dereferencing.
If there are outstanding SCSI cmd responses pending for process, the
following kernel panic can be exposed where task->sc was found to be NULL.

 Call Trace:
[   69.720205]  [<ffffffffa040d0d0>] bnx2i_process_new_cqes+0x290/0x3c0 [bnx2i]
[   69.804289]  [<ffffffffa040d233>] bnx2i_fastpath_notification+0x33/0xa0 [bnx2
i]
[   69.891490]  [<ffffffffa040d37b>] bnx2i_indicate_kcqe+0xdb/0x330 [bnx2i]
[   69.971427]  [<ffffffffa03eac5e>] service_kcqes+0x16e/0x1d0 [cnic]
[   70.045132]  [<ffffffffa03eacea>] cnic_service_bnx2x_kcq+0x2a/0x50 [cnic]
[   70.126105]  [<ffffffffa03ead53>] cnic_service_bnx2x_bh+0x43/0x140 [cnic]
[   70.207081]  [<ffffffff81060676>] tasklet_action+0x66/0x110
[   70.273521]  [<ffffffff8106025f>] __do_softirq+0xef/0x220
[   70.337887]  [<ffffffff81447ebc>] call_softirq+0x1c/0x30

This patch adds the !task->sc check and also protects the sc dereferencing
under the session lock.

Signed-off-by: Eddie Wai <eddie.wai@broadcom.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-12-14 17:05:23 +04:00
Eddie Wai
610602f369 [SCSI] bnx2i: Fixed the endian on TTT for NOP out transmission
The iscsi_nopout task's TTT is defined as __be32 while the DMA
memory to the chip is CPU specific.  This creates a problem for
unsolicited NOP-In responses where the TTT is not the RESERVED
tag of 0xFFs.  This patch adds a call to be32_to_cpu for the TTT
specified.

Signed-off-by: Eddie Wai <eddie.wai@broadcom.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-08-28 19:42:06 -07:00
Linus Torvalds
91d41fdf31 Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending:
  target: Convert to DIV_ROUND_UP_SECTOR_T usage for sectors / dev_max_sectors
  kernel.h: Add DIV_ROUND_UP_ULL and DIV_ROUND_UP_SECTOR_T macro usage
  iscsi-target: Add iSCSI fabric support for target v4.1
  iscsi: Add Serial Number Arithmetic LT and GT into iscsi_proto.h
  iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]
  iscsi: Resolve iscsi_proto.h naming conflicts with drivers/target/iscsi
2011-07-27 13:21:40 -07:00
Andy Grover
55bdabdf41 iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]
struct scsi_lun is also just a struct with an array of 8 octets (64 bits)
but using it instead in iscsi structs lets us call scsilun_to_int
without a cast, and also lets us copy it using assignment, instead of
memcpy().

Signed-off-by: Andy Grover <agrover@redhat.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-07-25 07:47:59 +00:00
Nicholas Bellinger
123521830c iscsi: Resolve iscsi_proto.h naming conflicts with drivers/target/iscsi
This patch renames the following iscsi_proto.h structures to avoid
namespace issues with drivers/target/iscsi/iscsi_target_core.h:

*) struct iscsi_cmd -> struct iscsi_scsi_req
*) struct iscsi_cmd_rsp -> struct iscsi_scsi_rsp
*) struct iscsi_login -> struct iscsi_login_req

This patch includes useful ISCSI_FLAG_LOGIN_[CURRENT,NEXT]_STAGE*,
and ISCSI_FLAG_SNACK_TYPE_* definitions used by iscsi_target_mod, and
fixes the incorrect definition of struct iscsi_snack to following
RFC-3720 Section 10.16. SNACK Request.

Also, this patch updates libiscsi, iSER, be2iscsi, and bn2xi to
use the updated structure definitions in a handful of locations.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-25 07:18:45 +00:00
Linus Torvalds
d4e06701b8 Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (77 commits)
  [SCSI] fix crash in scsi_dispatch_cmd()
  [SCSI] sr: check_events() ignore GET_EVENT when TUR says otherwise
  [SCSI] bnx2i: Fixed kernel panic due to illegal usage of sc->request->cpu
  [SCSI] bfa: Update the driver version to 3.0.2.1
  [SCSI] bfa: Driver and BSG enhancements.
  [SCSI] bfa: Added support to query PHY.
  [SCSI] bfa: Added HBA diagnostics support.
  [SCSI] bfa: Added support for flash configuration
  [SCSI] bfa: Added support to obtain SFP info.
  [SCSI] bfa: Added support for CEE info and stats query.
  [SCSI] bfa: Extend BSG interface.
  [SCSI] bfa: FCS bug fixes.
  [SCSI] bfa: DMA memory allocation enhancement.
  [SCSI] bfa: Brocade-1860 Fabric Adapter vHBA support.
  [SCSI] bfa: Brocade-1860 Fabric Adapter PLL init fixes.
  [SCSI] bfa: Added Fabric Assigned Address(FAA) support
  [SCSI] bfa: IOC bug fixes.
  [SCSI] bfa: Enable ASIC block configuration and query.
  [SCSI] bnx2i: Updated copyright and bump version
  [SCSI] bnx2i: Modified to skip CNIC registration if iSCSI is not supported
  ...

Fix up some trivial conflicts in:
 - drivers/scsi/bnx2fc/{bnx2fc.h,bnx2fc_fcoe.c}:
	Crazy broadcom version number conflicts
 - drivers/target/tcm_fc/tfc_cmd.c
	Just trivial cleanups done on adjacent lines
2011-07-23 11:13:11 -07:00
Eddie Wai
0d83ab65ff [SCSI] bnx2i: Fixed kernel panic due to illegal usage of sc->request->cpu
A kernel panic was observed when passing the sc->request->cpu = -1 to
retrieve the per_cpu variable pointer:
 #0 [ffff880011203960] machine_kexec at ffffffff81022bc3
 #1 [ffff8800112039b0] crash_kexec at ffffffff81088630
 #2 [ffff880011203a80] __die at ffffffff8139ea20
 #3 [ffff880011203aa0] no_context at ffffffff8102f3a7
 #4 [ffff880011203ae0] __bad_area_nosemaphore at ffffffff8102f665
 #5 [ffff880011203ba0] retint_signal at ffffffff8139dd1f
 #6 [ffff880011203cc8] bnx2i_indicate_kcqe at ffffffffa03dc4f2
 #7 [ffff880011203da8] service_kcqes at ffffffffa03cb04f
 #8 [ffff880011203e68] cnic_service_bnx2x_kcq at ffffffffa03cb14a
 #9 [ffff880011203e88] cnic_service_bnx2x_bh at ffffffffa03cb1b3

The problem lies in the slow path sg_io (and perhaps sg_scsi_ioctl) call to
blk_get_request->get_request/wait->blk_alloc_request->blk_rq_init which
re-initializes the request->cpu to -1.  There is no assignment for cpu from
that to the request_fn call to low level drivers.

When this happens, the sc->request->cpu will be using the init value of
-1.  This will create a kernel panic when it hits bnx2i because the code
refers it to get the per_cpu variables ptr.

This change is to put in a guard against that and also for cases when
bio affinity/queue completion to the same cpu is not enabled.  In those
cases, the request->cpu will remain a -1 also.

This bug was created from commit:  b5cf6b63f7

For the case when the blk layer did not setup the request->cpu, bnx2i
will complete the sc with the current CPU of the thread.

Signed-off-by: Eddie Wai <eddie.wai@broadcom.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-07-21 14:03:27 -07:00
Michael Chan
415199f2bd cnic: Add VLAN ID as a parameter during netevent upcall
The bnx2fc driver needs to handle netdev events on VLAN devices.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Reviewed-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-21 12:38:32 -07:00
Eddie Wai
ea9582d721 [SCSI] bnx2i: Updated copyright and bump version
Bumped version from 2.6.2.3 to 2.7.0.3

Signed-off-by: Eddie Wai <eddie.wai@broadcom.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-06-29 16:54:13 -05:00
Eddie Wai
b5cf6b63f7 [SCSI] bnx2i: Added the use of kthreads to handle SCSI cmd completion
This patch breaks the SCSI cmd completion into two parts:
1. The bh will allocate and queued work to the cmd specific CPU IO
completion kthread.  The CPU for the cmd is from the sc->request->cpu.

2. The CPU specific IO completion kthread will call the scsi_cmd_resp
routine to do the actual cmd completion.

In the normal case, these IO completion kthreads should complete before
the blk IO times out at 60s.  However, in the case when these kthreads
are blocked for whatever reason and exceeded the timeout, the call
to conn_destroy will have to iterate and exhaust all related work in the
percpu work list for all online CPUs.  This will guarantee the protection
of the work->session and conn pointers before they get freed.

Also modified the event coalescing formula to have at least the
event_coal_min outstanding cmds in the pipeline so the SCSI producer
would not get underrun.

Also changed the following SCSI parameters:
- can_queue from 1024 to 2048
- cmds_per_lun from 24 to 128

Signed-off-by: Eddie Wai <eddie.wai@broadcom.com>
Acked-by: Benjamin Li <benli@broadcom.com>
Acked-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-06-29 16:48:23 -05:00
Andy Grover
516f43a2a5 [SCSI] iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]
struct scsi_lun is also just a struct with an array of 8 octets (64 bits)
but using it instead in iscsi structs lets us call scsilun_to_int
without a cast, and also lets us copy it using assignment, instead of
memcpy().

Signed-off-by: Andy Grover <agrover@redhat.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-06-29 16:22:13 -05:00
Eddie Wai
9ae58e144d [SCSI] bnx2i: Optimized the iSCSI offload performance
Modified the event coalescing code for iSCSI offload to combat both
corner cases and optimize performance as follows:

1. Added mechanism to loop back a second time to process any leftover
CQEs that was generated by the hardware during the time the driver is
busy processing previous CQEs in the bh.  This not only helps the
performance but also fixes the corner case when no more CQEs are being
generated in the pipeline; so those leftover CQEs will get a a chance
to be processed.

2. Added ARM_CQE_FP to distinguish between fast path arming versus
slow path arming.  This change will guarantee that the CQEs will
always get a chance to be re-armed during fast path completions.

3. Removed the inline event coalescing division for perf optimization.
Also fixed a division-by-zero error when the event_coal_div module
param was set to 0.

4. Changed the default SQ WQEs size from 256 to 128 to match chip
default.

5. Changed the cmd_per_lun from 32 to 24.

Signed-off-by: Eddie Wai <eddie.wai@broadcom.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <jbottomley@parallels.com>
2011-05-24 12:41:10 -04:00
Eddie Wai
7287c63e98 [SCSI] bnx2i: Fixed packet error created when the sq_size is set to 16
The number of chip's internal command cell, which is use to generate
SCSI cmd packets to the target, was not initialized correctly by
the driver when the sq_size is changed from the default 128.
This, in turn, will create a problem where the chip's transmit pipe
will erroneously reuse an old command cell that is no longer valid.
The fix is to correctly initialize the chip's command cell upon setup.

Signed-off-by: Eddie Wai <eddie.wai@broadcom.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Cc: stable@kernel.org
Signed-off-by: James Bottomley <jbottomley@parallels.com>
2011-05-24 12:40:45 -04:00
Lucas De Marchi
25985edced Fix common misspellings
Fixes generated by 'codespell' and manually reviewed.

Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-31 11:26:23 -03:00
Eddie Wai
09813ba5bc [SCSI] bnx2i: Added iSCSI text pdu support for iSCSI offload
This is part of an effort to support send target discovery via
the iSCSI offload path.

Signed-off-by: Eddie Wai <eddie.wai@broadcom.com>
Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-02-24 12:40:05 -05:00
Eddie Wai
ee15bd2da6 [SCSI] bnx2i: Fixed the 32-bit swapping of the LUN field for nopouts for 5771X
Fixed a bug where the 64-bit LUN field for nopouts were 32-bit swapped.
This only pertains to 5771X devices.

Signed-off-by: Eddie Wai <eddie.wai@broadcom.com>
Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-02-24 12:38:29 -05:00
Eddie Wai
70e1472271 [SCSI] bnx2i: Added reconnect fix connecting against Lefthand targets
The nopout's reserved field was not being initialized to zero
before being reused.  Stale CDB values from previous SCSI cmds
of the same BHS offset was the cause of the disconnection
initiated by the Lefthand target.

Signed-off-by: Eddie Wai <eddie.wai@broadcom.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-01-24 11:40:30 -06:00
Linus Torvalds
da40d036fd Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (147 commits)
  [SCSI] arcmsr: fix write to device check
  [SCSI] lpfc: lower stack use in lpfc_fc_frame_check
  [SCSI] eliminate an unnecessary local variable from scsi_remove_target()
  [SCSI] libiscsi: use bh locking instead of irq with session lock
  [SCSI] libiscsi: do not take host lock in queuecommand
  [SCSI] be2iscsi: fix null ptr when accessing task hdr
  [SCSI] be2iscsi: fix gfp use in alloc_pdu
  [SCSI] libiscsi: add more informative failure message during iscsi scsi eh
  [SCSI] gdth: Add missing call to gdth_ioctl_free
  [SCSI] bfa: remove unused defintions and misc cleanups
  [SCSI] bfa: remove inactive functions
  [SCSI] bfa: replace bfa_assert with WARN_ON
  [SCSI] qla2xxx: Use sg_next to fetch next sg element while walking sg list.
  [SCSI] qla2xxx: Fix to avoid recursive lock failure during BSG timeout.
  [SCSI] qla2xxx: Remove code to not reset ISP82xx on failure.
  [SCSI] qla2xxx: Display mailbox register 4 during 8012 AEN for ISP82XX parts.
  [SCSI] qla2xxx: Don't perform a BIG_HAMMER if Get-ID (0x20) mailbox command fails on CNAs.
  [SCSI] qla2xxx: Remove redundant module parameter permission bits
  [SCSI] qla2xxx: Add sysfs node for displaying board temperature.
  [SCSI] qla2xxx: Code cleanup to remove unwanted comments and code.
  ...
2011-01-07 12:47:02 -08:00
Michael Chan
939b82e5bd cnic: Improve ->iscsi_nl_msg_send()
1. Change first parameter from cnic_dev to ulp_handle which is the hba
pointer.  All other similar upcalls are using hba pointer.  The callee
can then directly reference the hba without conversion.

2. Change return value from void to int so that an error code can be
passed back.  This allows the operation to be retried.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-23 11:44:29 -08:00
Eddie Wai
11cec1e2e9 [SCSI] bnx2i: Updated copyright and maintainer info
Signed-off-by: Eddie Wai <eddie.wai@broadcom.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-21 12:24:15 -06:00
Eddie Wai
bee348770d [SCSI] bnx2i: Added return code check for chip kwqe submission request
Added the handling for cases when a chip request is made to the
CNIC module but the hardware is not ready to accept.  This would
lead to many unnecessary wait timeouts.
This code adds check in the connect establishment and destruction
path.

Signed-off-by: Eddie Wai <eddie.wai@broadcom.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-21 12:24:14 -06:00
Eddie Wai
94810e824d [SCSI] bnx2i: Fixed the remote TCP RST handling for the 570X (1g)
Modified the handling of the remote TCP RST code so the chip can now
flush the tx pipe accordingly upon a remote TCP RST reception.

Signed-off-by: Eddie Wai <eddie.wai@broadcom.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-21 12:24:12 -06:00
Eddie Wai
cf464fc5eb [SCSI] bnx2i: Fixed the endian bug in the TMF LUN cmd send
Added a be32_to_cpu call for the TMF LUN wqe.

Signed-off-by: Eddie Wai <eddie.wai@broadcom.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-21 12:24:11 -06:00
Eddie Wai
8eea2f55a6 [SCSI] bnx2i: Added fix for NOP-Out response panic from unsolicited NOP-In
The patch fixes the following situations where NOP-Out pkt is called for:
- local unsolicited NOP-Out requests (requesting no NOP-In response)
- local NOP-Out responses to unsolicited NOP-In requests

kernel panic is observed due to double session spin_lock requests; one in the
bnx2i_process_nopin_local_cmpl routine in bnx2i_hwi.c and the other in the
iscsi_put_task routine in libiscsi.c

The proposed fix is to export the currently static __iscsi_put_task() routine
and have bnx2i call it directly instead of the iscsi_put_task() routine which
holds the session spin lock.

Signed-off-by: Eddie Wai <eddie.wai@broadcom.com>
Reviewed-by: Michael Chan <mchan@broadcom.com>
Reviewed-by: Anil Veerabhadrappa <anilgv@broadcom.com>
Acked-by: Benjamin Li <benli@broadcom.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-21 12:24:10 -06:00
Eddie Wai
5ee3257626 [SCSI] bnx2i: Fixed bugs in the handling of unsolicited NOP-Ins
Unsolicited NOP-Ins are placed in the receive queue of the hardware
which requires to be read out regardless if the receive pipe is suspended
or not.  This patch adds the disposal of this RQ element under this
condition.
Also fixed the bug in the unsolicited NOP-In handling routine which
checks for the RESERVED_ITT.

Signed-off-by: Eddie Wai <eddie.wai@broadcom.com>
Reviewed-by: Michael Chan <mchan@broadcom.com>
Reviewed-by: Benjamin Li <benli@broadcom.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-21 12:24:10 -06:00
Linus Torvalds
5f05647dd8 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1699 commits)
  bnx2/bnx2x: Unsupported Ethtool operations should return -EINVAL.
  vlan: Calling vlan_hwaccel_do_receive() is always valid.
  tproxy: use the interface primary IP address as a default value for --on-ip
  tproxy: added IPv6 support to the socket match
  cxgb3: function namespace cleanup
  tproxy: added IPv6 support to the TPROXY target
  tproxy: added IPv6 socket lookup function to nf_tproxy_core
  be2net: Changes to use only priority codes allowed by f/w
  tproxy: allow non-local binds of IPv6 sockets if IP_TRANSPARENT is enabled
  tproxy: added tproxy sockopt interface in the IPV6 layer
  tproxy: added udp6_lib_lookup function
  tproxy: added const specifiers to udp lookup functions
  tproxy: split off ipv6 defragmentation to a separate module
  l2tp: small cleanup
  nf_nat: restrict ICMP translation for embedded header
  can: mcp251x: fix generation of error frames
  can: mcp251x: fix endless loop in interrupt handler if CANINTF_MERRF is set
  can-raw: add msg_flags to distinguish local traffic
  9p: client code cleanup
  rds: make local functions/variables static
  ...

Fix up conflicts in net/core/dev.c, drivers/net/pcmcia/smc91c92_cs.c and
drivers/net/wireless/ath/ath9k/debug.c as per David
2010-10-23 11:47:02 -07:00
Dmitry Kravkov
523224a3b3 bnx2x, cnic, bnx2i: use new FW/HSI
This is the new FW HSI blob and the relevant definitions without logic changes.
It also included code adaptation for new HSI. New features are not enabled.

New FW/HSI includes:
- Support for 57712 HW
- Future support for VF (not used)
- Improvements in FW interrupts scheme
- FW FCoE hooks (stubs for future usage)

Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-06 14:10:35 -07:00
Eddie Wai
c47b401230 [SCSI] bxn2i: Added support for other TMFs besides ABORT_TASK
Expanded the TMF request routine to support other TMFs such as LUN
RESET, etc.

Signed-off-by: Eddie Wai <eddie.wai@broadcom.com>
Reviewed-by: Anil Veerabhadrappa <anilgv@broadcom.com>
Reviewed-by: Benjamin Li <benli@broadcom.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-09-05 14:43:55 -03:00
Eddie Wai
39304072ac [SCSI] bnx2i: Fixed a protocol violation on nopout responses
According to RFC3720, nopout packet sent in response to unsolicited
nopin packet requesting a response must retain the TTT of the requester.

Signed-off-by: Eddie Wai <eddie.wai@broadcom.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-09-05 14:39:50 -03:00
Eddie Wai
2eefb20dbf [SCSI] bnx2i: Fixed the TCP graceful termination initiation
In compliance to RFC793, a TCP graceful termination will be used
instead of an abortive termination for the case where the remote
has initiated the close of the connection.
Additionally, a TCP abortive termination will be used to close the
connection when a logout response is not received in time after a
logout request has been initiated.

Signed-off-by: Eddie Wai <eddie.wai@broadcom.com>
Reviewed-by: Michael Chan <mchan@broadcom.com>
Reviewed-by: Benjamin Li <benli@broadcom.com>
Acked-by: Anil Veerabhadrappa <anilgv@broadcom.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-07-27 12:04:00 -05:00