That's the default now, no need for makefiles to set it.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Kalle Valo <kvalo@codeaurora.org>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Here's the "big" staging/iio pull request for 4.10-rc1.
Not as big as 4.9 was, but still just over a thousand changes. We
almost broke even of lines added vs. removed, as the slicoss driver was
removed (got a "clean" driver for the same hardware through the netdev
tree), and some iio drivers were also dropped, but I think we ended up
adding a few thousand lines to the source tree in the end. Other than
that it's a lot of minor fixes all over the place, nothing major stands
out at all.
All of these have been in linux-next for a while. There will be a merge
conflict with Al's vfs tree in the lustre code, but the resolution for
that should be pretty simple, that too has been in linux-next.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWFAk1Q8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymikACg05b0h/iVTTH18474PXXnzw6jk9IAn0gI2fx9
cqp2MglTvphhrXzddL7V
=MeTw
-----END PGP SIGNATURE-----
Merge tag 'staging-4.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging/IIO updates from Greg KH:
"Here's the "big" staging/iio pull request for 4.10-rc1.
Not as big as 4.9 was, but still just over a thousand changes. We
almost broke even of lines added vs. removed, as the slicoss driver
was removed (got a "clean" driver for the same hardware through the
netdev tree), and some iio drivers were also dropped, but I think we
ended up adding a few thousand lines to the source tree in the end.
Other than that it's a lot of minor fixes all over the place, nothing
major stands out at all.
All of these have been in linux-next for a while. There will be a
merge conflict with Al's vfs tree in the lustre code, but the
resolution for that should be pretty simple, that too has been in
linux-next"
* tag 'staging-4.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (1002 commits)
staging: comedi: comedidev.h: Document usage of 'detach' handler
staging: fsl-mc: remove unnecessary info prints from bus driver
staging: fsl-mc: add sysfs ABI doc
staging/lustre/o2iblnd: Fix misspelled attemps->attempts
staging/lustre/o2iblnd: Fix misspelling intialized->intialized
staging/lustre: Convert all bare unsigned to unsigned int
staging/lustre/socklnd: Fix whitespace problem
staging/lustre/o2iblnd: Add missing space
staging/lustre/lnetselftest: Fix potential integer overflow
staging: greybus: audio_module: remove redundant OOM message
staging: dgnc: Fix lines longer than 80 characters
staging: dgnc: fix blank line after '{' warnings.
staging/android: remove Sync Framework tasks from TODO
staging/lustre/osc: Revert erroneous list_for_each_entry_safe use
staging: slicoss: remove the staging driver
staging: lustre: libcfs: remove lnet upcall code
staging: lustre: remove set but unused variables
staging: lustre: osc: set lock data for readahead lock
staging: lustre: import: don't reconnect during connect interpret
staging: lustre: clio: remove mtime check in vvp_io_fault_start()
...
The test for NULL of the return variable of functions was changed from
(ret == NULL) to !ret to match the standard.
Coccinelle was used with semantic patch:
@@
expression e;
identifier id, f;
statement S;
@@
f(...) { <+...
id =
\(kmalloc\|devm_kzalloc\|kmalloc_array\|devm_ioremap
\|usb_alloc_urb\|alloc_netdev\|dev_alloc_skb\) (...)
... when any
when != id = e
+ if (!id)
- if (\(NULL == id\|id == NULL\))
S
...+> }
Signed-off-by: Elise Lennion <elise.lennion@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The rtllib_rx_extract_addr() is supposed to set up the mac addresses
for four possible cases, based on two bits of input data. For
some reason, gcc decides that it's possible that none of the these
four cases apply and the addresses remain uninitialized:
drivers/staging/rtl8192e/rtllib_rx.c: In function ‘rtllib_rx_InfraAdhoc’:
include/linux/etherdevice.h:316:61: error: ‘*((void *)&dst+4)’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
drivers/staging/rtl8192e/rtllib_rx.c:1318:5: note: ‘*((void *)&dst+4)’ was declared here
ded from /git/arm-soc/drivers/staging/rtl8192e/rtllib_rx.c:40:0:
include/linux/etherdevice.h:316:36: error: ‘dst’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
drivers/staging/rtl8192e/rtllib_rx.c:1318:5: note: ‘dst’ was declared here
This warning is clearly nonsense, but changing the last case into
'default' makes it obvious to the compiler too, which avoids the
warning and probably leads to better object code too.
As the same warning appears in other files that have the exact
same code, I'm fixing it in both rtl8192e and rtl8192u, even
though I did not observe it for the latter.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Declare the structure rtllib_qos_parameters as constant as it is only
passed as the second argument to the function memcpy. This argument
is constant so the fields of rtllib_qos_parameters structure are
never modified and hence it can be declared as const.
Done using coccinelle:
@r1 disable optional_qualifier @
identifier i;
position p;
@@
static struct rtllib_qos_parameters i@p = {...};
@ok1@
identifier r1.i;
position p;
expression e1,e2;
@@
memcpy(e1,&i@p,e2)
@bad@
position p!={r1.p,ok1.p};
identifier r1.i;
@@
i@p
@depends on !bad disable optional_qualifier@
identifier r1.i;
@@
static
+const
struct rtllib_qos_parameters i={...};
@depends on !bad disable optional_qualifier@
identifier r1.i;
@@
+const
struct rtllib_qos_parameters i;
File size before:
text data bss dec hex filename
30910 496 201 31607 7b77
drivers/staging/rtl8192e/rtl8192e/rtl_core.o
File size after:
text data bss dec hex filename
30942 464 201 31607 7b77
drivers/staging/rtl8192e/rtl8192e/rtl_core.o
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
With centralized MTU checking, there's nothing productive done by
eth_change_mtu that isn't already done in dev_set_mtu, so mark it as
deprecated and remove all usage of it in the kernel. All callers have been
audited for calls to alloc_etherdev* or ether_setup directly, which means
they all have a valid dev->min_mtu and dev->max_mtu. Now eth_change_mtu
prints out a netdev_warn about being deprecated, for the benefit of
out-of-tree drivers that might be utilizing it.
Of note, dvb_net.c actually had dev->mtu = 4096, while using
eth_change_mtu, meaning that if you ever tried changing it's mtu, you
couldn't set it above 1500 anymore. It's now getting dev->max_mtu also set
to 4096 to remedy that.
v2: fix up lantiq_etop, missed breakage due to drive not compiling on x86
CC: netdev@vger.kernel.org
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Replace the 0x888e with ETH_P_PAE and 0x0806 with ETH_P_ARP.
These macros can be found in drivers/staging/rtl8192e/rtllib.h
Hexadecimal numbers are not case sensitive,
therefore 0x888e is equal with 0x888E.
The modifications improve the readability of the code.
Signed-off-by: Georgiana Rodica Chelu <georgiana.chelu93@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
fixed use a blank line after function/struct/union/enum declarations
Signed-off-by: Darryl T. Agostinelli <dagostinelli@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
fixed statements should start on a tabstop
Signed-off-by: Darryl T. Agostinelli <dagostinelli@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
shifted over comment block one space
Signed-off-by: Darryl T. Agostinelli <dagostinelli@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Insert blank line after function declaration to resolve checkpatch
issue.
Signed-off-by: Namrata A Shettar <namrataashettar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add space around binary operator '+' to resolve checkpatch issue.
Signed-off-by: Namrata A Shettar <namrataashettar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add space around '+' to resolve checkpatch issue.
Signed-off-by: Namrata A Shettar <namrataashettar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use !x instead of x == NULL. This patch was found by checkpatch.
Signed-off-by: Sandhya Bankar <bankarsandhya512@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We get a few warnings when building kernel with W=1:
drivers/staging/rtl8192e/rtllib_softmac.c:279:13: warning: no previous declaration for 'softmac_ps_mgmt_xmit' [-Wmissing-declarations]
drivers/staging/rtl8192e/rtllib_softmac.c:773:24: warning: no previous declaration for 'rtllib_authentication_req' [-Wmissing-declarations]
....
In fact, these functions are only used in the file in which they are
declared and don't need a declaration, but can be made static.
In addition, some of these functions are declared in different files,
it looks like that we need to clean the codes of this driver up,
but we can repress these warnings first, then clean it up.
so this patch marks these functions with 'static' now.
Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For structure types defined in the same file or local header files, find
top-level static structure declarations that have the following
properties:
1. Never reassigned.
2. Address never taken
3. Not passed to a top-level macro call
4. No pointer or array-typed field passed to a function or stored in a
variable.
Declare structures having all of these properties as const.
Done using Coccinelle.
Based on a suggestion by Joe Perches <joe@perches.com>.
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The semaphore 'ips_sem' in the rtl8192e is a simple mutex, so it should
be written as one. Semaphores are going away in the future.
Signed-off-by: Binoy Jayan <binoy.jayan@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The semaphore 'scan_sem' in the rtl8192e is a simple mutex, so it should
be written as one. Semaphores are going away in the future.
Signed-off-by: Binoy Jayan <binoy.jayan@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The semaphore 'rf_sem' in the rtl8192e is a simple mutex, so it should
be written as one. Semaphores are going away in the future.
Signed-off-by: Binoy Jayan <binoy.jayan@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The semaphore 'wx_sem' in the r8192_priv is a simple mutex,
so it should be written as one. Semaphores are going away in the future.
Signed-off-by: Binoy Jayan <binoy.jayan@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The semaphore 'wx_sem' in the rtllib_device is a simple mutex,
so it should be written as one. Semaphores are going away in the future.
Signed-off-by: Binoy Jayan <binoy.jayan@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is one remaining warning about a type limit check in rtl8192e:
staging/rtl8192e/rtl819x_TSProc.c:326:14: error: comparison is always true due to limited range of data type [-Werror=type-limits]
This changes a macro into a local function to clarify the types and simplify
the check while removing the warning.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Compiling the rtlwifi drivers for ARM with gcc -Wextra warns about lots of
incorrect code that results from 'char' being unsigned here, e.g.
staging/rtl8192e/rtl8192e/r8192E_phy.c:1072:36: error: comparison is always false due to limited range of data type [-Werror=type-limits]
staging/rtl8192e/rtl8192e/r8192E_phy.c:1104:36: error: comparison is always false due to limited range of data type [-Werror=type-limits]
staging/rtl8192e/rtl8192e/rtl_core.c:1987:16: error: comparison is always false due to limited range of data type [-Werror=type-limits]
staging/rtl8192e/rtl8192e/rtl_dm.c:782:37: error: comparison is always false due to limited range of data type [-Werror=type-limits]
staging/rtl8192e/rtllib_softmac_wx.c:465:16: error: comparison is always false due to limited range of data type [-Werror=type-limits]
This patch changes all uses of 'char' in this driver that refer to
8-bit integers to use 's8' instead, which is signed on all architectures.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
a trans_start struct member exists twice:
- in struct net_device (legacy)
- in struct netdev_queue
Instead of open-coding dev->trans_start usage to obtain the current
trans_start value, use dev_trans_start() instead.
This is not exactly the same, as dev_trans_start also considers
the trans_start values of the netdev queues owned by the device
and provides the most recent one.
For legacy devices this doesn't matter as dev_trans_start can cope
with netdev trans_start values of 0 (they are ignored).
This is a prerequisite to eventual removal of dev->trans_start.
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Here is the big staging driver pull request for 4.6-rc1.
Lots of little things here, over 1600 patches or so. Notible is all of
the good Lustre work happening, those developers have finally woken up
and are cleaning up their code greatly. The Outreachy intern
application process is also happening, which brought in another 400 or
so patches. Full details are in the very long shortlog.
All of these have been in linux-next with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iEYEABECAAYFAlbrc3EACgkQMUfUDdst+ylu5ACgpdTKjrZn2vHElW3GRhTpzJdQ
wz8AoJDeur2DmBkQrKD5/u/WL4UTRNZJ
=+Q6N
-----END PGP SIGNATURE-----
Merge tag 'staging-4.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver updates from Greg KH:
"Here is the big staging driver pull request for 4.6-rc1.
Lots of little things here, over 1600 patches or so. Notable is all
of the good Lustre work happening, those developers have finally woken
up and are cleaning up their code greatly. The Outreachy intern
application process is also happening, which brought in another 400 or
so patches. Full details are in the very long shortlog.
All of these have been in linux-next with no reported issues"
* tag 'staging-4.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (1673 commits)
staging: lustre: fix aligments in lnet selftest
staging: lustre: report minimum of two buffers for LNet selftest load test
staging: lustre: test for proper errno code in lstcon_rpc_trans_abort
staging: lustre: filter remaining extra spacing for lnet selftest
staging: lustre: remove extra spacing when setting variable for lnet selftest
staging: lustre: remove extra spacing of variable declartions for lnet selftest
staging: lustre: fix spacing issues checkpatch reported in lnet selftest
staging: lustre: remove returns in void function for lnet selftest
staging: lustre: fix bogus lst errors for lnet selftest
staging: netlogic: Replacing pr_err with dev_err after the call to devm_kzalloc
staging: mt29f_spinand: Replacing pr_info with dev_info after the call to devm_kzalloc
staging: android: ion: fix up file mode
staging: ion: debugfs invalid gfp mask
staging: rts5208: Replace pci_enable_device with pcim_enable_device
Staging: ieee80211: Place constant on right side of the test.
staging: speakup: Replace del_timer with del_timer_sync
staging: lowmemorykiller: fix 2 checks that checkpatch complained
staging: mt29f_spinand: Drop void pointer cast
staging: rdma: hfi1: file_ops: Replace ALIGN with PAGE_ALIGN
staging: rdma: hfi1: driver: Replace IS_ALIGNED with PAGE_ALIGNED
...
This patch fixes the checkpatch warning that else is not generally
useful after a break or return.
This was done using Coccinelle:
@@
expression e2;
statement s1;
@@
if(e2) { ... return ...; }
-else
s1
Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The macro random_ether_addr is calling the function eth_random_addr.
Therefore, the call to random_ether_addr can be replaced with
eth_random_addr.
Remove the wrapper function rtllib_randomize_cell and replace its
call with eth_random_addr as it is wrapping random_ether_addr.
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
With conccurency managed workqueues, use of dedicated workqueues can
be replaced by system_wq. Drop priv_wq by using system_wq.
Since there are multiple work items per priv but they do not need
to be ordered, increase of concurrency by switching to system_wq
should not break anything.
All work items are sync canceled on so it is guaranteed that
no work is running when rtl92e_suspend function is called.
Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixed checkpatch.pl issue 'Blank lines aren't necessary before a close
brace'
Signed-off-by: Tapan Prakash T <tapanprakasht@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
With conccurency managed workqueues, use of dedicated workqueues can
be replaced by system_wq. Drop wq by using system_wq.
Since there are multiple work items per rtllib but they do not need to
be ordered, increase of concurrency by switching to system_wq should
not break anything.
All work items are sync canceled on rtllib_stop_protocol() so it is
guaranteed that no work is running when rtl92e_disable/reset/restart
functions are called.
Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Removed initialisation of a varible if it is immediately reassigned.
Changes were made using Coccinelle.
@@
type T;
constant C;
expression e;
identifier i;
@@
T i
- = C
;
i = e;
Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In this file, the values returned by rtllib_priv() are unnecessarily cast
into a pointer type in some assignment statements. Remove the cast as it
is unneeded.
Signed-off-by: Janani Ravichandran <janani.rvchndrn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Prefer using the eth_broadcast_addr() instead of memset to broadcast
address 0xFF to the array.
Signed-off-by: Hari Prasath Gujulan Elango <hgujulan@visteon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use to_delayed_work() instead of open-coding it.
Signed-off-by: Geliang Tang <geliangtang@163.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes a couple of issues detected by checkpatch with regard to blank lines.
Signed-off-by: Amadeusz Pawlik <potrzebye@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The rtllib driver is not calling try_module_get() when loading the
encryption modules. Because of this, you can never remove the module
once you have used it one (i.e. bring up the wireless interface).
Signed-off-by: Sean MacLennan <seanm@seanm.ca>
Tested-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The interfaces blkcipher and hash are obsolete. This patch replaces
them with skcipher and ahash respectively.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch removes unnecessary variable by using a single line of code
instead.
Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Drop ugly label as no resource cleanup is needed.
Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
