Commit Graph

1144 Commits

Author SHA1 Message Date
Chris Brandt
cfddd3db08 ARM: dts: r7s72100: add ostm clock to device tree
Signed-off-by: Chris Brandt <chris.brandt@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-01-24 13:25:04 +01:00
Martin Blumenstingl
33d0fcdfe0 clk: gxbb: add the SAR ADC clocks and expose them
The HHI_SAR_CLK_CNTL contains three SAR ADC specific clocks:
- a mux clock to choose between different ADC reference clocks (this is
  2-bit wide, but the datasheet only lists the parents for the first
  bit)
- a divider for the input/reference clock
- a gate which enables the ADC clock

Additionally this exposes the ADC core clock (CLKID_SAR_ADC) and
CLKID_SANA (which seems to enable the analog inputs, but unfortunately
there is no documentation for this - we just mimic what the vendor
driver does).

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Tested-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2017-01-23 10:18:21 -08:00
Maxime Ripard
5e73761786 clk: sunxi-ng: Add sun5i CCU driver
The Allwinner A10s, A13, R8 and NextThing GR8 are all based on the same
silicon, and all share the same clocks.

However, they're not packaged in the same way, and therefore not all the
controllers are actually available on all these SoCs.

Introduce a clock controller driver for all these SoCs with different
compatibles to take that into account.

Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-01-23 11:45:29 +01:00
Jacob Chen
db86dadf18 clk: rockchip: add rk3288 vip_out clock id
Add clock-ids for the vip block of the rk3288

Signed-off-by: Jacob Chen <jacob-chen@iotwrt.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2017-01-22 17:07:03 +01:00
Gabriel Fernandez
52af8557bb clk: stm32f7: Add stm32f7 clock DT bindings for STM32F746 boards
This patch introduces the stm32f7 clock DT bindings.

Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-01-20 16:37:43 -08:00
Fabio Estevam
6847c4c296 clk: imx7d: Add the OCOTP clock
Add the OCOTP so that this hardware block can be used.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-01-20 16:27:19 -08:00
Eric Anholt
8a39e9fa57 clk: bcm2835: Register the DSI0/DSI1 pixel clocks.
The DSI pixel clocks are muxed from clocks generated in the analog phy
by the DSI driver.  In order to set them as parents, we need to do the
same name lookup dance on them as we do for our root oscillator.

Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-01-20 16:22:55 -08:00
Stephen Boyd
060982670b A new clock-type for the 1-2 muxes per soc that are for whatever reason
controlled through the General Register Files, support for the rk3328
 clock-controller (including a new pll-type) and the usual clock ids and
 some fixes.
 -----BEGIN PGP SIGNATURE-----
 
 iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAlh+vFMQHGhlaWtvQHNu
 dGVjaC5kZQAKCRDzpnnJnNEdgf7TCACncJmYlvYp+aZEgBlEcyCTulHNSyRZHVPd
 c4zBsgZmgxqmgrxe8YsW6DcfPP96MtL/C/fIupxTphxxfAS5HQx2KCeVpOrfffk7
 lJ1CPyCP5GdjaZ98hKVuMpKVkQu1u26DTNWSy62hbSQQndbpP0NbGsIJJUFia1vm
 JX0POVYt0xSo6GnbVRcKN/5b9k0HJNG9aejL8u/uA3+yr8diiKzYrtnaFzai5kvE
 3LgXIDGPUZVfwZ2vrJfDCYqNlij/tF2yLIhEDDoMSl00WolJfmnMKOg1Lt0DzuMz
 OQY6ZIexTV1CCV+9BjXMVCLth7DH7K3EztQsvyJtr90wrfYs+4Vd
 =4WOJ
 -----END PGP SIGNATURE-----

Merge tag 'v4.11-rockchip-clk1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into clk-next

Pull Rockchip clk updates from Heiko Stuebner:

A new clock-type for the 1-2 muxes per soc that are for whatever reason
controlled through the General Register Files, support for the rk3328
clock-controller (including a new pll-type) and the usual clock ids and
some fixes.

* tag 'v4.11-rockchip-clk1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  dt-bindings: clk: add rockchip,grf property for RK3399
  clk: rockchip: use clock ids for memory controller parts on rk3066/rk3188
  clk: rockchip: use rk3288 isp_in clock ids
  clk: rockchip: add clock ids for memory controller parts on rk3066/rk3188
  clk: rockchip: add rk3288 isp_in clock ids
  clk: rockchip: Remove useless init of "grf" to -EPROBE_DEFER
  clk: rockchip: add clock controller for rk3328
  dt-bindings: add bindings for rk3328 clock controller
  clk: rockchip: add dt-binding header for rk3328
  clk: rockchip: add new pll-type for rk3328
  clk: rockchip: describe aclk_vcodec using the new muxgrf type on rk3288
  clk: rockchip: add a clock-type for muxes based in the grf
2017-01-20 15:51:55 -08:00
Stephen Boyd
d07ed23f4c clk/samsung updates for v4.11:
- addition of the CPU clock configuration data for Exynos4412
    Prime SoC variant,
  - removal of driver for deprecated Exynos4415 SoC,
  - switching from the syscore to regular system sleep PM ops
    in the audio subsystem clocks controller driver,
  - updates of the definitions of some "Network On Chip" related
    clocks.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABCAAGBQJYgPcFAAoJEE1bIKeAnHqLt9EP/0e5ljfUQRiczFvPVfUZeZb0
 cn3HZrLBk+aDxDIBKpWSSUY0RraK6hjZYpwizRQyYBH7XFQY4aWxk2mtg+B5mPBT
 OH02tjrFeQ+BG13BzYbMKg86jFrDqQEjlpMU6PHrILrQoRqoNBomlJXpC8Jw5Oqb
 c79QxCsX8f94cbTgE3FHlF2ZHr8Wo4FKP2eWkdVBty1XvRvvZ1qE9IX6/wsqn1o7
 WCoJpKq7UjX1U9gBeHZzFRgzpKjsSoSha7yW/CkxP6b0TksQUmGi81asFxdslqi3
 xiK0PlsXB2R7TKNLNhU4hGcV7lvQFJaPOdWshvnQ7nFz9dlFjZkSGUTvLGYLH2+j
 43nHnHqEP6avNYo5cBR27Wc2ZaARMXq7AMJvZHC2/DuhtaO70wKfFVib1nFe40pX
 UBP5dxOy7C2taRxSr3QSmviuBwZYBmDWioE3SQE/IdM6z3WpN37kNrNw1OrMctji
 MFCyIfeKlUpLJVZRcdKKxvem0QTPN5/cWote5ibNO+x0O9RWkXSrdBtnoioc5oL7
 30TtZlGbKG9VsRRjxYhuul/lpTZvyewg5PP9T5xGmeXOF69SlPuZwOu26D3E2Lej
 AiTMellqH7vjX2uNSQ4lQExzOj8psJ0Mq7hj5lRavsPn8m50PAHMfq+YHncii32I
 E1HZF4sh7MYozX/2Els3
 =mSQz
 -----END PGP SIGNATURE-----

Merge tag 'clk-v4.11-samsung' of git://linuxtv.org/snawrocki/samsung into clk-next

Pull Samsung clk updates from Sylwester Nawrocki:

 - addition of the CPU clock configuration data for Exynos4412
   Prime SoC variant,
 - removal of driver for deprecated Exynos4415 SoC,
 - switching from the syscore to regular system sleep PM ops
   in the audio subsystem clocks controller driver,
 - updates of the definitions of some "Network On Chip" related
   clocks.

* tag 'clk-v4.11-samsung' of git://linuxtv.org/snawrocki/samsung:
  clk: samsung: Remove Exynos4415 driver (SoC not supported anymore)
  clk: samsung: exynos-audss: Replace syscore PM with platform device PM
  clk: samsung: exynos5433: Set NoC (Network On Chip) clocks as critical
  clk: samsung: Add CPU clk configuration data for Exynos4412 Prime
2017-01-20 15:49:47 -08:00
Icenowy Zheng
d0f11d14b0 clk: sunxi-ng: add support for V3s CCU
V3s has a similar but cut-down CCU to H3. Some muxes, especially clocks
about CSI, are different, which makes it to need a new CCU driver.

Add such a new driver for it.

Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-01-20 21:39:03 +01:00
Alexandre TORGUE
232aa35e1b Merge commit 'f8b5036361412a27c07a4ac9c3a4b80678cbd1e1' into stm32-dt-for-v4.11 2017-01-20 14:48:23 +01:00
Neil Armstrong
5a582cff47 clk: meson-gxbb: Export HDMI clocks
Export HDMI clock from internal to dt-bindings.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2017-01-18 10:17:53 -08:00
Olof Johansson
c2b360449e STM32 DT updates for v4.11, round 1.
Highlights:
 ----------
 
  - ADD RTC support on STM32F429 MCU
  - Enable RTC on STM32F469and STM32F429 boards
  - ADD ADC support on STM32F429 MCU
  - Enable ADC on STM32F429 Eval board
  - Add I2S external clock
  - Fix memory size for STM32F429 Disco
 
 Note:
 -----
 First patch "clk: stm32f4: Update DT bindings documentation")
 has already been merged in clock tree.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJYfOhfAAoJEH+ayWryHnCFyy0P/2b8H+73DHY/Cbo1c3N5zGYT
 oMYyOX1pwDbMqdOvJBcaP4+H3Ho/3uCPZDv/jhfXU4nVUQT2U3xnYOx89mRowRRd
 n+HOVFm5wIJUGFtvwLgl8uGf7eFn/gI3UM63iGkH2dmV2EB+GDt8RyxFKV0jZdEJ
 qKLPUbBkIqMOcWoHYb9XYEqOiqBSd3cR1MJuUkDGOTz5rVmKUdcRJjJtgAETXqXH
 /sDAhXfQ1bOqAmGWVwiZ/+2spsImTM8orBzTo6feqBr7lKXfgtD4tBzI7GCJXNad
 nUvUFwuQ65arwzC+2rVVpReaIgn5O+k2lO1+dWCx3ffBbDS33yYlzDv6bcuVgvP9
 SYa7CyOm9W6ki6PO5omxcEuNNQkAZvji+RN6T8KeRZCiu12qa9JI2bcZ1FO063On
 zsvJUjbP0IFjqaTJPlnSyzSvJyNRcToi358pPTtlunAkXvDGRU8/dxyTULcOLJ/z
 6sHb6dD2VthT7BaWSh8pRH6p4O7JYPk6UhBUE+NHR8A4wJQwy828I9WqStHGK35R
 Qxsbd2KwfsGCqt2ZdMa/nMm/Rba60gTLd/XGAbqHQFl/pNYenxdMcY+4kPT+CFxK
 10Uih+1H5KYG6meB8Eg2rcjAsJzJJjGOHPFVW/eiJcaS0olE8to5IhAEJyUCgzbI
 t8s/93C1KjYpsJ8iwy2x
 =Xll3
 -----END PGP SIGNATURE-----

Merge tag 'stm32-dt-for-v4.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into next/dt

STM32 DT updates for v4.11, round 1.

Highlights:
----------

 - ADD RTC support on STM32F429 MCU
 - Enable RTC on STM32F469and STM32F429 boards
 - ADD ADC support on STM32F429 MCU
 - Enable ADC on STM32F429 Eval board
 - Add I2S external clock
 - Fix memory size for STM32F429 Disco

Note:
-----
First patch "clk: stm32f4: Update DT bindings documentation")
has already been merged in clock tree.

* tag 'stm32-dt-for-v4.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32:
  ARM: dts: stm32: enable RTC on stm32429i-eval
  ARM: dts: stm32: enable RTC on stm32f469-disco
  ARM: dts: stm32: enable RTC on stm32f429-disco
  ARM: dts: stm32: Add RTC support for STM32F429 MCU
  ARM: dts: stm32: set HSE_RTC clock frequency to 1 MHz on stm32f429
  ARM: dts: stm32: Include auxiliary stm32fx clock definition
  ARM: dts: stm32: Add external I2S clock on stm32f429 MCU
  ARM: dts: stm32: enable ADC on stm32f429i-eval board
  ARM: dts: stm32: Add ADC support to stm32f429
  ARM: dts: stm32: Add missing USART3 pin config to stm32f469-disco board
  ARM: dts: stm32: Fix memory size from 8MB to 16MB on stm32f469-disco board
  clk: stm32f4: Update DT bindings documentation

Signed-off-by: Olof Johansson <olof@lixom.net>
2017-01-16 22:47:51 -08:00
Olof Johansson
127e0ee0e5 Samsung DeviceTree ARM64 update for v4.11:
1. Add bus frequency and voltage scalling on Exynos5433 TM2 device (along with
    necessary bus nodes and Platform Performance Monitoring Unit on Exynos5433).
 2. Use macros for pinctrl settings on Exynos5433.
    This contains necessary header with bindings.
 3. Minor cleanups in Exynos5433 DTSI and boards using it.
 4. Create common DTSI betweem Exynos5433 TM2E and TM2E.
 5. Add HDMI/TV to Exynos5433 TM2.
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABCAAGBQJYeO01AAoJEME3ZuaGi4PXX7QP/0wlZmoUeBiAGuVDsOUqS5jT
 FQd+lC4r1croSn8oFMKx6Ta8LxwI8XjmuCOvRjBxBtNxzq4wTCABlVOexWjAHCMz
 KhYWcTBGIj+8Nk6BkBg8ga5iQAqQY6JhKKRBg0xbe8XqlkMThapJ3C90A4oWTeqm
 D9SERXJzeJiBr2dqVORxt3d/XtLXXKEw+3/qK9iOu4uAZE7NECUD1EIOM6gGXkLM
 55hOw7Qzh7g4L9umqVCj37gNK5nu4HLvvVA0FasMi6CL+EuHs5im9NOP3naN152f
 /W4xPRS6hVYzvueWHILBmaxNbwYMthJ34gXIdMg4td/nO/nVRMCplnsjbm+1rQDQ
 UoasRanobu+s+5nzRGybkM5Ni8QHZ/CsXK8DtSSlPC3tPMs5GywGIEfXqHqJzabs
 WlmhD68LWFzh2Og8X2KzB+5Pkmvp3HuUVLqPtsPpjnHQOFDrbWTjH3tCSpF/oCZV
 eWBrWoYZq4ZvzmiHWPrUsOuw0E1qpGg+QY169+/X8+4NBDglCGVN+d6Z83fb1qEA
 Kcej1kdCvg47xg4l9x+OamlVBkspnG/n/uDX4zkv5Vo0VOmU6kfpA2/zI9UW2UMB
 4rmol7Zw+MW8e5o49dgO9q1bEO2EqJj/7tVTVlhAYy8IS8G8i/FUK5zd2FKoqpzj
 z1hky4Wc1Lof9sIiQfKY
 =reZn
 -----END PGP SIGNATURE-----

Merge tag 'samsung-dt64-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/dt64

Samsung DeviceTree ARM64 update for v4.11:
1. Add bus frequency and voltage scalling on Exynos5433 TM2 device (along with
   necessary bus nodes and Platform Performance Monitoring Unit on Exynos5433).
2. Use macros for pinctrl settings on Exynos5433.
   This contains necessary header with bindings.
3. Minor cleanups in Exynos5433 DTSI and boards using it.
4. Create common DTSI betweem Exynos5433 TM2E and TM2E.
5. Add HDMI/TV to Exynos5433 TM2.

* tag 'samsung-dt64-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  arm64: dts: exynos: Enable HDMI/TV path on Exynos5433-TM2
  arm64: dts: exynos: Add HDMI node to Exynos5433
  arm64: dts: exynos: Add DECON_TV node to Exynos5433
  arm64: dts: exynos: Fix addresses in node names on Exynos5433
  arm64: dts: exynos: Make TM2 and TM2E independent from each other
  arm64: dts: exynos: Fix wrong values for ldo23 and ldo25 on TM2/TM2E
  arm64: dts: exynos: Remove unsupported regulator-always-off property from TM2E
  arm64: dts: exynos: Comply to the samsung pinctrl naming convention in TM2
  arm64: dts: exynos: Use macros for pinctrl configuration on Exynos5433
  pinctrl: dt-bindings: samsung: add drive strength macros for Exynos5433
  arm64: dts: exynos: Add support of bus frequency using VDD_INT on Exynos5433 TM2
  arm64: dts: exynos: Add bus nodes using VDD_INT for Exynos5433
  arm64: dts: exynos: Add PPMU node to Exynos5433

Signed-off-by: Olof Johansson <olof@lixom.net>
2017-01-16 22:31:07 -08:00
Krzysztof Kozlowski
cb4ac949ea clk: samsung: Remove Exynos4415 driver (SoC not supported anymore)
Support for Exynos4415 is going away because there are no internal nor
external users.

Since commit 46dcf0ff0d ("ARM: dts: exynos: Remove exynos4415.dtsi"),
the platform cannot be instantiated so remove also the drivers.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Kukjin Kim <kgene@kernel.org>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
2017-01-16 11:33:38 +01:00
Heiko Stuebner
4688708271 clk: rockchip: add clock ids for memory controller parts on rk3066/rk3188
Add clock ids for the upctl and publ controllers used for ddr control.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2017-01-13 17:10:02 +01:00
Jacob Chen
6547653050 clk: rockchip: add rk3288 isp_in clock ids
Add clock-ids for the isp block of the rk3288.

Signed-off-by: Jacob Chen <jacob-chen@iotwrt.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2017-01-13 16:42:16 +01:00
Baoyou Xie
eea1d99b90 soc: zte: Add header for PM domains specifiers
This patch adds header with values used for ZTE 2967
SoC's power domain driver.

Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-01-11 16:21:06 +08:00
Gabriel Fernandez
be20fe159d clk: stm32f4: Update DT bindings documentation
Creation of dt include file for specific stm32f4 clocks.
These specific clocks are not derived from system clock (SYSCLOCK)
We should use index 1 to use these clocks in DT.
e.g. <&rcc 1 CLK_LSI>

Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
Acked-by: Rob Herring <robh@kernel.org>
2017-01-10 11:40:40 +01:00
Zoran Markovic
8e18d06589 clk: mdm9615: Add EBI2 clock
Add definition of EBI2 clock used by MDM9615 NAND controller.

Cc: Andy Gross <andy.gross@linaro.org>
Cc: David Brown <david.brown@linaro.org>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: linux-arm-msm@vger.kernel.org
Cc: linux-soc@vger.kernel.org
Cc: linux-clk@vger.kernel.org
Cc: devicetree@vger.kernel.org
Signed-off-by: Zoran Markovic <zmarkovic@sierrawireless.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
[sboyd@codeaurora.org: ebi2_clk halt bit is 24 not 23]
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-01-09 16:33:26 -08:00
Stephen Boyd
a2d6ef3a23 Merge branch 'clk-hi3660' into clk-next
* clk-hi3660:
  clk: hisilicon: Add clock driver for hi3660 SoC
  dt-bindings: Document the hi3660 clock bindings
2017-01-09 16:26:30 -08:00
Zhangfei Gao
d374e6fd50 clk: hisilicon: Add clock driver for hi3660 SoC
Add clock drivers for hi3660 SoC, this driver controls the SoC
registers to supply different clocks to different IPs in the SoC.

Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>
[sboyd@codeaurora.org: Simplify probe with function pointer]
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-01-09 16:20:38 -08:00
Avaneesh Kumar Dwivedi
4263499a6e clk: qcom: Add GCC_MSS_RESET support
Add support to use reset control framework for resetting MSS
with hexagon v56 1.5.0.

Signed-off-by: Avaneesh Kumar Dwivedi <akdwived@codeaurora.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-01-09 16:06:43 -08:00
Stephen Boyd
2df2b82b7e Merge branches 'clk-qcom-rpm8974', 'clk-stm32f4', 'clk-ipq4019' and 'clk-fixes' into clk-next
* clk-qcom-rpm8974:
  clk: qcom: smd-rpmcc: Add msm8974 clocks

* clk-stm32f4:
  clk: stm32f4: SDIO & 48Mhz clock management for STM32F469 board
  clk: stm32f4: Add SAI clocks
  clk: stm32f4: Add I2S clock
  clk: stm32f4: Add lcd-tft clock
  clk: stm32f4: Add post divisor for I2S & SAI PLLs
  clk: stm32f4: Add PLL_I2S & PLL_SAI for STM32F429/469 boards
  clk: stm32f4: Update DT bindings documentation

* clk-ipq4019:
  clk: qcom: ipq4019: Add the cpu clock frequency change notifier
  clk: qcom: ipq4019: Add all the frequencies for apss cpu
  clk: qcom: ipq4019: correct sdcc frequency and parent name
  clk: qcom: ipq4019: Add the nodes for pcnoc
  clk: qcom: ipq4019: Add the apss cpu pll divider clock node
  clk: qcom: ipq4019: remove fixed clocks and add pll clocks

* clk-fixes:
  clk: stm32f4: Use CLK_OF_DECLARE_DRIVER initialization method
  clk: renesas: mstp: Support 8-bit registers for r7s72100
2017-01-09 16:06:11 -08:00
Tony Lindgren
d97556c801 ARM: dts: Fix omap3 off mode pull defines
We need to also have OFFPULLUDENABLE bit set to use the off mode pull values.
Otherwise the line is pulled down internally if no external pull exists.

This is has some documentation at:

http://processors.wiki.ti.com/index.php/Optimizing_OMAP35x_and_AM/DM37x_OFF_mode_PAD_configuration

Note that the value is still glitchy during off mode transitions as documented
in spz319f.pdf "Advisory 1.45". It's best to use external pulls instead of
relying on the internal ones for off mode and even then anything pulled up
will get driven down momentarily on off mode restore for GPIO banks other
than bank1.

Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-01-06 08:54:11 -08:00
Andi Shyti
eba7e6c6e5 pinctrl: dt-bindings: samsung: add drive strength macros for Exynos5433
Commit 5db7e3bb87 ("pinctrl: dt-bindings: samsung: Add header with
values used for configuration") has added a header file for defining the
pinctrl values in order to avoid hardcoded settings in the Exynos
DTS related files.

Extend samsung.h to the Exynos5433 for drive strength values
which are strictly related to the particular SoC and may defer
from others.

Signed-off-by: Andi Shyti <andi.shyti@samsung.com>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2017-01-06 08:51:06 +02:00
Elaine Zhang
9540480b71 dt-bindings: power: add RK3328 SoCs header for idle-request
According to a description from TRM, add all the idle request.

Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2017-01-05 14:31:24 +01:00
Elaine Zhang
6cc1aef0ad clk: rockchip: add dt-binding header for rk3328
Add the dt-bindings header for the rk3328, that gets shared between
the clock controller and the clock references in the dts.
Add softreset ID for rk3328.

Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2017-01-05 13:06:03 +01:00
Milo Kim
be53e38f0d dt-bindings: mfd: Remove TPS65217 interrupts
Interrupt numbers are from the datasheet, so no need to keep them in
the ABI. Use the number in the DT file.

Signed-off-by: Milo Kim <woogyom.kim@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-12-27 10:06:00 -08:00
Gabriel Fernandez
f8b5036361 clk: stm32f4: Update DT bindings documentation
Creation of dt include file for specific stm32f4 clocks.
These specific clocks are not derived from system clock (SYSCLOCK)
We should use index 1 to use these clocks in DT.
e.g. <&rcc 1 CLK_LSI>

Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-12-21 16:06:48 -08:00
Bjorn Andersson
685dc94b7d clk: qcom: smd-rpmcc: Add msm8974 clocks
This adds all RPM based clocks for msm8974, except cxo and
gfx3d_clk_src.

Tested-by: Georgi Djakov <georgi.djakov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-12-21 16:04:35 -08:00
Abhishek Sahu
5c1a96935f clk: qcom: ipq4019: Add the nodes for pcnoc
The current ipq4019 clock driver does not have the node for
PCNOC so this patch adds and registers the PCNOC clock nodes.
This PCNOC clock is critical and should not be turned off so
setting CRITICAL flag also.

Signed-off-by: Abhishek Sahu <absahu@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-12-21 15:57:27 -08:00
Abhishek Sahu
d83dcacea1 clk: qcom: ipq4019: Add the apss cpu pll divider clock node
The current ipq4019 clock driver does not have support for all
the frequency supported by APSS CPU. APSS CPU frequency is
provided with APSS CPU PLL divider which divides down the VCO
frequency. This divider is nonlinear and specific to IPQ4019
so the standard divider code cannot be used for this.

Signed-off-by: Abhishek Sahu <absahu@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-12-21 15:57:26 -08:00
Abhishek Sahu
4577aa01a5 clk: qcom: ipq4019: remove fixed clocks and add pll clocks
The current ipq4019 clock driver registered the PLL clocks and
dividers as fixed clock. These fixed clock needs to be removed
from driver probe function and same need to be registered with
clock framework. These PLL clocks should be programmed only
once and the same are being programmed already by the boot
loader so the set rate operation is not required for these
clocks. Only the rate can be calculated by clock operations
in clock driver file so this patch adds the same.

The PLL takes the reference clock from XO and generates the
intermediate VCO frequency. This VCO frequency will be divided
down by different PLL internal dividers. Some of the PLL
internal dividers are fixed while other are programmable.

Signed-off-by: Abhishek Sahu <absahu@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-12-21 15:57:25 -08:00
jbrunet
308d3165d8 dt: bindings: net: use boolean dt properties for eee broken modes
The patches regarding eee-broken-modes was merged before all people
involved could find an agreement on the best way to move forward.

While we agreed on having a DT property to mark particular modes as broken,
the value used for eee-broken-modes mapped the phy register in very direct
way. Because of this, the concern is that it could be used to implement
configuration policies instead of describing a broken HW.

In the end, having a boolean property for each mode seems to be preferred
over one bit field value mapping the register (too) directly.

Cc: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-20 13:50:50 -05:00
Linus Torvalds
991688bfc6 ARM: SoC driver updates for v4.10
Driver updates for ARM SoCs, including a couple of newly added drivers:
 
 - A new driver for the power management controller on TI Keystone
 - Support for the prerelease "SCPI" firmware protocol that ended up
   being shipped by Amlogic in their GXBB SoC.
 - A soc_device can now be matched using a glob from inside the
   kernel, when another driver wants to know the specific chip
   it is running on and cannot find out from DT, firmware or hardware.
 - Renesas SoCs now support identification through the soc_device
   interface, both in user space and kernel.
 - Renesas r8a7743 and r8a7745 gain support for their system controller
 - A new checking module for the ARM "PSCI" (not to be confused
   with "SCPI" mentioned above) firmware interface.
 - A new driver for the Tegra GMI memory interface
 - Support for the Tegra firmware interfaces with their
   power management controllers
 
 As usual, the updates for the reset controller framework are merged
 here, as they tend to touch multiple SoCs as well, including a new
 driver for the Oxford (now Broadcom) OX820 chip and the Tegra
 bpmp interface.
 
 The existing drivers for Atmel, Qualcomm, NVIDIA, TI Davinci, and
 Rockchips SoCs see some further updates.
 
 Conflicts:
 - ARCH_RENESAS now selects SOC_BUS, but no longer needs GPIOLIB
 - drivers/soc/renesas/Makefile: multiple files got added, keep
   all in logical sorting
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIVAwUAWFMaGWCrR//JCVInAQLs5RAA3I1I8/R+pd5jfMaAB8Od3S4g8YSqIDjC
 EIOoDPx9GDV70+cGs4ea+L9bfGs3ePGivCtcbftNsLDAueQ2jKMa3ShqxA/MMbJE
 rWQi/ARaDFY0nHL8VPWq7XyYwwrah+/gKBr8UhkaKI0vy6DBqxyCknrS2kgF88rv
 DVs2wnRvDM7GVUax0JDzuySR7BXJIuUfS78jPMESASbTQktsZTFUyH+osiqHtptD
 M5bPC8rxOeZXljt3DOvXSdK9rVnji/A3nznY4r3tlt805eaOA7CzjVSsY27WQel0
 63uj+FgE+eM0sECIxpkNbH/HHq2V4QkUoy3fk0xPkzRbllBBpS+UieGamTnPJup8
 wf5uiH1IqLLLV9F/504S92fp0pgFPpOGYWZnBDlIbh3aGq4tMjIRqRYMTyCT02hN
 +b54v0SuImFiN6p8HMS1ugYQ+1m9TU40b5pZkzkTJbSQOMm6oi3j0A0orXU/TPKd
 FVMrlUyfh+yu+vs1hGWLs1+mBjFnxXzSc8yJeaCdX4MvCY5/aVJZ+cwq4Bk+1YU5
 9Qhkeo5JV/l9FlrjxomnEq3l/WV/pFmj7JRZsb1BM88m+5LYUf2lv11b5B4FvrTd
 yx8SSpe3+ofIijdNbJ8IywF6y0OXF6UnrlouOVdSIp+wPs+pibdU/5gQep16pvqd
 WW6sVWn6quA=
 =6dP8
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC driver updates from Arnd Bergmann:
 "Driver updates for ARM SoCs, including a couple of newly added
  drivers:

   - A new driver for the power management controller on TI Keystone

   - Support for the prerelease "SCPI" firmware protocol that ended up
     being shipped by Amlogic in their GXBB SoC.

   - A soc_device can now be matched using a glob from inside the
     kernel, when another driver wants to know the specific chip it is
     running on and cannot find out from DT, firmware or hardware.

   - Renesas SoCs now support identification through the soc_device
     interface, both in user space and kernel.

   - Renesas r8a7743 and r8a7745 gain support for their system
     controller

   - A new checking module for the ARM "PSCI" (not to be confused with
     "SCPI" mentioned above) firmware interface.

   - A new driver for the Tegra GMI memory interface

   - Support for the Tegra firmware interfaces with their power
     management controllers

  As usual, the updates for the reset controller framework are merged
  here, as they tend to touch multiple SoCs as well, including a new
  driver for the Oxford (now Broadcom) OX820 chip and the Tegra bpmp
  interface.

  The existing drivers for Atmel, Qualcomm, NVIDIA, TI Davinci, and
  Rockchips SoCs see some further updates"

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (76 commits)
  misc: sram: remove useless #ifdef
  drivers: psci: Allow PSCI node to be disabled
  drivers: psci: PSCI checker module
  soc: renesas: Identify SoC and register with the SoC bus
  firmware: qcom: scm: Return PTR_ERR when devm_clk_get fails
  firmware: qcom: scm: Remove core, iface and bus clocks dependency
  dt-bindings: firmware: scm: Add MSM8996 DT bindings
  memory: da8xx-ddrctl: drop the call to of_flat_dt_get_machine_name()
  bus: da8xx-mstpri: drop the call to of_flat_dt_get_machine_name()
  ARM: shmobile: Document DT bindings for Product Register
  soc: renesas: rcar-sysc: add R8A7745 support
  reset: Add Tegra BPMP reset driver
  dt-bindings: firmware: Allow child nodes inside the Tegra BPMP
  dt-bindings: Add power domains to Tegra BPMP firmware
  firmware: tegra: Add BPMP support
  firmware: tegra: Add IVC library
  dt-bindings: firmware: Add bindings for Tegra BPMP
  mailbox: tegra-hsp: Use after free in tegra_hsp_remove_doorbells()
  mailbox: Add Tegra HSP driver
  firmware: arm_scpi: add support for pre-v1.0 SCPI compatible
  ...
2016-12-15 16:03:25 -08:00
Linus Torvalds
786a72d791 ARM: DT updates for v4.10
Lots of changes as usual, so I'm trying to be brief here. Most of the
 new hardware support has the respective driver changes merged through
 other trees or has had it available for a while, so this is where things
 come together.
 
 We get a DT descriptions for a couple of new SoCs, all of them variants
 of other chips we already support, and usually coming with a new
 evaluation board:
 
 - Oxford semiconductor (now Broadcom) OX820 SoC for NAS devices
 - Qualcomm MDM9615 LTE baseband
 - NXP imx6ull, the latest and smallest i.MX6 application processor variant
 - Renesas RZ/G (r8a7743 and r8a7745) application processors
 - Rockchip PX3, a variant of the rk3188 chip used in Android tablets
 - Rockchip rk1108 single-core application processor
 - ST stm32f746 Cortex-M7 based microcontroller
 - TI DRA71x automotive processors
 
 These are commercially available consumer platforms we now support:
 - Motorola Droid 4 (xt894) mobile phone
 - Rikomagic MK808 Android TV stick based on Rockchips rx3066
 - Cloud Engines PogoPlug v3 based on OX820
 - Various Broadcom based wireless devices:
   - Netgear R8500 router
   - Tenda AC9 router
   - TP-LINK Archer C9 V1
   - Luxul XAP-1510 Access point
 - Turris Omnia open hardware router based on Armada 385
 
 And a couple of new boards targeted at developers, makers
 or industrial integration:
 - Macnica Sodia development platform for Altera socfpga (Cyclone V)
 - MicroZed board based on Xilinx Zynq FPGA platforms
 - TOPEET itop/elite based on exynos4412
 - WP8548 MangOH Open Hardware platform for IOT, based on
   Qualcomm MDM9615
 - NextThing CHIP Pro gadget
 - NanoPi M1 development board
 - AM571x-IDK industrial board based on TI AM5718
 - i.MX6SX UDOO Neo
 - Boundary Devices Nitrogen6_SOM2 (i.MX6)
 - Engicam i.CoreM6
 - Grinn i.MX6UL liteSOM/liteBoard
 - Toradex Colibri iMX6 module
 
 Other changes:
 - added peripherals on renesas, davinci, stm32f429, uniphier, sti,
   mediatek, integrator, at91, imx, vybrid, ls1021a, omap, qualcomm,
   mvebu, allwinner, broadcom, exynos, zynq
 
 - Continued fixes for W=1 dtc warnings
 
 - The old STiH415/416 SoC support gets removed, these never made it into
   products and have served their purpose in the kernel as a template
   for teh newer chips from ST
 
 - The exynos4415 dtsi file is removed as nothing uses it.
 
 - Intel PXA25x can now be booted using devicetree
 
 Conflicts:
 arch/arm/boot/dts/r8a*.dtsi: a node was added
 the clk tree, keep both sides and watch out for git
 dropping the required '};' at the end of each side.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIVAwUAWFMZHGCrR//JCVInAQKQ6A/+Og42qy1rhL3cfHiSsT7e5giQNVSFY7Cm
 Z06R83AEv6HDMTNzyiJr5udRGOhm40qIoe92fhVJSRF7F6o/GbCQ7YOyU4KdQELg
 caqRCe1Nq6RT0RYU0m6xVyv/ox0JTNEaB+TcvD1x4pgUQNo9sSBfiXpTzOKhLhqs
 zmsfpNpj8v188Iofoju3WtwN26riJ7P4QdYIaNaH4qNQgoQbMbQICDwnpSsNJY+x
 MSlNrbtYqfz6vc5fqa0mtfhF6wIFxuRnTgSLi9skWZ2l/fkn4ljF3RhN1Z86TYPv
 CYsqDu+DF0YNxFrht3BAK6WTe2PdCnMNLNnMhYC6NDQ8YG1tbwvXQFM1KVanRvxx
 hXP4Nt2sZYiqA4v8joFPgp9gnyBMdhtJEtWSmHwCY0RFObySJR4I1GY7igh02HUJ
 gxlmOYcmklzLiyXvfjdDvg0sCV1tBhaBKTLYxF7lVCzG2QaR22Le+p3o+SWm+e+V
 Ruc9l/iwHaeasNnbAkDEiEyi1FobtuEeTSZnKaXfKX8WuKVZLJrCEm7WiRIsj0Ww
 vJ9ABVft7PEv/Ov3fbKBWON4vxKTBBgHuEDcbIsp19w4BSH1WJf5bGXIm7QeA3Z9
 aD+DtA5W5ExIjMQR2+qgz/BBIzVVVVvG8DEcdcCtc3JGRJll5PadShLdqKjVIerc
 SpsxqCKoRCI=
 =wJt3
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM DT updates from Arnd Bergmann:
 "Lots of changes as usual, so I'm trying to be brief here. Most of the
  new hardware support has the respective driver changes merged through
  other trees or has had it available for a while, so this is where
  things come together.

  We get a DT descriptions for a couple of new SoCs, all of them
  variants of other chips we already support, and usually coming with a
  new evaluation board:

   - Oxford semiconductor (now Broadcom) OX820 SoC for NAS devices
   - Qualcomm MDM9615 LTE baseband
   - NXP imx6ull, the latest and smallest i.MX6 application processor variant
   - Renesas RZ/G (r8a7743 and r8a7745) application processors
   - Rockchip PX3, a variant of the rk3188 chip used in Android tablets
   - Rockchip rk1108 single-core application processor
   - ST stm32f746 Cortex-M7 based microcontroller
   - TI DRA71x automotive processors

  These are commercially available consumer platforms we now support:

   - Motorola Droid 4 (xt894) mobile phone
   - Rikomagic MK808 Android TV stick based on Rockchips rx3066
   - Cloud Engines PogoPlug v3 based on OX820
   - Various Broadcom based wireless devices:
      - Netgear R8500 router
      - Tenda AC9 router
      - TP-LINK Archer C9 V1
      - Luxul XAP-1510 Access point
   - Turris Omnia open hardware router based on Armada 385

  And a couple of new boards targeted at developers, makers or
  industrial integration:

   - Macnica Sodia development platform for Altera socfpga (Cyclone V)
   - MicroZed board based on Xilinx Zynq FPGA platforms
   - TOPEET itop/elite based on exynos4412
   - WP8548 MangOH Open Hardware platform for IOT, based on Qualcomm MDM9615
   - NextThing CHIP Pro gadget
   - NanoPi M1 development board
   - AM571x-IDK industrial board based on TI AM5718
   - i.MX6SX UDOO Neo
   - Boundary Devices Nitrogen6_SOM2 (i.MX6)
   - Engicam i.CoreM6
   - Grinn i.MX6UL liteSOM/liteBoard
   - Toradex Colibri iMX6 module

  Other changes:

   - added peripherals on renesas, davinci, stm32f429, uniphier, sti,
     mediatek, integrator, at91, imx, vybrid, ls1021a, omap, qualcomm,
     mvebu, allwinner, broadcom, exynos, zynq

   - Continued fixes for W=1 dtc warnings

   - The old STiH415/416 SoC support gets removed, these never made it
     into products and have served their purpose in the kernel as a
     template for teh newer chips from ST

   - The exynos4415 dtsi file is removed as nothing uses it.

   - Intel PXA25x can now be booted using devicetree"

* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (422 commits)
  arm: dts: zynq: Add MicroZed board support
  ARM: dts: da850: enable high speed for mmc
  ARM: dts: da850: Add node for pullup/pulldown pinconf
  ARM: dts: da850: enable memctrl and mstpri nodes per board
  ARM: dts: da850-lcdk: Add ethernet0 alias to DT
  ARM: dts: artpec: add pcie support
  ARM: dts: add support for Turris Omnia
  devicetree: Add vendor prefix for CZ.NIC
  ARM: dts: berlin2q-marvell-dmp: fix typo in chosen node
  ARM: dts: berlin2q-marvell-dmp: fix regulators' name
  ARM: dts: Add xo to sdhc clock node on qcom platforms
  ARM: dts: r8a7794: Add device node for PRR
  ARM: dts: r8a7793: Add device node for PRR
  ARM: dts: r8a7792: Add device node for PRR
  ARM: dts: r8a7791: Add device node for PRR
  ARM: dts: r8a7790: Add device node for PRR
  ARM: dts: r8a7779: Add device node for PRR
  ARM: dts: r8a73a4: Add device node for PRR
  ARM: dts: sk-rzg1e: add Ether support
  ARM: dts: sk-rzg1e: initial device tree
  ...
2016-12-15 15:50:24 -08:00
Linus Torvalds
ce38207f16 sound updates for 4.10-rc1
No dramatic changes are found in this development cycle, but as usual,
 many commits are applied in a wide range of drivers.
 
 Most of big changes are in ASoC, where a few bits of framework work
 and quite a lot of cleanups and improvements to existing code have
 been done.  The rest are usual stuff, a few HD-audio and USB-audio
 quirks and fixes, as well as the drop of kthread usages in the whole
 subsystem.
 
 Below are some highlights:
 
 ASoC:
 - Support for stereo DAPM controls
 - Some initial work on the of-graph sound card
 - regmap conversions of the remaining AC'97 drivers
 - A new version of the topology ABI; this should be backward compatible
 - Updates / cleanups of rsnd, sunxi, sti, nau8825, samsung, arizona,
   Intel skylake, atom-sst
 - New drivers for Cirrus Logic CS42L42, Qualcomm MSM8916-WCD, and
   Realtek RT5665
 
 USB-audio:
 - Yet another race fix at disconnection
 - Tolerated packet size calculation for some Android devices
 - Quirks for Axe-Fx II, QuickCam, TEAC 501/503
 
 HD-audio:
 - Improvement of Dell pin fixup mapping
 - Quirks for HP Z1 Gen3, Alienware 15 R2 2016 and ALC622 headset mic
 
 Misc:
 - Replace all kthread usages with simple works
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABAgAGBQJYUGNQAAoJEGwxgFQ9KSmkc3kP/jS5EDPWb6dwqdlZomT0lumR
 flpvLLo6TWTi9CS8MkC1hPHbR+3LGPMUL8Wwf2cVb06dvKpUHa5P3Wq6lMm6T9wO
 1ExhnHeDEDfGXop3/EuADmpRsfsV+z/PpWYmGB0vkoyPTg7e3xQRA6Im6p6IMi45
 pnvEaSe18oEidqzAxaBgBFTdoNyaD9zrPL5J9Jh0/JCZ/kSmY6hhI+hlTjjOKCR6
 fs4ge2WreonAKbhfOE61eE2KDnQA4II/2JUoPA42wZOat9ukb8DiErgHoFgsWTtE
 h+/ZN5Qj3dweP3+NIKsWrmfC6qzTt9OnUNPB2O0A+UYmAMQBjBz9KVxW1FHyTqBp
 ewATtvCNIQs+uPMaO/Q/Qo3ZkKLf/W7o/Dt2u/orSrnQ2plKgIOiHJodhXlTrOWm
 szF+qJq0xRB7+/dZa+gDjGPAjirr6n3Fv7wrJmqfyF0hLaIEy4wa2Rd/IAZ9Ar46
 5S4prL2Ba1CKf1YV27DR1bjUTAonlApfczNp+urCGQJCfZ0kQOAhZJQ/mbMOgSDS
 KEC0vY6NLr88b19OETS4oQZ0ixxIAm8hwAle6z39GGhGZ8JWH5+JRzy8emVh2bss
 lpFLFHLwK+a+JHxmnOniJW9AlC8I7hVqfS63qaTXfvDnMMcRd5fMgniZt8bTWc2/
 F5hsE83JUlcA8Owfyoca
 =WZeb
 -----END PGP SIGNATURE-----

Merge tag 'sound-4.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

Pull sound updates from Takashi Iwai:
 "No dramatic changes are found in this development cycle, but as usual,
  many commits are applied in a wide range of drivers.

  Most of big changes are in ASoC, where a few bits of framework work
  and quite a lot of cleanups and improvements to existing code have
  been done. The rest are usual stuff, a few HD-audio and USB-audio
  quirks and fixes, as well as the drop of kthread usages in the whole
  subsystem.

  Below are some highlights:

  ASoC:
   - support for stereo DAPM controls
   - some initial work on the of-graph sound card
   - regmap conversions of the remaining AC'97 drivers
   - a new version of the topology ABI; this should be backward
     compatible
   - updates / cleanups of rsnd, sunxi, sti, nau8825, samsung, arizona,
     Intel skylake, atom-sst
   - new drivers for Cirrus Logic CS42L42, Qualcomm MSM8916-WCD, and
     Realtek RT5665

  USB-audio:
   - yet another race fix at disconnection
   - tolerated packet size calculation for some Android devices
   - quirks for Axe-Fx II, QuickCam, TEAC 501/503

  HD-audio:
   - improvement of Dell pin fixup mapping
   - quirks for HP Z1 Gen3, Alienware 15 R2 2016 and ALC622 headset mic

  Misc:
   - replace all kthread usages with simple works"

* tag 'sound-4.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (296 commits)
  ALSA: hiface: Fix M2Tech hiFace driver sampling rate change
  ALSA: usb-audio: Eliminate noise at the start of DSD playback.
  ALSA: usb-audio: Add native DSD support for TEAC 501/503 DAC
  ASoC: wm_adsp: wm_adsp_buf_alloc should use kfree in error path
  ASoC: topology: avoid uninitialized kcontrol_type
  ALSA: usb-audio: Add QuickCam Communicate Deluxe/S7500 to volume_control_quirks
  ALSA: usb-audio: add implicit fb quirk for Axe-Fx II
  ASoC: zte: spdif: correct ZX_SPDIF_CLK_RAT define
  ASoC: zte: spdif and i2s drivers are not zx296702 specific
  ASoC: rsnd: setup BRGCKR/BRRA/BRRB when starting
  ASoC: rsnd: enable/disable ADG when suspend/resume timing
  ASoC: rsnd: tidyup ssi->usrcnt counter check in hw_params
  ALSA: cs46xx: add a new line
  ASoC: Intel: update bxt_da7219_max98357a to support quad ch dmic capture
  ASoC: nau8825: disable sinc filter for high THD of ADC
  ALSA: usb-audio: more tolerant packetsize
  ALSA: usb-audio: avoid setting of sample rate multiple times on bus
  ASoC: cs35l34: Simplify the logic to set CS35L34_MCLK_CTL setting
  ALSA: hda - Gate the mic jack on HP Z1 Gen3 AiO
  ALSA: hda: when comparing pin configurations, ignore assoc in addition to seq
  ...
2016-12-14 11:14:28 -08:00
Linus Torvalds
b8d2798f32 This is a fairly quiet release. We don't have any patches to the core
framework. The only patch that can even be considered "core" adds another
 clk_get() variant. The rest of the changes are in drivers for various SoCs, and
 we have a few bits for ARM shmobile architecture code (dts and mach) due to the
 dependency we're breaking between shmobile architecture code and its clk
 driver. Those shmobile bits have also been pulled into arm-soc tree. Here's the
 summary:
 
 Core:
 
  - Support for devm_get_clk_from_child() used with DT bindings that have
    subnodes with the 'clocks' property
 
 New Drivers:
 
  - Allwinner A64 (sun50i)
  - i.MX imx6ull
  - Socionext's UniPhier SoC CPUs
  - Mediatek MT2701 SoCs
  - Rockchip rk1108 SoCs
  - Qualcomm MSM8994/MSM8992 SoCS
  - Qualcomm RPM Clocks
  - Hisilicon Hi3516CV300 and Hi3798CV200 CRG
  - Oxford Semiconductor OX820 and OX810SE SoCs
  - Renesas RZ/G1M and RZ/GIE SoCs
  - Renesas R-Car RST driver for mode pin states
 
 Updates:
 
  - Four Allwinner SoCs are migrated to the new style clk driver
  - Rockchip rk3399,rk3066 PLL optimizations
  - i.MX LVDS display glitch fixes and AV PLL precision improvements
  - Qualcomm MSM8996 GPU GDSCs, hw controlled GDSCs, and Alpha PLL support
  - Explicit demodularization of always builtin drivers
  - Freescale Qoriq ls1012a and ls1046a support
  - Exynos 5433 parent typo fix and critical clock tagging
  - Renesas r8a7743/r8a7745 CPG
  - Renesas R-Car M3-W CSI2/VIN/SYS-DMAC/(H)SCIF/I2C/DRIF/gfx support
  - stm32f4* LSI, LSE, RTC, and QSPI clocks
  - pxa27x and pxa25x cpufreq as clks
  - TI omap36xx sprz319 advisory 2.1 workaround
  - Broadcom bcm2835 rate change propogation to PLLH_AUX from VEC
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABCAAGBQJYT1GXAAoJEK0CiJfG5JUlQ1QP/iOaWnE8TBLK/lOKPte2rw8U
 1rw2SDQ8gEJBGIVbZZsnOq6Pp1sVKrJ/7S9ybBeSHoOVb5iTCVAB4wG5uqdLLUGs
 4cHj4Vtge7xSxPLCh6YzawS0SjbtbYp1KXHBygGB2COIF53zphkmuM74gZ+l3dcz
 TMkfbIvwm8ISvNjc7tRpjhzf6+XUTIVRJ6UZPMnir08lTmDqHz7mouY7nUxlbWOy
 lOlF725RoBSa4LcBt+nZcNZ7Cu8eajFneeE87YiLdM4aS/VYm1Ajs9KzZYIRM3R6
 mznmiSDwCWTOzU4CsPSdcxGXePzyPrkDvRGWED2qHXNwWQ7Asbtm5pxDKEJ+rj8L
 LoB60z20d5PP0zJeiSwnr3XOgp95gW6vduAngu094O7FDZV7yY90wENIphQqgHaU
 5nVEPYWTK3lrxAShadpHvnyZI5A621QbNYzAoCAM/jf5xa3JW+AbkERmO/RyEsTO
 s6gAKX9H4WiQsEHrmBpJ+VsVVmlT5fhCtqskohaEqFg9CaVaxXvTPzN2fO9KtbDC
 M6JPycE9qgu08TWTyJr9xGDGBh0mKP+7ffxpj1x1gVT59HmCLAGTMEvMuHAfKCfW
 vz6qPjWW4KnqwAY0JvDZy1y37YQMytA5PVidV/XsEM7WLnmbutTCEbmwIx8eUNGv
 NaEpc4l2hvKLwCo4w0J+
 =RXZr
 -----END PGP SIGNATURE-----

Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk updates from Stephen Boyd:
 "This is a fairly quiet release. We don't have any patches to the core
  framework. The only patch that can even be considered "core" adds
  another clk_get() variant. The rest of the changes are in drivers for
  various SoCs, and we have a few bits for ARM shmobile architecture
  code (dts and mach) due to the dependency we're breaking between
  shmobile architecture code and its clk driver. Those shmobile bits
  have also been pulled into arm-soc tree. Here's the summary:

  Core:

   - Support for devm_get_clk_from_child() used with DT bindings that
     have subnodes with the 'clocks' property

  New Drivers:

   - Allwinner A64 (sun50i)
   - i.MX imx6ull
   - Socionext's UniPhier SoC CPUs
   - Mediatek MT2701 SoCs
   - Rockchip rk1108 SoCs
   - Qualcomm MSM8994/MSM8992 SoCS
   - Qualcomm RPM Clocks
   - Hisilicon Hi3516CV300 and Hi3798CV200 CRG
   - Oxford Semiconductor OX820 and OX810SE SoCs
   - Renesas RZ/G1M and RZ/GIE SoCs
   - Renesas R-Car RST driver for mode pin states

  Updates:

   - Four Allwinner SoCs are migrated to the new style clk driver
   - Rockchip rk3399,rk3066 PLL optimizations
   - i.MX LVDS display glitch fixes and AV PLL precision improvements
   - Qualcomm MSM8996 GPU GDSCs, hw controlled GDSCs, and Alpha PLL
     support
   - Explicit demodularization of always builtin drivers
   - Freescale Qoriq ls1012a and ls1046a support
   - Exynos 5433 parent typo fix and critical clock tagging
   - Renesas r8a7743/r8a7745 CPG
   - Renesas R-Car M3-W CSI2/VIN/SYS-DMAC/(H)SCIF/I2C/DRIF/gfx support
   - stm32f4* LSI, LSE, RTC, and QSPI clocks
   - pxa27x and pxa25x cpufreq as clks
   - TI omap36xx sprz319 advisory 2.1 workaround
   - Broadcom bcm2835 rate change propogation to PLLH_AUX from VEC"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (150 commits)
  clk: bcm: Fix 'maybe-uninitialized' warning in bcm2835_clock_choose_div_and_prate()
  clk: add devm_get_clk_from_child() API
  clk: st: clk-flexgen: Unmap region obtained by of_iomap
  clk: keystone: pll: Unmap region obtained by of_iomap
  clk:mmp:clk-of-mmp2: Free memory and Unmap region obtained by kzalloc and of_iomap
  clk:mmp:clk-of-pxa910: Free memory and Unmap region obtained by kzmalloc and of_iomap
  clk: mmp: clk-of-pxa1928: Free memory obtained by kzalloc
  clk: cdce925: Fix limit check
  clk: bcm: Make COMMON_CLK_IPROC into a library
  clk: qoriq: added ls1012a clock configuration
  clk: ti: dra7: fix "failed to lookup clock node gmac_gmii_ref_clk_div" boot message
  clk: bcm: Allow rate change propagation to PLLH_AUX on VEC clock
  clk: bcm: Support rate change propagation on bcm2835 clocks
  clk: bcm2835: Avoid overwriting the div info when disabling a pll_div clk
  clk: ti: omap36xx: Work around sprz319 advisory 2.1
  clk: clk-wm831x: fix a logic error
  clk: uniphier: add cpufreq data for LD11, LD20 SoCs
  clk: uniphier: add CPU-gear change (cpufreq) support
  clk: qcom: Put venus core0/1 gdscs to hw control mode
  clk: qcom: gdsc: Add support for gdscs with HW control
  ...
2016-12-13 08:54:27 -08:00
Linus Torvalds
20d5ba4928 Bulk pin control changes for the v4.10 kernel cycle:
No core changes this time. Mainly gradual improvement and
 feature growth in the drivers.
 
 New drivers:
 
 - New driver for TI DA850/OMAP-L138/AM18XX pinconf
 
 - The SX150x was moved over from the GPIO subsystem and
   reimagined as a pin control driver with GPIO support
   in a joint effort by three independent users of this
   hardware. The result was amazingly good!
 
 - New subdriver for the Oxnas OX820
 
 Improvements:
 
 - The sunxi driver now supports the generic pin control
   bindings rather than the sunxi-specific. Add debouncing
   support to the driver.
 
 - Simplifications in pinctrl-single adding a generic parser.
 
 - Two downstream fixes and move the Raspberry Pi BCM2835 over
   to use the generic GPIOLIB_IRQCHIP.
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJYTny8AAoJEEEQszewGV1zz0MP/2KLLiZtBaBo0hDfY2Oussjp
 JRO/VkjFIff/iDznkJJhMFPGwQ6ebp63vNRrwwOYwGa2GyZZrbeshul3oV89fyeL
 NYApweAFIOFnTI6TVb5k1cGoPJcck2OalSkwHNvPVEXYykf3xy6Jm0M81T9t8fsu
 xmSAfqvue9oYgDGN3jYVzsL9U6mGdWZV5fjFzwEfl/6oMA03/CMFdkDz6OBOj9ms
 addIx6fQEiS1XtIwEKnX6PS8Q78/vJ/Yl6IKow/5U5lTx5HR+nbECADdEM3jqper
 jifodSzJiN6fE3C55o9uupM8tVbu9lj18bb2UVOLiFB+IVlWYKekIzG+8Jg0YvJ7
 zEiLzXntNHGNM3Nvinf0AL42+Uz8Ar93AvhdZD2H4yqo6dA8ifojNnavuUa9piGR
 xlV8llwgSXZF8+b0ZodSFSS4R0zSGSXSimIlWDsdJ06UWHoJU2yijmkEJicXyS23
 Qlo+eK830F+e0FWHTEq+OsiFoCOrD3Zin3gfNtCKoLZpTf77YFOkF3aGMrrmoIRr
 MGahrssK+B6Hr8JzHWZDLpIEUL3VB+gHm6Vj4Tt5i2Ms7rw6hB60mu14PZ1pGlY0
 U9CFfYg9NSPqRrgkirlETI+l7rfvVHRxqgtMQSLE6uI1Nxw+6ubMRgB2uk92LQzv
 4F3H6v/5IBGqDRA5jr7a
 =Pkzu
 -----END PGP SIGNATURE-----

Merge tag 'pinctrl-v4.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

Pull pinctrl updates from Linus Walleij:
 "Bulk pin control changes for the v4.10 kernel cycle:

  No core changes this time. Mainly gradual improvement and
  feature growth in the drivers.

  New drivers:

   - New driver for TI DA850/OMAP-L138/AM18XX pinconf

   - The SX150x was moved over from the GPIO subsystem and reimagined as
     a pin control driver with GPIO support in a joint effort by three
     independent users of this hardware. The result was amazingly good!

   - New subdriver for the Oxnas OX820

  Improvements:

   - The sunxi driver now supports the generic pin control bindings
     rather than the sunxi-specific. Add debouncing support to the
     driver.

   - Simplifications in pinctrl-single adding a generic parser.

   - Two downstream fixes and move the Raspberry Pi BCM2835 over to use
     the generic GPIOLIB_IRQCHIP"

* tag 'pinctrl-v4.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (92 commits)
  pinctrl: sx150x: use new nested IRQ infrastructure
  pinctrl: sx150x: handle missing 'advanced' reg in sx1504 and sx1505
  pinctrl: sx150x: rename 'reg_advance' to 'reg_advanced'
  pinctrl: sx150x: access the correct bits in the 4-bit regs of sx150[147]
  pinctrl: mt8173: set GPIO16 to usb iddig mode
  pinctrl: bcm2835: switch to GPIOLIB_IRQCHIP
  pinctrl: New driver for TI DA850/OMAP-L138/AM18XX pinconf
  devicetree: bindings: pinctrl: Add binding for ti,da850-pupd
  Documentation: pinctrl: palmas: Add ti,palmas-powerhold-override property definition
  pinctrl: intel: set default handler to be handle_bad_irq()
  pinctrl: sx150x: add support for sx1501, sx1504, sx1505 and sx1507
  pinctrl: sx150x: sort chips by part number
  pinctrl: sx150x: use correct registers for reg_sense (sx1502 and sx1508)
  pinctrl: imx: fix imx_pinctrl_desc initialization
  pinctrl: sx150x: support setting multiple pins at once
  pinctrl: sx150x: various spelling fixes and some white-space cleanup
  pinctrl: mediatek: use builtin_platform_driver
  pinctrl: stm32: use builtin_platform_driver
  pinctrl: sunxi: Testing the wrong variable
  pinctrl: nomadik: split up and comments MC0 pins
  ...
2016-12-13 07:59:10 -08:00
Stephen Boyd
e3f4358e23 Merge tag 'v4.10-rockchip-clk2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into clk-next
Pull rockchip clk driver updates from Heiko Stuebner:

A new clock controller for the rk1108 soc (single-core Cortex-A7+DSP),
a fix making sure the cpuclk rate is actually valid, before trying to
set it and a copy-paste fix for the rk3399's testclk.

* tag 'v4.10-rockchip-clk2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  clk: rockchip: add clock controller for rk1108
  dt-bindings: add documentation for rk1108 cru
  clk: rockchip: add dt-binding header for rk1108
  clk: rockchip: fix copy-paste error in rk3399 testclk
  clk: rockchip: validity should be checked prior to cpu clock rate change
2016-12-06 15:17:26 -08:00
Arnd Bergmann
bb2d850778 A bit of attention for the rk3066, fixed tsadc reset node
as well as enabling the dma for uart and mmc controllers.
 
 And one new soc, the rk1108 combining a single-core Cortex-A7
 with a separate DSP core.
 -----BEGIN PGP SIGNATURE-----
 
 iQEtBAABCAAXBQJYNj8LEBxoZWlrb0BzbnRlY2guZGUACgkQ86Z5yZzRHYE3oggA
 j0b99/r3uGOavo9nun2yJTqq/bKhjAAupNhrEJtjKP9gdbR/1HOkjzRX/1g9ID36
 b5cMpOePpRN9xCg0IyK4/+0jgXJ1r41Fp1yEI51Z57jlo0WMzP10/E8hGwNQgW7Q
 QSAPrTZbwLcrDjq7cOHrF8WvuMnA+6ye77IcDFJ0ZjtU7PYwfO63VTIJ/37Ph3FE
 wlDb0YH57nrn13qUlK8UDJJysl1v2H8NP48/5qEfgF/swbyt6VKkaL2Q+Ua2aDys
 AaH2oTRUPBSPqqXj78OKrWfHB8U5WWfn7PvDYxyjYcnOnasvE7kEBlmw4P955QDM
 XzEEXkiEcQFMLoEiWim5Xw==
 =2VYn
 -----END PGP SIGNATURE-----

Merge tag 'v4.10-rockchip-dts32-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt

Pull "Rockchip dts32 changes for 4.10" from Heiko Stübner:

A bit of attention for the rk3066, fixed tsadc reset node
as well as enabling the dma for uart and mmc controllers.

And one new soc, the rk1108 combining a single-core Cortex-A7
with a separate DSP core.

* tag 'v4.10-rockchip-dts32-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  ARM: dts: rockchip: add the sdmmc pinctrl for rk1108
  ARM: dts: rockchip: add rockchip RK1108 Evaluation board
  ARM: dts: rockchip: add basic support for RK1108 SOC
  clk: rockchip: add dt-binding header for rk1108
  dt-bindings: rockchip-dw-mshc: add RK1108 dw-mshc description
  ARM: dts: rockchip: enable dma for uart and mmc on rk3066a
  ARM: dts: rockchip: fix TSADC reset node for rk3066a
2016-11-30 23:36:38 +01:00
Arnd Bergmann
bb986384d1 This pull request contains Broadcom ARM-based SoC Device Tree changes for 4.10,
please pull the following:
 
 - Rafal adds support for the Netgear R8500 routers, adds basic support
   for the Tenda AC9 router which uses the new BCM53573 SoC (single core Cortex
   A7). He also enables the UART on the Netgear R8000 and restructures the
   include files a bit for the BCM47094 SoC, finally he adds USB 3.0 PHY nodes
   which enables USB 3.0 on BCM5301X devices that support it. Finally he adds
   support for the TP-LINK Archer C9 V1 router.
 
 - Kamal adds support for the QSPI controller on the Northstar Plus SoCs and updates
   the bcm958625k reference board to have it enabled
 
 - Dan adds support for the Luxul XAP-1510 (using a BCM4708) and XWR-3100 (using
   a BCM47094)
 
 - Scott fixes the pinctrl names in the Cygnus DTS files
 
 - Jonathan enables the Broadcom iProc mailbox controller for Broadcom Cygnus/iProc
   SoCs, he adds interrupt support for the GPIO CRMU hardware block and finally adds
   the node for the OTP controller found on Cygnus SoCs
 
 - Dhananjay enables the GPIO B controller on Norstarh Plus SoCs
 
 - Eric defines standard pinctrl groups in the BCM2835 GPIO node
 
 - Gerd adds definitions for the pinctrl groups and updates the PWM, I2C and SDHCI nodes
   to use their appropriate pinctrl functions
 
 - Linus adds names for the Raspberry Pi GPIO lines based on the datasheet
 
 - Martin adds the DT binding and nodes for the Raspberry Pi firmware thermal block
 
 - Stefan fixes a few typos with respect to the BCM2835 mailbox binding example and
   Device Tree nodes he also fixes the Raspberry Pi GPIO lines names and finally
   adds names for the Raspberry Zero GPIO lines
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABCAAGBQJYM9VyAAoJEIfQlpxEBwcEK48QAKj7Z2kedtsVvlMm86SIrI+U
 g6diaTaeEnH2v+ClUShRg65wtTrwHaBEQFnimTtfPIK+8jOZnAOIWBcO0vdZBEkb
 2cibGKN9SWXubUBjr5BdAhWXjzLvuryldi19Qr2Q3XYXSUOKI+ba+PL0rfFBiL8o
 5CzkqJucr6xUCRI2sbVxmEOBrJDMs2iygSQvhDiUWTg/2aZWckLQ+e0W7wX5++sM
 t0wVkTi0ba7X+pUshQa2qiBVYess6RTdsLYwjdPqIZ4O5zMBFC8kMqjVP4uZuqUz
 ytg+MWOUU3/+vTUH+UOB75iV6NFfLMpxn0GGucivwBjKhaIefUEHfjpqHipCgarC
 MJ899MQsA97srBWmW56td9yQvB7/ce3NgzqqV6sUM7fvkxL00c6LiWE2Uuuo3x18
 L24u6hiZA0qsnX5aLqw0hcibZVlKDY3p5IE+Y85fBsR0y5OCx9a39rPWA/RRQ3pA
 U86gnt1jyjqNcjk6Z839Y0PutLb9wt48C+hDrRvBEjM5uWCCJbO6AZkoD0IT5H50
 fHZBir3V5+UHu+6MpUrym4AKvAoYJ6wc6Rpx7b3a5uS3Z/n4hugBFOguRMLrAvEc
 /Td6/aiLJq9uruaQR7mehlRDvSsMr1vr7ji8FHOIs5cX17d03A5qTLQWUFO+St7b
 sgb9D1Orm2nXN0RsebKq
 =4GFQ
 -----END PGP SIGNATURE-----

Merge tag 'arm-soc/for-4.10/devicetree' of http://github.com/Broadcom/stblinux into next/dt

Pull "Broadcom devicetree changes for 4.10" from Florian Fainelli:

This pull request contains Broadcom ARM-based SoC Device Tree changes for 4.10,
please pull the following:

- Rafal adds support for the Netgear R8500 routers, adds basic support
  for the Tenda AC9 router which uses the new BCM53573 SoC (single core Cortex
  A7). He also enables the UART on the Netgear R8000 and restructures the
  include files a bit for the BCM47094 SoC, finally he adds USB 3.0 PHY nodes
  which enables USB 3.0 on BCM5301X devices that support it. Finally he adds
  support for the TP-LINK Archer C9 V1 router.

- Kamal adds support for the QSPI controller on the Northstar Plus SoCs and updates
  the bcm958625k reference board to have it enabled

- Dan adds support for the Luxul XAP-1510 (using a BCM4708) and XWR-3100 (using
  a BCM47094)

- Scott fixes the pinctrl names in the Cygnus DTS files

- Jonathan enables the Broadcom iProc mailbox controller for Broadcom Cygnus/iProc
  SoCs, he adds interrupt support for the GPIO CRMU hardware block and finally adds
  the node for the OTP controller found on Cygnus SoCs

- Dhananjay enables the GPIO B controller on Norstarh Plus SoCs

- Eric defines standard pinctrl groups in the BCM2835 GPIO node

- Gerd adds definitions for the pinctrl groups and updates the PWM, I2C and SDHCI nodes
  to use their appropriate pinctrl functions

- Linus adds names for the Raspberry Pi GPIO lines based on the datasheet

- Martin adds the DT binding and nodes for the Raspberry Pi firmware thermal block

- Stefan fixes a few typos with respect to the BCM2835 mailbox binding example and
  Device Tree nodes he also fixes the Raspberry Pi GPIO lines names and finally
  adds names for the Raspberry Zero GPIO lines

* tag 'arm-soc/for-4.10/devicetree' of http://github.com/Broadcom/stblinux: (29 commits)
  ARM: bcm2835: Add names for the RPi Zero GPIO lines
  ARM: bcm2835: Fix names for the Raspberry Pi GPIO lines
  ARM: dts: enable GPIO-b for Broadcom NSP
  ARM: BCM5301X: Add DT for TP-LINK Archer C9 V1
  ARM: dts: Add node for Broadcom OTP controller driver
  ARM: dts: Enable interrupt support for cygnus crmu gpio driver
  ARM: dts: Enable Broadcom iProc mailbox controller
  ARM: bcm2835: Add names for the Raspberry Pi GPIO lines
  ARM: bcm2835: dts: add thermal node to device-tree of bcm283x
  dt: bindings: add thermal device driver for bcm2835
  ARM: dts: bcm283x: fix typo in mailbox address
  DT: binding: bcm2835-mbox: fix address typo in example
  ARM: dts: cygnus: fix naming of pinctrl node
  ARM: BCM53573: Specify PMU and its ILP clock in the DT
  ARM: BCM5301X: Add DT for Luxul XWR-3100
  ARM: BCM5301X: Add DT for Luxul XAP-1510
  ARM: BCM5301X: Specify USB 3.0 PHY in DT
  ARM: BCM5301X: Enable UART on Netgear R8000
  ARM: BCM5301X: Add separated DTS include file for BCM47094
  ARM: dts: NSP: Add QSPI nodes to NSPI and bcm958625k DTSes
  ...
2016-11-30 17:53:03 +01:00
Arnd Bergmann
9de194ff11 Second Round of Renesas ARM Based SoC DT Updates for v4.10
Enhancements:
 * Add device nodes for PRR
 * Add r8a7745 SoC and sk-rzg1e board
 * Add r8a7743 SoC and sk-rzg1m board
 * Enable SDR-104 and I2C demuxer on alt, koelsch and lager boards
 
 Corrections:
 * Use SYSC "always-on" PM Domain for sound on r8a7794 SoC
 * Correct hsusb parent clock on r8a7794 SoC
 * Correct PFC names for DU on alt board
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJYNfQEAAoJENfPZGlqN0++jt8P+gLdkKlX5TdEzg0U5IDBGd/U
 UQ0hCxx7aDUibsS9Pad+0R74QZj0M10Je0E+TFFQ8UDIh7jZ087K4/6wYDjFWemU
 sGi9gO2eNG8nEkJ2yfeXGQp4e4KeUCRvlrrdWM7hJAdw9jnuSu+h2TdfHxOLasXr
 7iB1GOQtjpaCL93Iv+R1dql/r+xAtCYvf5aKSTYcdlQ3fV2vsErbEkyYm/wUcUSZ
 3geFhsZJLSYAIs0ucZjysLPWNtyWwc4F7BwUxS8yfXXnHZhzzr7W3kjt/bxpul9N
 f+0vRp7pwXvRZbzZh1pGH2/h5kbu4vRl3+WBSSGGNqnaKyXsI5beB0PVV8RGnUdq
 qgt6fdCFbFQ9bAAoWijn9fOPXDqhN5ZQXlOJjUPSW6AtJ6JwdDXiPwxn9YYpfb//
 aGQCYt/bzFoJyyEBnQNQd7Ay8xHRxEv3JvFKb8oxNsWSI1cWuLfemW6kBYcnaH3n
 I9DRe5TorLqHxfQEmdz68rhDuf3D9QWSYcrd5tBee72mnQD5HGn+AEKsjkelD0zU
 vKTWBykwX/XWSw13rIkUoMyI3ajRH5tM6BrwnQWILwikix29Zj1CrDnux7mFK16D
 UWm9f8vqn+yO2Gz9WGfsS+YUtPIuPIMNjzB9ZbeT5eMu82nkBqsgXx8lmb8YQIpJ
 soCYf2YgU+4WGZF8Tlqi
 =YQDm
 -----END PGP SIGNATURE-----

Merge tag 'renesas-dt2-for-v4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt

Pull "Second Round of Renesas ARM Based SoC DT Updates for v4.10" from Simon Horman:

Enhancements:
* Add device nodes for PRR
* Add r8a7745 SoC and sk-rzg1e board
* Add r8a7743 SoC and sk-rzg1m board
* Enable SDR-104 and I2C demuxer on alt, koelsch and lager boards

Corrections:
* Use SYSC "always-on" PM Domain for sound on r8a7794 SoC
* Correct hsusb parent clock on r8a7794 SoC
* Correct PFC names for DU on alt board

* tag 'renesas-dt2-for-v4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (33 commits)
  ARM: dts: r8a7794: Add device node for PRR
  ARM: dts: r8a7793: Add device node for PRR
  ARM: dts: r8a7792: Add device node for PRR
  ARM: dts: r8a7791: Add device node for PRR
  ARM: dts: r8a7790: Add device node for PRR
  ARM: dts: r8a7779: Add device node for PRR
  ARM: dts: r8a73a4: Add device node for PRR
  ARM: dts: sk-rzg1e: add Ether support
  ARM: dts: sk-rzg1e: initial device tree
  ARM: dts: r8a7745: add IRQC support
  ARM: dts: r8a7745: add Ether support
  ARM: dts: r8a7745: add [H]SCIF{|A|B} support
  ARM: dts: r8a7745: add SYS-DMAC support
  ARM: dts: r8a7745: initial SoC device tree
  ARM: dts: sk-rzg1m: add Ether support
  ARM: dts: sk-rzg1m: initial device tree
  ARM: dts: r8a7743: add IRQC support
  ARM: dts: r8a7743: add Ether support
  ARM: dts: r8a7743: add [H]SCIF{A|B} support
  ARM: dts: r8a7743: add SYS-DMAC support
  ...
2016-11-30 16:44:12 +01:00
Arnd Bergmann
0b4160976f Renesas RZ/G1M and RZ/G1E CPG Core Clock Definitions
Shared by clock drivers, and DTS files.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJYNYmtAAoJEEgEtLw/Ve779vQP/RFZKsVt50YSFTZxE8cMhBen
 /ASy/PrcJmd+AbhkyP6fS4M4GkryNu4E2JdlRxu0bbAc7dyRcqCB/YlE7AWVnGVI
 9hlbROKxY+rWbZiYtTnqH4J6HoNheZn0U96GJSfNrwrncF8TNjjgUYfqPnqpcnUI
 L4ApF1XKGFeuOFVJviz2q5C2WKrqajMDmNyiuGSmuZLIE1QkVX3XuHZq1/D5hbix
 /MOkctrNlSkcfmFUBWiXpgY0uNli5QdRzzcqf6vpERxgPukTncixI6R5/pUB9TAp
 4GdFQcHDjTbjPf9sGsqg0wNHMf5Vg/sLcFt18ocWad/ooh2++U/n8/TwnZhXcxZW
 DCCbrWz6l8KoP0ay6BJyzVxLsaqqzlIjPqvVo24VvB8PUpTtpnEDhEQiMPIwBlgi
 HTgVnOzJQAzNAkCPot7i+esDd3tCZnm7ZFTT5GzYp3SdEASZ75ZyBZnfStFrgyCO
 CSNKcLAWA9n7bR6mkgoOyZ2+V5NJycuWnpIAtc1428nvP0vntFnliffwQ+CWRUvo
 vLxLMtsc3MrMl2DvHPG0992Jm2UzaMeYKW/RsPB67mV5+PC5F/e7vM0AU9Ko74aO
 oH1FvV7vBHWLUWNvAmWLhR/tmE9tt5pLTuAsoprBUJ+40sY/o9RLkWO/1sB9169e
 DC5y40qcVHeDWCK/WHkR
 =vTIK
 -----END PGP SIGNATURE-----

Merge tag 'rzg-clock-defs-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into next/dt

Pull "Renesas RZ/G1M and RZ/G1E CPG Core Clock Definitions" from Geert Uytterhoeven:

Shared by clock drivers, and DTS files.

* tag 'rzg-clock-defs-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers:
  clk: renesas: Add r8a7745 CPG Core Clock Definitions
  clk: renesas: Add r8a7743 CPG Core Clock Definitions
2016-11-30 16:43:10 +01:00
Arnd Bergmann
d319fc6dc1 Renesas ARM Based SoC r8a7745 SYSC Driver Updates for v4.10
* Add support for the r8a7745 SoC to rcar-sysc
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJYNfAfAAoJENfPZGlqN0++t14P/RukycPu2VgJ+F3G+OJoD2WS
 ltEYrhhZxIL9cjyLmiA7Mj7Ig9dMtzmiBC0W3HY5zvZN2OiOrzmNykfFdu9UN8rX
 iMZ6lDrq7o+Qsm1Q4Ab2miatqOqM7JPSacJPixLZFpvs6T79CCRMYaEeIB8AYD3O
 ij/tRDtxdvfY97iy5la9XvtA/63EmP6DZ2SxfqPXd6W0GaBg+QKBOLlcCR0yDrKh
 NosHdbiAbMapBSPbsnbhKLebpnPw159iu7VA73JbsrsFZ9IDRkwoA+wcgEEWnF8C
 b9S31TAglhL04AysUowlHjhEOU2hWPcF8rm3lisDghoUC6Rb/3gCPII+KnU6d5Z4
 QNCbY6IlWqya9wR3kavHmJHOowGt/LqrmLCnJSoTTbKgo6xPxN3kis6oRo2sY9w1
 KUJWgt9vfQ/H6ik2epkMg7sQbkBcsONUDUgVhFyaAqTKEgeIz5OggfNsYkQYYT37
 qlQkLgKweKYJmmr/ilCeVdmkdhPegII8aiYWdwb8N2cUY4I0nyUwnE+v9cdPRhxr
 LpONUZV+GtCz8O/Y2XtjxwhYoYUtHbUzSax+aw4qtBBmdyKcaQ1VIyn27gfofmht
 Q3itzk/eGp0GgnsadknYK9eOvWWjPf07/jvYgSVfL6rWGR+4/vcEht/kU+O9dnpP
 HMZ6/PrbmYoxWkY49sH7
 =pOb+
 -----END PGP SIGNATURE-----

Merge tag 'renesas-r8a7745-sysc-for-v4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/drivers

Pull "Renesas ARM Based SoC r8a7745 SYSC Driver Updates for v4.10" from Simon Horman:

* Add support for the r8a7745 SoC to rcar-sysc

* tag 'renesas-r8a7745-sysc-for-v4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  soc: renesas: rcar-sysc: add R8A7745 support
  ARM: shmobile: r8a7745: add power domain index macros

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2016-11-30 16:39:48 +01:00
jbrunet
1fc31357ad dt-bindings: net: add EEE capability constants
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Tested-by: Yegor Yefremov <yegorslists@googlemail.com>
Tested-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-29 19:38:31 -05:00
Simon Horman
028289536c Renesas RZ/G1M and RZ/G1E CPG Core Clock Definitions
Shared by clock drivers, and DTS files.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJYNYmtAAoJEEgEtLw/Ve779vQP/RFZKsVt50YSFTZxE8cMhBen
 /ASy/PrcJmd+AbhkyP6fS4M4GkryNu4E2JdlRxu0bbAc7dyRcqCB/YlE7AWVnGVI
 9hlbROKxY+rWbZiYtTnqH4J6HoNheZn0U96GJSfNrwrncF8TNjjgUYfqPnqpcnUI
 L4ApF1XKGFeuOFVJviz2q5C2WKrqajMDmNyiuGSmuZLIE1QkVX3XuHZq1/D5hbix
 /MOkctrNlSkcfmFUBWiXpgY0uNli5QdRzzcqf6vpERxgPukTncixI6R5/pUB9TAp
 4GdFQcHDjTbjPf9sGsqg0wNHMf5Vg/sLcFt18ocWad/ooh2++U/n8/TwnZhXcxZW
 DCCbrWz6l8KoP0ay6BJyzVxLsaqqzlIjPqvVo24VvB8PUpTtpnEDhEQiMPIwBlgi
 HTgVnOzJQAzNAkCPot7i+esDd3tCZnm7ZFTT5GzYp3SdEASZ75ZyBZnfStFrgyCO
 CSNKcLAWA9n7bR6mkgoOyZ2+V5NJycuWnpIAtc1428nvP0vntFnliffwQ+CWRUvo
 vLxLMtsc3MrMl2DvHPG0992Jm2UzaMeYKW/RsPB67mV5+PC5F/e7vM0AU9Ko74aO
 oH1FvV7vBHWLUWNvAmWLhR/tmE9tt5pLTuAsoprBUJ+40sY/o9RLkWO/1sB9169e
 DC5y40qcVHeDWCK/WHkR
 =vTIK
 -----END PGP SIGNATURE-----

Merge tag 'rzg-clock-defs-tag1'; commit '538321bd9718'; commit '97ca8402997c' into dt-for-v4.10

Renesas RZ/G1M and RZ/G1E CPG Core Clock Definitions

Shared by clock drivers, and DTS files.
2016-11-23 20:51:44 +01:00
Sergei Shtylyov
97ca840299 ARM: shmobile: r8a7745: add power domain index macros
Add macros usable by the device tree sources to reference R8A7745 SYSC power
domains by index.

Based on the original (and large) patch by Dmitry Shifrin
<dmitry.shifrin@cogentembedded.com>.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-11-23 14:06:21 +01:00
Olof Johansson
e40719dd01 firmware: Add Tegra IVC and BPMP support
IVC is an inter-processor communication protocol that uses shared memory
 to exchange data between processors. The BPMP driver makes use of this
 to communicate with the Boot and Power Management Processor (BPMP) and
 uses an additional hardware synchronization primitive from the HSP block
 to signal availability of new data (doorbell).
 
 Firmware running on the BPMP implements a number of services such as the
 control of clocks and resets within the system, or the ability to ungate
 or gate power partitions.
 -----BEGIN PGP SIGNATURE-----
 
 iQIwBAABCAAaBQJYLyVYExx0cmVkaW5nQG52aWRpYS5jb20ACgkQ3SOs138+s6F0
 bw//aunzLT9M38+PMRBYDhgY/ype3juarSMmDWT/25EpfJ6Eg862UYwFxpRwOi/z
 t5pTXfA6Ndwao6HhQp5UmqRAdZd2V0UcxJoJ+9vooAUutyJTkk4cd9tW1JBcTsyw
 LvqMplF6GXtDM/Qa2GGV+4N3zlastQGuv62ir9xHOBHs4MJAwcbr80N18k+WzuSE
 3OGRIjdsAReWVgcj+SL6XPKrF6PlKCWAe+nODmnnY8QkCb/icI1ryJtYEgT0PSkY
 Xw90udqaIuR80ZVRtgN3f3fQ6QBi7GTohFtDl05snBjPETF1aKFUX6w2JgUEXXdf
 +/eewfSy468SrkbppX2MbPxqDtEPLIjbjvNL/q/DdOXxjEnLnavn1BcFTvyiJ5Uo
 1u4B6uX+gW+xq8546XNNuCwmZ6zkDsRw3ksSWz3sMdpOtC72NAQ/YtAYu0+QUyUU
 vptXGK9LMoVzYtreayO37ql+MP8EFDYqsAIPLZzQ4PPCiZote0HN35IlVWZt+Koq
 jcMnU6EDZMA2mHINOLIzSbf39hw5zV6Skr0DW3PtPosf4vU488LHsRF5Fr11JBGi
 YAh/T8ZiEnv0qeBNk4irr3JEUuXCVDgxqwQB/FkGL/mKPV08djji3tMTl6fNetMk
 pH3fQB8yclKn3DRAIWSMrDDOGspOKSSmeu2/K4abIB6Po/o=
 =9jQK
 -----END PGP SIGNATURE-----

Merge tag 'tegra-for-4.10-firmware' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/drivers

firmware: Add Tegra IVC and BPMP support

IVC is an inter-processor communication protocol that uses shared memory
to exchange data between processors. The BPMP driver makes use of this
to communicate with the Boot and Power Management Processor (BPMP) and
uses an additional hardware synchronization primitive from the HSP block
to signal availability of new data (doorbell).

Firmware running on the BPMP implements a number of services such as the
control of clocks and resets within the system, or the ability to ungate
or gate power partitions.

* tag 'tegra-for-4.10-firmware' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  dt-bindings: firmware: Allow child nodes inside the Tegra BPMP
  dt-bindings: Add power domains to Tegra BPMP firmware
  firmware: tegra: Add BPMP support
  firmware: tegra: Add IVC library
  dt-bindings: firmware: Add bindings for Tegra BPMP

Signed-off-by: Olof Johansson <olof@lixom.net>
2016-11-18 18:28:14 -08:00
Olof Johansson
dd3eedd338 mailbox: Add Tegra HSP driver
This contains the device tree bindings and a driver for the Tegra HSP, a
 hardware block that provides hardware synchronization primitives and is
 the foundation for inter-processor communication between CPU and BPMP.
 -----BEGIN PGP SIGNATURE-----
 
 iQIwBAABCAAaBQJYLyMbExx0cmVkaW5nQG52aWRpYS5jb20ACgkQ3SOs138+s6El
 gw/9FfJG4Ze7thnBHHVhDDuZaVF6U9gIKkEHfTKkUlU8fkOtF+xnTBCK3LRkHEsk
 X0zyQlKKa/lzUGB52Fsi9jpVjt1WXvyuVOgCaQ+Zg9GXCmfXxOrNquAIH9sLhHSk
 SpBsVHDsCk5UT4pINJrmdpGN2nSdQ4PvsRZM8wRkRs39C7+nf6wSHMrjURCt/DLT
 Cub94gLcFiLddmO+c1OUShUjnOcy7yBIWn/EycxrKOqMDxzY9JK2Q0n8Cc3f1UVN
 P5WYgjvLss5pGWZOBvPwefMVXru7BFBh1jOceabueD3DjNEP8nWb2/WQbXMUDVzq
 QQ/q/4MIEmQMc8B8Z0brEmpIMn870Y3IPDaUmG4F6soW9yRL1gyA9PiF4YlcTe53
 b0l0Y4/aehgHqCz1c9FulZW+qBe746fND/CNzTER7QfUe5CNotAtRUWG99v/8gGF
 gtVmwTVnC5jn4ytUbLHEM4JtghKUuoIHqAWhY7KdwTDOm70TLmdHmOTVKN0+Ej3V
 IgFCo+WIzleoHyK8GiUifOZSnLIJuctDznIUMnw2OmBlslvcdE90XbSQ00hlYC3N
 Z9N2X6747OhGZF6viHWdWOtFfH+LpRj4S0LIaoRkvU5GRUi0fOjuTIXfBhlPe+11
 wZ/AZAav1CHfaJk66H7Vq2rmRxdwe56t9fzy/xJM7ja+9m0=
 =Gojp
 -----END PGP SIGNATURE-----

Merge tag 'tegra-for-4.10-mailbox' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/drivers

mailbox: Add Tegra HSP driver

This contains the device tree bindings and a driver for the Tegra HSP, a
hardware block that provides hardware synchronization primitives and is
the foundation for inter-processor communication between CPU and BPMP.

* tag 'tegra-for-4.10-mailbox' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  mailbox: tegra-hsp: Use after free in tegra_hsp_remove_doorbells()
  mailbox: Add Tegra HSP driver
  dt-bindings: mailbox: Add Tegra HSP binding
  soc/tegra: Add Tegra186 support

Signed-off-by: Olof Johansson <olof@lixom.net>
2016-11-18 18:23:06 -08:00
Olof Johansson
a90a6f9c3d Device tree changes for omaps for v4.10 merge window:
- A series of patches to configure tps65217 PMIC interrupts for
   power button, charger and usb and use them on am335x
 
 - Configure EEPROM, LEDs and USR1 button for omap5 boards
 
 - Add tscadc DMA properites for am33xx and am4372
 
 - Configure baltos-ir5221 both musb channels to host mode
 
 - Configure internal and external RTC clocks for am335x boards
 
 - Don't reset gpio3 block on baltos
 
 - Remove pinmux for dra72-evm for erratum i869, fix the regulators
   and seprate out tps65917 support
 
 - Add dra718-evm support
 
 - Add minimal droid 4 xt894 support
 -----BEGIN PGP SIGNATURE-----
 
 iQIuBAABCAAYBQJYK1YKERx0b255QGF0b21pZGUuY29tAAoJEBvUPslcq6Vzd9AQ
 ANr+2RtDJw9vVf8SIhzwaZBCYJ9qifO1nUqTxGYDKVFYwkemrbYWQF9UnT7U+L4q
 DaVh4+5TJMB3EZz7lVHv28NJ3+dU4aFuRPGb/sOy5aAWxrVKJ361BmEcEiWDFuuM
 SxdqxucShKNmU848ehG1J6W5P1ESsBbYlSy7s1HRQ3n6Q9C1cu9z5RpoT5gU5/aR
 DQy0Wv9k+g8vzW/z5ovaqBTvtmDvROOUYE1Cbjfe2kLSmBgRTiyMBNSEPGAuRxq+
 e+ASMStTzmWotXTiLANa2RDz/xTaiKNzdG2YyUscKhhAeN9di23HcGlwk2JQszC6
 CtI/Pl0vsky647B9jwJdrjXD2i6zqrqVau6wR/Gm7zufiejSFnDONft7byD2EYlc
 o06XUHA+vl4UdGCS3Ik8pvDuclpqTNGHuAPumMovv9Q8mBlMdfyUxMWt4ZlZBpgl
 1oz4+ZNkDPl6ZMqc/RSe+PxT+iT55tTs6BIPSJ5+ooFunx2SzOsMPO9r785w54yp
 eP0scopmek8fpsFOWevJh1lyUbXB4o9t0joaxsPyDQd2zYvsomds+Lu7r0Bp8ocY
 ekCnU2fizKI8uo1WYJRhBwqk+p9qbAWOXQtLWXCNuuejxZya2iUwO900k/0tqxVt
 Yy5LQ+nuv7FKb0jVgptXYlWglOg1PUDSfpq4Zq/i8Awk
 =GYpd
 -----END PGP SIGNATURE-----

Merge tag 'omap-for-v4.10/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt

Device tree changes for omaps for v4.10 merge window:

- A series of patches to configure tps65217 PMIC interrupts for
  power button, charger and usb and use them on am335x

- Configure EEPROM, LEDs and USR1 button for omap5 boards

- Add tscadc DMA properites for am33xx and am4372

- Configure baltos-ir5221 both musb channels to host mode

- Configure internal and external RTC clocks for am335x boards

- Don't reset gpio3 block on baltos

- Remove pinmux for dra72-evm for erratum i869, fix the regulators
  and seprate out tps65917 support

- Add dra718-evm support

- Add minimal droid 4 xt894 support

* tag 'omap-for-v4.10/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (22 commits)
  ARM: dts: Add minimal support for motorola droid 4 xt894
  ARM: dts: Add support for dra718-evm
  ARM: dts: dra72: Add separate dtsi for tps65917
  ARM: dts: dra72-evm: Fix modelling of regulators
  ARM: dts: dra72-evm: Remove pinmux configurations for erratum i869
  ARM: dts: am335x-baltos: don't reset gpio3 block
  ARM: dts: AM335X-evmsk: Add the internal and external clock nodes for rtc
  ARM: dts: AM335X-evm: Add the internal and external clock nodes for rtc
  ARM: dts: AM335X-bone-common: Add the internal and external clock nodes for rtc
  ARM: dts: am335x-baltos-ir5221: use both musb channels in host mode
  ARM: dts: am4372: add DMA properties for tscadc
  ARM: dts: am33xx: add DMA properties for tscadc
  ARM: dts: omap5 uevm: add USR1 button
  ARM: dts: omap5 uevm: add LEDs
  ARM: dts: omap5 uevm: add EEPROM
  ARM: dts: am335x: Add the power button interrupt
  ARM: dts: am335x: Add the charger interrupt
  dt-bindings: mfd: Provide human readable defines for TPS65217 interrupts
  ARM: dts: am335x: Support the PMIC interrupt
  ARM: dts: tps65217: Add the power button device
  ...

Signed-off-by: Olof Johansson <olof@lixom.net>
2016-11-18 16:43:19 -08:00
Olof Johansson
78d375b97e Reset controller changes for v4.10
- remove obsolete STiH41[56] platform support
 - add Oxford Semiconductor OX820 support
 - add reset index include files for OX810SE and OX820
 - make drivers with boolean Kconfig options explicitly
   non-modular
 - allow shared pulsed resets via reset_control_reset, which
   in this case means that the reset must have been triggered
   once, but possibly earlier, after the function returns, and
   is never triggered again for the lifetime of the reset
   control
 -----BEGIN PGP SIGNATURE-----
 
 iQJMBAABCAA2FiEEBsBxhV1FaKwXuCOBUMKIHHCeYOsFAlgrXr8YHHBoaWxpcHAu
 emFiZWxAZ21haWwuY29tAAoJEFDCiBxwnmDrP7UQAIVZfUCBUfc5PF6u/pWrUOtn
 Eg7SWvo1TYcJPJKoICwlRwKXmzLVfmivCsxW8my5Ddb66JQ5hMkoqsXALQl0sAZK
 U2xXiy76z+EsL9tvvJ2b9Yqx3BIbzPkZyv419RWMVldqUtdbtHe70xLjF7DVfaTs
 f9BTh0OAN55yWhYS7HQDQKm2bvUe3jy0XDzXlbPXgdy/roAReBFSFO4r80cbbAfv
 DZwhrzmGSAGF0fE/TQA65wkkuZMM/rE3cjOjieVC4ZaeX7OQ+eqIMwph25uHCEnS
 61g1J8GcwKvtP1iXAg5VdLAW2TTGTHztBR8UchrxZfySnKWR0rGee3LkQX8LVfih
 mVI2jtzpq6fGYSask9B/fGnObfjWF0kHcgy525kdcNbo8HVZ0vdgZI/yoCh3ZViT
 RHpuXk5cHYM6t7aNGOBvVvdKOL3wtuFUrJKYEpOL3BB//SLZXxCDCawMt7H2XHX5
 3EbLfKikQQbMNs8XzeSfTOQi9ITcdwnLdTqjBunAbf0aMiF+SOtDS/yb6BsG7zjv
 muz4LUtcMq5YfXnZbB11ngz+DSN/g7MHIjl9MXG8kMO9JsVb1R9VtmbxNQ87EU92
 oKGy4ix0vSIRl7/gmmFZt4iV8RQOvffkB4iIkOXlWXdnsUrqIj3V/YwEr+8leoWk
 MHr75XggJOUH9VaMUP/2
 =e7kp
 -----END PGP SIGNATURE-----

Merge tag 'reset-for-4.10' of git://git.pengutronix.de/git/pza/linux into next/drivers

Reset controller changes for v4.10

- remove obsolete STiH41[56] platform support
- add Oxford Semiconductor OX820 support
- add reset index include files for OX810SE and OX820
- make drivers with boolean Kconfig options explicitly
  non-modular
- allow shared pulsed resets via reset_control_reset, which
  in this case means that the reset must have been triggered
  once, but possibly earlier, after the function returns, and
  is never triggered again for the lifetime of the reset
  control

* tag 'reset-for-4.10' of git://git.pengutronix.de/git/pza/linux:
  reset: allow using reset_control_reset with shared reset
  reset: lpc18xx: make it explicitly non-modular
  reset: zynq: make it explicitly non-modular
  reset: sunxi: make it explicitly non-modular
  reset: socfpga: make it explicitly non-modular
  reset: berlin: make it explicitly non-modular
  dt-bindings: reset: oxnas: Update for OX820
  dt-bindings: reset: oxnas: Add include file with reset indexes
  reset: oxnas: Add OX820 support
  reset: sti: softreset: Remove obsolete platforms from dt binding doc.
  reset: sti: Remove STiH415/6 reset support

Signed-off-by: Olof Johansson <olof@lixom.net>
2016-11-18 16:17:45 -08:00
Stephen Warren
ad7cb19824 dt-bindings: Add power domains to Tegra BPMP firmware
The Tegra186 BPMP is also a provider of power domains. Enhance the
device tree binding to describe this.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-11-18 14:33:43 +01:00
Joseph Lo
d55865608f dt-bindings: firmware: Add bindings for Tegra BPMP
The Boot and Power Management Processor (BPMP) is a co-processor found
in Tegra SoCs. It is designed to handle the early stages of the boot
process as well as to offload power management tasks (such as clocks,
resets, powergates, ...).

The binding document defines the resources that are used by the BPMP
firmware, which implements the interprocessor communication (IPC)
between the CPU and the BPMP.

Signed-off-by: Joseph Lo <josephl@nvidia.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-11-18 14:33:41 +01:00
Olof Johansson
d2e7d59028 - Add bindings for mtk-scpsys for mt2701
- Add clocks for auxadc on mt8173-evb
 - Add nodes needed by clock controller for mt2701
 - Use clocks from the clock controller for the uart of mt2701
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABAgAGBQJYJdcrAAoJELQ5Ylss8dNDoJcP/2q1LuStbojWMWxFKexQBCIk
 8VEPzY8fyEckshbmgnz36qqp2MnecTLjb1ETesFIEGZWbEBnoAJC9hyIg6fFVZQi
 mFZC8/0I7uvaFZHa+a3fQZb3tCmLMcWbAaGvA0p28kNRKnRhTMVHhLa7Z0WmMrG+
 lQLlBBTP/xHErOakFJagkFIWYmmmMReS7x+X/tnVPienxkwODjpLYJQLL1wVmoqV
 lpSj/nSRRDg8CeeG8/x+Odtr77L56glDMwwieXVpBe2sd+CpRk3QSTTcuYLkUp46
 JBBKrr7TLLD6KEw6FgPjvjWDR3TH7S2wkbZVJN4B+8tmdEhpQhnle2MpJ6TYLKQb
 ENwZ9JP70UD8o6mWb5e/g9R82WxUq1KDpdlU71OeBsnqfJRn1sge8bsO6+qs4+6Z
 JapDW+Zwsewp9VZS12k4VdsCsYR0MZgX6XXj/NOOseJOMUXBFAoHj7vaC5Gj0UIT
 VFKndrzWjIaVbaLHA/2KyVvOpJsEVTwSURyEko6XnTRLg+E85SSx+r6Bp3rlSlCV
 Javet8M9YTLhPa1IeFMvf/1V4C4poX5tE4tvCiSZC1Wvxto5FSEgeGarq59Pgyi3
 UWnxao8FHBHi3NU8khTI+rnIYtw5WxkEpqU5UUTYMUwsQ3x83VnU0WzpCSKQSNdD
 Od24wmc/rrNKeU098abr
 =wFjD
 -----END PGP SIGNATURE-----

Merge tag 'v4.9-next-dts' of https://github.com/mbgg/linux-mediatek into next/dt

- Add bindings for mtk-scpsys for mt2701
- Add clocks for auxadc on mt8173-evb
- Add nodes needed by clock controller for mt2701
- Use clocks from the clock controller for the uart of mt2701

* tag 'v4.9-next-dts' of https://github.com/mbgg/linux-mediatek:
  arm: dts: mt2701: Use real clock for UARTs
  arm: dts: mt2701: Add clock controller device nodes
  arm64: dts: mt8173: Fix auxadc node
  soc: mediatek: Add MT2701 power dt-bindings

Signed-off-by: Olof Johansson <olof@lixom.net>
2016-11-17 23:45:25 -08:00
Olof Johansson
5589d62484 Qualcomm ARM Based Driver Updates for v4.10
* Fixup QCOM SCM to use devm_reset_controller_register
 * Add QCOM pinctrl to Qualcomm MAINTAINERS entry
 * Add PM8994 regulator definitions
 * Add stub for WCNSS_CTRL API
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJYJ/oEAAoJEFKiBbHx2RXVU1gP/R7GzHttdlGHoq0A84UnI9FI
 OANdzjhcelwq2N5M2AiFEnCuB5jFomSmQqUXaK6ehzJktGGu6ZVM8jtg7RIatEVn
 4lnM79qoDNvbnv/O4ILZ8U/PPsTcFyIQiKKpmCLEoSoMpZMYWaUTWlWQ1swmqnI/
 o7HPUQykrkZyg7YmFxBiLEs/PQNMcje9aWOMzmk2ErDofXCBqXrB6xdKWqjMGvlP
 qNAWb6VDB6ehQ/b9V7Vew5JM2Nx3x2C/VAMff12MA102GN5eMTeM42uYZM6ifeyU
 ugfG0QVR0rdo7xaeBAyVjumOC5YETFH7+HF5UudhmsRkEJPx2g0SgEVIYTbPQhaa
 zrFm/wvoEGVGUECAH7FwAQmUjoq3HrSvDJt3Jivx9kW7DCcqcRHzrjnzBePb/YQW
 5DKdcYHsz2dA+aslyFpZbQpVyYjeLzsCrIrM+qnqkmsm2gHpxSDb1wKfMvqvcnYD
 RbEk4hFtF4aE33J2UxSOM7JE6qHvbeRJGsZnDQFawtq+lANVor3oiTJHUyQDRzz9
 QveZnCRHREK2fJY68+gvfi5hL8BU6ojIQcf5KZXntJrUXDBBl/qS5wkc+qrBvjTT
 5WvezqmmA27rBHyPuPqfI210ZzM5jNtVRkdB29TKUbUZFfOdZUIEL52bDL+hG9hT
 U0gaKLfv7guaWxYCiWMn
 =bw/l
 -----END PGP SIGNATURE-----

Merge tag 'qcom-drivers-for-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/drivers

Qualcomm ARM Based Driver Updates for v4.10

* Fixup QCOM SCM to use devm_reset_controller_register
* Add QCOM pinctrl to Qualcomm MAINTAINERS entry
* Add PM8994 regulator definitions
* Add stub for WCNSS_CTRL API

* tag 'qcom-drivers-for-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux:
  firmware: qcom: scm: Use devm_reset_controller_register()
  MAINTAINERS: add drivers/pinctrl/qcom to ARM/QUALCOMM SUPPORT
  pinctrl: pm8994: add pad voltage regulator defines
  soc: qcom: wcnss_ctrl: Stub wcnss_ctrl API

Signed-off-by: Olof Johansson <olof@lixom.net>
2016-11-17 23:38:27 -08:00
Olof Johansson
e99b4c970b 32bit devicetree changes for Rockchip including removal of skeleton.dtsi
inclusion, missing unit names for memory nodes, various frequency
 optimizations allowing for better performance on rk3066, the usage of
 pin constants to bridge between the two numbering schemes used (gpio
 controllers using 0-31 and pins being labeled A0-A7,..., D0-D7)
 and UHS/HS modes for the mmc controllers on the popmetal board.
 
 Two new boards, the PX3-based evaluation board, with the PX3 being an
 industrial variant of the rk3188 soc and the Rikomagic MK808 board
 based around the rk3066 are also added.
 -----BEGIN PGP SIGNATURE-----
 
 iQEtBAABCAAXBQJYJzNfEBxoZWlrb0BzbnRlY2guZGUACgkQ86Z5yZzRHYGsQQf/
 WWYA4/oR4pT8HMns5coctc2zOyNU8KYmaeRl7TViUna+HA6/m2SGMqomTFV2AK0v
 Ha3M6A35dDUGJNmAbEB5oolGOwHh82gZKYxYIQiNX+zCxeb5JxKCXWSqAjC9Ndwu
 h600H1K/Qb26OzaVE/ICtlveduN+9BWrlzNseHsm99Z93FNsRLN0Z8s2Mn3jra6P
 2Pf1sJkOPuh47i/Y/gTDVcFSf6Srb4SM/26fiZjrRa8LaaO/0I2Ku34ne9FygGzi
 0GBHWh2SILM297MZMcrCDoJvTTqLT05tUrX1PDGmdunqP8vnsOAgvL9291G8d4sw
 PbYE3onlyoxHmeOSffAe5g==
 =AXPK
 -----END PGP SIGNATURE-----

Merge tag 'v4.10-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt

32bit devicetree changes for Rockchip including removal of skeleton.dtsi
inclusion, missing unit names for memory nodes, various frequency
optimizations allowing for better performance on rk3066, the usage of
pin constants to bridge between the two numbering schemes used (gpio
controllers using 0-31 and pins being labeled A0-A7,..., D0-D7)
and UHS/HS modes for the mmc controllers on the popmetal board.

Two new boards, the PX3-based evaluation board, with the PX3 being an
industrial variant of the rk3188 soc and the Rikomagic MK808 board
based around the rk3066 are also added.

* tag 'v4.10-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (21 commits)
  ARM: dts: rockchip: replace to "max-frequency" instead of "clock-freq-min-max"
  ARM: dts: rockchip: Set sdmmc frequency at boot time for rk3066a
  ARM: dts: rockchip: use pin constants to describe gpios on Popmetal-RK3288
  include: dt-bindings: Add GPIO pin index definition for rockchip pinctrl
  ARM: dts: rockchip: Add rk3066 MK808 board
  devicetree: Add vendor prefix for Rikomagic
  ARM: dts: rockchip: initialize rk3066 PLL clock rate
  clk: rockchip: Add binding ids for cpu and peri clocks on rk3066
  ARM: dts: rockchip: enable HS200/DDR52 mode for emmc on rk3288-popmetal
  ARM: dts: rockchip: Support UHS mode for SD card on PopMetal-RK3288 board
  ARM: dts: rockchip: remove always-on and boot-on from vcc_sd for px3-evb
  ARM: dts: rockchip: update compatible strings for Rockchip efuse
  ARM: dts: rockchip: add rockchip PX3 Evaluation board
  ARM: dts: rockchip: Add missing unit name to memory nodes in rk3xxx boards
  ARM: dts: rockchip: Add missing unit name to memory nodes in rk3288 boards
  ARM: dts: rockchip: Add missing unit name to memory nodes in rk322x boards
  ARM: dts: rockchip: Add missing unit name to memory nodes in rk3036 boards
  ARM: dts: rockchip: Remove skeleton.dtsi inclusion in rk3xxx.dtsi
  ARM: dts: rockchip: Remove skeleton.dtsi inclusion in rk3288.dtsi
  ARM: dts: rockchip: Remove skeleton.dtsi inclusion in rk322x.dtsi
  ...

Signed-off-by: Olof Johansson <olof@lixom.net>
2016-11-17 23:31:55 -08:00
Olof Johansson
a4a1fb15c5 STi dts update:
Change sound card name for B2120
 Enable sound card for B2260
 Remove stih415-clks.h
 Identify critical clocks for STiH407
 Fix typo in stih407-pinctrl.dtsi
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJYJDWMAAoJEMrHeC97M/+maG4P/1Yd84g5fE8Wr4AoZzdXN6kP
 J8A/bB7cHQr84NHRTPwKSxuMVXA80ifpg68nbNjdy1GCEGG7APtVySVffBR+ddwg
 O76837cO1MezHieU6hBof+fiFmiHGA9bqEr6dw91+sD418gWVuStqm94W1p0P4bg
 i+IGwJdLGq/7KMFh5cIFUdqBdB2MINX1sfqzYg6mqmv/RidTg0EDspYg2rutBYuD
 ZBmEoQBHOLlFavlRZ7mcZ7dc4vuuLKiTWwzXJyfs1BmGrhNbBOvcXRvIJJi1vrfN
 GJuhIYErEDLq58/eKNCOpIhVzNcWg1MNvO0q04KDK+8QUt15rxO1kHoGt20Sj/fd
 X9AkRhvGPVBaHJT3IGX7lK4n52FVNPDmWi44vlEvWR8TcdgrOGWK3FbJDqPKJl+m
 QvFGkJ/d+pfpdl0PKA4gIP/YQK6taYeRczPr9Q+2ICSxqIyO8RqL04feMiFjqoae
 FMN0Q+1ehP5UfCRgJsNN8fWgm9d2cvFO47le/WBxrYyH/al8eRyGelonsfOu9+mI
 kqE8YZiG1KHv4v+Kc2pbOWi6bQcjGuSLrFb34Aux5xLU5a3kjMW+Ypz/Yp7rCdvQ
 wmqiP4V1NLnuk6y6AKrq9aToItPZSDSApRF2TIh1c4N3xLIVI/kH3BG7uSVpRNCo
 1Q5fyFEsrEov0wRXVXqZ
 =cIvM
 -----END PGP SIGNATURE-----

Merge tag 'sti-dt-for-4.10-round2' of git://git.kernel.org/pub/scm/linux/kernel/git/pchotard/sti into next/dt

STi dts update:

Change sound card name for B2120
Enable sound card for B2260
Remove stih415-clks.h
Identify critical clocks for STiH407
Fix typo in stih407-pinctrl.dtsi

* tag 'sti-dt-for-4.10-round2' of git://git.kernel.org/pub/scm/linux/kernel/git/pchotard/sti:
  ARM: dts: STiHxxx-b2120: change sound card name
  ARM: dts: STiH410-B2260: enable sound card
  ARM: dts: remove stih415-clks.h
  ARM: dts: stih407-clocks: Identify critical clocks
  ARM: dts: STiH407: DT fix s/interrupts-names/interrupt-names/

Signed-off-by: Olof Johansson <olof@lixom.net>
2016-11-17 23:28:45 -08:00
Stephen Boyd
54fd1b3bc4 clk: renesas: Updates for v4.10 (take two)
- Add R-Car RST driver for obtaining mode pin state, and move the
     related functionality from platform code to DT,
   - Add r8a7743 and r8a7745 CPG Core Clock Definitions.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJYIJj/AAoJEEgEtLw/Ve773fgP/3yhgJLa6zoYzFE4lS5q/+vk
 95DAqkGrc9D+QzCw1/YAb8w2zqr9kigwBcwc9xlv9wQ/5Nx63WN9jgccw1Kd2xhU
 OaKhgyHpeXpH9MM46TRVJ5Txu7xLVofxtgxGv4ED43sNwZinrH9PrC/ELgQWgbq+
 SQTVjE4bKqANNugt91UzPIzL5YPeJvX02SlFoDjbS3XNg5/cTjAaidVW24Ed8x5S
 OAUkC4chm81Jz4B7M5QcVy4vdfb9aE/m7d5a6iy6nE5EopH6Puu8RwL0SzvltDp4
 AxIj5ZslOKhvqCKvVlp2ALlBeZ1rOXr5KsOdHHN+rkMiaR8a8agv7y/H/gJSbwiZ
 x7oI0QDiS5/6tYDxx67KtGECMAcSK0b0p/rWziYw9C5BDuvuMe5HhxN9fesHLUOx
 Yq6f0GwveUgWfcHIjcEh6Htj4dUfXaxiTgZSF1Dgp5SvW9fPhg40Rz3+ahnT40rP
 8Ke/W5M5QZ2f+L51l3QiZ3NtX1kWLr1H8GExV15Cm08aBWx7p/8fvdqpv1EcVhiW
 dEnhtPBVf8O/LiZ6eS+0aBQS22fl9u06s3d/vXQoO9kaCcK+BWP9cB+5CsieTD6s
 D/3iOq4da3OnOjTcmIQEKEsnrtJq5qxBOZ52Fk422Wk/EX9Bwl+/ggmXhchiGn4V
 I28aLLIUHIfmOMb5H23E
 =Pd5n
 -----END PGP SIGNATURE-----

Merge tag 'clk-renesas-for-v4.10-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into clk-next

Pull Renesas clk driver updates from Geerty Uytterhoeven:

  - Add R-Car RST driver for obtaining mode pin state, and move the
    related functionality from platform code to DT,
  - Add r8a7743 and r8a7745 CPG Core Clock Definitions.

The commits here are intermingled with arm-soc material because
of the hard dependency we're breaking between mach code and
driver code. We're replacing that with a driver dependency
between the soc driver and the clk driver.

* tag 'clk-renesas-for-v4.10-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers: (25 commits)
  clk: renesas: Add r8a7745 CPG Core Clock Definitions
  clk: renesas: Add r8a7743 CPG Core Clock Definitions
  clk: renesas: rcar-gen2: Remove obsolete rcar_gen2_clocks_init()
  clk: renesas: r8a7779: Remove obsolete r8a7779_clocks_init()
  clk: renesas: r8a7778: Remove obsolete r8a7778_clocks_init()
  ARM: shmobile: rcar-gen2: Stop passing mode pins state to clock driver
  ARM: shmobile: r8a7779: Stop passing mode pins state to clock driver
  ARM: shmobile: r8a7778: Stop passing mode pins state to clock driver
  clk: renesas: rcar-gen3-cpg: Remove obsolete rcar_gen3_read_mode_pins()
  clk: renesas: r8a7796: Obtain mode pin values from R-Car RST driver
  clk: renesas: r8a7795: Obtain mode pin values from R-Car RST driver
  clk: renesas: rcar-gen2: Obtain mode pin values using RST driver
  clk: renesas: r8a7779: Obtain mode pin values from R-Car RST driver
  clk: renesas: r8a7778: Obtain mode pin values using R-Car RST driver
  arm64: renesas: r8a7796 dtsi: Add device node for RST module
  arm64: renesas: r8a7795 dtsi: Add device node for RST module
  ARM: dts: r8a7794: Add device node for RST module
  ARM: dts: r8a7793: Add device node for RST module
  ARM: dts: r8a7792: Add device node for RST module
  ARM: dts: r8a7791: Add device node for RST module
  ...
2016-11-17 13:31:07 -08:00
Stephen Boyd
38320181c7 Allwinner clock changes for 4.10
The usual patches from us, but most notably the introduction of the A64
 clocks unit.
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABCAAGBQJYK30lAAoJEBx+YmzsjxAgNqMP/A0eKZkzCWP8QXePS5OVTzjn
 Afnp85tpYGNrR5OTwJiM32IDAAU6mvb4813Z0MwQ5Wp+TM3APpiRzwnF3yjxeoGu
 Jgzsu+NLgPtp/CozaGC46IlacGRR0amyLhryq8cVOaEKTed4b0t2Xjmk4JsRj7Gp
 2ki5HVs4QSN63p4GixxhxVXgtYNoOBvm3qCgMbWa10j5DIDA2Wf//feudTeu98xa
 gR9uz08xBVHXtIlyjXfY72l/qcjmcRZDdAXPTItZWR4MREuLMh3jlwM2oxMn1nKY
 PLu7KfPail1ATv+6Pa5EJcAqvxCnW8mH8F0Tk/xqd/ZGuEwHW5rRPVl5NLO81iBe
 K4Pfh8DrEtMBhS2C5nY3qOYQP6XcE4d2OSN8zNCM50ATdXMx+6gX1Dep6cz6waKj
 Uo/v6GdkMhKgd1lBcH2CGJrWN7HQWb4wM/gctIa7T5uIQp/WBWEXACpOmRsD+4yt
 c83qtys3FTO5Iuj1UVETHm8tAIC58xvQ+ZYs3Z7wusMJVRMH2KMi7MiNXF0zBHDL
 cG/cQa9MrhIOJgd04TC8EDye/+Wn1rLFhMZWnbgcThpdKmd+MSPO/3ZeNKkCFJAh
 F3CD+5oeQA9mctJBirpsPCrGnKwtkEZycB7jymkEPptvad+TLfGHdkwE0U2FhaxE
 qN094vyPeAgceu9u9NyZ
 =7+Az
 -----END PGP SIGNATURE-----

Merge tag 'sunxi-clk-for-4.10' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into clk-next

Pull Allwinner clock changes from Maxime Ripard:

The usual patches from us, but most notably the introduction of the A64
clocks unit.

* tag 'sunxi-clk-for-4.10' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux:
  clk: sunxi-ng: sun8i-h3: Set CLK_SET_RATE_PARENT for audio module clocks
  clk: sunxi-ng: sun8i-a23: Set CLK_SET_RATE_PARENT for audio module clocks
  clk: sunxi-ng: Add A64 clocks
  clk: sunxi-ng: Implement minimum for multipliers
  clk: sunxi-ng: Add minimums for all the relevant structures and clocks
  clk: sunxi-ng: Finish to convert to structures for arguments
  clk: sunxi-ng: Remove the use of rational computations
  clk: sunxi-ng: Rename the internal structures
  clk: sunxi: mod0: improve function-level documentation
2016-11-16 11:19:20 -08:00
Stephen Boyd
c284a7ba72 i.MX clock updates for 4.10:
- A patch series to fix the long standing issue with glitchy parent
    mux of ldb_di_clk, which can hang up LVDS display when ipu_di_clk
    is sourced from ldb_di_clk.
  - A patch to add imx6ull clock support on top of imx6ul clock driver.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJYKni2AAoJEFBXWFqHsHzOu+UIAKpiVKqacJYxD1wEJDh9Mtq2
 o9U10aGY6yl3ZEa5Ik8OTqg2Aa6ZT5kaV8h9i5uv7XIGqCSM6SUcWweF0KlRyJP4
 7bjz9rcir2/zXys+dVuRodUiF8uowoFxgw7wAHwHfzs1oA7ihQaUB4v6vBiNbADq
 zheCn2AqDWhIKAOFkLcyEid2IyIz0S/tlyzfElBmukSons+0zTrJ+e9QePzcuRZO
 TnhZAxc/FQwcPZ/a2kiwiOOfQXWQld5pIeIp1YHWD4+L4m0Yxb/WK1yaocTxox2O
 Ek8BPlkpNYdic8g3DRlwZGCHe5UaESSEQ3pyXlgYAdIOA2i+0tlnnCVCW0gNvQc=
 =DJo7
 -----END PGP SIGNATURE-----

Merge tag 'imx-clk-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into clk-next

Pull i.MX clock updates from Shawn Guo:

 - A patch series to fix the long standing issue with glitchy parent
   mux of ldb_di_clk, which can hang up LVDS display when ipu_di_clk
   is sourced from ldb_di_clk.
 - A patch to add imx6ull clock support on top of imx6ul clock driver.

* tag 'imx-clk-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  clk: imx: clk-imx6ul: add clk support for imx6ull
  clk: imx6: Fix procedure to switch the parent of LDB_DI_CLK
  clk: imx6: Make the LDB_DI0 and LDB_DI1 clocks read-only
  clk: imx6: Mask mmdc_ch1 handshake for periph2_sel and mmdc_ch1_axi_podf
2016-11-16 11:16:07 -08:00
Heiko Stuebner
a6a1685346 Merge branch 'v4.10-shared/clkids' into v4.10-armsoc/dts32 2016-11-16 12:47:38 +01:00
Shawn Lin
5fababc161 clk: rockchip: add dt-binding header for rk1108
Add the dt-bindings header for the rk1108, that gets shared
between the clock controller and the clock references in the dts.

Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-11-16 12:18:58 +01:00
Joseph Lo
e983940270 dt-bindings: mailbox: Add Tegra HSP binding
Add DT binding for the Hardware Synchronization Primitives (HSP). The
HSP is designed for the processors to share resources and communicate
with one another. A set of hardware synchronization primitives for
interprocessor communication (IPC) is provided. IPC protocols can use
use these hardware synchronization primitives when operating between
processors in an AMP configuration.

Signed-off-by: Joseph Lo <josephl@nvidia.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-11-15 15:52:58 +01:00
Stephen Boyd
09d5dc586b PLL initialization for PLLs having both an integral and fractional mode
(rk3036, rk3399) does now take into account the mode that the PLL is
 actually running at.
 As always also some additional and optimized PLL rates for rk3066 and
 rk3399, some additional clock ids for rk3066 and some additional clocks
 on rk3399 are now sucessfully handled inside their respective driver.
 -----BEGIN PGP SIGNATURE-----
 
 iQEtBAABCAAXBQJYJy9BEBxoZWlrb0BzbnRlY2guZGUACgkQ86Z5yZzRHYEZMwf/
 XPnSVfSOSXSR3A6JOc7emX5vXVcXWq3xkt98l85qhiJO8yQg+vwFk2Ur7Q22cwJI
 ycg6K1EAokKt7/ZE48XZ0JYXQknxxSnO7ZU0MTVQVtQB7+oWr79VY+o+WylgsSZ7
 LApU2lGniYXJOnQBTfNl8Zqyrg+M+q6zTW9HwK47TH51xjUiY9K+/nyNlAuEqBWQ
 TR8EuOQGxIQWHzJ7HFxCO4DNGEszrRkQMOcDsp2b5rxKTF3+waQne6OhX95JZpX5
 PI12A1RC8+DNvYRZlhAnrmKHDycu6QYe18ZQADs5FPihMoxK4Eh/eXzZIIgXBkXd
 aOc4ljF03ry8mWyKtENVCg==
 =2Wr8
 -----END PGP SIGNATURE-----

Merge tag 'v4.10-rockchip-clk1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into clk-next

Pull Rockchip clk driver updates from Heiko Stuebner:

PLL initialization for PLLs having both an integral and fractional mode
(rk3036, rk3399) does now take into account the mode that the PLL is
actually running at.

As always also some additional and optimized PLL rates for rk3066 and
rk3399, some additional clock ids for rk3066 and some additional clocks
on rk3399 are now sucessfully handled inside their respective driver.

* tag 'v4.10-rockchip-clk1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  clk: rockchip: Ignore frac divisor for PLL equivalence when it's unused
  clk: rockchip: remove more CLK_IGNORE_UNUSED for rk3399 clocktree
  clk: rockchip: add 400MHz to rk3066 clock rates table
  clk: rockchip: optimize 800MHz and 1GHz pll rates on RK3399
  clk: rockchip: Use clock ids for cpu and peri clocks on rk3066
  clk: rockchip: Add binding ids for cpu and peri clocks on rk3066
  clk: rockchip: add 533.25MHz to rk3399 clock rates table
2016-11-14 18:38:35 -08:00
Bai Ping
73cd5e53ca clk: imx: clk-imx6ul: add clk support for imx6ull
imx6ull is the derived SoC from imx6ul

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Bai Ping <ping.bai@nxp.com>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-11-15 08:55:36 +08:00
Stephen Boyd
c60df0a42b Merge branch 'clk-hisi' into clk-next
* clk-hisi:
  clk: hisilicon: add CRG driver for Hi3516CV300 SoC
  clk: hisilicon: add CRG driver for Hi3798CV200 SoC
2016-11-14 14:25:11 -08:00
Pan Wen
c80dfd9bf5 clk: hisilicon: add CRG driver for Hi3516CV300 SoC
Add CRG driver for Hi3516CV300 SoC. CRG(Clock and Reset
Generator) module generates clock and reset signals used
by other module blocks on SoC.

Signed-off-by: Pan Wen <wenpan@hisilicon.com>
Signed-off-by: Jiancheng Xue <xuejiancheng@hisilicon.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-11-14 12:04:39 -08:00
Jiancheng Xue
707d33cb0b clk: hisilicon: add CRG driver for Hi3798CV200 SoC
Add CRG driver for Hi3798CV200 SoC. CRG(Clock and Reset
Generator) module generates clock and reset signals used
by other module blocks on SoC.

Signed-off-by: Jiancheng Xue <xuejiancheng@hisilicon.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-11-11 15:43:49 -08:00
Stephen Boyd
81ab3279c5 Merge branch 'clk-qcom-rpm' into clk-next
* clk-qcom-rpm:
  clk: qcom: Add support for RPM Clocks
  clk: qcom: Add support for SMD-RPM Clocks
  clk: qcom: Always add factor clock for xo clocks
2016-11-10 16:50:16 -08:00
Georgi Djakov
872f91b5ea clk: qcom: Add support for RPM Clocks
This adds initial support for clocks controlled by the Resource
Power Manager (RPM) processor on some Qualcomm SoCs, which use
the qcom_rpm driver to communicate with RPM.
Such platforms are apq8064 and msm8960.

Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-11-10 16:46:56 -08:00
Georgi Djakov
00f64b5887 clk: qcom: Add support for SMD-RPM Clocks
This adds initial support for clocks controlled by the Resource
Power Manager (RPM) processor on some Qualcomm SoCs, which use
the qcom_smd_rpm driver to communicate with RPM.
Such platforms are msm8916, apq8084 and msm8974.

The RPM is a dedicated hardware engine for managing the shared
SoC resources in order to keep the lowest power profile. It
communicates with other hardware subsystems via shared memory
and accepts clock requests, aggregates the requests and turns
the clocks on/off or scales them on demand.

This driver is based on the codeaurora.org driver:
https://www.codeaurora.org/cgit/quic/la/kernel/msm-3.10/tree/drivers/clk/qcom/clock-rpm.c

Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
[sboyd@codeaurora.org: Remove useless braces for single line if]
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-11-10 16:37:55 -08:00
Stephen Boyd
b0e031c94a Merge branch 'clk-qcom-8994' into clk-next
* clk-qcom-8994:
  clk: qcom: Add support for msm8994 global clock controller
  dt-bindings: qcom: clocks: Add msm8994 clock bindings
2016-11-10 15:47:56 -08:00
Jeremy McNicoll
49e2828243 dt-bindings: qcom: clocks: Add msm8994 clock bindings
Signed-off-by: Jeremy McNicoll <jeremymc@redhat.com>
[sboyd@codeaurora.org: Dropped unused and incorrect GDSC defines]
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-11-10 14:27:29 -08:00
Patrice Chotard
226226994c ARM: dts: remove stih415-clks.h
Since v4.8, STiH415/416 clock support has
been removed [1], these platform doesn't boot.
We can remove DTS files related to these socs.

[1] https://patchwork.kernel.org/patch/9157571/

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2016-11-10 09:52:47 +01:00
Milo Kim
98af595804 dt-bindings: mfd: Provide human readable defines for TPS65217 interrupts
TPS65217 supports three interrupt sources. This patch enables assigning
each IRQ number in the charger and power button node. Then corresponding
IRQ will be requested by each driver.

Signed-off-by: Milo Kim <woogyom.kim@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-11-09 14:31:43 -07:00
James Schulman
2c394ca796 ASoC: Add support for CS42L42 codec
Add support for Cirrus Logic CS42L42 codec. SoundWire support
is not enabled. Features support for I2C control and I2S audio.

Signed-off-by: James Schulman <james.schulman@cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-09 13:50:14 +00:00
Sergei Shtylyov
1fa8a875df clk: renesas: Add r8a7745 CPG Core Clock Definitions
Add macros usable by the device tree sources to reference the R8A7745
CPG clocks by index. The data comes from Table 7.2c in revision 1.00 of
the RZ/G Series User's Manual.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2016-11-07 15:13:30 +01:00
Sergei Shtylyov
4e195933de clk: renesas: Add r8a7743 CPG Core Clock Definitions
Add macros usable by the device tree sources to reference the R8A7743 CPG
clocks by index. The data comes from Table 7.2b in revision 1.00 of the
RZ/G Series User's Manual.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2016-11-07 15:09:12 +01:00
Neil Armstrong
0f15f500ff pinctrl: meson: Add GXL pinctrl definitions
Add support for the Amlogic Meson GXL SoC, this is a partially complete
definition only based on the Amlogic Vendor tree.

This definition differs a lot from the GXBB and needs a separate entry.

Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-11-04 23:05:06 +01:00
Sergei Shtylyov
68cc085a4d ARM: dts: r8a7794: remove Z clock
R8A7794 doesn't have Cortex-A15 CPUs, thus there's no Z clock...

Fixes: 0dce5454d5 ("ARM: shmobile: Initial r8a7794 SoC device tree")
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-11-04 10:36:47 +01:00
Chris Brandt
7c8522b704 ARM: dts: r7s72100: add sdhi clock to device tree
Signed-off-by: Chris Brandt <chris.brandt@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-11-04 10:36:17 +01:00
Maxime Ripard
c6a0637460 clk: sunxi-ng: Add A64 clocks
Add the A64 CCU clocks set.

Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-11-03 09:06:18 +01:00
Boris BREZILLON
96bb12dead pinctrl: at91: add support for OUTPUT config
Add support for pin output control through the pinctrl config:
 - support enabling/disabling output on a given pin
 - support output level setting (high or low)

Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-10-31 09:16:46 +01:00
Shunli Wang
3e96c65337 soc: mediatek: Add MT2701 power dt-bindings
Add power dt-bindings for MT2701.

Signed-off-by: Shunli Wang <shunli.wang@mediatek.com>
Signed-off-by: James Liao <jamesjj.liao@mediatek.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2016-10-31 00:59:23 +01:00
Srinivas Kandagatla
636959fc12 pinctrl: pm8994: add pad voltage regulator defines
This patch adds defines for internal voltage regulators used
to switch voltage levels on gpio/mpp pads.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
2016-10-24 15:48:21 -05:00
Neil Armstrong
5881456295 clk: oxnas: Add dt-bindings include file for OX820
In order to support the Oxford Semiconductor Gate clocks, add a
dedicated dt-binding include file for gate indexes.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Michael Turquette <mturquette@baylibre.com>
Link: lkml.kernel.org/r/20161005150752.22618-3-narmstrong@baylibre.com
2016-10-23 10:18:36 -07:00
Neil Armstrong
6fc8ec8bfd clk: oxnas: Add dt-bindings include file for OX810SE
In order to prepare support for the Oxford Semiconductor OX820, add
a dt-bindings include file used by the ox810se dtsi.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Michael Turquette <mturquette@baylibre.com>
Link: lkml.kernel.org/r/20161005150752.22618-2-narmstrong@baylibre.com
2016-10-23 10:18:33 -07:00
Heiko Stuebner
85a063ec1b Merge branch 'v4.10-shared/pinctrl' into v4.10-armsoc/dts32 2016-10-21 18:25:48 +02:00
Andy Yan
150696e2e3 include: dt-bindings: Add GPIO pin index definition for rockchip pinctrl
Add gpio pin index definition to make it easier to describe
GPIO in dts.

Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-10-21 18:21:09 +02:00
Paweł Jarosz
550a13315e clk: rockchip: Add binding ids for cpu and peri clocks on rk3066
Add bindings for ACLK_CPU, HCLK_CPU, PCLK_CPU, ACLK_PERI, HCLK_PERI, PCLK_PERI.

We need this to init it's rate at boot time.

Signed-off-by: Paweł Jarosz <paweljarosz3691@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-10-21 15:26:23 +02:00
Neil Armstrong
8cc134a367 dt-bindings: reset: oxnas: Add include file with reset indexes
Add DT include file for Oxford Semiconductor OX810SE and OX820 reset
controller support.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-10-20 11:55:09 +02:00
Gerd Hoffmann
396a352980 pinctrl: bcm2835: add pull defines to dt bindings
Also delete (unused) private enum from driver.
The pull defines can be used instead if needed.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Stefan Wahren <stefan.wahren@i2se.com>
2016-10-17 09:55:17 -07:00
Sergei Shtylyov
538321bd97 ARM: shmobile: r8a7743: add power domain index macros
Add macros usable by the device tree sources to reference R8A7743 SYSC power
domains by index.

Based on the original (and large) patch by Dmitry Shifrin
<dmitry.shifrin@cogentembedded.com>.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-10-17 08:21:20 +02:00
Chris Brandt
6c35a66656 ARM: dts: r7s72100: add mmcif clock to device tree
Signed-off-by: Chris Brandt <chris.brandt@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-10-17 08:20:02 +02:00
Allan W. Nielsen
4f58e6dceb net: phy: Cleanup the Edge-Rate feature in Microsemi PHYs.
Edge-Rate cleanup include the following:
- Updated device tree bindings documentation for edge-rate
- The edge-rate is now specified as a "slowdown", meaning that it is now
  being specified as positive values instead of negative (both
  documentation and implementation wise).
- Only explicitly documented values for "vsc8531,vddmac" and
  "vsc8531,edge-slowdown" are accepted by the device driver.
- Deleted include/dt-bindings/net/mscc-phy-vsc8531.h as it was not needed.
- Read/validate devicetree settings in probe instead of init

Signed-off-by: Allan W. Nielsen <allan.nielsen@microsemi.com>
Signed-off-by: Raju Lakkaraju <raju.lakkaraju@microsemi.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-14 10:06:13 -04:00
Linus Torvalds
2d2474a194 Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux
Pull thermal managament updates from Zhang Rui:

 - Enhance thermal "userspace" governor to export the reason when a
   thermal event is triggered and delivered to user space. From Srinivas
   Pandruvada

 - Introduce a single TSENS thermal driver for the different versions of
   the TSENS IP that exist, on different qcom msm/apq SoCs'. Support for
   msm8916, msm8960, msm8974 and msm8996 families is also added. From
   Rajendra Nayak

 - Introduce hardware-tracked trip points support to the device tree
   thermal sensor framework. The framework supports an arbitrary number
   of trip points. Whenever the current temperature is changed, the trip
   points immediately below and above the current temperature are found,
   driver callback is invoked to program the hardware to get notified
   when either of the two trip points are triggered. Hardware-tracked
   trip points support for rockchip thermal driver is also added at the
   same time. From Sascha Hauer, Caesar Wang

 - Introduce a new thermal driver, which enables TMU (Thermal Monitor
   Unit) on QorIQ platform. From Jia Hongtao

 - Introduce a new thermal driver for Maxim MAX77620. From Laxman
   Dewangan

 - Introduce a new thermal driver for Intel platforms using WhiskeyCove
   PMIC. From Bin Gao

 - Add mt2701 chip support to MTK thermal driver. From Dawei Chien

 - Enhance Tegra thermal driver to enable soctherm node and set
   "critical", "hot" trips, for Tegra124, Tegra132, Tegra210. From Wei
   Ni

 - Add resume support for tango thermal driver. From Marc Gonzalez

 - several small fixes and improvements for rockchip, qcom, imx, rcar,
   mtk thermal drivers and thermal core code. From Caesar Wang, Keerthy,
   Rocky Hao, Wei Yongjun, Peter Robinson, Bui Duc Phuc, Axel Lin, Hugh
   Kang

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: (48 commits)
  thermal: int3403: Process trip change notification
  thermal: int340x: New Interface to read trip and notify
  thermal: user_space gov: Add additional information in uevent
  thermal: Enhance thermal_zone_device_update for events
  arm64: tegra: set hot trips for Tegra210
  arm64: tegra: set critical trips for Tegra210
  arm64: tegra: add soctherm node for Tegra210
  arm64: tegra: set hot trips for Tegra132
  arm64: tegra: set critical trips for Tegra132
  arm64: tegra: use tegra132-soctherm for Tegra132
  arm: tegra: set hot trips for Tegra124
  arm: tegra: set critical trips for Tegra124
  thermal: tegra: add hw-throttle for Tegra132
  thermal: tegra: add hw-throttle function
  of: Add bindings of hw throttle for Tegra soctherm
  thermal: mtk_thermal: Check return value of devm_thermal_zone_of_sensor_register
  thermal: Add Mediatek thermal driver for mt2701.
  dt-bindings: thermal: Add binding document for Mediatek thermal controller
  thermal: max77620: Add thermal driver for reporting junction temp
  thermal: max77620: Add DT binding doc for thermal driver
  ...
2016-10-12 11:05:23 -07:00
Linus Torvalds
6b25e21fa6 Merge tag 'drm-for-v4.9' of git://people.freedesktop.org/~airlied/linux
Pull drm updates from Dave Airlie:
 "Core:
   - Fence destaging work
   - DRIVER_LEGACY to split off legacy drm drivers
   - drm_mm refactoring
   - Splitting drm_crtc.c into chunks and documenting better
   - Display info fixes
   - rbtree support for prime buffer lookup
   - Simple VGA DAC driver

  Panel:
   - Add Nexus 7 panel
   - More simple panels

  i915:
   - Refactoring GEM naming
   - Refactored vma/active tracking
   - Lockless request lookups
   - Better stolen memory support
   - FBC fixes
   - SKL watermark fixes
   - VGPU improvements
   - dma-buf fencing support
   - Better DP dongle support

  amdgpu:
   - Powerplay for Iceland asics
   - Improved GPU reset support
   - UVD/VEC powergating support for CZ/ST
   - Preinitialised VRAM buffer support
   - Virtual display support
   - Initial SI support
   - GTT rework
   - PCI shutdown callback support
   - HPD IRQ storm fixes

  amdkfd:
   - bugfixes

  tilcdc:
   - Atomic modesetting support

  mediatek:
   - AAL + GAMMA engine support
   - Hook up gamma LUT
   - Temporal dithering support

  imx:
   - Pixel clock from devicetree
   - drm bridge support for LVDS bridges
   - active plane reconfiguration
   - VDIC deinterlacer support
   - Frame synchronisation unit support
   - Color space conversion support

  analogix:
   - PSR support
   - Better panel on/off support

  rockchip:
   - rk3399 vop/crtc support
   - PSR support

  vc4:
   - Interlaced vblank timing
   - 3D rendering CPU overhead reduction
   - HDMI output fixes

  tda998x:
   - HDMI audio ASoC support

  sunxi:
   - Allwinner A33 support
   - better TCON support

  msm:
   - DT binding cleanups
   - Explicit fence-fd support

  sti:
   - remove sti415/416 support

  etnaviv:
   - MMUv2 refactoring
   - GC3000 support

  exynos:
   - Refactoring HDMI DCC/PHY
   - G2D pm regression fix
   - Page fault issues with wait for vblank

  There is no nouveau work in this tree, as Ben didn't get a pull
  request in, and he was fighting moving to atomic and adding mst
  support, so maybe best it waits for a cycle"

* tag 'drm-for-v4.9' of git://people.freedesktop.org/~airlied/linux: (1412 commits)
  drm/crtc: constify drm_crtc_index parameter
  drm/i915: Fix conflict resolution from backmerge of v4.8-rc8 to drm-next
  drm/i915/guc: Unwind GuC workqueue reservation if request construction fails
  drm/i915: Reset the breadcrumbs IRQ more carefully
  drm/i915: Force relocations via cpu if we run out of idle aperture
  drm/i915: Distinguish last emitted request from last submitted request
  drm/i915: Allow DP to work w/o EDID
  drm/i915: Move long hpd handling into the hotplug work
  drm/i915/execlists: Reinitialise context image after GPU hang
  drm/i915: Use correct index for backtracking HUNG semaphores
  drm/i915: Unalias obj->phys_handle and obj->userptr
  drm/i915: Just clear the mmiodebug before a register access
  drm/i915/gen9: only add the planes actually affected by ddb changes
  drm/i915: Allow PCH DPLL sharing regardless of DPLL_SDVO_HIGH_SPEED
  drm/i915/bxt: Fix HDMI DPLL configuration
  drm/i915/gen9: fix the watermark res_blocks value
  drm/i915/gen9: fix plane_blocks_per_line on watermarks calculations
  drm/i915/gen9: minimum scanlines for Y tile is not always 4
  drm/i915/gen9: fix the WaWmMemoryReadLatency implementation
  drm/i915/kbl: KBL also needs to run the SAGV code
  ...
2016-10-11 18:12:22 -07:00
Linus Torvalds
56e520c7a0 IOMMU Updates for Linux v4.9
Including:
 
 	* Support for interrupt virtualization in the AMD IOMMU driver.
 	  These patches were shared with the KVM tree and are already
 	  merged through that tree.
 
 	* Generic DT-binding support for the ARM-SMMU driver. With this
 	  the driver now makes use of the generic DMA-API code. This
 	  also required some changes outside of the IOMMU code, but
 	  these are acked by the respective maintainers.
 
 	* More cleanups and fixes all over the place.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABAgAGBQJX/PmUAAoJECvwRC2XARrjyloP/1hymxXC2yXZ4EIBTHSO5X+c
 jSJaGTIbQAdQDpllscSNJ0Au43L3vGtJcHo4JqwEERNlwLsU82LH7QJhq+q1La/b
 5cPaY5gI3E++qxQt8umuZJAIUQthFYrfGoS5lJc5t5r/d8iVsLWbW4VkR19/1o7A
 4/Uz7ETmi9VVy8Hkvumx+PQ0VHJet381KB7ud9LU5Spim0En2AAGwZXLMkmxXd2W
 uDQ+O1rlDVc2/ka3+GmfZEml5EASWRqS/MTNoU/ZbQGYWKCWygXbuiqt6gLudWjx
 dCR1Knh68b0gN6k/QAj8XY/1gkfmZ3YkfS0AHIMLYTFRT51BuxOrkXrBdkYnWEBv
 UirmaiV87SlR1j83yb3ZmjpBPvd2sGWYFDqY1P0riLutjGUS6zycWWs13olvbfbz
 SFrH7PT7JPQGYprI1oVn4ihszjN1NZ4+Gj7QBhyFW6FtvqTzmaFVsMOlDIeg1FwR
 k8cOzov4NG33Bp4IpsHK8e0/qV6K3oJOiOQgCyQp9kPKK+UWv9v9+HaEA7npJuRV
 c+lTE6j3G4LjEoVybkqm8TiPKxTMVNjUjgA3kwB2yNkCQT7hTCNYIAFrtfCYjYdo
 B1dnFE7feVqtoimnu2qvkVs59hWlF7Hc3RRHoBxMmO8DLwl9n2OcmoQIeCTsviss
 i9aNwC9bzBs+Hd3X/psB
 =1hFE
 -----END PGP SIGNATURE-----

Merge tag 'iommu-updates-v4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu

Pull IOMMU updates from Joerg Roedel:

 - support for interrupt virtualization in the AMD IOMMU driver. These
   patches were shared with the KVM tree and are already merged through
   that tree.

 - generic DT-binding support for the ARM-SMMU driver. With this the
   driver now makes use of the generic DMA-API code. This also required
   some changes outside of the IOMMU code, but these are acked by the
   respective maintainers.

 - more cleanups and fixes all over the place.

* tag 'iommu-updates-v4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (40 commits)
  iommu/amd: No need to wait iommu completion if no dte irq entry change
  iommu/amd: Free domain id when free a domain of struct dma_ops_domain
  iommu/amd: Use standard bitmap operation to set bitmap
  iommu/amd: Clean up the cmpxchg64 invocation
  iommu/io-pgtable-arm: Check for v7s-incapable systems
  iommu/dma: Avoid PCI host bridge windows
  iommu/dma: Add support for mapping MSIs
  iommu/arm-smmu: Set domain geometry
  iommu/arm-smmu: Wire up generic configuration support
  Docs: dt: document ARM SMMU generic binding usage
  iommu/arm-smmu: Convert to iommu_fwspec
  iommu/arm-smmu: Intelligent SMR allocation
  iommu/arm-smmu: Add a stream map entry iterator
  iommu/arm-smmu: Streamline SMMU data lookups
  iommu/arm-smmu: Refactor mmu-masters handling
  iommu/arm-smmu: Keep track of S2CR state
  iommu/arm-smmu: Consolidate stream map entry state
  iommu/arm-smmu: Handle stream IDs more dynamically
  iommu/arm-smmu: Set PRIVCFG in stage 1 STEs
  iommu/arm-smmu: Support non-PCI devices with SMMUv3
  ...
2016-10-11 12:52:41 -07:00
Linus Torvalds
c913fc4146 ARM: SoC: late DT updates for v4.9
These updates have been kept in a separate branch mostly because
 they rely on updates to the respective clk drivers to keep the
 shared header files in sync.
 
 - The Renesas r8a7796 (R-Car M3-W) platform gets added, this is an
   automotive SoC similar to the ⅹ8a7795 chip we already support, but
   the dts changes rely on a clock driver change that has been
   merged for v4.9 through the clk tree.
 
 - The Amlogic meson-gxbb (S905) platform gains support for a few
   drivers merged through our tree, in particular the network and
   usb driver changes are required and included here, and also
   the clk tree changes.
 
 - The Allwinner platforms have seen a large-scale change to their
   clk drivers and the dts file updates must come after that.
   This includes the newly added Nextthing GR8 platform, which is
   derived from sun5i/A13.
 
 - Some integrator (arm32) changes rely on clk driver changes.
 
 - A single patch for lpc32xx has no such dependency but wasn't
   added until just before the merge window
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIVAwUAV/gzeGCrR//JCVInAQKVhw/5AS5R2S7m7VTlWMvGjvH9ITudYhiAGJP1
 z5nP5SwJsfmSjfvw0kSxGUmsNS3rHutsPMz65EesKqFuC3LPZiqMUqrzxt9iqqJx
 I+XdAxDTnOE1RBZFtB9dL+qLzHQ87pMo6R9dfs32sxb3QuCQBYhcFyLmQDuZuHH0
 yeDi3ARFvgxx/qoRUA7cnSlY5RLNzM44y+Ik/ZcVr4ReqYBC2g5mGi5htoiNSLWR
 nwWR+5hNLAp44OZgkZfNsf6kB9brWDQh3PbnBjy6sKXSBoSVIfxTweh2DMJXbZ7l
 1Ck+S7WyLMhGJp448TcuBykr/l9i3uqNh061XavjwP8CAjAdZ787XlnNSztc2pyh
 dvbI/E76pLGb5ZoFdqlY2Syl63ZFN4K8mjZMSPYfYKf85EDIxe4MYwpbo7/pwzh3
 8OlBwH6r4aUMw+QgE1nx8nsjaCoGDMFdgJeJJaWdriZ6Nst2n5gREk/mzbrAWkNG
 ujChn/6hES9LuE21aCp1ipB7qnnyeRinfqz2acEFxMQxuPdjwKrdJqNsBaTWsapE
 Z+b/BFP+LTdPfHCmMSVwfMrNbwsoY7+L4EXXL36lUgOwcDp0vCXA+PiiahYASewA
 1LDQ3CURCEapdBhVU+06Kb4y5eWU7M7EqpOwpHgRJ92dVxgNxuCfcurvxzqPP1UP
 3O4R7bfUTTg=
 =OmAu
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC late DT updates from Arnd Bergmann:
 "These updates have been kept in a separate branch mostly because they
  rely on updates to the respective clk drivers to keep the shared
  header files in sync.

   - The Renesas r8a7796 (R-Car M3-W) platform gets added, this is an
     automotive SoC similar to the ⅹ8a7795 chip we already support, but
     the dts changes rely on a clock driver change that has been merged
     for v4.9 through the clk tree.

   - The Amlogic meson-gxbb (S905) platform gains support for a few
     drivers merged through our tree, in particular the network and usb
     driver changes are required and included here, and also the clk
     tree changes.

   - The Allwinner platforms have seen a large-scale change to their clk
     drivers and the dts file updates must come after that. This
     includes the newly added Nextthing GR8 platform, which is derived
     from sun5i/A13.

   - Some integrator (arm32) changes rely on clk driver changes.

   - A single patch for lpc32xx has no such dependency but wasn't added
     until just before the merge window"

* tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (99 commits)
  ARM: dts: lpc32xx: add device node for IRAM on-chip memory
  ARM: dts: sun8i: Add accelerometer to polaroid-mid2407pxe03
  ARM: dts: sun8i: enable UART1 for iNet D978 Rev2 board
  ARM: dts: sun8i: add pinmux for UART1 at PG
  dts: sun8i-h3: add I2C0-2 peripherals to H3 SOC
  dts: sun8i-h3: add pinmux definitions for I2C0-2
  dts: sun8i-h3: associate exposed UARTs on Orange Pi Boards
  dts: sun8i-h3: split off RTS/CTS for UART1 in seperate pinmux
  dts: sun8i-h3: add pinmux definitions for UART2-3
  ARM: dts: sun9i: a80-optimus: Disable EHCI1
  ARM: dts: sun9i: cubieboard4: Add AXP806 PMIC device node and regulators
  ARM: dts: sun9i: a80-optimus: Add AXP806 PMIC device node and regulators
  ARM: dts: sun9i: cubieboard4: Declare AXP809 SW regulator as unused
  ARM: dts: sun9i: a80-optimus: Declare AXP809 SW regulator as unused
  ARM: dts: sun8i: Add touchscreen node for sun8i-a33-ga10h
  ARM: dts: sun8i: Add touchscreen node for sun8i-a23-polaroid-mid2809pxe04
  ARM: dts: sun8i: Add touchscreen node for sun8i-a23-polaroid-mid2407pxe03
  ARM: dts: sun8i: Add touchscreen node for sun8i-a23-inet86dz
  ARM: dts: sun8i: Add touchscreen node for sun8i-a23-gt90h
  ARM64: dts: meson-gxbb-vega-s95: Enable USB Nodes
  ...
2016-10-07 21:34:49 -07:00
Linus Torvalds
00e729c933 ARM: DT updates for v4.9
These are as usual a very large number of mostly boring updates to
 enable devices in existing machines, or to fix minor bugs.  Notably,
 an ongoing treewide effort to fix warnings caused by an update to the
 device tree compiler. These are enabled with "make W=1" at the moment
 but can hopefully become the default once all issues have been addressed.
 
 No new SoC platform is added this time around (Armada 395 and Orion
 mv88f5181 are slight variations of existing ones), but a significant
 number of new dts files are added, which I list by platform:
 
 - Allwinner: Empire Electronix M712 and iNet d978 Rev2 tablets;
 	Orange Pi PC Plus, Orange Pi 2, Orange Pi Plus 2E,
 	Orange Pi Lite, Olimex A33-Olinuxino, and Nano Pi Neo
 	single-board computers
 
 - ARM Realview: all supported machines (ported from board files)
 
 - Broadcom: BCM958525er, BCM958522er, BCM988312hr, BCM958623hr and
 	BCM958622hr reference boards for Northstar platform;
 	Raspberry Pi Zero single-board computer
 
 - Marvell EBU: Netgear WNR854T router (ported from board file);
 	Armada 395 SoC platform and GP board
 	Armada 390 DB development board
 
 - NXP i.MX: imx7s Warp7 reference board;
 	Gateworks Ventana GW553x single-board computer,
 	Technologic Systems TS-4900 and
 	Engicam IMX6UL GEA M6UL computer-on-module,
 	Inverse Path USB armory board
 
 - Qualcomm: LG Nexus 5 Phone
 
 - Renesas: r8a7792/wheat and r7s72100/rskrza1 development boards
 
 - Rockchip: Rockchip RK3288 Fennec reference board;
 	Firefly RK3288 Reload platform
 
 - ST Microelectronics STi: B2260 (96boards) single-board computer
 
 - TI Davinci: OMAP-L138 LCDK Development kit
 
 - TI OMAP: beagleboard-x15 rev B1 single-board computer
 
 Conflicts: vendor-prefixes.txt has conflicting additions, keep all of
 them in alphabetical order.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIVAwUAV/g11mCrR//JCVInAQIWbw/9FOrBghI2bFqZkDwFE8E3QCpc9bIiETMx
 FMdHV6FAo0D6Yp4EqlWjFI0u0Kn9l4FKz0SYWAigpfT6gfeI1THC2Kl31mslvb5U
 v3QreXI4rKjZS/B1lYECee0os+fNvJcWKj3uFjb4VT1k7T6+MytjHGAQSzwxM66Q
 0Lp5HjdFGDrOXoIUx2eEZkZlVXyQ2EFocMoAsj+s/MHnA8fn1tWW08633kjTsC6y
 9Xj71joghlDKZjA56htaEQ+/6dYdxAHVlvkN7aL9di+2Sc2/ma6my70Zvs4zwtOv
 uJDhcJhjwvf3QtDuOoGhTnFtQYQWaONaGUFyEwYyy2kIwiJy0afep4JCq2o+/CZM
 VMvGXepJpVujE9mg+LwHPgaMYgBhswsJzwQ2ZESrMQcUZ624E18dG2/ei5zat4UN
 5/NvzxEoDGmfQFQUpuoZuPqhwLRauXr7I+u4aliIdtSBGeaA2T1yFT4pVgNUOxBQ
 0bMtE2QSUKyaF+xAHLTsV7yheDU0S+C7zVkLPwePK0V7vUFuBsdQiXEqXh/6MSq0
 iYVPmKwNTIHK3qMiGtm8XDugjR8Pf0tCXRqIWJMlXs75rCAsKfFW4j4XYnlO4wMy
 dP2fdoe0xA+zthR0hRHD5i8WCmISeUgtPAdFyTid1jZkMk1AzM0AqBUdAqTInvQ3
 O4JSYcjBWoo=
 =/gg/
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM DT updates from Arnd Bergmann:
 "These are as usual a very large number of mostly boring updates to
  enable devices in existing machines, or to fix minor bugs. Notably, an
  ongoing treewide effort to fix warnings caused by an update to the
  device tree compiler. These are enabled with "make W=1" at the moment
  but can hopefully become the default once all issues have been
  addressed.

  No new SoC platform is added this time around (Armada 395 and Orion
  mv88f5181 are slight variations of existing ones), but a significant
  number of new dts files are added, which I list by platform:

   - Allwinner: Empire Electronix M712 and iNet d978 Rev2 tablets,
     Orange Pi PC Plus, Orange Pi 2, Orange Pi Plus 2E, Orange Pi Lite,
     Olimex A33-Olinuxino, and Nano Pi Neo single-board computers

   - ARM Realview: all supported machines (ported from board files)

   - Broadcom: BCM958525er, BCM958522er, BCM988312hr, BCM958623hr and
     BCM958622hr reference boards for Northstar platform, Raspberry Pi
     Zero single-board computer

   - Marvell EBU: Netgear WNR854T router (ported from board file),
     Armada 395 SoC platform and GP board Armada 390 DB development
     board

   - NXP i.MX: imx7s Warp7 reference board, Gateworks Ventana GW553x
     single-board computer, Technologic Systems TS-4900 and Engicam
     IMX6UL GEA M6UL computer-on-module, Inverse Path USB armory board

   - Qualcomm: LG Nexus 5 Phone

   - Renesas: r8a7792/wheat and r7s72100/rskrza1 development boards

   - Rockchip: Rockchip RK3288 Fennec reference board, Firefly RK3288
     Reload platform

   - ST Microelectronics STi: B2260 (96boards) single-board computer

   - TI Davinci: OMAP-L138 LCDK Development kit

   - TI OMAP: beagleboard-x15 rev B1 single-board computer"

* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (390 commits)
  ARM: dts: sony-nsz-gs7: add missing unit name to /memory node
  ARM: dts: chromecast: add missing unit name to /memory node
  ARM: dts: berlin2q-marvell-dmp: add missing unit name to /memory node
  ARM: dts: berlin2: Add missing unit name to /soc node
  ARM: dts: berlin2cd: Add missing unit name to /soc node
  ARM: dts: berlin2q: Add missing unit name to /soc node
  ARM: dts: berlin2: Remove skeleton.dtsi inclusion
  ARM: dts: berlin2cd: Remove skeleton.dtsi inclusion
  ARM: dts: berlin2q: Remove skeleton.dtsi inclusion
  arm: dts: berlin2q: enable all wdt nodes unconditionally
  arm: dts: berlin2: enable all wdt nodes unconditionally
  ARM: dts: omap5-igep0050.dts: Use tabs for indentation
  ARM: dts: Fix igepv5 power button GPIO direction
  ARM: dts: am335x-evmsk: Add blue-and-red-wiring -property to lcdc node
  ARM: dts: am335x-evmsk: Whitespace cleanup of lcdc related nodes
  ARM: dts: am335x-evm: Add blue-and-red-wiring -property to lcdc node
  ARM: dts: s3c64xx: Use macros for pinctrl configuration
  ARM: dts: s3c2416: Use macros for pinctrl configuration
  ARM: dts: s5pv210: Use macros for pinctrl configuration
  ARM: dts: s3c64xx: Use common macros for pinctrl configuration
  ...
2016-10-07 21:29:04 -07:00
Linus Torvalds
6afd563d4b ARM: SoC driver updates for v4.9
Driver updates for ARM SoCs, including a couple of newly added drivers:
 
 - The Qualcomm external bus interface 2 (EBI2), used in some of their
   mobile phone chips for connecting flash memory, LCD displays or
   other peripherals
 
 - Secure monitor firmware for Amlogic SoCs, and an NVMEM driver for the
   EFUSE based on that firmware interface.
 
 - Perf support for the AppliedMicro X-Gene performance monitor unit
 
 - Reset driver for STMicroelectronics STM32
 
 - Reset driver for SocioNext UniPhier SoCs
 
 Aside from these, there are minor updates to SoC-specific bus,
 clocksource, firmware, pinctrl, reset, rtc and pmic drivers.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIVAwUAV/gaimCrR//JCVInAQJaOQ/6A++YfLVmdF4wxgcu/0ti28lA7SkQIGJV
 UAsfCmqMEutbeDvnloVGmTV2K2NS7mzxdxsJGbVB7Oe/zdOFN+T9sf9hAlId01QA
 oVkoagpofoxlyKoKJ/l+heuEEZMa0Ekk3XXRTGv/Ovymo7252o4tEdGu9c+gyaMJ
 KqgixcrQRzxuWDgPpHUPUez2vY1iRMvvdcb0EmfiHcIgPOEJc6MIxulsqEIrkoMz
 WYeGFIeqRJxnrur3QD8WnD+aZD6bV01wkFTkWXGWg4H87QfEESgVBu5A7TL+5sL8
 1SlX/b7S5/ZJbrOiOS2IUyvbK7NiA/Q+NunHW2rMVnUWuEvJ9HAQB1kVSQH5LIYO
 6OBokjcijm6m/j6O6fdDfvNd6PLsIEUqfWVws7O+uofMMqKPxqak4VBTRdFM+aeF
 ZtK7mEbzteCX0bnC+XblZrseAlkIehYnP80CLDbtDTerTWP4gsjxGVt3U6MO0NzB
 K0ACWZOclzrcFscNKrmP6uPCpfZriiPV/XMCEHcylA/X2iYsVmpqKzdLuNs5aeUr
 uPzQbNWu9ygg/bDRXMYY2E3Kzjsc0eIOKEOPyhLaZdSo4e1FQxud6L2V2Vj0RLB/
 iMA7/CyQZqn6Yzgs0VMZm/bnh+hIdHioGFl5K5j6Fcw9VZRkNmnEQJzX4VU5efGO
 g1+5av0vFXg=
 =GvTq
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC driver updates from Arnd Bergmann:
 "Driver updates for ARM SoCs, including a couple of newly added
  drivers:

   - The Qualcomm external bus interface 2 (EBI2), used in some of their
     mobile phone chips for connecting flash memory, LCD displays or
     other peripherals

   - Secure monitor firmware for Amlogic SoCs, and an NVMEM driver for
     the EFUSE based on that firmware interface.

   - Perf support for the AppliedMicro X-Gene performance monitor unit

   - Reset driver for STMicroelectronics STM32

   - Reset driver for SocioNext UniPhier SoCs

  Aside from these, there are minor updates to SoC-specific bus,
  clocksource, firmware, pinctrl, reset, rtc and pmic drivers"

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (50 commits)
  bus: qcom-ebi2: depend on HAS_IOMEM
  pinctrl: mvebu: orion5x: Generalise mv88f5181l support for 88f5181
  clk: mvebu: Add clk support for the orion5x SoC mv88f5181
  dt-bindings: EXYNOS: Add Exynos5433 PMU compatible
  clocksource: exynos_mct: Add the support for ARM64
  perf: xgene: Add APM X-Gene SoC Performance Monitoring Unit driver
  Documentation: Add documentation for APM X-Gene SoC PMU DTS binding
  MAINTAINERS: Add entry for APM X-Gene SoC PMU driver
  bus: qcom: add EBI2 driver
  bus: qcom: add EBI2 device tree bindings
  rtc: rtc-pm8xxx: Add support for pm8018 rtc
  nvmem: amlogic: Add Amlogic Meson EFUSE driver
  firmware: Amlogic: Add secure monitor driver
  soc: qcom: smd: Reset rx tail rather than tx
  memory: atmel-sdramc: fix a possible NULL dereference
  reset: hi6220: allow to compile test driver on other architectures
  reset: zynq: add driver Kconfig option
  reset: sunxi: add driver Kconfig option
  reset: stm32: add driver Kconfig option
  reset: socfpga: add driver Kconfig option
  ...
2016-10-07 21:23:40 -07:00
Linus Torvalds
d042380886 - Core Frameworks
- Add the MFD bindings doc to MAINTAINERS
 
 - New Drivers
    - X-Powers AC100 Audio CODEC and RTC
    - TI LP873x PMIC
    - Rockchip RK808 PMIC
    - Samsung Exynos Low Power Audio
 
  - New Device Support
    - Add support for STMPE1600 variant to stmpe
    - Add support for PM8018 PMIC to pm8921-core
    - Add support for AXP806 PMIC in axp20x
    - Add support for AXP209 GPIO in axp20x
 
  - New Functionality
    - Add support for Reset to all STMPE variants
    - Add support for MKBP event support to cros_ec
    - Add support for USB to intel_soc_pmic_bxtwc
    - Add support for IRQs and Power Button to tps65217
 
  - Fix-ups
    - Clean-up defunct author emails; da9063, max14577
    - Kconfig fixups; wm8350-i2c, as3722
    - Constify; altera-a10sr, sm501
    - Supply PCI IDs; intel-lpss-pci
    - Improve clocking; qcom_rpm
    - Fix IRQ probing; ucb1x00-core
    - Ensure fault log is cleared; da9052
    - Remove NO_IRQ check; ucb1x00-core
    - Supply I2C properties; intel-lpss-acpi, intel-lpss-pci
    - Non standard declaration; tps65217, max8997-irq
    - Remove unused code; lp873x, db8500-prcmu, ab8500-debugfs,
                          cros_ec_spi
    - Make non-modular; altera-a10sr, intel_msic, smsc-ece1099,
                        sun6i-prcm, twl-core,
    - OF bindings; ac100, stmpe, qcom-pm8xxx, qcom-rpm, rk808,
                   axp20x, lp873x, exynos5433-lpass, act8945a,
                   aspeed-scu, twl6040, arizona
 
  - Bug Fixes
    - Release OF pointer; qcom_rpm
    - Avoid double shifting in suspend/resume; 88pm80x
    - Fix 'defined but not used' error; exynos-lpass
    - Fix 'sleeping whilst attomic'; atmel-hlcdc
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABCAAGBQJX9giOAAoJEFGvii+H/Hdh8aEP/iiHosBZsksZ4we8KAdoXkxi
 x5nnJvS9+4b5yaasSiN8e2xs9YMOlHu1CNZDZ3RJZ+rLusdVeg5ju5p5WED83pvi
 ltiPMhyqruM3d0rieTRHxeJFmmEf2exwKV3Y+5lo9586dFfJrmGp2AxScId4TtwP
 CcsjwYRx/WvVfWrv1xWsjd9b1RDlWglt3dcVhdKAQbvPPOy5O4ymXNMFs0DuFyZ+
 2A16sw7hdYenXSvAHlZzS5IqXP9JEeosu3O/mUUZKF3PO55t+KbQBGZiwXoal4gp
 1dwrdBjlrZaHcDa5Ra9x+jQ2kxIkyUT44CXKAHa7llTfZQkZIgnv/fWUhB8C5JxU
 iaqnN9rWQ2MNjt3Us/n1TSJH2kEnSNbzrQixE0n8yjIBsZePWlW2ZpWYRF7GPG2i
 2pB8oNz/NdDkKWdosR3ArnseNOKVcC+GtD+mHk0aKMPghPq+gDIRrdM0CFyWeIZE
 w/Cf+HHZPR0O1VuYZ9bHIhbgnEbz5xUADOtBAdppIBQiNEI/G9lJpG6Ft4FTQoPi
 CIbnnB/wxxMaEl85rUPYGkxQniuUI5f0tMv3k2ZtAZMKcqn6iXtiIOuXceM2vUdy
 ze1uddH4HuHLcrJT5x+J72XJL6RXzZKxOqd0b7BcXnvMVFJrWgleH1JQ2WqazAEW
 il1u28IkFusm/BW/0dps
 =Ja7p
 -----END PGP SIGNATURE-----

Merge tag 'mfd-for-linus-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd

Pull MFD updates from Lee Jones:
 "Core framework:
   - Add the MFD bindings doc to MAINTAINERS

  New drivers:
   - X-Powers AC100 Audio CODEC and RTC
   - TI LP873x PMIC
   - Rockchip RK808 PMIC
   - Samsung Exynos Low Power Audio

  New device support:
   - Add support for STMPE1600 variant to stmpe
   - Add support for PM8018 PMIC to pm8921-core
   - Add support for AXP806 PMIC in axp20x
   - Add support for AXP209 GPIO in axp20x

  New functionality:
   - Add support for Reset to all STMPE variants
   - Add support for MKBP event support to cros_ec
   - Add support for USB to intel_soc_pmic_bxtwc
   - Add support for IRQs and Power Button to tps65217

  Fix-ups:
   - Clean-up defunct author emails (da9063, max14577)
   - Kconfig fixups (wm8350-i2c, as37220
   - Constify (altera-a10sr, sm501)
   - Supply PCI IDs (intel-lpss-pci)
   - Improve clocking (qcom_rpm)
   - Fix IRQ probing (ucb1x00-core)
   - Ensure fault log is cleared (da9052)
   - Remove NO_IRQ check (ucb1x00-core)
   - Supply I2C properties (intel-lpss-acpi, intel-lpss-pci)
   - Non standard declaration (tps65217, max8997-irq)
   - Remove unused code (lp873x, db8500-prcmu, ab8500-debugfs,
     cros_ec_spi)
   - Make non-modular (altera-a10sr, intel_msic, smsc-ece1099,
     sun6i-prcm, twl-core)
   - OF bindings (ac100, stmpe, qcom-pm8xxx, qcom-rpm, rk808, axp20x,
     lp873x, exynos5433-lpass, act8945a, aspeed-scu, twl6040, arizona)

  Bugfixes:
   - Release OF pointer (qcom_rpm)
   - Avoid double shifting in suspend/resume (88pm80x)
   - Fix 'defined but not used' error (exynos-lpass)
   - Fix 'sleeping whilst attomic' (atmel-hlcdc)"

* tag 'mfd-for-linus-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (69 commits)
  mfd: arizona: Handle probe deferral for reset GPIO
  mfd: arizona: Remove arizona_of_get_named_gpio helper function
  mfd: arizona: Add DT options for max_channels_clocked and PDM speaker config
  mfd: twl6040: Register child device for twl6040-pdmclk
  mfd: cros_ec_spi: Remove unused variable 'request'
  mfd: omap-usb-host: Return value is not 'const int'
  mfd: ab8500-debugfs: Remove 'weak' function suspend_test_wake_cause_interrupt_is_mine()
  mfd: ab8500-debugfs: Remove ab8500_dump_all_banks_to_mem()
  mfd: db8500-prcmu: Remove unused *prcmu_set_ddr_opp() calls
  mfd: ab8500-debugfs: Prevent initialised field from being over-written
  mfd: max8997-irq: 'inline' should be at the beginning of the declaration
  mfd: rk808: Fix RK818_IRQ_DISCHG_ILIM initializer
  mfd: tps65217: Fix nonstandard declaration
  mfd: lp873x: Remove unused mutex lock from struct lp873x
  mfd: atmel-hlcdc: Do not sleep in atomic context
  mfd: exynos-lpass: Mark PM functions as __maybe_unused
  mfd: intel-lpss: Add default I2C device properties for Apollo Lake
  mfd: twl-core: Make it explicitly non-modular
  mfd: sun6i-prcm: Make it explicitly non-modular
  mfd: smsc-ece1099: Make it explicitly non-modular
  ...
2016-10-07 08:35:35 -07:00
Linus Torvalds
687ee0ad4e Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking updates from David Miller:

 1) BBR TCP congestion control, from Neal Cardwell, Yuchung Cheng and
    co. at Google. https://lwn.net/Articles/701165/

 2) Do TCP Small Queues for retransmits, from Eric Dumazet.

 3) Support collect_md mode for all IPV4 and IPV6 tunnels, from Alexei
    Starovoitov.

 4) Allow cls_flower to classify packets in ip tunnels, from Amir Vadai.

 5) Support DSA tagging in older mv88e6xxx switches, from Andrew Lunn.

 6) Support GMAC protocol in iwlwifi mwm, from Ayala Beker.

 7) Support ndo_poll_controller in mlx5, from Calvin Owens.

 8) Move VRF processing to an output hook and allow l3mdev to be
    loopback, from David Ahern.

 9) Support SOCK_DESTROY for UDP sockets. Also from David Ahern.

10) Congestion control in RXRPC, from David Howells.

11) Support geneve RX offload in ixgbe, from Emil Tantilov.

12) When hitting pressure for new incoming TCP data SKBs, perform a
    partial rathern than a full purge of the OFO queue (which could be
    huge). From Eric Dumazet.

13) Convert XFRM state and policy lookups to RCU, from Florian Westphal.

14) Support RX network flow classification to igb, from Gangfeng Huang.

15) Hardware offloading of eBPF in nfp driver, from Jakub Kicinski.

16) New skbmod packet action, from Jamal Hadi Salim.

17) Remove some inefficiencies in snmp proc output, from Jia He.

18) Add FIB notifications to properly propagate route changes to
    hardware which is doing forwarding offloading. From Jiri Pirko.

19) New dsa driver for qca8xxx chips, from John Crispin.

20) Implement RFC7559 ipv6 router solicitation backoff, from Maciej
    Żenczykowski.

21) Add L3 mode to ipvlan, from Mahesh Bandewar.

22) Support 802.1ad in mlx4, from Moshe Shemesh.

23) Support hardware LRO in mediatek driver, from Nelson Chang.

24) Add TC offloading to mlx5, from Or Gerlitz.

25) Convert various drivers to ethtool ksettings interfaces, from
    Philippe Reynes.

26) TX max rate limiting for cxgb4, from Rahul Lakkireddy.

27) NAPI support for ath10k, from Rajkumar Manoharan.

28) Support XDP in mlx5, from Rana Shahout and Saeed Mahameed.

29) UDP replicast support in TIPC, from Richard Alpe.

30) Per-queue statistics for qed driver, from Sudarsana Reddy Kalluru.

31) Support BQL in thunderx driver, from Sunil Goutham.

32) TSO support in alx driver, from Tobias Regnery.

33) Add stream parser engine and use it in kcm.

34) Support async DHCP replies in ipconfig module, from Uwe
    Kleine-König.

35) DSA port fast aging for mv88e6xxx driver, from Vivien Didelot.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1715 commits)
  mlxsw: switchx2: Fix misuse of hard_header_len
  mlxsw: spectrum: Fix misuse of hard_header_len
  net/faraday: Stop NCSI device on shutdown
  net/ncsi: Introduce ncsi_stop_dev()
  net/ncsi: Rework the channel monitoring
  net/ncsi: Allow to extend NCSI request properties
  net/ncsi: Rework request index allocation
  net/ncsi: Don't probe on the reserved channel ID (0x1f)
  net/ncsi: Introduce NCSI_RESERVED_CHANNEL
  net/ncsi: Avoid unused-value build warning from ia64-linux-gcc
  net: Add netdev all_adj_list refcnt propagation to fix panic
  net: phy: Add Edge-rate driver for Microsemi PHYs.
  vmxnet3: Wake queue from reset work
  i40e: avoid NULL pointer dereference and recursive errors on early PCI error
  qed: Add RoCE ll2 & GSI support
  qed: Add support for memory registeration verbs
  qed: Add support for QP verbs
  qed: PD,PKEY and CQ verb support
  qed: Add support for RoCE hw init
  qede: Add qedr framework
  ...
2016-10-05 10:11:24 -07:00
Raju Lakkaraju
a4cc96d1f0 net: phy: Add Edge-rate driver for Microsemi PHYs.
Edge-rate:
As system and networking speeds increase, a signal's output transition,
also know as the edge rate or slew rate (V/ns), takes on greater importance
because high-speed signals come with a price. That price is an assortment of
interference problems like ringing on the line, signal overshoot and
undershoot, extended signal settling times, crosstalk noise, transmission
line reflections, false signal detection by the receiving device and
electromagnetic interference (EMI) -- all of which can negate the potential
gains designers are seeking when they try to increase system speeds through
the use of higher performance logic devices. The fact is, faster signaling
edge rates can cause a higher level of electrical noise or other type of
interference that can actually lead to slower line speeds and lower maximum
system frequencies. This parameter allow the board designers to change the
driving strange, and thereby change the EMI behavioral.

Edge-rate parameters (vddmac, edge-slowdown) get from Device Tree.

Tested on Beaglebone Black with VSC 8531 PHY.

Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microsemi.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-04 00:47:30 -04:00
Wei Ni
6c7c324570 thermal: tegra: add hw-throttle for Tegra132
Tegra132 use CCROC throttle registers to configure
pulse skiper, set these registers to enable throttle
function for Tegra132.

Signed-off-by: Wei Ni <wni@nvidia.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2016-09-27 14:02:32 +08:00
Lucas Stach
b1d51b448e clk: imx6: fix i.MX6DL clock tree to reflect reality
The current clock tree only implements the minimal set of differences
between the i.MX6Q and the i.MX6DL, but that doesn't really reflect
reality.

Apply the following fixes to match the RM:
- DL has no GPU3D_SHADER_SEL/PODF, the shader domain is clocked by
  GPU3D_CORE
- GPU3D_SHADER_SEL/PODF has been repurposed as GPU2D_CORE_SEL/PODF
- GPU2D_CORE_SEL/PODF has been repurposed as MLB_SEL/PODF

Cc: stable@vger.kernel.org
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-09-20 16:52:37 -07:00
Kalle Kankare
377d6479d2 clk: imx53: Add clocks configuration
Add clocks configuration for CSI, FIRI and IEEE1588.

Signed-off-by: Fabien Lahoudere <fabien.lahoudere@collabora.co.uk>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-09-20 16:52:06 -07:00
Arnd Bergmann
53570cbc18 Amlogic driver updates for v4.9, 2nd round
- media: update IR support for newer SoCs
 - firmware: add secure monitor driver
 - net: new stmmac glue driver
 - usb: udd DWC2 support for meson-gxbb
 - clocks: expose more clock IDs for use by DT
 - DT binding updates
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJX2Z0aAAoJEFk3GJrT+8ZlkxoQAI0FJkQ371touZbMRSirMCdG
 fyx7ZZWGntw9yHCqcfVGLxy6oBk6bABWOWJzqGIBeTyn7qDoOqc4ec+pIWg7KECS
 h/yrJLGPQofI0Hm/6nzZikrjrK1h74c6bhkjRsAfqKCyq0AcEnH8cu1kAZmkwyJq
 osU1U/MhRLkIs6UZsc6H2nlsbSw8Ji4ZkSDfT/1P4SUqHgtz9k5PNYCEkPDGK23F
 1f1N3zYpqJVqAqucdLhTBsE56vSVzrAXLEsIwpaYCpEzuRO8MyjYP7SiKnky/5Za
 WAxz+hKufleqvvDqIK1zWvE/in4SyHrg9eVSHac/xbbDsUKy11RuJ2VasqT6xUOM
 r8oi0o1ot0IkMCJrA1Ogey0GqcSoyVUzy5FM+4SOz+M7IctLt7ZV0aVDmfXvG21f
 iQLZ7bPmgaj2kck95ppqc8saz0EIt32fJBaI3XvoG9PTpQeoYI7vok2k1l06kYQI
 3U6r7Zui4mj9PE2aFAEe3BpY2EbJDj8Vn+mtX4NtkCwS0PwZKkiUgZXF3H/qix3T
 +jv9yps2dLhihd4y6RcySVM3/PWuM7A8tU9oRBE+sttf2MiQzXvMPNM/GH0qOVEI
 3flZ6tsSLmj8jmFyOdqaxz8MuDo9KNi9b+AijPqWm+D0UfPPqFKnR6bvM4F496Dx
 4fG2a7JtDJUAz8e++Jtc
 =DlpW
 -----END PGP SIGNATURE-----

Merge tag 'amlogic-drivers-2' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into next/late

Pull "Amlogic driver updates for v4.9, 2nd round" from Kevin Hilman:

- media: update IR support for newer SoCs
- firmware: add secure monitor driver
- net: new stmmac glue driver
- usb: udd DWC2 support for meson-gxbb
- clocks: expose more clock IDs for use by DT
- DT binding updates

* tag 'amlogic-drivers-2' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: (21 commits)
  clk: gxbb: expose i2c clocks
  clk: gxbb: expose USB clocks
  clk: gxbb: expose spifc clock
  clk: gxbb: expose MPLL2 clock for use by DT
  Documentation: dt-bindings: Add documentation for the Meson USB2 PHYs
  usb: dwc2: add support for Meson8b and GXBB SoCs
  net: stmmac: update the module description of the dwmac-meson driver
  net: stmmac: add a glue driver for the Amlogic Meson 8b / GXBB DWMAC
  stmmac: introduce get_stmmac_bsp_priv() helper
  net: dt-bindings: Document the new Meson8b and GXBB DWMAC bindings
  clk: meson-gxbb: Export PWM related clocks for DT
  meson: clk: Add support for clock gates
  gxbb: clk: Adjust MESON_GATE macro to be shared with meson8b
  clk: meson: Copy meson8b CLKID defines to private header file
  meson: clk: Rename register names according to Amlogic datasheet
  meson: clk: Move register definitions to meson8b.h
  clk: meson: Rename meson8b-clkc.c to reflect gxbb naming convention
  nvmem: amlogic: Add Amlogic Meson EFUSE driver
  firmware: Amlogic: Add secure monitor driver
  media: rc: meson-ir: Add support for newer versions of the IR decoder
  ...
2016-09-19 17:49:07 +02:00
Arnd Bergmann
2008ee090c Topic branch for Samsung DeviceTree cleanup for 4.9.
Replace in DT sources hard-coded values for pinctrl configuration like pull
 up/down, drive strength and function. This makes the DTS easier to read,
 especially that some drive strengths values are quite non-obvious.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJX3r13AAoJEME3ZuaGi4PX1yUQAIgtpY7loocP8eZnvKSxL0Sv
 mFDpDIyTot75P4enDJ762rqk12dyEKfBwOAhw3s1oFOUQyVKC+vQaC0Rg2xtGSPH
 b+SBGSi8qhtjp3Idw6LNxgDYlgaKSbAVjIDNl4Wb6se0/CsV2yWrHpUT0oPuxlEb
 zUe9qmBzuDvYkLiHiHSKtGFw0Slg1XiTS82Jp0xvpX8OwYNjz1AYJAsnsFcns0RH
 aNtMlndVq7qVMyJnksnKm7E4DCAqLEesV9h7dqDDAnqgBKN40PK4uN2yjkA/YCra
 ZbrLf5BTHDnEbaoctVwTjXh5uFDK0Jdu/F7U6XKKOxM9Ld7+0SVSeOJozK0Noi2S
 7UN57Dga4xRzaDqQp0Bh7nucUeEsMPuVYiwG89e+LEYkCkF+P0hG38l3tMMxA6XA
 8SDqeeTyEYu8q+2olFlkCFCqpOU/WcIdoWfbwbVgxRlx9UmaC6h7bmURLlHIsl5l
 U1iGubxuGc3QEBi8rrFKNoImTnTqwfffwcLEawCGcji+qNRKV0gZUGW/gceLs4Db
 7M3Vw43pM9Z1yc2R2D+LVLWaa7FUYAajD5zyAZ4Czhr2G3ZW670LVHp0PU8nqCGj
 5Yo5nkNEiutyQ/77wp72aEzrFv9rOlpm8XY4kuZ3RRFzYSt6xbZYS1oO7QGk9Tey
 DqAIGXIaU80bT87Hc7A3
 =NN8A
 -----END PGP SIGNATURE-----

Merge tag 'samsung-dt-pinctrl-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/dt

Pull "Topic branch for Samsung DeviceTree cleanup for 4.9" from Krzysztof Kozłowski:

Replace in DT sources hard-coded values for pinctrl configuration like pull
up/down, drive strength and function. This makes the DTS easier to read,
especially that some drive strengths values are quite non-obvious.

* tag 'samsung-dt-pinctrl-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  ARM: dts: s3c64xx: Use macros for pinctrl configuration
  ARM: dts: s3c2416: Use macros for pinctrl configuration
  ARM: dts: s5pv210: Use macros for pinctrl configuration
  ARM: dts: s3c64xx: Use common macros for pinctrl configuration
  ARM: dts: exynos: Fix mismatched values of SD drive strengh configuration on exynos4415
  ARM: dts: exynos: Fix mismatched value for SD4 pull up/down configuration on exynos4210
  ARM: dts: exynos: Use macros for pinctrl configuration on exynos542x/exynos5800
  ARM: dts: exynos: Use macros for pinctrl configuration on exynos5410
  ARM: dts: exynos: Use macros for pinctrl configuration on exynos5260
  ARM: dts: exynos: Use macros for pinctrl configuration on exynos5250
  ARM: dts: exynos: Use macros for pinctrl configuration on exynos4415
  ARM: dts: exynos: Use macros for pinctrl configuration on exynos4x12
  ARM: dts: exynos: Use macros for pinctrl configuration on exynos4210
  ARM: dts: exynos: Use macros for pinctrl configuration on exynos3250
  ARM: dts: exynos: Use common macros for pinctrl configuration
  pinctrl: dt-bindings: samsung: Update documentation with new macros
  pinctrl: dt-bindings: samsung: Add header with values used for configuration
2016-09-19 17:46:56 +02:00
Vivek Gautam
dc19b6f5be clk: Add USB3 PHY reset lines
Adding missing reset lines for USB 3.0 PHY.

Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-09-16 16:19:50 -07:00
Krzysztof Kozlowski
5db7e3bb87 pinctrl: dt-bindings: samsung: Add header with values used for configuration
Hard-coded pinctrl configuration values are scattered through DTS files.
The numbers are difficult to decode by human, especially without the
datasheet.  Additionally the drive strength differs between S3C64xx,
S5PV210 and Exynos SoC families increasing the confusion.

The header will help making this more readable and maintainable.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
2016-09-16 13:31:31 +02:00
Jun Nie
ca0233285a clk: zx: register ZX296718 clocks
The ZX296718 clocks are statically listed and registered. More
clock will be added later.

Signed-off-by: Jun Nie <jun.nie@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-09-14 13:50:33 -07:00
Jerome Brunet
dfdd7d4af6 clk: gxbb: expose i2c clocks
I2C and AO_I2C clocks are needed for the i2c driver, expose to DT
(and comment out in clk driver)

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2016-09-14 11:24:04 -07:00
Martin Blumenstingl
5dbe7890e6 clk: gxbb: expose USB clocks
USB0_DDR_BRIDGE and USB1_DDR_BRIDGE1 are needed for the related
dwc2 usb controller. USB, USB0 and USB1 are needed for the PHYs.
Expose these clocks to DT and comment out in clk driver.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2016-09-14 11:23:55 -07:00
Jerome Brunet
f2120a8b09 clk: gxbb: expose spifc clock
SPI clock is needed for the spifc driver, expose to DT
(and comment out in the clk driver)

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2016-09-14 11:22:49 -07:00
Martin Blumenstingl
ed6f4b5180 clk: gxbb: expose MPLL2 clock for use by DT
This exposes the MPLL2 clock as this is one of the input clocks of the
ethernet controller's internal mux.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2016-09-14 11:22:49 -07:00
Stephen Boyd
de64f5c87d Allwinner Clock changes for 4.9
Four more SoCs converted to the new clock framework (A31, A31s, A23 and
 A33).
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJX1beIAAoJEBx+YmzsjxAgFNQQAIMCbooFBVbNTzSesGwGLBVl
 uRxO8FP8mPZPM0forHq6N6973no0l5H15I9w3x4T0ozkX18KwsI/dj8Q8ZiAl/S8
 gqo8rZARBBKy4rspQQazqFytSCZF+KznDigChhA1KeyG6fbob2bKdYtMRppH+l8F
 A3HpreGcqKrWv6rBEshYSt9fzFJeoi0W7Uzb0v4wQXuXuVDq/Zpp+fcu+2to/fOO
 CaI2Dh8Glcfn3gDwk7cZ94NTZud81B/zLqulcOSTV8CP1KQ/ovs6K8UvsziCCw0J
 oMD4t6kfK8BwCt1hsZTA9XjgIT0Hx1rj7wcTApa88BEea+hU0ulXiwdI1mB/x1TU
 E880Rp0KIDoldaUBggYTut/vTBWwpOP6lTRWp/EoGfs9Br9VEu1X0wzlihBdAhsQ
 IhR27GK1wp1fw0ahTFKCYNWTU5fl8iy40gGDqjpaAXnlqMEmIcEthyqdie/n83o+
 HvpUhfp9emnrXn5+y3uNeGc9M3O5BxpuyIjY4jChc5zOrrqvSAio1ifHP0TNDHEe
 ZW3TJSoqU8QfCaQTJKxVzC2LG0ZXIjwTepFtqrx5DrFOkc1M3tYod0L/80nau99v
 gVghFmaPVnS8HWmuKjlh/jXsI4AqcoESF9kv3bmecDuDc5cWIHkcI/97lsGpXIS8
 rSteIQUjRbQkwuo4TyA8
 =Ff/R
 -----END PGP SIGNATURE-----

Merge tag 'sunxi-clk-for-4.9' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into clk-next

Pull Allwinner clock driver changes from Maxime Ripard:

Four more SoCs converted to the new clock framework (A31, A31s, A23 and
A33).

* tag 'sunxi-clk-for-4.9' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux:
  clk: sunxi-ng: Add hardware dependency
  clk: sunxi-ng: Add A23 CCU
  clk: sunxi-ng: Add A33 CCU support
  clk: sunxi-ng: Add N-class clocks support
  clk: sunxi-ng: mux: Add mux table macro
  clk: sunxi-ng: div: Allow to set a maximum
  clk: sunxi-ng: div: Add kerneldoc for the _ccu_div structure
  clk: sunxi-ng: div: Add mux table macros
  clk: sunxi-ng: Add A31/A31s clocks
  clk: sunxi-ng: mux: Add clk notifier functions
  clk: sunxi-ng: mux: support fixed pre-dividers on multiple parents
  clk: sunxi-ng: mux: Add support for mux tables
  clk: sunxi-ng: mux: Rename mux macro to be consistent
  clk: sunxi-ng: nkm: Add mux to support multiple parents
  clk: sunxi-ng: mux: Increase fixed pre-divider div size
2016-09-14 11:10:15 -07:00
Stephen Boyd
3db385ea14 In addition to a few clean up and code consolidation patches this
includes:
 - addition of sound subsystem related clocks for Exynos5410 SoC
   (EPLL, PDMA) and support for "samsung,exynos5410-audss-clock"
   compatible in the clk-exynos-audss driver,
 - addition of DRAM controller related clocks for exynos5420,
 - MAINTAINERS update adding Chanwoo Choi as the Samsung SoC
   clock drivers co-maintainer.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABCAAGBQJX0thBAAoJEE1bIKeAnHqLjhwP/1sNlCVU30OQYAsVOG8doaL2
 tP4vQmxKWREMK+gg1iWyq6dhAWhOO/YdSL9KgvHAkCKolJfpoGfJjiPm0Pja+TOq
 pIHOdE5ql2Cb+PxeJoLQZxfcOsNczt0OorVWgeTJdDyB+/VXaGvVKYwoZFSUoQ5m
 nIPfAut5ynIVIk86EBjuSr61sUMoTEzVD7HFGAzYF78K4UPIsscfM43UWSHXqwiX
 rsxPZTzjETmtmjSPSP+m8mOY04nds0kFDWSPaP6lzmSQYC7jhGQxM7Pl4fmWBYho
 gqL1z4gcp4vHZYRHhtClOuKe1+dlXNRLRaFQSRgIFgpfX/AfQh0Hj35I7QhCmD3N
 LDNTWmiFxLVjPET0Z4NykPRzCfIcWYT4S2U2qJ857C2FG1v3DD/xiZ13UvbySTNi
 nh/Go6Jp1bbPRQMYxCcMY1a1RJ180qjsNCleC5/5w6KP0DWWJFVDcqFr3NLcmN7e
 nikD31moCKLEvPrd2Glezajv1IHD6K/c06cBcTHGBu2BobOrsBstTvjiIfDcjtC/
 uZymcsWUztPaM1iPLJ0Dzsrw2TkGcukrYm3R4kN4iRzDJK5XPh4dFUgquJOYlyNH
 PgYGBMXocMrBXNOF9lQ9mAsiO9JCfZLjXH9k2NP3w2P0YNTTSfIjBuBvySSiGK6x
 aYF0CXwKNDfJhmep+PzE
 =lEKC
 -----END PGP SIGNATURE-----

Merge tag 'clk-v4.9-samsung' of git://linuxtv.org/snawrocki/samsung into clk-next

Pull samsung clk driver updates from Sylwester Nawrocki:

In addition to a few clean up and code consolidation patches this
includes:
- addition of sound subsystem related clocks for Exynos5410 SoC
  (EPLL, PDMA) and support for "samsung,exynos5410-audss-clock"
  compatible in the clk-exynos-audss driver,
- addition of DRAM controller related clocks for exynos5420,
- MAINTAINERS update adding Chanwoo Choi as the Samsung SoC
  clock drivers co-maintainer.

* tag 'clk-v4.9-samsung' of git://linuxtv.org/snawrocki/samsung:
  clk: samsung: Add support for EPLL on exynos5410
  clk: samsung: clk-exynos-audss: Whitespace and debug trace cleanup
  clk: samsung: clk-exynos-audss: Add exynos5410 compatible
  clk: samsung: clk-exynos-audss: controller variant handling rework
  clk: samsung: Use common registration function for pll2550x
  clk: samsung: exynos5410: Expose the peripheral DMA gate clocks
  clk: samsung: exynos5420: Add clocks for CMU_CDREX domain
  clk: samsung: exynos5410: Use samsung_cmu_register_one() to simplify code
  clk: samsung: exynos5260: Move struct samsung_cmu_info to init section
  MAINTAINERS: Add myself as Samsung SoC clock drivers co-maintainer
  clk: samsung: exynos5410: Add clock IDs for PDMA and EPLL clocks
  clk: samsung: Add clock IDs for the CMU_CDREX (DRAM Express Controller)
2016-09-14 11:06:47 -07:00
Arnd Bergmann
e08644b0c7 Amlogic 64-bit DT changes for v4.9
- add watchdog, reset, IR remote, PWM
 - add secure monitor and eFuse
 - add always-on (AO) domain clock and reset
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJXyhPZAAoJEFk3GJrT+8ZlIQkP/1Xyb2A483CPDL4JZP/BHDjd
 DXLpjTeiL7JVtfCdjRNFL1mOMEwtbhjuwklRsBaHIGGHg8TK26RJAdxzmRPtZ2fd
 U8wLrSRCdesF6bwI4j8zomm2tAD3a0Ujik21AROKZj1pWh/n9k0m+CrPgwBCZoA9
 yM1/usSP0Gm0kLWgH1mwVjGJOgf7Xi6TGHBsNyy1zl+Jj4uTf+aB6auHygemznvi
 cANjibsOFY+KvcE19/y/yGJL7nFeln9C6TE1igDh2m/e+FR0+Ng3p1qtZxb2jsnv
 TOFROdTyEjPN9tmJQxoJfjpY2PUXE1rKezGnJBVBtpCijvSVl39goDvobUajFJ67
 g5O483kwsjEqx7uOvl4WU/kFqw2HunpILSR5QuJJ15n9kxVN+tNeAjIxo/dG7wgD
 8Byeu5FGa2va6YNEkQF7UGagKIgIloG1N59OkFwLWwMem/xtd1nuiSoLlyuw82/C
 EXu9N2I9UbOA3s6sEEJBazvtk+ueHaENwIFLo5yPDOLCKmt8/ii4dV4QWzn9R7Zy
 d2NZpNjPj/eBRDC6O+MgJVAEuikjvfn9tUcuVQGjJ+pq3mtpAxzdclVHMYlKclON
 /ykQqRZPE33CDRBdp5TCbJp/UMyXyjhdhcaAaY7yYPpjkEjFEaLWTMH7wua04754
 K57RdpXb1kQG7qGAy9xF
 =UZHB
 -----END PGP SIGNATURE-----

Merge tag 'amlogic-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into next/late

Pull "Amlogic 64-bit DT changes for v4.9" from Kevin Hilman:

- add watchdog, reset, IR remote, PWM
- add secure monitor and eFuse
- add always-on (AO) domain clock and reset

* tag 'amlogic-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
  ARM64: dts: amlogic: gxbb: Enable NVMEM
  documentation: Add nvmem bindings documentation
  ARM64: dts: amlogic: gxbb: Enable secure monitor
  documentation: Add secure monitor bindings documentation
  ARM64: dts: meson-gxbb: Add PWM pinctrl nodes
  ARM64: dts: meson-gxbb: Enable the the IR decoder on supported boards
  ARM64: dts: meson-gxbb: Add Infrared Remote Controller decoder
  dt-bindings: media: meson-ir: Add Meson8b and GXBB compatible strings
  ARM64: dts: amlogic: add the input pin for the IR remote
  ARM64: dts: meson-gxbb: Add GXBB AO Clock and Reset node
  clk: meson: Fix invalid use of sizeof in gxbb_aoclkc_probe()
  clk: meson: Add GXBB AO Clock and Reset controller driver
  dt-bindings: clock: reset: Add GXBB AO Clock and Reset Bindings
  ARM64: DTS: meson-gxbb: switch ethernet to real clock
  ARM64: dts: amlogic: meson-gxbb: Add watchdog node
2016-09-14 17:34:35 +02:00
Arnd Bergmann
1f480960e0 32bit Rockchip devicetree changes containing two new rk3288 boards (Fennec
and Firefly-reload), display support for the rk3288-evb, support for the
 recently added firmware reboot-flag support and some housekeeping cleanups.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABCAAGBQJX0WScAAoJEPOmecmc0R2BEycIAK7/5hV5kyeEA3vx1VaLoRH0
 lFHMQyaucbqQCuAu6U6NBwyVGnirvd5HG+KRA34RncLfVT5Fnv81u43byKkaUI/I
 8NH6l4FvcND76J1IIR6XZl8cGxaRCT1bkUgII4MFaMaQBxY19gbLCDuBVLVJEhK7
 lUy7lG/6j/DvIwU0UevGdB/bdCPZ0WZ6n9InF4xIMJ6PJYI5/BctSpxfJr47hTjQ
 a0z637dqXv08L7LRqVtXn+1tJZ6QJdHrtsEavGFOQEzl+n2rRFuBC63+v98h7WCc
 1gnyfWbR+NMZOH13imBiOiK7Ap/F5Qm1uF5bfJhoJGbGazv5NcZqPlZ0CocrAXY=
 =gktZ
 -----END PGP SIGNATURE-----

Merge tag 'v4.9-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt

Pull "Rockchip dts32 changes for 4.9" from Heiko Stübner:

32bit Rockchip devicetree changes containing two new rk3288 boards (Fennec
and Firefly-reload), display support for the rk3288-evb, support for the
recently added firmware reboot-flag support and some housekeeping cleanups.

* tag 'v4.9-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  ARM: dts: rockchip: Add sensor-supplies on PopMetal-RK3288 board
  ARM: dts: rockchip: fix L3G4200D i2c address on PopMetal-RK3288 board
  ARM: dts: rockchip: enable usbotg for Popemtal-rk3288 board
  ARM: dts: rockchip: add missing regulators for firefly reload board
  ARM: dts: rockchip: remove excess sd properties from firefly reload
  ARM: dts: rockchip: add syscon-reboot-mode DT node
  soc: rockchip: add reboot-mode header
  ARM: dts: rockchip: move rk3288 usbphy under the GRF node
  ARM: dts: rockchip: add rk3288-firefly-reload
  ARM: dts: rockchip: add dts for RK3288-Fennec boards
  ARM: dts: rockchip: add the panel power supply for rk3288-evb board with rk808 pmu
  ARM: dts: rockchip: add the panel power supply for rk3288-evb board with act8846 pmu
  ARM: dts: rockchip: add eDP/panel display device nodes for rk3288-evb
2016-09-13 17:38:34 +02:00
Dave Airlie
8506912b96 Merge branch 'drm-tda998x-devel' of git://git.armlinux.org.uk/~rmk/linux-arm into drm-next
This adds the ASoC codec interfaces for TDA998x HDMI audio from
Jyri Sarha.

* 'drm-tda998x-devel' of git://git.armlinux.org.uk/~rmk/linux-arm:
  ARM: dts: am335x-boneblack: Add HDMI audio support
  drm/i2c: tda998x: Register ASoC hdmi-codec and add audio DT binding
  drm/i2c: tda998x: Improve tda998x_configure_audio() audio related pdata
2016-09-13 10:28:17 +10:00
Maxime Ripard
d05c748bd7 clk: sunxi-ng: Add A33 CCU support
This commit introduces the clocks found in the Allwinner A33 CCU.

Since this SoC is very similar to the A23, and we share a significant share
of the DTSI, the clock IDs that are going to be used will also be shared
with the A23, hence the name of the various header files.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
2016-09-10 11:41:19 +02:00
Sylwester Nawrocki
1d9aa64c37 clk: samsung: Use common registration function for pll2550x
There is no such significant differences in pll2550x PLL type
to justify a separate registration function.  This patch adapts
exynos5440 driver to use the common function and removes
samsung_clk_register_pll2550x().

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
2016-09-09 17:35:10 +02:00
Sylwester Nawrocki
58d6506f32 clk: samsung: exynos5410: Add clock IDs for PDMA and EPLL clocks
The PDMA{0,1} and EPLL clock IDs are added separately in this
patch so the patch can be merged to the arm-soc tree as dependency.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
2016-09-09 10:13:02 +02:00
Chanwoo Choi
3b6b717218 clk: samsung: Add clock IDs for the CMU_CDREX (DRAM Express Controller)
This patch adds missing clock IDs for CMU_CDREX (DRAM Express Controller)
which generates clocks for DRAM and NoC (Network on Chip) busses.

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
2016-09-09 10:11:44 +02:00
Jyri Sarha
7e567624dc drm/i2c: tda998x: Register ASoC hdmi-codec and add audio DT binding
Register ASoC HDMI codec for audio functionality and adds device tree
binding for audio configuration.

With the registered HDMI codec the tda998x node can be used like a
regular codec node in ASoC card configurations. HDMI audio info-frame
and audio stream header is generated by the ASoC HDMI codec. The codec
also applies constraints for available sample-rates based on Edid Like
Data from the display. The device tree binding document has been
updated [1].

Part of this patch has been inspired by Jean Francoise's "drm/i2c: tda998x:
Add support of a DT graph of ports"-patch [2]. There may still be some
identical lines left from the original patch and some of the ideas
have come from there.

[1] Documentation/devicetree/bindings/display/bridge/tda998x.txt
[2] http://mailman.alsa-project.org/pipermail/alsa-devel/2015-July/095255.html

Signed-off-by: Jyri Sarha <jsarha@ti.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2016-09-07 13:10:10 +01:00
Stephen Boyd
9bb87c027c The biggest addition is probably the special clock-type for ddr clock
control. While reading that clock is done the normal way from the
 registers, setting it always requires some sort of special handling
 to let the system survive this addition.
 
 As the commit message explains, there are currently 3 handling-types
 known. General SRAM-based code on rk3288 and before (which is waiting
 essentially for the PIE support that is currently being worked on),
 SCPI-based clk setting on the rk3368 through a coprocessor, which we
 might support once the support for legacy scpi-variants has matured
 and now on the rk3399 (and probably later) using a dcf controller that
 is controlled from the arm-trusted-firmware and gets accessed through
 firmware calls from the kernel. This is the variant we currently
 support, but the clock type is made to support the other variants in
 the future as well.
 
 Apart from that slightly bigger chunk, we have a mix of PLL rates,
 clock-ids and flags mainly for the rk3399.
 
 And interestingly an iomap fix for the legacy gate driver, where I
 hopefully could deter the submitter from actually using that in any
 new works.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABCAAGBQJXzrz5AAoJEPOmecmc0R2B0NMH/0SGrQnrUsaq0cvjZPaq8jTD
 nJDVIRw099HNM3QZCfy+FZbSsnmex93clX+Fn4UdehplrCZ8ExX1wpPkMwvFcPJF
 M34YyFXx5MU9OmDsJXd1UlGRD/mH0L6hKnmfBQiPbK33ObXbr7LCC1L3go+oYABN
 eHaOzO1KIcdoCQd6RlVAQHCsiDy8akUJ68P2uACHZ7VVgvGw2f3NdJhOKTD5lCuf
 WH/MRo9X9bPDGHpFJIX+mZzZgYsMqUjyF/mYU/VMoH70w+YZTnfcbrYpJ0VkgBYd
 aQF2B9VXhed9EQG3Gfu+jgsWoWLed9AJf83UP6eMsPTPLNQBqgzoDZwylbY1Szk=
 =LjDG
 -----END PGP SIGNATURE-----

Merge tag 'v4.9-rockchip-clk1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into clk-next

Pull rockchip clk driver updates from Heiko Stuebner:

The biggest addition is probably the special clock-type for ddr clock
control. While reading that clock is done the normal way from the
registers, setting it always requires some sort of special handling
to let the system survive this addition.

As the commit message explains, there are currently 3 handling-types
known. General SRAM-based code on rk3288 and before (which is waiting
essentially for the PIE support that is currently being worked on),
SCPI-based clk setting on the rk3368 through a coprocessor, which we
might support once the support for legacy scpi-variants has matured
and now on the rk3399 (and probably later) using a dcf controller that
is controlled from the arm-trusted-firmware and gets accessed through
firmware calls from the kernel. This is the variant we currently
support, but the clock type is made to support the other variants in
the future as well.

Apart from that slightly bigger chunk, we have a mix of PLL rates,
clock-ids and flags mainly for the rk3399.

And interestingly an iomap fix for the legacy gate driver, where I
hopefully could deter the submitter from actually using that in any
new works.

* tag 'v4.9-rockchip-clk1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  clk: rockchip: use the dclk_vop_frac clock ids on rk3399
  clk: rockchip: drop CLK_SET_RATE_PARENT from rk3399 fractional dividers
  clk: rockchip: add 2016M to big cpu clk rate table on rk3399
  clk: rockchip: add rk3399 ddr clock support
  clk: rockchip: add dclk_vop_frac ids for rk3399 vop
  clk: rockchip: add new clock-type for the ddrclk
  soc: rockchip: add header for ddr rate SIP interface
  clk: rockchip: add SCLK_DDRC id for rk3399 ddrc
  clk: rockchip: handle of_iomap failures in legacy clock driver
  clk: rockchip: mark rk3399 hdcp_noc and vio_noc as critical
  clk: rockchip: use general clock flag when registering pll
  clk: rockchip: delete the CLK_IGNORE_UNUSED from aclk_pcie on rk3399
  clk: rockchip: add 65MHz and 106.5MHz rates to rk3399 plls used for HDMI
2016-09-06 18:12:24 -07:00
Chris Brandt
969244f9c7 ARM: dts: r7s72100: add ethernet clock to device tree
Signed-off-by: Chris Brandt <chris.brandt@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-09-05 14:32:39 +02:00
Yakir Yang
e33075db73 clk: rockchip: add dclk_vop_frac ids for rk3399 vop
Export the dclk_vop_frac out, so we can set the dclk_vop as the
child of dclk_vop_frac, and then we can start to take use of
the fractional dividers.

Signed-off-by: Yakir Yang <ykk@rock-chips.com>
Signed-off-by: Chris Zhong <zyw@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-09-04 22:15:11 +02:00
Michael Turquette
e918a18d2e Merge branch 'clk-meson-gxbb' into clk-next 2016-09-02 18:13:40 -07:00
Neil Armstrong
19a2a85d71 clk: meson-gxbb: Export PWM related clocks for DT
Add the PWM related clocks in order to be referenced as PWM source
clocks.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Michael Turquette <mturquette@baylibre.com>
Link: lkml.kernel.org/r/1471870177-10609-1-git-send-email-narmstrong@baylibre.com
2016-09-02 16:33:30 -07:00
Alexander Müller
0f32e64b22 clk: meson: Copy meson8b CLKID defines to private header file
Only expose future CLKID constants if necessary. This patch
removes CLK_NR_CLKS from the DT bindings but leaves all previously
defined CLKIDs there to keep backward compatibility.

Signed-off-by: Alexander Müller <serveralex@gmail.com>
Signed-off-by: Michael Turquette <mturquette@baylibre.com>
Link: lkml.kernel.org/r/1472319654-59048-5-git-send-email-serveralex@gmail.com
2016-09-01 17:31:52 -07:00
Michael Turquette
1bf13f4825 Merge remote-tracking branch 'clk/clk-meson-gxbb-ao' into clk-meson-gxbb 2016-09-01 17:31:33 -07:00
Lin Huang
7fbdfcd687 clk: rockchip: add SCLK_DDRC id for rk3399 ddrc
Add the needed id for the ddr clock.

Signed-off-by: Lin Huang <hl@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-08-31 18:19:03 +02:00
Neil Armstrong
eb87a669dd mfd: qcom-rpm: Add support for pm8018 RPM Regulator
In order to support the Qualcomm MDM9615 SoC, add support for the
RPM regulator entries in the qcom-rpm driver.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-08-31 09:33:43 +01:00
Chen-Yu Tsai
c6e6c96d8f clk: sunxi-ng: Add A31/A31s clocks
Add a new style driver for the clock control unit in Allwinner A31/A31s.

A few clocks are still missing:

    - MIPI PLL's HDMI mode support
    - EMAC clock

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-08-25 22:31:43 +02:00
Srinivas Kandagatla
62d157587e clk: gcc-msm8996: add missing pcie phy reset lines
This patch adds missing 2 PCIE common reset lines.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-08-25 13:02:33 -07:00
Maxime Coquelin
ca9f71f057 dt-bindings: mfd: Add STM32F4 RCC numeric constants into DT include file
Ths patch lists STM32F4's RCC numeric constants.
It will be used by clock and reset drivers, and DT bindings.

Signed-off-by: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-08-24 15:21:26 +02:00
Honghui Zhang
615cca8c0c iommu/mediatek: dt-binding: Correct the larb port offset defines for mt2701
larb2 have 23 ports, the LARB3_PORT_OFFSET should be LARB2_PORT_OFFSET
plus larb2's port number, it should be 44 instead of 43.

Signed-off-by: Honghui Zhang <honghui.zhang@mediatek.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2016-08-22 12:52:10 +02:00
Rajendra Nayak
63bb4fd6a3 clk: qcom: gdsc: Add the missing BIMC gdsc for msm8996
Add BIMC gdsc data found in MMCC part of msm8996 family of devices.

Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-08-19 12:55:19 -07:00
Stephen Boyd
43d6912417 Merge branch 'clk-meson-gxbb-ao' into clk-next
* clk-meson-gxbb-ao:
  clk: meson: Add GXBB AO Clock and Reset controller driver
  dt-bindings: clock: reset: Add GXBB AO Clock and Reset Bindings
2016-08-19 12:51:14 -07:00
Neil Armstrong
edb89f126f dt-bindings: clock: reset: Add GXBB AO Clock and Reset Bindings
Add documentations and dt-bindings headers for the AO clock and reset
controller.

Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-08-19 12:49:00 -07:00
Shunli Wang
c3c5768346 reset: mediatek: Add MT2701 reset controller dt-binding file
Dt-binding file about reset controller is used to provide
kinds of definition, which is referenced by dts file and
IC-specified reset controller driver code.

Signed-off-by: Shunli Wang <shunli.wang@mediatek.com>
Signed-off-by: James Liao <jamesjj.liao@mediatek.com>
Signed-off-by: Erin Lo <erin.lo@mediatek.com>
Tested-by: John Crispin <blogic@openwrt.org>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-08-19 12:47:20 -07:00
Shunli Wang
1de9b21633 clk: mediatek: Add dt-bindings for MT2701 clocks
Add MT2701 clock dt-bindings, include topckgen, apmixedsys,
infracfg, pericfg and subsystem clocks.

Signed-off-by: Shunli Wang <shunli.wang@mediatek.com>
Signed-off-by: James Liao <jamesjj.liao@mediatek.com>
Signed-off-by: Erin Lo <erin.lo@mediatek.com>
Tested-by: John Crispin <blogic@openwrt.org>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-08-19 12:18:41 -07:00
Stephen Boyd
cd1e29a93c Merge branch 'clk-qcom-9615' into clk-next
* clk-qcom-9615:
  dt-bindings: clock: Update bindings for MDM9615 GCC and LCC
  clk: mdm9615: Add support for MDM9615 Clock Controllers
  dt-bindings: Add MDM9615 DT bindings include files for GCC and LCC
2016-08-15 16:08:49 -07:00
Neil Armstrong
f7508fedd8 dt-bindings: Add MDM9615 DT bindings include files for GCC and LCC
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-08-15 15:51:18 -07:00
Stephen Boyd
ddf7e5377b Merge branch 'clk-meson-gxbb' into clk-next
* clk-meson-gxbb:
  clk: gxbb: add MMC gate clocks, and expose for DT
2016-08-15 15:47:15 -07:00
Kevin Hilman
33608dcd01 clk: gxbb: add MMC gate clocks, and expose for DT
Add the SD/eMMC gate clocks and expose them for use by DT.

While at it, also explose FCLK_DIV2 since this is one of the input
clocks to the mux internal to each of the SD/eMMC blocks.

Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-08-15 15:45:57 -07:00