asoc_simple_card_canonicalize_cpu() 2nd param is asking CPU component's
DAI links, not Card links.
This patch fixup it. Otherwise, audio-graph-card can't handle CPU
component correctly if CPU has mult-DAIs and Card uses only one of them
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Make crosstalk functoin optional.
The jack detection can speed up without crosstalk detection.
Let the decision of function usage to platform design.
The patch helps the issue concern as follows:
Google issue 35574278: Chell_headphone pop back from S3
There is a concern as follows:
cras getting blocked for 2 seconds (worst-case 3 seconds)
As I understand, ChromeOS expects resume finishes in 1 seconds.
Video/Audio playing after 3 seconds of resume seems against the spec.
If we really have to make the choice I would choose pop noise instead
of waiting for 3 seconds.
Signed-off-by: John Hsu <KCHSU0@nuvoton.com>
Signed-off-by: John Hsu <supercraig0719@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix the issue that mic type detection error after resume.
The microphone type detection procedure will recognize
testing signal on JKSLV pin, but before the procedure,
JKSLV already had supply voltage, that results in the failure.
Therefore, the patch turns off the power and reset the jack type
configuration before suspend. Then redo the jack detection
procedure after resume.
The patch help to fix the issue as follows:
Google issue 37973093: CTIA/OMTP jack type detection failure after resume
Reported Issue
Chrome OS Version : ChromeOS R59-9460.13.0
Type of hardware : DVT sample
What steps will reproduce the problem?
(1 Play a music
(2 Insert a headphones
(3 Close laptop lid 3 sec then open it
What is the expected output?
The music is normal in the headphones.
What do you see instead?
Singer voice in the music is not clear.
How frequently does this problem reproduce?
Always
What is the impact to the user, and is there a workaround?
If so, what is it?
Re-insert the headset or close the laptop lid and
then open it again can be repaired.
Signed-off-by: John Hsu <KCHSU0@nuvoton.com>
Signed-off-by: John Hsu <supercraig0719@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Assign default value for codec private data when property not given.
If without those default value and property, the codec will work
abnormally.
Signed-off-by: John Hsu <KCHSU0@nuvoton.com>
Signed-off-by: John Hsu <supercraig0719@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
It adds ASoC driver for AUD96P22 stereo audio codec integrated on ZTE
ZX family SoCs. The driver includes the support for a number of volume
and mute controls, and power bits for various playback and recording
components.
Due to that the board for testing only supports playback, recording
support is untested.
Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Without CONFIG_I2C, we get a build failure:
sound/soc/codecs/es8316.c:633:1: error: data definition has no type or storage class [-Werror]
sound/soc/codecs/es8316.c:633:1: error: type defaults to 'int' in declaration of 'module_i2c_driver' [-Werror=implicit-int]
sound/soc/codecs/es8316.c:633:1: error: parameter names (without types) in function declaration [-Werror]
sound/soc/codecs/es8316.c:623:26: error: 'es8316_i2c_driver' defined but not used [-Werror=unused-variable]
This adds the required Kconfig dependency.
Fixes: b8b88b7087 ("ASoC: add es8316 codec driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
The array ni_div does not need to be in global scope and is not
modified, so make it static const.
Cleans up sparse warning:
"symbol 'ni_div' was not declared. Should it be static?"
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-By: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch fixes this WARNING
sound/soc/sh/rcar/ssi.c:285:5-14: WARNING: Unsigned expression\
compared with zero: main_rate < 0
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
It doesn't use asm header. We can add COMPILE_TEST
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Except ALC269.
This will reduce pop noise from headset or headphone.
If codec enter to power save state, when plug headset or headphone....
It has a chance to cut off power by system.
Our new codec use this procedure will be more stable during suspend
and resume state.
Signed-off-by: Kailang Yang <kailang@realtek.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Rename:
wait_queue_t => wait_queue_entry_t
'wait_queue_t' was always a slight misnomer: its name implies that it's a "queue",
but in reality it's a queue *entry*. The 'real' queue is the wait queue head,
which had to carry the name.
Start sorting this out by renaming it to 'wait_queue_entry_t'.
This also allows the real structure name 'struct __wait_queue' to
lose its double underscore and become 'struct wait_queue_entry',
which is the more canonical nomenclature for such data types.
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This patch will enable headset mode for ALC234/ALC274/ALC294 platform.
Signed-off-by: Kailang Yang <kailang@realtek.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The ALSA PCM core refers to the appl_ptr value stored on the mmapped
page that is shared between kernel and user-space. Although the
reference is performed in the PCM stream lock, it doesn't guarantee
the atomic access when the value gets updated concurrently from the
user-space on another CPU.
In most of codes, this is no big problem, but still there are a few
places that may result in slight inconsistencies because they access
runtime->control->appl_ptr multiple times; that is, the second read
might be a different value from the first value. It can be even
backward or jumping, as we have no control for it. Hence, the
calculation may give an unexpected value. Luckily, there is no
security vulnerability by that, as far as I've checked. But still we
should address it.
This patch tries to reduce such possible cases. The fix is simple --
we just read once, store it to a local variable and use it for the
rest calculations. The READ_ONCE() macro is used for it in order to
avoid the ill-effect by possible compiler optimizations.
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When the codec device is unregistered / freed, it may release the
resource while being used in an unsolicited event like the jack
detection work. This leads to use-after-free.
The fix here is to unregister the device at first, i.e. removing the
codec from the list, then flushing the pending works to assure that
all unsol events are gone. After this point, we're free from
accessing the codec via unsol events, thus can release the resources
gracefully.
The issue was spotted originally by Intel CI, but it couldn't be
reproduced reliably by its nature. So let's hope this fix really
addresses the whole issues.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=196045
Reported-by: Martin Peres <martin.peres@free.fr>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We checked the quirks specific to the recent Intel chips by checking
the PCI IDs manually, but it's becoming messy with lots of IS_SKL()
and other macros, as the amount accumulated.
For simplification, here the new AZX_DRIVER_SKL type is introduced,
and check chip->driver_type instead of the manual PCI ID. The short
name for this is still "HDA Intel PCH", so that it doesn't break the
existing user-space unnecessarily.
Suggested-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Broxton-T was a forgotten child and we didn't apply the quirks for
Skylake+ properly. Meanwhile, a quirk for reducing the DMA latency
seems specific to the early Broxton model, so we leave as is.
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Remove Initialization from POD HD500X because it's not needed.
Every time the device is connected dmesg gives the following output:
"receive length failed (error -11)".
To solve this problem, another flags is introduced
(LINE6_CAP_CONTROL_INFO) and it is only used for PODX3 in: sysfs
entries, call podhd_startup_finalize(pod) and disconnection.
With this patch the error disappear.
Signed-off-by: Hans P. Moller <hmoller@uc.cl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add support for the Line6 POD HD500X multi effect processor for
playback and capture (in/out audio) through USB.
Signed-off-by: Hans P. Moller <hmoller@uc.cl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The SND_SOC_DAIFMT_MASTER bits are defined to specify the master/slave
mode for Codec, not I2S. So the I2S master/slave mode should be flipped
according to SND_SOC_DAIFMT_MASTER bits.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Currently compress driver hardcodes direction as playback to get
substream from the stream. This results in getting the incorrect
substream for compressed capture usecase.
To fix this, remove the hardcoding and derive substream based on
the stream direction.
Signed-off-by: Satish Babu Patakokila <sbpata@codeaurora.org>
Signed-off-by: Banajit Goswami <bgoswami@codeaurora.org>
Acked-By: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
At Linux v3.5, packet processing can be done in process context of ALSA
PCM application as well as software IRQ context for OHCI 1394. Below is
an example of the callgraph (some calls are omitted).
ioctl(2) with e.g. HWSYNC
(sound/core/pcm_native.c)
->snd_pcm_common_ioctl1()
->snd_pcm_hwsync()
->snd_pcm_stream_lock_irq
(sound/core/pcm_lib.c)
->snd_pcm_update_hw_ptr()
->snd_pcm_udpate_hw_ptr0()
->struct snd_pcm_ops.pointer()
(sound/firewire/*)
= Each handler on drivers in ALSA firewire stack
(sound/firewire/amdtp-stream.c)
->amdtp_stream_pcm_pointer()
(drivers/firewire/core-iso.c)
->fw_iso_context_flush_completions()
->struct fw_card_driver.flush_iso_completion()
(drivers/firewire/ohci.c)
= flush_iso_completions()
->struct fw_iso_context.callback.sc
(sound/firewire/amdtp-stream.c)
= in_stream_callback() or out_stream_callback()
->...
->snd_pcm_stream_unlock_irq
When packet queueing error occurs or detecting invalid packets in
'in_stream_callback()' or 'out_stream_callback()', 'snd_pcm_stop_xrun()'
is called on local CPU with disabled IRQ.
(sound/firewire/amdtp-stream.c)
in_stream_callback() or out_stream_callback()
->amdtp_stream_pcm_abort()
->snd_pcm_stop_xrun()
->snd_pcm_stream_lock_irqsave()
->snd_pcm_stop()
->snd_pcm_stream_unlock_irqrestore()
The process is stalled on the CPU due to attempt to acquire recursive lock.
[ 562.630853] INFO: rcu_sched detected stalls on CPUs/tasks:
[ 562.630861] 2-...: (1 GPs behind) idle=37d/140000000000000/0 softirq=38323/38323 fqs=7140
[ 562.630862] (detected by 3, t=15002 jiffies, g=21036, c=21035, q=5933)
[ 562.630866] Task dump for CPU 2:
[ 562.630867] alsa-source-OXF R running task 0 6619 1 0x00000008
[ 562.630870] Call Trace:
[ 562.630876] ? vt_console_print+0x79/0x3e0
[ 562.630880] ? msg_print_text+0x9d/0x100
[ 562.630883] ? up+0x32/0x50
[ 562.630885] ? irq_work_queue+0x8d/0xa0
[ 562.630886] ? console_unlock+0x2b6/0x4b0
[ 562.630888] ? vprintk_emit+0x312/0x4a0
[ 562.630892] ? dev_vprintk_emit+0xbf/0x230
[ 562.630895] ? do_sys_poll+0x37a/0x550
[ 562.630897] ? dev_printk_emit+0x4e/0x70
[ 562.630900] ? __dev_printk+0x3c/0x80
[ 562.630903] ? _raw_spin_lock+0x20/0x30
[ 562.630909] ? snd_pcm_stream_lock+0x31/0x50 [snd_pcm]
[ 562.630914] ? _snd_pcm_stream_lock_irqsave+0x2e/0x40 [snd_pcm]
[ 562.630918] ? snd_pcm_stop_xrun+0x16/0x70 [snd_pcm]
[ 562.630922] ? in_stream_callback+0x3e6/0x450 [snd_firewire_lib]
[ 562.630925] ? handle_ir_packet_per_buffer+0x8e/0x1a0 [firewire_ohci]
[ 562.630928] ? ohci_flush_iso_completions+0xa3/0x130 [firewire_ohci]
[ 562.630932] ? fw_iso_context_flush_completions+0x15/0x20 [firewire_core]
[ 562.630935] ? amdtp_stream_pcm_pointer+0x2d/0x40 [snd_firewire_lib]
[ 562.630938] ? pcm_capture_pointer+0x19/0x20 [snd_oxfw]
[ 562.630943] ? snd_pcm_update_hw_ptr0+0x47/0x3d0 [snd_pcm]
[ 562.630945] ? poll_select_copy_remaining+0x150/0x150
[ 562.630947] ? poll_select_copy_remaining+0x150/0x150
[ 562.630952] ? snd_pcm_update_hw_ptr+0x10/0x20 [snd_pcm]
[ 562.630956] ? snd_pcm_hwsync+0x45/0xb0 [snd_pcm]
[ 562.630960] ? snd_pcm_common_ioctl1+0x1ff/0xc90 [snd_pcm]
[ 562.630962] ? futex_wake+0x90/0x170
[ 562.630966] ? snd_pcm_capture_ioctl1+0x136/0x260 [snd_pcm]
[ 562.630970] ? snd_pcm_capture_ioctl+0x27/0x40 [snd_pcm]
[ 562.630972] ? do_vfs_ioctl+0xa3/0x610
[ 562.630974] ? vfs_read+0x11b/0x130
[ 562.630976] ? SyS_ioctl+0x79/0x90
[ 562.630978] ? entry_SYSCALL_64_fastpath+0x1e/0xad
This commit fixes the above bug. This assumes two cases:
1. Any error is detected in software IRQ context of OHCI 1394 context.
In this case, PCM substream should be aborted in packet handler. On the
other hand, it should not be done in any process context. TO distinguish
these two context, use 'in_interrupt()' macro.
2. Any error is detect in process context of ALSA PCM application.
In this case, PCM substream should not be aborted in packet handler
because PCM substream lock is acquired. The task to abort PCM substream
should be done in ALSA PCM core. For this purpose, SNDRV_PCM_POS_XRUN is
returned at 'struct snd_pcm_ops.pointer()'.
Suggested-by: Clemens Ladisch <clemens@ladisch.de>
Fixes: e9148dddc3c7("ALSA: firewire-lib: flush completed packets when reading PCM position")
Cc: <stable@vger.kernel.org> # 4.9+
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The MCLK for DA7219 does not change in this platform, but is
currently being configured everytime as part of the platform_clock
event handler for DAPM. The upshot of this is that we have
unnecessary calls to this function, and it also means that if
a stream hasn't yet been started, DA7219 driver does not have the
correct MCLK rates programmed and so the HP detection feature does
not operate as expected.
This patch rectifies this issue by moving the sysclk call to
codec_init function so it's only called once at initialisation.
Signed-off-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>
Acked-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently when HP detection procedure runs for certain MCLK
frequencies, when PLL is bypassed, the procedure will incorrectly
report Lineout instead of Headphones due to timing incosistencies.
To avoid this problem, the PLL is temporarily enabled (if currently
bypassed and MCLK present) to provide consistent timings for the
procedure, regardless of MCLK frequency.
Signed-off-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>
Acked-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds the deepbuffer device which can be opened with a bigger
buffer size. The application can disable interrupts and sleep for longer
duration.
Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
Acked-By: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
DMA buffer size for gateway copier will be calculated based on:
For host DMA copier:
Input buffer size (ibs) for output direction (playback)
Output buffer size (obs) for input direction (capture)
For link DMA copier:
IBS for input direction (capture)
OBS for output direction (playback)
Update the driver to use the above.
Signed-off-by: Ramesh Babu <ramesh.babu@intel.com>
Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
Acked-By: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
With this patch, the dma buffer size is fetched from topology binary. This
buffer size is applicable for gateway copier modules.
Now that we can configure DSP dma buffer size, the device can support deep
buffer playback. DSP fetches large buffer and can result fewer wakes,
which helps in power reduction.
Signed-off-by: Ramesh Babu <ramesh.babu@intel.com>
Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
Acked-By: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Use a specific flag for SAI and I2S interfaces,
instead of common flag.
Signed-off-by: olivier moysan <olivier.moysan@st.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Disable master clock by default, and activate
it only when requested.
Signed-off-by: olivier moysan <olivier.moysan@st.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Allow peripheral clock enable/disable on regmap accesses.
Signed-off-by: olivier moysan <olivier.moysan@st.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Current simple card driver is supporting widgets on DT,
other simple/audio card drivers will support it.
Encapsulation is one of simple card util's purpose.
Let's use asoc_simple_card_of_parse_widgets
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Current simple card drivers are parsing widgets on each own driver
(only simple-card at this point, but will be supported on all drivers)
Encapsulation is one of simple card util's purpose.
Let's add asoc_simple_card_of_parse_widgets for it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Current ak4613 accepts all range of Sampling Rate, but it depends on
inputed master clock. This patch adds hw constraint rule for it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Switch to use managed variant of acpi_dev_add_driver_gpios() to simplify
error path and fix potentially wrong assignment if ->probe() fails.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
GPIO ACPI mapping table is defined on platform basis. Codec driver
shouldn't have known what platform is using it.
Make codec driver more generic by moving platform code to where it
belongs.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
I2C devices are enumerated by IDs, and not by instances.
Make it clear by using proper module device table for ACPI case.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Just a tidy up to follow the standard EXPORT_SYMBOL*() declarations
in order to improve grep-ability.
- Move EXPORT_SYMBOL*() to the position right after its definition
- Remove superfluous blank line before EXPORT_SYMBOL*() lines
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Just a tidy up to follow the standard EXPORT_SYMBOL*() declarations
in order to improve grep-ability.
- Move EXPORT_SYMBOL*() to the position right after its definition
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Just a tidy up to follow the standard EXPORT_SYMBOL*() declarations
in order to improve grep-ability.
- Move EXPORT_SYMBOL*() to the position right after its definition
- Remove superfluous blank line before EXPORT_SYMBOL*() lines
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Just a tidy up to follow the standard EXPORT_SYMBOL*() declarations
in order to improve grep-ability.
- Remove superfluous blank line before EXPORT_SYMBOL*() lines
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Intel SST driver allocates lots of pages at suspend for saving the
firmware states, and this may occasionally lead to the allocation
error due to the high order, ending up with the suspend failure.
Use kvzalloc() so that it can fall back to vmalloc() gracefully.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
Add this functions, it could support ALC256 for HP depop functions.
It also can solve some ALC256 machine plug headset cause power
off issue.
Signed-off-by: Kailang Yang <kailang@realtek.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Use dma_alloc_attrs directly instead of the dma_alloc_noncoherent wrapper.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJZPdbLAAoJEHm+PkMAQRiGx4wH/1nCjfnl6fE8oJ24/1gEAOUh
biFdqJkYZmlLYHVtYfLm4Ueg4adJdg0wx6qM/4RaAzmQVvLfDV34bc1qBf1+P95G
kVF+osWyXrZo5cTwkwapHW/KNu4VJwAx2D1wrlxKDVG5AOrULH1pYOYGOpApEkZU
4N+q5+M0ce0GJpqtUZX+UnI33ygjdDbBxXoFKsr24B7eA0ouGbAJ7dC88WcaETL+
2/7tT01SvDMo0jBSV0WIqlgXwZ5gp3yPGnklC3F4159Yze6VFrzHMKS/UpPF8o8E
W9EbuzwxsKyXUifX2GY348L1f+47glen/1sedbuKnFhP6E9aqUQQJXvEO7ueQl4=
=m2Gx
-----END PGP SIGNATURE-----
BackMerge tag 'v4.12-rc5' into drm-next
Linux 4.12-rc5 for nouveau fixes
Current Renesas sound driver is assuming that all Sampling rate and
channles are possible to use, but these are depends on inputed clock
and SSI connection situation.
For example, if it is using 1 SSI, enabled TDM mode and has 12288000
input clock, 2ch output can support until 192000Hz, but 6ch output can
support until 64000Hz, 8ch can support 48000Hz.
To control these situation correctly, it needs to support
hw_constraints / refine feature.
To support such feature, this patch adds new
rsnd_soc_hw_rule/constraint() which adds hw rule of Channel and
Sampling Rate.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Current Renesas sound driver is assuming that all Sampling rate and
channles are possible to use, but these are depends on inputed clock
and SSI connection situation.
For example, if it is using 1 SSI, enabled TDM mode and has 12288000
input clock, 2ch output can support until 192000Hz, but 6ch output can
support until 64000Hz, 8ch can support 48000Hz.
To control these situation correctly, it needs to support
hw_constraints / refine feature.
To support such feature, this patch adds new rsnd_ssi_clk_query().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Current Renesas sound driver is assuming that all Sampling rate and
channles are possible to use, but these are depends on inputed clock
and SSI connection situation.
For example, if it is using 1 SSI, enabled TDM mode and has 12288000
input clock, 2ch output can support until 192000Hz, but 6ch output can
support until 64000Hz, 8ch can support 48000Hz.
To control these situation correctly, it needs to support
hw_constraints / refine feature.
To support such feature, it needs SSI clock query feature, and it needs
ADG clock query feature. Current ADG has rsnd_adg_ssi_clk_try_start()
and it is doing similar things, but it try to setup ADG register in
same time. This is not needed.
This patch adds new rsnd_adg_clk_query() and separates query feature
and register setting feature in adg.c
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Current Renesas sound driver has slots and slots_num in
struct rsnd_dai, but these are very un-understandable naming
(It had named from TDM slots).
In this driver, the "slots" means total usable channels, and
"stot_num" means SSI lane number if Multi SSI was used.
To more understandable code, this patch renames "slots" to
"max_channels", and "slots_num" to "ssi_lane", and replaces related
functions name.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Current simple/audio scu card drivers are supporting same
routing on DT, but, doesn't use same function for it.
Encapsulation is one of simple card util's purpose.
Let's use asoc_simple_card_of_parse_routing
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Current simple/audio scu card drivers are supporting same
routing on DT, but, doesn't use same function for it.
Encapsulation is one of simple card util's purpose.
Let's use asoc_simple_card_of_parse_routing
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Current simple/audio scu card drivers are supporting same
routing on DT, but, doesn't use same function for it.
Encapsulation is one of simple card util's purpose.
Let's use asoc_simple_card_of_parse_routing
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Current simple card drivers are parsing routing on each own driver.
Encapsulation is one of simple card util's purpose.
Let's add asoc_simple_card_of_parse_routing for it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Current simple/audio scu card drivers are supporting same
convert-rate/convert-channels on DT, but, doesn't use same function
for it.
Encapsulation is one of simple card util's purpose.
Let's use asoc_simple_card_parse_convert/asoc_simple_card_convert_fixup
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Current simple/audio scu card drivers are supporting same
convert-rate/convert-channels on DT, but, doesn't use same function
for it.
Encapsulation is one of simple card util's purpose.
Let's use asoc_simple_card_parse_convert/asoc_simple_card_convert_fixup
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Current simple/audio scu card drivers are supporting same
convert-rate/convert-channels on DT, but doesn't use same function
for it.
Encapsulation is one of simple card util's purpose.
Let's add asoc_simple_card_parse_convert/asoc_simple_card_convert_fixup
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
If this memory allocation fail, we must disable what has been enabled.
Do not return immediately but go thrue the error handling path instead.
Also use 'devm_kmemdup' instead of 'devm_kzalloc+memcpy' to simplify code.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds Kabylake I2S machine driver which uses codecs
MAX98927 as speakers and RT5514 as dmic on ssp0 and
RT5663 as headset on ssp1.
Signed-off-by: Harsha Priya <harshapriya.n@intel.com>
Signed-off-by: Naveen M <naveen.m@intel.com>
Acked-By: Vinod Koul <vinod.koul@intel.com>
C99 style struct initialization helps in readability as well as
initialization of variables not specified as NULL. This patch
changes the struct data definitions in skl.c that were not in c99 style.
Signed-off-by: Harsha Priya <harshapriya.n@intel.com>
Signed-off-by: Naveen M <naveen.m@intel.com>
Acked-By: Vinod Koul <vinod.koul@intel.com>
This patch adds Kabylake I2S machine driver which uses codecs
MAX98927 as speakers and RT5514 as dmic on ssp0 and
RT5663 as headset on ssp1.
Signed-off-by: Harsha Priya <harshapriya.n@intel.com>
Signed-off-by: Hsin-yu Chao <hychao@google.com>
Signed-off-by: Naveen M <naveen.m@intel.com>
Acked-By: Vinod Koul <vinod.koul@intel.com>
The standard PCM chmap helper callbacks treat the NULL info->chmap as
a fatal error and spews the kernel warning with stack trace when
CONFIG_SND_DEBUG is on. This was OK, originally it was supposed to be
always static and non-NULL. But, as the recent addition of Intel LPE
audio driver shows, the chmap content may vary dynamically, and it can
be even NULL when disconnected. The user still sees the kernel
warning unnecessarily.
For clearing such a confusion, this patch simply removes the
snd_BUG_ON() in each place, just returns an error without warning.
Cc: <stable@vger.kernel.org> # v4.11+
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Drivers can implement 'struct snd_pcm_ops.ioctl' to handle some requests
from ALSA PCM core. These requests are internal purpose in kernel land.
Usually common set of operations are used for it.
SNDRV_PCM_IOCTL1_INFO is one of the requests. According to code comment,
it has been obsoleted in the old days.
We can see old releases in ftp.alsa-project.org. The command was firstly
introduced in v0.5.0 release as SND_PCM_IOCTL1_INFO, to allow drivers to
fill data of 'struct snd_pcm_channel_info' type. In v0.9.0 release,
this was obsoleted by the other commands for ioctl(2) such as
SNDRV_PCM_IOCTL_CHANNEL_INFO.
This commit removes the long-abandoned command, bye.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Current simple card drivers are using asoc_simple_dai's tx_slot_mask,
rx_slot_mask, slots, slot_width directly to parse TDM.
Encapsulation is one of simple card util's purpose.
Let's use asoc_simple_card_of_parse_tdm for it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Current simple card drivers are using asoc_simple_dai's tx_slot_mask,
rx_slot_mask, slots, slot_width directly to parse TDM.
Encapsulation is one of simple card util's purpose.
Let's use asoc_simple_card_of_parse_tdm for it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Current simple card drivers are using asoc_simple_dai's tx_slot_mask,
rx_slot_mask, slots, slot_width directly to parse TDM.
Encapsulation is one of simple card util's purpose.
Let's use asoc_simple_card_of_parse_tdm for it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Current simple card drivers are using asoc_simple_dai's tx_slot_mask,
rx_slot_mask, slots, slot_width directly to parse TDM.
Encapsulation is one of simple card util's purpose.
Let's use asoc_simple_card_of_parse_tdm for it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
rsnd_dai_call() macro is using "priv" inside.
Thus, if caller function doesn't have "priv" related operation, strange
phenomenon occur which code is using "priv", but compiler indicates
"unused variable 'priv'".
>From code point of view, it is not problem, but it is very confusable.
This patch removes "priv" from rsnd_dai_call() macro, and adds "priv"
on caller function.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_pcm_hw_constraint_list(), *_ratnums() and *_ratdens() receive the
const pointers. Constify the corresponding static objects for better
hardening.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
The sgtl5000 features an automatic volume control block (AVC), which
reduces loud signals and amplifies low level signals for easier
listening. This patch adds support for this AVC block to the driver.
Apart from the "AVC Switch" control which enables the block following
controls for the configuration of AVC are added:
+ AVC Threshold Volume: threshold where audio is compressed when
the measured level is above or expanded when below
+ AVC Max Gain Volume: maximum gain which can be applied when
the measured audio level is below threshold
+ AVC Hard Limiter Switch: when enabled the signal is limited to
the programmed threshold.
+ AVC Integrator Response: response time of the integrator
The AVC block is enabled and configured using the DAP_AVC_CTRL and
DAP_AVC_THRESHOLD registers.
Following 2 checkpatch.pl strict checks are ignored because the
indentation style is different for the struct snd_kcontrol_new
definition:
patch:147: CHECK: Alignment should match open parenthesis
patch:150: CHECK: Alignment should match open parenthesis
Signed-off-by: Richard Leitner <richard.leitner@skidata.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Coffelake is another Intel part, so need to add PCI ID for it.
Signed-off-by: Megha Dey <megha.dey@intel.com>
Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We call ack callback whenever appl_ptr gets updated via
pcm_lib_apply_appl_ptr(). There are various code paths to call this
function. A part of them are for read/write/forward/rewind, where the
appl_ptr is always changed and thus the call of ack is mandatory.
OTOH, another part of code paths are from the explicit user call,
e.g. via SYNC_PTR ioctl. There, we may receive the same appl_ptr
value, and in such a case, calling ack is obviously superfluous.
This patch adds the check of the given appl_ptr value, and returns
immediately if it's no real update.
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Calling PREPARE ioctl to the stream in either PAUSED or SUSPENDED
state may confuse some drivers that don't handle the state properly.
Instead of fixing each driver, PCM core should take care of the proper
state change before actually trying to (re-)prepare the stream.
Namely, when the stream is in PAUSED state, it triggers PAUSE_RELEASE,
and when in SUSPENDED state, it triggers STOP, before calling prepare
callbacks.
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
So far, the PCM core refuses DROP ioctl when the stream in the
suspended state. This was basically to avoid the invalid state change
*during* the suspend. But since we protect the power change globally
in the common PCM ioctl caller side, it's guaranteed that
snd_pcm_drop() is called at the right power state. So we can assume
that the drop of stream is safe immediately after SUSPENDED state.
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
All PCM common ioctls should run only in the powered up state, but
currently only a few ioctls do the proper snd_power_lock() and
snd_power_wait() invocations. Instead of adding to each place, do it
commonly in the caller side, so that all these ioctls are assured to
be operated at the power up state.
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Use snd_pcm_action_lock_irq() helper instead of open coding.
No functional change.
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Current simple-card-utils sets asoc_simple_dai::clk via
asoc_simple_card_parse_clk().
Current simple card drivers are using it directly for
clk_enable/disable.
Encapsulation is one of simple card util's purpose.
Let's use asoc_simple_card_clk_enable/disable.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Current simple-card-utils sets asoc_simple_dai::clk via
asoc_simple_card_parse_clk().
Current simple card drivers are using it directly for
clk_enable/disable.
Encapsulation is one of simple card util's purpose.
Let's use asoc_simple_card_clk_enable/disable.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Current simple-card-utils sets asoc_simple_dai::clk via
asoc_simple_card_parse_clk().
Current simple card drivers are using it directly for
clk_enable/disable.
Encapsulation is one of simple card util's purpose.
Let's use asoc_simple_card_clk_enable/disable.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Current simple-card-utils sets asoc_simple_dai::clk via
asoc_simple_card_parse_clk().
Current simple card drivers are using it directly for
clk_enable/disable.
Encapsulation is one of simple card util's purpose.
Let's use asoc_simple_card_clk_enable/disable.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Current simple-card-utils sets asoc_simple_dai::clk via
asoc_simple_card_parse_clk().
Current simple card drivers are using it directly for
clk_enable/disable.
Encapsulation is one of simple card util's purpose.
Let's encapsulate it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
in order to guarantee i2s lrck signal integrity, when i2s stop,
need at least one lrck cycle to ensure signal integrity.
the max delay time is when lrck is 8khz, the delay time is
125us(1/8khz), using udelay(150) with a 25us margin.
Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
this patch add compatible for rk3228/rk3328 spdif,
Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
In order to make GPIO ACPI library stricter prepare users of
gpiod_get_index() to correctly behave when there no mapping is
provided by firmware.
Here we add explicit mapping between _CRS GpioIo() resources and
their names used in the driver.
Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Tested-by: Nicolas Porcel <nicolasporcel06@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Current SRC/DVC/CTU adds kctrl for each device,
and SRC can adjust its sampling rate during playback,
thus, this feature should be enabled only *during* playback.
This patch controls it more clearly
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Renesas Sound device *Hardware* L/R and Linux *Software* L/R are
inverted. Because of this background, it needs to convert L/R.
Then, DVC needs *Hardware* L/R, and Linux needs *Software* L/R.
Because Playback/Capture needs different timing, and there is no
explanation about it on source code / git log, this patch adds it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_pcm_hw_constraint_list(), *_ratnums() and *_ratdens() receive the
const pointers. Constify the corresponding static objects for better
hardening.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_pcm_hw_constraint_list(), *_ratnums() and *_ratdens() receive the
const pointers. Constify the corresponding static objects for better
hardening.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Acked-By: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_pcm_hw_constraint_list(), *_ratnums() and *_ratdens() receive the
const pointers. Constify the corresponding static objects for better
hardening.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_pcm_hw_constraint_list(), *_ratnums() and *_ratdens() receive the
const pointers. Constify the corresponding static objects for better
hardening.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_pcm_hw_constraint_list(), *_ratnums() and *_ratdens() receive the
const pointers. Constify the corresponding static objects for better
hardening.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Acked-By: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_pcm_hw_constraint_list(), *_ratnums() and *_ratdens() receive the
const pointers. Constify the corresponding static objects for better
hardening.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Acked-By: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
In the suspend, the IRQ function will not work in some machines. So the JD
status should be checked in the resume function.
Signed-off-by: Oder Chiou <oder_chiou@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Add new machine driver, tested with Weibu F3C MiniPC.
Based heavily on code provided by David Yang @ Everest, and other
machine drivers in the same directory.
Signed-off-by: David Yang <yangxiaohua@everest-semi.com>
[drake@endlessm.com: cleanups and modernization]
Signed-off-by: Daniel Drake <drake@endlessm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a codec driver for the Everest ES8316, based on code provided by
David Yang from Everest Semi.
I limited the functionality to items where the vendor code was clear,
and things that can be tested on the Weibu F3C (Intel Cherry Trail).
As a result the initial implementation only supports running in slave
mode at single speed (up to 48kHz sample rate) using I2S. HPD is not
supported.
Signed-off-by: David Yang <yangxiaohua@everest-semi.com>
[drake@endlessm.com: significant cleanups and simplifications,
remove dead/unclear code]
Signed-off-by: Daniel Drake <drake@endlessm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The Pulse Density Modulation Interface Controller (PDMC) is
a PDM interface controller and decoder that support PDM format.
It integrates a clock generator driving the PDM microphone
and embeds filters which decimate the incoming bit stream to
obtain most common audio rates.
Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
As long as I know, in userspace, '%c' format on printing format for
tracepoint is replaced with '>c<' by existent tracing program; i.g.
'perf-trace' and 'trace-cmd'. This is inconvenient.
This commit replaces the format with '%s'. The length of letters in the
format string is not changed, thus this commit doesn't increase object
size.
In theory, I should work for improvements of these tracing programs, but
here I'd like to save my time to work for the other projects.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In design of ALSA PCM core, status and control data for runtime of ALSA
PCM substream are shared between kernel/user spaces by page frame
mapping with read-only attribute. Both of hardware-side and
application-side position on PCM buffer are maintained as a part of
the status data. In a view of ALSA PCM application, these two positions
can be updated by executing ioctl(2) with some commands.
There's an event of tracepoint for hardware-side position; 'hwptr'.
On the other hand, no events for application-side position. This commit
adds a new event for this purpose; 'applptr'. When the application-side
position is changed in kernel space, this event is probed with useful
information for developers.
I note that the event is not probed for all of ALSA PCM applications, When
applications are written by read/write programming scenario, the event is
surely probed. The applications execute ioctl(2) with
SNDRV_PCM_IOCTL_[READ|WRITE][N/I]_FRAMES to read/write any PCM frame, then
ALSA PCM core updates the application-side position in kernel land.
However, when applications are written by mmap programming scenario, if
maintaining the application side position in kernel space accurately,
applications should voluntarily execute ioctl(2) with
SNDRV_PCM_IOCTL_SYNC_PTR to commit the number of handled PCM frames. If
not voluntarily, the application-side position is not changed, thus the
added event is not probed.
There's a loophole, using architectures to which ALSA PCM core judges
non cache coherent. In this case, the status and control data is not mapped
into processe's VMA for any applications. Userland library, alsa-lib, is
programmed for this case. It executes ioctl(2) with
SNDRV_PCM_IOCTL_SYNC_PTR command every time to requiring the status and
control data.
ARM is such an architecture. Below is an example with serial sound interface
(ssi) on i.mx6 quad core SoC. I use v4.1 kernel released by fsl-community
with patches from VIA Tech. Inc. for VAB820, and my backport patches for
relevant features for this patchset. I use Ubuntu 17.04 from
ports.ubuntu.com as user land for armhf architecture.
$ aplay -v -M -D hw:imx6vab820sgtl5,0 /dev/urandom -f S16_LE -r 48000 --period-size=128 --buffer-size=256
Playing raw data '/dev/urandom' : Signed 16 bit Little Endian, Rate 48000 Hz, Mono
Hardware PCM card 0 'imx6-vab820-sgtl5000' device 0 subdevice 0
Its setup is:
stream : PLAYBACK
access : MMAP_INTERLEAVED
format : S16_LE
subformat : STD
channels : 1
rate : 48000
exact rate : 48000 (48000/1)
msbits : 16
buffer_size : 256
period_size : 128
period_time : 2666
tstamp_mode : NONE
tstamp_type : MONOTONIC
period_step : 1
avail_min : 128
period_event : 0
start_threshold : 256
stop_threshold : 256
silence_threshold: 0
silence_size : 0
boundary : 1073741824
appl_ptr : 0
hw_ptr : 0
mmap_area[0] = 0x76f98000,0,16 (16)
$ trace-cmd record -e snd_pcm:hwptr -e snd_pcm:applptr
$ trace-cmd report
...
60.208495: applptr: pcmC0D0p/sub0: prev=1792, curr=1792, avail=0, period=128, buf=256
60.208633: applptr: pcmC0D0p/sub0: prev=1792, curr=1792, avail=0, period=128, buf=256
60.210022: hwptr: pcmC0D0p/sub0: IRQ: pos=128, old=1536, base=1536, period=128, buf=256
60.210202: applptr: pcmC0D0p/sub0: prev=1792, curr=1792, avail=128, period=128, buf=256
60.210344: hwptr: pcmC0D0p/sub0: POS: pos=128, old=1664, base=1536, period=128, buf=256
60.210348: applptr: pcmC0D0p/sub0: prev=1792, curr=1792, avail=128, period=128, buf=256
60.210486: applptr: pcmC0D0p/sub0: prev=1792, curr=1792, avail=128, period=128, buf=256
60.210626: applptr: pcmC0D0p/sub0: prev=1792, curr=1920, avail=0, period=128, buf=256
60.211002: applptr: pcmC0D0p/sub0: prev=1920, curr=1920, avail=0, period=128, buf=256
60.211142: hwptr: pcmC0D0p/sub0: POS: pos=128, old=1664, base=1536, period=128, buf=256
60.211146: applptr: pcmC0D0p/sub0: prev=1920, curr=1920, avail=0, period=128, buf=256
60.211287: applptr: pcmC0D0p/sub0: prev=1920, curr=1920, avail=0, period=128, buf=256
60.212690: hwptr: pcmC0D0p/sub0: IRQ: pos=0, old=1664, base=1536, period=128, buf=256
60.212866: applptr: pcmC0D0p/sub0: prev=1920, curr=1920, avail=128, period=128, buf=256
60.212999: hwptr: pcmC0D0p/sub0: POS: pos=0, old=1792, base=1792, period=128, buf=256
60.213003: applptr: pcmC0D0p/sub0: prev=1920, curr=1920, avail=128, period=128, buf=256
60.213135: applptr: pcmC0D0p/sub0: prev=1920, curr=1920, avail=128, period=128, buf=256
60.213276: applptr: pcmC0D0p/sub0: prev=1920, curr=2048, avail=0, period=128, buf=256
60.213654: applptr: pcmC0D0p/sub0: prev=2048, curr=2048, avail=0, period=128, buf=256
60.213796: hwptr: pcmC0D0p/sub0: POS: pos=0, old=1792, base=1792, period=128, buf=256
60.213800: applptr: pcmC0D0p/sub0: prev=2048, curr=2048, avail=0, period=128, buf=256
60.213937: applptr: pcmC0D0p/sub0: prev=2048, curr=2048, avail=0, period=128, buf=256
60.215356: hwptr: pcmC0D0p/sub0: IRQ: pos=128, old=1792, base=1792, period=128, buf=256
60.215542: applptr: pcmC0D0p/sub0: prev=2048, curr=2048, avail=128, period=128, buf=256
60.215679: hwptr: pcmC0D0p/sub0: POS: pos=128, old=1920, base=1792, period=128, buf=256
60.215683: applptr: pcmC0D0p/sub0: prev=2048, curr=2048, avail=128, period=128, buf=256
60.215813: applptr: pcmC0D0p/sub0: prev=2048, curr=2048, avail=128, period=128, buf=256
60.215947: applptr: pcmC0D0p/sub0: prev=2048, curr=2176, avail=0, period=128, buf=256
...
We can surely see 'applptr' event is probed even if the application run
for mmap programming scenario ('-M' option and 'hw' plugin). Below is a
result of strace:
02:44:15.886382 ioctl(4, SNDRV_PCM_IOCTL_SYNC_PTR, 0x56a32b30) = 0
02:44:15.887203 poll([{fd=4, events=POLLOUT|POLLERR|POLLNVAL}], 1, -1) = 1 ([{fd=4, revents=POLLOUT}])
02:44:15.887471 ioctl(4, SNDRV_PCM_IOCTL_SYNC_PTR, 0x56a32b30) = 0
02:44:15.887637 ioctl(4, SNDRV_PCM_IOCTL_SYNC_PTR, 0x56a32b30) = 0
02:44:15.887805 ioctl(4, SNDRV_PCM_IOCTL_SYNC_PTR, 0x56a32b30) = 0
02:44:15.887969 ioctl(4, SNDRV_PCM_IOCTL_SYNC_PTR, 0x56a32b30) = 0
02:44:15.888132 read(3, "..."..., 256) = 256
02:44:15.889040 ioctl(4, SNDRV_PCM_IOCTL_SYNC_PTR, 0x56a32b30) = 0
02:44:15.889221 ioctl(4, SNDRV_PCM_IOCTL_SYNC_PTR, 0x56a32b30) = 0
02:44:15.889431 ioctl(4, SNDRV_PCM_IOCTL_SYNC_PTR, 0x56a32b30) = 0
02:44:15.889606 poll([{fd=4, events=POLLOUT|POLLERR|POLLNVAL}], 1, -1) = 1 ([{fd=4, revents=POLLOUT}])
02:44:15.889833 ioctl(4, SNDRV_PCM_IOCTL_SYNC_PTR, 0x56a32b30) = 0
02:44:15.889998 ioctl(4, SNDRV_PCM_IOCTL_SYNC_PTR, 0x56a32b30) = 0
02:44:15.890164 ioctl(4, SNDRV_PCM_IOCTL_SYNC_PTR, 0x56a32b30) = 0
02:44:15.891048 ioctl(4, SNDRV_PCM_IOCTL_SYNC_PTR, 0x56a32b30) = 0
02:44:15.891228 read(3, "..."..., 256) = 256
02:44:15.891497 ioctl(4, SNDRV_PCM_IOCTL_SYNC_PTR, 0x56a32b30) = 0
02:44:15.891661 ioctl(4, SNDRV_PCM_IOCTL_SYNC_PTR, 0x56a32b30) = 0
02:44:15.891829 ioctl(4, SNDRV_PCM_IOCTL_SYNC_PTR, 0x56a32b30) = 0
02:44:15.891991 poll([{fd=4, events=POLLOUT|POLLERR|POLLNVAL}], 1, -1) = 1 ([{fd=4, revents=POLLOUT}])
02:44:15.893007 ioctl(4, SNDRV_PCM_IOCTL_SYNC_PTR, 0x56a32b30) = 0
We can see 7 calls of ioctl(2) with SNDRV_PCM_IOCTL_SYNC_PTR per loop with
call of poll(2). 128 PCM frames are transferred per loop of one poll(2),
because the PCM substream is configured with S16_LE format and 1 channel
(2 byte * 1 * 128 = 256 bytes). This equals to the size of period of PCM
buffer. Comparing to the probed data, one of the 7 calls of ioctl(2) is
actually used to commit the number of copied PCM frames to kernel space.
The other calls are just used to check runtime status of PCM substream;
e.g. XRUN.
The tracepoint event is useful to investigate this case. I note that below
modules are related to the above sample.
* snd-soc-dummy.ko
* snd-soc-imx-sgtl5000.ko
* snd-soc-fsl-ssi.ko
* snd-soc-imx-pcm-dma.ko
* snd-soc-sgtl5000.ko
My additional note is lock acquisition. The event is probed under acquiring
PCM stream lock. This means that calculation in the event is free from
any hardware events.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In a series of recent work, ALSA PCM core got some arrangements to handle
application-side position on PCM buffer. However, relevant codes still
disperse to two translation units
This commit unifies these codes into a helper function.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Many drivers bind the sequencer stuff in off-load by another driver
module, so that it's loaded only on demand. In the current code, this
mechanism doesn't work when the driver is built-in while the sequencer
is module. We check with IS_REACHABLE() and enable only when the
sequencer is in the same level of build.
However, this is basically a overshoot. The binder code
(snd-seq-device) is an individual module from the sequencer core
(snd-seq), and we just have to make the former a built-in while
keeping the latter a module for allowing the scenario like the above.
This patch achieves that by rewriting Kconfig slightly. Now, a driver
that provides the manual sequencer device binding should select
CONFIG_SND_SEQ_DEVICE in a way as
select SND_SEQ_DEVICE if SND_SEQUENCER != n
Note that the "!=n" is needed here to avoid the influence of the
sequencer core is module while the driver is built-in.
Also, since rawmidi.o may be linked with snd_seq_device.o when
built-in, we have to shuffle the code to make the linker happy.
(the kernel linker isn't smart enough yet to handle such a case.)
That is, snd_seq_device.c is moved to sound/core from sound/core/seq,
as well as Makefile.
Last but not least, the patch replaces the code using IS_REACHABLE()
with IS_ENABLED(), since now the condition meets always when enabled.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
At present, trace events are probed even if corresponding parameter is
not actually changed. This is inconvenient.
This commit improves the behaviour.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When refining mask/interval parameters, helper functions can return error
code. This error is not handled immediately. This seems to return
parameters to userspace applications in its meddle of processing.
However, in general, when receiving error from system calls, the
application might not handle argument buffer. It's reasonable to
judge the above design as superfluity.
This commit handles the error immediately.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Instead of the non-standard way to enable the build of snd-emux-synth
module inside Makefile, rewrite Kconfig to select the item explicitly
from each driver (sbawe and emu10k1). This is the standard way.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This is a slightly intensive rewrite of Kconfig and Makefile about
ALSA sequencer stuff.
The first major change is that the kconfig items for the sequencer are
moved to sound/core/seq/Kconfig. OK, that's easy.
The substantial change is that, instead of hackish top-level module
selection in Makefile, we define a Kconfig item for each sequencer
module. The driver that requires such sequencer components select
exclusively the kconfig items. This is more straightforward and
standard way.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Currently OSS sequencer emulation is tied with ALSA sequencer core,
both are built in the same level; i.e. when CONFIG_SND_SEQUENCER=y,
the OSS sequencer emulation is also always built-in, even though the
functionality can be built as an individual module.
This patch changes the rule and allows users to build snd-seq-oss
module while others are built-in. Essentially, it's just a few simple
changes in Kconfig and Makefile. Some driver codes like opl3 need to
convert from the simple ifdef to IS_ENABLED(). But that's all.
You might wonder how about the dependency: right, it can be messy, but
it still works. Since we rewrote the sequencer binding with the
standard bus, the driver can be bound at any time on demand. So, the
synthesizer driver module can be loaded individually from the OSS
emulation core before/after it.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Current topology only allows for widget configuration before the widget
is registered. This patch also allows further configuration and usage
after registration is complete.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Use sysfs_match_string() helper instead of open coded variant.
Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
Cc: Jarkko Nikula <jarkko.nikula@bitmer.com>
Cc: Mark Brown <broonie@kernel.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently CONFIG_SND_OSSEMUL is selected by each config like
CONFIG_SND_PCM_OSS. But, as see in the raw MIDI code that is built
conditionally with CONFIG_SND_OSSEMUL, we should rather make
CONFIG_SND_OSSEMUL user-selectable as the top kconfig item, and leave
the rest depending on it.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Use the same print format of snd_pcm_debug_name() for userspace tracing
program.
Suggested-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Results of ioctl(2) with SNDRV_PCM_IOCTL_HW_REFINE and
SNDRV_PCM_IOCTL_HW_PARAMS are different, because the latter has single
value for several parameters; e.g. channels of PCM substream. Selection
of the single value is done independently of application of constraints.
It's helpful for developers to trace the selection process.
This commit adds tracepoints to snd_pcm_hw_params_choose() for the
purpose.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
As of v4.12, snd_pcm_hw_params_choose() is just called in a process
context of ioctl(2) with SNDRV_PCM_IOCTL_HW_PARAMS. The function locates
in a different file, which has no tracepoints.
This commit moves the function to a file with the tracepoints for later
commit.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
snd_pcm_hw_constraint_list(), *_ratnums() and *_ratdens() receive the
const pointers. Constify the corresponding static objects for better
hardening.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
snd_pcm_hw_constraint_list(), *_ratnums() and *_ratdens() receive the
const pointers. Constify the corresponding static objects for better
hardening.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
snd_pcm_hw_constraint_list(), *_ratnums() and *_ratdens() receive the
const pointers. Constify the corresponding static objects for better
hardening.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
snd_pcm_hw_constraint_list(), *_ratnums() and *_ratdens() receive the
const pointers. Constify the corresponding static objects for better
hardening.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
snd_pcm_hw_constraint_list(), *_ratnums() and *_ratdens() receive the
const pointers. Constify the corresponding static objects for better
hardening.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
snd_pcm_hw_constraint_list(), *_ratnums() and *_ratdens() receive the
const pointers. Constify the corresponding static objects for better
hardening.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
snd_pcm_hw_constraint_list(), *_ratnums() and *_ratdens() receive the
const pointers. Constify the corresponding static objects for better
hardening.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
snd_pcm_hw_constraint_list(), *_ratnums() and *_ratdens() receive the
const pointers. Constify the corresponding static objects for better
hardening.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
snd_pcm_hw_constraint_list(), *_ratnums() and *_ratdens() receive the
const pointers. Constify the corresponding static objects for better
hardening.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
snd_pcm_hw_constraint_list(), *_ratnums() and *_ratdens() receive the
const pointers. Constify the corresponding static objects for better
hardening.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
snd_pcm_hw_constraint_list(), *_ratnums() and *_ratdens() receive the
const pointers. Constify the corresponding static objects for better
hardening.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
snd_pcm_hw_constraint_list(), *_ratnums() and *_ratdens() receive the
const pointers. Constify the corresponding static objects for better
hardening.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
snd_pcm_hw_constraint_list(), *_ratnums() and *_ratdens() receive the
const pointers. Constify the corresponding static objects for better
hardening.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
snd_pcm_hw_constraint_list(), *_ratnums() and *_ratdens() receive the
const pointers. Constify the corresponding static objects for better
hardening.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
snd_pcm_hw_constraint_list(), *_ratnums() and *_ratdens() receive the
const pointers. Constify the corresponding static objects for better
hardening.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
snd_pcm_hw_constraint_list(), *_ratnums() and *_ratdens() receive the
const pointers. Constify the corresponding static objects for better
hardening.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
snd_pcm_hw_constraint_list(), *_ratnums() and *_ratdens() receive the
const pointers. Constify the corresponding static objects for better
hardening.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
snd_pcm_hw_constraint_list(), *_ratnums() and *_ratdens() receive the
const pointers. Constify the corresponding static objects for better
hardening.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
snd_pcm_hw_constraint_list(), *_ratnums() and *_ratdens() receive the
const pointers. Constify the corresponding static objects for better
hardening.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
snd_pcm_hw_constraint_list(), *_ratnums() and *_ratdens() receive the
const pointers. Constify the corresponding static objects for better
hardening.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
snd_pcm_hw_constraint_list(), *_ratnums() and *_ratdens() receive the
const pointers. Constify the corresponding static objects for better
hardening.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
snd_pcm_hw_constraint_list(), *_ratnums() and *_ratdens() receive the
const pointers. Constify the corresponding static objects for better
hardening.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
snd_pcm_hw_constraint_list(), *_ratnums() and *_ratdens() receive the
const pointers. Constify the corresponding static objects for better
hardening.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
snd_pcm_hw_constraint_list(), *_ratnums() and *_ratdens() receive the
const pointers. Constify the corresponding static objects for better
hardening.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
snd_pcm_hw_constraint_list(), *_ratnums() and *_ratdens() receive the
const pointers. Constify the corresponding static objects for better
hardening.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
