* 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86, earlyprintk: Move mrst early console to platform/ and fix a typo
x86, apbt: Setup affinity for apb timers acting as per-cpu timer
ce4100: Add errata fixes for UART on CE4100
x86: platform: Move iris to x86/platform where it belongs
x86, mrst: Check platform_device_register() return code
x86/platform: Add Eurobraille/Iris power off support
x86, mrst: Add explanation for using 1960 as the year offset for vrtc
x86, mrst: Fix dependencies of "select INTEL_SCU_IPC"
x86, mrst: The shutdown for MRST requires the SCU IPC mechanism
x86: Ce4100: Add reboot_fixup() for CE4100
ce4100: Add PCI register emulation for CE4100
x86: Add CE4100 platform support
x86: mrst: Set vRTC's IRQ to level trigger type
x86: mrst: Add audio driver bindings
rtc: Add drivers/rtc/rtc-mrst.c
x86: mrst: Add vrtc driver which serves as a wall clock device
x86: mrst: Add Moorestown specific reboot/shutdown support
x86: mrst: Parse SFI timer table for all timer configs
x86/mrst: Add SFI platform device parsing code
Found one x2apic pre-enabled system, x2apic_mode suddenly get
corrupted after register some cpus, when compiled
CONFIG_NR_CPUS=255 instead of 512.
It turns out that generic_processor_info() ==> phyid_set(apicid,
phys_cpu_present_map) causes the problem.
phys_cpu_present_map is sized by MAX_APICS bits, and pre-enabled
system some cpus have an apic id > 255.
The variable after phys_cpu_present_map may get corrupted
silently:
ffffffff828e8420 B phys_cpu_present_map
ffffffff828e8440 B apic_verbosity
ffffffff828e8444 B local_apic_timer_c2_ok
ffffffff828e8448 B disable_apic
ffffffff828e844c B x2apic_mode
ffffffff828e8450 B x2apic_disabled
ffffffff828e8454 B num_processors
...
Actually phys_cpu_present_map is referenced via apic id, instead
index. We should use MAX_LOCAL_APIC instead MAX_APICS.
For 64-bit it will be 32768 in all cases. BSS will increase by 4k bytes
on 64-bit:
text data bss dec filename
21696943 4193748 12787712 38678403 vmlinux.before
21696943 4193748 12791808 38682499 vmlinux.after
No change on 32bit.
Finally we can remove MAX_APCIS that was rather confusing.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: H. Peter Anvin <hpa@linux.intel.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
LKML-Reference: <4D23BD9C.3070102@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Fix a hard-coded limit of a maximum of 16 cpu's per socket.
The UV Broadcast Assist Unit code initializes by scanning the
cpu topology of the system and assigning a master cpu for each
socket and UV hub. That scan had an assumption of a limit of 16
cpus per socket. With Westmere we are going over that limit.
The UV hub hardware will allow up to 32.
If the scan finds the system has gone over that limit it returns
an error and we print a warning and fall back to doing TLB
shootdowns without the BAU.
Signed-off-by: Cliff Wickman <cpw@sgi.com>
Cc: <stable@kernel.org> # .37.x
LKML-Reference: <E1PZol7-0000mM-77@eag09.americas.sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Calling alloc_bootmem() for tiny chunks of memory over and over is really
slow; on an XO-1, it caused the time between when the kernel started
booting and when the display came alive (post-lxfb probe) to increase
to 44s. This patch optimizes the prom_early_alloc function by
calling alloc_bootmem for 4k-sized blocks of memory, and handing out
chunks of that to callers. With this patch, the time between kernel load
and display initialization decreased to 23s. If there's a better way to
do this early in the boot process, please let me know.
(Note: increasing the chunk size to 16k didn't noticably affect boot time,
and wasted 9k.)
v4: clarify comment, requested by hpa
v3: fix wasted memory buglet found by Milton Miller, and style fix.
v2: reorder prom_early_alloc as suggested by Grant.
Signed-off-by: Andres Salomon <dilinger@queued.net>
LKML-Reference: <20101129153951.74202a84@queued.net>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Make use of PROC_DEVICETREE to export the tree, and sparc's PROMTREE code to
call into OLPC's Open Firmware to build the tree.
v5: fix buglet with root node check (introduced in v4)
v4: address some minor style issues pointed out by Grant, and explicitly cast
negative phandle checks to s32.
v3: rename olpc_prom to olpc_dt
- rework Kconfig entries
- drop devtree build hook from proc, instead adding a call to x86's
paging_init (similarly to how sparc64 does it)
- switch allocation from using slab to alloc_bootmem. this allows
the DT to be built earlier during boot (during setup_arch); the
downside is that there are some 1200 bootmem reservations that are
done during boot. Not ideal..
- add a helper olpc_ofw_is_installed function to test for the
existence and successful detection of OLPC's OFW.
Signed-off-by: Andres Salomon <dilinger@queued.net>
LKML-Reference: <20101116220952.26526a80@queued.net>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
There are 3 places defining similar functions of saving IRQ vector
info into mp_irqs[] array: mmparse/acpi/mrst.
Replace the redundant code by a common function in io_apic.c as it's
only called when CONFIG_X86_IO_APIC=y
Signed-off-by: Feng Tang <feng.tang@intel.com>
Cc: Alan Cox <alan@linux.intel.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <20101207133204.4d913c5a@feng-i7>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
register_lapic_address() and mp_sfi_register_lapic_address() are
almost identical. Use the common function.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Len Brown <lenb@kernel.org>
LKML-Reference: <4CFDF693.6000908@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Move the code to arch/x86/platform/mrst/. Also fix a typo to use
the correct config option: ONFIG_EARLY_PRINTK_MRST
Signed-off-by: Feng Tang <feng.tang@intel.com>
Cc: alan@linux.intel.com
LKML-Reference: <1291348298-21263-1-git-send-email-feng.tang@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This patch enables the UART on the CE4100. The UART has a couple of
issues that need to be worked around. First the UART is mostly PC
compatible except that it is clocked eight times faster than a
standard PC so the default configuration provided in
arch/x86/include/asm/serial.h needs to be overridden. Second the TX
interrupt may not be set correctly all the time. Lastly accessing the
UART via I/O space for early_prink() hangs the chip when the IOAPIC is
enabled.
A custom mem_serial_in() is provided to work around the TX interrupt
issue. The configuration issues are dealt with in the call back
registered with the 8250 driver via serial8250_set_isa_configurator()
Signed-off-by: Dirk Brandewie <dirk.brandewie@gmail.com>
LKML-Reference: <1290436128-17958-1-git-send-email-dirk.brandewie@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
platform_device_register() may fail, if so propagate the return
code from mrst_device_create().
Signed-off-by: Vasiliy Kulikov <segoon@openwall.com>
LKML-Reference: <1290104207-31279-1-git-send-email-segoon@openwall.com>
Acked-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
This patch for SGI UV systems addresses a problem whereby
interrupt transactions being looped back from a local IOH,
through the hub to a local CPU can (erroneously) conflict with
IO port operations and other transactions.
To workaound this we set a high bit in the APIC IDs used for
interrupts. This bit appears to be ignored by the sockets, but
it avoids the conflict in the hub.
Signed-off-by: Dimitri Sivanich <sivanich@sgi.com>
LKML-Reference: <20101116222352.GA8155@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
___
arch/x86/include/asm/uv/uv_hub.h | 4 ++++
arch/x86/include/asm/uv/uv_mmrs.h | 19 ++++++++++++++++++-
arch/x86/kernel/apic/x2apic_uv_x.c | 25 +++++++++++++++++++++++--
arch/x86/platform/uv/tlb_uv.c | 2 +-
arch/x86/platform/uv/uv_time.c | 4 +++-
5 files changed, 49 insertions(+), 5 deletions(-)
When setting up the mpc_intsrc structure for vRTC's IRQ,
we need to set its irqflag to level trigger, otherwise
it will be taken as edge triggered and the vRTC IRQ will
fire only once, as there is never a EOI issued from the
IA core for it.
The original code worked in previous kernel. This is because it
was configured to level trigger type by luck. It fell
into the default PCI trigger category which is level triggered.
Signed-off-by: Feng Tang <feng.tang@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
LKML-Reference: <20101111155019.12924.569.stgit@localhost.localdomain>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This patch adds the sound card bindings for Moorestown (pmic_audio) and
the Medfield platform (msic_audio) as IPC devices. This ensures they will be
created at the right time.
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
LKML-Reference: <20101110174044.11340.78008.stgit@localhost.localdomain>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Provide the standard kernel rtc driver interface on top of the vrtc layer
added in the previous patch.
Signed-off-by: Feng Tang <feng.tang@intel.com>
LKML-Reference: <20101110172911.3311.20593.stgit@localhost.localdomain>
[Fixed swapped arguments on IPC]
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
[Cleaned up and the device creation moved to arch/x86/platform]
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Moorestown platform doesn't have a m146818 RTC device like traditional
x86 PC, but a firmware emulated virtual RTC device(vrtc), which provides
some basic RTC functions like get/set time. vrtc serves as the only
wall clock device on Moorestown platform.
[ tglx: Changed the exports to _GPL ]
Signed-off-by: Feng Tang <feng.tang@intel.com>
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
LKML-Reference: <20101110172837.3311.40483.stgit@localhost.localdomain>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Moorestowns needs to use a special IPC command to reboot or shutdown the
platform.
Signed-off-by: Alek Du <alek.du@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
LKML-Reference: <20101110164928.6365.94243.stgit@localhost.localdomain>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The [vk][cmz]alloc(_node) family of functions return void
pointers which it's completely unnecessary/pointless to cast to
other pointer types since that happens implicitly.
This patch removes such casts from arch/x86.
Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Cc: trivial@kernel.org
Cc: amd64-microcode@amd64.org
Cc: Andreas Herrmann <andreas.herrmann3@amd.com>
LKML-Reference: <alpine.LNX.2.00.1011082310220.23697@swampdragon.chaosbits.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Penwell has APB timer based watchdog timers, it requires platform code to parse
SFI MTMR tables in order to claim its timer.
This patch will always parse SFI MTMR regardless of system timer configuration
choices. Otherwise, SFI MTMR table may not get parsed if running on Medfield
with always-on local APIC timers and constant TSC. Watchdog timer driver will
then not get a timer to use.
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
LKML-Reference: <20101109112800.20591.10802.stgit@localhost.localdomain>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
SFI provides a series of tables. These describe the platform devices present
including SPI and I²C devices, as well as various sensors, keypads and other
glue as well as interfaces provided via the SCU IPC mechanism (intel_scu_ipc.c)
This patch is a merge of the core elements and relevant fixes from the
Intel development code by Feng, Alek, myself into a single coherent patch
for upstream submission.
It provides the needed infrastructure to register I2C, SPI and platform devices
described by the tables, as well as handlers for some of the hardware already
supported in kernel. The 0.8 firmware also provides GPIO tables.
Devices are created at boot time or if they are SCU dependant at the point an
SCU is discovered. The existing Linux device mechanisms will then handle the
device binding. At an abstract level this is an SFI to Linux device translator.
Device/platform specific setup/glue is in this file. This is done so that the
drivers for the generic I²C and SPI bus devices remain cross platform as they
should.
(Updated from RFC version to correct the emc1403 name used by the firmware
and a wrongly used #define)
Signed-off-by: Alek Du <alek.du@linux.intel.com>
LKML-Reference: <20101109112158.20013.6158.stgit@localhost.localdomain>
[Clean ups, removal of 0.7 support]
Signed-off-by: Feng Tang <feng.tang@linux.intel.com>
[Clean ups]
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
x86 has finally arrived in the embedded nightmare and will rapidly
grow SoC platform support in various flavours. So we need a place for
the platform support files. That also allows us to clean up the
dumpground which arch/x86/kernel has become over time.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
