The APP TLVs are used for communicating priority-to-protocol ID maps for
a given netdevice. Support the following APP TLVs:
- DSCP (selector 5) to configure priority-to-DSCP code point maps. Use
these maps to configure packet priority on ingress, and DSCP code
point rewrite on egress.
- Default priority (selector 1, PID 0) to configure priority for the
DSCP code points that don't have one assigned by the DSCP selector. In
future this could also be used for assigning default port priority
when a packet arrives without DSCP tagging.
Besides setting up the maps themselves, also configure port trust level
and rewrite bits.
Port trust level determines whether, for a packet arriving through a
certain port, the priority should be determined based on PCP or DSCP
header fields. So far, mlxsw kept the device default of trust-PCP. Now,
as soon as the first DSCP APP TLV is configured, switch to trust-DSCP.
Only when all DSCP APP TLVs are removed, switch back to trust-PCP again.
Note that the default priority APP TLV doesn't impact the trust level
configuration.
Rewrite bits determine whether DSCP and PCP fields of egressing packets
should be updated according to switch priority. When port trust is
switched to DSCP, enable rewrite of DSCP field.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This register controls mapping from Priority to DSCP for purposes of
rewrite. Note that rewrite happens as the packet is transmitted provided
that the DSCP rewrite bit is enabled for the packet.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This register configures the rewrite enable (whether PCP or DSCP value
in packet should be updated according to packet priority) per receive
port.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The QPTS register controls the port policy to calculate the switch
priority and packet color based on incoming packet fields.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The QPDPM register controls the mapping from DSCP field to Switch
Priority for IP packets.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use designated function mlx5e_dma_get() to get
the mlx5e_sq_dma object to be pushed into fifo.
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Pointers in DB are static, move them to read-only area so they
do not share a cacheline with fields modified in datapath.
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
A loaded XDP program might write to the xdp_frame data area,
prefetchw() it to avoid a potential cache miss.
Performance tests:
ConnectX-5, XDP_TX packet rate, single ring.
CPU: Intel(R) Xeon(R) CPU E5-2680 v3 @ 2.50GHz
Before: 13,172,976 pps
After: 13,456,248 pps
2% gain.
Fixes: 22f4539881 ("net/mlx5e: Support XDP over Striding RQ")
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Add implementation for the ndo_xdp_xmit callback.
Dedicate a new set of XDP-SQ instances to satisfy the XDP_REDIRECT
requests. These instances are totally separated from the existing
XDP-SQ objects that satisfy local XDP_TX actions.
Performance tests:
xdp_redirect_map from ConnectX-5 to ConnectX-5.
CPU: Intel(R) Xeon(R) CPU E5-2680 v3 @ 2.50GHz
Packet-rate of 64B packets.
Single queue: 7 Mpps.
Multi queue: 55 Mpps.
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Eugenia Emantayev <eugenia@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
In the downstream patch that adds support to XDP_REDIRECT-out,
the XDP xmit frame function doesn't share the same run context as
the NAPI that polls the XDP-SQ completion queue.
Hence, need to re-order the XDP-SQ fields to avoid cacheline
false-sharing.
Take redirect_flush and doorbell out of DB, into separated
cachelines.
Add a cacheline breaker within the stats struct.
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Separate the XDP counters into two sets:
(1) One set reside in the RQ stats, and they monitor XDP stats
in the RQ side.
(2) Another set is per XDP-SQ, and they monitor XDP stats that
are related to XDP transmit flow.
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Eugenia Emantayev <eugenia@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Convert the XDP xmit functions to use the generic xdp_frame API
in XDP_TX flow.
Same functions will be used later in this series to transmit
the XDP redirect-out packets as well.
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Eugenia Emantayev <eugenia@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Add per-ring and total stats for received packets that
goes into XDP redirection.
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Take XDP code out of the general EN header and RX file into
new XDP files.
Currently, XDP-SQ resides only within an RQ and used from a
single flow (XDP_TX) triggered upon RX completions.
In a downstream patch, additional type of XDP-SQ instances will be
presented and used for the XDP_REDIRECT flow, totally unrelated to
the RX context.
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Add checks in control path upon an MTU change or an XDP program set,
to prevent reaching cases where large MTU and XDP are set simultaneously.
This is to make sure we allow XDP only with the linear RX memory scheme,
i.e. a received packet is not scattered to different pages.
Change mlx5e_rx_get_linear_frag_sz() accordingly, so that we make sure
the XDP configuration can really be set, instead of assuming that it is.
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Dedicate a function to all checks done when setting an XDP program.
Take indications from priv instead of netdev features.
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
No need to expose the MPWQE free function to control path.
The dealloc function already exposed, use it.
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Now that all the pieces are in place we can start using the A-TCAM
instead of only using the C-TCAM. This allows for much higher scale and
better performance (to be improved further by follow-up patch sets).
Perform the integration with the A-TCAM and the eRP core by reverting
the changes introduced by "mlxsw: spectrum_acl: Enable C-TCAM only mode
in eRP core" and add calls from the C-TCAM code into the eRP core.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Implement rule insertion and deletion into the A-TCAM before we flip the
driver to start using the A-TCAM.
Rule insertion into the A-TCAM is very similar to C-TCAM, but there are
subtle differences between regions of different sizes (i.e., different
number of key blocks).
Specifically, as explained in "mlxsw: spectrum_acl: Allow encoding a
partial key", in 12 key blocks regions a rule is split into two and the
two halves of the rule are linked using a "large entry key ID".
Such differences are abstracted away by using different region
operations per region type.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When A-TCAM will be used together with C-TCAM, the C-TCAM code will need
to call into the eRP core in order to get an eRP for an inserted entry.
The eRP core takes an A-TCAM region as one of its arguments, so pass the
C-TCAM region to the insertion function which will later allow us to
derive the A-TCAM region, given it contains the C-TCAM one.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Before we start using the A-TCAM we need to make sure the region is
properly initialized.
This includes the setting of its type (which affects the size of its eRP
table, for example) and its registration with the eRP core.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Each TCAM region currently uses its own resources and there is no
sharing between the different regions.
This is going to change with A-TCAM as each region will need to allocate
an eRP table from the global eRP tables array.
Make the global TCAM resources available to each region by passing the
TCAM private data to the region initialization routine.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In Spectrum-2 the C-TCAM is only used for rules that can't fit in the
A-TCAM due to a limited number of masks per A-TCAM region.
In addition, rules inserted into the C-TCAM may affect rules residing in
the A-TCAM, by clearing their C-TCAM prune bit.
The two regions are thus closely related and can be thought of as if the
C-TCAM region is encapsulated in the A-TCAM one.
Change the data structures to reflect that before introducing A-TCAM
support and make C-TCAM region initialization part of the A-TCAM region
initialization sequence.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Initialize the A-TCAM as part of the driver's initialization routine.
Specifically, initialize the eRP tables so that A-TCAM regions will be
able to perform allocations of eRP tables upon rule insertion in
subsequent patches.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When working with 12 key blocks in the A-TCAM, rules are split into two
records, which constitute two lookups. The two records are linked using
a "large entry key ID". The ID is assigned to key blocks 6 to 11 and
resolved during the first lookup. The second lookup is performed using
the ID and the remaining key blocks.
Allow encoding a partial key so that it can be later used to check if an
ID can be reused.
This is done by adding two arguments to the existing encode function
that specify the range of the block indexes we would like to encode. The
key and mask arguments become optional, as we will not need to encode
both of them all the time.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In a similar fashion to Spectrum-1's region struct, Spectrum-2's struct
needs to store a pointer to the common region struct.
The pointer will be used in follow-up patches that implement rules
insertion and deletion.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The number of eRPs that can be used by a single A-TCAM region is limited
to 16. When more eRPs are needed, an ordinary circuit TCAM (C-TCAM) can
be used to hold the extra eRPs.
Unlike the A-TCAM, only a single (last) lookup is performed in the
C-TCAM and not a lookup per-eRP. However, modeling the C-TCAM as extra
eRPs will allow us to easily introduce support for pruning in a
follow-up patch set and is also logically correct.
The following diagram depicts the relation between both TCAMs:
C-TCAM
+-------------------+ +--------------------+ +-----------+
| | | | | |
| eRP #1 (A-TCAM) +----> ... +----+ eRP #16 (A-TCAM) +----+ eRP #17 |
| | | | | ... |
+-------------------+ +--------------------+ | eRP #N |
| |
+-----------+
Lookup order is from left to right.
Extend the eRP core APIs with a C-TCAM parameter which indicates whether
the requested eRP is to be used with the C-TCAM or not.
Since the C-TCAM is only meant to absorb rules that can't fit in the
A-TCAM due to exceeded number of eRPs or key collision, an error is
returned when a C-TCAM eRP needs to be created when the eRP state
machine is in its initial state (i.e., 'no masks'). This should only
happen in the face of very unlikely errors when trying to push rules
into the A-TCAM.
In order not to perform unnecessary lookups, the eRP core will only
enable a C-TCAM lookup for a given region if it knows there are C-TCAM
eRPs present.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, no calls are performed into the eRP core, but in order to
make review easier we would like to gradually add these calls.
Have the eRP core initialize a region's master mask to all ones and
allow it to use an empty eRP table. This directs the lookup to the
C-TCAM and allows the C-TCAM only mode to continue working.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When rules are inserted into the A-TCAM they are associated with a mask,
which is part of the lookup key: { masked key, mask ID, region ID }.
These masks are called rule patterns (RP) and the aggregation of several
masks into one (to be introduced in follow-up patch sets) is called an
extended RP (eRP).
When a packet undergoes a lookup in an ACL region it is masked by the
current set of eRPs used by the region, looking for an exact match.
Eventually, the rule with the highest priority is picked.
These eRPs are stored in several global banks to allow for lookup to
occur using several eRPs simultaneously.
At first, an ACL region will only require a single mask - upon the
insertion of the first rule. In this case, the region can use the
"master RP" which is composed by OR-ing all the masks used by the
region. This mask is a property of the region and thus there is no need
to use the above mentioned banks.
At some point, a second mask will be needed. In this case, the region
will need to allocate an eRP table from the above mentioned banks and
insert its masks there.
>From now on, upon lookup, the eRP table used by the region will be
fetched from the eRP banks - using {eRP bank, Index within the bank} -
and the eRPs present in the table will be used to mask the packet. Note
that masks with consecutive indexes are inserted into consecutive banks.
When rules are deleted and a region only needs a single mask once again
it can free its eRP table and use the master RP.
The above logic is implemented in the eRP core and represented using the
following state machine:
+------------+ create mask - as master RP +---------------+
| +--------------------------------> |
| no masks | | single mask |
| <--------------------------------+ |
+------------+ delete mask +-----+--^------+
| |
| |
create mask - | | delete mask -
create mask transition to use eRP | | transition to
+--------+ table | | use master RP
| | | |
| | | |
+----v--------+----+ create mask +----v--+-----+
| <-------------------------------+ |
| multiple masks | | two masks |
| +-------------------------------> |
+------------------+ delete mask - if two +-------------+
remaining
The code that actually configures rules in the A-TCAM will interface
with the eRP core by getting or putting an eRP based on the required
mask used by the rule.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add the following resources to be used by A-TCAM code:
* Maximum number of eRP banks
* Maximum size of eRP bank
* Number of eRP entries required for a 2/4/8/12 key blocks mask
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a resource to make sure we do not exceed the maximum number of
supported large key IDs in a region.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The register is used to add and delete eRPs from the eRP table.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The register is used to configure rules in the A-TCAM.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Before introducing A-TCAM support we need to make sure all the necessary
fields are configurable and not hard coded to values that worked for the
C-TCAM only use case.
This includes - for example - the ability to configure the eRP table
used by the TCAM region.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Allow obtaining MTTs starting at any index,
thus give a better cache utilization.
For this, allow setting log_mtts_per_seg to 0, and use
this in default.
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Eli Cohen <eli@mellanox.co.il>
Signed-off-by: Anaty Rahamim Bar Kat <anaty@mellanox.com>
Reviewed-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>
Enable offloading of TC matching on tos/ttl for ipv4/6 tunnels.
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use the values provided by user-space for the encapsulation headers.
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currnetly, the ttl for the encapsulation headers is taken from the
route lookup result. As a pre-step to allow for an offload case when
the user specifies the ttl, take it from the route lookup only if
not zero. While here, also move to use u8 instead int for the ttl.
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Function mlx4_RST2INIT_QP_wrapper saved the qp number passed in the qp
context, rather than the one passed in the input modifier.
However, the qp number in the qp context is not defined as a
required parameter by the FW. Therefore, drivers may choose to not
specify the qp number in the qp context for the reset-to-init transition.
Thus, we must save the qp number passed in the command input modifier --
which is always present. (This saved qp number is used as the input
modifier for command 2RST_QP when a slave's qp's are destroyed).
Fixes: c82e9aa0a8 ("mlx4_core: resource tracking for HCA resources used by guests")
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Return extack messages in order to explain failures
of unsupported actions, keys and invalid user input.
Signed-off-by: Nir Dotan <nird@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Return extack messages for failures in action set creation.
Messages provide reasons for not being able to implement
the action in HW.
Signed-off-by: Nir Dotan <nird@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Return extack messages for failures in action set creation.
Errors may occur when action is not currently supported or due
to lack of resources.
Signed-off-by: Nir Dotan <nird@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Propagate extack pointer in order to add extack messages for ACL.
In the follow-up patches, appropriate messages will be added
in various points.
Signed-off-by: Nir Dotan <nird@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since cld_flower provides information about the filter template for
specific chain, use this information in order to prepare a region.
Use the template to find out what elements are going to be used
and pass that down to mlxsw_sp_acl_tcam_group_add(). Later on, when the
first filter is inserted, the mlxsw_sp_acl_tcam_group_use_patterns()
function would use this element usage information instead of looking
up a pattern.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch removes the splitting of UDP_GSO_L4 packets in the driver,
and exposes UDP_GSO_L4 as a PARTIAL_GSO feature. Thus, the network stack
is not responsible for splitting the packet into two.
Signed-off-by: Boris Pismenny <borisp@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
As we can configure two push/pop actions in one flow table entry,
add support to offload those double vlan actions in a rule to HW.
Signed-off-by: Jianbo Liu <jianbol@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Extract actions offloading code to a new function, and also extend data
structures for double vlan actions.
Signed-off-by: Jianbo Liu <jianbol@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
We can match on both outer and inner vlan tags, add support for
offloading that.
Signed-off-by: Jianbo Liu <jianbol@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
